66 IJUNE 2013
%
%
TPC Series
Low ESR TACmicrochip®
• Low ESR TACmicrochip® capacitor
• Smallest and low profile tantalum
• CV range: 1.0-100μF / 3-25V
• 4 case sizes available
• Power supply applications
CASE DIMENSIONS: millimeters (inches)
Termination Minimum
Code EIA EIA
L+0.20 (0.008) W+0.15 (0.008) H+0.15 (0.008)
Spacing(S) Termination
Code Metric -0.00 (0.000) -0.00 (0.000) -0.00 (0.000) Length (Lt)
H0805 2012-10 2.00 (0.079) 1.35 (0.053) 1.00 (0.039) max 0.70 (0.028) min 0.15 (0.006)
K0402 1005-07 1.00 (0.039) 0.50 0.50 0.40 (0.016) min 0.10 (0.004)
(0.020 ) (0.020 )
L0603 1608-10 1.60 (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006)
R0805 2012-15 2.00 (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006)
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 1.0 μF to 100 μF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.01CV or 0.5μA whichever is the greater
Rated Voltage (VR)+85°C: 3 4 6.3 10 16 20 25
Category Voltage (VC)+125°C: 2 2.7 4 7 10 13 17
Surge Voltage (VS)+85°C: 3.9 5.2 8 13 20 26 32
Surge Voltage (VS)+125°C: 2.6 3.2 5 8 12 16 20
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
TPC
Type
TACmicrochip®
R
Case Size
See table
above
106
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC
Voltage
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
1800
ESR in mΩ
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
R
Packaging
R, P = 7" Standard Tin
Termination Plastic Tape
X, Q = 414" Standard Tin
Termination Plastic Tape
A, M = 7" Gold Termination
Plastic Tape
F, N = 4 14" Gold Termination
Plastic Tape
LEAD-FREE COMPATIBLE
COMPONENT
JUNE 2013 I67
Capacitance Voltage Rating DC (VR) at 85°C
μF Code 3.0V 4.0V 6.3V 10V 16V 20V 25V
1.0 105 L(5000) R(3000)
1.5 155
2.2 225 K(8000)/L(5000) L(5000) L(5000)
3.3 335 L(5000)
4.7 475 K(8000) L(5000)(M) R(1500)
(M)
*
6.8 685
10 106 L(4000)(M) H(2500) R(1800)
L(4000)(M),R(1800)
15 156 R(1800) R(1500)
22 226 L(5000)(M)/R(1800) R(1500) R(1500)
33 336 R(1800) H(1500)(M)/R(1500) R(1500)(M)
47 476 R(1500) R(1800)(M)
68 686
100 107 R(1000)(M)
TPC Series
Low ESR TACmicrochip®
LOW ESR RANGE
(LETTER DENOTES CASE SIZE)
Codes shown are examples of ESR values offered on certain CV and case size.
Other codes and ESR values available upon request.
Released codes
(M tolerance only)
*Code under development – subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards
68 IJUNE 2013
TPC Series
Low ESR TACmicrochip®
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX EIA Case Cap Voltage (μA) %
Max. (mΩ)
MSL
Part No. Size (μF) (V) Max. Max. @100kHz 25°C 85°C 125°C 25°C 85°C 125°C
3 Volt @ 85ºC (2 Volt @ 125ºC)
TPCK475*003#8000 0402 K 4.7 3 0.5 12 8000 1 0.043 0.039 0.017 0.346 0.312 0.139
TPCR336*003#1800 0805 R 33 3 1.0 10 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
TPCR476*003#1500 0805 R 47 3 1.5 10 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
4 Volt @ 85ºC (2.7 Volt @ 125ºC)
TPCL226M004#5000 0603 L 22 4 0.9 6 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCR226*004#1800 0805 R 22 4 0.9 8 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
TPCH336M004#1500 0805 H 33 4 1.3 14 1500 1 0.163 0.147 0.065 0.245 0.221 0.098
TPCR336*004#1500 0805 R 33 4 1.3 10 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
TPCR107M004#1000 0805 R 100 4 4.0 30 1000 1 0.212 0.191 0.085 0.212 0.191 0.085
6.3 Volt @ 85ºC (4 Volt @ 125ºC)
TPCK225*006#8000 0402 K 2.2 6.3 0.5 8 8000 1 0.043 0.039 0.017 0.346 0.312 0.139
TPCL225*006#5000 0603 L 2.2 6.3 0.5 6 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCL106M006#4000 0603 L 10 6.3 0.6 10 4000 1 0.079 0.071 0.032 0.316 0.285 0.126
TPCR156*006#1800 0805 R 15 6.3 0.9 8 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
TPCR226*006#1500 0805 R 22 6.3 1.4 10 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
TPCR476M006#1800 0805 R 47 6.3 3.0 20 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
10 Volt @ 85ºC (7 Volt @ 125ºC)
TPCL105*010#5000 0603 L 1.0 10 0.5 6 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCL225*010#5000 0603 L 2.2 10 0.5 6 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCL335*010#5000 0603 L 3.3 10 0.5 8 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCL475M010#5000 0603 L 4.7 10 0.5 10 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCH106*010#2500 0805 H 10 10 1.0 8 2500 1 0.126 0.113 0.050 0.100 0.09 0.040
TPCL106M010#4000 0603 L 10 10 1.0 20 4000 1 0.079 0.071 0.032 0.316 0.285 0.126
TPCR106*010#1800 0805 R 10 10 1.0 8 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
TPCR156*010#1500 0805 R 15 10 1.5 10 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
TPCR226*010#1500 0805 R 22 10 2.2 14 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
TPCR336M010#1500 0805 R 33 10 3.3 20 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
16 Volt @ 85ºC (10 Volt @ 125ºC)
TPCL225*016#5000 0603 L 2.2 16 0.5 10 5000 1 0.071 0.064 0.028 0.354 0.318 0.141
TPCR106*016#1800 0805 R 10 16 1.6 10 1800 1 0.158 0.142 0.063 0.285 0.256 0.114
20 Volt @ 85ºC (13 Volt @ 125ºC)
TPCR475M020#1500 0805 R 4.7 20 0.9 8 1500 1 0.173 0.156 0.069 0.260 0.234 0.104
25 Volt @ 85ºC (17 Volt @ 125ºC)
TPCR105*025#3000 0805 R 1.0 25 0.5 8 3000 1 0.122 0.110 0.049 0.367 0.331 0.147
RATINGS & PART NUMBER REFERENCE
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.
For typical weight and composition see page 144.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.