DG800 Series Function/Arbitrary Waveform Generator Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps 2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per channel for arbitrary waveforms Optional dual-channel with the same performance, equivalent to two independent signal sources High frequency stability: 1 ppm; low phase noise: -105 dBc/Hz Built-in high-order harmonic generator (at most 8-order harmonics) Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields Sample rate up to 125 MSa/s, vertical resolution 16 bits Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM. Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations USB Host&Device interface (standard); USB-GPIB function supported 4.3'' TFT color touch screen RS232, PRBS, and Dual-tone outputs supported RIGOL 1 Design Features Unique SiFi II Technology Generate the arbitrary waveforms points by points without distorting the signals. In comparison with the last generation of the SiFi technology, SiFi II has added multiple filters, supporting the dynamic adjustment of the edge time. Touch-enabled UI Design Provide brand new UI operation experience, supporting the tap and drag operation gestures. You can also use the onscreen keypad to complete the parameter settings. Advanced Function Output Support PRBS and RS232 pattern output and local Sequence editing. RIGOL 2 100MHz Bandwidth White Gaussian Noise The brand new heat dissipation structure design has undergone the strict thermal simulation test to ensure the steady operation of the instrument in a complex environment. DG800 Series Function/Arbitrary Waveform Generator Dimensions: WxHxD = 237.4 mm x 97 mm x 268 mm Weight: 1.75 kg (Package Excluded) RIGOL 3 Function Interface Dual-channel with the same performance (Required to install the DG800-DCH option for the single-channel model) Arbitrary waveform function with the unique SiFi II technology Burst function Various analog and digital modulation functions RIGOL 4 160 built-in arbitrary waveforms Sweep function Standard harmonic generator function Dual-tone function PRBS function RS232 function Sequence function RIGOL 5 Waveform combine function Channel and system setting File management function RIGOL 6 Standard 7 digits/s, 240 MHz bandwidth frequency counter Specifications Unless otherwise specified, all the specifications can be guaranteed when the following two conditions are met. * The signal generator is within the calibration period. * The signal generator has been running ceaselessly for over 30 minutes under the specified operating temperature (235). All the specifications are guaranteed except the parameters marked with "Typical". DG800 series specifications Model Channel Max. Frequency Sample Rate Waveform Basic Waveforms Advanced Waveforms Built-in Arbitrary Waveforms Frequency Characteristics Sine Square Ramp Pulse Harmonic PRBS Dual-tone RS232 Sequence Noise (-3 dB) Arbitrary Waveform Resolution Accuracy Sine Wave Spectrum Purity Harmonic Distortion Total Harmonic Distortion[1] Spurious (non-harmonic) Phase Noise Signal Characteristics Square Rise/Fall Time Overshoot Duty Non-symmetry Jitter (rms) Ramp Linearity Symmetry Pulse DG812 2 10 MHz 125 MSa/s DG811 1 DG822 2 25 MHz DG821 1 DG832 2 35 MHz DG831 1 Sine, Square, Ramp, Pulse, Noise, DC, Dual-tone PRBS, RS232, Sequence 160 types of waveforms, including Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, HaverSine, Lorentz, etc. 1 Hz to 10 MHz 1 Hz to 25 MHz 1 Hz to 5 MHz 1 Hz to 10 MHz 1 Hz to 200 kHz 1 Hz to 500 kHz 1 Hz to 5 MHz 1 Hz to 10 MHz 1 Hz to 5 MHz 1 Hz to 10 MHz 2 kbps to 10 Mbps 2 kbps to 20 Mbps 1 Hz to 10 MHz 1 Hz to 20 MHz baud rate range: 9600, 14400, 19200, 38400, 57600, 115200, 128000, 230400 2 k to 30 MSa/s 100 MHz bandwidth 1 Hz to 5 MHz 1 Hz to 10 MHz 1 Hz (1 ppm of the setting value + 10 pHz), 18 to 28 1 Hz to 35 MHz 1 Hz to 10 MHz 1 Hz to 1 MHz 1 Hz to 10 MHz 1 Hz to 15 MHz 2 kbps to 30 Mbps 1 Hz to 20 MHz 1 Hz to 10 MHz Typical (0 dBm)[1] DC to 10 MHz (included): <-55 dBc 10 MHz to 20 MHz (included): <-50 dBc 20 MHz to 35 MHz (included): <-40 dBc <0.075% (10 Hz to 20 kHz) Typical[1] 10 MHz: <-60 dBc >10 MHz: <-60 dBc + 6 dB/octave Typical (0 dBm, 10 kHz offset) 10 MHz: <-105 dBc/Hz Typical (1 Vpp, 1 kHz) 9 ns Typical (100 kHz, 1 Vpp) 5% 0.01% to 99.99% (limited by the current frequency setting) 1% of the period + 4 ns Typical (1 Vpp) 5 MHz: 2 ppm of the period + 200 ps >5 MHz: 200 ps 1% of peak output (typical, 1 kHz, 1 VPP, 100% symmetry) 0% to 100% RIGOL 7 Pulse Duty Rising/Falling Edge Overshoot Jitter (rms) Arbitrary Waveform Sequence Waveform Length Vertical Resolution Sample Rate Min Rise/Fall Time Jitter (rms) Overshoot Harmonic Output Harmonic Order Harmonic Type Harmonic Amplitude Harmonic Phase 16 ns to 1000 ks (limited by the current frequency setting) 0.001% to 99.999% (limited by the current frequency setting) 8 ns (limited by the current frequency setting and pulse width setting) Typical (1 Vpp, 1 kHz) 5% Typical (1 Vpp) 5 MHz: 2 ppm of the period + 200 ps >5 MHz: 200 ps 2 Mpts (optional 8 Mpts) 16 bits Interpolation filter: 10 Sa/s to 30 MSa/s Step filter: 2k Sa/s to 30 MSa/s Smooth filter: 2k Sa/s to 30 MSa/s Interpolation filter: 8 ns Step filter: 3.0/sample rate Smooth filter: 1.0/sample rate Typical (1 Vpp) Interpolation filter: 200 ps Step filter: <5 ps Smooth filter: <5 ps Typical (1 Vpp) 5% 8 Even Harmonic, Odd Harmonic, Order Harmonic, User The amplitude of each order of the harmonic can be set. The phase of each order of harmonic can be set. Output Characteristics Amplitude (into 50 ) Range Accuracy Flatness Unit Resolution Offset (into 50 ) Range(Peak ac+dc) Accuracy Waveform Output Output Impedance Protection Modulation Characteristics Modulation Type AM Carrier Waveform Source Modulating Waveform Modulation Depth Modulation Frequency FM Carrier Waveform Source RIGOL 8 10 MHz: 1.0 mVpp to 10 Vpp 30 MHz: 1.0 mVpp to 5.0 Vpp 35 MHz: 1.0 mVpp to 2.5 Vpp Typical (1 kHz sine, 0 V offset, >10 mVpp, auto) (1% of the setting value) 5 mV Typical (Sine, 1 Vpp) 5 MHz: 0.1 dB 15 MHz: 0.2 dB 25 MHz: 0.3 dB 35 MHz: 0.5 dB Vpp, Vrms, dBm 0.1 mVpp or 4 digits 5 Vpk ac+dc (1% of the setting value + 5 mV + 1% of the amplitude) 50 (typical) Short-circuit protection, automatically disable the waveform output when overload occurs AM, FM, PM, ASK, FSK, PSK, PWM Sine, Square, Ramp, Arb Internal/External Sine, Square, Ramp, Noise, Arb 0% to 120% 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Modulating Waveform Modulation Frequency PM Carrier Waveform Source Modulating Waveform Phase Deviation Modulation Frequency ASK Carrier Waveform Source Modulating Waveform Key Frequency FSK Carrier Waveform Source Modulating Waveform Key Frequency