CHEMTRONICS(R) TDS # 1620 Technical Data Sheet Ultrajet(R) All-Way Duster PRODUCT DESCRIPTION Ultrajet(R) All-Way Duster is a new innovative all-way spray duster with the biggest blast to clean anything fast. This compressed gas duster can be sprayed right-side up and upside down emitting a high pressure blast that cleans electronics without scratching delicate surfaces. Filtered to 0.2 microns Biggest air blast of any non-CO2 duster Ultrajet(R) All-Way sprays any direction, even upside down Ozone safe, CFC and HCFC Free High pressure for contamination control Nonabrasive and residue free Excellent material compatibility Penetrates hard to reach areas TYPICAL APPLICATIONS Ultrajet(R) All-Way is engineered for all aspects of electronic equipment maintenance and is particularly suited for applications involving: Audio/Video Equipment Computers and Other Electronic Equipment Lab Instruments Photo Equipment Printed Circuit Boards Surface Mount Devices TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point -15.7F 3.18 Vapor Density (air=1) @ 77F 0.10% by weight Solubility in Water @ 77F F/1 atm 1.21 Specific Gravity (water = 1 @77F) Evaporation Rate (butyl acetate=1) Appearance Odor Surface Tension (dynes/cm @77F) Flash Point (TCC) Shelflife RoHS/WEEE Status >1 Clear, Colorless Liquified Gas Slight Ethereal 7.8 None 5 years COMPATIBILITY Ultrajet(R) All-Way is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. As with any duster/cleaner, compatibility must be determined on a noncritical area prior to use. TECHNICAL & APPLICATION ASSISTANCE Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Material Buna-N Graphite HDPE LDPE LexanTM Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber TeflonTM VitonTM Chemtronics(R) provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. VOC HFC ODP 0.0% 100.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is 0.0. It is the sum of the ODP of the substances that may contribute to the depletion of stratospheric ozone, based upon the weight of each substance in the product's formulation. PERFORMANCE Pressure PSIG / Temperature F 200 P S I G 0.0% 0.0% 0.0% 150 100 - NOTE: 50 0 20 40 60 80 Temperature F 100 120 140 USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Ultrajet(R) All-Way. Direct high pressure spray onto the area to be cleaned to remove dust, dirt and other contaminant. For optimum performance and pin point control, use with the attached extension tube. AVAILABILITY ES1620 8 oz. Aerosol This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. MANUFACTURED BY: ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 REV. F (06/06) DISTRIBUTED BY: