COPAL ELECTRONICS 16, 22 TURNS WIREWOUND SLIDE SWITCHES (1 mmTRIMMERS PITCH) -8/ CVS-11 INTERNAL STRUCTURE STRUCTURE INTERNAL -8 RoHScompliant compliant RoHS 8 7 1 2 3 name PartPart name 4 5 6 Material Material FEATURES 1 Screw shaft Cover RoHS compliant &EMJ;CF;H7JKH;9E;<<?9?;DJE<H;I?IJ7D9; &EM9EDJ79JH;I?IJ7D9; Lowest profile design of 1.45 mm Fine pitch of 1 mm Easy motion with knob height of 0.2 mm 2 "O" ring Slider 3 Resistive element Housing 4 Base contact Slider 5 Wipercontact Fixed 6 Terminal pin 7 Housing Earth terminal Flammability Flammability -- Brass, Stainless steel,Nickel-plated Gold-plated -- Polyphenylenesulphide UL-94HB UL-94V-0 -- Stainless steel,DAP Gold-plated UL-94HB Silicone rubber Polyamide Copper, Palladium-plated Copper alloy, Gold-plated Nickel, Gold-plated -- Stainless steel,DAP Gold-plated UL-94HB CFCs, Halon,block Carbon tetrachloride and designated bromic flame Polyoxymethylene 8 Slider retardant PBBOs and PBBs are not used in our products. PART PART NUMBER NUMBER DESIGNATION DESIGNATION - 1 1 P B 2 0 1 C V S - 0 4 T B - 1 ( 1 2 1 1 ) Series name Taping 1500 pcs./reel value BlankResistance 2000 pcs./reel Series name 19.0 4.2 6.7 mm -11 31.8 7.0 8.2 mm No.-8 of bits (1208) (1211) 01 1 bit 04 4 bits 02 2 bits 08 8 bits may be replaced by 12 for type writing conveniences. 03 3 bits Product shape (Shape of terminal) Shape of terminal P Through hole pins BGull wing PB Panel mount (Through holehole pins) CThrough L Flexible lead Form ofLBpackaging Panel mount (Flexible lead) T Taping (Reel) BlankBulk in plastic bag (01C : Plastic bag only) LIST OF PART NUMBERS <Nominal resistance values> Fig.1 -8 (1208) -11 (1211) Series name P P L PB LB P L PB LB A A A 10 -8 -8P A A 20 C C (1208) (1208P) B (Gull Pieces in package No. of bits Form of packaging Shape of terminals B (Gull wing) No. of bits Form of50 packaging Pieces in Apackage wing) A Shape of terminals (Through hole) (Through hole) A A 100 -11 -11P -11PB -11LB A -11L Taping Taping 500 pcs./reel (1211LB) CVS-04TB-1 A 500 pcs./reel A 200 (1211) (1211P) CVS-01TB-1 (1211PB) (1211L) A 2000 pcs./reel A 500 1 4 Taping Taping 2000 pcs./reel CVS-01TB CVS-04TB Not manufactured A A 1 k Plastic bag Plastic bag 100 pcs./pack 100 pcs./pack CVS-01B CVS-01C CVS-04B A A 2 k Verify the above part numbers <Nominal resistance values> (Fig. 1) when placing orders. Taping Taping 500 pcs./reel CVS-02TB-1 CVS-08TB-1 A 500 pcs./reel A 5 k A 2000 pcs./reel A 10 k 2 8 Taping Taping 2000 pcs./reel CVS-02TB CVS-08TB A A 20 k Plastic bag Plastic bag 100 pcs./pack 100 pcs./pack CVS-02B CVS-08B A A A A A 25 k Taping 500 pcs./reel CVS-03TB-1 A A 50 k A A 100 k 3 Taping 2000 pcs./reel CVS-03TB Product shape LIST OF PART NUMBERS Plastic bag CVS-03B 100 pcs./pack A 313 The products indicated by A mark are manufactured upon receipt of order basis. Specifications are subject to change without notice. Specifica tions in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, Apr, 2008 COPAL ELECTRONICS -8/-11 WIREWOUND TRIMMERS SLIDE SWITCHES (1 mm PITCH) ELECTRICAL CHARACTERISTICS RoHS compliant CVS INTERNAL MECHANICAL CHARACTERISTICS STRUCTURE -8 (1208) -11 (1211) 10 ~ 50 k 10 ~ 100 k Mechanical turn Resistance tolerance 10 % 5% Operating torque 56.88 mN*m 7.85 mN*m {80 gf*cm} maximum {580 gf*cm} maximum Power ratings 1 0.5 W (70 C) 0 W (120 C) 0.75 W (70 C) 0 W (120 C) Mecahanical stop Clutch action Electrical continuity Continuous for full mechanical range Nominal resistance range -8 (1208) -11 (1211) 16 turns 22 turns 200 cycles [ R/R 2 %] Rotational life 2 % or 1 , whichever is greater End resistance 0.5 % Absolute minimum resistance FEATURES 0.25 % Or 1 , whichever is greater RoHS compliant 1.66 ~mm 0.19 % 1.43 ~ 0.12 % Resolution Lowest profile design of 1.45 Fine pitch of 1 mm (ENR) Peak noise Easy motion with knob height100 of 0.2 mm maximum Cover Slider 8.89 N {907 gf} minimum Tensile strength MIL-R-27208 Material Flammability { }Reference only -- Stainless steel, Gold-plated Polyamide UL-94V-0 CHARACTERISTICS ENVIRONMENTAL Housing Polyphenylenesulphide itemcontact TestSlider 55 ~ 120 C Operating temp. range Terminal strength Part name Test conditions Specifications Stainless steel, Gold-plated [R/R 1 % 0.05 ] Fixed contact Thermal shock -6 50 10 /C maximum Temp. coefficient 1000 M minimum (DC500 V) Insulation resistance 900 Vrms, 1 min (Room conditions) Dielectric strength Approx. 3.19 g (-11P) Approx. 3.49 g (-11L) NUMBERApprox. DESIGNATION 1.08 g NetPART weight Approx. 9.13 g (-11PB) Approx. 9.31 g (-11LB) 65 ~ 125 C [S.S. 1 % Resolution] -- Copper alloy, Gold-plated 80 ~ 98 %, Terminal pin [ R/R 1 % 0.05 ] Humidity 240 h Earth terminal Stainless steel, Gold-plated 981 m/s2 Shock [R/R 1 % 0.05 ] CFCs, Halon, Carbon tetrachloride and designated flame [S.S. 1 %bromic Resolution] Acceleration retardant not used in our products. VibrationPBBOs and PBBs are 2 196 m/s ,10 ~ 2000 Hz Load life C V S - 0 4 LowTtemp.Boperation - 1 1 Rated power is given for the maximum input voltage (V) and maximum wiper current (mA) for the resistance value. Series name 70 C (Full load), 1000 h 55 C, 2 h High temp. exposure 120 C, 250 h Immersion seal 85 C Shape of terminal 04 4 bits 08 8 bits RESOLUTION CHARACTERISTICS Nominal resistance values () 10 20 50 100 200 500 -8 (1208) Resolution (%) -11 (1211) 1.66 1.35 1.18 0.90 0.73 0.52 LIST OF PART NUMBERS C 1 ofk packaging Shape of terminals B (Gull 0.62 wing) No. of bits Form (Through hole) 2k 0.47 5k 0.39 Taping CVS-01TB-1 10 k 0.28 1 Taping 20 k 25 k Taping 50 k 100 k Taping Plastic bag 2 Plastic bag Taping 3 Taping Plastic bag [R/R 1 % 0.05 ] [S.S. 1 % Resolution] Taping 1500 pcs./reel Blank2000 Nopcs./reel leaks No. of bits 01 1 bit 02 2 bits 03 3 bits [S.S. 2 % Resolution] CVS-01TB 0.22 CVS-01B CVS-01C 0.21 CVS-02TB-1 0.19 -- CVS-02TB CVS-02B CVS-03TB-1 CVS-03TB CVS-03B Salt spray Soldering heat 100 pcs./pack -- BGull wing CThrough hole 350 3s Form of C, packaging -- T Taping (Reel) BlankBulk in plastic bag (01C : Plastic only) R/RChange inbag total resistance 1.43 1.13 0.91 0.76 0.57 0.49 0.51 Pieces in package 0.39 0.28 500 pcs./reel 0.25 2000 pcs./reel 0.18 100 pcs./pack 0.16 500 pcs./reel 0.13 0.12 2000 pcs./reel No corrosion S.S. Setting stability No. of bits Form of packaging Shape