1N4001 thru 1N4007
Features
- Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
- Low reverse leakage
- High forward surge capability
- High temperature soldering guaranteed: 350°C/10
Seconds, 0.375" (9.5mm) lead length
- Guardring for overvoltage protection
Mechanical Data
- Case: JEDEC DO-41 molded plastic body
- Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
- Polarity: Color band denotes cathode end
- Mounting Position: Any
- Weight: 0.012 oz., 0.3 g
- Weight: 0.34 g
General Purpose Plastic RectifierGeneral Purpose Plastic Rectifier
www.comchiptech.com
COMCHIPCOMCHIP
MDS0312002A Page 1
Reverse Voltage: 50 to 1000V
Forward Current: 1.0A
DO-41
Dimensions in inches and (millimeters)
0.107 (2.7)
0.080 (2.0)
Dia.
0.034 (0.86)
0.028 (0.71)
Dia.
1.0 (25.4)
Min.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
Min.
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symb. 1N 1N 1N 1N 1N 1N 1N Unit
4001 4002 4003 4004 4005 4006 4007
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
* Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
* Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA = 75°C IF(AV) 1.0 A
* Peak forward surge current 8.3ms single half sine-wave IFSM 30 A
superimposed on rated load (JEDEC Method) TA = 75°C
* Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length TL = 75°C IR(AV) 30 µA
Typical thermal resistance(1) RθJA 50 °C/W
RθJL 25
* Maximum DC blocking voltage temperature TA+150 V
* Operating junction and storage temperature range TJ, TSTG – 50 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward voltage at 1.0A VF1.1 V
* Maximum DC reverse current TA = 25°C 5.0
at rated DC blocking voltage TA = 125°C IR50 µA
Typical junction capacitance at 4.0V, 1MHz CJ15 pF
Note: (1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted *JEDEC registered values
www.comchiptech.com
COMCHIPCOMCHIP
MDS0312002A Page 2
Schottky Barrier RectifierSchottky Barrier Rectifier
Ratings and Characteristic Curves (TA = 25°C unless otherwise noted)
00
Fig. 1 – Forwar d Current Derating Curve
Average Forward Rectified Current (A)
Ambient Temperature (°C)
0
Fig. 4 – Typical Reverse Characteristics
5.0
Fig. 2 – Maximum Non-Repetitive
Peak Forward Surge Current
Fig. 5 – Typical Junction Capacitance
Fig. 3 – Typical Instantaneous
Forward Characteristics
Fig. 6 – Typical Transient Thermal
Impedance
25 50 75 100 125 150 175
0.2
0.4
0.6
0.8
1.0 60HZ Resistive or
Inductive Load
0.375" (9.5mm)
Lead Length
0.2 x 0.2" (5.0 x 5.0mm)
Copper Pads
1 10 100
Number of Cycles at 60HZ
10
15
20
25
30
Peak Forward Surge Current (A)
TA = 75°C
8.3ms Single Half Sine-Wave
(JEDEC Method)
0.6 0.8 1.0 1.2 1.4 1.6 1.8
Instantaneous Forward Voltage (V)
0.01
0.1
1
10
20
Instantaneous Forward Current (A)
0.01
0.1
1
10
100
1,000
Instantaneous Reverse Current (µA)
60 80 10020 40
Percentage of Peak Reverse Voltage (%)
TJ = 25°C
TJ = 150°C
TJ = 100°C
0.1 1 10 100
Rev erse Voltage (V)
1
10
100
Junction Capacitance (pF)
TJ = 25°C
f = 1.0MHZ
Vsig = 50mVp-p
0.01 0.1 1 10 100
t -- Pulse Duration (sec)
0.1
10
100
1
Transient Thermal Impedance (°C/W)
TJ = 25°C
Pulse Width = 300µs
1% Duty Cycle
