DSUBMINIATURE CONNECTOR J SERIES D-sub J Solder pot plug and receptacle SOLDER POT PLUG AND RECEPTACLE --------------------------------- 01 Solder pot Receptacle Solder pot plug Features --------------------------------------------------------- * The receptacle contacts are formed by high-speed stamping presses to obtain the advantages of cold working. They are therefore highly elastic, which in turn ensures reliable connection even after many mating cycles. * The dimples in the plug shell ensure continuity between it and the receptacle shell, thus providing complete shielding. * Costs are kept low by selective gold plating the contacts. * The solder cup portions of the contacts are tin-plated for easy soldering. * Insulator housings are made of a heat-resistant glass-filled PBT resin. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 Specifications ----------------------------------------------------- Materials Connector Plug Receptacle Model number identification Part name Material and Finish J Contact Brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Insulator Glass-filled PBT, UL94V-0, black Shell Mild steel, copper-undercoated, tin/lead-plated * Series name Contact Phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated * Shell size: E, A, B ,C Insulator Glass-filled PBT, UL94V-0, black Shell Mild steel, copper-undercoated, tin/lead-plated Characteristics E Z -- 9 P -- 12 * Wire connection style: Z ... Solder pot type * Number of circuits: 9, 15, 25, 37 Current rating 3A, AC, DC (2A for 37-circuits) Voltage rating 250V AC, DC Temperature range -40C to +85C (including temperature rise in * Connector style: P ... Plug, S ... Receptacle applying electrical current) Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage Note: Contact JST for details. 514 * Finish Blank ... Gold-plated (flash) 13 ... 0.4micron(16micro-inch) gold-plated 90 ... Tin-plated 12 ... 0.2micron(8micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated 1,000V AC/minute Note: 1. The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C 2. Contact JST for special plating requirements. D SUBMINIATURE CONNECTOR J SERIES Plug -------------------------------------------------------------------- 10 A 2.84(.112) 8.35(.329) 12.55(.494) 3.05(.120)dia. B C [5.95(.234)] [10.72(.422)] Dimensions mm(in.) Model No. Circuits Gold-plated Tin-plated A Qty / box B C 9 JEZ- 9P JEZ- 9P-90 16.92( .666) 24.99( .984) 30.80(1.213) 100 15 JAZ-15P JAZ-15P-90 25.25( .994) 33.32(1.321) 39.14(1.541) 100 25 JBZ-25P JBZ-25P-90 38.97(1.534) 47.04(1.852) 53.04(2.088) 50 37 JCZ-37P JCZ-37P-90 55.43(2.182) 63.50(2.500) 69.32(2.729) 50 Receptacle --------------------------------------------------------------- 10 A 2.84(.112) 7.9(.311) 12.55(.494) 3.05(.120)dia. B C 6.18 (.243) [10.9(.429)] Dimensions mm(in.) Model No. Circuits Gold-plated Tin-plated A Qty / box B C 9 JEZ- 9S JEZ- 9S-90 16.34( .643) 24.99( .984) 30.80(1.213) 100 15 JAZ-15S JAZ-15S-90 24.67( .971) 33.33(1.312) 39.14(1.541) 100 25 JBZ-25S JBZ-25S-90 38.38(1.511) 47.04(1.852) 53.04(2.088) 50 37 JCZ-37S JCZ-37S-90 54.84(2.159) 63.50(2.500) 69.32(2.729) 50 515 DSUBMINIATURE CONNECTOR J SERIES D-sub J Right angle through-hole plug and receptacle RIGHT ANGLE THROUGH-HOLE PLUG AND RECEPTACLE ----------------- 01 Right angle through-hole receptacle (with rectangular lock screw blocks) Right angle through-hole plug (with hexagonal lock screw blocks) Right angle through-hole receptacle (with spring lock devices) Features --------------------------------------------------------- * The receptacle contacts are made by high-speed stamping * To ensure complete shielding, a wide variety of grounding presses. This promotes the uniform elasticity of the twin-contact adapters are available so that the receptacles can be grounded to mating sections and therefore ensures reliable contact even after different kinds of supporting structures. repeated mating cycles. The solder tails are U-shaped for extra strength. * Costs are minimized by selective gold plating, high speed stamping presses, and completely automated assembly. 516 * Metric, inch or other lock screw blocks are available for fastening mating plugs. D SUBMINIATURE CONNECTOR J SERIES Specifications ----------------------------------------------------- Materials Characteristics Part name Contact of plug Material and Finish Brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin/lead-plated Current rating 3A, AC, DC (2.0A AC, DC for 37-circuits) Voltage rating 250V AC, DC Temperature range -40C to +85C (including temperature rise in applying electrical current) Contact of receptacle Phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin/lead-plated Insulator Glass-filled PBT, UL94V-0, black Contact resistance Initial value/15m max. After environmental testing/30m max. Shell Mild steel, copper-undercoated, nickel-plated Insulation resistance 5,000M min. Hexagonal lock screw block Mild steel, copper-undercoated, nickel-plated Withstanding voltage 1,000V AC/minute Rectangular lock screw block Zinc, copper-undercoated, nickel-plated Grounding adapter having a 3.2mm(.126") dia. hole Grounding adapter having an M3 tapped hole Grounding adapter having a spring lock lever Applicable PC board thickness Note: Contact JST for details. 1.6mm(.063") Mild steel, copper-undercoated, nickel-plated Standards ---------------------- Brass, copper-undercoated, tin/lead-plated 0 Recognized E60389 1 Certified LR20812 Model number identification J E Y -- 9 S -- 1A 3 A 12 S1 * Series name * Shell size: E, A, B ,C * Wire connection style: Y... Right angle through-hole style * Number of circuits: 9, 15, 25, 37 * Connector style: P ... Plug, S ... Receptacle * Connector construction/Dimensions: Standard J series * Types of grouding adapters 0 ... Without grounding adapters 1 ... With grounding adapters having a 3.2mm(.126") dia. hole 2 ... With grounding adapters having an M3 thread 3 ... With grounding adapters having a spring lock device (1) 4 ... With grounding adapters having a spring lock device (2) * Types of lock screw blocks A ... With hexagonal lock screw blocks having a No. 4-40 UNC inch thread B ... With hexagonal lock screw blocks having an M2.6 thread C ... With rectangular lock screw blocks having an M2.6 thread D ... Without lock screw blocks E ... Without lock screw blocks, but with grounding adapters having a 3.05mm(.120") dia. hole F ... Without lock screw blocks, but with grounding adapters having a No. 4-40UNC inch thread G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread H ... Without lock screw blocks, but with grounding adapters having an M3 thread * Finish Blank ... Gold-plated (flash) 13 ... 0.4micron(16micro-inch) gold-plated 90 ... Tin-plated 12 ... 0.2micron(8micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated * Spring lock devices Blank...Without spring lock devices S or S1...With spring lock devices Note: 1. The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C 2. Contact JST for special plating requirements. 3. Contact JST for the Receptacle with spring lock devices. (Not UL recognized nor CSA certified.) 517 D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug Type A 10 A D 2.84 (.112) 3.2 (.126) 2.84 (.112) 8.35(.329) 12.55(.494) H Type B 0.75 (.030) B C 5.95 (.234) 0.6 (.024) E [18.6(.732)] H: Height of the lock screw block (for Types A, B & C) Model No. Circuits gold-plated plug tin-plated plug Dimensions mm(in.) A B C D E Q'ty / box 9 JEY- 9P-1A** JEY- 9P-1A**90 16.90( .665) 24.99( .984) 30.80(1.213) 8.1(.319) 9.52(.375) 100 15 JAY-15P-1A** JAY-15P-1A**90 25.25( .994) 33.33(1.312) 39.14(1.541) 8.1(.319) 9.52(.375) 60 25 JBY-25P-1A** JBY-25P-1A**90 38.97(1.534) 47.04(1.852) 53.00(2.087) 8.2(.323) 9.62(.379) 40 With hexagonal lock screw blocks (H: 6.3mm (.248")) having a No.4-40UNC inch thread With hexagonal lock screw blocks (H: 6.3mm (.248")) having an M2.6 thread Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UNC inch thread and without grounding adapters is required, specify the model number as JEY-9P-1A0A. No.4-40UNC M2.6 Without grounding adapters 0A 0B 1A 1B 2A 2B 3A 3B - - With grounding adapters with a 3.2mm (.126") dia. hole With grounding adapters with an M3 thread With grounding adapters with a spring lock device (1) With grounding adapters with a spring lock device (2) 518 D Type C Type D Type E SUBMINIATURE CONNECTOR Type F Type G J SERIES Type H With rectangular Without lock screw Without lock screw blocks E: Grounding adapter has no thread. lock screw blocks blocks F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) (H: 6.2mm (.244")) Use a lock screw block *1: No.4-40UNC inch thread *1: M2.6 thread *1: M3 thread having an M2.6 of Model number *2: Model number *2: Model number *2: Model number thread JFS-( )S-C1N. JFS-4S-( )1W(M) JFS-2.6S-( )1W(M) JFS-3S-( )1W(M) 3.05mm (.120")dia. hole M2.6 No.4-40UNC M2.6 M3 0C 0D - - - - 1C 1D 1E 1F 1G - 2C 2D 2E 2F 2G - 3C 3D 3E 3F 3G - - - - - - 4H 519 D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole receptacle Type A 10 A D 2.84 (.112) 3.2 (.126) 2.84 (.112) 7.9(.311) 12.55(.494) H Type B 0.7 (.028) B C 6.18 E (.243) [18.8(.740)] 0.6 (.024) H: Height of the lock screw block (for Types A, B & C) Dimensions mm(in.) Model No. Circuits gold-plated receptacle tin-plated receptacle A B C D E Q'ty / box 9 JEY- 9S-1A** JEY- 9S-1A**90 16.34( .643) 24.99( .984) 30.81(1.213) 8.1(.319) 9.52(.375) 100 15 JAY-15S-1A** JAY-15S-1A**90 24.67( .971) 33.32(1.312) 39.14(1.541) 8.1(.319) 9.52(.375) 60 25 JBY-25S-1A** JBY-25S-1A**90 38.38(1.511) 47.04(1.852) 53.04(2.088) 8.2(.323) 9.62(.379) 40 37 JCY-37S-1A** JCY-37S-1A**90 54.84(2.154) 63.50(2.500) 69.32(2.729) 8.2(.323) 9.62(.379) 40 With hexagonal lock screw blocks (H: 6.3mm (.248")) having a No.4-40UNC inch thread With hexagonal lock screw blocks (H: 6.3mm (.248")) having an M2.6 thread Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UNC inch thread and without grounding adapters is required, specify the model number as JEY-9S-1A0A. No.4-40UNC M2.6 Without grounding adapters 0A 0B 1A 1B 2A 2B 3A 3B - - With grounding adapters with a 3.2mm (.126") dia. hole With grounding adapters with an M3 thread With grounding adapters with a spring lock device (1) With grounding adapters with a spring lock device (2) 520 D Type C Type D Type E SUBMINIATURE CONNECTOR Type F Type G J SERIES Type H With rectangular Without lock screw Without lock screw blocks E: Grounding adapter has no thread. lock screw blocks blocks F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) (H: 6.2mm (.244")) Used a lock screw block *1: No.4-40UNC inch thread *1: M2.6 thread *1: M3 thread having an M2.6 [model number *2: Model number *2: Model number *2: Model number thread JFS-( )S-C1N] JFS-4S-( )1W(M) JFS-2.6S-( )1W(M) JFS-3S-( )1W(M) 3.05mm (.120")dia. hole M2.6 No.4-40UNC M2.6 M3 0C 0D - - - - 1C 1D 1E 1F 1G - 2C 2D 2E 2F 2G - 3C 3D 3E 3F 3G - - - - - - 4H 521 