Page 1 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
4x4 mm 20-lead QFN
The PE42742 is an SPDT UltraCMOS™ Switch designed for
Broadband applications such as CATV, DTV, Multi-Tuner
DVR (Digital Video Recorder), Set-top Box, PCTV and Game
Boxes. It meets FCC 15.115 spec of 80 dB isolation @ 216
MHz and offers high isolation and low insertion loss in both a
powered and a unique unpowered default state. The
PE42742 covers a broad frequency range from 5 MHz to
beyond 2200 MHz with a single positive supply and CMOS
control. It provides a smaller, cost effective, more reliable
and manufacturable alternative to mechanical relays in set-
top box applications.
The PE42742 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
Product Specification
Product Description
Figure 1. Functional Diagram
PE42742
Features
Meets FCC 15.115 spec of 80 dB
isolation @ 216 MHz
Unpowered operational state
3500 V HBM ESD tolerance, All Pins
CTB performance of 90 dBc
High isolation: 63 dB at 1000 MHz
Low insertion loss: typically 0.5 dB at
5 MHz, 0.8 dB at 1000 MHz
CMOS single-pin control with logic
select
Single +3 volt supply operation
Low current consumption: 8 µA
75 Terminated, 5 - 2200 MHz SPDT
CATV UltraCMOS™ Switch
Featuring Unpowered Operation
Figure 2. Package Type
RF1 RF2
75
75CMOS
Control
Driver
ESD ESD
RFC
C1 C2
Product Specification
PE42742
Page 2 of 11
©2006-2010 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-06 UltraCMOS™ RFIC Solutions
Table 1. Electrical Specifications @ +25 °C, V
DD
= +3 V (Z
S
= Z
L
= 75 )
Notes: 1. Device linearity will begin to degrade with input signals below 5 MHz.
2. Measured in a 50 Ω system.
3. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth
4. Minimum per FCC 15.115 spec
5. See Figure 9 for Power-Off insertion loss of RFC-RF1
Table 2. Electrical Characterization (Unpowered Operation)
5
Parameter Condition Minimum Typical Maximum Units
Operating Frequency 5 2200 MHz
RF1-RFC Insertion Loss
220 MHz 0.45 0.55 dB
550 MHz 0.55 0.65 dB
810 MHz 0.7 0.8 dB
2200 MHz 1.7 1.8 dB
RF2-RFC Insertion Loss
220 MHz 0.7 0.8 dB
550 MHz 0.8 0.9 dB
810 MHz 0.9 1 dB
2200 MHz 1.8 1.9 dB
Isolation RF1 to RF2 (RFC-RF1 ON)
220 MHz 81 94 dB
550 MHz 77 82 dB
810 MHz 71.5 76 dB
2200 MHz 50 53.6 dB
Isolation RF1 to RF2 (RFC-RF2 ON)
220 MHz 81 92 dB
550 MHz 75 79 dB
810 MHz 70.5 75 dB
2200 MHz 50 53 dB
Isolation RF1 to RFC (RFC-RF2 ON)
220 MHz 71 74 dB
550 MHz 64 66 dB
810 MHz 62 64 dB
2200 MHz 52 57 dB
Isolation RF2 to RFC (RFC-RF1 ON)
220 MHz 70.5 73 dB
550 MHz 64 66 dB
810 MHz 61.5 63 dB
2200 MHz 51 55 dB
IP2 RF1/RF2
2
5 MHz – 1000 MHz 90/90 dBm
IIP3 RF1/RF2
2
5 MHz – 1000 MHz 53/53 dBm
Input 1 dB Compression RF1/RF2
2
1000 MHz 30/24.5 32/26.5 dBm
Switching time 50 % CTRL to 10 / 90 RF 3 µs
Video Feedthrough
3
5 MHz – 1000MHz 20 mVpp
CTB / CSO
(Powered/Unpowered)
77 & 110 channels;
Power Out = 44 dBmV
-90 / -77
dBc
Parameter Condition Minimum Typical Maximum Units
Operating Frequency
1
5 2200 MHz
Isolation RF1 to RF2
4
220 MHz
550 MHz
810 MHz
2200 MHz
81
77
70.5
49
90.5
81.5
77
52.5
-
-
-
-
dB
dB
dB
dB
Product Specification
PE42742
Page 3 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
No. Name Description
1, 2, 4-7, 9-12,
14, 15, 18, 19
GND
RF Ground
3
RF1
1
RF I/O
8
RFC
1
RF Common
13
RF2
1
RF I/O
16
C2
2
Control 2 (or logic select)
17
C1
2
Control 1 (or logic select)
20
VDD
Supply
Pad
GND
RF Ground Pad
Table 3. Pin Descriptions
Table 6. Absolute Maximum Ratings
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe the
same precautions that you would use with other ESD-
sensitive devices. Although this device contains
circuitry to protect it from damage due to ESD,
precautions should be taken to avoid exceeding the
rating specified.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
Table 5. Operating Conditions @ 25 °C
Notes: 1. RF pins 3, 8, and 13 must be at 0 VDC. The RF pins do
not require DC blocking capacitors for proper operation if the
0 V DC requirement is met.
2. Pins 16 and 17 can be set for single pin or complementary
pin control.