of terminals B (Gull wing) Taping 4 Taping Plastic bag Taping 8 Taping Plastic bag C (Through hole) CVS-04TB-1 CVS-04TB CVS-04B CVS-08TB-1 CVS-08TB CVS-08B Pieces in package 500 pcs./reel 2000 pcs./reel 100 pcs./pack 500 pcs./reel 2000 pcs./reel 100 pcs./pack 500 pcs./reel 2000 pcs./reel 100 pcs./pack Specifications are subject to change without notice. Specifica tions in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, Apr, 2008 COPAL ELECTRONICS CVS SLIDE SWITCHES (1 mm PITCH) WIREWOUND TRIMMERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance : 0.2 (Unit : mm) RoHS compliant INTERNAL STRUCTURE Except for adhesive thickness -8P (1208P) Through hole pins 1.2 19 4.2 6.7 0.75 5.1 2.6 0.7 2.54 12.7 2.7 3 - 0.2 t Gold - plated 4.0 0.8 -11P (1211P) Through hole pins Part name FEATURES 31.8 25.40.1 1.6 3.2 0.6 W 0.8 D 6 6.9 7 12.70.6 8.2 3.2 compliant 2 - 2.4 Lowest profile design of 1.45 mm Fine pitch of 1 mm Easy motion with knob height of 0.2 mm 7.6 17.8 Cover Material Flammability Stainless steel, Gold-plated -- Slider Polyamide UL-94V-0 2.8 1.3 Housing Slider contact Fixed contact Terminal pin Polyphenylenesulphide Stainless steel, Gold-plated 2.5 3 - 0.70.03 Gold - plated -11L (1211L) Flexible lead 31.8 25.40.1 8.2 0.8 PART NUMBER DESIGNATION 6 3.2 7 Stainless steel, Gold-plated CFCs, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. 2.8 2 - 2.4 -- Copper alloy, Gold-plated Earth terminal 1.6 0.6 W 0.8 D 3.2 3 - 0.6 150 Lead wire CW rotation 0.5 5.1 1.8 0.5 W 1 D RoHS -8/-11 Lead wire Y , R ,G C V S - 0 4 T B - 1 -11PB (1211PB) Panel mount (Through hole pins) Taping Series name 1500 pcs./reel Setting to panelBlank2000 pcs./reel (42.6) 0.6 7.6 10.5 17.8 3 - 0.7 Gold - plated M 5 (P = 0.8) (ISO) 10.5 max. 0.8 Shape of terminal BGull wing CThrough hole 8.8 6.5 9.8 6 35.3 04 4 bits 08 8 bits 12.70.6 No. of bits 01 1 bit 02 2 bits 03 3 bits Form of packaging Washer, t = 0.8 T Taping (Reel) -11PB, LB mounting Nut, t = 3.2 BlankBulk in plastic bag (01C : Plastic bag only) 2.8 2.5 dimensions (suggested) Taping 2 Taping Plastic bag Taping 3 Taping Plastic bag No. of bits Form of packaging Shape of terminals B (Gull wing) 500 pcs./reel CVS-01TB-1 (42.6) 2.84 2000 pcs./reel CVS-01TB 35.3 6.5 0.8 100 pcs./pack CVS-01B CVS-01C 500 pcs./reel CVS-02TB-1 8 2000 pcs./reel CVS-02TB M 5 (P = 0.8) (ISO) 100 pcs./pack Non - turn pin CVS-02B 500 pcs./reel CVS-03TB-1 2000 pcs./reel CVS-03TB 100 pcs./pack CVS-03B 10.5 max. Plastic bag Pieces in package 9.8 6 Taping 0.6 Taping 1 C (Through hole) Taping C 5 +0.2 0 Pieces in package (Through hole) CVS-04TB-1 Setting to panel CVS-04TB CVS-04B CVS-08TB-1 CVS-08TB Washer, t =CVS-08B 0.8 500 pcs./reel 3 - 0.6 150 TapingLead wire Plastic bag 8.8 Panel mount (Flexible lead) No. of bits Form of packaging Shape of terminals B (Gull wing) 5.3 0.1 LIST OF PART NUMBERS -11LB (1211LB) Taping Taping Plastic bag 1.2 2000 pcs./reel +0.2 0 100 pcs./pack 500 pcs./reel 2000 pcs./reel 100 pcs./pack Nut, t = 3.2 Lead wire Y , R ,G Specifications are subject to change without notice. Specifica tions in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, Apr, 2008