1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE) SURFACE MOUNT
560H SERIES - LIGHTWEIGHT
n FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal Computer
Memory Card International Association (PCMCIA)
standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-prole connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
n PIN CONNECTOR (PLUG) CONTACT LENGTH
n SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specication
– 55°C to + 85°C
DC 0.5 A
AC 250 V
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Ofce environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
n MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
:
PPS resin
(for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specication
Item
Insulating material
Conductor
Plating
560H Series Connector Conforming to Ver. 4
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
n ORDERING PART NUMBER [PLUG]
V4: Conforms to Ver.4
E4: Conforms to Ver.4 and anti-ESD
Specication
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type 4: Straight
5: Right-angle
8: SMT
560 series connector
Fujitsu connector
FCN-56 5 P 068-G / XC-V4
n ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Terminal type 0: PC board double-sided straddle type
B:
PC board single-sided mounting type
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector
560H Series Connector Conforming to Ver. 4
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, WITH FG
CLIP)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Detail of Y portion
Detail of Z portion
Note 1: Ground pattern
Part number: FCN-568P068-G/0563-4E (for 5V Card)
FCN-568P068-G/0963-4E (3.3 V card support)
560H Series Connector Conforming to Ver. 4
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, WITH FG CLIP)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0564-4E (for 5V card)
FCN-568P068-G/0964-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Detail of Y portion
Detail of Z portion
Note 1: Ground pattern
560H Series Connector Conforming to Ver. 4
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, WITH FG CLIP, TO BE MOUNTED ON BACK OF PC BOARD)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0663-4E (for 5V card)
FCN-568P068-G/1063-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Detail of Y portion
Detail of Z portion
Note 1: Ground pattern
No.1
No.35
No.34
No.68
56.6 (2.228)
49.5 (1.949)
0.635 x (68-1)=42.545 (1.675)
0.635 (0.025)
2.5 (0.098)
6.3 (0.248)
2.0 (0.079)
2.175 (0.086)
4.08 (0.161)
7.32 (0.288)
19
(0.748)
49.02 (1.930)
1.27 x (34-1)=41.91 (1.650)
1.27 (0.050)
1.27 (0.050)
2.7(0.106)
5.6(0.220)
4.6 (0.181)
10
(0.393)
54.2 (2.133)
560H Series Connector Conforming to Ver. 4
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT (WITH LEFT-BUTTON EJECTOR, WITH FG CLIP, TO BE MOUNTED ON BACK IF PC
BOARD)
Part number: FCN-568P068-G/0664-4E (for 5V card)
FCN-568-P068-G/1064-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Detail of Y portion
Note 1: Ground pattern
No.1
No.35
No.34
No.68
56.6 (2.228)
49.5 (1.949)
0.635 x (68-1)=42.545 (1.675)
0.635 (0.025)
2.5 (0.098)
6.3 (0.248)
2.0 (0.079)
2.175 (0.086)
4.08 (0.161)
7.32 (0.288)
19
(0.748)
49.02 (1.930)
1.27 x (34-1)=41.91 (1.650)
1.27 (0.050)
1.27 (0.050)
2.7(0.106)
5.6(0.220)
4.6 (0.181)
10
(0.393)
54.2 (2.133)
Detail of Z portion
560H Series Connector Conforming to Ver. 4
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT -BUTTON EJECTOR, 2 mm RAISED TYPE, WITH FG CLIP)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0770-4E (for 5V card)
Part number: FCN-568P068-G/1170-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
4.5 (0.177)
No. 34
5.425
±0.1
(0.214
±0.004
)
4 (0.157)
0.45
±0.1
(0.018±0.004
)
3.9±0.05
(0.154
±0.002)
7.9±0.05
(0.311±0.002)
4.08±0.05
(0.160±0.002)
4.0
±0.05
(0.157
±0.002)
66.45
±0.05
(2.616±0.002)
0.635×(68 – 1)=
42.545
±0.1
(1.930±0.004
)
58.05
±0.1
(2.285±0.004
)
49.02±0.05
(1.930±0.002)
0.635±0.05
(0.025±0.002)
φ1.04
+0
(0.041
+0.004
)
-
0
-
0
5-0(0.197-0)
59.8
±0.1
(2.354±0.004
)
2-
φ2.
3
±0.1
(0.0
86
±0.004
)
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
see detail Y
No.1
see detail Z
see detail Z
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
No. 34
No. 68
1.0 -0
(0.039-0)
(*2)
(*1)
49.05
±0.01
(1.930±0.004
)
Note 1: Use 6mm long screws, screw torque is 2kg/cm
Note 2: Ground pattern
Note 3: Drawing is for the type to be inserted on the front of PCB
Note 4: In hatched area component mounting is prohibited
No.36
No.35
No. 2
No.1
Detail Y (5/1)
0.635
±0.05
(0.025
±0.002
)
0.45
±0.05
(0.018
±0.002
)
1.04
–0
(0.041
–0
)
+0.1
+0.004
R 0.52
(0.020)
0.5
(0.012)
Detail Z (5/1)
560H Series Connector Conforming to Ver. 4
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, 2 mm RAISED TYPE, WITH FG CLIP)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Part number: FCN-568P068-G/0771-4E (for 5V card)
Part number: FCN-568P068-G/1171-4E (3.3V card support)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Unit: mm (in.)
