INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-XAA170-R05 1
XAA170
Dual Single-Pole, Normally Open
OptoMOS® Relay
e3
Pb
Part # Description
XAA170 8-Pin DIP (50/Tube)
XAA170P 8-Pin Flatpack (50/Tube)
XAA170PTR 8-Pin Flatpack T&R (1000/Reel)
XAA170S 8-Pin Surface Mount (50/Tube)
XAA170STR 8-Pin Surface Mount T&R (1000/Reel)
Parameter Rating Units
Blocking Voltage 350 VP
Load Current 100 mArms / mADC
On-Resistance (max) 50
Input Control Current 5 mA
Applications
Features
Description
Ordering Information
Pin Configuration
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Compliant
1
2
3
4
8
7
6
5
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Form-A
IF
ILOAD
10%
90%
ton toff
Switching Characteristics of
Normally Open Devices
The XAA170 is a dual, normally open (1-Form-A)
solid state relay comprising two independent, optically
coupled relays in a single 8-pin package. Using
optically coupled MOSFET technology, it provides
3750Vrms of input to output isolation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
By incorporating two independent single-pole relays
into a single 8-pin package, the XAA170 saves board
space by providing a more compact design solution
than two discrete single-pole relays in a variety of
applications.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R05
XAA170
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current, Continuous - IL- - 100 mArms / mADC
Peak Load Current t=10ms ILPK - - 350 mAP
On-Resistance IL=100mA RON -3350
Off-State Leakage Current VL=350VPILEAK --1µA
Switching Speeds
Turn-On IF = 5mA, VL = 10V ton --5ms
Turn-Off toff --5
Output Capacitance VL=50V, f=1MHz COUT -25 - pF
Input Characteristics
Input Control Current to Activate IL = 100mA IF--5mA
Input Control Current to Deactivate - - 0.4 0.7 - mA
Input Voltage Drop IF = 5mA VF0.9 1.2 1.4 V
Reverse Input Current VR = 5V IR--10A
Common Characteristics
Capacitance Input to Output - - - 3 - pF
Electrical Characteristics @ 25ºC
Parameter Ratings Units
Blocking Voltage 350 VP
Reverse Input Voltage 5 V
Input Control Current
Peak (10ms)
50 mA
1A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
INTEGRATED CIRCUITS DIVISION
XAA170
www.ixysic.com 3
R05
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Typical Turn-On Time
(N=50, IF=5mA, IL=100mADC)
0.67 0.83 0.99 1.140.75 0.91 1.06
Turn-On Time (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mADC)
0.11 0.17 0.22 0.280.250.190.14
Turn-Off Time (ms)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Operation
(N=50, IL=100mADC)
0.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Dropout
(N=50, IL=100mADC)
25
20
15
10
5
0
0.50 0.62 0.750.44 0.56 0.69 0.81
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
29.09 30.63 32.16 33.7029.86 31.40 32.93
Device Count (N)
Typical On-Resistance Distribution
(N=50, IL=100mADC)
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
25
20
15
10
5
0
424.0 434.5 444.9 455.4429.3 439.7 450.1
Blocking Voltage (VP)
Device Count (N)
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=30mA
I
F
=20mA
I
F
=10mA
I
F
=5mA
LED Forward Current (mA)
Turn-On Time (ms)
05 1015202530354045
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
Typical Turn-On Time
vs. LED Forward Current
(IL=100mADC)
LED Forward Current (mA)
Turn-Off Time (ms)
05 1015202530354045
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mADC)
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R05
XAA170
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Temperature (OC)
IF=5mA
IF=10mA
IF=20mA
Turn-On Time (ms)
-40
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
-20 0 20 40 60 80 100 120
Typical Turn-On Time
vs. Temperature
(IL=100mADC)
0
Typical Turn-Off Time
vs. Temperature
(IF=5mA, IL=120mADC)
Temperature (ºC)
Turn-Off Time (ms)
-40
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
-20 0 20 40 60 80 100 120
Temperature (OC)
-40
70
60
50
40
30
20
10
0
-20 0 20 40 60 80 100 120
On-Resistance (:)
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=100mADC)
Temperature (OC)
LED Current (mA)
-40
6
5
4
3
2
1
0
-20 0 20 40 60 80 100 120
Typical IF for Switch Operation
vs. Temperature
(IL=100mADC)
Temperature (OC)
LED Current (mA)
-40
6
5
4
3
2
1
0
-20 0 20 40 60 80 100 120
Typical IF for Switch Dropout
vs. Temperature
(IL=100mADC)
Load Voltage (V)
Load Current (mA)
120
100
80
60
40
20
0
-20
-40
-60
-80
-100
-120 -3-4 -2 -1 0 1 2 3 4
Typical Load Current
vs. Load Voltage
(IF=5mA)
Maximum Load Current
vs. Temperature
Load Current (mA)
160
140
120
100
80
60
0
20
40
-40 -20 120100806040200
IF=10mA
IF=2mA
IF=5mA
Temperature (ºC) Temperature (ºC)
Blocking Voltage (VP)
-40
455
450
445
440
435
430
425
420 -20 0 20 40 60 80 100
Typical Blocking Voltage
vs. Temperature
Temperature (OC)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 4&6
Leakage (PA)
Time
Load Current (A)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
1ms 100ms 1s10ms 10s 100s
Energy Rating Curve
10Ps 100Ps
INTEGRATED CIRCUITS DIVISION
XAA170
www.ixysic.com 5
R05
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
XAA170 / XAA170S / XAA170P MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
XAA170 / XAA170S 250ºC for 30 seconds
XAA170P 260ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
6R05
XAA170
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.813 ± 0.102
(0.032 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
0.254 ± 0.0127
(0.010 ± 0.0005)
Dimensions
mm
(inches)
PCB Land Pattern
9.398 ± 0.127
(0.370 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0 MIN / 0.102 MAX
(0 MIN / 0.004 MAX)
2.286 MAX.
(0.090 MAX.)
0.203 ± 0.013
(0.008 ± 0.0005)
0.635 ± 0.127
(0.025 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
0.457 ± 0.076
(0.018 ± 0.003)
2.159 ± 0.025
(0.085 ± 0.001)
2.54
(0.10)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
0.864 ± 0.120
(0.034 ± 0.004)
Pin 1
Dimensions
mm
(inches)
PCB Land Pattern
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
6.350 ± 0.127
(0.250 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
0.813 ± 0.102
(0.032 ± 0.004)
4.445 ± 0.127
(0.175 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
XAA170
XAA170S
XAA170P
Mechanical Dimensions
INTEGRATED CIRCUITS DIVISION
Specification: DS-XAA170-R05
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012
For additional information please visit our website at: www.ixysic.com
7
XAA170
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Dimensions
mm
(inches)
User Direction of Feed
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K1
=4.20
(0.165)
0
K =4.90
(0.193)
P=12.00
(0.472)
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
User Direction of Feed
P = 12.00
(0.472)
W = 16.00
(0.63)
Bo = 10.30
(0.406)
Ao = 10.30
(0.406)
K1 = 2.00
(0.079)
K0 = 2.70
(0.106)
7.50
(0.295)
2.00
(0.079)
4.00
(0.157)
XAA170STR Tape & Reel
XAA170PTR Tape & Reel
