40 | 9 | 8 7 6 5 4 3 2 1 -C- DIM B EN PART NO. LEGEND MATING POINT CKT#I CKT#3 OF CONTACT 87264- xx 5 x* 2.00 /- 1 fo | | no | CIRCUIT SIZE PLATING : 4.00 aes VU POST-PLATED iio { ice || | | t ZIT 2 - 0.38um/1Suin MIN. GOLD PLATE IN SELECTED AREA AND | 2.55 40.20 2.54um/100uin MIN. TIN IN SELECTED AREA OVER CKT#2 z. 1.27um/50uin NICKEL OVERALL (IN TUBE). } 3 - 0,76um/30uin MIN. GOLD PLATE IN SELECTED AREA AND 2.54um/100uin MIN. TIN IN SELECTED AREA OVER 0.60 TYP + | 2.00 ~Ir 0.15 TYP 1.27um/50uin NICKEL OVERALL (IN TUBE). | 4 - 0,05-0.25um/2-10uin GOLD PLATE IN SELECTED AREA AND DIM_A 2.54um/100uin MIN. TIN IN SELECTED AREA OVER SECTION Z-Z 1.27um/50uin NICKEL OVERALL (IN TUBE). DIM A|~ . 8 - 0.38um/1Suin MIN. GOLD PLATE IN SELECTED AREA AND 2.54um/100uin MIN. TIN IN SELECTED AREA OVER EDGE OF P.C.B 1.27um/50uin NICKEL OVERALL. (IN TAPE/REEL) 9.30 0.22 REF 9 - 0,76um/30uin MIN. GOLD PLATE IN SELECTED AREA AND _ | on 2.54um/100uin MIN. TIN IN SELECTED AREA OVER 7] f t [? oO 00 & f 1.27um/SOuin NICKEL OVERALL. (IN TAPE/REEL) L 1.20 5 - 0,05-0.25um/2-10uin GOLD PLATE IN SELECTED AREA AND 5.00 COMPONENT SIDE | MIN. 2.54um/100uin MIN. TIN IN SELECTED AREA OVER 1.27um/50uin NICKEL OVERALL (IN TAPE/REEL) BS Ss Ss OQ O- O 44 HOUSING OUTLINE @ 0.90+0,08 @ 0.20 RECOMMENDED P.C. BOARD LAYOUT NOTES: 1. 10 CIRCUIT SIZE SHOWN FOR ILLUSTRATION ONLY. SEE CHART FOR =SE) oui] GENERAL TOLERANCES SCE ESGIUNTS TH 5 ANGLE /\ SSS! |symBots| (UNLESS SPECIFIED) PROJECTION PLATING FINISH: TERMINAL - AS PER LEGEND =e Tan INCH | DRAWN BY SATE LE 3, RECOMMENDED PC BOARD THICKNESS IS 160 2010mm. wy 2] 2|\G/=00 [PLACES [E--- [= --- __JWAN 1992/02/25 MGRID, 2MM DUAL ROW HDR. 4. PRODUCT SPECIFICAION PS-87264 APPLIES. mS F 3 PLACES IE ==> |p aa> (CHECKED BY DATE SIDE ENTRY RECEPTACLE 5. PART IS MATEABLE TO ALL MILLI-GRID HEADERS WITH MATING PIN FF nowy | \&/=00 2 PLACES|+02 +--- LAI 1992/02/25 T/H LENGTH BETWEEN 2.50mm AND 4.20mm. We Zs=|s 1 PLACE }E--- |--~ |APPROVED BY DATE 6. TAPE & REEL OPTION IS SHOWN ON SHT 3 WITH 8 CKT ILLUSTRATION |W? ESS \G/=0 0 PLACE [= + WONG 1992/02/25 OBA +30 MATERIAL NO, DOCUMENT NO. SHEET NO. 7. PARTS SHALL BE PACKED IN MOISTURE BARRIER BAG. wZZoe ANGULAR SEE TABLE SD-87264-%%50 Or FIRST CIRCUIT TO BE IDENTIFIED BY A NOTCH ACROSS TOP OF HOUSING) I & = o- DRAFT ERE AIC ABLE STE] aS ORANRES CONTAINS REORTATER THATS PROPRETARY 10 MOLEX AND IS LOCATED BETWEEN CIRCUIT 1&3 AS SHOWN, WITHIN DIMENSIONS _|A\ SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION m IN RE b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 6 | 3 | 4 | 3 | 2 | ' 10 9 8 7 6 5 4 3 | 2 | 1 PART NUMBER|/PART NUMBER 0.38um GOLD |0.76um GOLD | CKT. DIM A|DIM B PLATING /\ PLATING /\ SIZE 87264-0652 87264-0653 6 4.00 6.20 87264-0852 87264-0853 8 6.00 8.20 87264-1052 87264-1053 lo 8.00 10.20 87264- [252 87264-1253 2 10.00 12.20 Ptr nq < 10.000.25 >4 87264-1452 87264-1453 14 | 12.00 | 14.20 es 87264-1652 87264-1653 16 14.00 16.20 Porotrotot re 4,25 | fe 1.60 Polo | 87264-1852 87264-1853 8 16.00 18.20 | | | I | porn 1.00 5.70 