LS-XWA-ZBZ - EATON CUTLER HAMMER

LS-Titan Products CA05208003E—January 2011 www.eaton.com 1

LS-Titan Products

LS-Titan Miniature DIN Switches

LS-Titan Safety Interlock Switches

46.3 LS-Titan Miniature DIN Switches

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Standards and Certiﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Technical Data and Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Contact Travel Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

45.1 LS-Titan Safety Interlock Switches

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Standards and Certiﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Product Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Technical Data and Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Note: Supplement to Volume 8—Sensing Solutions, CA08100010E, Tabs 46 and 45.

2 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS-Titan Miniature DIN Switches Contents

Description Page

LS-Titan Miniature DIN Switches

Product Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

LS-Titan Plastic Safety Switches . . . . . . . . . . . . . . . . 4

LS-Titan Plastic Electronic

Safety Position Switches . . . . . . . . . . . . . . . . . . . . 7

LS-Titan Metal Safety Switches . . . . . . . . . . . . . . . . 11

Understanding LS-Titan Electronic

Safety Position Switches . . . . . . . . . . . . . . . . . . . . 13

Operating Point Adjustment . . . . . . . . . . . . . . . . . . . 13

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Technical Data and Speciﬁcations . . . . . . . . . . . . . . . . . 15

Contact Travel Diagrams . . . . . . . . . . . . . . . . . . . . . . . . 18

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

LS-Titan Miniature DIN Switches

Product Description

Eaton’s LS-Titan™ limit

switch line is a complete

offering of safety position

switches designed for

worldwide application.

Economical insulated

plastic or rugged metal

enclosures and modular,

plug-in operating heads

and bodies make LS-Titan a

flexible switching solution.

A highlight of the LS-Titan

switch line is the world’s

first electronic position

switch (LSE models). These

switches feature freely

programmable operating

points that can be set

individually at any time.

Additional LSE models

provide analog outputs

proportional to the

actuator position.

LS-Titan switches are suitable

for use in safety applications

designed to protect persons

or processes.

Features

●Modular, plug-in

system (head and

body components)

●Positive opening NC

contacts for safety

applications

●Wide variety of economical

plastic and rugged metal

versions available

●Operating heads can

be rotated 90 degrees

to suit speciﬁc direction

of operation

●Unique electronic safety

position switches (LSE

models) provide analog

(0–10 Vdc or 4–20 mA)

outputs proportional to the

actuator position and allow

for easy conﬁguration of

a custom trip point

●Can be ordered as

separate components

(head and body) or as

completely assembled

switches

●Screw and Cage Clamp

(standard on LSE models

and optionally available

on mechanical models)

connections provide larger

wiring areas for easier

installation

●Approved for worldwide

application

Standards and Certiﬁcations

●Safety function by positive

opening contacts per

IEC/EN 60947-5-1 up to

Category 4 per EN 954-1

●TÜV-Rheinland Certiﬁed

for Functional-Safety

(LSE models)

●CSA certiﬁed

●UL listed

●CE

●CCC

Note: Cage Clamp is a

registered trademark of

Wago Kontakttechnik,

32423 Minden, Germany.

For the most current information

on this product, visit our web site:

www.eaton.com

LS-Titan Products CA05208003E—January 2011 www.eaton.com 3

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Product Identiﬁcation

Notes

Basic device (see Pages 4–12)

According to EN 50047

With screw-on cover

Contacts: 1NO-1NC, 2NO, 2NC

Cage Clamp, screw terminal

As snap-action or standard-action switch

As electronic snap-action switch

(individually adjustable)

As 4–20 mA analog signal encoder

As 0–10 Vdc analog signal encoder

Fixing adapter (see Page 14)

Allows mounting of M22 pushbuttons

Roller lever (see Pages 4 and 7)

For one-sided operation with higher

operating speed

Angled roller lever

(see Pages 4, 7 and 11)

For actuation along the unit axis

Rotary lever (see Pages 4, 8 and 11)

For actuation from the side, for

pendulum movements

Roller plunger (see Pages 4, 7 and 11)

For actuation from the side with low

actuating force

Adjustable roller lever

(see Pages 5, 8, 9 and 11)

For length adjustment as required

Actuating rod (see Pages 6, 10 and 12)

On conveyor belts for lightweight goods

Spring-rod (see Pages 6, 10 and 12)

For ﬂexible actuation from all sides

jActuating rod (see Pages 6, 10 and 12)

Withdrawable mechanism from front

k Pushbuttons from the M22 family; see

M22 catalog (CA04716001E) or

www.eaton.com/m22

Operating heads can be rotated

by 90 degrees.









햻

햽











4 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Product Selection

LS-Titan Plastic Safety Switches

Plastic Safety Switches

Notes

 Cage Clamp versions available. Contact Application Engineering.



For operating head dimensions, see Page 21.

Switch Body Catalog Number LS-S02 LS-S20A LS-S11S

Output Function 2NC with positive

opening contacts

2NO with slow

make/break

1NO and 1NC with

positive opening contact

Terminal Connection Screw terminal Screw terminal Screw terminal 

Contact Sequence

Contact Travel Snap-action contact

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XP LS-S02-P LS-S20A-P LS-S11S-P

LS-XL LS-S02-L LS-S20A-L LS-S11S-L

LS-XLS LS-S02-LS LS-S20A-LS LS-S11S-LS

LS-XLB LS-S02-LB LS-S20A-LB LS-S11S-LB

LS-XLA LS-S02-LA LS-S20A-LA LS-S11S-LA

LS-XRL LS-S02-RL LS-S20A-RL LS-S11S-RL

Plastic Safety

Switch Body

Top Push Roller

Plunger

Long Roller Lever

Short Roller Lever

Large Roller Lever

Angled Roller

Assembled Switch

Rotary Lever

12 22

11 13

14 24

14 22

= contact closed

= contact open NC

11–12

21–22 NC

Zw = 4.5 mm

3.0

03.0 6.1

13–14

23–24 NO

2.1

02.1 6.1

ZW = 4.5 mm 13–14

13–14

21–22

Zw = 5.5 mm

1.6

03.0 6.1

LS-Titan Products CA05208003E—January 2011 www.eaton.com 5

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Plastic Safety Switches, continued

Notes

 Cage Clamp versions available. Contact Application Engineering.



For operating head dimensions, see Page 21.

Switch Body Catalog Number LS-S02 LS-S20A LS-S11S

Output Function 2NC with positive

opening contacts

2NO with slow

make/break

1NO and 1NC with

positive opening contact

Terminal Connection Screw terminal Screw terminal Screw terminal 

Contact Sequence

Contact Travel Snap-action contact

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XRLA LS-S02-RLA LS-S20A-RLA LS-S11S-RLA

LS-XRLA30 LS-S02-RLA30 LS-S20A-RLA30 LS-S11S-RLA30

LS-XRLA40 LS-S02-RLA40 LS-S20A-RLA40 LS-S11S-RLA40

LS-XRLA40R LS-S02-RLA40R LS-S20A-RLA40R LS-S11S-RLA40R

Adjustable

Roller Lever

(with 18 mm Roller)

Adjustable

Roller Lever

(with 30 mm Roller)

Adjustable

Roller Lever

(with 40 mm Roller)

Adjustable Roller

Lever (with 40 mm

Rubber Roller)

Plastic Safety

Switch Body

Assembled Switch

12 22

11 13

14 24

14 22

= contact closed

= contact open NC

11–12

21–22 NC

Zw = 4.5 mm

3.0

03.0 6.1

13–14

23–24 NO

2.1

02.1 6.1

ZW = 4.5 mm 13–14

13–14

21–22

Zw = 5.5 mm

1.6

03.0 6.1

6 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Plastic Safety Switches, continued

Notes

 Cage Clamp versions available. Contact Application Engineering.



