Wirewound Resistors, Noise Suppressor
NSR
Vishay Dale
www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30252
172 Revision: 08-Jul-09
FEATURES
•Ideal for reducing RFI during electrical
discharges on gasoline engines
•Variety of resistance and inductance values
available
•Special design of electrical contacts upon
request
•Capability to withstand high voltage pulses at high
frequency
•Compliant to RoHS directive 2002/95/EC
TECHNOLOGY
The resistor element is a resistive wire, which is wound in a single layer on a fiberglass core. Metallic caps or electrodes are
fixed to the ends of the resistive core, following the specific ignition system characteristics. A coating protects the resistive
element against moisture and mechanical shock, plus is able to withstand high temperatures. These products can be molded
with epoxy resin, thermoplastic or thermo set materials.
Notes
(1) Special resistance values available upon request
(2) Other tolerances available upon request
(3) Special inductance values available upon request
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
TYPE 1 (WITH CAPS) TYPE 2 (WITH ELECTRODES) TECHNICAL SPECIFICATIONS
PARAMETER UNIT NSR
CHARACTERISTICS
Resistance Range (1) Ω1K - 15K
Tolerances (2) % ± 10 , ± 15, ± 20
Inductance Range, 2 MHz (3) µH 5 to 56
Temperature Coefficient ppm/°C ± 250
Operating Temperature Range °C - 40 to + 200
GLOBAL PART NUMBER INFORMATION
Global Part Number Example: 230630990078000000 (Historical Part Numbering example: 2306 309 90078)
GLOBAL MODEL SPECIAL
See page 2
Global Model
columns for
options
000000 = Standard
3063099007800002 0 0
Document Number: 30252 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com
Revision: 08-Jul-09 173
NSR
Wirewound Resistors, Noise Suppressor Vishay Dale
TYPE 1 - NOISE SUPPRESSOR WITH CAPS
TYPE 2 - NOISE SUPPRESSOR WITH ELECTRODES
Note
• Other electrode designs available under request
ELECTRICAL AND DIMENSIONAL DATA in inches [millimeters]
GLOBAL MODEL
ELECTRICAL DATA DIMENSIONAL DATA
VALUE TOLERANCE INDUCTANCE
TYPICAL LDH
230630990035000000 5 kΩ± 20 % 20 µH 0.79 [20.0] 0.153 [3.88] 0.112 [2.85]
230630990047000000 5.2 kΩ ± 15 % 15 µH 0.66 [16.8] 0.124 [3.15] 0.094 [2.40]
230630990048000000 1 kΩ + 20 %, - 10 % 16 µH 0.66 [16.8] 0.124 [3.15] 0.094 [2.40]
230630990053000000 5 kΩ ± 20 % 18 µH 0.93 [23.7] 0.153 [3.88] 0.112 [2.85]
230630990078000000 1 kΩ ± 20 % 10 µH 0.93 [23.7] 0.153 [3.88] 0.112 [2.85]
230630990085000000 1 kΩ ± 20 % 9 µH 1.02 [26.0] 0.153 [3.88] 0.112 [2.85]
230630990086000000 1 kΩ ± 20 % 5 µH 0.79 [20.0] 0.153 [3.88] 0.112 [2.85]
230630990094000000 5 kΩ ± 20 % 16 µH 0.93 [23.7] 0.153 [3.88] 0.112 [2.85]
230630990095000000 15 kΩ ± 20 % 12 µH 1.08 [27.3] 0.15 [3.82] 0.112 [2.85]
230630990101000000 1.12 kΩ ± 20 % 13 µH 0.47 [11.9] 0.171 [4.35] 0.112 [2.85]
230630990105000000 2 kΩ ± 20 % 14 µH 0.53 [13.5] 0.171 [4.35] 0.112 [2.85]
230630990106000000 2 kΩ ± 20 % 21 µH 1.08 [27.3] 0.153 [3.88] 0.112 [2.85]
230630990107000000 2 kΩ ± 20 % 8 µH 0.79 [20.0] 0.153 [3.88] 0.112 [2.85]
230630990108000000 5 kΩ ± 20 % 10 µH 0.93 [23.7] 0.153 [3.88] 0.112 [2.85]
230630990112000000 2 kΩ ± 20 % 9 µH 1.02 [26.0] 0.153 [3.88] 0.112 [2.85]
ELECTRICAL AND DIMENSIONAL DATA in inches [millimeters]
GLOBAL MODEL
ELECTRICAL DATA DIMENSIONAL DATA
VALUE TOLERANCE INDUCTANCE
TYPICAL LDHE
230630990008000000 5 kΩ + 20 %, - 10 % 50 µH 1.35 [34.3] 0.16 [3.9] 0.43 [11.0] 0.93 [23.5]
230630990009000000 4.5 kΩ ± 10 % 17 µH 1.04 [26.3] 0.12 [3.0] 0.42 [10.5] 0.57 [14.4]
230630990014000000 5 kΩ ± 10 % 19 µH 1.19 [30.2] 0.12 [3.0] 0.42 [10.5] 0.58 [14.8]
230630990021000000 5.3 kΩ ± 15 % 56 µH 1.35 [34.3] 0.16 [3.9] 0.71 [18.0] 0.93 [23.5]
230630990027000000 1.1 kΩ ± 15 % 9 µH 1.17 [29.7] 0.154 [3.9] 0.71 [18.0] 0.42 [10.6]
230630990029000000 1.1 kΩ ± 15 % 8.5 µH 1.17 [29.7] 0.16 [3.9] 0.43 [11.0] 0.42 [10.6]
230630990038000000 1 kΩ ± 10 % 5 µH 1.19 [30.2] 0.12 [2.95] 0.42 [10.5] 0.58 [14.8]
230630990055000000 5.2 kΩ ± 13 % 54 µH 1.34 [34.1] 0.16 [3.9] 0.32 [8.15] 0.93 [23.5]
230630990057000000 1 kΩ ± 10 % 5 µH 1.19 [30.2] 0.12 [3.0] 0.71 [18.0] 0.58 [14.8]
230630990058000000 5 kΩ ± 10 % 20 µH 1.19 [30.2] 0.12 [3.0] 0.71 [18.0] 0.58 [14.8]
230630990069000000 1 kΩ ± 10 % 4 µH 1.39 [35.3] 0.12 [3.0] 0.71 [18.0] 0.81 [20.4]
230630990079000000 5 kΩ ± 10 % 16 µH 1.35 [34.25] 0.12 [3.0] 0.71 [18.0] 0.76 [19.2]
H
L
D
H
E
L
D
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