o 87264-2052 87264-2053 20 | 18.00 | 20.20 1 y 87264-2252 87264-2253 22 | 20.00 | 22.20 Po 5 I 87264-2452 87264-2453 | 24 | 22.00 | 24.20 py Et 5.50 | 87264-2652 87264-2653 | 26 | 24.00 | 26.20 ro rglh bof | 10.0020.25 87264-2852 87264-2853 28 | 26.00 | 28.20 tL 560+ 1.00 rT (-) 87264-3052 87264-3053 30 | 28.00 30.20 It 87264-3252 87264-3253 32 | 30.00 | 32.20 | | bor th yt 87264-3452 87264-3453 | 34 | 32.00 | 34.20 | | boi tht 3.00 be 0.5 THK 87264-3652 87264-3653 36 | 34.00 | 36.20 | | poy Tho tl ALL AROUND 87264-3852 87264-3853 38 | 36.00 | 38.20 pop thot od -e| 3.00 be poy tho tot 87264-4052 87264-4053 40 | 38.00 | 40.20 roy tt ot | | ov PART IN TUBE ORIENTATION. 87264-4252 87264-4253 42 | 40,00 | 42.20 boroilotot 87264-4452 87264-4453 44 | 42.00 | 44,20 a 87264-4652 87264-4653 46 | 44.00 | 46.20 87264-4852 87264-4853 48 | 46.00 | 48.20 87264-5052 87264-5053 50 | 48.00 | 50.20 = Ss s QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE S55] Isympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC |OC] PROJECTION = = = mm INCH DRAWN BY DATE TITLE m SS 5iZz\\Y/-0 [PLACESE---__|--- _|JWAN 1992/02/25 MGRID, 2MM DUAL ROW HDR. mc & 3 PLACES|--- _[+-- _|CRECKED BY DATE SIDE ENTRY RECEPTACLE Peay [B\Y-0 [ZPLAcESiz0.2 [-- MLAI 1992/02/25 T/H wezS=|4 1 PLACE [E---. [4--- APPROVED BY DATE EASES G0 fOPraccE t WONG 1992/02/25 molex Wy S SA ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo ea DRAFT WHERE APPLICABLE|_SEE TABLE SD-87264-*%50 2 OF 3 Mit OO tl _ SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E4 ag WITHIN DIMENSIONS (A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. G 2012/01/11 40 9 8 7 6 5 P | 3 | 2 PART NUMBER | PART NUMBER 0.38um GOLD | 0.f6um GOLD CKT PLATING PLATING <tc | DIM W| DIM F | DIM Bo (IN TAPE/REEL)| (IN TAPE/REEL) 87264-0858 87264-0859 8 24.00 11.50 8.80 87264-1658 - 6 24.00 11.50 16.80 2.00-4 12.00 +0.10 4.00 @150 0 (TYP) - 1.75 {0:50 THK (PILOT HOLE) | i F | 1 Bo j Ly W+0.30 NOTES: Tt Lk CUSTOMER PULL OUT DIRECTION uo m = 1. LEADER AND TRAILER TAPE 160 MIN. TOP TAPE TRAILER COMPONENT PULL OUT DIRECTION 230MIN. 390 MIN TOP TAPE 160 MIN. TAIL _ PART LEADER PART (EMPTY) (EMPTY) 2. PEELING OFF FORCE OF THE TOP TAPE: 20-80qf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) PEEL OFF DIRECTION 15 MAX. ee PULL OUT DIRECTION 3. PACKAGING STANDARD IS AS PER EIA-481. 4. TAPE & REEL QUANTITY = 600PCS/REEL = Ss S QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SS] lsympots| (UNLESS SPECIFIED) MM ONLY NTS METRIC [OC] PROJECTION = = = mm INCH DRAWN BY DATE TITLE Rm S25 lz/\G7-0 PLACES|E--- ]E--- _JJWAN 1992/02/25 MGRID, 2MM DUAL ROW HDR. Lis F 3 PLACES |#-- _[-+--~ __ [CHECKED BY DATE SIDE ENTRY RECEPTACLE eu |BINY/SO [ZPLAcesi#O2 [+--- MLA 1992/02/25 T/H gezs=|H 1 PLACE [t---|#--- APPROVED BY DATE BOGS = \/-0 [oPacele + WONG 1992/02/25 oO 3 s 3 ee ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. Q0eeeh DRAFT WHERE APPLICABLEL_SEE TABLE SD-87264-%%50 3 OF 3 <u oot MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 mM IN REV 6 | 5 | 4 | 3 | 2 |