Technical Data
Advance Tapes International Limited,PO Box 122,
Abbey Meadows,Leicester, LE4 5RA.
Tel:0116 251 0191.Fax: 0116 265 2046. www.advancetapes.com
General description
A 30 micron aluminium foil,coated one side with an acr ylic, pressure sensitive
adhesive.The tape is backed with a strong polythene coated release paper.
Flame retardant and self extinguishing
Good high temperature resistance
Easy unwind and tear
Water resistant
Aggressive adhesive
Excellent water vapour resistance
Specification
Type test cer tificate available* to show conformance to BS476 Part 6 Class O
and Part 7 Categor y 1. Cer tification to the following standards may be available
on request. BS3887 :1991.
Technical Details
Typical values
Thickness 0.07mm
Breaking Load 12 N/cm
Elongation 5%
Adhesion
Steel 3.6 N/cm
After Water 3.6 N/cm
Immersion
RoHS compliant Yes
Ser vice Temperature -20°C to +110°C
Application Temperature 0°C to +40°C
Storage Temperature +12°C to +25°C
*Standard charge for certificate:£25.00.
AT502 30 Micron Aluminium Foil Tape
Issue 8 / May 2006
AFERA
Association des Fabricants Européens de
Rubans Auto-Adhésifs.
NOTE
Except where indicated otherwise,the figures stated are aver-
age values and should not be regarded as MAXIMUMor MINI-
MUM values for specification purposes.The Company reserves
the right to improve products and any change in specification
will result in a re-issue of the relevant ‘Technical Data Sheet’.
Customers should satisfy themselves that the tape is suitable
for their requirements whether after such modifications or
otherwise. Please check that you have the latest issue of the
‘Technical Data Sheet’.All slitting and length tolerances are to
British Standards.Before use the customer is advised to con-
sult the Health & Safety Data Sheet produced by the company
for this product,which is available on request.
STORAGE
Tapes stored below the minimum recommended temperature
will require warming up to that level before use.Up to 24
hours may be required for this to take place.