For operating head dimensions, see Page 21.



Not to be used as a safety position switch. Use only in conjunction with snap-action contact.

Switch Body Catalog Number LS-S02 LS-S20A LS-S11S

Output Function 2NC with positive

opening contacts

2NO with slow

make/break

1NO and 1NC with

positive opening contact

Terminal Connection Screw terminal Screw terminal Screw terminal 

Contact Sequence

Contact Travel Snap-action contact

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XRR LS-S02-RR LS-S20A-RR LS-S11S-RR

LS-XRRM LS-S02-RRM LS-S20A-RRM LS-S11S-RRM

LS-XS LS-S02-S LS-S20A-S LS-S11S-S

LS-XOR LS-S02-OR LS-S20A-OR LS-S11S-OR

Plastic Rod Lever

Metal Rod

Spring Rod (Wobble) 

Actuating Rod

Plastic Safety

Switch Body

Assembled Switch

12 22

11 13

14 24

14 22

= contact closed

= contact open NC

11–12

21–22 NC

Zw = 4.5 mm

3.0

03.0 6.1

13–14

23–24 NO

2.1

02.1 6.1

ZW = 4.5 mm 13–14

13–14

21–22

Zw = 5.5 mm

1.6

03.0 6.1

LS-Titan Products CA05208003E—January 2011 www.eaton.com 7

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS-Titan Plastic Electronic Safety Position Switches

Plastic Electronic Safety Position Switches

Notes

 A compatible Cage Clamp tool is available as an accessory on Page 14.



For operating head dimensions, see Page 21.

Switch Body

Catalog Number LSE-11 LSE-02 LSE-AI LSE-AU

Output Function 1NO and 1 NC 2NC Analog 4–20 mA Analog 0–10V

Terminal Connections Cage Clamp Cage Clamp Cage Clamp Cage Clamp 

Safety Functions

and Approvals

These models may be used in safety-oriented circuits. Visual status

LED indication is comparable to positive opening contacts. Certiﬁed

by TÜV as a “Functional-Safety” device. Suitable for protection of

people or processes.

Additional diagnostic output that registers a 0V signal in the event

of a fault. Self-test function continuously tests both outputs for

overloads, short circuits to 0V and short circuits to +Ue. Certiﬁed by

TÜV to EN 954-1, Category 3 or 4. Suitable for protection of people

or processes.

Contact Sequence Analog 4–20 mA Analog 0–10V

Contact Travel

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XP LSE-11-P LSE-02-P LSE-AI-P LSE-AU-P

LS-XL LSE-11-L LSE-02-L LSE-AI-L LSE-AU-L

LS-XLS LSE-11-LS LSE-02-LS LSE-AI-LS LSE-AU-LS

LS-XLB LSE-11-LB LSE-02-LB LSE-AI-LB LSE-AU-LB

LS-XLA LSE-11-LA LSE-02-LA LSE-AI-LA LSE-AU-LA

Plastic Electronic

Safety Position

Switch Body

Top Push Roller

Plunger

Long Roller Lever

Short Roller Lever

Large Roller Lever

Assembled Switch

Angled Roller

+Ue

electron.

+Ue

electron.

= contact closed

= contact open

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

I [mA]

100

S [%]

0100

S [%]

U [V]

8 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Plastic Electronic Safety Position Switches, continued

Notes

 A compatible Cage Clamp tool is available as an accessory on Page 14.



For operating head dimensions, see Page 21.

Switch Body

Catalog Number LSE-11 LSE-02 LSE-AI LSE-AU

Output Function 1NO and 1NC 2NC Analog 4–20 mA Analog 0–10V

Terminal Connections Cage Clamp Cage Clamp Cage Clamp Cage Clamp 

Safety Functions

and Approvals

These models may be used in safety-oriented circuits. Visual status

LED indication is comparable to positive opening contacts. Certiﬁed

by TÜV as a “Functional-Safety” device. Suitable for protection of

people or processes.

Additional diagnostic output that registers a 0V signal in the event

of a fault. Self-test function continuously tests both outputs for

overloads, short circuits to 0V and short circuits to +Ue. Certiﬁed by

TÜV to EN 954-1, Category 3 or 4. Suitable for protection of people

or processes.

Contact Sequence Analog 4–20 mA Analog 0–10V

Contact Travel

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XRL LSE-11-RL LSE-02-RL LSE-AI-RL LSE-AU-RL

LS-XRLA LSE-11-RLA LSE-02-RLA LSE-AI-RLA LSE-AU-RLA

LS-XRLA30 LSE-11-RLA30 LSE-02-RLA30 LSE-AI-RLA30 LSE-AU-RLA30

Rotary Lever

Adjustable

Roller Lever

(with 18 mm Roller)

Adjustable

Roller Lever

(With 30 mm Roller)

Plastic Electronic

Safety Position

Switch Body

Assembled Switch

+Ue

electron.

+Ue

electron.

= contact closed

= contact open

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

I [mA]

100

S [%]

0100

S [%]

U [V]

LS-Titan Products CA05208003E—January 2011 www.eaton.com 9

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Plastic Electronic Safety Position Switches, continued

Notes

 A compatible Cage Clamp tool is available as an accessory on Page 14.



For operating head dimensions, see Page 21.

Switch Body

Catalog Number LSE-11 LSE-02 LSE-AI LSE-AU

Output Function 1NO and 1NC 2NC Analog 4–20 mA Analog 0–10V

Terminal Connections Cage Clamp Cage Clamp Cage Clamp Cage Clamp 

Safety Functions

and Approvals

These models may be used in safety-oriented circuits. Visual status

LED indication is comparable to positive opening contacts. Certiﬁed

by TÜV as a “Functional-Safety” device. Suitable for protection of

people or processes.

Additional diagnostic output that registers a 0V signal in the event

of a fault. Self-test function continuously tests both outputs for

overloads, short circuits to 0V and short circuits to +Ue. Certiﬁed by

TÜV to EN 954-1, Category 3 or 4. Suitable for protection of people

or processes.

Contact Sequence Analog 4–20 mA Analog 0–10V

Contact Travel

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XRLA40 LSE-11-RLA40 LSE-02-RLA40 LSE-AI-RLA40 LSE-AU-RLA40

LS-XRLA40R LSE-11-RLA40R LSE-02-RLA40R LSE-AI-RLA40R LSE-AU-RLA40R

LS-XRR LSE-11-RR LSE-02-RR LSE-AI-RR LSE-AU-RR

Plastic Rod Lever

Adjustable

Roller Lever

(With 40 mm Roller)

Adjustable

Roller Lever

(With 40 mm Roller)

Plastic Electronic

Safety Position

Switch Body

Assembled Switch

+Ue

electron.

+Ue

electron.

= contact closed

= contact open

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

I [mA]

100

S [%]

0100

S [%]

U [V]

10 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Plastic Electronic Safety Position Switches, continued

Notes

 A compatible Cage Clamp tool is available as an accessory on Page 14.



For operating head dimensions, see Page 21.



Not to be used as a safety position switch. Use only in conjunction with snap-action contact.

Switch Body

Catalog Number LSE-11 LSE-02 LSE-AI LSE-AU

Output Function 1NO and 1NC 2NC Analog 4–20 mA Analog 0–10V

Terminal Connections Cage Clamp Cage Clamp Cage Clamp Cage Clamp 

Safety Functions

and Approvals

These models may be used in safety-oriented circuits. Visual status

LED indication is comparable to positive opening contacts. Certiﬁed

by TÜV as a “Functional-Safety” device. Suitable for protection of

people or processes.

Additional diagnostic output that registers a 0V signal in the event

of a fault. Self-test function continuously tests both outputs for

overloads, short circuits to 0V and short circuits to +Ue. Certiﬁed

by TÜV to EN 954-1, Category 3 or 4. Suitable for protection of people

or processes.

Contact Sequence Analog 4–20 mA Analog 0–10V

Contact Travel

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LS-XRRM LSE-11-RRM LSE-02-RRM LSE-AI-RRM LSE-AU-RRM

LS-XS LSE-11-S LSE-02-S LSE-AI-S LSE-AU-S

LS-XOR LSE-11-OR LSE-02-OR LSE-AI-OR LSE-AU-OR

Plastic Electronic

Safety Position

Switch Body

Spring Rod (Wobble) 

Actuating Rod

Assembled Switch

Metal Rod

+Ue

electron.

+Ue

electron.

= contact closed

= contact open

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

I [mA]

100

S [%]

0100

S [%]

U [V]

LS-Titan Products CA05208003E—January 2011 www.eaton.com 11

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS-Titan Metal Safety Switches

Metal Safety Switches

Note

 For operating head dimensions, see Page 21.

Switch Body Catalog Number LSM-02 LSM-20A LSM-11S

Output Function 2NC with positive

opening contacts

2NO with slow

make/break

1NO and 1NC with

positive opening contact

Terminal Connection Cage Clamp Cage Clamp Cage Clamp

Contact Sequence

Contact Travel Snap-action contact

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LSM-XP LSM-02-P LSM-20A-P LSM-11S-P

LSM-XL LSM-02-L LSM-20A-L LSM-11S-L

LSM-XLA LSM-02-LA LSM-20A-LA LSM-11S-LA

LSM-XRL LSM-02-RL LSM-20A-RL LSM-11S-RL

LSM-XRLA LSM-02-RLA LSM-20A-RLA LSM-11S-RLA

Top Push Roller

Plunger

Long Roller Lever

Angled Roller

Rotary Lever

Adjustable Roller Lever

Metal Safety

Switch Body

Assembled Switch

12 22

11 13

14 24

14 22

= contact closed

= contact open NC

11–12

21–22 NC

Zw = 4.5 mm

3.0

03.0 6.1

13–14

23–24 NO

2.1

02.1 6.1

ZW = 4.5 mm 13–14

13–14

21–22

Zw = 5.5 mm

1.6

03.0 6.1

12 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Metal Safety Switches, continued

Note

 For operating head dimensions, see Page 21.

Switch Body Catalog Number LSM-02 LSM-20A LSM-11S

Output Function 2NC with positive

opening contacts

2NO with slow

make/break

1NO and 1NC with

positive opening contact

Terminal Connection Cage Clamp Cage Clamp Cage Clamp

Contact Sequence

Contact Travel Snap-action contact

Operating Head Type 

Head Only

Catalog Number

Assembled Switch

Catalog Number

LSM-XRR LSM-02-RR LSM-20A-RR LSM-11S-RR

LSM-XRRM LSM-02-RRM LSM-20A-RRM LSM-11S-RRM

LSM-XS LSM-02-S LSM-20A-S LSM-11S-S

Metal Safety

Switch Body

Metal Rod Lever

Spring Rod (Wobble)

Plastic Rod Lever

Assembled Switch

12 22

11 13

14 24

14 22

= contact closed

= contact open

11–12

21–22 NC

Zw = 4.5 mm

3.0

03.0 6.1

13–14

23–24 NO

2.1

02.1 6.1

ZW = 4.5 mm

13–14

21–22

Zw = 5.5 mm

1.6

03.0 6.1

LS-Titan Products CA05208003E—January 2011 www.eaton.com 13

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Understanding LS-Titan Electronic Safety Position Switches

All four LS-Titan LSE switch

bodies are safety-rated

products. The LSE-11 and

LSE-02 switch bodies both

have a freely programmable

operating point and can be

individually adjusted to suit

the application, and can be

changed as often as required.

These devices feature an

LED on the body, providing

simple indication during

programming and operation.

The LSE-AI (4–20 mA) and

LSE-AU (0–10V) analog

position switches take

position data and convert to

an analog current or voltage

value that can then be

continuously fed into an

automation system. These

two switches also feature

a diagnostic output for

additional data processing.

Operating Point Adjustment

LSE-11

Example of LS-Titan LSE Models in a Safety-Oriented Circuit

Notes

LSE-11 and LSE-02—individual operating point adjustment.

LSE-11 and LSE-02 can be used in safety circuits.

S1 is connected to 24 Vdc

S2, S3 each switch with a delay of 0.7s

R1, R2, e.g., series element M22-XLED60 (2820 ohms/0.5W)

+24V

LS-_

LSE-11

0V 0V 0V

+Ue+Ue+Ue

LSE-11

This ensures that a safe

operating state can be

monitored and evaluated at

any time. A self-test function

is also present on these

models. Outputs Q1 and Q2

are continuously tested for

overloads, short circuits to 0V

and short circuits to +Ue.

Like the electromechanical

position switches, LS-Titan

electronic position switches

meet Category 3 or 4 of

the EN 954-1 standard for

machine safety when

configured as a redundant

system. All devices are

thus suitable for safety

applications that are used

for the protection of persons

or processes.

LSE-02

LED 1 s

Set

fix

adjust

fmax ≤ 2 N

Set

14 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Accessories

LS-Titan Safety Switches

For Use With Description Notes Catalog Number

Any M20 screw terminal in 1/2 in. For use with

American pipe thread, metal.

The screw connection must be earthed.

Not total insulation.

V1-2-M20-NA

Any M20 screw terminal in 1/2 in. For use with

American pipe thread, molded material.

— V1-2-M20

Any M20 diaphragm bolt. With internal push-through

membrane. Will ﬁt cable with an external diameter

of up to 13 mm. Rated IP65 with cable inserted.

— EMS20

Any Cage Clamp tool. — LS-XTW

LS-Titan plastic bodies (LS-_) Plug connector, 12 mm, 4-pin male connector

M12x1 (M12x1). Rated IP65. Molded material.

Color coded to IEC/EN 60947-5-2.

MS12A

LS-Titan metal bodies (LSM-_) Plug connector, 12 mm, 5-pin male connector

(M12x1). Rated IP65. Molded material.

Color coded to IEC/EN 60947-5-2.

MS12A5

Any Allows mounting of M22 pushbuttons.

(See the M22 catalog, CA04716001E, for

a full selection of pushbuttons.)

— M22-LS

V1-2-M20

M20

1/2 in

EMS20

LS-XTW

M12A

M12A5

M22-LS

..-11-.. ..-20-..

..-02-..

..-11-.. ..-20-..

..-02-..

LS-Titan Products CA05208003E—January 2011 www.eaton.com 15

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Technical Data and Speciﬁcations

LS-Titan Miniature DIN Switches—IP66, IP67 Complete Units

Note

The following applies for LSE-11 and LSE-02: ensure that the power supply operates correctly when setting the operating point.

Units LS, LSM LSE-11/LSE-02 LSE-AI  LSE-AU



General

Standards IEC/EN 60947 IEC/EN 60947

EN 61000-4

IEC/EN 60947

EN 61000-4

IEC/EN 60947

EN 61000-4

Climatic prooﬁng Damp heat, constant, to IEC

60068-2-78; damp heat,

cyclical, to IEC 60068-2-30

Damp heat, constant, to IEC

60068-2-78; damp heat,

cyclical, to IEC 60068-2-30

Damp heat, constant, to IEC

60068-2-78; damp heat,

cyclical, to IEC 60068-2-30

Damp heat, constant, to IEC

60068-2-78; damp heat,

cyclical, to IEC 60068-2-30

Ambient temperature °F (°C) –13° to 158°F (–25° to 70°C) –13° to 158°F (–25° to 70°C) –13° to 158°F (–25° to 70°C) –13° to 158°F (–25° to 70°C)

Mounting position As required As required As required As required

Protection type IP66, IP67 IP66, IP67 IP66, IP67 IP66, IP67

Terminal capacity of screw

terminal and Cage Clamp

Solid mm21 x (0.5–2.5) 1 x (0.5–2.5) 1 x (0.5–2.5) 1 x (0.5–2.5)

Flexible with ferrules to DIN 46228 mm21 x (0.5–1.5) 1 x (0.5–1.5) 1 x (0.5–1.5) 1 x (0.5–1.5)

Power Supply

Rated voltage UeVdc N/A 12–30 24 (–15%/+20%) 24 (–15%/+20%)

Burden current

12V IemA N/A 15 N/A N/A

24V IemA N/A 18 28–45 24

30V I mA N/A 19 N/A N/A

Contacts/Switching Capacity

Rated impulse withstand voltage Uimp Vac 4000 N/A N/A N/A

Rated insulation voltage UiV 400 N/A N/A N/A

Overvoltage category/

pollution degree

III/3 III/3 N/A N/A

Rated Operational Current

AC-15

24V IeA 6 N/A N/A N/A

230V/240V IeA 6 N/A N/A N/A

400V/415V IeA 4 N/A N/A N/A

DC-13

24V IeA 3 0.2 N/A N/A

110V IeA 0.8 N/A N/A N/A

220V IeA 0.3 N/A N/A N/A

16 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS-Titan Miniature DIN Switches—IP66, IP67 Complete Units. continued

Note

The following applies for LSE-11 and LSE-02: ensure that the power supply operates correctly when setting the operating point.

Units LS, LSM LSE-11/LSE-02 LSE-AI  LSE-AU



Burden Current

Analog output Q1

Output voltage (max. 10 mA) Vdc N/A N/A 0–10

Output current mA N/A N/A 4–20

Fault scenario V N/A N/A 0 0

Resolution Steps N/A N/A 100 100

Step tolerance Steps N/A N/A 1 1

Shunt resistor, resistive load ohms N/A N/A <400 >1000

Digital diagnostics output Q2

(switching to + pole PNP)

Response threshold V N/A N/A Approx. UeApprox. Ue

mA N/A N/A <200 <200

Control circuit reliability

At 24 Vdc/5 mA HFFault probability <10–7,

<1 fault in 107 operations

N/A N/A N/A

At 5 Vdc/1 mA HFFault probability <10–6,

<1 failure at 5 x 106 operations

N/A N/A N/A

Supply frequency Hz Max. 400 N/A N/A N/A

Short-circuit rating to

IEC/EN 60947-5-1

Maximum fuse A gG/gL 6 N/A N/A N/A

Repetition accuracy mm ±0.02 ±0.02 ±0.02 ±0.02

LS-Titan Products CA05208003E—January 2011 www.eaton.com 17

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS-Titan Miniature DIN Switches—IP66, IP67 Complete Units

Units LS, LSM LSE-11/LSE-02 LSE-AI/LSE-AU LSE-AI/LSE-AU

Mechanical Variables

Lifespan

Standard-action contact Operations X 1068 N/A N/A N/A

Snap-action contact Operations X 1068 3 (electronic) N/A N/A

Contact temperature of roller head °C )100 )100 )100 )100

Mechanical shock resistance

(half-sinusoidal shock, 20 ms)

Standard-action contact g 25 N/A N/A N/A

Snap-action contact 9 N/A N/A N/A N/A

Basic unit g N/A 30 30 30

Operating frequency Operations/h )6000 )3000 )3000 )3000

Switching point N/A 0.5–5.5 mm freely adjustable N/A N/A

Hysteresis mm N/A 0.4 0.4 0.4

Contact sequence (contact closed

open Zw = positive opening clearance)

mm N/A 0.04 0.06 0.06

Actuation

Mechanical

Actuating force at beginning/

end of stroke

Basic units N 1.0/8.0 3.5/8.0 3.5/8.0 3.5/8.0

LS(M)-XP N 1.0/8.0 1.0/8.0 1.0/8.0 1.0/8.0

LS(M)-XL N 1.0/8.0 1.0/8.0 1.0/8.0 1.0/8.0

LS(M)-XLA N 1.0/8.0 1.0/8.0 1.0/8.0 1.0/8.0

Actuating torque of rotary drives Nm 0.2 0.2 0.2 0.2

Maximum operating speed

with DIN cam

Basic units for angle of actuation ␣ = 0°/30° m/s 1/0.5 1/0.5 1/0.5 1/0.5

LS(M)-XRL for angle of actuation ␣ = 0° m/s 1.5 1.5 1.5 1.5

LS(M)-XRLA for angle of actuation ␣ = 30°, L = 125 mm m/s 1.5 1.5 1.5 1.5

LS(M)-XRR for angle of actuation L = 130 mm m/s 1.5 1.5 1.5 1.5

LS(M)-XL for angle of actuation ␣ = 30°/45° m/s 1 1 1 1

LS(M)-XLA for angle of actuation ␣ = 30°/45° m/s 1 1 1 1

LS(M)-XP for angle of actuation ␣ = 0°/30° m/s 1/1 1/1 1/1 1/1

Electromagnetic Compatibility (EMC)

Electrostatic discharge (IEC/EN 61000-4-2, Level 3 ESD)

Air discharge kV 8 8 8

Contact discharge kV 4 4 4

Electromagnetic ﬁelds

(IEC/EN 61000-403, RFI)

V/m 10 10 10

Burst pulses (IEC/EN 61000-4-4, Level 3)

Supply cables kV 2 2 2

Signal lines kV 2 2 2

High-energy pulses (surge)

(IEC/EN 61000-4-5)

kV 0.5 0.5 0.5

Immunity to line-conducted

interference to (IEC/EN 610000-4-6)

V101010

18 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Contact Travel Diagrams

LSE

Description

Contact Travel LSE-11 LSE-02

Basic Units

Operating Heads

Roller plunger

LS-XP

LSM-XP

Roller lever

LS-XL

LSM-XL

LS-XL

LS-XLB

Angled roller lever

LS-XLA

LSM-XLA

Rotary lever

LS-XRL

LSM-XRL

Adjustable roller lever

LS-XRLA

LSM-XRLA

LS-XRLA30

LS-XRLA40

LS-XRLA40R

Actuating rod

LS-XRR

LSM-XRR

LS-XRRM

LSM-XRRM

Spring rod

LS-XS

LSM-XS

= contact closed

= contact open

Q2Q1 Q2

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

0.5 5.5

default=3.0

6.1

0.5 9.0

default=4.4

9.6

0.5 9.0

default=4.4

9.6

0.5 10

default=5.0

10.8

0.5 10

default=5.0

10.8

5°60°

default=30°

65°

0°

5°60°

default=30°

65°

0°

5°60°

default=30°

65°

0°

5°60°

default=30°

65°

0°

5°60°

default=30°

65°

0°

5°60°

default=30°

65°

0°

3°23°

default=13°

26°

0°

3°23°

default=13°

26°

0°

LS-Titan Products CA05208003E—January 2011 www.eaton.com 19

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS and LSM

Description

Contact Travel LS-02, LS-S02, LSM-02 LS-11S, LS-S11S, LSM-11S LS-20A, LS-S20A, LSM-20A

Basic Units

Operating Heads

Roller plunger

LS-XP, LSM-XP

Roller lever

LS-XL, LSM-XL

Roller lever, short

LS-XLS

Roller lever, large

LS-XLB

= contact closed

= contact open

11 212212

13 212214

11–12

21–22 NC

Zw = 4.5 mm 3.0

0 3.0 6.1

13–14

21–22

Zw = 4.5 mm

1.6

03.0 6.1

13–14

23–24 NO

2.1

0 2.1 6.1

ZW = 4.5 mm

11–12

21–22 NC

Zw = 4.5 mm 3.0

0 3.0 6.1

13–14

21–22

Zw = 4.5 mm

1.6

03.0 6.1

13–14

23–24 NO

2.1

0 2.1 6.1

ZW = 4.5 mm

11–12

21–22 NC

Zw = 6.9 mm 4.4

0 4.4 9.6

13–14

21–22

Zw = 8.7 mm

2.3

04.4 9.6

13–14

23–24 NO

3.3

0 9.6

11–12

21–22 NC

3.3

06.9

Zw = 5.0 mm 21–22

13–14

1.7 Zw = 6.2 mm

21–22

13–14

03.3 6.9

13–14

23–24 NO

02.2

2.2

6.9

11–12

21–22 NC

06.3

6.3

13.4

Zw = 9.6 mm 21–22

13–14

3.2 Zw = 12.0 mm

21–22

13–14

06.3 13.4

13–14

23–24 NO

4.3

013.4

20 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

LS and LSM, continued

Description

Contact Travel LS-02, LS-S02, LSM-02 LS-11S, LS-S11S, LSM-11S LS-20A, LS-S20A, LSM-20A

Operating Heads, continued

Angled roller lever

LS-XLA, LSM-XLA

Rotary lever

LS-XRL, LSM-XRL

Adjustable roller lever

LS-XRLA, LSM-XRLA

LS-XRLA30, LS-XRLA40

LS-XRLA40R

Actuating rod

LS-XRR, LSM-XRR

LS-XRRM, LSM-XRRM

Spring rod

LS-XS, LSM-XS

= contact closed

= contact open

11 212212

13 212214

11–12

21–22 NC

Zw = 7.6 mm 5.0

0 5.0 10.8

13–14

21–22

Zw = 9.7 mm

2.4

05.0 10.8

13–14

23–24 NO

3.6

0 10.6

11–12

21–22 NC

Zw = 47° 30°

0 30° 65°

13–14

21–22

Zw = 60°

15°

030° 65°

13–14

23–24 NO

22°

065°

11–12

21–22 NC

13°

013°26°

13–14

21–22

7°

013° 26°

13–14

23–24 NO

9°

026°

LS-Titan Products CA05208003E—January 2011 www.eaton.com 21

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Dimensions

Approximate Dimensions in Inches (mm)

Position Switches

LS-_, LSM-_, LSE-_

LS(M)-_/P

Notes

Tightening torque of cover screws: 0.8 Nm ±0.2 Nm.

Only with LS (insulated version).

Fixing screws 2 x M4 *30

MA = 1.5 Nm

LS(M)-_/S

0.21

(5.3)

2.17

(55.0)

0.32

(8.2)

0.83

(21.0)

0.08

(1.95)

0.46

(11.7)

0.50

(12.7)

0.98

(25.0)

1.22

(31.0)

0.55

(14.0) 1.32

(33.5)

M20

Thread

2.99

(76.0)

0.87

(22.0) 0.79

(20.0)

0.17

(4.3)

0.17

(4.3)

1.97

(50.0)

0.29

(7.3)

0.16

(4.0)







≥0.59 (15.0)

30°

0.46 (11.7)

0.83

(21.0)

0.32

(8.2)

0.50

(12.7)

30°

≥0.79 (20.0)

≥1.00 (25.4)

30° 0.10

(2.5)

1.04

(26.5)

0.35

(9.0)

0.50

(12.7)

30°

≥0.79 (20.0)

4.96

(126.0)

0.50

(12.7)

ø0.23

(5.8)

26°

22 LS-Titan Products CA05208003E—January 2011 www.eaton.com

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Approximate Dimensions in Inches (mm)

Rotary Lever

LS(M)-_/RL

Roller Lever

LS(M)-_/L

Roller Lever, Large

LS(M)-_/LB 

Notes

Tightening torque of cover screws: 0.8 Nm ±0.2 Nm.

Setting range of 54.5 to 97.

Roller Lever, Short

LS(M)-_/LS

Adjustable Roller Lever

LS(M)-_/RLA

Angled Roller Lever

LS(M)-_/XLA

30°

1.82

(46.2)

1.59

(40.5)

0.94

(23.9)

1.06

(27.0)

0.83

(21.0)

0.20

(5.0)

ø0.55

(14.0)

1.57

(40.0)

≥0.79

(20.0) 30°

65°

0.51 (13.0)

0.13

(3.4)

1.35

(34.4)

0.50

(12.7) 0.20

(5.0)

1.22

(31.0)

30°

≥0.79

(20.0)

2.06

(52.3)

0.80

(20.4) 0.22

(5.6)

0.50

(12.7)

1.63

(41.3)

ø0.87

(22.0)

30°

≥0.79

(20.0)

≥1.54

(39.0)

1.44

(36.5)

ø0.51

(13.0)

30°

≥0.79

(20.0)

≥1.17

(29.7)

1.18

(30.0)

0.50

(12.7) 0.20

(5.0)

2.14

(54.5)

1.83

(46.4)

0.39

(10.0)

1.27

(32.2)

ø0.71–1.57

(18.0–40.0)

30° 30°

65°

≥0.79

(20.0)

≥1.75

(44.5)



1.31

(33.2)

0.51

(13.0)

1.43

(36.3)

30°

0.50

(12.7) 0.20

(5.0)

≥0.79

(20.0) ≥0.31

(8.0)

LS-Titan Products CA05208003E—January 2011 www.eaton.com 23

46.3

Limit Switches

LS-Titan Miniature DIN Switches

Approximate Dimensions in Inches (mm)

Actuating Rod

LS(M)-_/RR

Notes

LS_/RR )150

LS_/RRM )210

Approach direction, vertical.

Guide is done by customer, not included.

Maximum push-through.

LS(M)-_/OR

1.81

(46.0)

1.69

(43.0)

ø0.24

(6.0)

65°



ø 0.26

(6.5)

ø 0.16

(4.0)

1.22

(31.0)

4.33

(110.0)

0.50

(12.7)

≥0.24

(6.1)







24 LS-Titan Products CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

LS-Titan Safety Interlock Switches Contents

Description Page

LS-Titan Safety Interlock Switches

Product Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Product Selection

LS-Titan Miniature DIN Safety

Interlock Switches . . . . . . . . . . . . . . . . . . . . . . . . . 26

LS-Titan Full-Size DIN Safety

Interlock Switches . . . . . . . . . . . . . . . . . . . . . . . . . 27

LS-Titan Solenoid Safety

Interlock Switches . . . . . . . . . . . . . . . . . . . . . . . . . 27

LS-Titan Solenoid Safety

Interlock Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Technical Data and Speciﬁcations . . . . . . . . . . . . . . . . . 29

Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

LS-Titan Safety Interlock Switches

Product Description

Eaton’s LS-Titan™ safety

interlock switches have been

specifically designed for

monitoring the position of

protective guards, such as

doors, flaps, hoods and

grilles. All switches in this

family are safety-rated,

include positively opening

NC contacts, and cannot be

defeated using simple tools,

such as pliers, screwdrivers

and nails.

The LS-Titan safety interlock

family is comprised of three

types of safety switches: key

interlock, door-flap and door-

hinge switches.

Key interlock switches are a

two-piece design, made up of

the switch and key (actuator).

The key portion of the switch

is affixed to a movable door,

cover or other such guard.

The switch itself is mounted

to a rigid portion of the

machine. When the guard is

opened, the key is removed

from the switch, thereby

positively breaking the NC

contacts. This interrupts the

control circuit, stopping

machine operation.

The door-flap and door-hinge

switches are one-piece

designs, suitable for when a

key cannot be mounted in the

application. When an attempt

is made to open a protected

door hinge or flap during

operation, these switches

disconnect the power supply

to the machine or installation.

Both switches feature four-

way adjustable heads.

All LS-Titan safety interlock

switches are approved to

protect personnel and

processes.

Features

●Broad family of safety

interlock switches in

industry-standard

enclosure sizes: miniature

DIN; full-size DIN; and

larger, solenoid key

interlocks providing the

highest degree of

personnel and process

protection

●Large selection of

actuators (keys), including

those for sliding doors,

swing doors and doors that

do not close precisely

●Miniature DIN models have

a ﬁve-way adjustable head,

while full-size DIN models

have four-way adjustable

heads

●Fully safety-rated as

interlocking devices per

EN 1088, with safety

function by positive

opening contacts per

IEC/EN 60947-5-1

●Door-ﬂap and door-hinge

safety switches provide a

unique solution when

actuators (keys) cannot

be used

●IP65 degree of protection

Standards and Certiﬁcations

●UL® listed

●CSA® approved

●CCC

●Positive opening NC

contacts per

EN 60947-5-1

Safety Notes

Do not use as a mechanical

stop/shipping brace.

Any change to an original

Eaton safety position

switch is not permitted and

automatically leads to the

loss of all approvals.

Switch must never

be used as a

mechanical stop.

For the most current information

on this product, visit our web site:

www.eaton.com

LS-Titan Products CA05208003E—January 2011 www.eaton.com 25

45.1

Safety Products

LS-Titan Safety Interlock Switches

Product Identiﬁcation

Solenoid Safety Interlock Switches (LS-...ZBZ)

Notes

Basic device (see Page 27)

Spring or magnet-powered interlock

For increased personnel and

process protection

Tamper-proof

Multiple coded actuators

Contacts: 1NO-1NC or 2NC

Flat ﬂexible actuator (see Page 28)

For doors that do not close precisely

Angled ﬂexible actuator

(see Page 28)

For doors that do not close precisely

Flat actuator (see Page 28)

For sliding doors

Angled actuator (see Page 28)

For swing doors

Flat compensating actuator

(see Page 28)

For increased tolerance compensation

in the direction of door closure

Angled compensating actuator

(see Page 28)

For increased tolerance compensation

in the direction of door closure

Miniature DIN Safety

Interlock Switch (LS-...ZB)

Notes

Complete device (see Page 26)

For personnel protection

Contacts: 1NC, 1NO-1NO or 2NC

Five directions of operation possible

Actuator (see Page 26)

Included with switch

Multiple coding protection against

tampering

Door Flap Safety Switch

(LSR-...TKG)

Note

Complete device (see Page 26)

For personnel protection

Contacts: 1NO-1NC or 2NC

For swing doors with ﬁxed connection

to the door/hinge pin

Door Hinge Safety Switch

(LSR-...TS)

Note

Complete device (see Page 26)

For personnel protection

Contacts: 1NO-1NC or 2NC

For swing doors with ﬁxed connection

to the door/hinge pin

Full-Size DIN Safety

Interlock Switch (LS4-...ZB)

Notes

Complete device (see Page 27)

Narrow enclosure version

For personnel protection

Contacts: 1NO, 1NO-1NC

Actuator

Included with switch, not orderable

as a separate item

Multiple coding

For horizontal or vertical operation

















 





26 LS-Titan Products CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

Product Selection

LS-Titan Miniature DIN Safety Interlock Switches

Key Interlock Switch—LS-…ZB 

Door-Flap Switch—LSR-…TKG 

Door-Hinge Switch—LSR-…TS 

Replacement Safety Interlock Key 

Note

 For dimensions, see Page 31.

Contacts Contact Sequence Contact Travel Connection

Catalog Number

(Includes Key)

2NC with positive opening — Screw terminal LS-S02-ZB

1NO and 1NC with

positive opening

— Screw terminal LS-S11-ZB

Snap action contacts Screw terminal LS-S11S-ZB

Contacts Contact Sequence Contact Travel Connection

Catalog Number

(Includes Key)

2NC with positive opening Screw terminal LSR-S02-1-I-TKG

1NO and 1NC with

positive opening

Screw terminal LSR-S11-1-I-TKG

Contacts Contact Sequence Contact Travel Connection

Catalog Number

(Includes Key)

2NC with positive opening Screw terminal LSR-S02-1-I-TS

1NO and 1NC with

positive opening

Screw terminal LSR-S11-1-I-TS

Description Catalog Number

Replacement key for miniature DIN key interlock switches (only models LS-…ZB). LS-XB-ZB

Key Interlock Switch

14 22

Door-Flap Switch

12 22

2111

21–22

11–12

Zw = 10°

0°

5°

90°90°

14 22

21–22

13–14

Zw = 10°

0°

5°

90°90° 17°17°

Door-Hinge Switch

12 22

2111

21–22

11–12

Zw = 10°

0°

5°

90°90°

14 22

21–22

13–14

Zw = 10°

0°

5°

90°90° 17°17°

Replacement Safety

Interlock Key

LS-Titan Products CA05208003E—January 2011 www.eaton.com 27

45.1

Safety Products

LS-Titan Safety Interlock Switches

LS-Titan Full-Size DIN Safety Interlock Switches

Full-Size DIN—LS4-…ZB 

LS-Titan Solenoid Safety Interlock Switches

Switch Body without Key—LS-…ZBZ 

Notes

 For dimensions, see Page 31.



