Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns FEATURES * Gage patterns designed for measuring strain in a single direction * Single-grid and parallel dual-grid patterns * Gage lengths from 0.008 in (0.20 mm) to 0.500 in (12.7 mm) size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 008CL GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Micro-grid gage for strain measurement in high-gradient areas. 6X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.008 0.080 0.010 0.068 0.20 2.03 0.25 1.73 0.20L x 0.13W MATRIX SIZE 5.1L x 3.3W 120 1.0% SA-XX-008CL-120 015CK Micro-miniature pattern with enlarged solder tabs. See also 015UW pattern. 6X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.015 0.065 0.020 0.064 0.38 1.65 0.51 1.63 EA-XX-015CK-120 WA-XX-015CK-120 EP-08-015CK-120 SA-XX-015CK-120 120 120 120 120 MATRIX SIZE 0.19L x 0.15W 4.8L x 3.8W *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 12 micro-measurements@vishay.com 0.3% 0.5% 0.3% 0.5% W, E, L, LE W* Document No: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 015DJ Micro-miniature pattern with tab at each end of grid. See also 015EH pattern. 1X GAGE LENGTH 4X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.015 0.100 0.020 0.020 0.38 2.54 0.51 0.51 0.23L x 0.12W MATRIX SIZE 5.8L x 3.0W EA-XX-015DJ-120 EP-08-015DJ-120 SA-XX-015DJ-120 SK-XX-015DJ-120 120 120 120 120 0.3% 0.3% 0.6% 0.6% L, LE 015DV Micro-miniature pattern with higher power dissipation than 015EH pattern. 1X GAGE LENGTH 6X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.015 0.080 0.050 0.050 0.38 2.03 1.27 1.27 0.17L x 0.14W MATRIX SIZE 4.3L x 3.6W 015EH L, LE 4X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.015 0.025 0.020 0.100 0.38 0.64 0.51 2.54 MATRIX SIZE 120 0.3% 120 0.3% 120 0.6% Similar to 015DJ pattern but with tab at each side of grid. 1X GAGE LENGTH EA-XX-015DV-120 EP-08-015DV-120 SA-XX-015DV-120 0.15L x 0.19W Document Number: 11508 Revision 26-Aug-03 3.8L x 4.8W EA-XX-015EH-120 EP-08-015EH-120 SA-XX-015EH-120 SK-XX-015EH-120 micro-measurements@vishay.com 120 120 120 120 0.3% 0.3% 0.6% 0.6% L, LE www.vishaymg.com 13 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 015LA OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.070 0.020 0.020 0.38 1.78 0.51 0.51 MATRIX SIZE 0.18L x 0.10W 4.6L x 2.5W 015SE EA-XX-015LA-120 EP-08-015LA-120 120 0.3% 120 0.3% Micro-miniature pattern with tabs on one side for use near abutments. 1X 6X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.015 0.064 0.020 0.065 0.38 1.63 0.51 1.65 0.16L x 0.14W MATRIX SIZE 4.1L x 3.6W 015UW OVERALL LENGTH GRID WIDTH 0.140 0.020 0.105 0.38 3.56 0.51 2.67 0.24L x 0.18W W, E, L, LE CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. OVERALL WIDTH 0.015 www.vishaymg.com 14 120 0.3% 120 0.3% 120 0.6% 4X 1X MATRIX SIZE EA-XX-015SE-120 EP-08-015SE-120 SA-XX-015SE-120 Micro-miniature pattern. Exposed solder tab area is 0.06 x 0.04 in (1.5 x 1.0 mm). See also 015CK pattern. `C' FEATURE GAGE LENGTH OPTIONS AVAILABLE 4X 0.015 GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. Primarily used in small radii where gage tabs must be at one end. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 6.1L x 4.6W CEA-XX-015UW-120 micro-measurements@vishay.com 120 0.3% Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 030LB Miniature gage pattern for small radii where gage tabs must be at one end. 1X GAGE LENGTH 6X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.030 0.094 0.030 0.030 0.76 2.39 0.76 0.76 MATRIX SIZE 0.24L x 0.15W 6.1L x 3.8W 031CE GAGE LENGTH SE 6X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.031 0.076 0.062 0.062 0.79 1.93 1.57 1.57 MATRIX SIZE 0.23L x 0.16W 5.8L x 4.1W 031CF EA-XX-031CE-350 WA-XX-031CE-350 EP-08-031CE-350 SA-XX-031CE-350 350 350 350 350 0.2% 0.4% 0.2% 0.4% W, E, L, LE, P General-purpose miniature gage. Similar to 031CE pattern except for resistance. See also 032UW pattern. 6X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.031 0.076 0.062 0.062 0.79 1.93 1.57 1.57 MATRIX SIZE 120 0.2% 120 0.2% 120 0.4% General-purpose high-resistance miniature gage. See also 031CF and 032UW patterns. 1X GAGE LENGTH EA-XX-030LB-120 EP-08-030LB-120 SA-XX-030LB-120 0.19L x 0.14W 4.8L x 3.5W EA-XX-031CF-120 ED-DY-031CF-350 WA-XX-031CF-120 WK-XX-031CF-350 EP-08-031CF-120 SA-XX-031CF-120 SK-XX-031CF-120 SK-XX-031CF-350 SD-DY-031CF-350 120 350 120 350 120 120 120 350 350 0.2% 0.4% 0.4% 0.4% 0.2% 0.4% 0.4% 0.4% 0.8% W, E, L, LE, P E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 15 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 031DE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE General-purpose miniature gage. See also 031EC pattern. 4X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.031 0.140 0.032 0.032 0.79 3.56 0.81 0.81 MATRIX SIZE 0.27L x 0.12W 6.9L x 3.0W 031EC 120 350 350 120 350 350 120 120 350 120 350 350 EA-XX-031DE-120 EA-XX-031DE-350 ED-DY-031DE-350 WA-XX-031DE-120 WA-XX-031DE-350 WK-XX-031DE-350 EP-08-031DE-120 SA-XX-031DE-120 SA-XX-031DE-350 SK-XX-031DE-120 SK-XX-031DE-350 SD-DY-031DE-350 0.2% 0.2% 0.4% 0.4% 0.4% 0.4% 0.2% 0.4% 0.4% 0.4% 0.4% 0.8% E, SE, L, LE E, SE, L, LE E, L*, LE* General-purpose miniature gage. Similar to 031DE pattern but with tab at each side of grid. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 4X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.031 0.042 0.032 0.140 0.79 1.07 0.81 3.56 MATRIX SIZE 0.17L x 0.23W 4.3L x 5.8W EA-XX-031EC-120 EA-XX-031EC-350 ED-DY-031EC-350 WA-XX-031EC-120 WA-XX-031EC-350 WK-XX-031EC-350 EP-08-031EC-120 SA-XX-031EC-120 SA-XX-031EC-350 SK-XX-031EC-120 SK-XX-031EC-350 SD-DY-031EC-350 120 350 350 120 350 350 120 120 350 120 350 350 0.2% 0.2% 0.4% 0.4% 0.4% 0.4% 0.2% 0.4% 0.4% 0.4% 0.4% 0.8% E, SE, L, LE E, SE, L, LE E, L*, LE* 032SG Miniature gage with side-tab geometry. 