95
Series Ecoline 504
Sockets for Plastic Leaded Chip Carriers
(PLCC)
Solder tail
“Ecoline Series 504”
PLCC sockets are de-
signed for JEDEC type
substrates and will oper-
ate safely under normal
to moderately severe
conditions
Bottom cover is designed
to minimize danger of
flux wicking and brown
PPS insulator (RYTON R-4)
with ventilation zone un-
derneath component
greatly improves heat dis-
sipation
Plating Stamped contacts
99 tin-lead over nickel
Please note: 99 is the only plating available for
this product.
Ordering information
For standard part numbers please refer to table Order Codes
For PCB hole patterns see page 94
No.
of Order Codes Dimensions
poles
A1A2B1B2C1C2E
20 504-99-020-24-000 15.56 15.56 5.08 5.08 9.62 9.62 18.06
28 504-99-028-24-000 18.10 18.10 7.62 7.62 11.90 11.90 21.70
*32* 504-99-032-24-000 18.10 20.64 7.62 10.16 11.84 14.40 23.70
44 504-99-044-24-000 23.18 23.18 12.70 12.70 17.00 17.00 28.50
52 504-99-052-24-000 25.72 25.72 15.24 15.24 19.50 19.50 32.46
68 504-99-068-24-000 30.80 30.80 20.32 20.32 24.65 24.65 39.94
84 504-99-084-24-000 35.88 35.88 25.40 25.40 29.65 29.65 47.00
100 504-99-100-24-000 not available from stock, please consult
* rectangular
