https://www.phoenixcontact.com/us/products/1019518 Flush-type connector-SACC-E-MS-5CON-M16/0,5-18AWG-1019518 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Key Commercial Data Packing unit 1 pc Minimum order quantity 100 pc GTIN GTIN 4055626514772 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Fixed cable length 0.5 Ambient conditions Ambient temperature (operation) -25 ... -85 General Standards/regulations according to IEC61076-2-101 Insertion/withdrawal cycles > 100 Overvoltage category III Mounting type Front wall/screw mounting Coding A-coded Thread type M16 x 1.5 Cable cross section 0.75 Rated surge voltage 1.5 kV AC Degree of pollution 3 Degree of protection IP67 Number of positions 5 11/23/2020Page1/4 https://www.phoenixcontact.com/us/products/1019518 Flush-type connector-SACC-E-MS-5CON-M16/0,5-18AWG-1019518 Technical data General Current 4A Voltage 60 V Connection data Connection method Individual wires Standards and Regulations Standards/specifications according to IEC61076-2-101 Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. * WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. * WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. * The products are suitable for applications in plant, controller, and electrical device engineering. * When operating the connectors in outdoor applications, they must be separately protected against environmental influences. * Assembled products may not be manipulated or improperly opened. * Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). * When using the product in direct connection with third-party manufacturers, the user is responsible. * For operating voltages > 50V AC, conductive connector housings must be grounded * Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. * Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product * Only use tools recommended by PhoenixContact * Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products * Ensure that the protective or functional ground has been properly connected. 11/23/2020Page2/4 https://www.phoenixcontact.com/us/products/1019518 Flush-type connector-SACC-E-MS-5CON-M16/0,5-18AWG-1019518 Technical data Standards and Regulations * VDE 0100/1.97 411.1.3.2 and DIN EN 60 204/11.98 14.1.3 are applicable when combining several circuits in a cable and/or connector * The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Classifications eCl@ss eCl@ss 10.0.1 27440109 eCl@ss 11.0 27440109 eCl@ss 8.0 27440103 eCl@ss 9.0 27440103 ETIM ETIM 5.0 EC002061 ETIM 6.0 EC002061 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01687 11/23/2020Page3/4 https://www.phoenixcontact.com/us/products/1019518 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 11/23/2020Page4/4