1X GAGE LENGTH 6X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.032 0.064 0.032 0.072 0.81 1.63 0.81 1.83 MATRIX SIZE 0.16L x 0.19W 4.1L x 4.8W EA-XX-032SG-120 WA-XX-032SG-120 WK-XX-032SG-120 EP-08-032SG-120 SA-XX-032SG-120 SK-XX-032SG-120 120 120 120 120 120 120 0.2% 0.4% 0.4% 0.2% 0.4% 0.4% W, E, L, LE, P *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 16 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix 032UW inch millimeter `C' FEATURE OVERALL LENGTH GRID WIDTH OPTIONS AVAILABLE General-purpose miniature gage. Exposed solder tab area is 0.07 x 0.04 in (1.8 x 1.0 mm). 0.180 0.060 0.120 0.81 4.57 1.52 3.05 0.27L x 0.19W CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. OVERALL WIDTH 0.032 MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. 2X 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 6.9L x 4.8W 045AL Available with Option P2 (preattached leadwire cables) CEA-XX-032UW-120 120 0.3% Miniature high-resistance gage. 1X GAGE LENGTH 4X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.045 0.090 0.045 0.045 1.14 2.29 1.14 1.14 0.22L x 0.14W MATRIX SIZE 5.6L x 3.6W EA-XX-045AL-350 SA-XX-045AL-350 350 0.15% 350 0.3% E 050AH General-purpose miniature gage. 4X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.050 0.100 0.040 0.040 1.27 2.54 1.02 1.02 MATRIX SIZE 0.23L x 0.14W 5.8L x 3.6W EA-XX-050AH-120 ED-DY-050AH-350 EP-08-050AH-120 SA-XX-050AH-120 SK-XX-050AH-350 SD-DY-050AH-350 120 350 120 120 350 350 0.15% 0.4% 0.15% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 17 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 050AR GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE General-purpose miniature gage with large solder tabs. 4X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.050 0.100 0.050 0.078 1.27 2.54 1.27 1.98 MATRIX SIZE 0.25L x 0.18W 6.4L x 4.6W 050SB EA-XX-050AR-120 ED-DY-050AR-350 WA-XX-050AR-120 WK-XX-050AR-350 SA-XX-050AR-120 SK-XX-050AR-350 SD-DY-050AR-350 WD-DY-050AR-350 120 350 120 350 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* Similar to the 050AH pattern but with solder tabs at side of grid. 4X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.050 0.070 0.040 0.080 1.27 1.78 1.02 2.03 MATRIX SIZE 0.19L x 0.19W 4.8L x 4.8W EA-XX-050SB-120 ED-DY-050SB-350 WA-XX-050SB-120 WK-XX-050SB-350 EP-08-050SB-120 SA-XX-050SB-120 SK-XX-050SB-350 SD-DY-050SB-350 WD-DY-050SB-350 120 350 120 350 120 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* 0.15% 0.4% 0.3% 0.3% 0.8% E, P E 060BN General-purpose miniature gage. 1X GAGE LENGTH 4X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.104 0.054 0.054 1.52 2.64 1.37 1.37 MATRIX SIZE 0.18L x 0.13W 4.6L x 3.3W EA-XX-060BN-120 ED-DY-060BN-350 SA-XX-060BN-120 SK-XX-060BN-350 SD-DY-060BN-350 120 350 120 350 350 *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 18 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 060CC Small high-resistance gage with high power-handling capability. See also 060CP pattern. 1X GAGE LENGTH 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.200 0.180 0.180 1.52 5.08 4.57 4.57 MATRIX SIZE 0.33L x 0.27W 8.3L x 6.9W EA-XX-060CC-350 ED-DY-060CC-10C WA-XX-060CC-350 WK-XX-060CC-10C EP-08-060CC-350 SA-XX-060CC-350 SK-XX-060CC-10C SD-DY-060CC-10C WD-DY-060CC-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* 060CD Small high-resistance gage. See also 060CN pattern. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.150 0.100 0.100 1.52 3.81 2.54 2.54 MATRIX SIZE 0.28L x 0.20W 7.1L x 5.1W EA-XX-060CD-350 ED-DY-060CD-10C WA-XX-060CD-350 WK-XX-060CD-10C SA-XX-060CD-350 SK-XX-060CD-10C SD-DY-060CD-10C WD-DY-060CD-10C 350 1000 350 1000 350 1000 1000 1000 0.15% 0.4% 0.3% 0.3% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* 060CN Similar to 060CD pattern except for grid resistance. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.150 0.100 0.100 1.52 3.81 2.54 2.54 MATRIX SIZE 0.26L x 0.18W 6.6L x 4.6W EA-XX-060CN-120 ED-DY-060CN-350 WA-XX-060CN-120 WK-XX-060CN-350 EP-08-060CN-120 SA-XX-060CN-120 SD-DY-060CN-350 WD-DY-060CN-350 120 350 120 350 120 120 350 350 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 19 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 060CP RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Similar to the 060CC pattern except for grid resistance. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.200 0.180 0.180 1.52 5.08 4.57 4.57 0.31L x 0.26W MATRIX SIZE 7.9L x 6.6W 060EK EA-XX-060CP-120 ED-DY-060CP-350 WA-XX-060CP-120 WK-XX-060CP-350 EP-08-060CP-120 SA-XX-060CP-120 SK-XX-060CP-350 SD-DY-060CP-350 WD-DY-060CP-350 120 350 120 350 120 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* Small high-resistance gage with large grid area and side-tab geometry. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 0.080 0.150 0.230 1.52 2.03 3.81 5.84 MATRIX SIZE 0.15L x 0.30W 3.8L x 7.6W 060PB EA-XX-060EK-350 ED-DY-060EK-10C SA-XX-060EK-350 SK-XX-060EK-10C SD-DY-060EK-10C 350 1000 350 1000 1000 0.15% 0.4% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* Dual pattern for back-to-back bending sections. Longitudinal grid centerlines spaced 0.085 in (2.16 mm) apart. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.060 ES 0.120 CP 0.065 ES 0.150 CP 1.52 ES 3.05 CP 1.65 ES 3.81 CP MATRIX SIZE 0.18L x 0.20W 4.6L x 5.1W EA-XX-060PB-120 EA-XX-060PB-350 WA-XX-060PB-120 WA-XX-060PB-350 WK-XX-060PB-350 WK-XX-060PB-500 SA-XX-060PB-120 SA-XX-060PB-350 SK-XX-060PB-350 SK-XX-060PB-500 120 350 120 350 350 500 120 350 350 500 0.2% 0.2% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% W, E, L, LE W, E, L, LE W* W* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 20 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 062AA GAGE LENGTH OPTIONS AVAILABLE 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.150 0.062 0.100 1.57 3.81 1.57 2.54 MATRIX SIZE 0.35L x 0.21W 8.9L x 5.3W 062AK EA-XX-062AA-120 120 0.15% E, P General-purpose gage with elongated solder tabs. See the 062AP pattern for WA, WK, and other series with this grid size. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.160 0.062 0.062 1.57 4.06 1.57 1.57 0.27L x 0.14W MATRIX SIZE 6.9L x 3.6W EA-XX-062AK-120 ED-DY-062AK-350 EP-08-062AK-120 120 0.15% 350 0.4% 120 0.15% E, P E Widely used general-purpose gage. See also 062AQ and 062UW patterns. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 062AP 1X 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.114 0.062 0.062 1.57 2.90 1.57 1.57 MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage with large solder tabs. See the 062AP pattern for WA, WK, and other series with this grid size. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.26L x 0.16W 6.6L x 4.1W EA-XX-062AP-120 ED-DY-062AP-350 EK-XX-062AP-350 WA-XX-062AP-120 WK-XX-062AP-350 EP-08-062AP-120 SA-XX-062AP-120 SK-XX-062AP-350 SD-DY-062AP-350 WD-DY-062AP-350 120 350 350 120 350 120 120 350 350 350 0.15% 0.4% 0.15% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W, SE W* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 21 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 062AQ GAGE LENGTH OPTIONS AVAILABLE 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.114 0.062 0.062 1.57 2.90 1.57 1.57 MATRIX SIZE 0.26L x 0.15W 6.6L x 3.8W 062AU EA-XX-062AQ-350 ED-DY-062AQ-500 WA-XX-062AQ-350 WK-XX-062AQ-500 EP-08-062AQ-350 SA-XX-062AQ-350 SK-XX-062AQ-500 SD-DY-062AQ-500 WD-DY-062AQ-500 350 500 350 500 350 350 500 500 500 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* Similar to 062AP pattern but with low-resistance grid. Normally used when 120-ohm resistance is needed in WK or SK Series. 2X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.114 0.062 0.062 1.57 2.90 1.57 1.57 0.26L x 0.16W MATRIX SIZE 6.6L x 4.1W 062DF WK-XX-062AU-120 SK-XX-062AU-120 120 0.3% 120 0.3% W* General-purpose gage with solder tab at each end of grid. See also 062DN pattern. 2X 1X GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage. Similar to 062AP pattern but with highresistance grid. See also 062UW pattern. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.190 0.062 0.062 1.57 4.83 1.57 1.57 MATRIX SIZE 0.32L x 0.16W 8.1L x 4.1W EA-XX-062DF-120 ED-DY-062DF-350 WA-XX-062DF-120 WK-XX-062DF-350 EP-08-062DF-120 SA-XX-062DF-120 SK-XX-062DF-350 SD-DY-062DF-350 WD-DY-062DF-350 120 350 120 350 120 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% E, L, LE E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 22 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 062DN GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Similar to 062DF pattern except for grid resistance. 1X GAGE LENGTH 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.190 0.062 0.062 1.57 4.83 1.57 1.57 MATRIX SIZE 0.34L x 0.18W 8.6L x 4.6W 062ED EA-XX-062DN-350 ED-DY-062DN-500 WA-XX-062DN-350 WK-XX-062DN-500 EP-08-062DN-350 SA-XX-062DN-350 SK-XX-062DN-500 SD-DY-062DN-500 WD-DY-062DN-500 350 500 350 500 350 350 500 500 500 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% E, L, LE E, L*, LE* General-purpose gage. Similar to 062DF pattern but with solder tab at each side of grid. See also 062EN pattern 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.076 0.062 0.190 1.57 1.93 1.57 4.83 MATRIX SIZE 0.21L x 0.29W 5.3L x 7.4W EA-XX-062ED-120 ED-DY-062ED-350 WA-XX-062ED-120 WK-XX-062ED-350 EP-08-062ED-120 SA-XX-062ED-120 SK-XX-062ED-350 SD-DY-062ED-350 WD-DY-062ED-350 120 350 120 350 120 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% E, L, LE E, L*, LE* 062EN Similar to 062ED pattern except for grid resistance. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.062 0.076 0.062 0.190 1.57 1.93 1.57 4.83 MATRIX SIZE 0.23L x 0.31W 5.8L x 7.9W EA-XX-062EN-350 ED-DY-062EN-500 WA-XX-062EN-350 WK-XX-062EN-500 EP-08-062EN-350 SA-XX-062EN-350 SK-XX-062EN-500 SD-DY-062EN-500 WD-DY-062EN-500 350 500 350 500 350 350 500 500 500 0.15% 0.4% 0.3% 0.3% 0.15% 0.3% 0.3% 0.8% 0.8% E, L, LE E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 23 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter `C' FEATURE 062UW 1X GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. GRID WIDTH OVERALL WIDTH 0.062 0.220 0.120 0.120 1.57 5.59 3.05 3.05 0.31L x 0.19W 7.9L x 4.8W 070LC OPTIONS AVAILABLE General-purpose gage. Exposed solder tab area is 0.07 x 0.04 in (1.8 x 1.0 mm). CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. 2X OVERALL LENGTH MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. Available with Option P2 (preattached leadwire cables) CEA-XX-062UW-120 CEA-XX-062UW-350 120 0.3% 350 0.3% Very narrow gage for use in restricted areas. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.070 0.164 0.022 0.022 1.78 4.17 0.56 0.56 MATRIX SIZE 0.24L x 0.09W 6.1L x 2.3W EA-XX-070LC-120 EA-XX-070LC-350 120 0.15% 350 0.15% SE SE 075AA General-purpose gage with large solder tabs. See also 075AM pattern. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.075 0.180 0.075 0.120 1.91 4.57 1.91 3.05 MATRIX SIZE www.vishaymg.com 24 0.31L x 0.18W 7.9L x 4.6W EA-XX-075AA-120 ED-DY-075AA-350 micro-measurements@vishay.com 120 0.15% 350 0.3% E, P E Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 075AM GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.180 0.075 0.120 1.91 4.57 1.91 3.05 MATRIX SIZE 0.31L x 0.18W 7.9L x 4.6W 090DG EA-XX-075AM-350 ED-DY-075AM-10C 350 0.15% 1000 0.4% E, P E Intermediate-size grid with tab at each end. See also 090DH and 090EF patterns. 2X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.090 0.250 0.125 0.125 2.29 6.35 3.18 3.18 MATRIX SIZE 0.44L x 0.26W 11.2L x 6.6W 090DH EA-XX-090DG-120 ED-DY-090DG-350 EP-08-090DG-120 SA-XX-090DG-120 SK-XX-090DG-350 SD-DY-090DG-350 120 350 120 120 350 350 0.15% 0.4% 0.15% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* High-resistance version of the 090DG pattern. 2X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.090 0.250 0.125 0.125 2.29 6.35 3.18 3.18 MATRIX SIZE OPTIONS AVAILABLE 2X 0.075 GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage with large solder tabs. Similar to 075AA pattern except for resistance. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.45L x 0.27W 11.4L x 6.9W EA-XX-090DH-350 ED-DY-090DH-10C EP-08-090DH-350 SA-XX-090DH-350 SK-XX-090DH-10C SD-DY-090DH-10C 350 1000 350 350 1000 1000 0.15% 0.4% 0.15% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 25 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 090EF GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Similar to 090DG pattern but with solder tab at each side of grid. See also 090EG pattern. 1X GAGE LENGTH 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.090 0.125 0.125 0.250 2.29 3.18 3.18 6.35 MATRIX SIZE 0.29L x 0.36W 7.4L x 9.1W EA-XX-090EF-120 ED-DY-090EF-350 EP-08-090EF-120 SA-XX-090EF-120 SK-XX-090EF-350 SD-DY-090EF-350 120 350 120 120 350 350 0.15% 0.4% 0.15% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* 090EG High-resistance version of the 090EF pattern. 1X GAGE LENGTH 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.090 0.120 0.125 0.250 2.29 3.05 3.18 6.35 0.29L x 0.36W MATRIX SIZE 7.4L x 9.1W 090SC 350 1000 350 350 1000 1000 0.15% 0.4% 0.15% 0.3% 0.3% 0.8% E, L, LE E, L*, LE* Side-tab gage with extremely narrow grid for use near abutments. 2X 1X GAGE LENGTH EA-XX-090EG-350 ED-DY-090EG-10C EP-08-090EG-350 SA-XX-090EG-350 SK-XX-090EG-10C SD-DY-090EG-10C OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.090 0.120 0.010 0.060 2.29 3.05 0.25 1.52 MATRIX SIZE 0.18L x 0.14W 4.6L x 3.6W EA-XX-090SC-120 WA-XX-090SC-120 SA-XX-090SC-120 120 0.2% 120 0.4% 120 0.4% W, E, L, LE, P W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 26 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 100BR GAGE LENGTH OPTIONS AVAILABLE 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.100 0.225 0.050 0.100 2.54 5.72 1.27 2.54 MATRIX SIZE 0.34L x 0.16W 8.6L x 4.1W 100GD EA-XX-100BR-120 ED-DY-100BR-350 WA-XX-100BR-120 WK-XX-100BR-350 SA-XX-100BR-120 SK-XX-100BR-350 SD-DY-100BR-350 WD-DY-100BR-350 120 350 120 350 120 350 350 350 0.15% 0.4% 0.3% 0.3% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* Ultra-high-resistance gage with compact geometry. 2X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.100 0.181 0.080 0.080 2.54 4.60 2.03 2.03 MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. Narrow grid pattern with large solder tabs. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.24L x 0.13W 6.1L x 3.3W SK-XX-100GD-45C WK-XX-100GD-45C 4500 0.2% 4500 0.2% 125AA General-purpose gage with large solder tabs. See also 125AD, 125UN and 125UW patterns. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.300 0.125 0.200 3.18 7.62 3.18 5.08 MATRIX SIZE 0.46L x 0.26W 11.7L x 6.6W EA-XX-125AA-120 ED-DY-125AA-350 120 0.15% 350 0.3% E, P E *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 27 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.250 0.125 0.125 3.18 6.35 3.18 3.18 0.40L x 0.22W MATRIX SIZE 10.2L x 5.6W 125AD GAGE LENGTH OPTIONS AVAILABLE EA-XX-125AC-350 ED-DY-125AC-10C EK-XX-125AC-10C S2K-XX-125AC-10C WA-XX-125AC-350 WK-XX-125AC-10C EP-08-125AC-350 SA-XX-125AC-350 SK-XX-125AC-10C SD-DY-125AC-10C WD-DY-125AC-10C 350 1000 1000 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W, SE W* W* Widely used general-purpose gage. See also 125AC pattern. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.250 0.125 0.125 3.18 6.35 3.18 3.18 MATRIX SIZE 0.40L x 0.22W 10.2L x 5.6W 125AM GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. Widely used general-purpose gage with high-resistance grid. See also 125AD, 125UN, and 125UW patterns. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 125AC GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. EA-XX-125AD-120 ED-DY-125AD-350 EK-XX-125AD-350 WA-XX-125AD-120 WK-XX-125AD-350 EP-08-125AD-120 SA-XX-125AD-120 SK-XX-125AD-350 SD-DY-125AD-350 WD-DY-125AD-350 120 350 350 120 350 120 120 350 350 350 0.15% 0.3% 0.15% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W, SE W* W* General-purpose gage with large solder tabs and high-resistance grid. See the 125AC design for WA, SK, and other series with this grid size. See also 125UW pattern. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.300 0.125 0.200 3.18 7.62 3.18 5.08 MATRIX SIZE 0.50L x 0.28W 12.7L x 7.1W EA-XX-125AM-350 ED-DY-125AM-10C 350 0.15% 1000 0.3% E, P E *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 28 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 125AS High-resistance gage. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.250 0.125 0.125 3.18 6.35 3.18 3.18 MATRIX SIZE 0.37L x 0.21W 9.4L x 5.3W 125BB OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.245 0.088 0.088 3.18 6.22 2.24 2.24 MATRIX SIZE 0.43L x 0.22W 10.9L x 5.6W 125BS 0.15% 0.4% 0.3% 0.3% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E W* W* EA-XX-125BB-120 ED-DY-125BB-350 WA-XX-125BB-120 WK-XX-125BB-350 EP-08-125BB-120 SA-XX-125BB-120 SK-XX-125BB-350 SD-DY-125BB-350 WD-DY-125BB-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% E, P E Narrow pattern primarily used in the WK and SK Series for 120-ohm resistance. 2X 1X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.250 0.050 0.060 3.18 6.35 1.27 1.52 MATRIX SIZE 500 1500 500 1500 500 1500 1500 1500 Narrow general-purpose gage with extended tabs. GAGE LENGTH GAGE LENGTH EA-XX-125AS-500 ED-DY-125AS-15C WA-XX-125AS-500 WK-XX-125AS-15C SA-XX-125AS-500 SK-XX-125AS-15C SD-DY-125AS-15C WD-DY-125AS-15C 0.38L x 0.14W 9.7L x 3.6W ED-DY-125BS-120 WK-XX-125BS-120 SK-XX-125BS-120 SD-DY-125BS-120 WD-DY-125BS-120 120 120 120 120 120 0.3% 0.3% 0.3% 0.6% 0.6% E, L*, LE* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 29 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 125BT GAGE LENGTH OPTIONS AVAILABLE 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.215 0.062 0.062 3.18 5.46 1.57 1.57 MATRIX SIZE 0.37L x 0.16W 9.4L x 4.1W EA-XX-125BT-120 ED-DY-125BT-350 WA-XX-125BT-120 WK-XX-125BT-350 EP-08-125BT-120 SA-XX-125BT-120 SK-XX-125BT-350 SD-DY-125BT-350 WD-DY-125BT-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* Narrow high-resistance gage with compact geometry. Similar to 125BT pattern except for grid resistance. EK-Series gages are supplied with duplex copper dots (DD) when optional feature W or SE is not specified. 