XAA170 Dual Single-Pole, Normally Open OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Input Control Current Rating 350 100 50 5 Units VP mArms / mADC mA Description The XAA170 is a dual, normally open (1-Form-A) solid state relay comprising two independent, optically coupled relays in a single 8-pin package. Using optically coupled MOSFET technology, it provides 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. Features * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available By incorporating two independent single-pole relays into a single 8-pin package, the XAA170 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Compliant Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # Description XAA170 XAA170P XAA170PTR XAA170S XAA170STR 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack T&R (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount T&R (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-XAA170-R05 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION XAA170 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Ratings 350 5 50 1 150 800 Units VP V mA A mW mW Isolation Voltage, Input to Output Operational Temperature Storage Temperature 3750 -40 to +85 -40 to +125 Vrms C C 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C 2 Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance Input to Output 2 Conditions Symbol Min Typ Max Units t=10ms IL=100mA VL=350VP IL ILPK RON ILEAK - 33 - 100 350 50 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 25 5 5 - IL = 100mA - IF - 0.4 0.7 5 - mA mA IF = 5mA VR = 5V VF IR 0.9 - 1.2 - 1.4 10 V A - - - 3 - pF IF = 5mA, VL = 10V www.ixysic.com A ms pF R05 INTEGRATED CIRCUITS DIVISION XAA170 PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical LED Forward Voltage Drop (N=50, IF=5mA) 35 25 25 20 15 10 5 0 20 15 10 5 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 0.67 Typical IF for Switch Operation (N=50, IL=100mADC) Device Count (N) 15 10 5 0 0.83 0.91 0.99 1.06 Turn-On Time (ms) 0.50 0.56 0.62 0.69 0.75 LED Current (mA) 10 5 0.11 20 15 10 5 0.14 0.17 0.19 0.22 0.25 Turn-Off Time (ms) 0.28 Typical On-Resistance Distribution (N=50, IL=100mADC) 25 20 15 10 5 0 0 0.44 15 1.14 Typical IF for Switch Dropout (N=50, IL=100mADC) 25 20 0.75 Device Count (N) 25 20 0 0 1.17 Typical Turn-Off Time (N=50, IF=5mA, IL=100mADC) 25 Device Count (N) Device Count (N) Device Count (N) 30 Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mADC) 0.81 0.44 0.50 0.56 0.62 0.69 0.75 29.09 29.86 30.63 31.40 32.16 32.93 33.70 0.81 On-Resistance (:) LED Current (mA) Typical Blocking Voltage Distribution (N=50) Device Count (N) 25 20 15 10 5 0 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=100mADC) 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off Time (ms) 1.8 Turn-On Time (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 Typical Turn-Off Time vs. LED Forward Current (IL=100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION XAA170 PERFORMANCE DATA @25C (Unless Otherwise Noted)* 1.8 1.4 1.2 1.0 IF=10mA 0.8 IF=20mA 0.6 0.4 0.2 0 -40 -20 0 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 100 120 20 40 60 80 Temperature (OC) 3 2 1 20 40 60 80 100 40 60 10 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 4 3 2 0 20 20 -40 120 1 0 0 30 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (OC) Temperature (OC) Maximum Load Current vs. Temperature Typical Blocking Voltage vs. Temperature 450 0.014 Blocking Voltage (VP) 455 140 120 100 IF=10mA IF=5mA IF=2mA 40 445 440 435 430 20 425 0 -40 420 -20 0 20 40 60 80 20 40 60 80 Temperature (OC) 100 120 Typical Load Current vs. Load Voltage (IF=5mA) -4 -3 -2 -1 0 1 2 3 4 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 100 120 Typical Leakage vs. Temperature Measured Across Pins 4&6 160 60 0 Load Voltage (V) 0.016 80 -20 Load Current (mA) LED Current (mA) LED Current (mA) 0 Typical IF for Switch Dropout vs. Temperature (IL=100mADC) 6 4 -20 40 0 -20 5 -40 50 Temperature (C) 5 Load Current (mA) 60 -40 Typical IF for Switch Operation vs. Temperature (IL=100mADC) 6 Typical On-Resistance vs. Temperature (IF=5mA, IL=100mADC) 70 Leakage (PA) Turn-On Time (ms) Turn-Off Time (ms) IF=5mA 1.6 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=120mADC) On-Resistance (:) Typical Turn-On Time vs. Temperature (IL=100mADC) 0 -40 -20 0 20 40 60 80 100 Temperature (OC) Load Current (A) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION XAA170 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating XAA170 / XAA170S / XAA170P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time XAA170 / XAA170S 250C for 30 seconds XAA170P 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R05 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION XAA170 Mechanical Dimensions XAA170 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 0.254 0.0127 (0.010 0.0005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) XAA170S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) XAA170P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) Pin 1 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION XAA170 XAA170STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 XAA170PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-XAA170-R05 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: XAA170S XAA170STR XAA170