4.5 (0.177)
No. 34
5.425
±0.1
(0.214
±0.004
)
4 (0.157)
0.45
±0.1
(0.018
±0.004
)
3.9
±0.05
(0.154
±0.002
)
7.9
±0.05
(0.311
±0.002
)
4.08
±0.05
(0.160
±0.002
)
4.0
±0.05
(0.157
±0.002
)
66.45
±0.05
(2.616
±0.002
)
0.635×(68 – 1)=
42.545
±0.1
(1.930
±0.004
)
58.05
±0.1
(2.285
±0.004
)
49.02
±0.05
(1.930
±0.002
)
0.635
±0.05
(0.025
±0.002
)
φ1.04
+0
(0.041
+0.004
)
-
0
-
0
5
-0
(0.197-
0
)
59.8
±0.1
(2.354
±0.004
)
2-
φ2.
3
±0.1
(0.0
86
±0.004
)
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
see detail Y
No.1
see detail Z
see detail Z
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
No. 34
No. 68
1.0
-0
(0.039
-0
)
(*2)
(*1)
49.05
±0.01
(1.930
±0.004
)
Note 1: Use 6mm long screws, screw torque is 2kg/cm Note 3: Drawing is for the type to be inserted on the front of PCB
Note 4: In hatched area component mounting is prohibited
No.36
No.35
No. 2
No.1
Detail Y (5/1)
0.635
±0.05
(0.025
±0.002
)
0.45
±0.05
(0.018
±0.002
)
1.04
–0
(0.041
–0
)
+0.1
+0.004
R 0.52
(0.020)
0.5
(0.012)
Detail Z (5/1)
Note 2: Ground pattern
560H Series Connector Conforming to Ver. 4
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, 2 mm RAISED TYPE, WITH FG CLIP, TO BE MOUNTED ON BACK OF PC BOARD)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0870-4E (for 5V card)
FCN-568P068-G1270-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
No.33
No.34
No.67
No.68
Detail Y (5/1)
0.635
±0.05
(0.025
±0.002
)
0.45
±0.05
(0.018
±0.002
)
1.04
–0
(0.041
–0
)
+0.1
+0.004
R 0.52
(0.020)
0.5
(0.012)
Detail Z (5/1)
Note 1: Use 6mm long screws, screw torque is 2kg/cm
Note 2: Ground pattern
Note 3: Drawing is for the type to be inserted on the front of PCB
Note 4: In hatched area component mounting is prohibited
4.5 (0.177)
No. 34
5.425
±0.1
(0.214
±0.004
)
4 (0.157)
0.45
±0.1
(0.018
±0.004
)
3.9
±0.05
(0.154
±0.002
)
7.9
±0.05
(0.311
±0.002
)
4.08
±0.05
(0.160
±0.002
)
4.0
±0.05
(0.157
±0.002
)
66.45
±0.05
(2.616
±0.002
)
0.635×(68 – 1)=
42.545
±0.1
(1.930
±0.004
)
58.05
±0.1
(2.285
±0.004
)
49.02
±0.05
(1.930
±0.002
)
0.635
±0.05
(0.025
±0.002
)
φ1.04
+0
(0.041
+0.004
)
-
0
-
0
5
-0
(0.197-
0
)
59.8
±0.1
(2.354
±0.004
)
2-
φ2.
3
±0.1
(0.0
86
±0.004
)
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
see detail Y
No. 68
see detail Z
see detail Z
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
No. 35
No. 1
1.0
-0
(0.039
-0
)
(*2)
(*1)
49.05
±0.01
(1.930
±0.004
)
560H Series Connector Conforming to Ver. 4
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (GUIDE RAILS ONLY, 2.1 mm RAISED TYPE, WITH FG CLIP)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0773-4E (for 5V card)
FCN-568P068-G/1173-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Unit: mm (in.)
4.5 (0.177)
No. 34
5.425±0.1
(0.214±0.004
)
4 (0.157)
0.45
±0.1
(0.018
±0.004
)
3.9
±0.05
(0.154
±0.002
)
7.9
±0.05
(0.311
±0.002
)
4.08
±0.05
(0.160
±0.002
)
4.0
±0.05
(0.157
±0.002
)
66.45
±0.05
(2.616
±0.002
)
0.635×(68 – 1)=
42.545
±0.1
(1.930
±0.004
)
58.05
±0.1
(2.285
±0.004
)
49.02
±0.05
(1.930
±0.002
)
0.635
±0.05
(0.025
±0.002
)
φ1.04
+0
(0.041
+0.004
)
-
0
-
0
5
-0
(0.197-
0
)
59.8
±0.1
(2.354
±0.004
)
2-
φ2.
3
±0.1
(0.0
86
±0.004
)
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
see detail Y
No.1
see detail Z
see detail Z
φ1.04
–0
(
φ0.041
–0
)
+0.1
+0.004
No. 34
No. 68
1.0
-0
(0.039
-0
)
(*2)
(*1)
49.05
±0.01
(1.930
±0.004
)
Note 1: Use 6mm long screws, screw torque is 2kg/cm
Note 2: Ground pattern
Note 3: Drawing is for the type to be inserted on the front of PCB
Note 4: In hatched area component mounting is prohibited
No.36
No.35
No. 2
No.1
Detail Y (5/1)
0.635
±0.05
(0.025
±0.002
)
0.45
±0.05
(0.018
±0.002
)
1.04
–0
(0.041
–0
)
+0.1
+0.004
R 0.52
(0.020)
0.5
(0.012)
Detail Z (5/1)
560H Series Connector Conforming to Ver. 4
11
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, 2 mm RAISED TYPE, WITH FG CLIP, TO BE MOUNTED ON BACK OF PC BOARD)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
Part number: FCN-568P068-G/0871-4E (for 5V card)
FCN-568P068-G/1271-4E (3.3V card support)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
• Connector main body and ejector are shipped separately.
Unit: mm (in.)
Ejector (guide) Main body
Material
connector main body: PPS
guide: PBT
button: ABS
Unit: mm (in.)
No.33
No.34
No.67
No.68
Detail Y (5/1)
0.635
±0.05
(0.025
±0.002
)
0.45
±0.05
(0.018
±0.002
)
1.04
–0
(0.041
–0
)
+0.1
+0.004
R 0.52
(0.020)
0.5
(0.012)
Detail Z (5/1)
Note 1: Use 6mm long screws, screw torque is 2kg/cm
Note 2: Ground pattern
Note 3: Drawing is for the type to be inserted on the front of PCB
Note 4: In hatched area component mounting is prohibited
560H Series Connector Conforming to Ver. 4
12
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
Part number: FCN-568P068-G/0578-4E (for 5V card)
FCN-568P068-G/0978-4E (for 3.3V card support)
Unit: mm (in.)
• Connector main body and ejector are shipped separately.
Main body
CARD LOCK TYPE / TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, WITH FG
CLIP)
560H Series Connector Conforming to Ver. 4
13
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
CARD LOCK TYPE / TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH RIGHT-BUTTON EJECTOR, WITH FG
CLIP)
Part number: FCN-568P068-G/0578-4E (for 5V card)
FCN-568P068-G/0978-4E (for 3.3V card support)
n RECOMMENDED DIMENSION
OF BODY (BUTTON AREA)
Note 1: Pattern
Note 2: In hatched areas, component mounting, VIA holes higher than PC board
surface, and patterns are prohibited
Note 3: Ground Pattern
Unit: mm (in.)
Unit: mm (in.)
n CARD LOCK METHOD
Note 1: Use 6mm long screws,
screw torque is 2kg/cm
Push down the button
after inserting card
Slide the pushed
down button to lock
560H Series Connector Conforming to Ver. 4
14
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
Part number: FCN-568P068-G/0579-4E (for 5V card)
FCN-568P068-G/0974-4E (for 3.3V card support)
CARD LOCK TYPE / TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, WITH FG CLIP)
n DIMENSIONS (FOR 5V CARD/3.3V CARD)
560H Series Connector Conforming to Ver. 4
15
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
CARD LOCK TYPE / TYPE 1 ~ III CARD SUPPORT
RIGHT-ANGLE PLUG, SMT LIGHT WEIGHT TYPE (WITH LEFT-BUTTON EJECTOR, WITH FG CLIP)
n PC BOARD MOUNTING PATTERN (MOUNTING SIDE)
Part number: FCN-568P068-G/0579-4E (for 5V card)
FCN-568P068-G/0974-4E (for 3.3V card support)
n RECOMMENDED DIMENSION
OF BODY (BUTTON AREA)
Note 1: Pattern
Note 2: In hatched areas, component mounting, VIA holes higher than PC board
surface, and patterns are prohibited
Note 3: Ground Pattern
Unit: mm (in.)
Unit: mm (in.)
n CARD LOCK METHOD
Push down the button
after inserting card
Slide the pushed
down button to lock
Note 1: Use 6mm long screws,
screw torque is 2kg/cm
560H Series Connector Conforming to Ver. 4
16
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: http://www.fujitsu.com/emea/services/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specications/datasheets without prior notice. Rev. August 8, 2008.