514
Part name Material and Finish
Current rating
Voltage rating
Temperature range
Contact resistance
Insulation resistance
Withstanding voltage
Connector
Plug
Receptacle
Contact
Insulator
Shell
Contact
Insulator
Shell
Brass, nickel-undercoated, selective gold-plated or
copper-undercoated, tin-plated
Glass-filled PBT, UL94V-0, black
Mild steel, copper-undercoated, tin/lead-plated
Phosphor bronze, nickel-undercoated, selective
gold-plated or copper-undercoated, tin-plated
Glass-filled PBT, UL94V-0, black
Mild steel, copper-undercoated, tin/lead-plated
3A, AC, DC (2A for 37-circuits)
250V AC, DC
-
40˚C to
+
85˚C (including temperature rise in
applying electrical current)
Initial value/15mΩ max.
After environmental testing/30mΩ max.
5,000MΩ min.
1,000V AC/minute
D
SUBMINIATURE CONNECTOR
J
SERIES
Solder pot plug and receptacle
D-sub J
Solder pot plug
SOLDER POT PLUG AND RECEPTACLE –––––––––––––––––––––––––––––––––01
Specifications–––––––––––––––––––––––––––––––––––––––––––––––––––––
• Series name
• Shell size: E, A, B ,C
• Wire connection style:
Z ... Solder pot type
• Number of circuits: 9, 15, 25, 37
• Connector style: P ... Plug, S ... Receptacle
• Finish
Blank ... Gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated
13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated
90 ... Tin-plated
JEZ 9P 12——
Solder pot Receptacle
• The receptacle contacts are formed by high-speed stamping
presses to obtain the advantages of cold working. They are
therefore highly elastic, which in turn ensures reliable connection
even after many mating cycles.
• The dimples in the plug shell ensure continuity between it and the
receptacle shell, thus providing complete shielding.
• Costs are kept low by selective gold plating the contacts.
• The solder cup portions of the contacts are tin-plated for easy
soldering.
• Insulator housings are made of a heat-resistant glass-filled PBT
resin.
Features –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Note: 1. The relationship between number of circuits and shell size is shown
below.
9: E, 15: A, 25: B, 37: C
2. Contact JST for special plating requirements.
Note: Contact JST for details.
Model number identification
Materials
Characteristics
Standards ––––––––––––––––––––––
0Recognized E603891Certified LR20812
515
Plug ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
B
C
A3.05(.120)dia.
12.55(.494)
8.35(.329)
10°
[10.72(.422)]
[5.95(.234)]
2.84(.112)
Q´ty / box
Circuits Model No.
Gold-plated Tin-plated A B C
Dimensions mm(in.)
9
15
25
37
JEZ- 9P
JAZ-15P
JBZ-25P
JCZ-37P
JEZ- 9P-90
JAZ-15P-90
JBZ-25P-90
JCZ-37P-90
16.92( .666)
25.25( .994)
38.97(1.534)
55.43(2.182)
24.99( .984)
33.32(1.321)
47.04(1.852)
63.50(2.500)
30.80(1.213)
39.14(1.541)
53.04(2.088)
69.32(2.729)
100
100
50
50
Receptacle–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
B
C
A3.05(.120)dia.
12.55(.494)
7.9(.311)
[10.9(.429)]
6.18
(.243)
2.84(.112)
10°
Q´ty / box
Circuits Model No.
Gold-plated Tin-plated A B C
Dimensions mm(in.)
9
15
25
37
JEZ- 9S
JAZ-15S
JBZ-25S
JCZ-37S
JEZ- 9S-90
JAZ-15S-90
JBZ-25S-90
JCZ-37S-90
16.34( .643)
24.67( .971)
38.38(1.511)
54.84(2.159)
24.99( .984)
33.33(1.312)
47.04(1.852)
63.50(2.500)
30.80(1.213)
39.14(1.541)
53.04(2.088)
69.32(2.729)
100
100
50
50
D SUBMINIATURE CONNECTOR J SERIES
516
Right angle through-hole plug
(with hexagonal lock screw blocks)
Right angle through-hole receptacle
(with spring lock devices)
RIGHT ANGLE THROUGH-HOLE PLUG AND RECEPTACLE –––––––––––––––––01
Right angle through-hole receptacle
(with rectangular lock screw blocks)
• The receptacle contacts are made by high-speed stamping
presses. This promotes the uniform elasticity of the twin-contact
mating sections and therefore ensures reliable contact even after
repeated mating cycles. The solder tails are U-shaped for extra
strength.
• Costs are minimized by selective gold plating, high speed
stamping presses, and completely automated assembly.
• To ensure complete shielding, a wide variety of grounding
adapters are available so that the receptacles can be grounded to
different kinds of supporting structures.
• Metric, inch or other lock screw blocks are available for fastening
mating plugs.
Features –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
D
SUBMINIATURE CONNECTOR
J
SERIES
Right angle through-hole plug and receptacle
D-sub J
517
Specifications–––––––––––––––––––––––––––––––––––––––––––––––––––––
Part name Material and Finish
Contact of plug
Contact of receptacle
Insulator
Shell
Hexagonal lock screw block
Rectangular lock screw block
Grounding adapter having
a 3.2mm(.126") dia. hole
Grounding adapter having
an M3 tapped hole
Grounding adapter having
a spring lock lever
Brass, nickel-undercoated, selective gold-plated
or copper-undercoated, tin/lead-plated
Phosphor bronze, nickel-undercoated, selective
gold-plated or copper-undercoated, tin/lead-plated
Glass-filled PBT, UL94V-0, black
Mild steel, copper-undercoated, nickel-plated
Mild steel, copper-undercoated, nickel-plated
Zinc, copper-undercoated, nickel-plated
Mild steel, copper-undercoated, nickel-plated
Brass, copper-undercoated, tin/lead-plated
• Series name
• Shell size: E, A, B ,C
• Wire connection style:
Y... Right angle through-hole style
• Number of circuits: 9, 15, 25, 37
• Connector style: P ... Plug, S ... Receptacle
• Connector construction/Dimensions: Standard J series
• Types of grouding adapters
0 ... Without grounding adapters
1 ... With grounding adapters having a 3.2mm(.126") dia. hole
2 ... With grounding adapters having an M3 thread
3 ... With grounding adapters having a spring lock device (1)
4 ... With grounding adapters having a spring lock device (2)
• Types of lock screw blocks
A ... With hexagonal lock screw blocks having a No. 4-40 UNC inch thread
B ... With hexagonal lock screw blocks having an M2.6 thread
C ... With rectangular lock screw blocks having an M2.6 thread
D ... Without lock screw blocks
E ... Without lock screw blocks, but with grounding adapters having a 3.05mm(.120") dia. hole
F ... Without lock screw blocks, but with grounding adapters having a No. 4-40UNC inch thread
G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread
H ... Without lock screw blocks, but with grounding adapters having an M3 thread
• Finish
Blank ... Gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated
13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated
90 ... Tin-plated
JEY 9S
——
1A 3 A 12 S1
• Spring lock devices
Blank...Without spring lock devices
S or S1...With spring lock devices
Model number identification
Materials
Current rating
Voltage rating
Temperature range
Contact resistance
Insulation resistance
Withstanding voltage
Applicable PC board thickness
3A, AC, DC (2.0A AC, DC for 37-circuits)
250V AC, DC
-
40˚C to
+
85˚C (including temperature rise in
applying electrical current)
Initial value/15mΩ max.
After environmental testing/30mΩ max.
5,000MΩ min.
1,000V AC/minute
1.6mm(.063")
Characteristics
Note: Contact JST for details.
Note:
1. The relationship between number of circuits and shell size is shown below.
9: E, 15: A, 25: B, 37: C
2. Contact JST for special plating requirements.
3. Contact JST for the Receptacle with spring lock devices. (Not UL recognized nor CSA certified.)
Standards ––––––––––––––––––––––
0Recognized E603891Certified LR20812
518
D SUBMINIATURE CONNECTOR J SERIES
M2.6
No.4-40UNC
Right angle through-hole plug Type A Type B
Without grounding adapters
With grounding adapters
with a 3.2mm (.126") dia. hole
With grounding adapters
with an M3 thread
With grounding adapters
with a spring lock device (1)
With grounding adapters
with a spring lock device (2)
With hexagonal
lock screw
blocks
(H: 6.3mm (.248"))
having a
No.4-40UNC
inch thread
With hexagonal
lock screw
blocks
(H: 6.3mm (.248"))
having an
M2.6 thread
0A 0B
1A 1B
2A 2B
3A 3B
––
8.35(.329)
[18.6(.732)]
5.95
(.234)
A
B
C
12.55(.494)
3.2
(.126)
0.75
(.030) E
0.6
(.024)
D2.84
(.112)
H
2.84
(.112)
10°
Q'ty /
box
Model No. Dimensions mm(in.)