Switching Frequency
The PE42742 has a maximum 25 kHz switching rate.
Figure 3. Pin Configuration (Top View)
Symbol Parameter/Condition Min Max Unit
V
DD
Power supply voltage
-0.3
4.0
V
V
I
Voltage on any DC input
-0.3
V
DD
+
0.3
V
P
RF
RF power on RFC, RF1, RF2
Terminated/Through
24/33
dBm
T
ST
Storage temperature
-65
+150
°C
T
OP
Operating temperature
-40
+85
°C
V
ESD
(note 1)
HBM
3
ESD Voltage RF Pins
2000
V
HBM
3
ESD Voltage Digital Pins 500
V
ESD
(note 2)
HBM
3
ESD Voltage
RF Pins
3500
HBM
3
ESD Voltage Digital Pins 3500
MM ESD Voltage all pins 100
MM ESD Voltage all pins 150
Parameter Min Typ Max Unit
V
DD
Power Supply
2.7
3.0
3.3
V
I
DD
Power Supply Current
(V
DD
= 3 V, V
CNTL
= 3 V)
8
µA
Control Voltage High
0.7 x V
DD
V
DD
V
Control Voltage Low
0
0.3 x V
DD
V
Exceeding absolute maximum ratings may cause
permanent damage. Operation should be restricted to
the limits in the Operating Ranges table. Operation
between operating range maximum and absolute
maximum for extended periods may reduce reliability.
GND 15
14
13
12
11
3
4
5
2
1
17
16
18
19
20
9
10
8
7
6
C2
GND
GND
GND
GND
GND
RFC
VDD
C1
GND
GND
GND
GND
RF2
GND
GND
GND
RF1
GND
GND
75 75
The PE42742 in the 20-lead QFN package is rated
MSL1. Please note the difference in fabrication plants
for the following ordering codes.
Notes: 1. Fabrication plant 1 parts, see Table 4. Please contact
factory for fabrication plant details.
2. Fabrication plan 2 parts, see Table 4. Please contact
factory for fabrication plant details.
3. ML_STD 883 Method 3015.7
Ordering Code Moisture Sensitivity Level Fabrication
Plant
PE42742MLIBB MSL1 2
PE42742MLIBB-Z MSL1 2
PE42742MLIBA MSL1 2
PE42742MLIBA-Z MSL1 2
42742-51 MSL1 1
42742-52 MSL1 1
Table 4. Moisture Sensitivity Level
and Fabrication Plant
Product Specification
PE42742
Page 4 of 11
©2006-2010 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-06 UltraCMOS™ RFIC Solutions
Figure 4. Typical Application (1 of 4)
Table 7. Truth Table
V
DD
C1 (pin 17)
C2 (pin 16)
RFC – RF1
RFC – RF2
OFF
Low
Low
ON
OFF
ON
Low
Low
ON
OFF
ON
Low
High
OFF
ON
ON
High
Low
OFF
ON
ON
High
High
ON
OFF
Note: A versatile logic table has been established to allow either C1 or C2
act as a single pin control and in either polarity.
Typical Applications
The PE42742 provides the high isolation required
by FCC part 15.115 regulation between the
television antenna and the cable plant. The
advantage of the PE42742 is that device
isolation / thru performance is maintained when
power is removed. This unique feature makes the
PE42742 ideal for set-top box and VCR
applications. The PE42742 supports signal flow
from RFC to RF1 and RF2 termination in the
unpowered state; similar to the powered state with
C1=C2 (both high or low).
DTV-Tuner
PE42742
SPDT
DTV Tuner
Antenna Input
CATV Input
80dB 54 – 216MHz
60dB 216 – 550MHz
55dB 550 – 806MHz
Power
Splitter
Power
Splitter
PE42742
SPDT
Dual Tuner DTV / DVR / Set-top Box
Television
RF
Splitter
Antenna/Cable
Input
PVR/VCR/Game Box
PE42742
SPDT
Tuner/
Modulator
OFF – Pass Through
Tuner
CATV Input
OFF – Terminated
TV Set / Cable Set-top Box
75
PE42742 SPDT
Figure 5. Typical Application (2 of 4)
Figure 7. Typical Application (4 of 4)
Figure 6. Typical Application (3 of 4)
DTV-Tuner
PE42742
SPDT
Antenna Input
CATV Input
80dB 54 – 216MHz
60dB 216 – 550MHz
55dB 550 – 806MHz
Product Specification
PE42742
Page 5 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
Typical Performance Data @ 25°C, 75
Figure 8. Insertion Loss – Power On Figure 9. Insertion Loss – Power Off
Figure 10. Isolation - Power On Figure 11. Isolation - Power Off
Product Specification
PE42742
Page 6 of 11
©2006-2010 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-06 UltraCMOS™ RFIC Solutions
Typical Performance Data @ 25°C, 75
Figure 12. Isolation: RF2 Power On Figure 13. Return Loss: RF1
Figure 14. Return Loss: RF2 Figure 15. Return Loss: RFC
Product Specification
PE42742
Page 7 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
Typical Performance Data @ 25°C, 75
Figure 16. Input IP3: RFC-RF1/RF2 Figure 17. P_1dB Compression: RFC-RF1/RF2
0
10
20
30
40
50
60
70
0 500 1000 1500 2000 2500
Frquency (MHz)
Input IP3 (dBm)
RF1
RF2
0
5
10
15
20
25
30
35
40
0 500 1000 1500 2000 2500
Frequency (dBm )
P_1dB (dBm)
RF1
RF2
Product Specification
PE42742
Page 8 of 11
©2006-2010 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-06 UltraCMOS™ RFIC Solutions
Evaluation Kit
The SPDT Switch Evaluation Kit facilitates
customer evaluation of the PE42742 SPDT
switch. The RF common port is connected
through a 75 transmission line to J2. Ports 1
and 2 are connected through 75 transmission
lines to J1 and J3. A through line connects F
connectors J4 and J5. This transmission line can
be used to estimate the PCB loss over the
environmental conditions. J6 provides DC and
digital inputs to the device.