PSK Carrier Waveform Source Modulating Waveform Key Frequency PWM Carrier Waveform Source Modulating Waveform Width Deviation Modulation Frequency External Modulation Input Sine, Square, Ramp, Noise, Arb 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Sine, Square, Ramp, Noise, Arb 0 to 360 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Square with 50% duty cycle 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Square with 50% duty cycle 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Square with 50% duty cycle 2 mHz to 1 MHz Pulse Internal/External Sine, Square, Ramp, Noise, Arb 0% to 100% of the pulse width 2 mHz to 1 MHz Input Bandwidth Input Impedance AM, PM, FM: 75 mVRMS to 5 (Vac+dc) ASK, PSK, FSK: standard 5 V TTL 50 kHz 10 k Burst Characteristics Carrier Waveform Carrier Frequency Burst Count Internal Period Gated Source Source Trigger Delay Sine, Square, Ramp, Pulse, Noise, Arb, PRBS, RS232, Sequence (except DC, dual-tone, and Harmonic) 2 mHz to 10 MHz 2 mHz to 25 MHz 2 mHz to 35 MHz 1 to 1,000,000 or Infinite 1 s to 500 s External Trigger Internal, External, Manual 0 ns to 100 s Sweep Characteristics Carrier Waveform Type Orientation Start/Stop Frequency Sweep Time Hold/Return Time Source Marker Sine, Square, Ramp, Arb Linear, Log, and Step Up/Down Same as the upper/lower limit of the corresponding carrier frequency 1 ms to 500 s 0 ms to 500 s Internal, External, Manual Falling edge of the sync signal (programmable) Input Range Frequency Counter Measurement Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle Frequency Resolution 7 digits/s (Gate Time = 1 s) Frequency Range 1 Hz to 240 MHz Period Measurement Measurement Range 4 ns to 1,000 ks Voltage Range and Sensitivity (non-modulating signal) RIGOL 9 DC Offset Range 1 Hz to 100 MHz 100 MHz to 240 MHz 1 Hz to 100 MHz AC Coupling 100 MHz to 240 MHz Pulse Width and Duty Cycle Measurement Frequency and Amplitude 1 Hz to 25 MHz Ranges Min. Pulse Width Pulse Width Pulse Width Resolution Duty Measurement Range (display) Input Characteristics 1.5 Vdc 50 mVRMS to 2.5 (Vac+dc) 100 mVRMS to 2.5 (Vac+dc) 50 mVRMS to 2.5 Vpp 100 mVRMS to 2.5 Vpp Input Signal Range Disruptive Discharge Voltage 7 (Vac+dc) Coupling Mode Trigger Level Range Trigger Sensitivity Range AC On: Input Bandwidth = 150 kHz; Off: Input Bandwidth = 240 MHz -2.5 V to +2.5 V High, Low 1 ms 1.048 ms 10 ms 8.389 ms 100 ms 134.218 ms 1s 1.074 s 10 s 8.590 s >10 s >8.590 s DC Coupling Input Adjustment Input Trigger GateTime Trigger Characteristics Trig Input Level Slope Pulse Width Latency Trigger Output Level Pulse Width Max. Frequency High Frequency Rejection TTL-compatible Rising or falling (selectable) >100 ns Sweep: <100 ns (typical) Burst: <350 ns (typical) TTL-compatible >60 ns (typical) 1 MHz Two-channel Characteristics - Phase Offset Range 0 to 360 Waveform Phase Resolution 0.03 Reference Clock External Reference Input Lock Range Level Lock Time Input Impedance(Typical) Internal Reference Output Frequency Level Output Impedance(Typical) Synchronous Output Level Impedance RIGOL 10 10 MHz 50 Hz 250 mVpp to 5 Vpp <2 s 1 k, AC coupling 10 MHz 50 Hz 3.3 Vpp 50 , AC coupling TTL-compatible 50 , nominal value 50 mVRMS to 2.5 (Vac+dc) 20 ns 5 ns 0% to 100% DC Coupling Input Impedance = 1 M DC Overvoltage Protection Occurred when: The instrument amplitude setting is greater