D SUBMINIATURE CONNECTOR J SERIES PC board layout (viewed from component side) ------------------------------------ (15 circuits) 2---3.2 0.1 (.126 .004)dia. 1.37 0.05 (.054 .002) 4.11 0.05 (.162 .002) 24.99 0.15(.984 .006) 15---1.0 0 + (.039 0.004 )dia. 9.60 0.05 (.378 .002) 6.86 0.05(.270 .002) 4.11 0.05 (.162 .002) 1.37 0.05(.054 .002) 9.0(.354) max. 2.74 0.05(.108 .002) + 0.1 2.84 0.05 (.112 0.05) 5.49 0.05 (.216 .002) 9.0(.354) max. + 9---1.0 00.1 + (.039 0.004 )dia. 2.84 0.05 (.112 .002) (9 circuits) 2---3.2 0.1 (.126 .004)dia. 2.74 0.05 (.108 .002) 5.49 0.05 8.23 0.05(.324 .002) (.216 .002) 33.32 0.15(1.312 .006) PC board edge (25 circuits) (37 circuits) PC board edge 24.84 0.05(.978 .002) 22.10 0.05(.870 .002) 19.33 0.05(.761 .002) 1.40 0.05(.055 .002) 4.14 0.05 6.91 0.05(.272 .002) (.163 .002) 9.68 0.05(.381 .002) 12.42 0.05(.489 .002) 15.19 0.05(.598 .002) 47.04 0.15(1.852 .006) 8.28 0.05(.326 .002) 37---1.0 0 + (.039 0.004 )dia. PC board edge 2.77 0.05 5.54 0.05(.218 .002) (.109 .002) 2---3.2 0.1 (.126 .004)dia. 9.0(.354) max. 2---3.2 0.1 (.126 .004)dia. 2.84 0.05 (.112 .002) 2.77 0.05 (.109 .002) 13.82 0.05(.544 .002) 11.05 0.05(.435 .002) + 0.1 9.0(.354) max. 25---1.0 0 + (.039 0.004)dia. 16.56 0.05(.652 .002) 2.84 0.05 (.112 .002) + 0.1 16.56 0.05(.652 .002) 13.82 0.05(.544 .002) 11.05 0.05(.435 .002) 8.28 0.05(.326 .002) 5.54 0.05(.218 .002) 1.40 0.05 (.055 .002) 4.14 0.05 (.163 .002) 6.91 0.05(.272 .002) PC board edge 9.68 0.05(.381 .002) 12.42 0.05(.489 .002) 15.19 0.05(.598 .002) 17.96 0.05(.707 .002) 20.70 0.05(.815 .002) 23.47 0.05(.924 .002) 63.50 0.15(2.500 .006) Panel layout-------------------------------------------------------------- Mounting on the rear side Mounting on the front side A B C 2---3.2 0.1 (.126 .004)dia. 4---1.6R 10 The connector can be mounted either on the front side or on the rear side of the panel as shown above. Use M2.5 or M2.6 screws for installation. 522 DSUBMINIATURE CONNECTOR J SERIES D-sub J Straight through-hole plug and receptacle STRAIGHT THROUGH-HOLE PLUG AND RECEPTACLE--------------------- Straight through-hole plug (with hexagonal lock screw blocks) 01 Straight through-hole receptacle (without lock screw blocks, but with grounding adapters having a No.4-40UNC inch thread) Features --------------------------------------------------------- * Three standard types are available with different dimensions 12mm (.472"). * The roots of the contact leads are covered to prevent flux from 6.0 (.236) between the flange and solder tail: 6mm (.236"), 9mm (.354"), and rising into the connector during soldering. * A grounding adapter with a spring lock device allows the connector to be temporarily secured onto the printed circuit board Standards ---------------------- 0 1 9.0 (.354) so that the connector can be soldered easily. Recognized E60389 12.0 (.472) Certified LR20812 523 D SUBMINIATURE CONNECTOR J SERIES Specifications ----------------------------------------------------- Materials Characteristics Material and Finish Part name Plug Brass, nickel-undercoated, selective gold-plated Receptacle Phosphor bronze, nickel-undercoated, selective gold-plated Current rating 3.0A AC, DC Voltage rating 250V AC, DC -40C to +85C (including temperature rise in Temperature range Contact Insulator Glass-filled PBT, UL94V-0, black Shell Mild steel, copper-undercoated, nickel-plated Heaxagonal lock screw bock Mild steel, copper-undercoated, nickel-plated Grounding adapter with spring lock device Brass, copper-undercoated, tin/lead-plated applying electrical current) Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage 1,000V AC/minute Applicable PC