Product Specification PE42742 75 Terminated, 5 - 2200 MHz SPDT CATV UltraCMOSTM Switch Featuring Unpowered Operation Product Description The PE42742 is an SPDT UltraCMOSTM Switch designed for Broadband applications such as CATV, DTV, Multi-Tuner DVR (Digital Video Recorder), Set-top Box, PCTV and Game Boxes. It meets FCC 15.115 spec of 80 dB isolation @ 216 MHz and offers high isolation and low insertion loss in both a powered and a unique unpowered default state. The PE42742 covers a broad frequency range from 5 MHz to beyond 2200 MHz with a single positive supply and CMOS control. It provides a smaller, cost effective, more reliable and manufacturable alternative to mechanical relays in settop box applications. Features * Meets FCC 15.115 spec of 80 dB isolation @ 216 MHz * Unpowered operational state * 3500 V HBM ESD tolerance, All Pins * CTB performance of 90 dBc * High isolation: 63 dB at 1000 MHz * Low insertion loss: typically 0.5 dB at 5 MHz, 0.8 dB at 1000 MHz The PE42742 is manufactured on Peregrine's UltraCMOSTM process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram * CMOS single-pin control with logic select * Single +3 volt supply operation * Low current consumption: 8 A Figure 2. Package Type 4x4 mm 20-lead QFN RFC RF2 RF1 ESD ESD 75 CMOS Control Driver C1 75 C2 Document No. 70-0203-06 www.psemi.com (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 11 PE42742 Product Specification Table 1. Electrical Specifications @ +25 C, VDD = +3 V (ZS = ZL = 75 ) Parameter Condition Minimum Operating Frequency Typical 5 Maximum Units 2200 MHz RF1-RFC Insertion Loss 220 MHz 550 MHz 810 MHz 2200 MHz 0.45 0.55 0.7 1.7 0.55 0.65 0.8 1.8 dB dB dB dB RF2-RFC Insertion Loss 220 MHz 550 MHz 810 MHz 2200 MHz 0.7 0.8 0.9 1.8 0.8 0.9 1 1.9 dB dB dB dB Isolation RF1 to RF2 (RFC-RF1 ON) 220 MHz 550 MHz 810 MHz 2200 MHz 81 77 71.5 50 94 82 76 53.6 dB dB dB dB Isolation RF1 to RF2 (RFC-RF2 ON) 220 MHz 550 MHz 810 MHz 2200 MHz 81 75 70.5 50 92 79 75 53 dB dB dB dB Isolation RF1 to RFC (RFC-RF2 ON) 220 MHz 550 MHz 810 MHz 2200 MHz 71 64 62 52 74 66 64 57 dB dB dB dB Isolation RF2 to RFC (RFC-RF1 ON) 220 MHz 550 MHz 810 MHz 2200 MHz 70.5 64 61.5 51 73 66 63 55 dB dB dB dB 5 MHz - 1000 MHz 90/90 dBm 5 MHz - 1000 MHz 53/53 dBm 32/26.5 dBm -90 / -77 dBc 50 % CTRL to 10 / 90 RF 3 s 5 MHz - 1000MHz 20 mVpp IP2 RF1/RF22 IIP3 RF1/RF22 2 Input 1 dB Compression RF1/RF2 CTB / CSO (Powered/Unpowered) Switching time 3 Video Feedthrough 1000 MHz 30/24.5 77 & 110 channels; Power Out = 44 dBmV Table 2. Electrical Characterization (Unpowered Operation)5 Parameter Condition Operating Frequency1 Isolation RF1 to RF24 Notes: Minimum Typical 5 220 MHz 550 MHz 810 MHz 2200 MHz 81 77 70.5 49 90.5 81.5 77 52.5 Maximum Units 2200 MHz - dB dB dB dB 1. Device linearity will begin to degrade with input signals below 5 MHz. 2. Measured in a 50 system. 3. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth 4. Minimum per FCC 15.115 spec 5. See Figure 9 for Power-Off insertion loss of RFC-RF1 (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 11 Document No. 70-0203-06 UltraCMOSTM RFIC Solutions PE42742 Product Specification Table 5. Operating Conditions @ 25 C Parameter 16 C2 17 C1 GND 18 19 GND 20 VDD Figure 3. Pin Configuration (Top View) Min Typ Max Unit 2.7 3.0 3.3 V VDD Power Supply 15 GND IDD Power Supply Current (VDD = 3 V, VCNTL = 3 V) 2 14 GND Control Voltage High 0.7 x VDD VDD V RF1 3 13 Control Voltage Low 0 0.3 x VDD V GND 4 GND 5 GND 1 GND GND 75 RF2 12 GND 75 Table 6. Absolute Maximum Ratings 11 GND 10 VDD GND 9 GND 8 RFC 7 GND GND 6 Symbol VI Table 3. Pin Descriptions No. 1, 2, 4-7, 9-12, 14, 15, 18, 19 Name GND Description RF11 RF I/O 8 RFC1 RF Common Parameter/Condition Power supply voltage Voltage on any DC input RF I/O 16 C22 Control 2 (or logic select) 17 C12 Control 1 (or logic select) 20 VDD Supply Pad GND RF Ground Pad Notes: 1. RF pins 3, 8, and 13 must be at 