MAL219691254E3 - Vishay / BC Components

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 1Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Hybrid Energy Storage Capacitors

Image is not to scale

FEATURES

• Polarized energy storage capacitor with high

capacity and energy density

• Voltage flexibility: 1.4 V (single cell) to 2.8 V /

4.2 V / 5.6 V / 7.0 V / 8.4 V (multiple cells)

• Available in stacked through-hole (STH, radial),

surface-mount flat (SMF) and lay flat configurations (LFC)

with wire and connectors

• Useful life: up to 2000 h at 85 °C

• No cell balancing necessary

• Soft and low transient-voltage-controlled charging

characteristic

• Non-hazardous electrolyte

• Maintenance-free, no service necessary

• Evaluation kits for engineering are available under

ordering code: MAL219699001E3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Power backup for memory controller, flash backup, RAID

systems, SRAM, DRAM

• Power failure and write cache protection for enterprise

SSD and HDD

• Real time clock power source

• Burst power support for flash lights, wireless transmitters

• Backup power for industrial PC’s and industrial controls

• Storage device for energy harvesting

• Emergency light and micro UPS power source

MARKING

The capacitors are marked with the following information:

• Rated capacitance (in F)

• Rated voltage (in V)

• Date code

• Negative / positive terminal identification

PACKAGING

Supplied in ESD trays only

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 2Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

QUICK REFERENCE DATA

DESCRIPTION VALUE

SINGLE CELL 2 CELLS 3 CELLS 4 CELLS 5 CELLS 6 CELLS

Nominal case size (Ø D x L in mm)

Stacked Through-Hole (STH)

7 x 2.5

12 x 2.5

25 x 15 x 2.5

35 x 25 x 5

7 x 5

12 x 5

25 x 15 x 5

35 x 25 x 7.5

7 x 7.5

12 x 7.5

25 x 15 x 7.5

35 x 25 x 10

7 x 10

12 x 10

25 x 15 x 10

35 x 25 x 15

7 x 12.5

12 x 12.5

35 x 25 x 17.5

7 x 15

12 x 15

35 x 25 x 20

Nominal case size (Ø W x L x H in mm)

Surface-Mount Flat (SMF)

7 x 7 x 2.5

12 x 12 x 2.5

7 x 14 x 2.5

12 x 24 x 2.5

13 x 14 x 2.5

22 x 24 x 2.5

14 x 14 x 2.5

24 x 24 x 2.5

Nominal case size (W x L x H in mm)

Lay Flat (LFC) 14.5 x 12 x 2.5 14.5 x 24 x 2.5 14.5 x 36 x 2.5 14.5 x 48 x 2.5 14.5 x 60 x 2.5 14.5 x 72 x 2.5

Rated capacitance range, CR

4.0 F

15.0 F

45.0 F

90.0 F

4.0 F

15.0 F

45.0 F

90.0 F

4.0 F

15.0 F

45.0 F

90.0 F

4.0 F

15.0 F

45.0 F

90.0 F

4.0 F

15.0 F

90.0 F

4.0 F

15.0 F

90.0 F

Tolerance on CR at 20 °C -20 % to +80 %

Rated voltage, UR1.4 V 2.8 V 4.2 V 5.6 V 7.0 V 8.4 V

Maximum surge voltage, US (max. 30 s) 1.6 V 3.2 V 4.8 V 6.4 V 8.0 V 9.6 V

Minimum stored energy

4 Ws

17 Ws

50 Ws

115 Ws

9 Ws

35 Ws

100 Ws

230 Ws

13 Ws

52 Ws

150 Ws

345 Ws

18 Ws

70 Ws

200 Ws

460 Ws

22 Ws

87 Ws

575 Ws

27 Ws

105 Ws

690 Ws

Energy density 9 Ws/g to 13 Ws/g

Category temperature range 4.0 F: -20 °C to +70 °C

15.0 F / 45.0 F / 90.0 F: -20 °C to +85 °C

Storage temperature range -40 °C to +85 °C

Useful life at UR

4.0 F: at 70 °C: 1000 h 15.0 F: at 85 °C: 1000 h

45.0 F,

90.0 F: at 85 °C: 2000 h

at 55 °C: 2800 h at 70 °C: 2800 h at 70 °C: 5600 h

at 45 °C: 5600 h at 60 °C: 5600 h at 60 °C: 11 200 h

Shelf life 1000 h at upper category temperature

Climatic category IEC60068 25 / 085 / 21

SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE (UCT)

(F) FORM UR (V)

1.4 2.8 4.2 5.6 7.0 8.4

A2 7.0 x 2.5 7.0 x 5.0 7.0 x 7.5 7.0 x 10.0 7.0 x 12.5 7.0 x 15.0

B2 7.0 x 2.5 7.0 x 5.0 7.0 x 7.5 7.0 x 10.0 7.0 x 12.5 7.0 x 15.0

C 7.0 x 7.0 x 2.5 - - - - -

D 7.0 x 7.0 x 2.5 - - - - -

E - 7.0 x 14.0 x 2.5 13.0 x 14.0 x 2.5 14.0 x 14.0 x 2.5 - -

A2 12.0 x 2.5 12.0 x 5.0 12.0 x 7.5 12.0 x 10.0 12.0 x 12.5 12.0 x 15.0

B2 12.0 x 2.5 12.0 x 5.0 12.0 x 7.5 12.0 x 10.0 12.0 x 12.5 12.0 x 15.0

C 12.0 x 12.0 x 2.5 - - - - -

D 12.0 x 12.0 x 2.5 - - - - -

E - 12.0 x 24.0 x 2.5 22.0 x 24.0 x 2.5 24.0 x 24.0 x 2.5 - -

F 14.5 x 12.0 x 2.5 14.5 x 24.0 x 2.5 14.5 x 36.0 x 2.5 14.5 x 48.0 x 2.5 14.5 x 60.0 x 2.5 14.5 x 72.0 x 2.5

45 I25 x 15 x 2.5 25 x 15 x 5 25 x 15 x 7.5 25 x 15 x 10 - -

90 G35 x 25 x 5 35 x 25 x 7.5 35 x 25 x 10 35 x 25 x 15 35 x 25 x 17.5 35 x 25 x 20

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 3Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters AND AVAILABLE FORMS

STACKED THROUGH HOLE CONFIGURATION (STH): Examples VERTICAL MOUNT

Fig. 1 - Form A2: Stacked Through Hole (example 4 cells, 2 pins) (1)

STACKED THROUGH HOLE CONFIGURATION (STH): Examples HORIZONTAL MOUNT

Fig. 2 - Form B2: Stacked Through Hole (example 5 cells, 2 pins) (1)

Fig. 3 - Form B3: Stacked Through Hole (example 4 cells, keyed polarity - 3 pins) (1)

Note

(1) Bottom and top are not isolated

SURFACE MOUNT FLAT CONFIGURATION (SMF): Examples

Fig. 4 - Form C: Surface Mount Flat (single cell, keyed polarity)

Lmax.

Ø Dmax.

Ø 0.8 Ø 0.64

6 (2 x)

+ 0.5

- 0.5

Lmax.

Ø Dmax.

Ø 0.64

3.5 (2 x)

+ 0.5

- 0.5

Lmax.

FØ 0.64 (3 x)

Ø Dmax.

3.5 (3 x)

+ 0.5

- 0.5

3 (2 x)

0.1 (2 x)

0.5 (2 x)

3.8 max.

3.5 (2 x)

+ 0.5

- 0.5

4 (2 x)

+ 0.5

- 0.5

Lmax.

Ø Dmax.

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 4Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Form D1: Surface Mount Flat (single cell, keyed polarity)

Fig. 6 - Form D2: Surface Mount Flat (single cell, keyed polarity)

Fig. 7 - Form E2: Surface Mount Flat

Fig. 8 - Form E3: Surface Mount Flat

Fig. 9 - Form E4: Surface Mount Flat

3+0.5

-0.5

Ø 7.5 max.

0.75 (2 x)

0.1 (2 x)

2.8 max.

(including tags thickness)

R1.5

(inner radius)

0.5

1.35

8.9 (2 x)

+0.5

-0.5

3+ 0.5

- 0.5

3.5+ 0.2

- 0.2

Ø 12.5 max.

0.1 (2 x)

2.8 max.

1.0 (2 x)

Ø Dmax.

3 (2 x)

Ø Dmax. 3.8 max.

0.5 (2 x)

1 (2 x)

0.1 (2 x)

4 (2 x)

+ 0.5

- 0.5

Hmax.

Lmax.

3 (2 x)

0.1 (2 x)

4 ± 1 (2 x)

0.5 (2 x)

1 (2 x)

3.8 max.

Hmax.

3.8 max.

0.5 (2 x) 0.1 (2 x)

1 (2 x)

Lmax.

3 (2 x)

4 (2 x)

+ 1

- 1

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 5Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

LAY FLAT CONFIGURATION (LFC) WITH CONNECTOR: Example 5 cells in series

Fig. 10 - Form F: Lay Flat (example for 5 cells)

Fig. 11 - Form I: Stacked Through Hole Oval (PCBD)

Fig. 12 - Form K: Stacked Through Hole Oval Horizontal

Fig. 13 - Form G: Stacked Through Hole Oval (PCBD)

Red (AWG 28, UL 1061)

Black (AWG 28, UL 1061)

Molex connector;

Housing: 51146-0200

Terminal: 50641-8041

Lmax.

3.5 max.

Ø Dmax.

Pin 1: red

Pin 2: black

50 + 5

- 5

Lmax.

4 (3 x)

1 (2 x)

+ 0.5

- 0.5

27 max.

15.5 max.

F0.25 (2 x)

Lmax.

27 max.

1 (3 x)

4 (2 x)

+ 0.5

- 0.5

0.2 (2 x)

0.5

+ 0.5

- 0.5

Lmax.

4 (3 x)

1 (2 x)

+ 0.5

- 0.5

35 max.

25 max.

0.25 (2 x)

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 6Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 14 - Form H: Stacked Through Hole Oval Horizontal

Table 1

DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES

NOMINAL CASE SIZE

D x L x H (mm) FORM Ø Dmax. Lmax. L1max. Hmax. MASS

(g)

7.0 x 7.0 x 2.5 A2, B2, B3 7.5 2.3 + 0.3 7.0 + 0.5 - 0.5

7.0 x 7.0 x 2.5 C 7.5 7.0 7.0 + 8.0 - 0.5

7.0 x 7.0 x 2.5 D1 7.5 7.0 7.0 + 4.0 - 0.5

7.0 x 7.0 x 5.0 A2, B2, B3 7.5 4.2 4.2 + 0.5 - 0.8

7.0 x 7.0 x 7.5 A2, B2, B3 7.5 7.5 7.8 + 0.5 - 1.5

7.0 x 7.0 x 10.0 A2, B2, B3 7.5 10.5 10.2 + 0.5 - 1.8

7.0 x 7.0 x 12.5 A2, B2, B3 7.5 12.5 12.4 + 0.5 - 2.5

7.0 x 7.0 x 15.0 A2, B2, B3 7.5 14.8 14.8 + 0.5 - 3.0

12.0 x 12.0 x 2.5 A2, B2, B3 12.5 2.3 2.3 + 0.5 - 1.2

12.0 x 12.0 x 2.5 C 12.5 12.5 12.5 + 8.0 - 1.0

12.0 x 12.0 x 2.5 D2 12.5 12.5 12.5 + 4.0 - 1.0

12.0 x 12.0 x 5.0 A2, B2, B3 12.5 4.2 4.2 + 0.5 - 2.2

12.0 x 12.0 x 7.5 A2, B2, B3 12.5 8.0 7.8 + 0.5 - 3.3

12.0 x 12.0 x 10.0 A2, B2, B3 12.5 10.5 10.5 + 0.5 - 4.0

12.0 x 12.0 x 12.5 A2, B2, B3 12.5 12.5 12.5 + 0.5 - 5.4

12.0 x 12.0 x 15.0 A2, B2, B3 12.5 14.8 14.8 + 0.5 - 6.5

7.0 x 14.0 x 2.5 E2 7.5 14.8 14.8 + 8.0 - 1.0

12.0 x 24.0 x 2.5 E2 12.5 24.0 24.0 + 8.0 - 2.0

13.0 x 14.0 x 2.5 E3 14.0 15.0 14.8 + 8.0 14.0 1.2

22.0 x 24.0 x 2.5 E3 24.0 24.0 24.8 + 8.0 15.0 3.3

14.0 x 14.0 x 2.5 E4 15.0 15.0 14.8 + 8.0 22.5 1.5

24.0 x 24.0 x 2.5 E4 24.0 24.0 24.8 + 8.0 24.0 4.4

14.5 x 12.0 x 2.5 F 14.5 12.0 12.0 + 50.0 - 1.0

14.5 x 24.0 x 2.5 F 14.5 24.0 24.0 + 50.0 - 3.0

14.5 x 36.0 x 2.5 F 14.5 36.0 36.0 + 50.0 - 4.0

14.5 x 48.0 x 2.5 F 14.5 48.0 48.0 + 50.0 - 6.0

14.5 x 60.0 x 2.5 F 14.5 60.0 60.0 + 50.0 - 7.5

14.5 x 72.0 x 2.5 F 14.5 72.0 72.0 + 50.0 - 9.0

25 x 15 x 2.5 I, K 27 x 15.5 3.0 2.5 ± 0.5 - 1.5

25 x 15 x 5.0 I, K 27 x 15.5 5.0 5.0 ± 0.5 - 3.0

25 x 15 x 7.5 I, K 27 x 15.5 7.0 7.0 ± 0.5 - 4.5

25 x 15 x 10.0 I, K 27 x 15.5 9.0 9.0 ± 0.5 - 6.0

35 x 25 x 5.0 G, H 35 x 25 3.7 3.6 ± 0.1 - 7.5

35 x 25 x 7.5 G, H 35 x 25 7.5 7.5 + 0.5 - 15.0

35 x 25 x 10.0 G, H 35 x 25 10.5 10.5 + 0.5 - 22.5

35 x 25 x 15.0 G, H 35 x 25 15.0 14.5 + 0.5 - 30.0

35 x 25 x 17.5 G, H 35 x 25 17.8 16.8 ± 1.0 - 45.0

35 x 25 x 20.0 G, H 35 x 25 21.1 20.1 ± 1.0 - 50.0

Lmax.

35 max.

1 (3 x)

4 (2 x)

+ 0.5

- 0.5

0.2 (2 x)

0.5

+ 0.5

- 0.5

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 7Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Unless otherwise specified, all electrical values in Table 2 apply

at Tamb = 20 °C, P = 86 kPa to 106 kPa and RH = 45 % to 75 %

ORDERING EXAMPLE

Hybrid Storage Capacitor

15 F / 1.4 V

Nominal case size: Ø 12.0 mm x 2.5 mm; Form B3

Ordering code: MAL219691211E3

Table 2

ELECTRICAL DATA

SYMBOL DESCRIPTION

CRRated capacitance, tolerance -20 % / +80 %, 

measured by constant current discharge method

UCT Upper category temperature

ILMax. leakage current after 24 h at UR

RIMax. internal resistance at 1 kHz

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

(F)

NOMINAL

CASE SIZE

Ø D x L

D x L x H

(mm)

CASE

CODE

FOR

(mm)

UCT

(°C)

24 h

(mA)

ESR

AC (1)

1 kHz

()

ESR

DC (2)

()

MIN.