board thickness 1.6mm(.063") *Contact JST for details. Straight through-hole plug Type A H 3.5 2.7 D (.138) (.106) 2.84(.112) 8.35(.329) B C 5.95 6.0 3.2 (.234) (.236) (.126) [15.04(.592)] 2.84(.112) 12.55(.494) 0.5(.020) A 3.5 2.7 D (.138)(.106) H 7.6(.300) 10 9.0 3.2 5.95 (.234) (.354) (.126) [18.04(.710)] 3.5 D (.138) H 2.7 (.106) 12.0 5.95 (.472) (.234) [21.04(.828)] 3.2 (.126) H: Height of the lock screw block (for Types A, B & J) Circuits 9 25 Dimension between flange and solder tail mm(in.) Dimensions mm(in.) Model No. Gold-plated (flash) Plug Gold-plated 0.76micron(30micro-inch) 6 (.236) JES- 9P-2A** JES- 9P-2A**14 9 (.354) JES- 9P-3A** JES- 9P-3A**14 12 (.472) JES- 9P-4A** JES- 9P-4A**14 6 (.236) JBS-25P-2A** JBS-25P-2A**14 9 (.354) JBS-25P-3A** JBS-25P-3A**14 12 (.472) JBS-25P-4A** JBS-25P-4A**14 Q'ty / box A B C D 16.90 (.665) 24.99 (.984) 30.8 (1.213) 2.4 (.094) 100 38.97 (1.534) 47.04 (1.852) 53.0 (2.087) 2.5 (.098) 40 Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a gold-plated (flash) receptacle with hexagonal lock screw blocks having a No. 4-40UNC inch thread and without grounding adapters whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JBS-25P-2A3A. With grounding adapters with a spring lock device 6 mm (.236") type 9 mm (.354") type With hexagonal lock screw blocks (H: 6.3mm (.248")) having a No.4-40UNC inch thread No.4-40UNC 12mm (.472") type 3A 524 D SUBMINIATURE CONNECTOR J SERIES Model number identification * Series name J B S -- 25 P -- 2A 3 F 14 S1 * Shell size: B, E * Wire connection type: S ... Straight through-hole type * Number of circuits: 9, 25 * Connector type: P ... Plug S ... Receptacle * Connector construction/dimensions: 2A ... 6 mm (.236") from flange to solder tail 3A ... 9 mm (.354") from flange to solder tail 4A ... 12mm (.472") from flange to solder tail * Types of grouding adapter: 3 ... Grounding adapter with a spring lock device * Types of lock screw block: A ... With hexagonal lock screw blocks having a No. 4-40UNC inch thread B ... With hexagonal lock screw blocks having an M2.6 thread F ... Without lock screw blocks, but with grounding adapters having an No.4-40UNC inch thread G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread H ... Without lock screw blocks, but with grounding adapters having an M3 thread J ... With hexagonal lock screw block having an M3 thread * Finish Blank ... Gold-plated(flash) 13 ... 0.4micron(16micro-inch)gold-plated 12 ... 0.2micron(8micro-inch)gold-plated 14 ... 0.76micron(30micro-inch)gold-plated 90 ... Tin-plated * Spring lock devices Blank...Without spring lock devices S or S1...With spring lock devices Note: 1. In the J Series, the number of circuits is determined by the shell size: 9 circuits for E and 25 circuits for B. 2. Contact JST for special plating requirements. 3. Contact JST for the dimensions between the flange and solder tail other than those listed above. 4. Grounding adapters that can secure printed circuit boards are also available. Type B Type F Type G Type H Without lock screw blocks With hexagonal lock F, G, H: Grounding adapters have a thread (*1) for securing separatelyscrew blocks purchased lock screw blocks (*2) (H: 6.3mm(.248")) having an M2.6 thread *1: No.4-40UNC inch *1: M2.6 thread *1: M3 thread thread *2: Model number *2: Model number *2: Model number SFS-2.6S-( )1W(M) SFS-3S-( )1W(M) SFS-4S-( )1W(M) M2.6 No.4-40UNC 3B M2.6 3F M3 3G Type J With hexagonal lock screw blocks (H: 6.3mm (.248")) having an M3 thread M3 3H 3J 525 D SUBMINIATURE CONNECTOR J SERIES H 12.55(.494) A 2.84(.112) 7.9(.311) B C D 2.7 (.106) 6.18 6.0 3.2 (.243) (.236) (.126) [15.38(.606)] H 