SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 D 1.8-V and 5-V Performance D Low Offset (A Grade) D D D D D D D D D D Input Referred Voltage Noise (at 10 kHz) - 1.25 mV Max (255C) - 1.7 mV Max (-405C to 1255C) Rail-to-Rail Output Swing Wide Common-Mode Input Voltage Range . . . -0.2 V to (V+ - 0.5 V) Input Bias Current . . . 1 pA (Typ) Input Offset Voltage . . . 0.3 mV (Typ) Low Supply Current . . . 70 A/Channel Low Shutdown Current . . . 10 pA (Typ) Gain Bandwidth . . . 2.3 MHz (Typ) Slew Rate . . . 0.9 V/s (Typ) Turn-On Time From Shutdown . . . 5 s (Typ) TLV341 . . . DBV (SOT-23) OR DCK (SC-70) PACKAGE (TOP VIEW) IN+ GND IN- 1 6 2 5 3 4 D D . . . 20 nV//Hz ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) Applications - Cordless/Cellular Phones - Consumer Electronics (Laptops, PDAs) - Audio Pre-Amp for Voice - Portable/Battery-Powered Electronic Equipment - Supply Current Monitoring - Battery Monitoring - Buffers - Filters - Drivers TLV342 . . . D (SOIC) OR DGK (MSOP) PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ GND V+ SHDN OUT 1 8 2 7 3 6 4 5 V+ 2OUT 2IN- 2IN+ TLV344 . . . D (SOIC) OR PW (TSSOP) PACKAGE (TOP VIEW) TLV341 . . . DRL (SOT-563) PACKAGE (TOP VIEW) GND IN+ IN- 1 6 2 5 3 4 1OUT 1IN- 1IN+ V+ 2IN+ 2IN- 2OUT V+ SHDN OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ GND 3IN+ 3IN- 3OUT description/ordering information The TLV341, TLV342, and TLV344 are single, dual, and quad CMOS operational amplifiers, respectively, with low-voltage, low-power, and rail-to-rail output swing capabilities. The PMOS input stage offers an ultra-low input bias current of 1 pA (typ) and an offset voltage of 0.3 mV (typ). For applications requiring excellent dc precision, the A grade (TLV34xA) has a low offset voltage of 1.25 mV (max) at 25C. These single-supply amplifiers are designed specifically for ultra-low-voltage (1.5-V to 5-V) operation, with a common-mode input voltage range that typically extends from -0.2 V to 0.5 V from the positive supply rail. Additional features include 20-nV/Hz voltage noise at 10 kHz, 2.3-MHz unity-gain bandwidth, and 0.9-V/s slew rate. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2005, Texas Instruments Incorporated !" # $%&" !# '%()$!" *!"&+ *%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"# #"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+ POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 description/ordering information (continued) The TLV341 (single) also offers a shutdown (SHDN) pin that can be used to disable the device. In shutdown mode, the supply current is reduced to 45 pA (typ). Offered in both the SOT-23 and smaller SC-70 packages, the TLV341 is suitable for the most space-constrained applications. The dual TLV342 is offered in the standard SOIC and MSOP packages. An extended industrial temperature range from -40C to 125C makes the TLV34x suitable in a wide variety of commercial and industrial applications. ORDERING INFORMATION TA MAX VIO (255C) SOT-23 - DBV Single SC-70 - DCK SOT-563 - DRL Standard grade: 4 mV SOIC - D Dual MSOP/VSSOP - DGK SOIC - D Quad TSSOP - PW -40C -40 C to 125 125C C SOT-23 - DBV Single SC-70 - DCK SOIC - D A grade: 1.25 mV ORDERABLE PART NUMBER PACKAGE Dual MSOP/VSSOP - DGK SOIC - D Quad TSSOP - PW Reel of 3000 TLV341IDBVR Reel of 250 TLV341IDBVT Reel of 3000 TLV341IDCKR Reel of 250 TLV341IDCKT Reel of 4000 TLV341IDRLR Tube of 75 TLV342ID Reel of 2500 TLV342IDR Reel of 2500 TLV342IDGKR Reel of 250 TLV342IDGKT Tube of 50 TLV344ID Reel of 2500 TLV344IDR Tube of 90 TLV344IPWR Reel of 2000 TLV344IPWR Reel of 3000 TLV341AIDBVR Reel of 250 TLV341AIDBVT Reel of 3000 TLV341AIDCKR Reel of 250 TLV341AIDCKT Tube of 75 TLV342AID Reel of 2500 TLV342AIDR Reel of 2500 TLV342AIDGKR Reel of 250 TLV342AIDGKT Tube of 50 TLV344AID Reel of 2500 TLV344AIDR Tube of 90 TLV344AIPWR Reel of 2000 TLV344AIPWR TOP-SIDE MARKING YC9_ Y4_ Y4_ TY342 PREVIEW PREVIEW PREVIEW YCG_ Y5_ TY342A PREVIEW PREVIEW PREVIEW Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK/DRL: The actual top-side marking has one additional character that designates the assembly/test site. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 symbol (each amplifier) V+ V+ - VO - VI + + C = 200 pF Sample Clock absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, V+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5.5 V Package thermal impedance, JA (see Notes 3 and 4): D package (8 pin) . . . . . . . . . . . . . . . . . . . . . . 97C/W D package (14 pin) . . . . . . . . . . . . . . . . . . . . . 86C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . . 165C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . 259C/W DGK package . . . . . . . . . . . . . . . . . . . . . . . . 172C/W DRL package . . . . . . . . . . . . . . . . . . . . . . . . 142C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values (except differential voltages and V+ specified for the measurement of IOS) are with respect to the network GND. 2. Differential voltages are at IN+ with respect to IN-. 3. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Selecting the maximum of 150C can affect reliability. 4. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions V+ TA MIN MAX Supply voltage (single-supply operation) 1.5 5.5 UNIT V Operating free-air temperature -40 125 C ESD protection TEST CONDITIONS Human-Body Model Machine Model POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP UNIT 2000 V 200 V 3 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 electrical characteristics, V+ = 1.8 V, GND = 0, VIC = VO = V+/2, RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS TA 25C Standard grade VIO IO 0.3 0.3 1.25 0C to 125C 0.3 1.5 -40C to 125C 0.3 1.7 Full range 1.9 Average temperature coefficient of input offset voltage IIO 1 375 3000 6.6 25C 60 CMRR Common-mode rejection ratio 0 VICR 1.2 V Full range 50 75 Supply-voltage rejection ratio 1.8 V V+ 5 V 25C kSVR Full range 65 VICR Common-mode input voltage range CMRR 60 dB 25C 0 25C 70 Full range 60 25C 65 Full range 55 AV Large-signal voltage gain (see Note 5) RL = 10 k to 1.35 V RL = 2 k to 1.35 V 25C Low level RL = 2 k to 0.9 V Output swing (delta from supply rails) RL = 10 k to 0.9 V 95 dB 1.2 V 110 dB 100 50 75 25 Full range 50 75 14 Full range 20 mV 25 25C High level fA dB 22 25C Low level pA 85 Full range 25C High level VO 100 -40C to 85C 25C mV mV/C -40C to 125C Input offset current UNIT 4 25C Input offset voltage Input bias current MAX 4.5 25C IIB TYP Full range A grade aV MIN 7 Full range 20 25 25C 70 150 A mA ICC Supply current (per channel) IOS Output short-circuit current SR Slew rate RL = 10 k, Note 6 25C 0.9 V/ms GBW Unity-gain bandwidth RL = 100 k, CL = 200 pF 25C 2.2 MHz Fm Gm Phase margin RL = 100 k, CL = 20 pF 25C 55 Gain margin RL = 100 k, CL = 20 pF 25C 15 dB Vn In Equivalent input noise voltage f = 1 kHz 25C 33 nV/Hz Equivalent input noise current f = 1 kHz 25C 0.001 pA/Hz THD Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 , VI = 1 VPP 25C 0.015 % Full range Sourcing 25C Sinking 200 6 12 10 20 mA Typical values represent the most likely parametric norm. NOTES: 5. GND + 0.2 V VO VCC+ - 0.2 V 6. Connected as voltage follower with 2-VPP step input. Number specified is the slower of the positive and negative slew rates. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 shutdown characteristics, V+ = 1.8 V, GND = 0, VIC = VO = V+/2, RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS ICC(SHDN) Supply current in shutdown mode t(on) Amplifier turn-on time VSD Shutdown pin voltage range VSD = 0 V TA 25C TYP 0.01 Full range 25C ON mode MAX UNIT 1 mA 1.5 mA ms 5 1.5 to 1.8 Shutdown mode POST OFFICE BOX 655303 MIN * DALLAS, TEXAS 75265 25C 0 to 0.5 V 5 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 electrical characteristics, V+ = 5 V, GND = 0, VIC = VO = V+/2, RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS Standard grade VIO IO MIN 0.3 Input offset voltage Average temperature coefficient of input offset voltage IIO Input bias current Input offset current 0.3 1.25 0C to 125C 0.3 1.5 -40C to 125C 0.3 1.7 Full range 1.9 1 375 3000 6.6 75 0 VICR 4.4 V Full range 70 75 Supply-voltage rejection ratio 1.8 V V+ 5 V 25C kSVR Full range 65 VICR Common-mode input voltage range CMRR 70 dB 25C 0 -0.2 to 4.5 25C 80 110 Full range 70 25C 75 Full range 60 RL = 2 k to 2.5 V 25C Low level RL = 2 k to 2.5 V VO RL = 10 k to 2.5 V dB 4.4 V dB 105 60 85 25 Full range 60 85 18 Full range 30 mV 40 25C High level 95 40 25C Low level fA dB Full range 25C High level Output swing (delta from supply voltage) pA 90 Common-mode rejection ratio Large-signal voltage gain (see Note 5) 200 -40C to 85C 25C mV mV/C -40C to 125C CMRR AV UNIT 4 25C 25C RL = 10 k to 2.5 V MAX 4.5 25C IIB TYP Full range A grade aV TA 25C 7 Full range 15 20 25C 75 150 A mA ICC Supply current (per channel) IOS Output short-circuit current SR Slew rate RL = 10 k, Note 6 25C 1 V/ms GBW Unity-gain bandwidth RL = 10 k, CL = 200 pF 25C 2.3 MHz Fm Gm Phase margin RL = 100 k, CL = 20 pF 25C 55 Gain margin RL = 100 k, CL = 20 pF 25C 15 dB Vn In Equivalent input noise voltage f = 1 kHz 25C 33 nV/Hz Equivalent input noise current f = 1 kHz 25C 0.001 pA/Hz THD Total harmonic distortion f = 1 kHz, AV = 1, RL = 600 , VI = 1 VPP 25C 0.012 % Full range Sourcing 25C Sinking 200 60 113 80 115 mA Typical values represent the most likely parametric norm. NOTES: 5. GND + 0.2 V VO VCC+ - 0.2 V 6. Connected as voltage follower with 2-VPP step input. Number specified is the slower of the positive and negative slew rates. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 shutdown characteristics, V+ = 5 V, GND = 0, VIC = VO = V+/2, RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS ICC(SHDN) Supply current in shutdown mode t(on) Amplifier turn-on time VSD Shutdown pin voltage range VSD = 0 V TA 25C TYP 0.01 Full range 25C ON mode Shutdown mode POST OFFICE BOX 655303 MIN * DALLAS, TEXAS 75265 25C MAX 1 1.5 UNIT A mA ms 5 3.1 to 5 4.5 to 5 0 to 1 0 to 0.8 V 7 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS INPUT BIAS CURRENT vs TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE 130 1,000 V+ = 5 V 110 IIB - Input Bias Current - pA ICC - Supply Current - A 120 125C 100 90 85C 80 25C 70 60 -40C 50 100 10 1 40 30 1.5 2 2.5 3 3.5 4 4.5 0.1 -40 -20 5 VCC - Supply Voltage - V 0 20 40 60 80 100 120 TA - Free-Air Temperature - C Figure 2 Figure 1 OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE 35 7 RL = 2 k VO - Output Swing From Supply Voltage - mV VO - Output Swing From Supply Voltage - mV OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE 30 Negative Swing 25 20 Positive Swing 15 10 1.5 2 2.5 3 3.5 4 4.5 5 RL = 10 k 6.5 6 Negative Swing 5.5 5 4.5 4 Positive Swing 3.5 3 1.5 2 VCC - Supply Voltage - V 2.5 3 Figure 4 POST OFFICE BOX 655303 3.5 4 VCC - Supply Voltage - V Figure 3 8 140 * DALLAS, TEXAS 75265 4.5 5 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS SOURCE CURRENT vs OUTPUT VOLTAGE SOURCE CURRENT vs OUTPUT VOLTAGE 1000 1000 V+ = 2.7 V V+ = 5 V -40C 100 -40C IS - Source Current - mA IS - Source Current - mA 100 25C 10 85C 1 125C 10 25C 85C 1 125C 0.1 0.1 0.01 0.001 0.01 0.1 1 0.01 0.001 10 VO - Output Voltage Referenced to V+ (V) 0.01 Figure 5 1000 V+ = 5 V 100 100 -40C -40C IS - Sink Current - mA IS - Sink Current - mA 10 SINK CURRENT vs OUTPUT VOLTAGE V+ = 2.7 V 10 25C 85C 1 125C 0.1 0.01 0.001 1 Figure 6 SINK CURRENT vs OUTPUT VOLTAGE 1000 0.1 VO - Output Voltage Referenced to V+ (V) 10 25C 85C 1 125C 0.1 0.01 0.1 1 10 VO - Output Voltage Referenced to V- (V) 0.01 0.001 0.01 0.1 1 10 VO - Output Voltage Referenced to V- (V) Figure 7 Figure 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS OFFSET VOLTAGE vs COMMON-MODE VOLTAGE OFFSET VOLTAGE vs COMMON-MODE VOLTAGE 1 1 V+ = 5 V 0.5 0.5 0 0 VIO - Offset Voltage - mV VIO - Offset Voltage - mV V+ = 2.7 V -0.5 -1 125C -1.5 85C -2 25C -0.5 -1 125C 85C -1.5 25C -2 -40C -40C -2.5 -2.5 -3 -0.2 0.8 1.8 -3 -0.2 2.8 VIC - Common-Mode Voltage - V 0.8 1.8 2.8 3.8 Figure 9 INPUT VOLTAGE vs OUTPUT VOLTAGE 300 300 V+ /GND = 1.35 V V+ /GND = 2.5 V VI - Input Voltage - V VI - Input Voltage - V 200 RL = 2 k 100 0 RL = 10 k 200 100 0 -100 -100 -200 -200 -2 -1 0 1 VO - Output Voltage - V 2 3 RL = 2 k -300 -1.5 RL = 10 k -1 -0.5 0 Figure 12 POST OFFICE BOX 655303 0.5 VO - Output Voltage - V Figure 11 10 5.8 Figure 10 INPUT VOLTAGE vs OUTPUT VOLTAGE -300 -3 4.8 VIC - Common-Mode Voltage - V * DALLAS, TEXAS 75265 1 1.5 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS SLEW RATE vs TEMPERATURE SLEW RATE vs SUPPLY VOLTAGE 2.5 1.9 2.3 Falling Edge 1.7 SR - Slew Rate - V/s 2.1 SR - Slew Rate - V/s 1.5 1.3 Rising Edge 1.1 0.9 0.5 1.5 2 1.9 Falling Edge 1.7 1.5 1.3 Rising Edge 1.1 0.9 RL = 10 k AV = 1 VI = 0.8 VPP for V+ < 2.7 V VI = 2 VPP for V+ > 2.7 V 0.7 RL = 10 k AV = 1 VI = 2 VPP V+ = 2.7 V 0.7 2.5 3 3.5 4 VCC - Supply Voltage - V 4.5 0.5 -40 -20 5 0 20 40 60 80 100 120 140 VCC - Supply Voltage - V Figure 14 Figure 13 CMRR vs FREQUENCY SLEW RATE vs TEMPERATURE 100 2.5 2.3 1.9 90 70 Falling Edge 1.7 1.5 1.3 Rising Edge 60 50 30 0.9 20 0.7 10 0 20 40 60 80 100 120 140 VCC - Supply Voltage - V 2.7 V 40 1.1 0.5 -40 -20 5V 80 Gain - dB SR - Slew Rate - V/s 2.1 RL = 10 k AV = 1 VI = 2 VPP V+ = 5 V VI = V+ /2 RL = 5 k 0 100 1K Figure 15 10K 100K f - Frequency - Hz 1M Figure 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS INPUT VOLTAGE NOISE vs FREQUENCY PSRR vs FREQUENCY 100 220 +PSRR (2.7 V) 200 90 VI - Input Voltage Noise - nV/ Hz -PSRR (2.7 V) 80 Gain - dB 70 60 -PSRR (5 V) +PSRR (5 V) 50 40 30 20 10 0 100 180 160 140 120 100 80 5V 2.7 V 60 40 20 RL = 5 k 0 1K 10K 100K f - Frequency - Hz 1M 10M 10 100 Figure 17 TOTAL HARMONIC DISTORTION + NOISE vs OUTPUT VOLTAGE THD+N - Total Harmonic Distortion + Noise - % THD+N - Total Harmonic Distortion + Noise - % 10 RL = 600 VO = 1 VPP for V+ = 2.7 V VO = 2.5 VPP for V+ = 5 V 1 5V AV = 10 2.7 V AV = 10 0.1 2.7 V AV = 1 0.01 5V AV = 1 0.001 0.0001 10 100 1K 10K f - Frequency - Hz 100K f = 10 kHz RL = 600 5V AV = 10 1 2.7 V AV = 10 0.1 5V AV = 1 0.01 0.001 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2.7 V AV = 1 0.01 0.1 1 VO - Output Voltage - VPP Figure 20 Figure 19 12 10K Figure 18 TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY 10 1K f - Frequency - Hz 10 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS FREQUENCY RESPONSE vs TEMPERATURE 160 140 V+ = 5 V RL = 2 k Phase 120 140 100 Gain - dB 80 -40C Gain 60 80 -40C 25C 60 40 125C 20 -20 40 25C 125C 0 Phase Margin - Deg 120 100 20 0 1 10 100 1K 10K f - Frequency - kHz Figure 21 FREQUENCY RESPONSE vs RL 140 120 140 Phase 120 100 80 RL = 600 60 RL = 2 k Gain RL = 100 k 80 60 40 RL = 100 k Phase Margin - Deg 100 Gain - dB 160 V+ = 2.7 V Closed-Loop Gain = 60 dB 40 20 RL = 600 RL = 2 k 0 20 0 -20 1 10 100 1K 10K f - Frequency - kHz Figure 22 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS FREQUENCY RESPONSE vs RL 140 120 160 V+ = 5 V Closed-Loop Gain = 60 dB Phase 140 Gain - dB 100 80 RL = 600 Gain 60 80 RL = 2 k RL = 100 k 60 40 RL = 100 k 20 40 RL = 2 k RL = 600 0 -20 Phase Margin - Deg 120 100 20 0 1 10 100 f - Frequency - kHz 1K 10K Figure 23 FREQUENCY RESPONSE vs CL 140 120 100 Phase V+ = 5 V RL = 600 Closed-Loop Gain = 60 dB CL = 0 pF 100 80 Gain - dB 80 40 CL = 500 pF Gain CL = 1000 pF 60 20 0 40 CL = 0 pF 20 -40 0 CL = 500 pF -20 CL = 1000 pF -40 1 10 100 f - Frequency - kHz 1K Figure 24 14 -20 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 -60 CL = 100 pF 10K -80 Phase Margin - Deg 60 CL = 100 pF SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS LARGE-SIGNAL NONINVERTING RESPONSE SMALL-SIGNAL NONINVERTING RESPONSE Input Input TA = -40C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 0.05 -0.15 0 -0.2 -0.05 5 1 4 0 -1 3 2 TA = -40C RL = 2 k V+/GND = 2.5 V 1 -3 0 -4 -5 -1 Output -0.1 4 s/div" Output -2 -0.25 4 s/div" LARGE-SIGNAL NONINVERTING RESPONSE SMALL-SIGNAL NONINVERTING RESPONSE 0.1 Input TA = 25C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 0.05 -0.15 0 -0.2 -0.05 VO - Output Voltage - V 0 VI - Input Voltage - V VO - Output Voltage - V 5 1 4 0 0.05 0.15 3 2 -1 TA = 25C RL = 2 k V+/GND = 2.5 V -2 1 -3 0 -4 -1 -5 Output Output -0.1 2 6 Input 0.2 0.1 -6 Figure 26 Figure 25 0.25 -2 VI - Input Voltage - V 0.1 VO - Output Voltage - V VO - Output Voltage - V 0 0.15 VI - Input Voltage - V 0.05 0.2 VI - Input Voltage - V 0.25 2 6 0.1 4 s/div" -0.25 -2 Figure 27 4 s/div" -6 Figure 28 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS LARGE-SIGNAL NONINVERTING RESPONSE SMALL-SIGNAL NONINVERTING RESPONSE Input TA = 125C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 0.05 -0.15 0 -0.2 -0.05 VO - Output Voltage - V 5 1 4 0 -1 3 2 TA = 125C RL = 2 k V+/GND = 2.5 V 1 -3 0 -4 -5 -1 Output Output -0.1 -0.25 4 s/div" -2 4 s/div" SMALL-SIGNAL INVERTING RESPONSE LARGE-SIGNAL INVERTING RESPONSE 0.1 6 0.05 5 1 4 0 2 Input 0.1 0.05 TA = -40C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 -0.15 0 -0.2 -0.05 VO - Output Voltage - V VO - Output Voltage - V 0 0.15 VI - Input Voltage - V Input 0.2 3 2 -1 TA = -40C RL = 2 k V+/GND = 2.5 V 4 s/div" -0.25 -3 0 -4 -1 -5 Output -2 4 s/div" Figure 32 Figure 31 16 -2 1 Output -0.1 -6 Figure 30 Figure 29 0.25 -2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 -6 VI - Input Voltage - V VO - Output Voltage - V 0 0.15 VI - Input Voltage - V 0.05 VI - Input Voltage - V Input 0.2 0.1 2 6 0.1 0.25 SLVS568B - JANUARY 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS LARGE-SIGNAL INVERTING RESPONSE SMALL-SIGNAL INVERTING RESPONSE 0.25 2 0.1 6 0.05 5 1 4 0 TA = 25C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 0.05 -0.15 0 -0.2 -0.05 VO - Output Voltage - V -1 3 2 TA = 25C RL = 2 k V+/GND = 2.5 V 1 -3 0 -4 -5 -1 Output -0.1 Output -0.25 4 s/div" -2 4 s/div" LARGE-SIGNAL INVERTING RESPONSE SMALL-SIGNAL INVERTING RESPONSE Input Input TA = 125C RL = 2 k V+/GND = 2.5 V -0.05 -0.1 0.05 -0.15 0 -0.2 -0.05 VO - Output Voltage - V VO - Output Voltage - V 0 VI - Input Voltage - V 0.05 0.15 5 1 4 0 -1 3 2 TA = 125C RL = 2 k V+/GND = 2.5 V -2 1 -3 0 -4 -5 -1 Output Output -0.1 2 6 0.1 0.2 0.1 -6 Figure 34 Figure 33 0.25 -2 VI - Input Voltage - V 0.1 VI - Input Voltage - V VO - Output Voltage - V 0 0.15 VI - Input Voltage - V Input Input 0.2 -0.25 -6 -2 4 s/div" 4 s/div" Figure 36 Figure 35 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 PACKAGE OPTION ADDENDUM www.ti.com 24-Feb-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV341AIDBVR ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDBVRE4 ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDBVT ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDBVTE4 ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDCKR ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDCKRE4 ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDCKT ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341AIDCKTE4 ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDBVR ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDBVRE4 ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDBVT ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDBVTE4 ACTIVE SOT-23 DBV 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDCKR ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDCKRE4 ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDCKT ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDCKTE4 ACTIVE SC70 DCK 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDRLR ACTIVE SOP DRL 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV341IDRLRG4 ACTIVE SOP DRL 6 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342AID ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342AIDE4 ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342AIDR ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342AIDRE4 ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342ID ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342IDE4 ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV342IDR ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 24-Feb-2006 Orderable Device Status (1) Package Type Package Drawing TLV342IDRE4 ACTIVE SOIC D Pins Package Eco Plan (2) Qty 8 Green (RoHS & no Sb/Br) Lead/Ball Finish CU NIPDAU MSL Peak Temp (3) Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated