© Semiconductor Components Industries, LLC, 2014
July, 2018 − Rev. 2 1Publication Order Number:
NTMFS4C01N/D
NTMFS4C01N
Power MOSFET
30 V, 0.9 mW, 303 A, Single N−Channel,
SO−8FL
Features
•Small Footprint (5x6 mm) for Compact Design
•Low RDS(on) to Minimize Conduction Losses
•Low QG and Capacitance to Minimize Driver Losses
•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter Symbol Value Unit
Drain−to−Source Voltage VDSS 30 V
Gate−to−Source Voltage VGS "20 V
Continuous Drain Cur-
rent RqJC (Notes 1, 3) Steady
State
TC = 25°C ID303 A
Power Dissipation
RqJC (Notes 1, 3) TC = 25°C PD134 W
Continuous Drain
Current RqJA
(Notes 1, 2, 3) Steady
State
TA = 25°C ID47 A
Power Dissipation
RqJA (Notes 1, 2, 3) TA = 25°C PD3.2 W
Pulsed Drain Current TA = 25°C, tp = 10 msIDM 552 A
Operating Junction and Storage Temperature TJ, Tstg −55 to
150 °C
Source Current (Body Diode) IS110 A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 35 A) EAS 862 mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s) TL260 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be af fected.
THERMAL RESISTANCE MAXIMUM RATINGS (Note 1)
Parameter Symbol Value Unit
Junction−to−Case − Steady State RqJC 0.93 °C/W
Junction−to−Ambient − Steady State (Note 2) RqJA 39
1. The e ntire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
SO−8 FLAT LEAD
CASE 488AA
STYLE 1
MARKING
DIAGRAM
www.onsemi.com
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
4C01N
AYWZZ
1
V(BR)DSS RDS(ON) MAX ID MAX
30 V 0.9 mW @ 10 V 303 A
1.2 mW @ 4.5 V
G (4)
S (1,2,3)
N−CHANNEL MOSFET
D (5)
Device Package Shipping†
ORDERING INFORMATION
NTMFS4C01NT1G SO−8FL
(Pb−Free) 1500 /
Tape & Reel
NTMFS4C01NT3G SO−8FL
(Pb−Free) 5000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer t o our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
S
S
S
G
D
D
D
D
NTMFS4C01N
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Symbol Test Condition Min Typ Max Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA30 V
Drain−to−Source Breakdown Voltage
Temperature Coefficient V(BR)DSS/
TJ16.3 mV/°C
Zero Gate Voltage Drain Current IDSS VGS = 0 V,
VDS = 24 V TJ = 25 °C 1 mA
TJ = 125°C 100
Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = 20 V 100 nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250 mA1.3 2.2 V
Negative Threshold Temperature Coefficient VGS(TH)/TJ5.8 mV/°C
Drain−to−Source On Resistance RDS(on) VGS = 10 V ID = 30 A 0.71 0.9 mW
VGS = 4.5 V ID = 30 A 0.94 1.2
Forward Transconductance gFS VDS = 3 V ID = 30 A 183 S
Gate Resistance RGTA = 25 °C 1.0 W
CHARGES AND CAPACITANCES
Input Capacitance CISS
VGS = 0 V, f = 1 MHz, VDS = 15 V
10144
pF
Output Capacitance COSS 5073
Reverse Transfer Capacitance CRSS 148
Total Gate Charge QG(TOT)
VGS = 4.5 V, VDS = 15 V; ID = 30 A
63
nC
Threshold Gate Charge QG(TH) 18
Gate−to−Source Charge QGS 29
Gate−to−Drain Charge QGD 13
Total Gate Charge QG(TOT) VGS = 10 V, VDS = 15 V,
ID = 30 A 139 nC
SWITCHING CHARACTERISTICS (Note 5)
T urn−On Delay Time td(ON)
VGS = 4.5 V, VDS = 15 V, ID = 15 A,
RG = 3.0 W
29
ns
Rise Time tr68
T urn−Off Delay Time td(OFF) 53
Fall Time tf36
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage VSD VGS = 0 V,
IS = 10 A TJ = 25°C 0.73 1.1 V
TJ = 125°C 0.55
Reverse Recovery Time tRR
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 30 A
87
ns
Charge Time ta43