The board is composed of a two metal layer FR4
material with a total thickness of 0.032”. The
transmission lines are hybrid microstrip/coplanar
waveguide with ground plane (28 mil core, 12 mil
width, 12 mil gap).
The provided jumpers short the control pins to
ground for logic low. With the jumper removed the
control input rises to VDD for logic high through the
1 M pull up resistor. These resistors will draw
several microamps from VDD. They are not
required for normal operation.
Figure 18. Evaluation Board Layouts
Figure 19. Evaluation Board
Peregrine Specification 102/0352
Peregrine Specification 101/0269
Product Specification
PE42742
Page 9 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
Figure 20. Package Drawing
4x4 mm 20-lead QFN, BOM 19/0106
Figure 21. Marking Specification
42742
YYWW
ZZZZZ
YYWW = Date Code (Year, Work Week)
ZZZZZ = Last five digits of PSC Lot Number
Product Specification
PE42742
Page 10 of 11
©2006-2010 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-06 UltraCMOS™ RFIC Solutions
Table 8. Ordering Information
Order Code Part Marking Description Package Shipping Method
PE42742MLIBB
(note 1)
42742 PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN Cut tape or loose
PE42742MLIBB-Z
(note 1)
42742 PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R
EK42742-03
(note 1)
PE42742-EK PE42742-20 QFN 4x4mm-EK Evaluation Kit 1 / Box
PE42742MLIBA
(note 2)
42742 PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN Cut tape or loose
PE42742MLIBA-Z
(note 2)
42742 PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R
42742-51
(note 2)
42742 PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN Cut tape or loose
42742-52
(note 2)
42742 PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R
Figure 22. Tape and Reel Drawing
Device Orientation in Tape
Top of
Device
Pin 1
Tape Feed Direction
A
0
= 4.35
B
0
= 4.35
K
0
= 1.1
Notes: 1. Current manufacturing flow
2. Legacy manufacturing flow, not for new designs
For questions, please contact factory for fabrication plant details.
Product Specification
PE42742
Page 11 of 11
Document No. 70-0203-06 www.psemi.com ©2006-2010 Peregrine Semiconductor Corp. All rights reserved.
Sales Offices
The Americas
Peregrine Semiconductor Corporation
9380 Carroll Park Drive
San Diego, CA 92121
Tel: 858-731-9400
Fax: 858-731-9499
Europe
Peregrine Semiconductor Europe
Bâtiment Maine
13-15 rue des Quatre Vents
F-92380 Garches, France
Tel: +33-1-4741-9173
Fax : +33-1-4741-9173
For a list of representatives in your area, please refer to our
Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
Preliminary Specification
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a CNF
(Customer Notification Form).
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks
of Peregrine Semiconductor Corp.
High-Reliability and Defense Products
Americas
San Diego, CA, USA
Phone: 858-731-9475
Fax: 848-731-9499
Europe/Asia-Pacific
Parc Cezanne 1
380 Avenue Archimède, Parc de la Duranne
13857 Aix-En-Provence Cedex 3, France
Phone: +33-4-4239-3361
Fax: +33-4-4239-7227
Peregrine Semiconductor, Asia Pacific (APAC)
Shanghai, 200040, P.R. China
Tel: +86-21-5836-8276
Fax: +86-21-5836-7652
Peregrine Semiconductor, Korea
#B-2607, Kolon Tripolis, 210
Geumgok-dong, Bundang-gu, Seongnam-si
Gyeonggi-do, 463-943 South Korea
Tel: +82-31-728-3939
Fax: +82-31-728-3940
Peregrine Semiconductor K.K., Japan
Teikoku Hotel Tower 10B-6
1-1-1 Uchisaiwai-cho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel: +81-3-3502-5211
Fax: +81-3-3502-5213