ALUMINUM ELECTROLYTIC CAPACITORS URZ Compact & Low-Profile Sized, Wide Temperature Range Very small case sizes same as URS, but operating over wide temperature range of - 55 (- 40) to +105C. Compliant to the RoHS directive (2011/65/EU). (Through 100V only) URZ High Temperature URS Specifications Item Performance Characteristics Category Temperature Range -55 to +105C (6.3 to 100V) , -40 to +105C (160 to 400V) Rated Voltage Range 6.3 to 400V Rated Capacitance Range 1 to 10000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. 160 to 400 After 1 minute's application of rated voltage at 20C, I = 0.04CV+100 (A) or less For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 5 10 10 4 8 35 2 3 25 2 4 16 3 6 50 2 3 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 105C. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330F) 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 UR Z 1 A 3 3 1 MPD 12 Size code Capacitance tolerance (20%) P 0.5 D+0.5 MAX Configuration Rated capacitance (330F) Rated voltage (10V) Pressure relief vent (8up) Series name L+ 15MIN MAX Type 4MIN Configuration (mm) (D < 20) 1.5 (D 20) 2.0 Pb-free leadwire Pb-free PET sleeve D 5 6.3 8 10 12.5 16 18 20 D P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 5 * 6.3 DD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 8 * 10 12.5 to 18 20 PD HD RD * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 192 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS URZ Dimensions V 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 2.2 Code 2R2 3.3 3R3 4.7 4R7 Cap.(F) 25 5x 9 20 5x 9 25 5x 9 30 30 5x 9 35 5x 9 40 5x 9 46 40 5x 9 50 5x 9 55 5x 9 60 5x 9 65 5x 9 55 5x 9 60 5x 9 70 5x 9 75 6.3 x 9 85 5x 9 65 5x 9 70 5x 9 80 6.3 x 9 95 6.3 x 9 100 5x 9 95 6.3 x 9... 115 6.3 x 9... 130 8x 9 155 10 x 9 170 6.3 x 9 155 8 x 9.. 205 10 x 9.. 220 10 x 9 235 10 x 12.5 290 8x 9 210 10 x 9.. 240 10 x 9.. 270 10 x 12.5 340 12.5 x 12.5 370 8x 9 275 10 x 9.. 290 ...10 x 12.5 370 12.5 x 12.5 420 16 x 15 540 450 .12.5 x 12.5. 520 12.5 x 15... 590 16 x 15 720 18 x 20 830 690 16 x 15 830 18 x 15 970 18 x 20 1110 20 x 25 1250 16 x 15 940 18 x 15 1050 18 x 20 1220 20 x 25 1430 18 x 15 1120 18 x 20 1260 18 x 25 1470 18 x 25 1560 Case size D x L (mm) Rated ripple 100 22 220 5x 9 25 5x 9 33 330 5x 9 40 47 470 5x 9 55 100 101 5x 9 90 220 221 6.3 x 9 145 330 331 6.3 x 9 180 470 471 8x 9 235 1000 102 10 x 9 370 2200 222 12.5 x 15 635 3300 332 16 x 15 860 4700 472 16 x 15 1010 10 x 12.5 12.5 x 15 6800 682 18 x 15 1200 18 x 20 1330 10000 103 18 x 20 1450 18 x 25 1700 Cap.(F) Code 010 1 18 5x 9 10 V 5x 9 5x 9 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 5x 9 12 2.2 2R2 5x 9 17 3.3 3R3 5x 9 25 4.7 4R7 6.3 x 9 32 10 100 5 x 9.51 42 6.3 x 9 50 22 220 6.3 x 9.51 71 8x 9 93 33 330 8 x 9.51 100 10 x 9 130 47 470 8 x 9.51 120 10 x 12.5 165 68 680 100 101 150 151 220 16 x 15 .16 x 15 16 x 15 * 18 x 15 300 .16 x 15 250 300 * 18 x 15 * 18 x 15 200 250 . 18 x 20 300 18 x 25 300 20 x 25 350 Case size Rated ripple 350 .18 x 20 350 .18 x 25 420 12.5 x 15 265 18 x 20 420 18 x 25 420 18 x 25 510 .18 x 25 510 221 12.5 x 12.5 335 16 x 15 440 .20 x 25 550 330 331 12.5 x 15.5 510 18 x 15 540 470 471 16 x 15.5 640 200 18 x 20 18 x 20 215 100 250 350 10 x 9.51 * 18 x 15 D x L (mm) Rated ripple current (mArms) at 105C 120Hz * Size 16 x 20 is available for capacitors marked " " Size 20 x 15 is available for capacitors marked " " Size 20 x 20 is available for capacitors marked " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(F) Frequency 1 to 47 100 to 470 1000 to 10000 010 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 193 10kHz or more 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. CAT.8100H