than 3.2 Vpp or the output AC+DC is greater than |1.6VDC| and the input voltage is greater than 12 x (1 5%)V (<10 kHz).Disruptive discharge voltage: 5(Vac + dc). The instrument amplitude setting is smaller than or equal to 3.2 Vpp or the output AC+DC is smaller than |1.6VDC| and the input voltage is greater than 2.6 x (1 5%)V (<10 kHz).Disruptive discharge voltage: 18(Vac + dc). Overcurrent Protection Occurred when: the current is greater than 240 mA. Programming Time Configuration Changes Function Change Amplitude Change Frequency Change USB 10 ms 5 ms 5 ms General Specifications Power Supply Power Voltage Power Consumption Display Type Resolution Color Environment Temperature Range Cooling Method Humidity Range Altitude Mechanical Characteristics Dimensions (WxHxD) Weight Interface IP Protection Calibration Interval Certification Information 100 V to 127 V (45 Hz to 440 Hz) 100 V to 240 V (45 Hz to 65Hz) Lower than 30 W 4.3-inch TFT LCD touch screen 480 horizontal x RGB x 272 vertical resolution 16 M Operating: 0 to 45 Non-operating: -40 to 60 Natural air cooling Below 30: 95%RH 30 to 40: 75%RH 40 to 50: 45%RH Operating: below 3,000 meters Non-operating: below 15,000 meters 237.4 mm x 97 mm x 268 mm Package excluded: 1.75 kg Package included: 2.85 kg USB Host, USB Device, and USB-GPIB IP2X 1 year (recommended) Compliant with EN61326-1:2006 IEC 61000-3-2:2000 IEC 61000-4-3:2002 IEC 61000-4-4:2004 EMC Electrical Safety IEC 61000-4-5:2001 4.0 kV (Contact Discharge) 4.0 kV (Air Discharge) 3 V/m (80 MHz to 1 GHz); 3 V/m (1.4 GHz to 2 GHz); 1 V/m (2.0 GHz to 2.7 GHz) 1kV power line 0.5 kV (phase-to-neutral voltage); 0.5 kV (phase-to-earth voltage); 1 kV (neutral-to-earth voltage) IEC 61000-4-6:2003 3 V, 0.15 MHz to 80 MHz IEC 61000-4-11:2004 Voltage dip: 0% UT during half cycle 0% UT during 1 cycle 70% UT during 25 cycles Short interruption: 0% UT during 1 cycle complies with USA: UL 61010-1:2012, Canada: CAN/CSA-C22.2 No. 61010-1-2012 EN 61010-1:2010, Note[1]: 0 dBm output, DC offset 0, impedance 50 . RIGOL 11 Options and Accessories Description DG812 (10 MHz, Dual-channel) DG822 (25 MHz, Dual-channel) DG832 (35 MHz, Dual-channel) Model DG811 (10 MHz, Single-channel) DG821 (20 MHz, Single-channel) DG831 (30 MHz, Single-channel) 1 Power Cord conforming to the standard of the destination country 1 BNC Cable (only provided by DG832/DG831/DG822/DG821) Standard Accessories 1 Quick Guide 1 Product Warranty Card Option Optional Accessories Order No DG812 DG822 DG832 DG811 DG821 DG831 CB-BNC-BNC-MM-100 - Single-dual CH Upgrade Option (only for DG831/DG821/DG811) DG800-DCH Memory Depth Upgrade Option DG800-ARB8M 40 dB Attenuator RA5040K USB-GPIB Interface Converter USB-GPIB-L HEADQUARTER EUROPE NORTH AMERICA JAPAN RIGOL TECHNOLOGIES, INC. No.8 Keling Road, New District,Suzhou, JiangSu,P.R.China Tel:+86-400620002 Email:info@rigol.com RIGOL TECHNOLOGIES EU GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: 0049-89/89418950 Email: info-europe@rigol.com RIGOL TECHNOLOGIES, USA INC. 8140 SW Nimbus Ave. Beaverton, OR 97008 Tel: 877-4-RIGOL-1 Fax: 877-4-RIGOL-1 Email: info@rigol.com RIGOL TECHNOLOGIES JAPAN, LLC MJ Bldg. 3F, 1-7-4 Minato, Chuou-ku, Tokyo, Japan 104-0043 Tel: +81-3-6262-8932 Fax: +81-3-6262-8933 Email: info-japan@rigol.com RIGOL(R) is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.com DSB11100-2018-08