Y92A-72C - OMRON - Datasheet.Live

CSM_H5S_DS_E_9_1

Digital Time Switch

H5S

Easier, More Convenient Time Switches, with

New 4-circuit Output and Yearly Models in

Addition to 2-circuit Weekly Models

• Independent Day Keys provide easier operation.

• Temporary holiday setting function makes it easy to turn OFF

output for holidays and non-operating days.

• Settings can be made even with the Time Switch turned OFF.

• Test mode enables easy program checking.

• Complies with EMC Directives, UL/CSA, and other safety

standards.

• Includes summer time (DST) adjustment.

Yearly models also offer automatic switching to DST.

• Set value can be changed both upward and downward for

speedier setting.

• Integrated temperature compensation circuit helps keep

accurate time over a wide temperature range. (See note 1.)

• Includes time counter and total counter functions with alarm

indicator. (See note 2.)

• Bank function allows program switching by an external input.

(See note 3.)

• New 4-circuit output models with a compact, 72 × 72-mm DIN

size added to the series.

Note: 1. Available only on yearly models.

2. Available only on 2-circuit models.

3. Available only on weekly models.

Features

Easier and More Convenient to Use

■Simple Setting

■Convenient Functions

Time Counter/Total Counter Functions (See note.)

This function makes it possible to monitor the total time that a load

has been applied, or the total number of operating cycles. It allows

the Time Switch to be used for managing maintenance.

Time Adjustment Function (See note.)

The time can be set to 00 min 00 s by using an external input. The

times on multiple Time Switches can also be easily synchronized.

Note: Equipped on 2-circuit models.

Independent Day Keys make setting easy.

Up/down set value changing

for speedy setting.

Temporary holidays

(non-operating days)

are also easy to set.

Weekly models: Specify the day.

Yearly models: Specify the date.

With alarm indicator

Shows total lamp ON time

Synchronized!

Master SlaveSlave

H5S

More Applications on New Series Models

Automatic Program Switching by Seasons

The yearly operation can be set to automatically change the weekly

program depending on the season. (See note.)

Note: Up to four seasons can be set for 4-circuit models, and up to

two seasons for 2-circuit models.

Temperature Compensation Circuit Maintains

Accurate Time

A temperature compensation circuit is provided in the yearly models

to maintain accurate time keeping even when the ambient

temperature varies greatly. This ensures precise operation with

minimal time lags all year round, regardless of temperature changes.

Space-saving, Economical 4-circuit Models Added

to the Series

The new 4-circuit models are 72 × 72-mm DIN size. Their space-

saving size allows use in more applications.

Model Number Structure

■Model Number Legend

Note: This model number legend includes combinations that are not available. Please check the “List of Models” for availability.

1. Control cycle

W: Weekly

Y: Yearly

2. Mounting method

None: Flush mounting

F: Surface mounting/track mounting

3. Panel language

B: English

A: Japanese

4. Number of outputs

2: 2 circuits

4: 4 circuits

5. Supply voltage

None: 100 to 240 VAC

D: 24 VDC

6. Time accuracy

None: Standard

X: With temperature compensation

Yearly Models

Spring Summer Autumn Winter

Mar Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb

Season

(See note 2.)

Spring

17:30 ON

21:00 OFF

Summer

Program

example

19:00 ON

22:00 OFF

Winter

Autumn

18:00 ON

21:00 OFF

17:00 ON

21:00 OFF

4-circuit Models

Control all four

floors with a

single unit.

12345 6

H5S- @@@@@ - @

H5S

Ordering Information

■List of Models

■Accessories (Order Separately)

Specifications

■Ratings

Note: 1. Do not use inverter output as a power supply. For details, refer to Precautions for Safe Use, item 24, on page 12.

2. The capacity is 15 A per circuit, but derating of the total current for two circuits is required as shown below depending on the ambient

temperature.

Control cycle Number of outputs Mounting method Supply voltage Models

Weekly 2 circuits Flush mounting 100 to 240 VAC H5S-WB2

24 VDC H5S-WB2D

Surface mounting/

track mounting

100 to 240 VAC H5S-WFB2

24 VDC H5S-WFB2D

Yearly 2 circuits Flush mounting 100 to 240 VAC H5S-YB2-X

24 VDC H5S-YB2D-X

Surface mounting/

track mounting

100 to 240 VAC H5S-YFB2-X

24 VDC H5S-YFB2D-X

4 circuits Flush mounting 100 to 240 VAC H5S-YB4-X

24 VDC H5S-YB4D-X

Surface mounting/

track mounting

100 to 240 VAC H5S-YFB4-X

24 VDC H5S-YFB4D-X

Name Model

Protective Cover Y92A-72C

Track Mounting Base Y92F-90

Large Terminal Cover (in pairs) Y92A-72H

Item Weekly 2-circuit Models

(H5S-W@2)

Yearly 2-circuit Models

(H5S-Y@2)

Yearly 4-circuit Models

(H5S-Y@4)

Rated supply voltage 100 to 240 VAC (50/60 Hz), 24 VDC (See note 1.)

Operating voltage range AC: 85% to 110% rated supply voltage

DC: 85% to 120% rated supply voltage

Power consumption Approx. 2.9 VA at 264 VAC 60 Hz

Approx. 0.8 W at 28.8 VDC

Approx. 3.2 VA at 264 VAC 60 Hz

Approx. 0.9 W at 28.8 VDC

Approx. 3.5 VA at 264 VAC 60 Hz

Approx. 1.0 W at 28.8 VDC

Control

outputs

Number of circuits SPST-NO × 2 circuits SPST-NO × 4 circuits

Circuits Power supply circuit and other (no-voltage) circuit

Capacity Resistive load

(cosφ = 1)

15 A at 250 VAC (See note 2.) 3 A at 250 VAC

Inductive load 10 A at 250 VAC (cosφ = 0.7) 2 A at 250 VAC (cosφ = 0.4)

Ambient operating temperature −10 to 55°C (with no icing or condensation)

Ambient operating humidity 25 to 85%

Storage temperature −25 to 65°C (with no icing or condensation)

Case color Light gray (Munsell 5Y7/1)

10 0 20 40 50 55 60 80

Ambient temperature (°C)

Total current (A)

H5S

■Characteristics

Note: 1. The total error including the repeat accuracy, setting error, variation due to voltage change, and variation due to temperature change is

±0.01% ±0.05 s max.

2. The time given for memory protection is the calculated time of when power is not being supplied (including during storage) at an ambient

temperature of 25°C. The timer functions and set program are backed up by a lithium battery that is built into the Time Switch. These

will be lost if the life of the battery expires. If the lithium battery is replaced (if the PCB is replaced), the stored contents will also be lost.

Item Weekly 2-circuit Models

(H5S-W@2)

Yearly 2-circuit Models

(H5S-Y@2)

Yearly 4-circuit Models

(H5S-Y@4)

Accuracy of operating

time

±0.01%±0.05 s max. (See note 1.)

The ±0.01% value applies to the set time interval.

Setting error

Influence of voltage

Influence of temperature

Cyclic error ±15 s per month (at 25°C) ±15 s per month (at −10 to 45°C), ±20 s per month (at 45 to 55°C)

Memory protection Continuous use: 5 years min. (at 25°C) (See note 2.)

Insulation resistance 100 MΩ min. (between current-carrying terminals and exposed non-current carrying metal parts, between operation

circuit and control output circuit, between control output circuits, and between non-continuous contacts.)

Dielectric strength 2,950 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current carrying metal parts)

2,000 VAC, 50/60 Hz for 1 min (between operation circuit and control output circuit, and between control output

circuits)

1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)

Noise immunity ±1,500 V (between power terminals, for AC power models), ±500 V (between power terminals, for DC power models)

Square-wave noise by noise simulator (pulse width: 100 ns, for 1 μs, 1-ns rise time)

Vibration

resistance

Destruction 10 to 55 Hz with 0.375-mm single amplitude in 3 directions for 2 hours each

Malfunction 10 to 55 Hz with 0.25-mm single amplitude in 3 directions for 10 minutes each

Shock

resistance

Destruction 300 m/s2 3 times each in x, y, and z axes, 6 directions

Malfunction 100 m/s2 3 times each in x, y, and z axes, 6 directions

Life

expectancy

Mechanical 100,000 operations min.

Electrical 50,000 operations min. (15 A at 250 VAC, resistive load)

50,000 operations min. (10 A at 30 VDC, resistive load)

50,000 operations min. (10 A at 250 VAC, inductive load (cosφ = 0.7))

50,000 operations min. (1 HP at 250 VAC, motor load)

50,000 operations min. (100 W at 100 VAC, lamp load)

10,000 operations min. (300 W at 100 VAC, lamp load)

50,000 operations min. (3 A at

250 VAC, resistive load)

50,000 operations min. (3 A at

30 VDC, resistive load)

Approved standards CURUS: UL 508/CSA C22.2 No.14,

Conforms to EN 60730-2-7(Pollution degree 2/overvoltage category II),

Conforms to VDE 0106/part100.

Conforms to Electrical Appliance and Material Safety Law (for Japan)

EMC (EMI) EN 60730-2-7

EMI Radiated: EN 60730-2-7 (CISPR 22 Class B)

EMI Conducted (Continuous): EN 60730-2-7 (CISPR 22 Class B)

EMI Conducted (Non-continuous): EN 60730-2-7 (CISPR 14-1)

Harmonic Current: EN 60730-2-7 (IEC 61000-3-2 Class A)

Voltage fluctuation/flicker: EN 60730-2-7 (IEC 61000-3-3)

(EMS) EN 60730-2-7

ESD Immunity: EN 60730-2-7 (IEC 61000-4-2): 6 kV contact discharge

8 kV air discharge

Radiated Electromagnetic Field Immunity: EN 60730-2-7 (IEC 61000-4-3): 10-V/m AM modulation

(80 MHz to 1 GHz, 1.4 GHz to 2 GHz)

10-V/m pulse modulation (900 MHz)

Conducted Disturbance Immunity: EN 60730-2-7 (IEC 61000-4-6): 10 V (0.15 to 80 MHz)

Burst Immunity: EN 60730-2-7 (IEC 61000-4-4): 2 kV power line

1 kV control line

Surge Immunity: EN 60730-2-7 (IEC 61000-4-5): 1 kV line to line (power line, output line)

2 kV line to ground (power line, output

line)

0.5 kV line to line (input line)

1 kV line to ground (input line)

Voltage Dip/Interrupting Immunity: EN 60730-2-7 (IEC 61000-4-11): 0.5-s cycle, 100% (rated voltage)

Weight Approx. 200 g

H5S

■Operation

Note: 1. Depending the operation, the following steps can be used for weekly programs.

Timer operation: 2 steps

Pulse-output operation: 1 step

Cyclic operation: 4 steps

2. When the season switching setting is not being used.

3. When the season switching setting is being used.

■Operation Functions

Item Weekly 2-circuit Models

(H5S-W@2)

Yearly 2-circuit Models

(H5S-Y@2)

Yearly 4-circuit Models

(H5S-Y@4)

Operation method Digital quartz

Operation period 1 week (7 days) 1 year (with integrated calendar to 2099)

Display • Day, hrs (switchable between 24-hr indication and a.m./p.m. 12-hr indication), minutes, seconds

(0.00 to 23:59, 0.00 to 11:59 a.m., 0.00 to 11:59 p.m.)

•Digital indication by LCD (character height: 10 mm)

•Digital display of operation schedule during operation

•Timing chart display of operation schedule during operation

Min. setting unit 1 min

Number of

steps that

can be set

Weekly program

(See note 1.)

40 steps/circuit 48 steps/circuit (See note 2.)

24 steps/circuit (per season) (See

note 3.)

48 steps/circuit (See note 2.)

12 steps/circuit (per season) (See

note 3.)

Yearly program --- 4 yearly programs/circuit

Number of

settable yearly

temporary

holiday settings

--- 16

Item Weekly 2-circuit Models (H5S-W@2) Yearly 2-circuit Models (H5S-Y@2) Yearly 4-circuit Models (H5S-Y@4)

Weekly timer

operation

Controls the output according to the set time of ON and OFF.

•Min. setting unit: 1 min

•Multiple-day operation also possible.

Weekly pulse-

output

operation

Output turns ON for a fixed period (pulse width) at the set ON time.

•Pulse width: 1 to 59 s (in 1-s increments), or 1 to 60 min (in 1-min increments)

•The pulse width can be set for each step.

Weekly cyclic

operation

Repeatedly turns ON and OFF during the period from the cyclic start time to the stop time.

Independent ON- and OFF-time settings are possible.

•Min. setting unit: 1 min

(The ON time width and OFF time width can each be set to between 1 minute

and 11 hours 59 minutes.)

The timer operation repeatedly turns the signal ON and OFF for the time widths specified

by the ON time and OFF time during the period from the day of the week and time that are

set for the cyclic start time to the day of the week and time that are set for the stop time.

Yearly timer

operation

--- Adds a yearly timer operation to the weekly timer program.

For details, refer to About Yearly Programs on page 18.

Yearly pulse-

output

operation

--- Adds a yearly pulse-output operation to the weekly pulse-output program.

For details, refer to About Yearly Programs on page 18.

Temporary

holiday setting

Sets temporary holidays (non-operating days) without having to revise the existing program.

For details, refer to Setting Temporary Holidays (Weekly) and Setting Temporary Holidays (Yearly) on page 20.

Day override

operation

Executes the operation for one day

temporarily on another day in the 7-day

period starting from the current day.

For details, refer to Day Override

Operation on page 21.

---

Program check Consecutively displays the days and times when the output is set to turn ON and OFF over the course of one week in the

sequence in which the Time Switch is to operate.

For details, refer to Program Check Function on page 21.

ONOFF

Timer operation

Pulse output operation

Pulse width

Cyclic operation

StopStart ON

OFF

()

H5S

Checking the

settings

Consecutively displays the times when the output is set to turn ON and OFF for one day in the sequence in which the Time

Switch is to operate.

For details, refer to Checking the Settings on page 21.

Forced ON/OFF

operation

Allows the output to be forcibly turned ON/OFF by the Output ON/OFF Switch regardless of the control output setting.

Override and

automatic

return

operation

Allows the control output to be maintained in the ON (or OFF) state until the next OFF (or ON) time. This operation is controlled

by using the Output ON/OFF Switch and Write Key. When completed, the Time Switch automatically resumes the previously

set operation.

For details, refer to Override and Automatic Return Operation on page 22.

Summertime

(DST)

adjustment

Switches the current time from “current time” to “current time + 1 h” for daylight savings time. Yearly models also offer automatic

switching to daylight savings time.

For details, refer to Manual Summer Time (DST) Adjustment on page 21.

Time counter/

total counter

display

Displays the total elapsed time and total count of external input. It also displays a

warning when a set value is entered.

For details, refer to Time Counter/Total Counter Display (F2, F3, F4) on page 23.

---

Time

adjustment

input

Allows the time to be set to 00 min 00 s at the same time as an external input is

applied.

For details, refer to Time Adjustment Input Function (F2) on page 24.

---

Manual

operation on

recovery from

power failure

Allows the output state to be specified following recovery from a power failure.

For details, refer to Manual Operation on Recovery from Power Failure (F2) on page

24.

---

Bank switching Allows two groups (banks) of programs to

be registered and switched by external

input.

For details, refer to Bank Switching (F2)

on page 24.

---

Season

switching

--- Allows weekly programs to be automatically switched in response to seasons

throughout the year.

For details, refer to Season Switching/Period of Season (F8/F9) on page 24.

Power OFF

settings

Allows the display to remain lit even when the power is turned OFF, and settings to be made for all functions except Override

and Automatic Return Operation.

•The display illumination will turn OFF when there has been no operation for 2 min. The display will light again when any key

other than a slide switch is pressed for at least 1 s.

•No output will be generated.

Item Weekly 2-circuit Models (H5S-W@2) Yearly 2-circuit Models (H5S-Y@2) Yearly 4-circuit Models (H5S-Y@4)

H5S

Connections

■Terminal Arrangement

H5S-@A@/-@B@ Flush Mounting Models

Two-circuit Models Four-circuit Models

H5S-@FA@/-@FB@ Surface Mounting Models

Two-circuit Models Four-circuit Models

Note: 1. The Time Switch output uses a no-voltage contact. An external power supply is required for applications in which a load is driven.

2. The output contact ratings are different for 2-circuit and 4-circuit models.

■Input Connection (Two-circuit Models Only)

Use a switch or relay as the input contact.

Use a contact that is capable of operating with 5 V, 0.1 A (with a minimum signal input width of 100 ms).

One of the following functions can be assigned to the input.

•Time Counter/Total Counter Display

•Time Adjustment

•Manual Operation on Recovery from Power Failure

•Bank Switching

Note: Input must be selected using the “F2: Input selection” step of initial setting mode. For details, refer to Using Advanced Functions on page 23.

Output 2

Output 1Power

source

Input

∼−

∼

(Rear View)

H JI

DCB

Output 2 Output 3

Output 4

Output 1Power

source

∼−

∼

(Rear View)

Output 2Input

Output 1 Power

source

−

∼+

∼

(Front View)

FGHI

CB DE

Output 2Output 3

Output 4

Output 1 Power

source

−

∼+

∼

(Front View)

Flush mounting models

(H5S-@A2@/-@B2@)

Surface mounting models

(H5S-@FA2@/-@FB2@)G

H5S

Nomenclature

Front Panel (with Cover Open)

Weekly Two-circuit Models

Yearly Two-circuit Models

Yearly Four-circuit Models

Key Operations

Note: To enable operation according to the settings that you made,

first make the settings and then set the Output ON/OFF Switch

(12) to AUTO and the Mode Switch (1) to RUN.

13. Day Keys

10. Time Adjustment

Key

12. Output

ON/OFF

Switches

1. Mode

Switch

2. Holiday/

Down Key

3. Write Key

4. m/Pulse Key

5. h Key

6. Reset Key

7. +1h/Clear

Key

8. Copy/Cycle Key

9. Test

Key

11. Output

Setting

Switches

13. Day Keys

10. Time Adjustment

Key

12. Output

ON/OFF

Switches

1. Mode

Switch

2. Holiday/

Down Key

3. Write Key

4. m/Pulse Key

5. h Key

6. Reset Key

7. +1h/Clear

Key

8. Cycle Key

9. Test/

Year

Key

11. Output

Setting

Switches

13. Day Keys

10. Time Adjustment

Key

12. Output

ON/OFF

Switches

1. Mode

Switch

2. Holiday/

Select Program/

Down Key

3. Write Key

4. m/Pulse Key

5. h Key

6. Reset Key

7. +1h/Clear

Key

8. Cycle Key

9. Test/

Year

Key

11. Output

Setting

Switches

No. Functions

1Two-circuit Models

P1: Circuit (output) 1 Setting mode

P2: Circuit (output) 2 Setting mode

RUN: RUN mode

Four-circuit Models

PRGM: Setting mode (allows use of the Select Program Key

to set the circuit (output) number)

RUN: RUN mode

2Two-circuit Models

In RUN mode, this key shifts the Time Switch to the Holiday

Setting mode

In Setting mode or Time Adjustment mode, this key

decrements the value for the operation just completed.

Four-circuit Models

In RUN mode, this key shifts the Time Switch to the Holiday

Setting mode.

When selecting the output, this key is used to set the circuit

(output) number.

In Setting mode or Time Adjustment mode, this key

decrements the value for the operation just completed.

3Sets parameters.

4Used to set the current time, ON/OFF time, or pulse width.

6Used to reset all parameters, including the current time.

7In RUN mode, this key sets or cancels summer time (+1 h)

In Setting mode, this key clears the parameter.

8In RUN mode (weekly models only), this key shifts the Time

Switch to the Day Override operation setting mode.

In Setting mode, this key shifts the Time Switch to cyclic

operation setting.

9In RUN mode, this key shifts the Time Switch to the Program

Check mode.

In Setting mode (yearly models only), this key is used to set

the yearly program.

10 This key shifts the Time Switch to the time adjustment mode.

11 TIMER: Executes a timer or cyclic operation.

PULSE: Executes a pulse-output operation.

12 ON: Turns ON the output regardless of the setting.

AUTO: Executes automatic operation as specified by these

settings.

OFF: Turns OFF the output regardless of the setting.

13 • Used to set the current day, operating day, etc.

•Used to specify the date (yearly models only)

•In RUN mode, these keys are used to shift the Time Switch

to the Checking the Settings mode.

H5S

Display

Display Description

No. Function

1Lights when power is supplied to the Time

Switch.

2When 12-hour display is selected, either AM

or PM lights. (24-hour display is the default.)

3Lights when summer time (+1 h) is activated.

4Displays the current time and other values.

5Displays the unit for the pulse width.

6Lights when the total time or count value

exceeds the alarm setting.

7Displays the number of remaining steps for

programming in setting mode.

8Displays the number of the circuit (output)

that has been set.

9Displays the time for the next operation, the

date (yearly models only), and other values.

10 Displays the next operation and other

information in chart form.

11 Displays the bank name (weekly models) or

season name (yearly models).

12 Lights when setting the ON/OFF time or

when setting a day override operation.

13 Lit during the temporary holiday operation or

when setting a temporary holiday.

14 Lit during the day override operation or when

setting a day override operation.

15 Lit during setting a yearly program.

16 Flashes during the Time Adjustment mode.

17 Displays the current day or the day set for an

operation.

18 Displays the number of the circuit (output) for

which output is ON.

Weekly Two-circuit Models

5. Pulse width unit indicator

4. Main display

9. Sub-display

10. Timing chart display

17. Day indicator

11. Bank indicator

12. From/To indicator

14. Copy indicator

1. Power indicator

2. AM/PM indicator

3. Summer time indicator

2. AM/PM indicator

13. Holiday indicator

7. Display of number

of remaining steps

8. Set circuit number

indicator

6. Total value alarm

indicator

18. Output circuit number

indicator

16. Time adjustment mode

indicator

Yearly Two-circuit Models

4. Main display

9. Sub-display

10. Timing chart display

17. Day indicator

11. Season indicators

12. From/To indicator

13. Holiday indicator

1. Power indicator

2. AM/PM indicator

3. Summer time indicator

2. AM/PM indicator

15. Year indicator

7. Display of number

of remaining steps

8. Set circuit number

indicator

6. Total value alarm

indicator

16. Time adjustment mode

indicator

5. Pulse width unit

indicator

18. Output circuit number

indicator

Yearly Four-circuit Models

4. Main display

9. Sub-display

10. Timing chart display

17. Day indicators

11. Season indicator

12. From/To indicator

13. Holiday indicator

1. Power indicator

2. AM/PM indicator

3. Summer time indicator

2. AM/PM indicator

15. Year indicator

7. Display of number

of remaining steps

8. Set circuit number

indicator

16. Time adjustment mode

indicator

5. Pulse width unit

indicator

18. Output circuit number

indicator

H5S

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Digital Time Switch

Mounting bracket (included)

Four M3 x 8 screws (included) for mounting

the terminal covers

Two terminal covers (included)

Two M4 x 12 screws (included)

for the mounting bracket

Protective Cover

Y92A-72C (Order separately)

9.5 (53.2)

(75 × 75)

(12.5)

67.6 × 67.6

68+

0.8

68+

0.8

9.5 49

Mounting panel

H5S

TIME SWITCH

Flush Mounting Model

H5S-@A@/-@B@

Note: 1. The terminal screws are M3.5.

2. This illustration shows a 2-circuit model. The 4-circuit model

has the same dimensions.

Panel Cutout

Note: Panel thickness: 1 to 5 mm

Protective Cover

Y92A-72C (Order separately)

Y92F-90 DIN Track

Mounting Base

(Order separately)

Four M3 x 8 screws (included)

for mounting terminal covers

Two terminal covers (included)

(9.5)

49 (20.2)

(75 × 75)

(61.5)

58.5

Mounting holes

for four M4 screws 63.2

96 89 72

Mounting panel

89±0.2

56±0.15

4-dia. *

Panel thickness t

Hole diameter

0.8 to 1.2

3.6

1.6 to 4

3.7

*Diameter of pilot holes for

included M4 tapping screws (guideline)

17.7

Four M3 x 8 screws for

mounting the Y92A-72H

Large Terminal Cover

(included with the Y92A-72H)

Y92A-72H Large Terminal Cover

(Order separately)

66.7

126.7

Use a tool such as long nose pliers to prepare the openings for pulling wires.

When using the product

in an exposed mounting

condition, always use the

Y92A-72H Large

Terminal Cover (order

separately) to comply

with Electrical Appliance

and Material Safety Law

(for Japan).

