PESD5V0S1BA,115 - NEXPERIA

PESD5V0S1BA

Bidirectional ESD protection diode

23 August 2018 Product data sheet

1. General description

Bidirectional ElectroStatic Discharge (ESD) protection diode in very small SOD323 (SC-76) SM

plastic package designed to protect one signal line from the damage caused by ESD and other

transients.

2. Features and benefits

•Bidirectional ESD protection of one line

•Max. peak pulse power: PPPM = 130 W

•Low clamping voltage: V(CL)R = 14 V

•Low leakage current: IRM = 5 nA

•ESD protection > 30 kV

•IEC 61000-4-2, level 4 (ESD)

•IEC 61000-4-5 (surge); IPPM = 12 A

•Very small SMD plastic package

•AEC-Q101 qualified

3. Applications

•Cellular handsets and accessories

•Portable electronics

•Computers and peripherals

•Communication systems

•Audio and video equipment

4. Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

VRWM reverse standoff

voltage

Tamb = 25 °C - - 5 V

Cddiode capacitance f = 1 MHz; VR = 0 V; Tamb = 25 °C - 35 45 pF

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

5. Pinning information

Table 2. Pinning information

Pin Symbol Description Simplified outline Graphic symbol

1 K1 cathode (diode 1)

2 K2 cathode (diode 2)

SOD323

sym045

K2K1

6. Ordering information

Table 3. Ordering information

PackageType number

Name Description Version

PESD5V0S1BA SOD323 plastic, surface-mounted package; 2 leads; 1.3 mm pitch; 1.7

mm x 1.25 mm x 0.95 mm body

SOD323

7. Marking

Table 4. Marking codes

Type number Marking code

PESD5V0S1BA E6

Product data sheet 23 August 2018 2 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Per diode

PPPM rated peak pulse power [1] [2] - 130 W

IPPM rated peak pulse current

tp = 8/20 µs

[1] [2] - 12 A

Tjjunction temperature - 150 °C

Tamb ambient temperature -55 150 °C

Tstg storage temperature -65 150 °C

ESD maximum ratings

IEC 61000-4-2 (contact discharge) [2] [3] - 30 kVVESD electrostatic discharge

voltage HBM MIL-Std 883 - 10 kV

[1] Non-repetitive current pulse 8/20 μs exponentially decaying waveform according to IEC 61000-4-5

[2] Measured from pin 1 to pin 2.

[3] Device stressed with ten non-repetitive ElectroStatic Discharge (ESD) pulses

0 10

e- t

20 t (µs)

Ipp

(%)

120

mle218

100 % Ipp; 8 µs

50 % Ipp; 20 µs

Fig. 1. 8/20 µs pulse waveform according to

IEC 61000-4-5

001aaa191

Ipp

100 %

90 %

30 ns

60 ns

10 %

tr = 0.7 to 1 ns

Fig. 2. ESD pulse waveform according to

IEC 61000-4-2

Product data sheet 23 August 2018 3 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

9. Characteristics

Table 6. Characteristics

Symbol Parameter Conditions Min Typ Max Unit

VRWM reverse standoff

voltage

Tamb = 25 °C - - 5 V

VBR breakdown voltage IR = 1 mA; Tamb = 25 °C 5.5 - 9.5 V

IRM reverse leakage current VRWM = 5 V; Tamb = 25 °C - 5 100 nA

Cddiode capacitance f = 1 MHz; VR = 0 V; Tamb = 25 °C - 35 45 pF

IPP = 1 A; Tamb = 25 °C [1] [2] - - 10 VVCL clamping voltage

IPPM = 12 A; Tamb = 25 °C [1] [2] - - 14 V

rdif differential resistance IR = 1 mA; Tamb = 25 °C - - 50 Ω

[1] Non-repetitive current pulse 8/20 µs exponentially decaying waveform according to IEC61000-4-5.

[2] Measures from pin 1 to pin 2.

001aaa202

tp (µs)

1 104

103

10 102

102

103

PPP

(W)

Tamb = 25 °C

Fig. 3. Peak pulse power as a function of exponential

pulse duration; typical values

Tj (°C)

0 20015050 100

001aaa193

0.4

0.8

1.2

PPP

PPP(25°C)

Fig. 4. Relative variation of peak pulse power as a

function of junction temperature; typical values

001aaa203

VR (V)

0 542 31

(pF)

f = 1 MHz; Tamb = 25 °C

Fig. 5. Diode capacitance as a function of reverse

voltage; typcial values

001aaa204

Tj (°C)

75 150125100

102

10- 1

IRM(Tj)

IRM(Tj=85°C)

Fig. 6. Relative variation of reverse leakage current

as a function of junction temperature; typical

values

Product data sheet 23 August 2018 4 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

006aaa056

50 Ω

PESD5V0S1Bx

vertical scale = 200 V/div

horizontal scale = 50 ns/div

unclamped +1 kV ESD voltage waveform

(IEC61000-4-2 network)

clamped +1 kV ESD voltage waveform

(IEC61000-4-2 network)

unclamped -1 kV ESD voltage waveform

(IEC61000-4-2 network)

clamped -1 kV ESD voltage waveform

(IEC61000-4-2 network)

vertical scale = 10 V/div

horizontal scale = 50 ns/div

vertical scale = 200 V/div

horizontal scale = 50 ns/div

vertical scale = 10 V/div

horizontal scale = 50 ns/div

GND

RG 223/U

50 Ω coax

ESD TESTER 4 GHz DIGITAL

OSCILLOSCOPE

40 dB

ATTENUATOR

IEC 61000-4-2 network

CZ = 150 pF; RZ = 330 Ω

Fig. 7. ESD clamping test setup and waveforms

Product data sheet 23 August 2018 5 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

10. Application information

The device is designed for the protection of one bidirectional data or signal line from the damage

caused by ESD and/or other surge pulses. The device may be used on lines where the signal

polarities are both, positive and negative with respect to ground. It provides a surge capability of

130 W per line for an 8/20 μs waveform.

aaa-002737

ESD protection diode

GND

line to be protected

Fig. 8. Bidirectional protection of one signal line

Circuit board layout and protection device placement

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge

transients. The following guidelines are recommended:

1. Place the device as close to the input terminal or connector as possible.

2. Minimize the path length between the device and the protected line.

3. Avoid running protected conductors in parallel with unprotected conductors.

4. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops.

5. Minimize the length of the transient return path to ground.

6. Avoid using shared transient return paths to a common ground point.

7. Use ground planes whenever possible. For multilayer PCBs, use ground vias.

11. Test information

Quality information

This product has been qualified in accordance with the Automotive Electronics Council (AEC)

standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in

automotive applications.

12. Package outline

03-12-17Dimensions in mm

0.25

0.10

0.45

0.15

2.7

2.3

1.8

1.6

0.40

0.25

1.1

0.8

1.35

1.15

Fig. 9. Package outline SOD323

Product data sheet 23 August 2018 6 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

13. Soldering

0.951.65

2.2

2.1

3.05

solder lands

solder resist

occupied area

solder paste

0.5

(2×)

0.6

(2×)

0.6 (2×)0.5 (2×)

sod323_fr

Dimensions in mm

Fig. 10. Reflow soldering footprint for SOD323

1.5 (2×)

2.9

1.2

(2×)

2.75

sod323_fw

solder lands

solder resist

occupied area

preferred transport

direction during soldering

Dimensions in mm

Fig. 11. Wave soldering footprint for SOD323

Product data sheet 23 August 2018 7 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

14. Revision history

Table 7. Revision history

Data sheet ID Release date Data sheet status Change notice Supersedes

PESD5V0S1BA v.1 20180823 Product data sheet - PESD5V0S1BA

_BB_BL_4

Modifications: •Features and benefit AEC-Q101 qualified added.

•AEC-Q101 quality information added.

•Limiting values; Tamb updated to -55°C.

•Application information: updated.

•Soldering section added.

•The format of this data sheet had been redesigned to comply with the identity guidelines of

Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

PESD5V0S1BA

_BB_BL_4

20090820 Product data sheet - PESD5V0S1BA

_BB_BL_3

PESD5V0S1BA

_BB_BL_3

20041217 Product data sheet - PESD5V0S1BA

_BB_BL_2

PESD5V0S1BA

_BB_BL_2

20040322 Product specification - PESD5V0S1BA

_BB_BL_1

PESD5V0S1BA

_BB_BL_1

20040304 Product specification - -

Product data sheet 23 August 2018 8 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

15. Legal information

Data sheet status

Document status

[1][2]

Product

status [3]

Definition

Objective [short]

data sheet

Development This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification This document contains data from

the preliminary specification.

Product [short]

data sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Product data sheet 23 August 2018 9 / 10

Nexperia PESD5V0S1BA

Bidirectional ESD protection diode

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Applications.................................................................. 1

4. Quick reference data....................................................1

5. Pinning information......................................................2

6. Ordering information....................................................2

7. Marking.......................................................................... 2

8. Limiting values............................................................. 3

9. Characteristics.............................................................. 4

10. Application information............................................. 6

11. Test information.......................................................... 6

12. Package outline.......................................................... 6

13. Soldering..................................................................... 7

14. Revision history..........................................................8

15. Legal information........................................................9

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 23 August 2018

Product data sheet 23 August 2018 10 / 10