For mounting instructions, see Page 30.



Key ordered separately, see Page 28.

Contacts Contact Sequence Contact Travel Connection

Catalog Number

(Includes Key)

1NO and 1NC with

positive opening

— Screw terminal LS4-S11-1-I-ZB

Operation Operating Voltage Contacts Contact Sequence

Catalog Number

(Key not Included)

Power to unlock

(mechanical bypass present)

24 Vdc 1NO and 1NC with

positive opening

LS-S11-24DFT-ZBZ-X

2NC with positive opening LS-S02-24DFT-ZBZ-X

120 Vac (50/60 Hz) 1NO and 1NC with

positive opening

LS-S11-120AFT-ZBZ-X

2NC with positive opening LS-S02-120AFT-ZBZ-X

Power to lock

(mechanical bypass present)

24 Vdc 1NO and 1NC with

positive opening

LS-S11-24DMT-ZBZ-X

2NC with positive opening LS-S02-24DMT-ZBZ-X

120 Vac (50/60 Hz) 1NO and 1NC with

positive opening

LS-S11-120AMT-ZBZ-X

2NC with positive opening LS-S02-120AMT-ZBZ-X

Key Interlock Switch

14 22

Switch Body

without Key

13 A1 A2

14 22

11 A1 A2

12 22

13 A1 A2

14 22

11 A1 A2

12 22

13 A1 A2

14 22

11 A1 A2

12 22

13 A1 A2

14 22

11 A1 A2

12 22

28 LS-Titan Products CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

LS-Titan Solenoid Safety Interlock Keys

Keys Only—LS-…ZBZ 

Notes

 Switch body ordered separately, see Page 27.



For mounting instructions, see Page 30.

Description Application Catalog Number

Flat actuator For sliding doors LS-XG-ZBZ

Angled actuator, short For swing doors starting at 250 mm in width LS-XW-ZBZ

Angled actuator, long For swing doors starting at 250 mm in width LS-XWA-ZBZ

Angled, ﬂexible actuator For doors that do not close precisely LS-XF-ZBZ

Even, ﬂexible coasting actuator For doors that do not close precisely LS-XFG-ZBZ

Flat, compensating actuator Increased tolerance in closing direction for

inaccurately closing doors

LS-XNG-ZBZ

Angled, compensating actuator Increased tolerance in closing direction for

inaccurately closing doors

LS-XNW-ZBZ

LS-XG-ZBZ

LS-X…-ZBZ

LS-XFG-ZBZ

LS-XNG-ZBZ

LS-XF-ZBZ

LS-XNW-ZBZ

LS-Titan Products CA05208003E—January 2011 www.eaton.com 29

45.1

Safety Products

LS-Titan Safety Interlock Switches

Technical Data and Speciﬁcations

LS-Titan Safety Interlock Switches

Note

Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30.

Units LS-...ZBZ LS-...ZB LS4...ZB

General

Standards IEC/EN 60947 IEC/EN 60947 IEC/EN 60947

Climatic prooﬁng 

Ambient temperature ˚C –25… +0 –25… +70 –25… +70

Mounting position As required As required As required

Protection type IP65 IP65 IP65

Terminal capacities

Solid mm21 x (0.75–2.5)/2 x (0.75–1.5) 1 x (0.75–2.5)/2 x (0.75–1.5) 1 x (0.75–2.5)/2 x (0.75–1.5)

Flexible with ferrule mm21 x (0.75–2.5)/2 x (0.75–1.5) 1 x (0.75–2.5)/2 x (0.75–1.5) 1 x (0.75–2.5)/2 x (0.75–1.5)

Contacts/Switching Capacity

Rated impulse withstand voltage Uimp Vac 4000 6000 6000

Rated insulation voltage UiV 400 500 500

Overvoltage category/pollution degree III/3 III/3 III/3

Burden Current

AC-15

24V IeA 6 10 10

230V/240V IeA666

400V/415V IeA444

DC-13

24V IeA333

110V IeA 0.8 0.8 0.8

220V IeA 0.3 0.3 0.3

Supply frequency Hz max. 400 max. 400 max. 400

Short-circuit rating to IEC/EN 60947-5-1 Max. fuse A gG/gL 6 6 6

Repetition accuracy mm ± 0.02 ± 0.02 ± 0.02

Mechanical Variables

Lifespan

Standard-action contact Operations x 10611010

Snap-action contact Operations x 106———

Mechanical shock resistance (half-sinusoidal shock, 20 ms)

Standard-action contact g 10 25 5

Snap-action contact g — — —

Operating frequency Operations/h ) 800 ) 1800 ) 1800

Actuation

Mechanical

Actuating force at beginning/end of stroke

ZB/ZBZ (push in/pull out) N 25/15 10/5 15/20

Mechanical holding force according to GS-ET-19 (04/2004)

XG, XW N 1500 N/A N/A

XFF, XNG, XWA N 1300 N/A N/A

XF N 750 N/A N/A

XNW N 500 N/A N/A

Electromechanical

For magnet

Power consumption

at 120 Vac VA 8 N/A N/A

at 230 Vac VA 11 N/A N/A

at 24 Vdc W 8 N/A N/A

Pickup and dropout values x Us0.85–1.1 N/A N/A

Magnet duty factor % ED 100 N/A N/A

30 LS-Titan Products CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

Mounting Instructions

LS-…ZB, TKG, TS

Actuator can be repositioned

for horizontal or vertical

installation. The operating

heads can be rotated

manually in 90° steps to suit

the specified direction of

operation.

LS4-…ZB

Actuator can be repositioned

for horizontal or vertical

installation. The operating

heads can be rotated

manually in 90° steps to suit

the specified direction of

operation.

LS-…ZBZ

The operating head can be

rotated manually in 90° steps

to suit the specified level of

actuation.

In the event of a loss of

voltage, (e.g., during

commissioning), the spring-

powered LS-…-.…FT-ZBZ

can be released with a

screwdriver. The auxiliary

release mechanism must

be sealed.

LS-Titan Products CA05208003E—January 2011 www.eaton.com 31

45.1

Safety Products

LS-Titan Safety Interlock Switches

Dimensions

Approximate Dimensions in Inches (mm)

Safety Position Switches

LS…-ZB

Notes

The auxiliary release mechanism must be sealed for proper operation.

Can be used as stop with the corresponding material selection and design.