0 VDC. The RF pins do not require DC blocking capacitors for proper operation if the 0 V DC requirement is met. 2. Pins 16 and 17 can be set for single pin or complementary pin control. Table 4. Moisture Sensitivity Level and Fabrication Plant Moisture Sensitivity Level Fabrication Plant PE42742MLIBB MSL1 2 PE42742MLIBB-Z MSL1 2 PE42742MLIBA MSL1 2 PE42742MLIBA-Z MSL1 2 42742-51 MSL1 1 42742-52 MSL1 1 Document No. 70-0203-06 www.psemi.com 4.0 V -0.3 VDD + 0.3 V 24/33 dBm -65 +150 C TOP Operating temperature -40 +85 C 3 2000 3 HBM ESD Voltage Digital Pins 500 MM ESD Voltage all pins 100 VESD (note 2) Notes: HBM ESD Voltage RF Pins 3500 HBM3 ESD Voltage Digital Pins 3500 MM ESD Voltage all pins 150 V 1. Fabrication plant 1 parts, see Table 4. Please contact factory for fabrication plant details. 2. Fabrication plan 2 parts, see Table 4. Please contact factory for fabrication plant details. 3. ML_STD 883 Method 3015.7 Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Electrostatic Discharge (ESD) Precautions The PE42742 in the 20-lead QFN package is rated MSL1. Please note the difference in fabrication plants for the following ordering codes. Ordering Code -0.3 Storage temperature HBM ESD Voltage RF Pins RF2 Unit TST VESD (note 1) 13 Max PRF 3 1 Min RF power on RFC, RF1, RF2 Terminated/Through RF Ground 3 A 8 When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up. Switching Frequency The PE42742 has a maximum 25 kHz switching rate. (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 11 PE42742 Product Specification Typical Applications Table 7. Truth Table VDD C1 (pin 17) C2 (pin 16) RFC - RF1 RFC - RF2 OFF Low Low ON OFF ON Low Low ON OFF ON Low High OFF ON ON High Low OFF ON ON High High ON OFF The PE42742 provides the high isolation required by FCC part 15.115 regulation between the television antenna and the cable plant. The advantage of the PE42742 is that device isolation / thru performance is maintained when power is removed. This unique feature makes the PE42742 ideal for set-top box and VCR applications. The PE42742 supports signal flow from RFC to RF1 and RF2 termination in the unpowered state; similar to the powered state with C1=C2 (both high or low). Note: A versatile logic table has been established to allow either C1 or C2 act as a single pin control and in either polarity. Figure 4. Typical Application (1 of 4) Antenna Input 80dB 54 - 216M Hz 60dB 216 - 550M Hz 55dB 550 - 806M Hz PE42742 DTV-Tuner SPDT CATV Input Figure 5. Typical Application (2 of 4) TV Set / Cable Set-top Box PE42742 SPDT Tuner CATV Input 75 OFF - Terminated Figure 6. Typical Application (3 of 4) Dual Tuner DTV / DVR / Set-top Box Antenna Input Power Splitter PE42742 SPDT DTV Tuner Power Splitter PE42742 SPDT DTV-Tuner 80dB 54 - 216MHz 60dB 216 - 550MHz 55dB 550 - 806MHz CATV Input Figure 7. Typical Application (4 of 4) PVR/VCR/Game Box Antenna/Cable Input PE42742 RF Splitter SPDT Television Tuner/ Modulator OFF - Pass Through (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 11 Document No. 70-0203-06 UltraCMOSTM RFIC Solutions PE42742 Product Specification Typical Performance Data @ 25C, 75 Figure 8. Insertion Loss - Power On Figure 9. Insertion Loss - Power Off Figure 10. Isolation - Power On Figure 11. Isolation - Power Off Document No. 70-0203-06 www.psemi.com (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 11 PE42742 Product Specification Typical Performance Data @ 25C, 75 Figure 12. Isolation: RF2 - Power On Figure 13. Return Loss: RF1 Figure 14. Return Loss: RF2 Figure 15. Return Loss: RFC (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 11 Document No. 70-0203-06 UltraCMOSTM RFIC Solutions PE42742 Product Specification Typical Performance Data @ 25C, 75 Figure 17. P_1dB Compression: RFC-RF1/RF2 70 40 60 35 30 50 P_1dB (dBm) Input IP3 (dBm) Figure 16. Input IP3: RFC-RF1/RF2 40 30 20 25 20 15 10 RF1 10 RF1 5 RF2 RF2 0 0 0 500 1000 1500 Frquency (MHz) Document No. 70-0203-06 www.psemi.com 2000 2500 0 500 1000 1500 2000 2500 Frequency (dBm ) (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 11 PE42742 Product Specification Evaluation Kit The SPDT Switch Evaluation Kit facilitates customer evaluation of the PE42742 SPDT switch. The RF common port is connected through a 75 transmission line to J2. Ports 1 and 2 are connected through 75 transmission lines to J1 and J3. A through line connects F connectors J4 and J5. This transmission line can be used to estimate the PCB loss over the environmental conditions. J6 provides DC and digital inputs to the device. Figure 18. Evaluation Board Layouts Peregrine Specification 101/0269 The board is composed of a two metal layer FR4 material with a total thickness of 0.032". The transmission lines are hybrid microstrip/coplanar waveguide with ground plane (28 mil core, 12 mil width, 12 mil gap). The provided jumpers short the control pins to ground for logic low. With the jumper removed the control input rises to VDD for logic high through the 1 M pull up resistor. These resistors will draw several microamps from VDD. They are not required for normal operation. Figure 19. Evaluation Board Peregrine Specification 102/0352 (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 11 Document No. 70-0203-06 UltraCMOSTM RFIC Solutions PE42742 Product Specification Figure 20. Package Drawing 4x4 mm 20-lead QFN, BOM 19/0106 Figure 21. Marking Specification 42742 YYWW ZZZZZ Document No. 70-0203-06 www.psemi.com YYWW = Date Code (Year, Work Week) ZZZZZ = Last five digits of PSC Lot Number (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 11 PE42742 Product Specification Figure 22. Tape and Reel Drawing Tape Feed Direction Pin 1 A0 = 4.35 B0 = 4.35 K0 = 1.1 Top of Device Device Orientation in Tape Table 8. Ordering Information Order Code Part Marking PE42742MLIBB (note 1) 42742 PE42742MLIBB-Z (note 1) 42742 PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R EK42742-03 (note 1) PE42742-EK PE42742-20 QFN 4x4mm-EK Evaluation Kit 1 / Box PE42742MLIBA (note 2) 42742 PE42742MLIBA-Z (note 2) 42742 42742-51 (note 2) 42742 42742-52 (note 2) 42742 Notes: Description Package PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN PE42742G-20 QFN 4x4mm-3000C Shipping Method Cut tape or loose Cut tape or loose Green 20-lead 4x4mm QFN 3000 units / T&R PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN Cut tape or loose PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R 1. Current manufacturing flow 2. Legacy manufacturing flow, not for new designs For questions, please contact factory for fabrication plant details. (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 10 of 11 Document No. 70-0203-06 UltraCMOSTM RFIC Solutions PE42742 Product Specification Sales Offices The Americas Peregrine Semiconductor Corporation Peregrine Semiconductor, Asia Pacific (APAC) 9380 Carroll Park Drive San Diego, CA 92121 Tel: 858-731-9400 Fax: 858-731-9499 Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Europe Peregrine Semiconductor Europe Batiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France Tel: +33-1-4741-9173 Fax : +33-1-4741-9173 High-Reliability and Defense Products Americas San Diego, CA, USA Phone: 858-731-9475 Fax: 848-731-9499 Europe/Asia-Pacific Parc Cezanne 1 380 Avenue Archimede, Parc de la Duranne 13857 Aix-En-Provence Cedex 3, France Phone: +33-4-4239-3361 Fax: +33-4-4239-7227 Peregrine Semiconductor, Korea #B-2607, Kolon Tripolis, 210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-943 South Korea Tel: +82-31-728-3939 Fax: +82-31-728-3940 Peregrine Semiconductor K.K., Japan Teikoku Hotel Tower 10B-6 1-1-1 Uchisaiwai-cho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). Document No. 70-0203-06 www.psemi.com The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. (c)2006-2010 Peregrine Semiconductor Corp. All rights reserved. Page 11 of 11