Discharge Time tb44
Reverse Recovery Charge QRR 147 nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
NTMFS4C01N
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics
VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS, GATE VOLTAGE (V) ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
2.8 V
3.0 V
3.2 V
3.4 V
3.6 V
VGS = 2.6 V
VDS = 3 V
TJ = 25°C
TJ = −55°C
TJ = 150°C
ID = 30 A
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
TJ = 25°C
VGS = 10 V
VGS = 4.5 V
TJ = 25°C
0
50
100
150
200
250
300
350
400
0.0 0.5 1.0 1.5 2.0 2.5 3.0
4.5 V
10 V
0
50
100
150
200
250
300
350
400
1.5 2 2.5 3 3.5 4
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
345678910 0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0 50 100 150 200 250 300 350 400
Figure 5. On−Resistance Variation with
Temperature
TJ, JUNCTION TEMPERATURE (°C)
1251007550250−25−50
0.6
0.8
1.4
1.8
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE (W)
1.0
1.2
1.6 VGS = 10 V
ID = 30 A
150
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
IDSS, LEAKAGE (nA)
TJ = 85°C
TJ = 125°C
TJ = 100°C
10
100
1000
10000
100000
0 5 10 15 20 25 30
NTMFS4C01N
www.onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 7. Capacitance Variation
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
10.1
10
100
1k
10k
100k
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
QG, TOTAL GATE CHARGE (nC)
RG, GATE RESISTANCE (W)
140200
0
1
6
12
1001010.1
10
1000
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
t, TIME (ns)
10 100
100
QT
VDS = 15 V
ID = 30 A
TJ = 25°C
QGS QGD
VGS = 0 V
TJ = 25°C
f = 1 MHz CRSS
COSS
CISS
40 60 80 100 120
2
3
4
5
11
7
8
9
10 VDS VGS
0
6
3
18
9
12
15
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
VGS = 4.5 V
VDD = 15 V
ID = 15 A
td(off)
td(on)
trtf
Figure 10. Diode Forward Voltage vs. Current
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
1.00.80.60.40.3
0.1
1
10
100
1000
IS, SOURCE CURRENT (A)
0.5 0.7 0.9
TJ = 25°CTJ = −55°C
TJ = 150°C
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
0 V < VGS < 10 V
SINGLE PULSE
TC = 25°C
1 ms
10 ms
DC
100 ms
1 10 1000.1
1
10
100
1000
0.01
0.1
0.01
NTMFS4C01N
www.onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 12. Thermal Impedance (Junction−to−Ambient)
t, TIME (s)
0.010.0010.00010.000010.000001
0.001
0.1
1
10
100
R(t) (°C/W)
0.1 1 10 100 1000
Single Pulse
Duty Cycle = 0.5
0.2
0.1
0.05
0.02
0.01
0.01
RqJA = Steady State = 39°C/W
PCB Cu Area = 650 mm2
PCB Cu Thk = 2 oz
Figure 13. Avalanche Characteristics
TIME IN AVALANCHE (s) 1.00E−021.00E−03
IPEAK, (A)
1.00E−04
1000
TJ(initial) = 25°C
TJ(initial) = 100°C
100
10
1
NTMFS4C01N
www.onsemi.com
6
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE N
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
M3.00 3.40
q0 −−−
_
3.80
12
_
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.575
K1.20 1.35
L0.51 0.575
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 cL
DETAIL A
A1
c
4 X
C
SEATING
PLANE
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
M
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
4.530
1.530
4.5600.495
3.200
1.330
0.965
2X
2X
4X
4X
PIN 5
(EXPOSED PAD)
5.00 5.30
6.00 6.30
PITCH
DIMENSIONS: MILLIMETERS
1
RECOMMENDED
e2X
0.475
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
NTMFS4C01N/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
◊