0.60

(15.2)

0.59

(15.0)

1.49

(37.8)

1.17

(29.6)

0.71

(18.0)

1.21

(30.8)

0.73

(18.5)

1.21

(30.8)

R ≤ 250°

0.24

(6.0)

0.22

(5.5)

0.06

(1.5)

0.02

(0.5)

MA=0.6 Nm 4 x 90°

1.06

(27.0)

1.42

(36.0)

2.17

(55.0)

≤ 120°

≤ 180°

1.26

(32.0)

0.78

(19.8)

Ø0.20

(Ø5.2)

6.73

(171.0)

≤ 6.81

(≤ 173.0)

5.37

(136.3)

M 20x1.5

0.87

(22.1)

0.14

(3.5)

MA=1.4 Nm

0.39

(10.0)

R ≤ 450°

LS-XWA-ZBZ

0.17–0.28

(4.3–7.2)

0.63

(16.0)

R ≤ 250°

0.004–0.12

(0.1–3.0)

+1.0

+0.5

LS-S...FT-ZBZ/_

U = 0 VU = 0 V

0.60

(15.2)

1.26

(32.0)

0.22

(5.5)

M5 x ≤ 1.38

(M5 x ≤ 35.0)

≤ 2.36

(≤ 60.0)

≤ 1.54

(≤ 39.0)





Switch must never

used as a

mechanical stop.

32 LS-Titan Products

CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

Approximate Dimensions in Inches (mm)

Actuators

LS-XG-ZBZ LS-XW-ZBZ

LS-XNW-ZBZ



LS-XFG-ZBZ

0.65

(16.5)

0.23

(5.8)

0.79

(20.0)

1.38

(35.0)

0.49

(12.5)

1.75

(44.4)

M5 M5



0.23

(5.8)

0.65

(16.5)

0.29

(7.3)

0.79

(20.0)

1.38

(35.0)

M5 M5

1.32

(33.5)

0.08

(2.0)



2.29

(58.2)

1.12

(28.5)

0.65

(16.5)

0.85

(21.5)

0.39

(10.0)

0.30

(7.5)

2.42

(61.4)

1.26

(32.0)

0.79

(20.0)

1.54

(39.0)

M5 M5



0.26

(6.5)

0.89

(22.5)

0.65

(16.5) 0.12

(3.0)

1.18 (30.0)

4.11

(104.5)

1.61

(41.0)

1.54

(39.1)

0.24

(6.0)

0.08

(2.0)

0.08

(2.0)



LS-XF-ZBZ

LS-XNG-ZBZ



LS-XWA-ZBZ



Notes



Distance to device head = 0.1–3.0 mm.



Fixing only allowed with M5 ﬁxing screw and washer according to DIN EN ISO 7093.



Pin with a 4 mm pin after mounting.

0.74

(18.9)

0.89

(22.5)

1.61

(41.0)

0.24

(6.0)

2.40

(61.0)

1.10

(28.0)

1.18

(30.0)

0.65

(16.5)

2.13

(54.2)



0.65

(16.5) 0.08

(2.0)

2.64

(67.0)

0.28

(7.0)

1.91

(48.4)

1.54

(39.0)

0.79

(20.0) 0.74

(18.8)

0.30

(7.5)

2.93

(74.5)

M5 M5



0.71

(18.0)

0.65

(16.5)

0.47

(12.0)

0.26

(6.5)

0.21

(5.4)

0.94

(24.0) 1.57

(40.0)

0.79

(20.0)

0.65

(16.5)

1.00

(25.5)

Ø0.16

(Ø4.1)

2.17

(55.1)

0.08

(2.0)



LS-Titan Products

CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

Approximate Dimensions in Inches (mm)

Safety Door Flap Switch

LSR-.../TKG

Safety Hinge Switch

LSR-.../TS

Safety Position Switches

LS...-ZB

1.35

(34.2)

0.20

(5.1)

135°

110°

0.63

(16.0)

M20

0.08

(2.0)

0.63

(16.0)

1.97

(50.0)

2.83

(72.0)

3.15

(80.0)

0.06

(1.6)

0.14

(3.5)

0.30

(7.5)

1.04

(26.5)

0.79

(20.0)

1.18

(30.0)

0.87

(22.0)

1.26

(32.0)

3.27

(83.0)

1.18

(30.0)

1.04

(26.5)

3.15

(80.0)

0.79

(20.0)

0.63

(16.0)

≤ 32

≤ 83

2.32

(59.0)

135°

M20

2.24

(56.9)

0.79

(20.0)

0.49

(12.5)

0.43

(11.0)

Ø0.12

(Ø3.0)

360°

1.18

(30.0)

0.87

(22.0)

Ø0.31

(Ø8.0)

Ø0.47

(Ø12.0)

0.21

(5.3)

0.16

(4.1)

0.79

(20.0)

0.87

(22.0)

M = 0.8 Nm

M20 x 1.5

1.21

(30.7)

1.31

(33.4)

0.89

(22.7)

0.02–0.12

(0.5–3.0)

R ≤ 200°

0.60

(15.3)

1.33

(33.7)

1.61

(41.0) 0.18

(4.5)

3.78

(96.0)

1.18

(30.0)

0.02–0.10

(0.5–2.5)

R ≤ 200°

0.98

(25.0)

M = 0.8 Nm

0.18

(4.5)

0.08

(2.0)

0.51

(13.0)

1.02

(25.8)

1.16

(29.4)

0.79

(20.0)

0.59

(15.0)

Ø0.17

(Ø4.4)

+1 +1

Ø0.35

(Ø9.0)

0.02–0.12

(0.5–3.0)

1.18

(30.0)

Switch must never

used as a

mechanical stop.

34 LS-Titan Products

CA05208003E—January 2011 www.eaton.com

45.1

Safety Products

LS-Titan Safety Interlock Switches

Approximate Dimensions in Inches (mm)

Safety Position Switches

LS4...ZB

Actuator—Included with Switch Above

0.70

(17.8)

1.32

(33.5)

4M5 x 40 M5

0.37

(9.5)

0.20

(5.0)

M = 1.4 Nm

0.67

(17.0)

0.59

(15.0)

0.14

(3.5)

1.57

(40.0)

M20 0.21

(5.3) 0.21

(5.3)

1.57

(40.0)

1.18

(30.0)

0.29

(7.3)

0.49

(12.5)

2.36

(60.0) 1.18

(30.0)

1.32

(33.5)

2.36

(60.0)

1.18

(30.0)

3.27

(83.0)

1.65

(42.0)

1.76

(44.7)

R ≤ 400°

0.31

(7.8)

0.44

(11.2)

0.63

(16.0)

0.94

(24.0)

1.97

(50.0) 0.19

(4.8)

0.02–0.35

(0.5–9.0)

0.98

(25.0)

1.32

(33.5)

0.02–0.55

(0.5–14.0)

0.94

(24.0)

2.17

(55.0)

R ≤ 400°

Switch must never

used as a

mechanical stop.

LS-Titan Products

CA05208003E—January 2011 www.eaton.com

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. CA05208003E / Z10714

January 2011

PowerChain Management is a registered

trademark of Eaton Corporation.

All other trademarks are property of their

respective owners.

Eaton’s Electrical Sector is

a global leader in power

distribution, power quality,

control and automation, and

monitoring products. When

combined with Eaton’s full-scale

engineering services, these

products provide customer-

driven PowerChain™ solutions

to serve the power system

needs of the data center,

industrial, institutional, public

sector, utility, commercial,

residential, IT, mission critical,

alternative energy and OEM

markets worldwide.

PowerChain solutions help

enterprises achieve sustainable

and competitive advantages

through proactive management

of the power system as a

strategic, integrated asset

throughout its life cycle,

resulting in enhanced safety,

greater reliability and energy

efficiency. For more information,

visit www.eaton.com/electrical.