ABC
tin-plated plug
JEY- 9P-1A**
JAY-15P-1A**
JBY-25P-1A**
JEY- 9P-1A**90
JAY-15P-1A**90
JBY-25P-1A**90
16.90( .665)
25.25( .994)
38.97(1.534)
24.99( .984)
33.33(1.312)
47.04(1.852)
30.80(1.213)
39.14(1.541)
53.00(2.087)
100
60
40
Cir-
cuits
9
15
25
gold-plated plug
Note:
** shows the location where a two-digit code (see the table below for codes) should be entered. For
example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UNC inch
thread and without grounding adapters is required, specify the model number as JEY-9P-1A0A.
H: Height of the lock screw block (for Types A, B & C)
DE
8.1(.319)
8.1(.319)
8.2(.323)
9.52(.375)
9.52(.375)
9.62(.379)
519
M3M2.6No.4-40UNC
3.05mm
(.120")dia. hole
M2.6
Type C Type D Type E Type F Type G Type H
0C 0D
1C 1D
2C 2D
3C 3D
––
––
1E 1F
2E 2F
3E 3F
––
––
1G
–
2G
–
3G
–
–
With rectangular
lock screw blocks
(H: 6.2mm (.244"))
having an M2.6
thread
Without lock screw
blocks
Without lock screw blocks
E: Grounding adapter has no thread.
F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2)
Use a lock screw block
of Model number
JFS-( )S-C1N.
*1: No.4-40UNC inch thread
*2: Model number
JFS-4S-( )1W(M)
*1: M2.6 thread
*2: Model number
JFS-2.6S-( )1W(M)
*1: M3 thread
*2: Model number
JFS-3S-( )1W(M)
4H
520
D SUBMINIATURE CONNECTOR J SERIES
M2.6No.4-40UNC
Right angle through-hole receptacle Type A Type B
Without grounding adapters
With grounding adapters
with a 3.2mm (.126") dia. hole
With grounding adapters
with an M3 thread
With grounding adapters
with a spring lock device (1)
With grounding adapters
with a spring lock device (2)
With hexagonal
lock screw
blocks
(H: 6.3mm (.248"))
having a
No.4-40UNC
inch thread
With hexagonal
lock screw
blocks
(H: 6.3mm (.248"))
having an
M2.6 thread
0A 0B
1A 1B
2A 2B
3A 3B
––
[18.8(.740)]
6.18
(.243)
A
B
C
12.55(.494)
3.2
(.126)
0.7
(.028) E
0.6
(.024)
D2.84
(.112)
H
2.84
(.112)
7.9(.311)
10°
Q'ty /
box
Model No. Dimensions mm(in.)
ABC
tin-plated
receptacle
JEY- 9S-1A**
JAY-15S-1A**
JBY-25S-1A**
JCY-37S-1A**
JEY- 9S-1A**90
JAY-15S-1A**90
JBY-25S-1A**90
JCY-37S-1A**90
16.34( .643)
24.67( .971)
38.38(1.511)
54.84(2.154)
24.99( .984)
33.32(1.312)
47.04(1.852)
63.50(2.500)
30.81(1.213)
39.14(1.541)
53.04(2.088)
69.32(2.729)
100
60
40
40
Cir-
cuits
9
15
25
37
gold-plated
receptacle
Note:
** shows the location where a two-digit code (see the table below for codes) should be entered. For
example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UNC inch
thread and without grounding adapters is required, specify the model number as JEY-9S-1A0A.
H: Height of the lock screw block (for Types A, B & C)
DE
8.1(.319)
8.1(.319)
8.2(.323)
8.2(.323)
9.52(.375)
9.52(.375)
9.62(.379)
9.62(.379)
521
D SUBMINIATURE CONNECTOR J SERIES
M3No.4-40UNC M2.6
3.05mm
(.120")dia. hole
M2.6
Type C Type D Type E Type F Type G Type H
0C 0D
1C 1D
2C 2D
3C 3D
––
––
1E 1F
2E 2F
3E 3F
––
––
1G
–
2G
–
3G
–
–
With rectangular
lock screw blocks
(H: 6.2mm (.244"))
having an M2.6
thread
Without lock screw
blocks
Without lock screw blocks
E: Grounding adapter has no thread.
F, G, H: Grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2)
Used a lock screw block
[model number
JFS-( )S-C1N]
*1: No.4-40UNC inch thread
*2: Model number
JFS-4S-( )1W(M)
*1: M2.6 thread
*2: Model number
JFS-2.6S-( )1W(M)
*1: M3 thread
*2: Model number
JFS-3S-( )1W(M)
4H
522
D SUBMINIATURE CONNECTOR J SERIES
PC board layout (viewed from component side) ––––––––––––––––––––––––––––––––––––
5.49
±
0.05
(.216
±
.002)
2.84
±
0.05
(.112
±
.002)
9.0(.354)
max.
1.37
±
0.05
(.054
±
.002)
4.11 ± 0.05
(.162 ± .002)
24.99 ± 0.15(.984 ± .006)
9---1.0
(.039 )dia.
+0.1
0+.004
0
2.74
±
0.05(.108
±
.002)
PC board edge
2---3.2
±
0.1
(.126
±
.004)dia.
PC board edge
4.11 ± 0.05
(.162 ± .002)
2.84
±
0.05
(.112
±
0.05)
2.74 ± 0.05
(.108 ± .002)
5.49 ± 0.05
(.216 ± .002)
9.0(.354)
max.
33.32 ± 0.15(1.312 ± .006)
2---3.2 ± 0.1
(.126 ± .004)dia.
1.37 ± 0.05(.054 ± .002)
15---1.0
(.039 )dia.
+0.1
+.004
0
0
9.60 ± 0.05
(.378 ± .002)
6.86
±
0.05(.270
±
.002)
8.23 ± 0.05(.324 ± .002)
2.84
±
0.05
(.112
±
.002)
47.04
±
0.15(1.852
±
.006)
1.40
±
0.05(.055
±
.002)
PC board
edge
25---1.0
(.039 )dia.
+0.1
+.004
0
0
16.56
±
0.05(.652
±
.002)
4.14
±
0.05
(.163
±
.002)
13.82
±
0.05(.544
±
.002)
11.05
±
0.05(.435
±
.002)
8.28
±
0.05(.326
±
.002)
5.54
±
0.05(.218
±
.002)
15.19
±
0.05(.598
±
.002)
12.42
±
0.05(.489
±
.002)
9.68
±
0.05(.381
±
.002)
6.91
±
0.05(.272
±
.002)
2.77
±
0.05
(.109
±
.002)
9.0(.354)
max.
2---3.2
(.126
±
.004)dia.
±
0.1
PC board edge
2.84
±
0.05
(.112
±
.002)
9.0(.354)
max.
2---3.2
±
0.1
(.126
±
.004)dia.
37---1.0
(.039 )dia.
+0.1
0+.004
0
19.33
±
0.05(.761
±
.002)
22.10
±
0.05(.870
±
.002)
24.84
±
0.05(.978
±
.002)
63.50
±
0.15(2.500
±
.006)
23.47
±
0.05(.924
±
.002)
20.70
±
0.05(.815
±
.002)
1.40
±
0.05
(.055
±
.002)
4.14
±
0.05
(.163
±
.002)
17.96
±
0.05(.707
±
.002)
15.19
±
0.05(.598
±
.002)
12.42
±
0.05(.489
±
.002)
9.68
±
0.05(.381
±
.002)
6.91
±
0.05(.272
±
.002)
2.77
±
0.05
(.109
±
.002)
16.56
±
0.05(.652
±
.002)
13.82
±
0.05(.544
±
.002)
11.05
±
0.05(.435
±
.002)
8.28
±
0.05(.326
±
.002)
5.54 ± 0.05(.218
±
.002)
(9 circuits) (15 circuits)
(25 circuits) (37 circuits)
Panel layout––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
The connector can be mounted either on the front side or on the rear side of
the panel as shown above.
Use M2.5 or M2.6 screws for installation.
Mounting
on the rear side Mounting
on the front side
B
10°
C
A
4---1.6R
2---3.2
±
0.1
(.126
±
.004)dia.
523
D
SUBMINIATURE CONNECTOR
J
SERIES
Straight through-hole plug and receptacle
D-sub J
Straight through-hole plug
(with hexagonal lock screw blocks)
STRAIGHT THROUGH-HOLE PLUG AND RECEPTACLE–––––––––––––––––––––01
Straight through-hole receptacle (without lock screw blocks, but
with grounding adapters having a No.4-40UNC inch thread)
• Three standard types are available with different dimensions
between the flange and solder tail: 6mm (.236"), 9mm (.354"), and
12mm (.472").
• The roots of the contact leads are covered to prevent flux from
rising into the connector during soldering.
• A grounding adapter with a spring lock device allows the
connector to be temporarily secured onto the printed circuit board
so that the connector can be soldered easily.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
Features –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
6.0
(.236)
9.0
(.354)
12.0
(.472)
524
D SUBMINIATURE CONNECTOR J SERIES
Part name Material and Finish
Contact
Insulator
Shell
Heaxagonal lock screw bock
Grounding adapter
with spring lock device
Plug
Receptacle
Brass, nickel-undercoated, selective gold-plated
Phosphor bronze, nickel-undercoated, selective
gold-plated
Glass-filled PBT, UL94V-0, black
Mild steel, copper-undercoated, nickel-plated
Mild steel, copper-undercoated, nickel-plated
Brass, copper-undercoated, tin/lead-plated
Current rating
Voltage rating
Temperature range
Contact resistance
Insulation resistance
Withstanding voltage
Applicable PC board thickness
3.0A AC, DC
250V AC, DC
-40˚C to +85˚C (including temperature rise in
applying electrical current)
Initial value/15mΩ max.
After environmental testing/30mΩ max.
5,000MΩ min.
1,000V AC/minute
1.6mm(.063")
Specifications–––––––––––––––––––––––––––––––––––––––––––––––––––––
Materials Characteristics
*Contact JST for details.
No.4-40UNC
3A
With hexagonal lock
screw blocks
(H: 6.3mm (.248"))
having a No.4-40UNC
inch thread
Type AStraight through-hole plug
With grounding adapters
with a spring lock device 6 mm (.236") type 9 mm (.354") type 12mm (.472") type
A
B
C
H
6.0
(.236) 9.0
(.354)
5.95
(.234)
3.5
(.138) 2.7
(.106)
12.55(.494)
8.35(.329)
[15.04(.592)]
7.6(.300)
2.84(.112)
H
12.0
(.472)
H
2.84(.112)
3.2
(.126)
0.5(.020)
2.7
(.106)
DD 3.5
(.138)
5.95
(.234) 3.2
(.126)
[21.04(.828)]
2.7
(.106)
3.5
(.138)
5.95
(.234)
[18.04(.710)]
3.2
(.126)
10°
Note:
**
shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a gold-plated
(flash) receptacle with hexagonal lock screw blocks having a No. 4-40UNC inch thread and without grounding adapters whose
dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JBS-25P-2A3A.
DDD
Q'ty /
box
Model No.
100
Cir-
cuits
9
H: Height of the lock screw block (for Types A, B & J)
Gold-plated (flash)
Plug
Dimension between
flange and solder tail
mm(in.)
JES- 9P-2A**
JES- 9P-3A**
JES- 9P-4A**
6 (.236)
9 (.354)
12 (.472)
25 JBS-25P-2A**
JBS-25P-3A**
JBS-25P-4A**
6 (.236)
9 (.354)
12 (.472)
Gold-plated
0.76micron(30micro-inch)
JES- 9P-2A**14
JES- 9P-3A**14
JES- 9P-4A**14
JBS-25P-2A**14
JBS-25P-3A**14
JBS-25P-4A**14
40
ABCD
Dimensions mm(in.)
16.90
(.665) 24.99
(.984) 30.8
(1.213) 2.4
(.094)
38.97
(1.534) 47.04
(1.852) 53.0
(2.087) 2.5
(.098)
525
• Series name
• Shell size: B, E
• Wire connection type:
S ... Straight through-hole type
• Number of circuits: 9, 25
• Connector type: P ... Plug S ... Receptacle
• Connector construction/dimensions:
2A ... 6 mm (.236") from flange to solder tail
3A ... 9 mm (.354") from flange to solder tail
4A ... 12mm (.472") from flange to solder tail
• Types of grouding adapter:
3 ... Grounding adapter with a spring lock device
• Types of lock screw block:
A ... With hexagonal lock screw blocks having a No. 4-40UNC inch thread
B ... With hexagonal lock screw blocks having an M2.6 thread
F ... Without lock screw blocks, but with grounding adapters having an No.4-40UNC inch thread
G ... Without lock screw blocks, but with grounding adapters having an M2.6 thread
H ... Without lock screw blocks, but with grounding adapters having an M3 thread
J ... With hexagonal lock screw block having an M3 thread
• Finish
Blank ... Gold-plated(flash) 12 ... 0.2micron(8micro-inch)gold-plated
13 ... 0.4micron(16micro-inch)gold-plated 14 ... 0.76micron(30micro-inch)gold-plated 90 ... Tin-plated
—
JBS25 —
P2A3 F14S1
• Spring lock devices
Blank...Without spring lock devices
S or S1...With spring lock devices
Note:
1. In the J Series, the number of circuits is determined by the shell size: 9 circuits for E and 25 circuits for B.
2. Contact JST for special plating requirements.
3. Contact JST for the dimensions between the flange and solder tail other than those listed above.
4. Grounding adapters that can secure printed circuit boards are also available.
Model number identification
D SUBMINIATURE CONNECTOR J SERIES
M3M3M2.6No.4-40UNCM2.6
Type B
Without lock screw blocks
F, G, H: Grounding adapters have a thread (*1) for securing separately-
purchased lock screw blocks (*2)
Type F Type G Type H Type J
With hexagonal lock
screw blocks
(H: 6.3mm(.248"))
having an M2.6 thread *1: No.4-40UNC inch
thread
*2: Model number
SFS-4S-( )1W(M)
*1: M2.6 thread
*2: Model number
SFS-2.6S-( )1W(M)
*1: M3 thread
*2: Model number
SFS-3S-( )1W(M)
With hexagonal lock
screw blocks
(H: 6.3mm (.248"))
having an M3 thread
3B 3F 3G 3H 3J
526
D SUBMINIATURE CONNECTOR J SERIES
3A
With hexagonal lock
screw blocks
(H: 6.3mm (.248"))
having a No.4-40UNC
inch thread
Type AStraight through-hole receptacle
With grounding adapters
with a spring lock device 6 mm (.236") type 9 mm (.354") type 12mm (.472") type
No.4-40UNC
A
B
C
D
6.0
(.236)
6.18
(.243)
2.7
(.106)
12.55(.494)
7.9(.311)
[15.38(.606)]
7.6(.300)
2.84(.112)
2.84(.112)
3.2
(.126)
0.5(.020)
2.7
(.106)
[21.38(.724)]
2.7
(.106)
[18.38(.724)]
HDHDH
6.18
(.243) 6.18
(.243)
9.0(.354) 12.0(.472)
6.0
(.236) 6.0
(.236) 3.2
(.126)
3.2
(.126)
10°
Cir-
cuits
Dimension between
flange and solder tail
mm(in.)
Model No.
Gold-plated (flash)
receptacle Gold-plated
0.76micron(30micro-inch)
Dimensions mm(in.)
ABCD
Q'ty /
box
9
25
6(.236)
9(.354)
12(.472)
6(.236)
9(.354)
12(.472)
JES- 9S-2A**
JES- 9S-3A**
JES- 9S-4A**
JBS-25S-2A**
JBS-25S-3A**
JBS-25S-4A**
Tin-plated
-
-
-
JBS-25S-2A**90
JBS-25S-3A**90
-
JES- 9S-2A**14
JES- 9S-3A**14
JES- 9S-4A**14
JBS-25S-2A**14
JBS-25S-3A**14
JBS-25S-4A**14
16.34
(.643)
38.38
(1.511)
24.99
(.984)
47.04
(1.852)
30.8
(1.213)
53.0
(2.087)
2.4
(.094)
2.5
(.098) 40
H: Height of the lock screw block (for Types A, B & J)
Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a gold-
plated (flash) receptacle with hexagonal lock screw blocks having a No. 4-40UNC inch thread and without grounding adapters
whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JES-9S-2A3A.
100
PC board layout ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(9-circuits) (25- circuits)
5.49
±
0.05
(.216
±
.002)
2.84
±
0.05
(.112
±
.002)
1.37 ± 0.05
(.054 ± .002)
4.11
±
0.05
(.162
±
.002)
24.99
±
0.05(.984
±
.002)
2---3.05
±
0.05
(.120 ± .002)dia.
9---1.0
(.039 )dia.
+0.1
0+.004
0
2.74
±
0.05(.108
±
.002)
2.84
±
0.05
(.112
±
.002)
47.04
±
0.05(1.852
±
.002)
2---3.05
±
0.05
(.120
±
.002)dia. 1.40
±
0.05(.055
±
.002)
25---1.0
(.039 )dia.
+0.1
+.004
0
0
16.56
±
0.05(.652
±
.002)
4.14
±
0.05
(.163
±
.002)
13.82
±
0.05(.544
±
.002)
11.05
±
0.05(.435
±
.002)
8.28
±
0.05(.326
±
.002)
5.54
±
0.05(.218
±
.002)
15.19
±
0.05(.598
±
.002)
12.42
±
0.05(.489
±
.002)
9.68
±
0.05(.381
±
.002)
6.91
±
0.05(.272
±
.002)
2.77
±
0.05
(.109
±
.002)
527
Panel layout––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
B
10°
C
A
4---1.6R
2---3.2
±
0.1
(.126
±
.004)dia.
Circuits A ± 0.15(±.006) B± 0.2(± .008) C± 0.2(± .008)
9
25
24.99( .984)
47.04(1.852)
20.6( .811)
42.6(1.677)
12.0(.472)
12.0(.472)
D SUBMINIATURE CONNECTOR J SERIES
Type B
Without lock screw blocks
F, G, H: Grounding adapters have a thread (*1) for securing separately-
purchased lock screw blocks (*2)
Type F Type G Type H Type J
With hexagonal lock
screw blocks
(H: 6.3mm (.248"))
having an M2.6 thread *1: No.4-40UNC inch
thread
*2: Model number
SFS-4S-( )1W(M)
*1: M2.6 thread
*2: Model number
SFS-2.6S-( )1W(M)
*1: M3 thread
*2: Model number
SFS-3S-( )1W(M)
With hexagonal lock
screw blocks
(H: 6.3mm (.248"))
having an M3 thread
3B 3F 3G 3H 3J
M2.6 No.4-40UNC M2.6 M3 M3
528
D
SUBMINIATURE CONNECTOR
J
SERIES
Crimp style plug and receptacle
D-sub J
Connector Material and FinishPart name
Plug
Receptacle
Pin
contact
Insulator
Shell
Socket
contact
Insulator
Shell
Brass, nickel-undercoated, selective
gold-plated or copper-undercoated, tin-plated
Glass-filled PBT, UL94V-0, black
Mild steel, copper-undercoated, tin/lead-plated
Phosphor bronze, nickel-undercoated,
selective gold-plated
Glass-filled PBT, UL94-0, black
Mild steel, copper-undercoated, tin/lead-plated
Pin contact
CRIMP STYLE PLUG AND RECEPTACLE–––––––––––––––––––––––––––––––––01
Specifications–––––––––––––––––––––––––––––––––––––––––––––––––––––
Contact
• Series name
• Product shape: S ... Chain, B ... Loose piece
• Type of contact: P ... Pin contact, S ... Socket contact
• Applicable wire: 1 ... AWG #24 to #20, 2 ... AWG #28 to #24
• Material: 1 ... Brass(Pin contact), 3 ... Phosphor bronze(Socket contact)
• Finish
40 ... Gold-plated (flash) 42 ... 0.2micron(8micro-inch) gold-plated
43 ... 0.4micron(16micro-inch)gold-plated 44 ... 0.76micron(30micro-inch) gold-plated
90 ... Tin-plated
Note: Contact JST for special plating requirements.
Housing
• Series name
• Shell size: E, A, B ,C
• Wire connection style: C ... crimp style
• Number of circuits: 9, 15, 25, 37
• Connector style: P ... Plug, S ... Receptacle
Note: The relationship between number of circuits and shell size is shown below.
9: E, 15: A, 25: B, 37: C
P—1240SJ
—
J E C 9 P
Socket contact
• The contacts of this plug are formed by high-speed stamping
presses into continuous strips that can be automatically fed into
our compact crimping machines. Much less time is required to
assemble CRT and RS-232C round cables using this plug than
when soldering connections.
• The contacts in this connector are selectively gold-plated.
Moreover, JST's advanced technological knowledge and
experience are fully utilized to significantly reduce production
costs.
• The dimples in the connector shell provide the ground connection
and are important factors in preventing electromagnetic
interference. The contact has a lance that can be visually
checked during assembly. This assures accurate assembly and
reduces defects.
Features –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Note: Contact JST for details.
Model number identification
Materials
Characteristics
Crimp style plug Crimp style receptacle
Current rating
Voltage rating
Temperature range
Contact resistance
Insulation resistance
Withstanding voltage
3A, AC, DC (2A for 37-circuits)(AWG #20)
250V AC, DC
-40˚C to +85˚C (including temperature rise in
applying electrical current)
Initial value/15mΩ max.
After environmental testing/30mΩ max.
5,000MΩ min.
1,000V AC/minute
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
529
Pin contact (for plug housing) –––––––––
16.3(.642)
5.8(.228) 3.6(.142)
1.0(.039) 1.9(.075)
Q´ty / reel
Model No.
Pin contact Applicable wire
Socket contact
Gold-plated Tin-plated Gold-plated AWG # lnsulation O.D.
mm(in.)
*J-SP1140
J-SP2140
*J-SP1190
J-SP2190
*J-SS1340
J-SS2340
#24 to #20
#28 to #24
1.1 to1.8mm(.043" to .071")
0.9 to1.3mm(.035" to .051") 10,000
Socket contact
(for receptacle housing)
–––
15.3(.602)
4.25(.167) 3.6(.142)
1.4(.055) 1.9(.075)
Note: Models marked * are not CSA certified.
Plug housing –––––––––––––––––––––––
B
C
A
[10.8(.425)]
[10.7(.421)]
12.55(.494)
3.05
(.120)dia.
2.84(.112)
8.35(.329)
7.0(.276)
10°
5.95
(.234)
Receptacle housing ––––––––––––––––––
B
C
A
6.18
(.243)
[10.9(.429)]
[10.7(.421)]
12.55(.494)
3.05
(.120)dia.
2.84(.112)
7.9(.311)
7.0(.276)
10°
Cir-
cuits ABC
Dimensions mm(in.)
9
15
25
37
16.92( .666)
25.25( .994)
38.97(1.534)
55.43(2.182)
24.99( .984)
33.32(1.312)
47.04(1.852)
63.50(2.500)
30.80(1.213)
39.14(1.541)
53.04(2.088)
69.32(2.729)
16.34( .643)
24.67( .971)
38.38(1.511)
24.99( .984)
33.33(1.312)
47.04(1.852)
30.80(1.213)
39.14(1.541)
53.04(2.088)
9
15
25
JEC- 9S
JAC-15S
JBC-25S
100
100
50
Model No. Q´ty /
box
JEC- 9P
JAC-15P
JBC-25P
JCC-37P
100
100
50
50
Cir-
cuits ABC
Dimensions mm(in.)
Model No. Q´ty /
box
D SUBMINIATURE CONNECTOR J SERIES
Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
J-SP1*** APLMK J-SP/SS1 APLNC J-SP/SS1 ––APLSC J-SP/SS1
J-SS1*** APLMK J-SP/SS1 APLNC J-SP/SS1 ––APLSC J-SP/SS1
J-SP2*** APLMK J-SP/SS2 APLNC J-SP/SS2 ––APLSC J-SP/SS2
J-SS2*** APLMK J-SP/SS2 APLNC J-SP/SS2 ––APLSC J-SP/SS2