71.1 *1

79.8 *2

Y92F-90 DIN Track Mounting Base

(Order separately)

DIN Track

Mounting panel

H5S

TIME SWITCH

Surface Mounting Model

H5S-@FA@/-@FB@

Note: 1. The terminal screws are M3.5.

2. This illustration shows a 2-circuit model. The 4-circuit model

has the same dimensions.

Mounting holes

(Surface mounted)

(With the large terminal cover (order separately) attached) (DIN track mounted)

Note: 1. Using a PFP-50N or PFP-100N

Mounting Track.

2. Using a PFP-100N2 Mounting Track.

H5S

■Accessories (Order Separately)

■Track Mounting Accessories (Order Separately)

Protective Cover

Y92A-72C

DIN Track Mounting

Base

Y92F-90

Note: The DIN Track Mounting Base can be

used only with the surface mounting

models (H5S-@FA@/-@FB@).

Large Terminal Covers

Y92A-72H (two per set)

Note: The Large Terminal Cover can be

used only with the surface mounting

models (H5S-@FA@/-@FB@).

±0.3

7.3

±0.15

4.5

15 25 25

10 15 (5) *

25 25

* The numbers in parentheses ( ) are dimensions for the PFP-50N

1,000 (500) *

Mounting Track

PFP-100N

PFP-50N

15 25 25

1,000

4.5

25 25 15

10 1

242735

±0.3

1.5

29.2

PFP-100N2

4.8

1.3

35.5 35.3

1.8

6.2

M4 spring washer

11.5

M4 × 8

pan-head

screw

End Plate

PFP-M 5

44.3

34.8

16.5

Spacer

PFP-S

H5S

Safety Precautions

!CAUTION

■Precautions for Safe Use

Please comply strictly with the following instructions which are

intended to ensure safe operation of the product.

1. Have the Time Switch installed only by qualified electrical

workers.

2. Store the Time Switch within the specified ratings. If the Time

Switch has been stored at temperatures of −10°C or lower, let it

stand for three hours or longer at room temperature before

turning ON the power supply.

3. Mounting the Time Switch side-by-side may reduce the life

expectancies of internal components.

4. Use the Time Switch within the specified ratings for operating

temperature and humidity.

5. Do not operate the Time Switch in any of the following locations.

•Locations subject to sudden or extreme changes in

temperature.

•Locations where high humidity may result in condensation.

6. The Time Switch is not waterproof or oil resistant. Do not use it in

locations subject to water or oil.

7. Do not use the Time Switch in locations subject to excessive dust,

corrosive gas, or direct sunlight.

8. Install the Time Switch well away from any sources of excessive

static electricity, such as pipes transporting molding materials,

powders, or liquids.

9. Maintain voltage fluctuations in the power supply within the

specified range.

10.Internal elements may be destroyed if a voltage outside the rated

voltage is applied.

11.Be sure to wire the terminals correctly and use the correct

polarity.

12.Separate equipment that produces input signals, input signal

wiring, and the Time Switch from noise-generating sources and

high-voltage lines containing noise.

13.Do not connect more than two crimp terminals to each Time

Switch terminal.

14.Up to two wires of the same size and type can be inserted into a

single terminals.

15.Use the specified wires for wiring.

Applicable wire: AWG 22 to AWG 14 (equal to a cross-sectional

area of 0.326 to 2.081 mm2)

Solid wire or twisted wire

Material: Copper

16.Install a switch or circuit breaker that allows the operator to

immediately turn OFF the power, and label it to clearly indicate its

function.

17.Take adequate protective measures (such as a breaker, or fuse)

for the power supply of the Time Switch.

18.When using heaters, be sure to use a thermal switch for the load

circuit.

19.Always maintain the load current within specifications.

20.Use a switch, relay, or other contacts so that the rated power

supply voltage will be reached within 0.1 s. If the power supply

voltage is not reached quickly enough, the power source may fail

to reset or the outputs may fail to operate correctly.

21.Use a switch, relay, or other contact to turn the power supply OFF

instantaneously. Outputs may malfunction and memory errors

may occur if the power supply voltage is decreased gradually.

22.The Time Switch utilizes a transformerless power supply. Do not

touch the input terminal while power is being supplied; touching

live terminals may result in electric shock.

23.Use the Time Switch within the specified ratings for vibration and

shock.

24.Use a commercial power supply when using AC power supply

voltage input.

Although some inverters specify their output frequency as 50/

60 Hz, smoke or burning may occur from a rise in internal

temperature. Do not use inverter output as the power supply.

25.Do not leave the Time Switch for long periods at a high

temperature with output current in the ON state. Doing so may

result in the premature deterioration of internal components (e.g.,

electrolytic capacitors).

26.Do not use organic solvents (such as paint thinner or benzine),

strong alkaline, or strong acids to clean the case because they

will damage the external finish.

27.None of the Time Switch components are user-replaceable,

including the battery.

28.Use a tool such as long nose pliers to prepare the openings for

pulling wires out of the optional Y92A-72H Large Terminal Cover.

Attempts to form an opening by hand may result in injury.

■Precautions for Correct Use

1. When the power is turned ON, an inrush current will flow for a

short time (AC: Approx. 2.5 A (0.3 ms), DC: Approx. 1.1 A (3 ms)).

Depending on the power supply capacity, operation may not start.

Be sure to use a power supply with a sufficient capacity.

2. Inrush current generated by turning ON or OFF the power supply

may deteriorate contacts on the power supply circuit. Use to turn

ON or OFF devices with a rated current of 10 A min.

3. The timer functions and set program are backed up by a battery. If

the life of the battery expires, the display will become irregular or

may fail to function. The battery cannot be replaced by the user.

Contact your OMRON representative.

Minor injury by electric shock may occasionally occur. Do

not touch any of the terminals while power is being

supplied. Be sure to mount the terminal cover after wiring.

When using a surface-mounting model in an exposed

condition, always install the Y92A-72H terminal cover

(separately purchased) to comply with Electrical

Appliance and Material Safety Law (for Japan).

Minor injury due to explosion may occasionally occur. Do

not use the product where subject to flammable or

explosive gas.

Minor electric shock, fire or malfunction may occasionally

occur. Never attempt to disassemble, modify, or repair the

product or touch any of the internal parts.

Fire may occasionally occur. Tighten the terminal screws

to the rated torque (from 0.98 to 1.17 N·m).

Unexpected operation may occasionally occur.

Before changing times or other settings while power is

being supplied, either turn OFF the power on the load

side or set the output ON/OFF switch to OFF and confirm

the safety of the system.

Minor electric shock, fire, or malfunction may occasionally

occur. Do not allow metal fragments, lead wire scraps, or

shavings from installation work to fall inside the Time

Switch.

If the output relay is used beyond its life expectancy, its

contacts may become fused or there may be a risk of

burning. Use the product within its rated load and

electrical life expectancy. The life expectancy of the

output relay varies considerably according to its capacity

and operating conditions.

Serious injury may occasionally occur due to fire or

explosion of a battery, or leakage from a battery. Never

attempt to short the positive and negative terminals,

recharge, disassemble, deform by applying excessive

pressure, or expose the battery to fire.

H5S

■EN/IEC Standards

•The insulation system between the power supply circuit and input-

output terminals provides basic insulation.

Therefore connect the output terminals only to circuits without

exposed conductive parts. If a connection to a Safety Extra Low

Voltage (SELV) circuit is desired, supplementary insulation must be

provided.

•Use crimp type cable lug terminals with insulating sleeves for

wiring.

•Be sure to mount a surface-mounting model (H5S-@FA@/-@FB@)

in an enclosure.

•The relationship between load current and ambient air temperature

is shown by the range below for 2-circuit models.

If wires with a temperature rating of 105 °C or higher are used, refer

to the derating curve in Specifications on page 3.

•Control system: Electronic

Types of automatic operation: Weekly models - Type 1 BSTU

Yearly models - Type 2 BSTU

Protective class: Class 0

Rated impulse withstand voltage: 2,500 V AC

Ball-pressure test temperature (enclosure material): 125°C

Basic Use

Prior to Using

Before setting the parameters necessary for each operation, the operation of each circuit (output) must be determined. Begin by setting initial

setting mode as required.

10 0 20 40 55 60 80

Ambient temperature (°C)

Total current (A)

Open the front cover.

Determine and

set the operation

of each circuit (output).

Set initial setting mode.

The Initial Setting mode must be

set to use the following functions.

Common to all models:

•Next Operation Display Switching

Weekly models:

•

Time Counter/Total Counter Display

•Time Adjustment Input

•Manual Operation on Recovery

from Power Failure

•Bank Switching

Yearly models:

•Time Counter/Total Counter

Display

(See note.)

•

Time Adjustment Input (See note.)

•Manual Operation on Recovery

from Power Failure (See note.)

•Season Switching

•Date Format Selection

•Summer Time (DST) Adjustment

Note: 2-circuit models only

Set as necessary:

Note: Pull the front cover

open with your

fingertips.

Note: Use the tip of a ball-

point pen, or other

sharp instrument, to

make the settings.

For details, refer to Using Advanced Functions on

page 23.

HOLID

AUTO

OFF

OUT

SATFRITHUWEDTUEMONSUN

RUN

OUT1

OUT2

DMY

m/PLS

Timer operation Pulse operatio

OUT

PULSE

TIMER

HOLID

SATFRITHUWEDTUEMONSUN

OUT1

OUT2

TEST

YEAR CYCLE CLEARTIME ADJ

DMY

AUTO

OFF

m/PLS

Note:

These settings

are not required

to use the basic

Time Switch

functions.

To enable operation

according to the

settings that you

made, first make the

settings and then set

the Output ON/OFF

Switch to AUTO and

the Mode Switch to

RUN.

H5S

Time Adjustment (Weekly Models) Time Adjustment (Yearly Models)

Weekly, 2 Circuits

Example: Set the current time to Saturday 17:28.

1. Set the Mode

Switch to RUN. Shaded portion indicates

blinking of the indicator.

2. Press for 2 s or more.

The symbol flashes.

3. Press .

(The bar ( ) mark at the Saturday

position will turn ON.)

Set the time with and . *

4. Press to enter the setting,

and the Time Switch will start from 0

second.

* Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

Note:

•When first turned ON or after a reset,

the time adjustment display appears

on the screen. Adjust the time by

following steps 3 and 4.

•If is pressed again before

pressing , the setting is

cancelled. (The setting is not revised.)

RUN

TIME ADJ

SUN

MON

TUE

WED

THU

FRI

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

TIME ADJ

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

Yearly, 2 Circuits Yearly, 4 Circuits

Example: Set the current time to 17:28 on August 15, 2006.

1. Set the Mode

Switch to RUN.

Shaded portion indicates

blinking of the indicator.

2. Press for 2 s or more.

The symbol flashes.

3. Specify the date by pressing ,

and . *

4. Press .

Set the time with and . *

5. Press to enter the settings,

and the Time Switch will start from 0

second.

* Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

Note:

•When first turned ON or after a reset,

the time adjustment display appears

on the screen. Adjust the time by

following steps 3 through 5.

•If is pressed again before

pressing , the setting is

cancelled. (The setting is not revised.)

2 circuits

RUN

4 circuits

PRGM

RUN

TIME ADJ

Y M

WRITE

TIME ADJ

WRITE

H5S

Ordinary Timer Operation Multiple-day Operation 1

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON at 8:30 and OFF at 17:15 on Monday through Friday.

1. Set the Mode Switch to P1 or P2. *1

(The Time Switch enters program

setting mode.)

→For 4-circuit models, refer to

page 18.

2. Press the Day Keys to turn ON the

bars ( ) at the positions of Monday

through Friday.

Set the ON time with and . *2

3. Press .

Set the OFF time with and . *2

4. Press to enter the settings.

*1 If one or more programs have already been set, the display

starts showing the set programs.

To add another program, press repeatedly until “--:--“

is displayed.

*2 Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

Note:

•If multiple settings are required, repeat steps 2 through 4.

•Both the ON and OFF times must be set.

•All of the weekly programs for the selected circuit (output) can be

checked by pressing in program setting mode.

•When the Mode Switch is set to P1 or P2 (to PRGM for 4-circuit

models), the Time Switch stops automatic operation. To forcibly

turn ON or OFF the output, use the Output ON/OFF Switches.

•The set data will be cleared if the Output Setting Switch is moved

between the TIMER and PULSE positions after the data has been

set.

SUN MON TUE WED THU FRI SAT

8:30 17:15 8:30 17:15 8:30 17:15 8:30 17:15 8:30 17:15

Shaded portion

indicates blinking of

the indicator.

SUN

MON

TUE

WED

THU

FRI

SAT

Number of

remaining steps

RUN

PULSE

TIMER

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON continuously from 8:30 on Monday to 17:15 on Friday.

1. Set the Mode Switch to P1 or P2.*1

(The Time Switch enters program

setting mode.)

→For 4-circuit models, refer to

page 18.

2. Press the Day Keys to turn ON the

bar ( ) at the Monday position.Set

the ON time with and . *2

3. Press .

Press to flash the bar ( ) at

all day positions and press to

turn ON the bar ( ) at the Friday

position.

Set the OFF time with and . *2

4. Press to enter the settings.

*1 If one or more programs have already been set, the display

starts showing the set programs.

To add another program, press repeatedly until “--:--“

is displayed.

*2 Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

8:30 17:15

SUN MON TUE WED THU FRI SAT

Shaded portion

indicates blinking of

the indicator.

SUN

MON

TUE

WED

THU

FRI

SAT

Number of

remaining steps

RUN

PULSE

TIMER

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

MON

FRI

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

H5S

Multiple-day Operation 2 Pulse-output Operation

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON at 22:00 from Monday through Friday and OFF at 8:00

each following morning.

1. Set the Mode Switch to P1 or P2. *1

(The Time Switch enters program

setting mode.)

→For 4-circuit models, refer to

page 18.

2. Press the Day Keys to turn ON the

bar ( ) at the positions of Monday

through Friday.

Set the ON time with and . *2

3. Press .

Press to turn OFF the bar

( ) at the Monday position and

press to turn ON the bar ( )

at the Friday position.

Set the OFF time with and . *2

4. Press to enter the settings.

*1 If one or more programs have already been set, the display starts

showing the set programs.

To add another program, press repeatedly until “--:--“

is displayed.

*2 Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

22 8 22 8 22 8 22 8 22 8

SUN MON TUE WED THU FRI SAT

Shaded portion

indicates blinking of

the indicator.

SUN

MON

TUE

WED

THU

FRI

SAT

Number of

remaining steps

RUN PULSE

TIMER

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

MON

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON for 30 seconds at 8:25 am from Monday through

Saturday.

1. Set the Mode Switch to P1 or P2.*1

(The Time Switch enters program

setting mode.)

→For 4-circuit models, refer to

page 18.

2. Press the Day Keys to turn ON the

bars ( ) at the positions of Monday

through Saturday.Set the ON time

with and . *2

3. Press .

Set the pulse width with . *2

The displayed pulse width changes

by pressing this key in the following

order.

1s→2s…→59s→1m…→59m→60m→1s

4. Press to enter the settings.

*1If one or more programs have already been set, the display starts

showing the set programs.

To add another program, press repeatedly until “--:--“

is displayed.

*2Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

Note:

•If multiple settings are required, repeat steps 2 through 4.

•Both the ON time and pulse width must be set.

•All of the weekly programs for the selected circuit (output) can be

checked by pressing in program setting mode.

•When the Mode Switch is set to P1 or P2 (to PRGM for the 4-

circuit model), the Time Switch stops automatic operation. To

forcibly turn ON or OFF the output, use the Output ON/OFF

switches.

•The set data will be cleared if the Output setting switch is moved

between the TIMER and PULSE positions after the data has been

set.

AM8:25

30 s

SUN MON TUE WED THU FRI SAT

Shaded portion

indicates blinking of

the indicator.

SUN

MON

TUE

WED

THU

FRI

SAT

Number of

remaining steps

RUN

PULSE

TIMER

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

PLS

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

H5S

Cyclic Operation

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON for 5 minutes and OFF for 1 hour 55 minutes

repeatedly from 8:00 to 19:00 on Sunday.

1. Set the Mode Switch to P1 or P2. *1

(The Time Switch enters program

setting mode.)

→For 4-circuit models, refer to

page 18.

2. Press .

(The Time Switch enters cyclic

program setting mode.)

3. Press the Day Keys to turn ON the bar

( ) at the Sunday position.

Set the start time to 8:00 with and

. *2

4. Press .

Set the stop time to 19:00 with

and . *2

5. Press .

Set the ON time period with and

. *2

6. Press .

Set the OFF time period with and

. *2

7. Press to enter the settings.

*1 If one or more programs have already been set, the display starts

showing the set programs.

To add another program, press repeatedly until “--:--“

is displayed.

*2 Holding down the and Keys rapidly advances the value.

Pressing decrements the value of the key that was last

pressed.

The ON time width and OFF time width can each be set to

between 1 minute and 11 hours 59 minutes.

Note:

•If multiple settings are required, repeat steps 2 through 7.

•All the start/stop times, and ON/OFF time periods must be set.

•All of the weekly programs for the selected circuit (output) can be

checked by pressing in program setting mode.

•When the Mode Switch is set to P1 or P2 (to PRGM for 4-circuit

models), the Time Switch stops automatic operation. To forcibly

turn ON or OFF the output, use the Output ON/OFF Switches.

•Set cyclic operation so as not to overlap other operations in

individual circuits.

•The set data will be cleared if the Output Setting Switch is moved

between the TIMER and PULSE positions after the data has been

set.

SUN

8:00

Start

1 h 55 min

5 min

19:00

Stop

Shaded portion

indicates blinking of

the indicator.

SUN

MON

TUE

WED

THU

FRI

SAT

Number of

remaining steps

RUN

PULSE

TIMER

CYCLE

SUN

MON

TUE

WED

THU

FRI

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

H5S

Clearing the Settings

Partial clearing

Clearing all the settings in an entire circuit

Programming for 4-circuit models

The following shows how to program (select the output circuit

number) for 4-circuit models.

About Yearly Programs

Yearly programs in addition to ordinary weekly programs can be set

for 2- and 4-circuit yearly models.

Note: 1. This example combines the following programs.

For details on yearly programming, refer to page 19.

Weekly program

Friday, Saturday, and Sunday: 9:00 (ON time),

18:00 (OFF time)

Yearly program

March 25: 18:00 (ON time), 22:15 (OFF time)

2. For details on automatically switching the weekly program

depending on the season, refer to page 24.

To set multiple-day operation for a yearly program, two yearly

programs must to be set as shown in the following example.

Note: Do not enter a weekly program.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

1. Set the Mode Switch to P1 or P2 and

select the setting to be cleared. Shaded portion indicates

blinking of the indicator.

2. Press briefly.

3. Press to clear the setting. *

1. Set the Mode Switch to the position

for the circuit whose settings are to

be cleared. Shaded portion indicates

blinking of the indicator.

2. Press and hold for 3 s or

more.

3. Press to clear all the settings of the circuit. *

* The clearing operation can be cancelled by pressing

while clr is displayed.

Yearly, 4 Circuits

1. Set the Mode Switch to PRGM.

(The Time Switch enters program

setting mode.)

Shaded portion indicates

blinking of the indicator.

2. Select an output circuit with

. Pressing the key

changes the set circuit number

displayed in the lower right corner of

the LCD.

The rest of the procedure is the same

as for 2-circuit models.

Note: The circuit number cannot be changed during the course of

setting.

CLEAR

WRITE

CLEAR

WRITE

CLEAR

PRGM

RUN

SELECT PRGM

1234

SUN

MON

TUE

WED

THU

FRI

SAT

Yearly, 2 Circuits Yearly, 4 Circuits

Example: Extend ordinary weekly operation from 18:00 to 22:15 on

March 25 only.

Example: ON continuously from 18:00 on March 25, 2006, to 12:00

on April 9, 2006.

3/22(THU) 3/23(FRI) 3/24(SAT) 3/25(SUN) 3/26(MON)

18 18

Weekly

Program

22:15

Yearly

Program

Output

performance

of H5S

9189 9

18 22:1591899

2006/3/24 3/25 3/26 4/7 4/8 4/9

18 12

March 25, 2006 (Start date)

April 8, 2006 (End date)

18:00 (ON time)

12:00 (OFF time)

March 26, 2006 (Start date)

April 8, 2006 (End date)

8:00 (ON time)

22:00 (OFF time)

Program AProgram B

3/25/2006 3/26 4/7 4/8 4/9

18 12 18 12 18 12 18 12

Program A

822 822822

Program B

18 12

Output

performance

of H5S

H5S

Yearly Timer Operation Yearly Pulse-output Operation

Yearly, 2 Circuits Yearly, 4 Circuits

Example: ON at 18:00 and OFF at 22:15 on March 25 every year.

Shaded portion indicates

blinking of the indicator.

1. Set the Mode Switch to P1 or P2.

→For 4-circuit models, refer to

page 18.

2. Press for 1 s or more. (The

Time Switch enters yearly program

setting mode. *1)

3. Specify the start date using ,

and . *2

The year can be set from the current

year to the next two years as shown

in the example. If the year is set to

“--”, the operation performs every

year.

If the current year is 2006, the

displayed year changes as follows.

-- → 06 → 07 → 08 → -- → 06 →

4. Press .

Specify the end date using ,

and . *2

If the starting year has been set to

“--”, the ending year cannot be set.

5. Press .

Set the ON time with and . *2

6. Press .

Set the OFF time with and . *2

7. Press to enter the settings.

*1 If one or more programs have already been set, the display starts showing the

set programs.

To add another program, press repeatedly until “--:--“ is displayed.

*2 Holding down the date- or time-setting keys rapidly advances the value.

Pressing decrements the value of the key that was last pressed.

Note:

• Yearly programs are added to weekly programs.

• All the start/end dates and ON/OFF times must be set. the maximum

number of yearly timer operations that can be set is four for each output

circuit.

• If multiple settings are required, repeat steps 3 through 7.

• All of the yearly programs for the selected circuit (output) can be checked by

pressing in yearly program setting mode.

• The set data will be cleared if the Output Setting Switch is moved between

the TIMER and PULSE positions after the data has been set.

Set the program in the following order.

March 25, 2006 (Start date)

March 25, 2006 (End date)

18:00 (ON time)

22:15 (OFF time)

Day

period

Time

period

SUN

MON

TUE

WED

THU

FRI

SAT

RUN

PULSE

TIMER

YEAR

WRITE

Number of

remaining steps

WRITE

Yearly, 2 Circuits Yearly, 4 Circuits

Example: To produce output for 2 minutes at 18:00 from March 25 to

April 9.

Shaded portion indicates

blinking of the indicator.

1. Set the Mode Switch to P1 or P2.

→For 4-circuit models, refer to

page 18.

2. Press for 1 s or more. (The

Time Switch enters yearly program

setting mode. *1)

3. Specify the start date using ,

and . *2

The year can be set from the current

year to the next two years as shown in

the example. If the year is set to “--”,

the operation performs every year.

If the current year is 2006, the

displayed year changes as follows.

-- → 06 → 07 → 08 → -- → 06 →

4. Press .

Specify the end date using ,

and . *2

If the starting year has been set to

“--”, the ending year cannot be set.

5. Press .

Set the ON time with and . *2

6. Press .

Set the pulse width with .

The displayed pulse width changes

by pressing this key in the following

order.

1 s → 2 s → ··· 59 s → 1 m → ···

59 m → 60 m → 1 s

7. Press to enter the settings.

*1 If one or more programs have already been set, the display starts showing the

set programs.

To add another program, press repeatedly until “--:--“ is displayed.

*2 Holding down the date- or time-setting keys rapidly advances the value.

Pressing decrements the value of the key that was last pressed.

Note:

• Yearly programs are added to weekly programs.

• All the start/end dates, ON time, and pulse width must be set. The maximum

number of yearly pulse output operations that can be set is four for each

output circuit.

• If multiple settings are required, repeat steps 3 through 7.

• All of the yearly programs for the selected circuit (output) can be checked by

pressing in yearly program setting mode.

• The set data will be cleared if the Output Setting Switch is moved between

the TIMER and PULSE positions after the data has been set.

Set the program in the following order.

March 25, 2006 (Start date)

April 9, 2006 (End date)

18:00 (ON time)

2 minutes (Pulse width)

Day

period

Time

period

SUN

MON

TUE

WED

THU

FRI

SAT

RUN PULSE

TIMER

YEAR

WRITE

Number of

remaining steps

WRITE

PLS

WRITE

H5S

Convenient Functions

Setting Temporary Holidays (Weekly)

Temporary holidays (non-operating days) can be easily set.

Because the setting is automatically cleared after the set holiday has

passed, temporary holidays are easily set without changing other

settings, including those of the Output ON/OFF Switches.

Setting Temporary Holidays (Yearly)

Temporary* holidays (non-operating days) can be set simply by

specifying dates. The holidays will be OFF in both the weekly and

yearly programs. Because the setting is automatically cleared after

the set holiday has passed, temporary holidays are easily set without

changing other settings, including those of the Output ON/OFF

Switches.

* Annual holidays can also be set.

Weekly, 2 Circuits

Example: Friday and Saturday in the current week are set as

holidays (non-operating days).

The Time Switch then operates according to the ordinary

(previous) settings from the following week onward.

Shaded portion indicates

blinking of the indicator.

1. Press for 2 s or more in

RUN mode.

(The Time Switch enters holiday

setting mode.)

2. Turn OFF the bars ( ) at the

positions of the days to be set as

holidays.

Bar ON: Operating day

Bar OFF: Holiday

3. Press to enter the setting.

After “hday” is displayed for

approximately 1 s, the Time Switch

returns to RUN mode.

Note:

•Any day in the 7-day period starting from the current day can be

set as a holiday.

The setting is automatically cleared after the set holiday has

passed.

•All ON operations are cancelled on the holiday.

•The set holidays are valid for all the output circuits.

•You must be in RUN mode to enter to holiday setting mode.

•If the current day of the week is changed, the holiday settings will

be cleared.

•Press for 2 s in holiday setting mode to return to RUN

mode. If you do nothing for 30 s, the Time Switch will

automatically return to RUN mode.

HOLIDAY

SUN

MON

TUE

WED

THU

FRI

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

HOLIDAY

Yearly, 2 Circuits Yearly, 4 Circuits

Example: The days from April 29 to May 7 in 2006 are set as

holidays (non-operating days). The Time Switch then

operates according to the ordinary (previous) settings

from the following year onward.

Shaded portion indicates

blinking of the indicator.

1. Press for 2 s or more in

RUN mode. *1

(The Time Switch enters holiday

setting mode.)

2. Specify the start date of holidays

using , and . *2

The year is displayed in the following

order by pressing . (The year can

be set from the current year to the

next two years.)

<Example> If the current year is 2006,

the displayed year changes

as follows.

06→07→08→--→06→

If the year is set to --, the holiday

setting is executed every year.

3. Press .

In the same manner, specify the end

date of holidays using , and

. *2

If the starting year has been set to

“--“, the ending year cannot be set.

4. Press to enter the settings.

5. Press for 2 s or more to return to RUN mode.

*1 If one or more programs have already been set, the display starts showing

the set programs.

To add another program, press repeatedly until “--.--“ is

displayed.

*2 Holding down the date-setting keys rapidly advances the value.

Pressing decrements the value of the key that was last pressed.

Note:

•Any date between the current date and December 31 in the year

after the following year can be specified as a holiday.

•The setting is automatically cleared after the set holiday has

passed (unless the year is set to --).

•Repeat steps 2 to 4 to make other settings.

•Both the start and end dates of holidays must be set. The

maximum number of holidays that can be set is 16.

•You must be in RUN mode to enter to holiday setting mode.

•If the current date is changed, the holiday settings will be cleared.

•When you specify the year, be sure to set the end date so that it is

after the start date.

•Press for 2 s in holiday setting mode to return to RUN

mode. If you do nothing for 30 s, the Time Switch will

automatically return to RUN mode.

•All ON operations are cancelled on the holiday.

•The set holidays are valid for all the output circuits.

HOLIDAY

Y M D

WRITE

Y M

WRITE

HOLIDAY

WRITE

HOLIDAY

H5S

Program Check Function

The days and times when output is set to turn ON and OFF over the

course of one week can be displayed in the sequence in which the

Time Switch is to operate.

Checking the Settings

The program can be checked for one week from the current day.

Change to the setting mode to check the year program past one

week.

Day Override Operation

Operation for one day can be temporarily (for only one week)

executed on another day.

Manual Summer Time (DST)

Adjustment

Each time is pressed for 2 s or more in RUN mode, the current

time switches between the current time and the current time +1 hour.

Note: With Yearly models, the current time can also be automatically

switched to DST. For details, refer to functions F6 and F7 on

page 25.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press for 2 s or more in RUN

mode.

(“test” flashes and the day and time

of the next change in output state are

displayed.)

2. Press .

The display shows the time of the

next change in output state.

Each time is pressed, the

display shows the days and times for

one week.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press one of the Day Keys for 2 s or

more in RUN mode to check settings

for the day.

(“chec” flashes and the time of the

first ON time is displayed.)

2. Press .

The display shows the time of the

next change in output state.

TEST

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

Weekly, 2 Circuits

Example: The operation set for Sunday is executed this Saturday.

The Time Switch performs the ordinary operation

(according to the previous settings) from next Saturday

onward.

Shaded portion indicates

blinking of the indicator.

1. Press for 2 s or more in RUN

mode.

(The Time Switch enters day override

operation setting mode.)

2. Turn ON the bar ( ) at the position

of the day for which the set operation

is to be executed on another day.

(“copy” will flash.)

3. Press to select the day on

which the operation is to be

executed.

4. Turn ON the bar ( ) at the position

of the day. More than one day can be

selected.

5. Press to enter the setting.

Note:

•Any day in the 7-day period starting from the current day can be

set as a day on which another day's operation is to be executed.

The setting is automatically cleared after the day has passed.

•All ON operations are executed on another day.

•The day override operation settings are valid for all the output

circuits.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

COPY

SUN

MON

TUE

WED

THU

FRI

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

SUN

MON

TUE

WED

THU

FRI

SAT

SUN

MON

TUE

WED

THU

FRI

SAT

WRITE

+1h

SUN

MON

TUE

WED

THU

FRI

SAT SUN

MON

TUE

WED

THU

FRI

SAT

H5S

Switching between 12-hour and 24-

hour display

Each time is pressed for 2 s or more in RUN mode, the current

time switches between 12-hour (AM/PM) and 24-hour display.

Display Switching

Each time is pressed for 2 s or more in RUN mode, the displayed

content switches as shown below.

Note: Displays only when Input selection (see function F2 on

page 23) is set to totl.

Note: Displays only when Input selection (see function F2 on

page 23) is set to totl.

Override and Automatic Return

Operation

Helps to cope with sudden schedule changes without having to

revise the existing program. This function allows ON/OFF states that

were forcibly set using the Output ON/OFF Switch to be maintained

until the next ON/OFF time.

Turn output OFF while maintaining AUTO

operation

1. Change the setting of the Output ON/OFF Switch from AUTO to

OFF.

2. Return the Output ON/OFF Switch from OFF to AUTO

while pressing . (Output remains in the OFF

state.)

3. The regular operation will be performed from the next

ON time.

Turn output ON while maintaining AUTO

operation

1. Change the setting of the Output ON/OFF Switch from AUTO to

ON.

2. Return the Output ON/OFF Switch from ON to AUTO

with pressed. (Output remains in the ON

state.)

3. The regular operation will be performed from the next

OFF time.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Weekly, 2 Circuits

Yearly, 2 Circuits

Yearly, 4 Circuits

SUN

MON

TUE

WED

THU

FRI

SAT SUN

MON

TUE

WED

THU

FRI

SAT

Current time

Next operation

(Factory setting)

hour cnt

Total time Total count

(See note.) (See note.)

hour cnt

Current time

Current month and day

(Factory setting)

Total time Total count

(See note.) (See note.)

Current time

Next operation

Current time

Current month and day

(Factory setting)

Current time

Next operation

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

AUTO

OFF

WRITE

AUTO

OFF

WRITE

H5S

Using Advanced Functions

About Advanced Functions

Set the advanced functions as required to perform more advanced

operation. Outlines of the advanced functions are provided on the

following pages.

Refer to the Instruction Manual enclosed with the H5S for details.

Initial Setting Mode

Time Counter/Total Counter Display

(F2, F3, F4)

This function displays the total elapsed time and total input count for

an external input.

The alarm indicator can also be displayed if an alarm value has been

set.

Note: For display details, refer to Display Switching on page 22.

Input selection (F2)

•Set Input selection (F2) in initial setting mode to Time Counter/Total

Counter.

