Technical Data Issue 8 / May 2006 AT502 30 Micron Aluminium Foil Tape General description A 30 micron aluminium foil, coated one side with an acrylic, pressure sensitive adhesive.The tape is backed with a strong polythene coated release paper. Flame retardant and self extinguishing Good high temperature resistance Easy unwind and tear Water resistant Aggressive adhesive Excellent water vapour resistance Specification Type test certificate available* to show conformance to BS476 Part 6 Class O and Part 7 Category 1. Certification to the following standards may be available on request. BS3887 : 1991. Technical Details Typical values Thickness 0.07mm Breaking Load 12 N/cm Elongation 5% Adhesion Steel 3.6 N/cm After Water 3.6 N/cm Immersion RoHS compliant Yes Service Temperature -20C to +110C Application Temperature 0C to +40C Storage Temperature +12C to +25C *Standard charge for certificate: 25.00. Advance Tapes International Limited, PO Box 122, Abbey Meadows, Leicester, LE4 5RA. Tel: 0116 251 0191. Fax: 0116 265 2046. www.advancetapes.com NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes.The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant `Technical Data Sheet'. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the `Technical Data Sheet'. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs.