Approval sheet
High Capacitance Capacitors
Page 1 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS
High Capacitance Series
0402 to 1812 Sizes
X7R, X5R & Y5V Dielectrics
RoHS Compliance
Approval sheet
High Capacitance Capacitors
Page 2 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
1. DESCRIPTION
MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization,
high density and high efficiency, ceramic condensers are used.
WTC high capacitance MLCC offers low ESR and excellent frequency characteristics to be suited for coupling and
decoupling applications in circuit. The high dielectric constant material X7R, X5R and Y5V are used for this series product.
4. HOW TO ORDER
1206 F 106 Z 100 C T
Size
Inch (mm)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1812 (4532)
Dielectric
B=X7R
X=X5R
F=Y5V
Capacitance
Two significant digits
followed by no. of zeros.
And R is in place of
decimal point.
eg.:
106=10x10
6
=10µF
Tolerance
K=±10%
M=±20%
Z=-20/+80%
Rated voltage
Two significant digits
followed by no. of
zeros. And R is in
place of decimal
point.
6R3=6.3 VDC
100=10 VDC
160=16 VDC
250=25 VDC
500=50 VDC
101=100 VDC
Termination
C=Cu/Ni/Sn
Packaging
T=7” reeled
G=13” reeled
2. FEATURES
a. Small size with high capacitance.
b. Capacitor with lead-free termination (pure Tin).
3. APPLICATIONS
a. Digital circuit coupling or decoupling applications.
b. For high frequency and high-density type power
suppliers.
c. For bypassing.
Approval sheet
High Capacitance Capacitors
Page 3 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
5. EXTERNAL DIMENSIONS
T
W
L
M
B
M
B
Fig. 1 The outline of MLCC
Size
Inch (mm)
L (mm) W (mm) T (mm)/Symbol
Remark
M
B
(mm)
1.00±0.05 0.50±0.05 0.50±0.05 N
0402 (1005)
1.00±0.20 0.50±0.20 0.50±0.20 E
# 0.25
+0.05/-0.10
1.60±0.10 0.80±0.10 0.80±0.07 S
0603 (1608)
1.60+0.15/-0.10
0.80+0.15/-0.10
0.80+0.15/-0.10
X
0.40±0.15
0.80±0.10 B
2.00±0.15 1.25±0.10 1.25±0.10 D
#
0805 (2012)
2.00±0.20 1.25±0.20 1.25±0.20 I
# 0.50±0.20
0.95±0.10 C
#
3.20±0.15 1.60±0.15 1.25±0.10 D
#
1.60±0.20 G
#
3.20±0.20 1.60±0.20 1.15±0.15 J
#
1206 (3216)
3.20+0.30/-0.10
1.60+0.30/-0.10
1.60+0.30/-0.10
P
#
0.60±0.20
0.95±0.10 C
#
3.20±0.30 2.50±0.20 1.25±0.10 D
#
1.60±0.20 G
#
2.00±0.20 K
#
1210 (3225)
3.20±0.40 2.50±0.30 2.50±0.30 M
#
0.75±0.25
1.25±0.10 D
#
4.50±0.40 3.20±0.30 2.00±0.20 K
#
2.50±0.30 M
#
1812 (4532)
4.50±0.40 3.20±0.40 2.80±0.30 U
#
0.75±0.25
# Reflow soldering only is recommended.
Approval sheet
High Capacitance Capacitors
Page 4 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
6. GENERAL ELECTRICAL DATA
Dielectric X7R X5R Y5V
Size 0402, 0603, 0805, 1206, 1210, 1812
Capacitance range* 0.56µF to 47µF 0.027µF to 100µF 1µF to 100µF
Capacitance tolerance** K (±10%), M (±20%) Z (-20/+80%)
Rated voltage (WVDC) 6.3V, 10V, 16V, 25V, 50V, 100V
Tan δ* Note 1
Insulation resistance at Ur RxC≥500ΩxF
Operating temperature -55 to +125°C -55 to +85°C -25 to +85°C
Capacitance characteristic ±15% +30/-80%
Termination Ni/Sn (lead-free termination)
* Measured at 1.0±0.2Vrms, 1.0kHz±10% for C≤10µF; 0.5±0.2Vrms, 120Hz±20% for C>10µF, 30~70% related humidity, 25°C ambient
temperature for X7R, X5R and at 20°C for Y5V.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for 24±2 hours
before measurement.
Note 1:
X7R/X5R
Rated
vol. D.F.≦ Exception of D.F. ≦
3%≦
0201(50V); 0603 0.047µF; 0805 0.18µF;1206 0.47µF≧ ≧ ≧
5%≦
1210 4.7µF≧
50V≧
2.5%≦
10%≦
0603 1µF; 0805 1≧ ≧ µF;1206 4.7µF; 1210 10µF≧ ≧
35V 3.5%≦
10%≦
0805≥2.2µF; 1210 10µF≧
5%≦
0201 0.01µF;0805 1µF; 1210 10µF≧ ≧ ≧
7%≦
0603 0.33µF; 1206 4.7µF≧ ≧
25V 3.5%≦
10%≦
0402 0.10µF;0603 0.47µF; 0805 2.2µF;≧ ≧ ≧
1206 6.8µF ; 1210≧ ≧22µF
5%≦
0201 0.01µF;0402 0.033µF; ≧ ≧ ≧
0805 0.68µF;1206 2.2µF;1210 4.7µF≧ ≧ ≧
16V 3.5%≦
10%≦
0402 0.47uF; 0603 0.68µF;0805 2.2µF;≧ ≧ ≧
1206 4.7µF;≧ 1210 22µF≧
10%≦
0402 0.33µF;0603 0.33µF; 0805 2.2µF;≧ ≧ ≧
1206 2.2µF;1210 22µF≧ ≧
10V 5%≦ 15%≦
0201 0.1µF; 0402 1µF≧ ≧
15%≦
0201 0.1µF;0402 1µF;0603 10µF;≧ ≧ ≧ 0805 4.7µF; ≧
1206 47µF :1210 100µF≧ ≧
6.3V 10%≦
20%≦
0402 2.2≧µF
4V 15%≦
--- ---
Y5V
Rated vol.
D.F.≦
Exception of D.F.≦
50V≧ 5% 7% 0603≧0.1µF; 0805≧0.47µF;
1206≧4.7µF
35V 7% --- ---
7% 0402≧0.047µF;0603≧0.1µF;
0805≧0.33µF;1206≧1µF;
1210≧4.7µF
25V 5%
9% 0402≧0.068µF;0603≧0.47µF;
1206≧4.7µF; 1210≧22µF
9% 0402≧0.068µF; 0603≧0.68µF
16V
(C<1.0µF)
7% 12.5%
0402≧0.22µF
16V
(C 1.0≧µF)
9% 12.5%
0603≧2.2µF; 0805≧3.3µF;
1206≧10µF; 1210≧22µF;
1812≧47µF
10V 12.5%
20% 0402≧0.47µF
6.3V 20% --- ---
Approval sheet
High Capacitance Capacitors
Page 5 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
7. CAPACITANCE RANGE
7-1 X7R Dielectric
DIELECTRIC X7R
SIZE 0603 0805 1206
Rated Voltage (VDC)
6.3 10 16 25 6.3
10 16 25 50 6.3
10
16
25
50
100
0.56µF (564)
X X X
0.68µF (684)
X X X
0.82µF (824)
X X X
1.0µF (105)
X X X X D D D I J J J P P
1.5µF (155)
I I I J J J P
2.2µF (225)
X I I I I J J J P
3.3µF (335)
P P P P
4.7µF (475)
I I I P P P P P
6.8µF (685)
10µF (106)
I I P P P P
22µF (226)
P
Capacitance
47µF (476)
The letter in cell is expressed the symbol of product thickness.
DIELECTRIC X7R
SIZE 1210 1812
Rated Voltage (VDC)
10 16 25 50 100 10 16 25 50 100
0.56µF (564)
0.68µF (684)
0.82µF (824)
1.0µF (105)
D D D D K D D D K K
1.5µF (155)
M K
2.2µF (225)
K G M M M
3.3µF (335)
G
4.7µF (475)
K K K M
6.8µF (685)
10µF (106)
K K K M
22µF (226)
M M
Capacitance
47µF (476)
M
The letter in cell is expressed the symbol of product thickness.
Approval sheet
High Capacitance Capacitors
Page 6 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
7-2 X5R Dielectric
Dielectric X5R
Size 0402 0603 0805 1206 1210
Rated Voltage (VDC)
6.3
10
16
25
6.3
10
16
25
50
6.3
10
16
25
50
6.3
10
16
25
50
6.3
10
16
25
50
0.027µF (273)
N
0.033µF (333)
N
0.039µF (393)
N
0.047µF (473)
N
0.056µF (563)
N
N
0.068µF (683)
N
N
0.082µF (823)
N
N
N
0.10µF (104)
N
N
N
N
0.15µF (154)
0.22µF (224)
N
N
N
X
X
0.27uF (274)
X
X
0.33µF (334)
N
N
X
X
X
X
0.39µF (394)
X
X
0.47µF (474)
N
N
X
X
X
0.68µF (684)
N
N
X
X
X
0.82uF (824)
X
X
X
1.0µF (105)
N
N
N
X
X
X
X
X
D
D
D
I
1.5µF (155)
X
I
I
I
I
J
J
K
K
2.2µF (225)
N
N
X
X
X
X
I
I
I
I
J
J
P
K
K
3.3µF (335)
I
I
I
I
P
P
P
4.7µF (475)
E
X
X
X
I
I
I
I
P
P
P
P
P
K
K
K
6.8uF (685)
P
P
10µF (106)
E
X
I
I
I
I
P
P
P
P
K
K
K
K
M
22µF (226)
X
I
P
P
P
M
M
M
M
47µF (476)
I
P
P
M
M
M
Capacitance
100µF (107)
P
M
The letter in cell is expressed the symbol of product thickness.
7-3 Y5V Dielectric
DIELECTRIC Y5V
SIZE 0402 0603 0805
RATED VOLTAGE (VDC)
6.3 10 6.3 10 16 25 6.3 10 16 25 50
1.0µF (105)
N N S X X B B D D
1.5µF (155)
S D D
2.2µF (225)
S S X D D I
3.3µF (335)
D D
4.7µF (475)
X X D D I
6.8µF (685)
I
10µF (106)
I I I
Capacitance
22µF (226)
I
DIELECTRIC Y5V
SIZE 1206 1210 1812
RATED VOLTAGE (VDC)
6.3
10
16
25
35
50
6.3
10
16
25
35
50
10 16 25 50 100
1.0µF (105)
C C C C C C C C D D D D D
1.5µF (155)
C C C C C C D D D D
2.2µF (225)
C C C J C C C G D D D D
3.3µF (335)
J J J C C C D D D D
4.7µF (475)
J J J J P C C D G D D D D
6.8µF (685)
J J C C D D D D D
10µF (106)
J J P D D G K D D D K
22µF (226)
P K K
47µF (476)
P K K M
Capacitance
100µF (107)
M
The letter in cell is expressed the symbol of product thickness.
Approval sheet
High Capacitance Capacitors
Page 7 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
8. PACKAGING STYLE AND QUANTITY
Paper tape Plastic tape
Size Thickness (mm)/Symbol 7” reel 13” reel 7” reel 13” reel
0.50±0.05 N 10k 50k - -
0402 (1005)
0.50±0.20 E 10k - - -
0.80±0.07 S 4k 15k - -
0603 (1608)
0.80+0.15/-0.10 X 4k 15k - -
0.80±0.10 B 4k 15k - -
1.25±0.10 D - - 3k 10k
0805 (2012)
1.25±0.20 I - - 3k 10k
0.95±0.10 C - - 3k 10k
1.15±0.15 J - - 3k 10K
1.25±0.10 D - - 3k 10k
1.60±0.20 G - - 2k 10k
1206 (3216)
1.60+0.30/-0.10 P - - 2k 9k
0.95±0.10 C - - 3k 10k
1.25±0.10 D - - 3k 10k
1.60±0.20 G - - 2k -
2.00±0.20 K - - 1k 6k
1210 (3225)
2.50±0.30 M - - 1k 6k
1.25±0.10 D - - 1k 5k
2.00±0.20 K - - 1k -
2.50±0.30 M - - 0.5k 3k
1812 (4532)
2.80±0.30 U - - 0.5k -
Unit: pieces
Approval sheet
High Capacitance Capacitors
Page 8 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
9. ELECTRICAL CHARACTERISTICS
◙ Typical Impedance/ESR vs. Frequency
1206X106_10V
0.001
0.01
0.1
1
10
100
1000
1 10 100 1,000 10,000
Frequency (kHz)
Ohm
I Z I
ESR
Fig. 2 ESR and IZI vs. frequency (1206X106_10V)
0805F106_10V
0.001
0.01
0.1
1
10
100
1000
1 10 100 1,000 10,000
Frequency (kHz)
Ohm
I Z I
ESR
Fig. 3 ESR and IZI vs. frequency (0805F106_10V)
0603X105_10V
0.001
0.01
0.1
1
10
100
1000
10000
1 10 100 1,000 10,000
Frequency (kHz)
Ohm
I Z I
ESR
Fig. 5 ESR and IZI vs. frequency (0603X105_10V)
0805F475_10V
0.01
0.1
1
10
100
1000
1 10 100 1,000 10,000 100,000
Frequency (kHz)
Ohm
I Z I
ESR
Fig. 4 ESR and IZI vs. frequency (0805F475_10V)
Approval sheet
High Capacitance Capacitors
Page 9 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
10. RELIABILITY TEST CONDITIONS AND REQUIREMENTS
No.
Item Test Condition Requirements
1.
Visual and
Mechanical
--- * No remarkable defect.
* Dimensions to conform to individual specification sheet.
2.
Capacitance * Shall not exceed the limits given in the detailed spec.
3.
Q/ D.F.
(Dissipation
Factor)
Class I: NP0
Cap≤1000pF 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF 1.0±0.2Vrms, 1KHz±10%
Class II: X7R,X7E, X5R,Y5V
Cap≤10µF, 1.0±0.2Vrms, 1kHz±10%
**
Cap>10µF, 0.5±0.2Vrms, 120Hz±20%
** Test condition: 0.5±0.2Vrms，1KHz±10%
X7R: 0603≧225(10V),
0805=106(6.3V&10V)
X5R: 01R5≧103, 0201≧224 (6.3V),
0402≧475 (6.3V), 0402≧225(10V),
0603=106 (6.3V), 0603≧475(10V)
NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C
X7R, X5R:
Rated
vol. D.F.≦ Exception of D.F. ≦
3%≦
0201(50V); 0603 0.047µF; 0805 0.18µF;1206 0.47µF≧ ≧ ≧
5%≦
1210 4.7µF≧
50V≧
2.5%≦
10%≦
0603 1µ≧F; 0805 1µF;1206 4.7µF; 1210 10µF≧ ≧ ≧
35V 3.5%≦
10%≦
0805≥2.2µF; 1210 10µF≧
5%≦
0201 0.01µF;0805 1µF; 1210 10µF≧ ≧ ≧
7%≦
0603 0.33µF; 1206 4.7µF≧ ≧
25V 3.5%≦
10%≦
0402 0.10µF;0603 0.47µF; 0805 2.2µF;≧ ≧ ≧
1206 6.8µF ; 1210≧ ≧22µF
5%≦
0201 0.01µF;0402 0.033µ≧ ≧
F; ≧
0805 0.68µF;1206 2.2µF;1210 4.7µF≧ ≧ ≧
16V 3.5%≦
10%≦
0402 0.47uF; 0603 0.68µF;0805 2.2µF;≧ ≧ ≧
1206 4.7µF;≧ 1210 22µF≧
10%≦
0402 0.33µF;0603 0.33µF; 0805 2.2µF;≧ ≧ ≧
1206 2.2µF;1210 22µF≧ ≧
10V 5%≦ 15%≦
0201 0.1µF; 0402 1µF≧ ≧
15%≦
0201 0.1µF;0402 1µF;0≧ ≧ 603 10µF; 0805 4.7µF; ≧ ≧
1206 47µF :1210 100µF≧ ≧
6.3V 10%≦
20%≦
0402 2.2≧µF
4V 15%≦
--- ---
Y5V:
Rated vol.
D.F.≦
Exception of D.F.≦
50V≧ 5% 7% 0603 0.1≧µF; 0805 0.47≧µF;
1206 4.7≧µF
35V 7% --- ---
7% 0402 0.047≧µF;0603 0.1≧µF;
0805 0.33≧µF;1206 1≧µF;
1210 4.7≧µF 25V 5%
9% 0402 0.068≧µF;0603 0.47≧µF;
1206 4.7≧µF; 1210 22≧µF
9% 0402 0.068≧µF; 0603 0.68≧µF
16V
(C<1.0µF)
7% 12.5%
0402 0.22≧µF
16V
(C 1.0≧µF)
9% 12.5%
0603 2.2≧µF; 0805 3.3≧µF;
1206 10≧µF; 1210 22≧µF;
1812 47≧µF
10V 12.5%
20% 0402 0.47≧µF
6.3V 20% --- ---
4.
Dielectric
Strength
* To apply voltage (≤100V) 250%.
* Duration: 1 to 5 sec.
* Charge and discharge current less than
50mA.
* No evidence of damage or flash over during test.
5.
Insulation
Resistance
To apply rated voltage for max. 120 sec. 10GΩ or RxC 500Ω≧-F whichever is smaller.
Class II (X7R, X5R, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
50V:0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0805≥2.2µF;1210 10µF≧
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
16V:0402≥0.22µF;0603≥1µF;0805≥2.2µF;1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V
10GΩ or
RxC 100 Ω≧-
F
whichever is
smaller.
6.
Temperature
Coefficient
With no electrical load.
T.C. Operating Temp
NPO -55~125°C at 25°C
X7R -55~125°C at 25°C
X5R -55~ 85°C at 25°C
Y5V -25~ 85°C at 20°C
T.C. Capacitance Change
NPO Within ±30ppm/°C
X7R Within ±15%
X5R Within ±15%
Y5V Within +30%/-80%
Approval sheet
High Capacitance Capacitors
Page 10 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
No.
Item Test Condition Requirements
7.
Adhesive Strength
of Termination
* Pressurizing force：
5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
* No remarkable damage or removal of the terminations.
8.
Vibration Resistance
* Vibration frequency: 10~55 Hz/min.
* Total amplitude: 1.5mm
* Test time: 6 hrs. (Two hrs each in three mutually
perpendicular directions.)
* No remarkable damage.
* Cap change and Q/D.F.: To meet initial spec.
9.
Solderability * Solder temperature: 235±5°C
* Dipping time: 2±0.5 sec.
95% min. coverage of all metalized area.
10.
Bending Test * The middle part of substrate shall be pressurized by
means of the pressurizing rod at a rate of about 1 mm per
second until the deflection becomes 1 mm and then the
pressure shall be maintained for 5±1 sec.
* Measurement to be made after keeping at room temp.
for 24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change：
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R: within ±12.5%
Y5V: within ±30%
(This capacitance change means the change of capacitance under
specified flexure of substrate from the capacitance measured before
the test.)
11.
Resistance to
Soldering Heat
* Solder temperature: 260±5°C
* Dipping time: 10±1 sec
* Preheating: 120 to 150°C for 1 minute before imme rse
the capacitor in a eutectic solder.
* Before initial measurement (Class II only): Perform
150+0/-10°C for 1 hr and then set for 48±4 hrs at room
temp.
* Measurement to be made after keeping at room temp.
for 24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change:
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
* 25% max. leaching on each edge.
12.
Temperature Cycle * Conduct the five cycles according to the temperatures
and time.
Step
Temp. (°C) Time (min.)
1 Min. operating temp. +0/-3
30±3
2 Room temp. 2~3
3 Max. operating temp. +3/-0 30±3
4 Room temp. 2~3
* Before initial measurement (Class II only): Perform
150+0/-10°C for 1 hr and then set for 48±4 hrs at room
temp.
* Measurement to be made after keeping at room temp.
for 24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change
：
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
Approval sheet
High Capacitance Capacitors
Page 11 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
No.
Item Test Condition Requirements
13.
Humidity (Damp
Heat) Steady State * Test temp.: 40±2°C
* Humidity: 90~95% RH
* Test time: 500+24/-0hrs.
* Measurement to be made after
keeping at room temp. for 24±2 hrs.
(Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X7E, X5R: ≥10V**,within ±12.5%;6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V:0603 4.7≧µF;0402≧1µF;0201 0.1≧µF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
* Q/D.F. value:
NP0: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C
Less than 10pF Q≥200+10C
X7R, X5R:
Rated
vol. D.F.≦
Exception of D.F. ≦
6%≦
0201(50V);0603 0.047µF; 0805 0.18µF; 1206 0.47µF≧ ≧ ≧
10%≦
1210 4.7µF≧
50V≧
3%≦
20%≦
0603 1µF; 0805 1µF;1206 4.7µF; 1210 10µF≧ ≧ ≧ ≧
35V 5%≦
20%≦
0805≥2.2µF;1210 10µF≧
10%≦
0201 0.01µF;0805≧1µF; 1210 10µF≧ ≧
14%≦
0603 0.33µF;1206 4.7µF≧ ≧
25V 5%≦
15%≦
0402 0.10µF;0603 0.47µF;0805 2.2µF;1206 6.8µF;≧ ≧ ≧ ≧
1210≧22µF
10%≦
0603 0.15µF;0805 0.68µF;1206 2.2µF;1210 4.7µF≧ ≧ ≧ ≧
16V 5≦％
15%≦
0201 0.01µF;0402 0.033µF;0603 0.68µF;0805 2.2µF;≧ ≧ ≧ ≧
1206 4.7µF; 1210 22µF ≧ ≧
15%≦
0402 0.33µF; 0603 0.33µF;0805 2.2µF≧ ≧ ≧ ;
1206 2.2µF; 1210 22µF≧ ≧
10V 7.5%≦
20%≦
0201 0.1µF ;0402 1µF ≧ ≧
6.3V
15%≦
30%≦
0201 0.1µF;0402 1µF;0603 10µF;≧ ≧ ≧
0805 4.7µF;1206 47µF;1210 100µF ≧ ≧ ≧
4V ≦20%
--- ---
Y5V:
Rated vol.
D.F.≦
Exception of D.F.≦
50V≧ 7.5% 10% 0603 0.1≧µF; 0805 0.47≧µF;
1206 4.7≧µF
35V 10% --- ---
10%
0402 0.047≧µF;0603 0.1≧µF;
0805 0.33≧µF;1206 1≧µF;
1210 4.7≧µF
25V 7.5%
15%
0402 0.068≧µF;0603 0.47≧µF;
1206 4.7≧µF; 1210 22≧µF
12.5%
0402 0.068≧µF; 0603 0.68≧µF
16V
(C<1.0µF)
10% 20% 0402 0.22≧µF
16V
(C 1.0≧µF)
12.5%
20% 0603 2.2≧µF; 0805 3.3≧µF;
1206 10≧µF;1210 22≧µF;
1812 47≧µF;
10V 20% 30% 0402 0.47≧µF
6.3V 30% --- ---
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X5R, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
50V:0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0805≥2.2µF;1210≧10µF
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
16V:0402≥0.22µF;0603≥1µF;0805≥2.2µF;1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V
1GΩ or RxC
≧10 Ω-F
whichever is
smaller.
Approval sheet
High Capacitance Capacitors
Page 12 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
No
Item Test Condition Requirements
14
Humidity (Damp
Heat) Load
* Test temp.: 40±2°C
* Humidity: 90~95%RH
* Test time: 500+24/-0 hrs.
* To apply voltage：rated voltage.
* Measurement to be made after
keeping at room temp. for 24±2 hrs.
(Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
Cap change:
NP0: ±7.5% or 0.75pF whichever is larger.
X7R, X7E, X5R: ≥10V**,within ±12.5%;6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V:0603 4.7≧µF;0402≧1µF;0201 0.1≧µF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
Q/D.F. value:
NP0: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C
X7R, X5R:
Rated
vol. D.F.≦
Exception of D.F. ≦
6%≦
0201(50V);0603 0.047µF; 0805 0.18µF; 1206 0.47µF≧ ≧ ≧
10%≦
1210 4.7µF≧
50V≧
3%≦
20%≦
0603 1µF; 0805 1µF;1206 4.7µF; 1210 10µF≧ ≧ ≧ ≧
35V 5%≦
20%≦
0805≥2.2µF;1210 10µF≧
10%≦
0201 0.01µF;0805 1µF; 1210 10µF≧ ≧ ≧
14%≦
0603 0.33µF;1206 4.7µF≧ ≧
25V 5%≦
15%≦
0402 0.10µF;0603 0.47µF;0805 2.2µF;1206 6.8µF;≧ ≧ ≧ ≧
1210≧22µF
10%≦
0603 0.1≧5µF;0805 0.68µF;1206 2.2µF;1210 4.7µF≧ ≧ ≧
16V 5≦％
15%≦
0201 0.01µF;0402 0.033µF;0603 0.68µF;0805 2.2µF;≧ ≧ ≧ ≧
1206 4.7µF; 1210 22µF ≧ ≧
15%≦
0402 0.33µF; 0603 0.33µF;0805 2.2µF≧ ≧ ≧ ;
1206 2.2µF; 1210 22µF≧ ≧
10V 7.5%≦
20%≦
0201 0.1µF ;0402 1µF ≧ ≧
6.3V
15%≦
30%≦
0201 0.1µF;0402 1≧ ≧ µF;0603 10µF;≧
0805 4.7µF;1206 47µF;1210 100µF ≧ ≧ ≧
4V ≦20%
--- ---
Y5V:
Rated vol.
D.F.≦
Exception of D.F.≦
50V≧ 7.5% 10% 0603 0.1≧µF; 0805 0.47≧µF;
1206 4.7≧µF
35V 10% --- ---
10%
0402 0.047≧µF;0603 0.1≧µF;
0805 0.33≧µF;1206 1≧µF;
1210 4.7≧µF 25V 7.5%
15%
0402 0.068≧µF;0603 0.47≧µF;
1206 4.7≧µF; 1210 22≧µF
12.5%
0402 0.068≧µF; 0603 0.68≧µF
16V
(C<1.0µF)
10% 20% 0402 0.22≧µF
16V
(C 1.0≧µF)
12.5%
20% 0603 2.2≧µF; 0805 3.3≧µF;
1206 10≧µF;1210 22≧µF;
1812 47≧µF;
10V 20% 30% 0402 0.47≧µF
6.3V 30% --- ---
*I.R.: ≥10V, 500MΩ or 25 Ω-F whichever is smaller.
Class II (X7R, X5R, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
50V:0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0805≥2.2µF;1210≧10µF
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
16V:0402≥0.22µF;0603≥1µF;0805≥2.2µF;1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V
500MΩ or
RxC≧5 Ω-F
whichever is
smaller.
Approval sheet
High Capacitance Capacitors
Page 13 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
No
Item Test Condition Requirements
15.
High Temperature
Load
(Endurance)
*
Test temp.：
NP0, X7R/X7E: 125±3°C
X5R, Y5V: 85±3°C
*Test time: 1000+24/
-0 hrs.
*To apply voltage:
(1) 6.3V or C 10µF≧
or TT series:
150% of rated voltage.
(2) 10V Ur<500V: ≦
200% of rated voltage.
(3) 500V: 150% of rated voltage.
(4) Ur 630V: ≧
120% of rated voltage.
(5) 100% of rated voltage for
below range.
Size
Dielec
tric
Rated
voltage Capacitance
range
0201
X5R
6.3V,10V
C 0.1µF≧
0402
X5R,
6.3V,10V
C 1.0µF≧
0603
X5R
6.3V,10V
C 4.7µF≧
0805
X5R
6.3V C 22µF≧
X5R
6.3V C≧47µF
1206
NP0
3000V C 1.5pF≧
(6)150% of rated voltage for
below range.
Size
Dielectric
Rated
voltage
Capacitance
range
X5R
10V,16V,
25V
C≧0.22µF
0402
Y5V 16V C≧0.47µF
X5R
10V,16V
C 1.0µF≧
0603
Y5V 16V C≧2.2µF
X5R 10V C 4.7µF≧
0805
Y5V 16V C≧4.7µF
* Measurement to be made after
keeping at room temp. for 24±2
hrs. (Class I) or 48±4 hrs. (Class
II).
* No remarkable damage.
Cap change:
NP0: ±3.0% or ±0.3pF whichever is larger
X7R, X7E, X5R: ≥10V**,within ±12.5%;6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V:0603 4.≧7µF;0402≧1µF;0201 0.1≧µF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
Q/D.F. value:
NP0: More than 30pF, Q≥350
10pF≤C<30pF, Q≥275+2.5C
Less than 10pF, Q≥200+10C
X7R, X5R:
Rated
vol. D.F.≦
Exception of D.F. ≦
6%≦
0201(50V);0603 0.047µF; 0805 0.18µF; 1206 0.47µF≧ ≧ ≧
10%≦
1210 4.7µF≧
50V≧
3%≦
20%≦
0603 1µF; 0805 1µF;1206 4.7µF; 1210 10µF≧ ≧ ≧ ≧
35V 5%≦
20%≦
0805≥2.2µF;1210 10µF≧
10%≦
0201 0.01µF;0805 1µF; 1210 10µF≧ ≧ ≧
14%≦
0603 0.33µF;1206 4.7µF≧ ≧
25V 5%≦
15%≦
0402 0.10µF;0603 0.47µF;0805 2.≧≧≧2µF;1206 6.8µF;≧
1210≧22µF
10%≦
0603 0.15µF;0805 0.68µF;1206 2.2µF;1210 4.7µF≧ ≧ ≧ ≧
16V 5≦％
15%≦
0201 0.01µF;0402 0.033µF;0603 0.68µF;0805 2.2µF;≧ ≧ ≧ ≧
1206 4.7µF; 1210 22µF ≧ ≧
15%≦
0402 0.33µF; 0603 0.33µF;0805 2.2µF≧ ≧ ≧ ;
1206 2.2µF; 1210 22µF≧ ≧
10V 7.5%≦
20%≦
0201 0≧.1µF ;0402 1µF ≧
6.3V
15%≦
30%≦
0201 0.1µF;0402 1µF;0603 10µF;≧ ≧ ≧
0805 4.7µF;1206 47µF;1210 100µF ≧ ≧ ≧
4V ≦20%
--- ---
Y5V:
Rated vol.