125BZ 1X 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.220 0.062 0.062 3.18 5.59 1.57 1.57 MATRIX SIZE 0.29L x 0.13W 7.4L x 3.3W 125CA GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage with narrow grid and compact geometry. See also 125BZ pattern. 1X GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. EA-XX-125BZ-350 ED-DY-125BZ-10C EK-XX-125BZ-10C WA-XX-125BZ-350 WK-XX-125BZ-10C SA-XX-125BZ-350 SK-XX-125BZ-10C SD-DY-125BZ-10C WD-DY-125BZ-10C 350 1000 1000 350 1000 350 1000 1000 1000 0.15% 0.4% 0.15% 0.3% 0.3% 0.3% 0.3% 0.8% 0.8% W, E, L, LE, P E, L*, LE* W* W* High-dissipation gage with large solder tabs. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.315 0.180 0.180 3.18 8.00 4.57 4.57 MATRIX SIZE 0.43L x 0.26W 10.9L x 6.6W EA-XX-125CA-120 ED-DY-125CA-350 WA-XX-125CA-120 WK-XX-125CA-350 EP-08-125CA-120 WD-DY-125CA-350 120 350 120 350 120 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.6% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 30 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 125CH High-dissipation, low-resistance gage used in eight-gage bridge circuits. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.290 0.175 0.175 3.18 7.37 4.45 4.45 MATRIX SIZE 0.40L x 0.28W 10.2L x 7.1W 125DP GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.270 0.125 0.125 3.18 6.86 3.18 3.18 0.34L x 0.19W 8.6L x 4.8W 125DQ GAGE LENGTH 0.15% 0.3% 0.3% 0.3% 0.3% W, E, SE, L, LE, P W* W* EA-XX-125DP-350 ED-DY-125DP-10C EP-08-125DP-350 SA-XX-125DP-350 SK-XX-125DP-10C SD-DY-125DP-10C 350 1000 350 350 1000 1000 0.15% 0.3% 0.15% 0.3% 0.3% 0.6% E, L, LE E Similar to 125DP pattern except for grid resistance. See also 125UE pattern. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.270 0.125 0.125 3.18 6.86 3.18 3.18 MATRIX SIZE 60 60 175 60 175 High-resistance gage with tab at each end of grid. See also 125DQ and 125UE patterns. 0.125 MATRIX SIZE EA-XX-125CH-060 WA-XX-125CH-060 WK-XX-125CH-175 SA-XX-125CH-060 SK-XX-125CH-175 0.34L x 0.19W 8.6L x 4.8W EA-XX-125DQ-120 ED-DY-125DQ-350 EP-08-125DQ-120 SA-XX-125DQ-120 SK-XX-125DQ-350 SD-DY-125DQ-350 120 350 120 120 350 350 0.15% 0.3% 0.15% 0.3% 0.3% 0.6% E, L, LE E *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 31 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 125EP GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE High-resistance gage with tab at each side of grid. See also 125EQ pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.150 0.125 0.250 3.18 3.81 3.18 6.35 MATRIX SIZE 0.28L x 0.35W 7.1L x 8.9W EA-XX-125EP-350 ED-DY-125EP-10C EP-08-125EP-350 SA-XX-125EP-350 SK-XX-125EP-10C SD-DY-125EP-10C 350 1000 350 350 1000 1000 0.15% 0.3% 0.15% 0.3% 0.3% 0.6% E, L, LE E 125EQ Similar to 125EP pattern except for grid resistance. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.150 0.125 0.250 3.18 3.81 3.18 6.35 0.28L x 0.35W MATRIX SIZE 7.1L x 8.9W 125GF 120 350 120 120 350 350 0.15% 0.3% 0.15% 0.3% 0.3% 0.6% E, L, LE E Very high resistance in compact grid geometry. 1X GAGE LENGTH EA-XX-125EQ-120 ED-DY-125EQ-350 EP-08-125EQ-120 SA-XX-125EQ-120 SK-XX-125EQ-350 SD-DY-125EQ-350 2X OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.210 0.100 0.100 3.18 5.33 2.54 2.54 MATRIX SIZE www.vishaymg.com 32 0.28L x 0.17W 7.1L x 4.3W SK-XX-125GF-20C WK-XX-125GF-20C micro-measurements@vishay.com 2000 0.3% 2000 0.3% Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 125HN Narrow general-purpose gage with tab at each end of grid. See also 125UE pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.275 0.062 0.062 3.18 6.99 1.57 1.57 0.41L x 0.16W MATRIX SIZE 10.4L x 4.1W 125MG 120 350 120 120 350 0.15% 0.3% 0.15% 0.3% 0.3% E, L, LE Dual-pattern gage for use in back-to-back bending applications. Longitudinal grid centerlines spaced 0.250 in (6.35 mm) apart. See also 125PC pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 ES 0.220 CP 0.125 ES 0.375 CP 3.18 ES 5.59 CP 3.18 ES 9.53 CP MATRIX SIZE 0.32L x 0.47W 8.1L x 11.9W 125MK EA-XX-125MG-120 WA-XX-125MG-120 WK-XX-125MG-350 SA-XX-125MG-120 SK-XX-125MG-350 120 120 350 120 350 0.2% 0.4% 0.4% 0.4% 0.4% W, E, L, LE W* W* Compact pattern for applications similar to those described for 125MG. Very narrow grid geometry. Longitudinal grid centerlines spaced 0.040 in (1.02 mm) apart. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 ES 0.235 CP 0.030 ES 0.130 CP 3.18 ES 5.97 CP 0.76 ES 3.30 CP MATRIX SIZE EA-XX-125HN-120 ED-DY-125HN-350 EP-08-125HN-120 SA-XX-125HN-120 SK-XX-125HN-350 0.37L x 0.21W 9.4L x 5.3W EA-XX-125MK-120 WA-XX-125MK-120 WK-XX-125MK-350 SA-XX-125MK-120 SK-XX-125MK-350 120 120 350 120 350 0.2% 0.4% 0.4% 0.4% 0.4% W, E W* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 33 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Dual-pattern gage for use in back-to-back bending applications. Longitudinal grid centerlines spaced 0.085 in (2.16 mm) apart. See also 125MG pattern. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 125PC GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 ES 0.205 CP 0.065 ES 0.150 CP 3.18 ES 5.21 CP 1.65 ES 3.81 CP MATRIX SIZE 0.29L x 0.23W 7.4L x 5.8W 125UE `C' FEATURE GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.470 0.125 0.125 3.18 11.94 3.18 3.18 MATRIX SIZE 0.57L x 0.20W 125UN GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 14.5L x 5.1W `C' FEATURE OVERALL LENGTH GRID WIDTH 0.275 0.100 0.120 3.18 6.99 2.54 3.05 0.38L x 0.19W 120 350 350 1000 1000 120 350 350 1000 120 350 350 1000 0.2% 0.2% 0.4% 0.4% 0.2% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 9.7L x 4.8W W, E, L, LE W, E, L, LE E E W, SE W* W* W* W* General-purpose gage with large tab at each end of grid. Exposed solder tab area 0.08 x 0.07 in (2.0 x 1.8 mm). CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. CEA-XX-125UE-120 CEA-XX-125UE-350 120 0.3% 350 0.3% General-purpose gage with narrow geometry. Exposed solder tab area 0.06 x 0.05 in (1.5 x 1.1 mm). See also 125UW pattern. CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. OVERALL WIDTH 0.125 MATRIX SIZE EA-XX-125PC-120 EA-XX-125PC-350 ED-DY-125PC-350 ED-DY-125PC-10C EK-XX-125PC-10C WA-XX-125PC-120 WA-XX-125PC-350 WK-XX-125PC-350 WK-XX-125PC-10C SA-XX-125PC-120 SA-XX-125PC-350 SK-XX-125PC-350 SK-XX-125PC-10C Available with Option P2 (preattached leadwire cables) CEA-XX-125UN-120 CEA-XX-125UN-350 120 0.3% 350 0.3% *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 34 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix 125UW GAGE LENGTH inch millimeter `C' FEATURE OVERALL LENGTH GRID WIDTH 0.325 0.180 0.180 3.18 8.26 4.57 4.57 0.42L x 0.27W RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. 