FUJITSU SEMICONDUCTOR DATA SHEET DS04-23117-1E _ iE @ DESCRIPTION The F5-K2/F6-K2 series of SAW band pass filters applying to the frequen stability by using single crystal, (LiTaQs) with a large electromechanic provide low insertion loss and wide band width in passband by taking: ladder type. The F5/F6-K2 series are housed in very small package (3.0 Compared to our F5CH-L2 series (3.8 mm square package}: The F5/F6-K2 series of SAW filters are suitable for interstage frequency range 700 to 1700 MHz. Standard devices ar: standards. @ FEATURES * Low insertion loss and high stopband attenua Wide pass band width * Ultra compact and light package * External matching circuits are * Surface mount package (SM} Standard devices are avail (AMPS/CDMA/TDM Et communication standards 0, Japan CDMA, PDC 1.5 G) m@ PACKAGE to 1700 MHz realize high contributes to save mounting space. ies is 40% (shade area) smaller. mebile communication systems in the * AMPS/CDMA/TDMA, EGSM and JapaneseF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee @ PIN ASSIGNMENT Pin No. Pin name | Description Input Pin Output Pin Rating SymbolF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee m@ RECOMMENDED OPERATING CONDITIONS Parameter Symbol Value Unit Min. Max. Operating temperature Ta -30 +85 C WARNING: Recommended operating conditions are normal operating ranges for the piezoelectric device. All the device's electrical characteristics are warranted when operated within these ranges. Always use piezoelectric devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representative beforehand. @ STANDARD FREQUENCIES Center freq. B/w Part System (MHz) q (MHz) symbol Part number Remarks r 836.5 25 25 FAR-F5CE-836M50-K225 | Low loss type x AMPS/IS-95/ 836.5 25 05 FAR-F5CE-836M50-K205 | High Att. type IS-136 R 881.5 25 06 FAR-F5CE-881M50-K206_ | Low loss type x 881.5 25 10 FAR-F5CE-881M50-K210 | High Att. type EGSM Rx 942.5 35 16 FAR-F5CE-942M50-K216 PDC800 TX 950.0 20 01 FAR-F5CE-950M00-K201 (20 MHz passband 820.0 20 02 FAR-F5CE-820M00-K202_ | Low loss type width standard) Rx ; 820.0 20 04 FAR-F5CE-820M00-K204 | High Att. type PDC800 942.5 35 og FAR-F5CE-942M50-K209 | Low loss type (35 MHz passband | Tx width standard) 942.5 35 08 FAR-F5CE-941M50-K208 | High Att. type r 906.0 38 11 FAR-F5CE-906M00-K211__| Low loss type X J-CDMA 906.0 38 15 FAR-F5CE-S06MO00-K215 | High Att. type Rx 851.0 38 12 FAR-F5CE-851M00-K212 Tx 1441.0 24 20 FAR-F6CE-1G4410-K220 PDC1.5G Rx 1489.0 a4 21 FAR-F6CE-1G4890-K221F5/F6 Series (K2 type) @ ELECTRICAL CHARACTERISTICS 1. AMPS/IS-95/IS-136 (Tx) Low Loss type Part number: FAR-F5CE-836M50-K225 SSE SUSE SSS ES SUS SUES SESS STEELE UESuESEEESSESSE STS UEEES SSS S SE (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 824 to 849 MHz _ 2.0 2.5 dB Inband ripple _ 824 to 849 MHz _ 0.9 1.5 dB _ DC to 800 MHz 20 23 _ dB ate 869 to 894 MHz 23 | 30 | | cB 894 to 2000 MHz 20 25 dB Inband VSWR _ 824 to 849 MHz 2.6 2.9 _ 2. AMPS/IS-95/IS-136 (Tx) High Attenuation type Part number: FAR-F5CE-836M50-K205 (Ta = 30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. Insertion loss IL 824 to 849 MHz _ 27 3.5 dB Inband ripple 824 to 849 MHz 1.0 2.0 dB _ DC to 800 MHz 28 30 _ dB soit in 869 to 1049 MHz 30 | 33 | | oB _ 1049 to 2000 MHz 25 35 _ dB Inband VSWR _ 824 to 849 MHz _ 2.0 2.5 _ 3. AMPS/IS-95/IS-136 (Rx) Low Loss type Part number: FAR-F5CE-881M50-K206 (Ta = 30 to +85C) Value Parameter Symbol Conditions Unit Remarks Min. | Typ. | Max. Insertion loss IL 869 to 894 MHz 2.0 3.0 dB Inband ripple _ 869 to 894 MHz _ 0.6 2.0 dB DC to 848 MHz 20 25 dB Absolute 914 to 939 MHz 20 30 | cB attenuation 939 to 1049 MHz 25 | 30 | | cB 1049 to 2000 MHz 20 30 _ dB Inband VSWR _ 869 to 894 MHz 2.2 2.5 _F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 4. AMPS/IS-95/1S-136 (Rx) High Attenuation type Part number: FAR-F5CE-881M50-K210 (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 869 to 894 MHz _ 2.7 3.5 dB Inband ripple _ 869 to 894 MHz _ 1.0 2.0 dB DC to 849 MHz 30 32 dB Absolute 914 to 939 MHz 20 38 | cB attenuation 939 to 1049 MHz 30 | 35 | | oB _ 1049 to 2000 MHz 25 30 _ dB Inband VSWR 869 to 894 MHz 2.0 2.5 5. EGSM (Rx) Part number: FAR-F5CE-942M50-K216 (Ta = 30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. Insertion loss IL 925 to 960 MHz 2.5 3.5 dB Inband ripple _ 925 to 960 MHz _ 1.0 2.0 dB DC te 800 MHz 20 25 dB 800 to 890 MHz 30 35 cB _ 890 to 905 MHz 20 30 _ cB 905 to. 915 MHz 11 20 dB | Ta =-30 to +25C 7 dB | Ta=+25 10 +85C ationuation _ 980 to 1000 MHz 20 30 cB 1000 to 1200 MHz 30 35 cB 1200 to 1550 MHz 25 30 cB 1550 to 1950 MHz 20 23 cB 1950 to 2800 MHz 15 20 cB 2800 to 3000 MHz 10 16 cB Inband VSWR _ 925 to 960 MHz _ 2.6 28 _F5/F6 Series (K2 type) 6. PDC800 (Tx) Part number: FAR-F5CE-950M00-K201 SSE SUSE SSS ES SUS SUES SESS STEELE UESuESEEESSESSE STS UEEES SSS S SE (Ta = -30 to +85C) Symbol Conditions Value in. | Typ. Unit Remarks IL 940 to 960 MHz 3.0 dB 940 to 960 MHz 1.5 NM) & on dB DC to 680 MHz 30 36 dB 680 to 696 MHz 33 37 dB 810 to 830 MHz 35 40 dB 1015 to 1106 MHz 40 44 dB 1106 to 2000 MHz 30 37 dB Inband VSWR 940 to 960 MHz 1.8 N wn 7. PDC800 (Rx) Low Loss type Part number: FAR-F5CE-820M00-K202 (Ta = -30 to +85C) Symbol Conditions Value in. | Typ. Unit Remarks IL 810 to 830 MHz 2.1 dB 810 to 830 MHz 1.4 dB DC to 700 MHz 20 a4 dB 875 to 1070 MHz 25 28 dB 1070 to 1090 MHz 26 30 dB 1090 to 2000 MHz 20 28 dB Inband VSWR 810 to 830 MHz 1.7F5/F6 Series (K2 type) Cerro eee ee ee 8. PDC800 (Rx) High Attenuation type Part number: FAR-F5CE-820M00-K204 (Ta = -30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. Insertion loss IL 810 to 830 MHz _ 3.0 3.5 dB Inband ripple _ 810 to 830 MHz _ 1.5 2.0 dB _ DC to 130 MHz 35 41 _ cB 130 to 760 MHz 30 34 dB sole on = 855 to 875 MHz 35 | 38 | | oB 875 to 1090 MHz 33 38 dB 1090 to 2000 MHz 30 38 dB Inband VSWR _ 810 to 830 MHz _ 2.0 2.5 _ 9. PDC800 (35 MHz B/W) (Tx) Low Loss type Part number: FAR-F5CE-942M50-K209 (Ta = -30 to +85C) Value Parameter Symbol Conditions Unit Remarks Min. | Typ. | Max. Insertion loss IL 925 to 960 MHz 2.3 3.0 dB Inband ripple _ 925 to 960 MHz _ 0.5 1.5 dB DC to 775 MHz 20 25 dB _ 775 to 887 MHz 30 33 _ dB aso ute in 1000 to 1185 MHz 35 | 33 | | oB 1225 to 1260 MHz 30 35 dB 1260 to 2000 MHz 20 23 dB Inband VSWR 925 to 960 MHz 2.4 2.8 F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 10. PDC800 (35 MHz B/W) (Tx) High Attenuation type Part number: FAR-F5CE-941M50-K208 (Ta = -30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. 3.0 3.5 dB | Ta=4+25+4+ 2C Insertion loss IL 925 to 960 MHz 4.0 cB | Ta =-30 to +85C ; 0.8 1.5 dB | Ta=+25+ 2C Inband ripple _ 925 to 960 MHz 2.0 dB | Ta=-30 10 +85C DC to 775 MHz 30 32 dB 775 to 887 MHz 35 39 dB Absolute 1000 to 1110 MHz 40 45 cB attenuation 1150 to 1185 MHz 38 42 | oB 1225 to 1260 MHz 33 38 dB 1260 to 2000 MHz 20 25 dB Inband VSWR _ 925 to 960 MHz 2.8 3.2 _ 11. J-CDMA (Tx) Low Loss type Part number: FAR-F5CE-906M00-K211 (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 887 to 925 MHz _ 2.5 3.5 dB Inband ripple _ 887 to 925 MHz _ 1.0 2.0 dB DBC to 720 MHz 17 20 dB _ 720 to 800 MHz 20 22 _ dB _ 832 to 870 MHz 28 30 _ dB as tite on = 940 to 942 MHz 15 | 2 | | @ _ 942 to 950 MHz 20 30 _ dB _ 950 to 2000 MHz 20 23 _ dB 2000 to 3000 MHz 15 17 dB Inband VSWR 887 to 925 MHz 2.3 2.5 F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 12. J-CDMA (Tx) High Attenuation type Part number: FAR-F5CE-906M00-K215 (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 887 to 925 MHz _ 3.0 45 dB Inband ripple _ 887 to 925 MHz _ 1.5 3.0 dB _ DC to 720 MHz 25 26 _ dB _ 720 to 800 MHz 25 30 _ dB 832 to 870 MHz 30 35 dB aps olte a 940 to 942 MHz 20 | 25 | | oB _ 942 to 950 MHz 25 30 _ dB _ 950 to 2000 MHz 20 25 _ dB _ 2000 to 3000 MHz 15 20 _ dB Inband VSWR 887 to 925 MHz _ 3.0 3.5 13. J-CDMA (Rx) Part number: FAR-F5CE-851M00-K212 (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 832 to 870 MHz _ 2.5 3.5 dB Inband ripple _ 832 to 870 MHz _ 1.0 2.0 dB DBC to 170 MHz 20 a4 dB _ 170 to 720 MHz 18 20 _ dB _ 720 to 770 MHz 20 22 _ dB _ 770 to 815 MHz 25 27 _ dB attenuation _ 818 MHz 15 40 dB _ 887 to 897 MHz 20 30 _ dB 897 to 925 MHz 23 25 dB _ 925 to 1100 MHz 22 24 _ dB _ 1100 to 2000 MHz 20 24 _ dB Inband VSWR 832 to 870 MHz 2.7 3.0 F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 14. PDC1.5 G (Tx) Part number: FAR-F6CE-1G4410-K220 (Ta = -30 to +85C) Parameter Symbol Conditions - Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 1429 to 1453 MHz _ 2.2 3.2 dB Inband ripple _ 1429 to 1453 MHz _ 1.0 2.0 dB DC to 1380 MHz 25 27 dB Absolute 1477 to 1501 MHz 8 18 dB attenuation 1501 to 1900 MHz 30 | 32 | | oB _ 1900 to 2906 MHz 18 28 _ dB Inband VSWR 1429 to 1453 MHz 2.1 2.5 15. PDC1.5 G (Tx) Part number: FAR-F6CE-1G4890-K221 (Ta = 30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. Insertion loss IL 1447 to 1501 MHz _ 2.5 3.0 dB Inband ripple _ 1447 to 1501 MHz _ 1.0 2.0 dB DC to 1429 MHz 25 28 cB 1429 to 1453 MHz 10 25 cB Absolute 1542 to 1566 MHz 20 | 28 | | cB attenuation 1566 to 1900 MHz 30 33 cB 1900 to 3000 MHz 20 29 cB Inband VSWR 1477 to 1501 MHz 2.4 2.7 10F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee @ TYPICAL CHARACTERISTICS 1. AMPS (Tx) Low Loss type Part number: FAR-F5CE-836M50-K225 869 MHz 869 MHz 894 MHz 11F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 2. AMPS (Tx) High Attenuation type Part number: FAR-F5CE-836M50-K205 Sa log MAG 5dB/ REF OdB 12F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 3. AMPS (Rx) Low Loss type Part number: FAR-F5CE-881M50-K206 914 MHz 869 MHz 894 MHz 13F5/F6 Series (K2 type) SSE SUSE SSS ES SUS SUES SESS STEELE UESuESEEESSESSE STS UEEES SSS S SE 14 4. AMPS (Rx) High Attenuation type Part number: FAR-F5CE-881M50-K210 yoo ta 4-869 MHz 894. MHz 869 MHzF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 5. EGSM (Rx) Part number: FAR-F5CE-942M50-K216 a 7. S925 MHz 960 MHz 980 MHz be. NO 44t720 15F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 6. PDC800 (Tx) Part number: FAR-F5CE-950M00-K201 16F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 7. PDC800 (Rx) Low Loss type Part number: FAR-F5CE-820M00-K202 ' SSN 830 MHz 960 MHz a 8. , SA 830 MHz 960 MHz 17F5/F6 Series (K2 type) SSE SUSE SSS ES SUS SUES SESS STEELE UESuESEEESSESSE STS UEEES SSS S SE 18 8. PDC800 (Rx) High Attenuation type Part number: FAR-F5CE-820M00-K204 830 MHz 960 MHzF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 9. PDC800 (35 MHz Pass Band width) (Tx) Low Loss type Part number: FAR-F5CE-942M50-K209 19F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 10. PDC800 (35 MHz Pass Band width) (Tx) High Attenuation type Part number: FAR-F5CE-941M50-K208 925 MHz 960 GHz 20F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 11. J-CDMA (Tx) Low Loss type Part number: FAR-F5CE-906M00-K211 21F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 12. J-CDMA (Tx) Part number: FAR-F5CE-906M00-K215 22F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 13. J-CDMA (Rx) Low Loss type Part number: FAR-F5CE-851M00-K212 23F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 14. PDC1.5 G (Tx) Part number: FAR-F6CE-1G4410-K220 24F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 15. PDC1.5 G (Rx) Part number: FAR-F6CE-1G4890-K221 25F5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee @ MEASURMENT CIRCUIT oO | > 5 -_1)) m@ PART NUMBER DESIGNATIONF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee m@ PACKAGE DIMENSION Dimensions in mmF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee @ PACKING: Reel typeF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee 3. Tape Dimensions oS 1 2 au r 1 B5+04 | 4 o af @t- moe +@t- Dimensions in mmF5/F6 Series (K2 type) SSS SESS SSS SSS SSS ee FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-8588, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 http-/Awww.fujitsu.co.jo/ North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, USA Tel: (408) 922-9000 Fax: (408) 922-9179 Customer Response Center Mon. - Fri: 7 am - 5 pm (PST) Tel: (800) 866-8608 Fax: (408) 922-9179 htip:/Awww.fujitsumicro.com/ Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 htip://www.fujitsu-ede.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 htip://www.fmap.com.sg/ F9804 FUJITSU LIMITED Printed in Japan All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.