D.F.≦
Exception of D.F.≦
50V≧ 7.5% 10% 0603 0.1≧µF; 0805 0.47≧µF;
1206 4.7≧µF
35V 10% --- ---
10%
0402 0.047≧µF;0603 0≧.1µF;
0805 0.33≧µF;1206 1≧µF;
1210 4.7≧µF 25V 7.5%
15%
0402 0.068≧µF;0603 0.47≧µF;
1206 4.7≧µF; 1210 22≧µF
12.5%
0402 0.068≧µF; 0603 0.68≧µF
16V
(C<1.0µF)
10% 20% 0402 0.22≧µF
16V
(C 1.0≧µF)
12.5%
20% 0603 2.2≧µF; 0805 3.3≧µF;
1206 10≧µF;1210 22≧µF;
1812 47≧µF;
10V 20% 30% 0402 0.47≧µF
6.3V 30% --- ---
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X5R, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
50V:0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0805≥2.2µF;1210≧10µF
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
16V:0402≥0.22µF;0603≥1µF;0805≥2.2µF;1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V
1GΩ or RxC
≧10 Ω-F
whichever is
smaller.
Approval sheet
High Capacitance Capacitors
Page 14 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
APPENDIXES
◙ Tape & reel dimensions
Size 0402 0603 0805 1206 1210 1812
Thickness
N S, X A B C, D, I
B C, J, D
G,P C, D G, K M D, K M U
A
0
0.62±0.05
1.02±0.05
1.50±0.10
1.50±0.10
<1.57 2.00±0.10
<1.85 <1.95 <2.97 <2.97 <2.97 <3.81 <3.81 <3.90
B
0
1.12±0.05
1.80±0.05
2.30±0.10
2.30±0.10
<2.40 3.50±0.10
<3.46 <3.67 <3.73 <3.73 <3.73 <5.30 <5.30 <5.30
T 0.60±0.05
0.95±0.05
0.75±0.05
0.95±0.05
0.23±0.05
0.95±0.05
0.23±0.05
0.23±0.05
0.23±0.05
0.23±0.05
0.23±0.05
0.25±0.05
0.25±0.05
0.25±0.05
K
0
- - - - <2.50 - <2.50 <2.50 <2.50 <2.50 <3.00 <2.50 <3.00 <3.50
W 8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
12.0±0.20
12.0±0.20
12.0±0.20
P
0
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
10xP
0
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.20
P
1
2.00±0.05
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
P
2
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
D
0
1.55±0.05
1.55±0.05
1.55±0.05
1.55±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.10
D
1
- - - - 1.00±0.10
- 1.00±0.10
1.00±0.10
1.00±0.10
1.00±0.10
1.00±0.10
1.50±0.10
1.50±0.10
1.50±0.10
E 1.75±0.05
1.75±0.05
1.75±0.05
1.75±0.05
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
F 3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
5.50±0.05
5.50±0.05
5.50±0.05
Fig. 7 The dimension of plastic tape
Fig. 8 The dimension of reel
Fig. 6 The dimension of paper tape
Size 0402, 0603, 0805, 1206, 1210 1812
Reel size
7” 10” 13” 7”
C 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2
W
1
8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 12.4+2.0/-0
A 178.0±0.10 250.0±1.0 330.0±1.0 178.0±0.10
N 60.0+1.0/-0 100.0±1.0 100±1.0 60.0+1.0/-0
Approval sheet
High Capacitance Capacitors
Page 15 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
◙ Description of customer label
◙ Constructions
◙ Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low
reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
.
No.
Name X7R, X5R, Y5V
1
Ceramic material BaTiO
3
based
2
Inner electrode Ni
3
Inner layer Cu
4
Middle layer Ni
5
Termination
Outer layer Sn (Matt)
Fig. 9 The construction of MLCC
a. Customer name
b. WTC order series and item number
c. Customer P/O
d. Customer P/N
e. Description of product
f. Quantity
g. Bar code including quantity & WTC P/N or customer
h. WTC P/N
i. Shipping date
j. Order bar code including series and item numbers
k. Serial number of label
Approval sheet
High Capacitance Capacitors
Page 16 of 16 ASC_ High Capacitance_002T_AS Aug. 2012
◙ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable
against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N
2
within oven are recommended.
Fig. 10 Recommended reflow soldering profile for SMT process
with SnAgCu series solder paste.
4℃
℃℃
℃/ sec max
Over 60sec at least by
natural cooling
4℃
℃℃
℃/ sec max
Over 60sec at least by
natural cooling
Fig. 11 Recommended wave soldering profile for SMT process
with SnAgCu series solder.