10.7L x 6.9W OPTIONS AVAILABLE General-purpose gage. Exposed solder tab area 0.10 x 0.07 (2.5 x 1.8 mm). See also 125UN pattern. CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. OVERALL WIDTH 0.125 MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. Available with Option P2 (preattached leadwire cables) CEA-XX-125UW-120 CEA-XX-125UW-350 120 0.3% 350 0.3% 187BB Narrow general-purpose gage with long tabs. See also 187UW pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.187 0.368 0.131 0.131 4.75 9.35 3.33 3.33 MATRIX SIZE 0.55L x 0.26W 14.0L x 6.6W 187UW `C' FEATURE GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.187 0.387 0.180 0.180 4.75 9.83 4.57 4.57 MATRIX SIZE 0.49L x 0.27W 12.4L x 6.9W EA-XX-187BB-120 ED-DY-187BB-350 WA-XX-187BB-120 WK-XX-187BB-350 EP-08-187BB-120 SA-XX-187BB-120 SK-XX-187BB-350 SD-DY-187BB-350 WD-DY-187BB-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* General-purpose gage. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8 mm). CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. Available with Option P2 (preattached leadwire cables). CEA-XX-187UW-120 CEA-XX-187UW-350 120 0.3% 350 0.3% *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 35 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 200MB GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE Dual-grid gage. Narrow pattern geometry. Grid centerlines are spaced 0.030 in (0.8 mm) apart. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.200 ES 0.330 CP 0.020 ES 0.130 CP 5.08 ES 8.38 CP 0.51 ES 3.30 CP 0.50L x 0.21W MATRIX SIZE 12.7L x 5.3W 230DS EA-XX-200MB-120 WA-XX-200MB-120 WK-XX-200MB-350 SA-XX-200MB-120 SK-XX-200MB-350 120 120 350 120 350 0.2% 0.4% 0.4% 0.4% 0.4% W, E, L, LE W* W* General-purpose gage with very narrow geometry. 2X 1X GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.230 0.375 0.022 0.030 5.84 9.53 0.56 0.76 0.50L x 0.12W MATRIX SIZE 12.7L x 3.0W 250AE EA-XX-230DS-120 ED-DY-230DS-350 WA-XX-230DS-120 WK-XX-230DS-350 EP-08-230DS-120 SA-XX-230DS-120 SK-XX-230DS-350 SD-DY-230DS-350 120 350 120 350 120 120 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% E, SE, L, LE E General-purpose gage with high-dissipation grid. See also 250AF pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.415 0.250 0.250 6.35 10.54 6.35 6.35 MATRIX SIZE 0.57L x 0.36W 14.5L x 9.1W EA-XX-250AE-350 ED-DY-250AE-10C WA-XX-250AE-350 WK-XX-250AE-10C EP-08-250AE-350 SA-XX-250AE-350 SK-XX-250AE-10C SD-DY-250AE-10C WD-DY-250AE-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 36 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 250AF RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE General-purpose gage with high-dissipation grid. Similar to 250AE pattern except for resistance. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.415 0.250 0.250 6.35 10.54 6.35 6.35 MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.57L x 0.36W 14.5L x 9.1W EA-XX-250AF-120 ED-DY-250AF-350 WA-XX-250AF-120 WK-XX-250AF-350 EP-08-250AF-120 SA-XX-250AF-120 SK-XX-250AF-350 SD-DY-250AF-350 WD-DY-250AF-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* 250BA Primarily used in eight-gage bridge circuits. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.375 0.125 0.125 6.35 9.53 3.18 3.18 MATRIX SIZE 0.53L x 0.22W 13.5L x 5.6W EA-XX-250BA-175 ED-DY-250BA-500 WA-XX-250BA-175 WK-XX-250BA-500 SA-XX-250BA-175 SK-XX-250BA-500 SD-DY-250BA-500 WD-DY-250BA-500 175 500 175 500 175 500 500 500 0.15% 0.3% 0.3% 0.3% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* 250BB General-purpose gage with large solder tabs. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.490 0.175 0.175 6.35 12.45 4.45 4.45 MATRIX SIZE 0.64L x 0.27W 16.3L x 6.9W EA-XX-250BB-120 ED-DY-250BB-350 EP-08-250BB-120 120 0.15% 350 0.3% 120 0.15% W, E, L, LE, P E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 37 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE General-purpose gage with high-resistance grid. Compact geometry. Similar to 250BG pattern except for resistance. See also 250BM and 250UW patterns. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 250BF GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.375 0.125 0.125 6.35 9.53 3.18 3.18 MATRIX SIZE 0.52L x 0.22W 13.2L x 5.6W 250BG EA-XX-250BF-350 ED-DY-250BF-10C EK-XX-250BF-10C S2K-XX-250BF-10C WA-XX-250BF-350 WK-XX-250BF-10C EP-08-250BF-350 SA-XX-250BF-350 SK-XX-250BF-10C SD-DY-250BF-10C WD-DY-250BF-10C 350 1000 1000 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W, SE W* W* Widely used general-purpose gage. Compact geometry. See also 250BF and 250UN patterns. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.375 0.125 0.125 6.35 9.53 3.18 3.18 0.52L x 0.22W MATRIX SIZE 13.2L x 5.6W EA-XX-250BG-120 ED-DY-250BG-350 WA-XX-250BG-120 WK-XX-250BG-350 EA-XX-250BG-100 EP-08-250BG-120 SA-XX-250BG-120 SK-XX-250BG-350 SD-DY-250BG-350 WD-DY-250BG-350 120 350 120 350 100 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* 1000 0.15% W, E, L, LE, P 250GG Narrow high-resistance gage. GAGE LENGTH OVERALL LENGTH 0.250 0.352 0.100 0.100 6.35 8.94 2.54 2.54 MATRIX SIZE GRID WIDTH 0.43L x 0.18W OVERALL WIDTH 10.9L x 4.6W EA-XX-250GG-10C *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 38 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 250BK OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.430 0.175 0.175 6.35 10.92 4.45 4.45 0.58L x 0.27W 14.7L x 6.9W 250BM OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.375 0.125 0.125 6.35 9.53 3.18 3.18 0.58L x 0.27W 14.7L x 6.9W 250BP GAGE LENGTH EA-XX-250BK-10C WA-XX-250BK-10C WK-XX-250BK-30C SA-XX-250BK-10C SK-XX-250BK-30C 1000 1000 3000 1000 3000 0.15% 0.3% 0.3% 0.3% 0.3% W, E, L, LE, P W* W* EA-XX-250BM-500 ED-DY-250BM-15C WA-XX-250BM-500 WK-XX-250BM-15C EP-08-250BM-500 SA-XX-250BM-500 SK-XX-250BM-15C SD-DY-250BM-15C WD-DY-250BM-15C 500 1500 500 1500 500 500 1500 1500 1500 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* A general-purpose gage used primarily to obtain 120-ohm grid resistance in SK and WK Series. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.375 0.125 0.125 6.35 9.53 3.18 3.18 MATRIX SIZE OPTIONS AVAILABLE A higher resistance version of the 250BF pattern. GAGE LENGTH MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. High-resistance gage with good power dissipation capability for highoutput applications or use on plastics. GAGE LENGTH MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.53L x 0.22W 13.5L x 5.6W SK-XX-250BP-120 WK-XX-250BP-120 ED-DY-250BP-120 SD-DY-250BP-120 WD-DY-250BP-120 120 120 120 120 120 0.3% 0.3% 0.3% 0.6% 0.6% W* E, L*, LE* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 39 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 250DM OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.450 0.250 0.250 6.35 11.43 6.35 6.35 MATRIX SIZE 0.61L x 0.35W 15.5L x 8.9W 250EM OPTIONS AVAILABLE EA-XX-250DM-120 ED-DY-250DM-350 WA-XX-250DM-120 WK-XX-250DM-350 EP-08-250DM-120 SA-XX-250DM-120 SK-XX-250DM-350 SD-DY-250DM-350 WD-DY-250DM-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% E, L, LE E, L*, LE* General-purpose gage. Similar to 250DM pattern but with tab at each side of grid. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.290 0.250 0.400 6.35 7.37 6.35 10.16 MATRIX SIZE 0.44L x 0.48W 11.2L x 12.2W EA-XX-250EM-120 ED-DY-250EM-350 WA-XX-250EM-120 WK-XX-250EM-350 EP-08-250EM-120 SA-XX-250EM-120 SK-XX-250EM-350 SD-DY-250EM-350 WD-DY-250EM-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% E, L, LE E, L*, LE* Dual pattern for back-to-back bending applications. Longitudinal grid centerlines are spaced 0.185 in (4.70 mm) apart. See also 250PD pattern. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 250MQ GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage with solder tab at each end of grid. See also 250EM pattern. GAGE LENGTH GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250ES 0.375 CP 0.125 ES 0.310 CP 6.35 ES 9.53 CP 3.18 ES 7.87 CP MATRIX SIZE 0.47L x 0.40W 11.9L x 10.2W EA-XX-250MQ-350 ED-DY-250MQ-10C EK-XX-250MQ-10C WA-XX-250MQ-350 WK-XX-250MQ-10C SA-XX-250MQ-350 SK-XX-250MQ-10C SD-DY-250MQ-10C WD-DY-250MQ-10C 350 1000 1000 350 1000 350 1000 1000 1000 0.2% 0.4% 0.2% 0.3% 0.4% 0.3% 0.4% 0.8% 0.8% W, E, L, LE E, L*, LE* W, SE W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 40 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250ES 0.358 CP 0.110 ES 0.240 CP 6.35 ES 9.09 CP 2.79 ES 6.10 CP 0.44L x 0.32W 11.2L x 8.1W 250SD GAGE LENGTH OPTIONS AVAILABLE EA-XX-250PD-120 EA-XX-250PD-350 ED-DY-250PD-350 EK-XX-250PD-10C S2K-XX-250PD-10C WA-XX-250PD-120 WA-XX-250PD-350 WK-XX-250PD-350 WK-XX-250PD-10C SA-XX-250PD-120 SA-XX-250PD-350 SK-XX-250PD-350 SK-XX-250PD-10C SD-DY-250PD-350 WD-DY-250PD-350 120 350 350 1000 1000 120 350 350 1000 120 350 350 1000 350 350 0.2% 0.2% 0.4% 0.2% 0.4% 0.3% 0.3% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 0.8% 0.8% W, E, L, LE W, E, L, LE E W, SE W* W* W* W* General-purpose gage for use near abutments and in restricted areas. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.320 0.120 0.190 6.35 8.13 3.05 4.83 MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. Dual-element pattern with longitudinal grid centerlines spaced 0.130 in (3.30 mm) apart. See also 250MQ pattern. EK-Series gages are supplied with duplex copper pads (DP) when optional feature W or SE is not specified. 250PD MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.45L x 0.30W 250UN 11.4L x 7.6W `C' FEATURE EA-XX-250SD-350 ED-DY-250SD-10C WA-XX-250SD-350 WK-XX-250SD-10C EP-08-250SD-350 SA-XX-250SD-350 SK-XX-250SD-10C SD-DY-250SD-10C WD-DY-250SD-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* General-purpose gage with narrow geometry. Exposed solder tab area 0.08 x 0.05 in (2.0 x 1.1 mm). See also 250UW pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. 0.250 0.415 0.120 0.120 Available with Option P2 (preattached leadwire cables). 6.35 10.54 3.05 3.05 MATRIX SIZE 0.52L x 0.22W 13.2L x 5.6W CEA-XX-250UN-120 CEA-XX-250UN-350 120 0.3% 350 0.3% *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 41 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix 250UW `C' FEATURE OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.250 0.450 0.180 0.180 11.43 4.57 0.55L x 0.27W MATRIX SIZE 4.57 14.0L x 6.9W 350DD GAGE LENGTH OPTIONS AVAILABLE CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. CEA-XX-250UW-120 CEA-XX-250UW-175 CEA-XX-250UW-350 CEA-XX-250UW-10C 120 175 350 1000 0.3% 0.3% 0.3% 0.3% Available with Option P2 (preattached leadwire cables). General-purpose gage with narrow pattern geometry and tab at each end of grid. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.350 0.500 0.100 0.100 8.89 12.70 2.54 2.54 MATRIX SIZE 0.61L x 0.18W 15.5L x 4.6W 375BG GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. General-purpose gage. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8 mm). See also 250UN pattern. GAGE LENGTH 6.35 GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. EA-XX-350DD-350 ED-DY-350DD-10C WA-XX-350DD-350 WK-XX-350DD-10C EP-08-350DD-350 SA-XX-350DD-350 SK-XX-350DD-10C SD-DY-350DD-10C WD-DY-350DD-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% E, L, LE E General-purpose gage. See also 375UW pattern. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.375 0.563 0.187 0.187 9.53 14.30 4.75 4.75 MATRIX SIZE 0.71L X 0.29W 18.0L x 7.4W EA-XX-375BG-120 ED-DY-375BG-350 WA-XX-375BG-120 WK-XX-375BG-350 EP-08-375BG-120 SA-XX-375BG-120 SK-XX-375BG-350 SD-DY-375BG-350 WD-DY-375BG-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 42 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix 375UW GAGE LENGTH inch millimeter `C' FEATURE OVERALL LENGTH GRID WIDTH 0.575 0.180 0.180 9.53 14.61 4.57 4.57 0.67L x 0.27W 17.0L x 6.9W 500AE GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.850 0.500 0.500 12.70 21.59 12.70 12.70 0.95L x 0.60W 24.1L x 15.2W 500AF GAGE LENGTH General-purpose gage. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8 mm). CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. Available with Option P2 (preattached leadwire cables). CEA-XX-375UW-120 CEA-XX-375UW-350 120 0.3% 350 0.3% EA-XX-500AE-350 ED-DY-500AE-10C WA-XX-500AE-350 WK-XX-500AE-10C EP-08-500AE-350 SA-XX-500AE-350 SK-XX-500AE-10C SD-DY-500AE-10C WD-DY-500AE-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* Large gage with very high power-dissipation capability. See also 500AE pattern. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.830 0.500 0.500 12.70 21.08 12.70 12.70 MATRIX SIZE OPTIONS AVAILABLE Large gage with very high power-dissipation capability. Similar to 500AF pattern but higher resistance. 0.500 MATRIX SIZE RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OVERALL WIDTH 0.375 MATRIX SIZE GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 0.98L x 0.58W 24.9L x 14.7W EA-XX-500AF-120 ED-DY-500AF-350 WA-XX-500AF-120 WK-XX-500AF-350 EP-08-500AF-120 SA-XX-500AF-120 SK-XX-500AF-350 SD-DY-500AF-350 WD-DY-500AF-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 43 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 500BC Special-resistance version of the 500BH pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.710 0.175 0.175 12.70 18.03 4.45 4.45 MATRIX SIZE 0.77L x 0.23W 19.6L x 5.8W 500BH GAGE LENGTH 200 600 200 600 200 200 600 600 600 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* Widely used general-purpose gage with compact geometry. See also 500BL and 500UW patterns. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.720 0.175 0.175 12.70 18.29 4.45 4.45 MATRIX SIZE 0.92L x 0.30W 23.4L x 7.6W 500BL GAGE LENGTH EA-XX-500BC-200 ED-DY-500BC-600 WA-XX-500BC-200 WK-XX-500BC-600 EP-08-500BC-200 SA-XX-500BC-200 SK-XX-500BC-600 SD-DY-500BC-600 WD-DY-500BC-600 EA-XX-500BH-120 ED-DY-500BH-350 WA-XX-500BH-120 WK-XX-500BH-350 EP-08-500BH-120 SA-XX-500BH-120 SK-XX-500BH-350 SD-DY-500BH-350 WD-DY-500BH-350 120 0.15% 350 0.3% 120 0.3% 350 0.3% 1200.15% 120 0.3% 350 0.3% 350 0.6% 350 0.6% W, E, L, LE, P E, L*, LE* W* W* General-purpose gage. Similar to 500BH pattern except for resistance. See also 500UW pattern. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.720 0.175 0.175 12.70 18.29 4.45 4.45 MATRIX SIZE 0.87L x 0.27W 22.1L x 6.9W EA-XX-500BL-350 ED-DY-500BL-10C WA-XX-500BL-350 WK-XX-500BL-10C EP-08-500BL-350 SA-XX-500BL-350 SK-XX-500BL-10C SD-DY-500BL-10C WD-DY-500BL-10C 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. www.vishaymg.com 44 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE 500BV Special-resistance variation of the 500BH pattern. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.720 0.175 0.175 12.70 18.29 4.45 4.45 MATRIX SIZE 0.82L x 0.27W 20.8L x 6.9W 500GA GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.600 0.016 0.060 12.70 15.24 0.41 1.52 0.73L x 0.15W 18.5L x 3.8W 500GB GAGE LENGTH 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W, E, L, LE, P E, L*, LE* W* W* SK-XX-500GA-120 WK-XX-500GA-120 ED-DY-500GA-120 SD-DY-500GA-120 WD-DY-500GA-120 EA-XX-500GA-040 120 120 120 120 120 40 0.3% 0.3% 0.3% 0.3% 0.3% 0.15% W* E, L*, LE* General-purpose gage with very narrow geometry. See also 500GA and 500GC patterns. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.620 0.060 0.060 12.70 15.75 1.52 1.52 MATRIX SIZE 100 300 100 300 100 100 300 300 300 Very narrow gage. Variation of the 500GB pattern, used primarily to obtain 120-ohm resistance in SK and WK Series. 0.500 MATRIX SIZE EA-XX-500BV-100 ED-DY-500BV-300 WA-XX-500BV-100 WK-XX-500BV-300 EP-08-500BV-100 SA-XX-500BV-100 SK-XX-500BV-300 SD-DY-500BV-300 WD-DY-500BV-300 0.75L x 0.15W 19.1L x 3.8W EA-XX-500GB-120 ED-DY-500GB-350 WA-XX-500GB-120 WK-XX-500GB-350 EP-08-500GB-120 SA-XX-500GB-120 SK-XX-500GB-350 SD-DY-500GB-350 WD-DY-500GB-350 120 350 120 350 120 120 350 350 350 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% W*, E, L, LE, P W*, E, L*, LE* W* W* *Options available but not normally recommended. See Optional Features datasheet for details. Document Number: 11508 Revision 26-Aug-03 micro-measurements@vishay.com www.vishaymg.com 45 Linear Patterns Vishay Micro-Measurements General Purpose Strain Gages - Linear Patterns size shown. GAGE PATTERN Actual Enlarged when necessary for definition. ES = Each section CP = Complete pattern S = Section (S1= Sec 1) M = Matrix inch millimeter 500GC GAGE LENGTH RES. IN OHMS Tolerance is increased when Option W, E, SE, LE, or P is specified. OPTIONS AVAILABLE General-purpose gage with very narrow geometry. Similar to the 500GB pattern except for resistance. OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.500 0.620 0.060 0.060 12.70 15.75 1.52 1.52 MATRIX SIZE 0.78L x 0.15W 500UW GAGE LENGTH GAGE DESIGNATION Insert desired S-T-C number in spaces marked XX. 19.8L x 3.8W `C' FEATURE OVERALL LENGTH GRID WIDTH 0.700 0.180 0.180 12.70 17.78 4.57 4.57 0.80L x 0.27W 350 1000 350 1000 350 350 1000 1000 1000 0.15% 0.3% 0.3% 0.3% 0.15% 0.3% 0.3% 0.6% 0.6% 20.3L x 6.9W W*, E, L, LE, P W*, E, L*, LE* W* W* General-purpose gage. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8mm). CEA-Series Strain Gages feature large copper solder tabs and a completely encapsulated grid. OVERALL WIDTH 0.500 MATRIX SIZE EA-XX-500GC-350 ED-DY-500GC-10C WA-XX-500GC-350 WK-XX-500GC-10C EP-08-500GC-350 SA-XX-500GC-350 SK-XX-500GC-10C SD-DY-500GC-10C WD-DY-500GC-10C Available with Option P2 (preattached leadwire cables). CEA-XX-500UW-120 CEA-XX-500UW-350 120 0.3% 350 0.3% *Options available but not normally recommended. See Optional Features datasheet for details. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH MATRIX SIZE www.vishaymg.com 46 micro-measurements@vishay.com Document Number: 11508 Revision 26-Aug-03