Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT n Features * The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. * Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). * Plugs have an easy-to-use ejection mechanism. * Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. * In addition to connectors for type I and type II cards, a connector for type III cards has been provided. * The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. n Pin Connector (Plug) Contact Length n specifications Specification Item Contact type Pin No. Contact length Operating temperature range - 55C to + 85C Power, ground pins 1, 17, 34, 35, 51, 68 Current rating DC 0.5 A Card detection pins 36, 67 3.5 mm (0.137 in.) Voltage rating AC 250 V Other signal pins Others 4.25 mm (0.167 in.) Contact resistance 40 m max (6 VDC, 0.1 A) Insulation resistance 1000 M min. (500 VDC) Dielectric withstanding voltage 500 VAC for 1 minute Insertion/withdrawal life Industrial environment: 5,000 times Office environment: 10,000 times 5.0 mm (0.196 in.) n Materials Item Specification Plug body: PPS resin UL94V-0 : 6T nylon (for type III card connector) UL94V-0 Insulating material Ejector: Polyester : PPS resin (for SMT and type III card connectors) Specifications subject to change Conductor Copper alloy Plating Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 nOrdering PART NUMBER [Plug] FCN-56 5 P 068-G / XC-V4 V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-ESD Specification Plating G: Gold plating Number of contacts: 68, 136 Body P: Plug Pin type 4: Straight 5: Right-angle 8: SMT 560 series connector Fujitsu connector nOrdering PART NUMBER [SOCKET] FCN-56 8 J 068-G / 0 Terminal type 0: PC board double-sided straddle type B: PC board single-sided mounting type Plating G: Gold plating Number of contacts: 68 Body J: Socket Pin type 8: SMT 560 series connector Fujitsu connector Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support right-angle plug, smt light weight type (with right-button ejector, with fg clip) Part number: FCN-568P068-G/0563-4E (for 5V Card) FCN-568P068-G/0963-4E (3.3 V card support) Main body Ejector (guide) Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. n PC Board Mounting pattern (Mounting Side) Detail of Z portion Detail of Y portion Note 1: Ground pattern Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, WITH FG CLIP) nDimensions (FOR 5V CARD/3.3V CARD) Part number: FCN-568P068-G/0564-4E (for 5V card) FCN-568P068-G/0964-4E (3.3V card support) Main body Ejector (guide) Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. n PC Board Mounting PATTERN (Mounting Side) Detail of Z portion Detail of Y portion Note 1: Ground pattern Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, WITH FG CLIP, TO BE MOUNTED ON BACK OF PC BOARD) nDimensions (FOR 5V CARD/3.3V CARD) Part number: FCN-568P068-G/0663-4E (for 5V card) FCN-568P068-G/1063-4E (3.3V card support) Main body Ejector (guide) 56.6 (2.228) 0.635 (0.025) 19 No.35 No.68 1.27 (0.050) No.34 5.6(0.220) 54.2 (2.133) No.1 1.27 x (34-1)=41.91 (1.650) 2.7(0.106) 4.6 (0.181) 1.27 (0.050) 2.0 (0.079) 2.5 (0.098) (0.748) 6.3 (0.248) 10 4.08 (0.161) 0.635 x (68-1)=42.545 (1.675) (0.393) 2.175 (0.086) 7.32 (0.288) 49.5 (1.949) 49.02 (1.930) Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. n PC Board Mounting PATTERN (Mounting Side) Detail of Z portion Detail of Y portion Note 1: Ground pattern Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, SMT LIGHT WEIGHT (with left-button ejector, WITH FG CLIP, TO BE MOUNTED ON BACK IF PC BOARD) Part number: FCN-568P068-G/0664-4E (for 5V card) FCN-568-P068-G/1064-4E (3.3V card support) Main body Ejector (guide) 56.6 (2.228) 0.635 (0.025) 19 No.68 5.6(0.220) 54.2 (2.133) No.35 1.27 (0.050) No.1 No.34 2.7(0.106) 4.6 (0.181) 1.27 (0.050) 2.0 (0.079) 2.5 (0.098) (0.748) 6.3 (0.248) 10 4.08 (0.161) 0.635 x (68-1)=42.545 (1.675) (0.393) 2.175 (0.086) 7.32 (0.288) 49.5 (1.949) 1.27 x (34-1)=41.91 (1.650) 49.02 (1.930) Material connector main body: PPS guide: PBT button: ABS * Connector main body and ejector are shipped separately. Unit: mm (in.) n PC Board Mounting PATTERN (Mounting Side) Detail of Z portion Detail of Y portion Note 1: Ground pattern Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, SMT LIGHT WEIGHT TYPE (with RIGHT -button ejector, 2 mm raised type, with FG clip) nDimensions (FOR 5V CARD/3.3V CARD) Part number: FCN-568P068-G/0770-4E (for 5V card) Part number: FCN-568P068-G/1170-4E (3.3V card support) Main body Ejector (guide) Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. 0.450.1(0.01 80.004) No.1 see detail Y No.68 No.34 0.635 0.05 (0.0250.002) 4 (0.157) 4.5 (0.177) 49.050.01(1. 9300.004) 5.4250.1 (0. 2140.004) 0.002) 3.90.05(0.154 7.90.05(0. 3110.002) n PC Board Mounting PATTERN (Mounting Side) No. 2 No.1 5-0(0.1 97-0) 59.8 0.1(2.3540.004) 2-2.30.1 860.004) (0.0 (*2) Specifications subject to change R (0. 0.52 02 0) (*1) Detail Z (5/1) Unit: mm (in.) see detail Z Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 2: Ground pattern 0.5 (0.012) No.36 No.35 1.04-0+0.1 (0.041-0+0.00) 4 0.45 0.05 (0.0180.002) Detail Y (5/1) 1 4.00.05 0.002) (0.157 58.050.1(2.2850.004) +0 . 00 4 4) +00 .00 see detail Z 1.04-0+0.1 +0.004 ) (0.041 -0 +0 . 4- 0 .0 4+1-0 1 .0 (0 49.020.05(1. 9300.002) 4-0 ) .0 0 1 041- 0. ( 66.450.05(2.6160.002) 1.0-0 4.080.05(0.1 600.002) (0.0 39-0) No.34 0.6350.05(0.0 250.002) 0.635x(68 - 1) = 42.5450.1(1. 9300.004) Note 3: Drawing is for the type to be inserted on the front of PCB Note 4: In hatched area component mounting is prohibited Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, smt light weight type (with left-button ejector, 2 mm raised type, with FG clip) nDimensions (for 5v card/3.3v card) Part number: FCN-568P068-G/0771-4E (for 5V card) Part number: FCN-568P068-G/1171-4E (3.3V card support) Ejector (guide) Main body Material connector main body: PPS guide: PBT button: ABS * Connector main body and ejector are shipped separately. Unit: mm (in.) 0.450.1(0.01 80.004) No.1 see detail Y No.68 No.34 4 (0.157) 4.5 (0.177) 49.050.01(1. 9300.004) 5.4250.1 (0. 2140.004) 0.002) 3.90.05(0.154 7.90.05(0. 3110.002) n PC Board Mounting Pattern (Mounting Side) 0.635 0.05 (0.0250.002) No. 2 No.1 1 0.45 0.05 (0.0180.002) Detail Y (5/1) 5-0(0.1 97-0) 59.8 0.1(2.3540.004) (*2) 0.5 (0.012) (*1) R (0. 0.52 02 0) 4.00.05 0.002) (0.157 see detail Z No.36 No.35 1.04-0+0.1 (0.041-0+0.00) 4 +0 . 04 4) +00 .00 58.050.1(2.2850.004) +0 .0 4- 0 .0 4+1-0 1 .0 (0 49.020.05(1. 9300.002) 4-0 ) .0 0 1 041- 0. ( 66.450.05(2.6160.002) 1.0-0 4.080.05(0.1 600.002) (0.0 39-0) No.34 0.6350.05(0.0 250.002) 0.635x(68 - 1) = 42.5450.1(1. 9300.004) Detail Z (5/1) 1.04 (0.041 ) +0.1 -0 +0.004 -0 2-2.30.1 860.004) (0.0 Unit: mm (in.) see detail Z Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 2: Ground pattern Specifications subject to change Note 3: Drawing is for the type to be inserted on the front of PCB Note 4: In hatched area component mounting is prohibited Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, smt light weight type (with right-button ejector, 2 mm raised type, with FG clip, to be mounted on back of pc boarD) nDimensions (for 5v card/3.3v card) Part number: FCN-568P068-G/0870-4E (for 5V card) FCN-568P068-G1270-4E (3.3V card support) Main body Ejector (guide) Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. 0.635 0.05 (0.0250.002) No.68 see detail Y No. 1 No.35 +0.1 1.04 -0 +0.004 (0.041 ) -0 49.020.05(1. 9300.002) ( 1 0. .0 04 4-0+0.1 1-0+0.00 1 )4 ( .0 4+ 0 0 4+1-00 -0 .0 5-0(0.1 97-0) 59.8 0.1(2.3540.004) 2-2.30.1 860.004) (0.0 (*2) Specifications subject to change ) 0.5 (0.012) (*1) R (0. 0.52 02 0) Detail Z (5/1) see detail Z Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 2: Ground pattern No.34 Detail Y (5/1) 04 see detail Z No.33 0.45 0.05 (0.0180.002) .0 4.00.05 0.002) (0.157 58.050.1(2.2850.004) 66.450.05(2.6160.002) 1.0-0 4.080.05(0.1 600.002) (0.0 39-0) No.34 0.6350.05(0.0 250.002) 0.635x(68 - 1) = 42.5450.1(1. 9300.004) No.67 No.68 1.04-0+0.1 (0.041-0+0.0)04 0.450.1(0.01 80.004) 4 (0.157) 4.5 (0.177) 49.050.01(1. 9300.004) 5.4250.1 (0. 2140.004) 0.002) 3.90.05(0.154 7.90.05(0. 3110.002) n PC Board Mounting PATTERN (Mounting Side) Unit: mm (in.) Note 3: Drawing is for the type to be inserted on the front of PCB Note 4: In hatched area component mounting is prohibited Dimensions are in millimeters (inches) www.fcai.fujitsu.com 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, SMT LIGHT WEIGHT TYPE (GUIDE RAILS ONLY, 2.1 mm raised type, with FG clip) nDimensions (for 5v card/3.3v card) Part number: FCN-568P068-G/0773-4E (for 5V card) FCN-568P068-G/1173-4E (3.3V card support) Ejector (guide) Main body Material connector main body: PPS guide: PBT button: ABS Unit: mm (in.) * Connector main body and ejector are shipped separately. 0.450.1(0.01 80.004) No.1 see detail Y No.68 No.34 4 (0.157) 4.5 (0.177) 49.050.01(1. 9300.004) 5.4250.1 (0. 2140.004) 0.002) 3.90.05(0.154 7.90.05(0. 3110.002) n PC Board Mounting PATTERN (Mounting Side) 0.635 0.05 (0.0250.002) No. 2 No.1 1 4 0.45 0.05 (0.0180.002) Detail Y (5/1) 5-0(0.1 97-0) 59.8 0.1(2.3540.004) (*2) 0.5 (0.012) (*1) 4.00.05 0.002) (0.157 see detail Z No.36 No.35 1.04-0+0.1 (0.041-0+0.00) 4 +0 . 00 4) +00 .00 58.050.1(2.2850.004) +0 . 4- 0 .0 4+1-0 1 .0 (0 49.020.05(1. 9300.002) 4-0 ) .0 0 1 041- 0. ( 66.450.05(2.6160.002) 1.0-0 4.080.05(0.1 600.002) (0.0 39-0) No.34 0.6350.05(0.0 250.002) 0.635x(68 - 1) = 42.5450.1(1. 9300.004) R (0. 0.52 02 0) Detail Z (5/1) 1.04 (0.041 ) +0.1 -0 +0.004 -0 2-2.30.1 860.004) (0.0 Unit: mm (in.) see detail Z Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 2: Ground pattern Specifications subject to change Note 3: Drawing is for the type to be inserted on the front of PCB Note 4: In hatched area component mounting is prohibited Dimensions are in millimeters (inches) www.fcai.fujitsu.com 10 560H Series Connector Conforming to Ver. 4 Type 1 ~ III card support Right-angle plug, smt light weight type (with LEFT-button ejector, 2 mm raised type, with FG clip, to be mounted on back of pc board) nDimensions (FOR 5V CARD/3.3V Card) Part number: FCN-568P068-G/0871-4E (for 5V card) FCN-568P068-G/1271-4E (3.3V card support) Main body Ejector (guide) Material connector main body: PPS guide: PBT button: ABS * Connector main body and ejector are shipped separately. Unit: mm (in.) +0.1 1.04 -0 +0.004 (0.041 ) -0 49.020.05(1. 9300.002) ( 1 0. .0 04 4-0+0.1 1-0+0.00 1 )4 ( .0 0. 4+0 04+-0 -010. 5-0(0.1 97-0) 59.8 0.1(2.3540.004) )4 0.5 (0.012) (*1) (*2) No.34 Detail Y (5/1) 00 see detail Z No.33 0.45 0.05 (0.0180.002) 4.00.05 0.002) (0.157 58.050.1(2.2850.004) 66.450.05(2.6160.002) 1.0-0 4.080.05(0.1 600.002) (0.0 39-0) No.34 0.6350.05(0.0 250.002) 0.635x(68 - 1) = 42.5450.1(1. 9300.004) No.67 No.68 1.04-0+0.1 (0.041-0+0.0)04 0.450.1(0.01 80.004) No.68 see detail Y No. 1 No.35 4 (0.157) 4.5 (0.177) 49.050.01(1. 9300.004) 0.635 0.05 (0.0250.002) 5.4250.1 (0. 2140.004) 0.002) 3.90.05(0.154 7.90.05(0. 3110.002) n PC Board Mounting PATTERN (Mounting Side) R (0. 0.52 02 0) Detail Z (5/1) 2-2.30.1 860.004) (0.0 see detail Z Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 2: Ground pattern Specifications subject to change Unit: mm (in.) Note 3: Drawing is for the type to be inserted on the front of PCB Note 4: In hatched area component mounting is prohibited Dimensions are in millimeters (inches) www.fcai.fujitsu.com 11 560H Series Connector Conforming to Ver. 4 Card lock type / type 1 ~ iii card support RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT type (with RIGHT-BUTTON ejector, WITH FG CLIP) Part number: FCN-568P068-G/0578-4E (for 5V card) FCN-568P068-G/0978-4E (for 3.3V card support) Main body * Connector main body and ejector are shipped separately. Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 12 560H Series Connector Conforming to Ver. 4 Card lock type / type 1 ~ iii card support RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT type (with RIGHT-BUTTON ejector, WITH FG CLIP) Part number: FCN-568P068-G/0578-4E (for 5V card) FCN-568P068-G/0978-4E (for 3.3V card support) Note 1: Pattern Note 2: In hatched areas, component mounting, VIA holes higher than PC board surface, and patterns are prohibited Note 3: Ground Pattern Unit: mm (in.) n recommended dimension n card lock method of Body (button area) Push down the button after inserting card Note 1: Use 6mm long screws, screw torque is 2kg/cm Specifications subject to change Slide the pushed down button to lock Unit: mm (in.) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 13 560H Series Connector Conforming to Ver. 4 Card lock type / type 1 ~ iii card support RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT type (with left-BUTTON ejector, WITH FG CLIP) nDIMENSIONS (FOR 5V CARD/3.3V card) Part number: FCN-568P068-G/0579-4E (for 5V card) FCN-568P068-G/0974-4E (for 3.3V card support) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 14 560H Series Connector Conforming to Ver. 4 Card lock type / type 1 ~ iii card support RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT type (with left-BUTTON ejector, WITH FG CLIP) n PC BOARD MOUNTING PATTERN (MOUNTING SIDE) Part number: FCN-568P068-G/0579-4E (for 5V card) FCN-568P068-G/0974-4E (for 3.3V card support) Note 1: Pattern Note 2: In hatched areas, component mounting, VIA holes higher than PC board surface, and patterns are prohibited Note 3: Ground Pattern Unit: mm (in.) n recommended dimension n card lock method of Body (button area) Push down the button after inserting card Note 1: Use 6mm long screws, screw torque is 2kg/cm Specifications subject to change Slide the pushed down button to lock Unit: mm (in.) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 15 560H Series Connector Conforming to Ver. 4 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. August 8, 2008. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 16