Alarm for time counter (F3)

Alarm for total counter (F4)

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

<2-circuit models>

RUN

<4-circuit models>

PRGM

RUN

Program setting mode

Initial setting mode

F1:Next operation display

F2:Input selection

*2-circuit models only

F3:Total time alarm

*Only when "totl"

is selected in F2.

F4:Total count alarm

F5:Date format

selection *Yearly models only

F6:Summer time

(DST) adjustment *Yearly models only

F7:Summer time

schedule selection *Yearly models only

Only when "auto"

is selected in F6.

F8:Season switching

*Yearly models only

F9:Period of season

*Yearly models only

Only when "on"

is selected in F8.

TIME ADJ

Press briefly

TIME ADJ

Press

for 3 s or more.

*Only when "totl"

is selected in F2.

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Press briefly

TIME ADJ

Yearly, 2 Circuits Yearly, 2 Circuits

1. Press for 3 s or more while

the total time or count is displayed.

2. Press to reset the total time

and total count

* The resetting is cancelled by pressing

again while “clr” is flashing.

Shaded portion indicates

blinking of the indicator.

1. Press or to change the

display to totl.

2. Press to enter the setting.

Shaded portion indicates

blinking of the indicator.

1. The display will automatically change

to the alarm setting screen 2 s after

switching to F3.

Press the or .

Key: Increments in units of 1,000 h*

Key: Increments in units of 10 h*

Note: The default setting

is 0.0 h (no alarm

display).

2. Press to enter the setting.

* Pressing decrements the value of the

key that was last pressed.

Shaded portion indicates

blinking of the indicator.

1. The display will automatically change

to the alarm setting screen 2 s after

switching to F4.

Press the or .

Key: Increments in units of 10,000*

Key: Increments in units of 100*

Note: The default setting

is 0 (no alarm

display).

2. Press to enter the setting.

* Pressing decrements the value of the

key that was last pressed.

Alarm

indicator

Time counter display

(Example shows display

when the total elapsed time

is 30,000 hours.)

Total counter display

(Example shows display

when the total input

count is 500,000.)

Thecolorindicatesflashing.

CLEAR

WRITE

CLEAR

WRITE

H5S

Time Adjustment Input Function (F2)

The time can be set to 00 min 00 s at the same time as external input

is applied. (The hours is rounded up for 30 minutes or higher and

rounded down for 29 minutes or lower.)

When using two or more Time Switches, their times can be

synchronized.

Input selection (F2)

•Set Input selection (F2) in initial setting mode to Time Adjustment

Input.

Manual Operation on Recovery from

Power Failure (F2)

After power is restored to the H5S, it is possible to set the Time

Switch to stop turning ON output until external input is applied.

Input selection (F2)

•Set Input selection (F2) in initial setting mode to Manual Operation

on Recovery from Power Failure.

Bank Switching (F2)

Two groups (banks) of programs can be registered with the Time

Switch. Banks can be switched by external input.

Input selection (F2)

•Set Input selection (F2) in initial setting mode to Bank Switching.

Switching banks in RUN mode

Banks are switched as shown in the following table depending on the

external input state.

Programming a bank

Press in program setting mode to switch banks.

Different programs can be set for each bank.

Season Switching/Period of Season

(F8/F9)

Weekly programs can be set to automatically switch throughout the

year in response to seasons.

* Up to four seasons can be set for 4-circuit models, and up to two

seasons for 2-circuit models.

Season switching (F8)

•Turn ON Season switching (F8) in initial setting mode.

Weekly, 2 Circuits Yearly, 2 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to change the

display to sync.

2. Press to enter the setting.

Weekly, 2 Circuits Yearly, 2 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to change the

display to boot.

2. Press to enter the setting.

WRITE

ON OFF

Flashing

indicator

(in the upper left corner of the screen)

Power

supply

External

input

Output

WRITE

Weekly, 2 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to change the

display to bank.

2. Press to enter the setting.

Open-circuited Short-circuited

Bank A B

Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to change the

display to on.

2. Press to enter the setting.

Note: The “C” and “D”

indications are not

displayed in 2-circuit

models.

Bank A

Switching

Weekly programs

13:00 ON

16:00 OFF

Bank B

Weekly programs

8:00 ON

10:00 OFF

WRITE

TIME ADJ

Mar. Apr. May Jun. Jul. Aug. Sept. Oct. Nov. Dec. Jan. Feb.

Spring Summer Autumn Winter

Seasons(*)

Setting

Spring

17:30 ON

21:00 OFF

Summer

19:00 ON

22:00 OFF

Autumn

18:00 ON

21:00 OFF

Winter

17:00 ON

21:00 OFF

WRITE

H5S

Period of Season (F9)

Switching seasons

One group of programs is automatically switched to another,

according to the seasons set in initial setting mode.*

* The season switching functions apply only to weekly programs, not

yearly programs.

Programming a season

Press in program setting mode to switch seasons.

Different weekly programs can be set for each season.

Next Operation Display (F1)

The order of the output channels for which the next operation (the

next ON or OFF time) is set can be selected for the sub-display.

This function is useful when an operation in a particular circuit is to

be monitored.

Parameters

- - - - - - - - - - Displays the next operation for circuit 1 only.

only 2 - - - - - - - - - -Displays the next operation for circuit 2 only.

only 3 - - - - - - - - - -Displays the next operation for circuit 3 only.

only 4 - - - - - - - - - -Displays the next operation for circuit 4 only.

all 1234 - - - - - - - - Displays the next operation for all circuits.

Note: 1. Circuits 3 and 4 are not displayed for 2-circuit models.

2. indicate the default.

Setting method

Date Format Selection (F5)

The displayed date format is selectable between “month. day” and

“day. month”.

Parameters

: “month. day”

dd.nn: “day. month”

Note: indicate the default.

Setting method

Summer Time (DST) Adjustment (F6)

Manual or automatic summer time adjustment can be selected.

Parameters

: Manual adjustment

auto: Automatic adjustment (Select summer time schedule in F7.)

Note: indicate the default.

Setting method

Shaded portion indicates

blinking of the indicator.

1. Press or to select the desired

season.

2. Press to enter the setting.

The display then changes to the start

period of season input screen. Press

or to designate the starting

date.

3. Press to enter the setting.

The display then changes to the end

period of season input screen. Press

or to designate the ending

date.

4. Press to enter the setting.

Note:

•The following is set as the default period of season.

A: 1.1 to 12.31 (1/1 to 12/31)

B to D: --.-- to --.-- (no setting)

*The “C” and “D” indications are not displayed in 2-circuit models.

•If overlapping periods are set, the priority becomes A<B<C<D.

For example, setting A (1/1 to 12/31) and B (4/1 to 9/30) will result in the

following: 1/1 to 3/31: A, 4/1 to 9/30: B, 10/1 to 12/31: A.

•All outputs are OFF in the weekly program for all dates that do not come in

any period.

Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Select one of the parameters using

or .

2. Press to enter the setting.

WRITE

M D

WRITE

M D

WRITE

TIME ADJ

only 1

The inverted characters

WRITE

Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to select one of the

parameters.

2. Press to enter the setting.

Yearly, 2 Circuits Yearly, 4 Circuits

Shaded portion indicates

blinking of the indicator.

1. Press or to select one of the

parameters.

2. Press to enter the setting.

mm.dd

The inverted characters

WRITE

off

The inverted characters

WRITE

H5S

Summer Time Schedule Selection (F7)

The time and date when the Time Switch automatically switches to

and from summer time can be selected with reference to the

following regions.

Parameters

Note: indicate the default.

Setting method

About the Self Diagnosis Function

The following indications will be displayed when an error is

generated.

Yearly, 2 Circuits Yearly, 4 Circuits

Regions Summer time start

date and time

Summer time end

date and time

(North

America)

At 2:00 on the second

Sunday in March

At 2:00 on the first

Sunday in November

eu (Europe) At 2:00 on the last

Sunday in March

At 3:00 on the last

Sunday in October

aust (Australia) At 2:00 on the last

Sunday in October

At 3:00 on the last

Sunday in March

Shaded portion indicates

blinking of the indicator.

1. Press or to select one of the

parameters.

2. Press to enter the setting.

The inverted characters

WRITE

Indication Description Output Remedy

e1 CPU error OFF Press

“RESET”

e2 Memory error OFF Press

“RESET”

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:



Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.



Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.



Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2012.2

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/