2.84(.112) 10 7.6(.300) Type A 0.5(.020) Straight through-hole receptacle 2.7 (.106) D H 2.7 (.106) D 6.0 6.0 6.18 (.236) 3.2 (.243) 9.0(.354) (.126) [18.38(.724)] 6.18 (.236) (.243) 12.0(.472) [21.38(.724)] 3.2 (.126) H: Height of the lock screw block (for Types A, B & J) Model No. Dimension between Cir- flange and solder tail Gold-plated (flash) Gold-plated cuits mm(in.) 0.76micron(30micro-inch) receptacle 9 25 Dimensions mm(in.) Tin-plated 6(.236) JES- 9S-2A** JES- 9S-2A**14 - 9(.354) JES- 9S-3A** JES- 9S-3A**14 - 12(.472) JES- 9S-4A** JES- 9S-4A**14 - 6(.236) JBS-25S-2A** JBS-25S-2A**14 JBS-25S-2A**90 9(.354) JBS-25S-3A** JBS-25S-3A**14 JBS-25S-3A**90 12(.472) JBS-25S-4A** JBS-25S-4A**14 - A B C D Q'ty / box 16.34 (.643) 24.99 (.984) 30.8 (1.213) 2.4 (.094) 100 38.38 47.04 (1.511) (1.852) 53.0 (2.087) 2.5 (.098) 40 Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a goldplated (flash) receptacle with hexagonal lock screw blocks having a No. 4-40UNC inch thread and without grounding adapters whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JES-9S-2A3A. 6 mm (.236") type With grounding adapters with a spring lock device 9 mm (.354") type With hexagonal lock screw blocks (H: 6.3mm (.248")) having a No.4-40UNC inch thread No.4-40UNC 12mm (.472") type 3A PC board layout ---------------------------------------------------------- + 9---1.0 00.1 + (.039 0.004 )dia. 5.49 0.05 (.216 .002) 2.74 0.05(.108 .002) 2---3.05 0.05 (.120 .002)dia. 1.37 0.05 (.054 .002) 4.11 0.05 (.162 .002) 24.99 0.05(.984 .002) 526 + 25---1.0 00.1 + (.039 0.004)dia. 2---3.05 0.05 (.120 .002)dia. 2.77 0.05 (.109 .002) 16.56 0.05(.652 .002) 13.82 0.05(.544 .002) 11.05 0.05(.435 .002) 8.28 0.05(.326 .002) 5.54 0.05(.218 .002) 1.40 0.05(.055 .002) 4.14 0.05 6.91 0.05(.272 .002) (.163 .002) 9.68 0.05(.381 .002) 12.42 0.05(.489 .002) 15.19 0.05(.598 .002) 47.04 0.05(1.852 .002) 2.84 0.05 (.112 .002) (25- circuits) 2.84 0.05 (.112 .002) (9-circuits) D Type B Type F SUBMINIATURE CONNECTOR J SERIES Type G Type J Type H Without lock screw blocks With hexagonal lock F, G, H: Grounding adapters have a thread (*1) for securing separatelyscrew blocks purchased lock screw blocks (*2) (H: 6.3mm (.248")) having an M2.6 thread *1: No.4-40UNC inch *1: M2.6 thread *1: M3 thread thread *2: Model number *2: Model number *2: Model number SFS-2.6S-( )1W(M) SFS-3S-( )1W(M) SFS-4S-( )1W(M) M2.6 No.4-40UNC 3B M3 M2.6 3F With hexagonal lock screw blocks (H: 6.3mm (.248")) having an M3 thread M3 3G 3H 3J Panel layout-------------------------------------------------------------- A B C 2---3.2 0.1 (.126 .004)dia. 4---1.6R 10 Circuits A 0.15(.006) B 0.2( .008) C 0.2( .008) 9 24.99( .984) 20.6( .811) 12.0(.472) 25 47.04(1.852) 42.6(1.677) 12.0(.472) 527 DSUBMINIATURE CONNECTOR J SERIES D-sub J Crimp style plug and receptacle CRIMP STYLE PLUG AND RECEPTACLE --------------------------------- 01 Pin contact Socket contact Crimp style plug Crimp style receptacle Features --------------------------------------------------------- * The contacts of this plug are formed by high-speed stamping presses into continuous strips that can be automatically fed into our compact crimping machines. Much less time is required to assemble CRT and RS-232C round cables using this plug than when soldering connections. * The dimples in the connector shell provide the ground connection and are important factors in preventing electromagnetic interference. The contact has a lance that can be visually checked during assembly. This assures accurate assembly and reduces defects. * The contacts in this connector are selectively gold-plated. Moreover, JST's advanced technological knowledge and experience are fully utilized to significantly reduce production costs. Specifications ----------------------------------------------------- Materials Connector Model number identification Part name Material and Finish Contact J -- S Pin contact Brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Insulator Glass-filled PBT, UL94V-0, black * Type of contact: P ... Pin contact, S ... Socket contact Shell Mild steel, copper-undercoated, tin/lead-plated * Applicable wire: 1 ... AWG #24 to #20, 2 ... AWG #28 to #24 Socket contact Phosphor bronze, nickel-undercoated, selective gold-plated Insulator Glass-filled PBT, UL94-0, black * Finish 40 ... Gold-plated (flash) 43 ... 0.4micron(16micro-inch)gold-plated 90 ... Tin-plated Shell Mild steel, copper-undercoated, tin/lead-plated Note: Contact JST for special plating requirements. * Series name P 2 1 40 * Product shape: S ... Chain, B ... Loose piece Plug * Material: 1 ... Brass(Pin contact), 3 ... Phosphor bronze(Socket contact) Receptacle 42 ... 0.2micron(8micro-inch) gold-plated 44 ... 0.76micron(30micro-inch) gold-plated Housing Characteristics * Series name J 3A, AC, DC (2A for 37-circuits)(AWG #20) Voltage rating 250V AC, DC * Wire connection style: C ... crimp style Temperature range -40C to +85C (including temperature rise in * Number of circuits: 9, 15, 25, 37 Contact resistance Initial value/15m max. After environmental testing/30m max. Insulation resistance 5,000M min. Withstanding voltage 1,000V AC/minute Note: Contact JST for details. -- 9 P * Connector style: P ... Plug, S ... Receptacle Note: The relationship between number of circuits and shell size is shown below. 9: E, 15: A, 25: B, 37: C Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 528 C * Shell size: E, A, B ,C Current rating applying electrical current) E D J SERIES SUBMINIATURE CONNECTOR Pin contact (for plug housing) --------- Socket contact (for receptacle housing) --- 15.3(.602) 1.9(.075) 1.9(.075) 16.3(.642) 3.6(.142) 4.25(.167) 3.6(.142) 1.4(.055) 1.0(.039) 5.8(.228) Model No. Applicable wire Pin contact Socket contact Qty / reel AWG # lnsulation O.D. mm(in.) *J-SS1340 #24 to #20 1.1 to1.8mm(.043" to .071") J-SS2340 #28 to #24 0.9 to1.3mm(.035" to .051") Gold-plated Tin-plated Gold-plated *J-SP1140 *J-SP1190 J-SP2140 J-SP2190 10,000 Note: Models marked * are not CSA certified. 10 Model No. 7.0(.276) 2.84(.112) 8.35(.329) 12.55(.494) B C 5.95 (.234) [10.8(.425)] B C Dimensions mm(in.) A B 3.05 (.120)dia. A [10.7(.421)] C Qty / box Circuits Model No. [10.7(.421)] 7.0(.276) 3.05 (.120)dia. A 2.84(.112) 7.9(.311) 10 Circuits Receptacle housing ------------------ 12.55(.494) Plug housing ----------------------- 6.18 (.243) [10.9(.429)] Dimensions mm(in.) A B C Qty / box 9 JEC- 9P 16.92( .666) 24.99( .984) 30.80(1.213) 100 9 JEC- 9S 16.34( .643) 24.99( .984) 30.80(1.213) 100 15 JAC-15P 25.25( .994) 33.32(1.312) 39.14(1.541) 100 15 JAC-15S 24.67( .971) 33.33(1.312) 39.14(1.541) 100 25 JBC-25P 38.97(1.534) 47.04(1.852) 53.04(2.088) 50 25 JBC-25S 38.38(1.511) 47.04(1.852) 53.04(2.088) 50 37 JCC-37P 55.43(2.182) 63.50(2.500) 69.32(2.729) 50 Applicator for the semi-automatic press AP-K2N ------------------------------- Contact J-SP1*** J-SS1*** J-SP2*** J-SS2*** Crimp applicator MKS-L with safety cover without safety cover Compact crimp applicator MKS-LS with safety cover without safety cover Strip-crimp applicator MKS-SC with safety cover APLMK J-SP/SS1 APLNC J-SP/SS1 - - APLSC J-SP/SS1 APLMK J-SP/SS1 APLNC J-SP/SS1 - - APLSC J-SP/SS1 APLMK J-SP/SS2 APLNC J-SP/SS2 - - APLSC J-SP/SS2 APLMK J-SP/SS2 APLNC J-SP/SS2 - - APLSC J-SP/SS2 529