STORAGE

ENERGY

(Ws)

PACKAGING

QUANTITIES ORDERING CODE

STACKED THROUGH HOLE CONFIGURATION (STH) - VERTICAL MOUNT

1.4 4 7.0 x 2.5 2 pin A2 7.5 - 70 0.03 2.5 7.5 4.6 80 MAL219691101E3

2.8 4 7.0 x 5.0 2 pin A2 7.5 - 70 0.03 5.0 15.0 9.2 80 MAL219691102E3

4.2 4 7.0 x 7.5 2 pin A2 7.5 - 70 0.03 7.5 22.5 13.8 80 MAL219691103E3

5.6 4 7.0 x 10.0 2 pin A2 7.5 - 70 0.03 10.0 30.0 18.4 80 MAL219691104E3

7.0 4 7.0 x 12.5 2 pin A2 7.5 - 70 0.03 12.5 37.5 23.0 84 MAL219691105E3

8.4 4 7.0 x 15.0 2 pin A2 7.5 - 70 0.03 15.0 45.0 27.6 84 MAL219691106E3

1.4 15 12.0 x 2.5 2 pin A2 12.5 - 85 0.12 0.6 2.5 17.5 80 MAL219691201E3

2.8 15 12.0 x 5.0 2 pin A2 12.5 - 85 0.12 1.2 5.0 35.0 80 MAL219691202E3

4.2 15 12.0 x 7.5 2 pin A2 12.5 - 85 0.12 1.8 7.5 52.5 80 MAL219691203E3

5.6 15 12.0 x 10.0 2 pin A2 12.5 - 85 0.12 2.4 10.0 70.0 80 MAL219691204E3

7.0 15 12.0 x 12.5 2 pin A2 12.5 - 85 0.12 3.0 12.5 87.5 90 MAL219691205E3

8.4 15 12.0 x 15.0 2 pin A2 12.5 - 85 0.12 3.6 15.0 105.0 90 MAL219691206E3

STACKED THROUGH HOLE CONFIGURATION (STH) - HORIZONTAL MOUNT

1.4 4 7.0 x 2.5 2 pin B2 3.2 - 70 0.03 2.5 7.5 4.6 100 MAL219691121E3

2.8 4 7.0 x 5.0 2 pin B2 5.4 - 70 0.03 5.0 15.0 9.2 100 MAL219691122E3

4.2 4 7.0 x 7.5 2 pin B2 7.5 - 70 0.03 7.5 22.5 13.8 96 MAL219691123E3

5.6 4 7.0 x 10.0 2 pin B2 8.8 - 70 0.03 10.0 30.0 18.4 96 MAL219691124E3

7.0 4 7.0 x 12.5 2 pin B2 12 - 70 0.03 12.5 37.5 23.0 60 MAL219691125E3

8.4 4 7.0 x 15.0 2 pin B2 14.5 - 70 0.03 15.0 45.0 27.6 60 MAL219691126E3

1.4 15 12.0 x 2.5 2 pin B2 3.2 - 85 0.12 0.6 2.5 17.5 100 MAL219691221E3

2.8 15 12.0 x 5.0 2 pin B2 5.8 - 85 0.12 1.2 5.0 35.0 100 MAL219691222E3

4.2 15 12.0 x 7.5 2 pin B2 8.3 - 85 0.12 1.8 7.5 52.5 80 MAL219691223E3

5.6 15 12.0 x 10.0 2 pin B2 11.0 - 85 0.12 2.4 10.0 70.0 90 MAL219691224E3

7.0 15 12.0 x 12.5 2 pin B2 13.4 - 85 0.12 3.0 12.5 87.5 40 MAL219691225E3

8.4 15 12.0 x 15.0 2 pin B2 15.7 - 85 0.12 3.6 15.0 105.0 40 MAL219691226E3

1.4 4 7.0 x 2.5 3 pin B3 2.8 2.5 70 0.03 2.5 7.5 4.6 100 MAL219691111E3

2.8 4 7.0 x 5.0 3 pin B3 5.1 2.5 70 0.03 5.0 15.0 9.2 100 MAL219691112E3

4.2 4 7.0 x 7.5 3 pin B3 7.5 2.5 70 0.03 7.5 22.5 13.8 96 MAL219691113E3

5.6 4 7.0 x 10.0 3 pin B3 10.0 2.5 70 0.03 10.0 30.0 18.4 96 MAL219691114E3

7.0 4 7.0 x 12.5 3 pin B3 12.0 2.5 70 0.03 12.5 37.5 23.0 60 MAL219691115E3

8.4 4 7.0 x 15.0 3 pin B3 14.5 2.5 70 0.03 15.0 45.0 27.6 60 MAL219691116E3

1.4 15 12.0 x 2.5 3 pin B3 3.2 5.0 85 0.12 0.6 2.5 17.5 100 MAL219691211E3

2.8 15 12.0 x 5.0 3 pin B3 5.8 5.0 85 0.12 1.2 5.0 35.0 100 MAL219691212E3

4.2 15 12.0 x 7.5 3 pin B3 8.0 5.0 85 0.12 1.8 7.5 52.5 80 MAL219691213E3

5.6 15 12.0 x 10.0 3 pin B3 11.0 5.0 85 0.12 2.4 10.0 70.0 90 MAL219691214E3

7.0 15 12.0 x 12.5 3 pin B3 13.0 5.0 85 0.12 3.0 12.5 87.5 40 MAL219691215E3

8.4 15 12.0 x 15.0 3 pin B3 16.0 5.0 85 0.12 3.6 15.0 105.0 40 MAL219691216E3

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 8Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) ESR AC 1 kHz are typical values

(2) ESR DC are typical values

Table 3

Note

(1) n... number of cells, permanent operation below lowest discharge voltage is not permitted

SURFACE MOUNT FLAT CONFIGURATION (SMF)

1.4 4 7.0 x 7.0 x 2.5 2 pin C - - 70 0.03 2.5 7.5 4.6 50 MAL219691131E3

1.4 15 12.0 x 12.0 x 2.5 2 pin C - - 85 0.12 0.6 2.5 17.5 100 MAL219691231E3

1.4 4 7.0 x 7.0 x 2.5 2 pin D1 - - 70 0.03 2.5 7.5 4.6 50 MAL219691141E3

1.4 15 12.0 x 12.0 x 2.5 2 pin D2 - - 85 0.12 0.6 2.5 17.5 100 MAL219691241E3

2.8 4 7.0 x 14.0 x 2.5 2 pin E2 - - 70 0.03 5.0 15.0 9.2 50 MAL219691152E3

2.8 15 12.0 x 24.0 x 2.5 2 pin E2 - - 85 0.12 1.2 5.0 35.0 50 MAL219691252E3

4.2 4 13.0 x 14.0 x 2.5 3 pin E3 - - 70 0.03 7.5 22.5 13.8 70 MAL219691153E3

4.2 15 22.0 x 24.0 x 2.5 3 pin E3 - - 85 0.12 1.8 7.5 52.5 35 MAL219691253E3

5.6 4 14.0 x 14.0 x 2.5 4 pin E4 - - 70 0.03 10.0 30.0 18.4 70 MAL219691154E3

5.6 15 24.0 x 24.0 x 2.5 4 pin E4 - - 85 0.12 2.4 10.0 70.0 35 MAL219691254E3

LAY FLAT CONFIGURATION (LFC)

1.4 15 14.5 x 12.0 x 2.5 2 pin F - - 85 0.12 0.6 2.5 17.5 40 MAL219691261E3

2.8 15 14.5 x 24.0 x 2.5 2 pin F - - 85 0.12 1.2 5.0 35.0 40 MAL219691262E3

4.2 15 14.5 x 36.0 x 2.5 2 pin F - - 85 0.12 1.8 7.5 52.5 40 MAL219691263E3

5.6 15 14.5 x 48.0 x 2.5 2 pin F - - 85 0.12 2.4 10.0 70.0 20 MAL219691264E3

7.0 15 14.5 x 60.0 x 2.5 2 pin F - - 85 0.12 3.0 12.5 87.5 20 MAL219691265E3

8.4 15 14.5 x 72.0 x 2.5 2 pin F - - 85 0.12 3.6 15.0 105.0 20 MAL219691266E3

STACKED THROUGH HOLE OVAL

1.4 45 25 x 15 x 2.5 3 pin I 3.5 10 85 0.15 0.25 0.5 50.0 30 MAL219690206E3

2.8 45 25 x 15 x 5.0 3 pin I 5 10 85 0.15 0.5 1.0 100.0 30 MAL219690203E3

4.2 45 25 x 15 x 7.5 3 pin I 7.5 10 85 0.15 0.75 1.5 150.0 30 MAL219690201E3

5.6 45 25 x 15 x 10.0 3 pin I 10 10 85 0.15 1.0 2.0 200.0 30 MAL219690202E3

1.4 90 35 x 25 x 5.0 3 pin G 5 10 85 0.5 0.015 0.045 115.0 25 MAL219690106E3

2.8 90 35 x 25 x 7.5 3 pin G 7.5 10 85 0.5 0.03 0.090 230.0 25 MAL219690103E3

4.2 90 35 x 25 x 10.0 3 pin G 10 10 85 0.5 0.04 0.135 345.0 25 MAL219690101E3

5.6 90 35 x 25 x 15.0 3 pin G 12.5 10 85 0.5 0.06 0.180 460.0 25 MAL219690102E3

7.0 90 35 x 25 x 17.5 3 pin G 17.5 10 85 0.5 0.075 0.225 575.0 25 MAL219690107E3

8.4 90 35 x 25 x 20.0 3 pin G 20.0 10 85 0.5 0.09 0.270 690.0 25 MAL219690108E3

STACKED THROUGH HOLE OVAL HORIZONTAL

1.4 45 25 x 15 x 2.5 3 pin K 15 10 85 0.15 0.25 0.5 50.0 30 MAL219690216E3

2.8 45 25 x 15 x 5.0 3 pin K 15 10 85 0.15 0.5 1.0 100.0 30 MAL219690213E3

4.2 45 25 x 15 x 7.5 3 pin K 15 10 85 0.15 0.75 1.5 150.0 30 MAL219690211E3

5.6 45 25 x 15 x 10.0 3 pin K 15 10 85 0.15 1.0 2.0 200.0 30 MAL219690212E3

1.4 90 35 x 25 x 5.0 3 pin H 25 10 85 0.5 0.015 0.045 115.0 25 MAL219690116E3

2.8 90 35 x 25 x 7.5 3 pin H 25 10 85 0.5 0.03 0.090 230.0 25 MAL219690113E3

4.2 90 35 x 25 x 10.0 3 pin H 25 10 85 0.5 0.04 0.135 345.0 25 MAL219690111E3

5.6 90 35 x 25 x 15.0 3 pin H 25 10 85 0.5 0.06 0.180 460.0 25 MAL219690112E3

7.0 90 35 x 25 x 17.5 3 pin H 25 10 85 0.5 0.075 0.225 575.0 25 MAL219690117E3

8.4 90 35 x 25 x 20.0 3 pin H 25 10 85 0.5 0.09 0.270 690.0 25 MAL219690118E3

LOAD CURRENTS AND VOLTAGES

(F)

RECOMMENDED

CHARGE CURRENT

MAX. CHARGE

CURRENT

MAX. DISCHARGE

CURRENT

LOWEST DISCHARGE

VOLTAGE (1)

4 2 mA to 8 mA 14 mA 25 mA n x 0.8 V

15 5 mA to 20 mA 50 mA 70 mA n x 0.8 V

45 30 mA to 300 mA 0.5 A 0.5 A n x 0.8 V

90 0.3 A to 1 A 1.5 A 3 A n x 0.8 V

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

(F)

NOMINAL

CASE SIZE

Ø D x L

D x L x H

(mm)

CASE

CODE

FOR

(mm)

UCT

(°C)

24 h

(mA)

ESR

AC (1)

1 kHz

()

ESR

DC (2)

()

MIN.

STORAGE

ENERGY

(Ws)

PACKAGING

QUANTITIES ORDERING CODE

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 9Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MEASURING OF CHARACTERISTICS

CAPACITANCE (C)

Capacitance shall be measured by constant current

discharge method.

Fig. 15 - Voltage Diagram for Capacitance Measurement

Capacitance value CR is given by discharge current ID, time

t and rated voltage UR, according to the following equation:

For ID, U1, and U2 the following definitions have to be used:

Table 4

Note

•For U

2 see also Table 5

Fig. 16 - Test Circuit for Capacitance Measurement

INTERNAL RESISTANCE (RI) AT 1 kHz

Fig. 17 - Test Circuit for RI Measurement

LEAKAGE CURRENT (IL)

Leakage current shall be measured after 30 min application

of rated voltage UR:

Fig. 18 - Test Circuit for Leakage Current

DISCHARGE CURRENT AS A FUNCTION OF

RATED CAPACITANCE

PARAMETER VALUE UNIT

Rated capacitance, CR4 154590 F

Discharge current, ID4 154590mA

CRRated capacitance, in F

URRated voltage, in V

U1Starting voltage, in V

U2Ending voltage, in V

U3Voltage drop at internal resistance, in V

t1Time from start of discharge until voltage U1 is

reached, in s

t2Time from start of discharge until voltage U2 is

reached, in s

IDDischarge current, in A

CAPACITANCE

C (F) ID (A) UR (V) U1 (V) U2 (V) t1 (s) t2 (s)

4 0.004 1.4 1.3 0.7 5 > 600

4 0.004 2.8 2.7 1.9 5 > 600

4 0.004 4.2 4.0 3.1 5 > 600

4 0.004 5.6 5.4 4.4 5 > 600

4 0.004 7.0 6.7 5.6 5 > 600

4 0.004 8.4 8.1 6.9 5 > 600

15 0.015 1.4 1.3 0.7 5 > 600

15 0.015 2.8 2.7 1.9 5 > 600

15 0.015 4.2 4.0 3.1 5 > 600

15 0.015 5.6 5.4 4.4 5 > 600

15 0.015 7.0 6.7 5.6 5 > 600

15 0.015 8.4 8.1 6.9 5 > 600

t1t2

ΔU3

(s)

30 min

CRF IDA x t2s - t1s

U1V - U2V

----------------------------------------------------------

45 0.045 1.4 1.3 0.7 5 > 600

45 0.045 2.8 2.7 1.9 5 > 600

45 0.045 4.2 4.0 3.1 5 > 600

45 0.045 5.6 5.4 4.4 5 > 600

90 0.090 1.4 1.3 0.7 5 > 600

90 0.090 2.8 2.7 1.9 5 > 600

90 0.090 4.2 4.0 3.1 5 > 600

90 0.090 5.6 5.4 4.4 5 > 600

90 0.090 7.0 6.7 5.6 5 > 600

90 0.090 8.4 8.1 6.9 5 > 600

CAPACITANCE

C (F) ID (A) UR (V) U1 (V) U2 (V) t1 (s) t2 (s)

V C

Constant

current

discharger

RI UCV

10-3

----------------

1 mA

1 kHz

ILA USV

10-4

----------------

RS 100 Ω

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 10 Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 19 - Typical Leakage Current at 20 °C as a Function of Time

Table 5

DISCHARGE CHARACTERISTICS

Backup time of 196 HVC series capacitors depends on minimum memory holding voltage and discharge current (corresponding

with the current consumption of the load).

For minimum backup times of standard and vertical miniaturized series see Fig. 20 to Fig. 23 (charging time 24 h and CC-CV

charging according to table 3).

Fig. 20 - Typical Backup Time as a Function of Discharge Current Fig. 21 - Typical Backup Time as a Function of Discharge Current

VOLTAGE TO BE USED FOR SERIES CONNECTION

N CELLS IN SERIES UR (V) U1 (V) U2 (V)

1 1.4 1.3 0.7

2 2.8 2.7 1.9

3 4.2 4.0 3.1

4 5.6 5.4 4.4

5 7.0 6.7 5.6

6 8.4 8.1 6.9

100

1000

10 000

100 000

0 1020304050607080

(μA)

Time (h)

Curve 1: 90 F (1.4 V to 8.4 V)

Curve 2: 45 F (2.8 V to 5.6 V)

Curve 3: 15 F (1.4 V to 8.4 V)

Curve 4: 4 F (1.4 V to 8.4 V)

0.1 1 10 100

Discharge current (mA)

C = 4 F (1.4 V to 8.4 V)

102

Backup

time

(s)

103

104

105

102

0.1 1 10

Backup

time

(s)

Discharge current (mA)

103

104

105

106

100

C = 15 F (1.4 V to 8.4 V)

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 11 Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 22 - Typical Backup Time as a Function of Discharge Current Fig. 23 - Typical Backup Time as a Function of Discharge Current

CHARGE CHARACTERISTICS

Fig. 24 - Constant Current (CC) with V-Limit Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 4 F / 5.6 V

Fig. 25 - Constant Current (CC)-Constant Voltage (CV)

Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 4 F / 5.6 V

Fig. 26 - Constant Current (CC) with V-Limit Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 15 F / 5.6 V

Fig. 27 - Constant Current (CC)-Constant Voltage (CV)

Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 15 F / 5.6 V

Note

• Charge and discharge cycles at room temperature (RT) - maximal 50 000 cycles at room temperature allowed!

102

0.1 1 10 100

Backup

time

(s)

Discharge current (mA)

103

104

105

106

1000

C = 45 F (2.8 V to 5.6 V)

102

110100

Backup

time

(s)

Discharge current (mA)

103

104

105

106

1000 10 000

C = 90 F (1.4 V to 8.4 V)

-5

-2.5

2.5

7.5

0 5 10 15 20 25

t (min)

Voltage (V)

Current (mA)

Charge cc 4 mA/5.6 V and discharge 4 mA/3.2 V

Voltage

Current

-5

-2.5

2.5

7.5

0 1020354050607080

t (min)

Voltage (V)

Current (mA)

Charge cccv 4 mA/5.6 V + 30 min and discharge 4 mA/3.2 V

Voltage

Current

-20

-10

0 5 10 15 20 25 30 35 40 45 50

t (min)

Voltage (V)

Current (mA)

Charge cc 10 mA/5.6 V and discharge 15 mA/3.2 V

Voltage

Current

-20

-10

0 102035405060708090

t (min)

Voltage

Voltage (V)

Current (mA)

Current

Charge cccv 10 mA/5.6 V + 30 min and discharge 15 mA/3.2 V

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 12 Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 28 - Constant Current (CC) with V-Limit Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 45 F / 5.6 V

Fig. 29 - Constant Current (CC)-Constant Voltage (CV)

Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 45 F / 5.6 V

Fig. 30 - Constant Current (CC) with V-Limit Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 90 F / 5.6 V

Fig. 31 - Constant Current (CC)-Constant Voltage (CV)

Charging Method at RT

Typical Charge / Discharge Characteristics at RT: 90 F / 5.6 V

Note

• Charge and discharge cycles at room temperature (RT) - maximal 50 000 cycles at room temperature allowed!

Notes

• Capacitor is polarized, product will be damaged if reverse charged

• Voltages higher than specified need to be avoided; otherwise reduction of life time, internal gas generation or damage of HVC hybrid

capacitor will occur

• For other operating temperatures, a temperature derating factor has to be considered for correct charging voltage

• Surge voltage is only allowed a few seconds per day, but not as a charging process

(1) n... number of cells

DERATING

Working voltage at temperatures above 60 °C should be below rated voltage UR. A derating-factor of -1.5 mV/°C per cell is

recommended.

-250

-200

-150

-100

-50

100

150

200

0 2 4 6 8 10 12 14 16 18 25

t (min)

Voltage (V)

Current (mA)

Charge cc 30 mA / 5.6 V and discharge 200 mA / 3.2 V

Voltage

Current

-250

-200

-150

-100

-50

100

150

200

0 102030405060

t (min)

Voltage (V)

Current (mA)

Charge cccv 30 mA / 5.6 V + 30 min and discharge 200 mA / 3.2 V

Voltage

Current

-1500

-1000

-500

500

1000

1500

0 2 4 6 8 10 12 14 16 18 20

t (min)

Voltage (V)

Current (mA)

Charge cc 300 mA / 5.6 V and discharge 1 A / 3.2 V

Voltage

Current

-1500

-1000

-500

500

1000

1500

0 102035405060

t (min)

Voltage (V)

Current (mA)

Charge cccv 300 mA / 5.6 V + 30 min and discharge 1 A / 3.2 V

Voltage

Current

CHARGING VOLTAGE AT DIFFERENT TEMPERATURES

OPERATING TEMPERATURE RANGE 0 °C UP TO +45 °C +45 °C UP TO +60 °C +60 °C UP TO +70 °C / +85 °C

Charge voltage

1 cell UR + 0.03 V

URUR - n (1) x 0.0015 x (T[°C] - 45)

2 cells UR + 0.06 V

3 cells UR + 0.09 V

> 4 cells UR + 0.10 V

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 13 Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PRODUCT AND MOUNTING CHARACTERISTICS

Attention: parts are pre-charged at delivery - handle appropriate.

At delivery products are pre-charged and voltage over terminals is near nominal voltage. Short circuiting of product terminals

is permitted. Do not short circuit permanently. Short circuiting of charged cells may heat up the cells.

For printed circuit board mounting it has to be taken into account, that for certain form factors top and bottom of products may

not be insulated.

Capacitor disposal methods should be in accordance with local and state regulations.

Table 6.1

Notes

(1) n... number of cells

(2) RI equals ESRAC or ESRDC

Table 6.2: Stacked Through Hole configuration (STH), Surface Mount Flat configuration (SMF), and Lay Flat

configuration with Connector

Notes

• Robustness - bending limited to ± 15°, force in direction of tab / pin, no twisting allowed

• Solder bath test: max. allowed case temperature during test is e.g. 85 °C or immersion of one (1) pad only

• Wave soldering allowed

(1) RI equals ESRAC or ESRDC

TEST PROCEDURES AND REQUIREMENTS

NAME OF TEST

ENYCAP

TESTS

SUBCLAUSE

PROCEDURE

(quick reference)REQUIREMENTS (2)

Damp heat, steady state 4.12 500 h at 55 °C; RH 90 % to 95 %; no voltage applied

C/C: ± 30 %

RI  4 x spec. limit

IL  2 x spec. limit

Endurance 4.13.1

Tamb = 70 °C / 85 °C; rated voltage UR applied;

4.0 F, 15 F: 1000 h

45 F, 90 F: 2000 h

C/C: ± 30 %

RI  4 x spec. limit

IL  2 x spec. limit

Useful life 4.13.2

Tamb = 70 °C / 85 °C; rated voltage UR applied;

4.0 F, 15 F: 1000 h

45 F, 90 F: 2000 h

C/C: ± 30 %

RI  4 x spec. limit

IL  2 x spec. limit

Storage at upper category

temperature 4.17 Tamb = 70 °C / 85 °C; no voltage applied;

1000 h

C/C: ± 30 %

RI  4 x spec. limit

IL  2 x spec. limit

Self discharge 4.1.5 24 h storage at room temperature after application

of UR for 1 h Remaining voltage:  (UR x 0.9)

Characteristics at high and

low temperature 4.19

Step 1: reference measurement at 20 °C of C, RI, and IL

Step 2: measurement at -20 °C

Step 3: measurement at +20 °C

Step 4: measurement at +70 °C

Step 5: measurement at +20 °C

C/C: ± 30 % of +20 °C value

RI  5 x the +20 °C value

IL  4 x the +20 °C value

Surge voltage 4.15 Max. 30 s at room temperature

US = n (1) x 1.6 V

No change of parameter!

After surge voltage, discharge

product below rated voltage

TEST PROCEDURES AND REQUIREMENTS

NAME OF TEST

ENYCAP

TESTS

SUBCLAUSE

PROCEDURE

(quick reference)REQUIREMENTS (1)

Robustness of terminations 4.4

Tensile strength; application of load force in pin / tab

direction for 10 s:

10 N: for product size Ø  8 mm

5 N: for product size Ø < 8 mm

No breaks

Resistance to soldering heat 4.5 260 °C; 5 s C/C: ± 10 %

RI and IL  spec. limit

Solderability 4.6 Solder bath; 236 °C; 2 s; one pin immersed  75 % tinning

Vibration 4.8 10 Hz to 55 Hz; 1.5 mm; 3 directions; 

2 h per direction

C/C: ± 10 %

RI and IL  spec. limit

196 HVC ENYCAP™

www.vishay.com Vishay BCcomponents

Revision: 23-Jul-2018 14 Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SOLDERING

As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering

connections. However, the maximum specified soldering time and case temperature should never be exceeded.

EVALUATION KIT

Evaluation kits are available under ordering code: MAL219699001E3. The engineering kit includes a charge and discharge demo

board with different 196 HVC capacitor samples.

For further details, please contact hybridstorage@vishay.com.



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

MAL219691214E3 MAL219691124E3 MAL219691226E3 MAL219691105E3 MAL219691213E3 MAL219691223E3

MAL219691215E3 MAL219690103E3 MAL219691263E3 MAL219691201E3 MAL219691115E3 MAL219691202E3

MAL219691152E3 MAL219691102E3 MAL219691216E3 MAL219691116E3 MAL219691266E3 MAL219691104E3

MAL219691204E3 MAL219691154E3 MAL219691206E3 MAL219691212E3 MAL219691112E3 MAL219691222E3

MAL219691114E3 MAL219691123E3 MAL219691103E3 MAL219691265E3 MAL219691254E3 MAL219691153E3

MAL219691225E3 MAL219690102E3 MAL219691252E3 MAL219691211E3 MAL219691205E3 MAL219691203E3

MAL219691113E3 MAL219691101E3 MAL219691122E3 MAL219691126E3 MAL219691141E3 MAL219691224E3

MAL219691121E3 MAL219691106E3 MAL219691125E3 MAL219691253E3 MAL219690101E3 MAL219691261E3

MAL219691241E3 MAL219691264E3 MAL219691231E3 MAL219691131E3 MAL219691262E3 MAL219691111E3

MAL219691221E3 MAL219690201E3 MAL219690202E3 MAL219690112E3 MAL219690111E3 MAL219690113E3

MAL219690211E3 MAL219690106E3 MAL219695451E3 MAL219695602E3 MAL219695301E3 MAL219695302E3

MAL219695305E3 MAL219695605E3 MAL219695455E3 MAL219695452E3 MAL219695601E3 MAL219690213E3

MAL219690116E3 MAL219690107E3 MAL219690118E3 MAL219690212E3 MAL219690117E3 MAL219690108E3

MAL219690203E3 MAL219690998E3