COMPONENTS PRODUCT INFORMATION
CONNECTOR
NEW
MB-0216-1
September 2010
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
1/5
Features
General Specifications
MX47 Series
Compact Waterproof Automotive Connectors
•No. of Contacts: 39 pos.
(Different keying available)
•Contact Resistance:
5m ohm max. (initial)
10m ohm max. (after test)
•Rated Current: 3A
•Connector Insertion Force: 100 N max.
•Waterproof: 98 kPa min. (initial)
•Vibration Resistance:
20G (50 to 1000Hz) each pole / 9 hours
•Applicable Cable: AVSS 0.3 to 1.25sq
•Operating Temperature:
-40 Deg. C to +125 Deg. C
JAE has developed the MX47 Series compact, high-density waterproof connector for
automotive applications.
The MX47 Series utilizes a structure similar to the existing MX23A Series waterproof
connector, but is more compact while maintaining a low height.
The applicable cable and performance is equivalent or higher than the MX23A, there is a
guide key for secure mating, and pin terminals have Pb-free compliant complete plating.
Superior vibration resistance makes the connector ideally suited for use in harsh
environments such as the engine areas of both 2 and 4-wheeled vehicles.
•2.5mm horizontal pitch, 3.6mm vertical pitch, 3 row board to wire connector.
•39 position, different keying available.
•Guide key for secure mating.
•Dowels on both side of connector for light press-fit to board for temporary holding.
•Socket terminal is a compact box type which is strong against external force.
•Retainer is a simple structure front cap type which is easy to attach.
•Pin terminal press-fit structure to prevent leakage of potting material.
•Slim type pin terminal with 0.5mm thickness and 1.0mm width.
RoHS Compliant
MB-0216-1
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
2/5
■Socket Connector
Front Cap
Socket Terminal
■Pin Connector
Pin Terminal 1
Pin Terminal 2
Pin Terminal 3
Pin Housing
Component M ater i a l / Fini sh
Socket Housing 30%G F PBT
Seal Ring Silicone Rubber
Grommet Silicone Rubber
Rea r Cov e r 30 %G F PBT
Fr ont Cap 30%G F PBT
Socket Te r m i na l Bras s / Tin plat ing
Grommet
Socket Housing
Seal Ring
Front Cap
Rear Cover
Component M at e r i al / Fi nish
Pi n Housi ng 30% GF PBT
Pi n Ter m inal 1, 2, 3 Bra ss / Ti n plati ng
Socket Terminal
Structure, Materials and Finishes
MB-0216-1
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
3/5
■Socket Housing (Available with different keying)
■Front Cap (Same for different keying product)
Part Number: MX47039XF1
SJ Drawing: SJ109558
Part Number: MX47039SF1
SJ Drawing: SJ109556
Product Drawing
(Pitch)
(Pitch)
Company Emblem, Cavity Mark
MB-0216-1
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
4/5
■Pin Connector (Available with different keying)
Part Number: MX47039NF1
SJ Drawing: SJ109562
■Socket Terminal (Two other sizes available according to wire size.)
Part Number: M47S65H2FA
SJ Drawing: SJ109559
B105121
適合基板寸法(参考)
Applicable Dimensions of Board
(For reference)
Lot Number
(Pitch)
Company Emblem,
Cavity Mark
Material
MB-0216-1
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
5/5
JapanAviation Electronics Industry, Limited
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
Notice: Products shown in this leaflet are
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Telecommunication devices (Terminals, Mobile
devices), AV devices, Household applications, FA
devices, etc.
Handling Instructions
Specifications
ET-MX47
Part Number SJ Drawing Remarks
MX47039NF1 SJ109562 Standard Product
MX47039NF2 SJ109563 Different Keying Product
MX47039SF1 SJ109556 Standard Product
MX47039SF2 SJ109557 Different Keying Product
Front Cap MX47039XF1 SJ109558 Can be used for both standard
and different keying products
M47S65H4FA SJ109561
M47S65H3FA SJ109560
M47S65H2FA SJ109559
Dummy Plug M120-55780 SJ036379 Same as MX23A Connector
Refer to below for
applicable wire and Tooling.
Socket Terminal
Socket Connecto
r
Pin Connector
Socket Terminal Applicable Wire Hand Crimp Tool Semi-Automatic
Applicator
M47S65H4FA 0.3~0.5mm
2
, φ1.4~1.6
AVSS 0.3, 0.5 equivalent CT160-3-MX47
M47S65H3FA 0.75~0.85mm
2
, φ1.8
AVSS0.85 equivalent CT160-3B-MX47
M47S65H2FA 1.25mm
2
, φ2.1
AVSS1.25 equivalent CT160-3C-MX47
3502-MX47-2
Terminal Removal Tool
Crimp Tools
Product Line-up
JACS-10621
JAHL-10621
