IHB100T480512 - C&D Technologies, Inc.

100 Watt Triple Output Half Brick DC/DC Converter

IHB100T

33 - 75V Input Range

Each Channel Independently

Current Limited

High Efficiency: 88% Typical

1500VDC Isolation Between

Input and Output

Operation to 100°C Baseplate

Temperature

50µS Transient Recovery,

0-90% Load Step

Primary & Secondary Remote

On/Off

IHB100T Series Approved to

UL/CUL 1950, EN60950

The IHB100T series triple output standard half brick modules are designed

for today’s demanding industrial applications. Available in two wide range

inputs, these isolated converters offer many features in the standard models.

With a complement of saf ety agency approvals and low noise operations, the

converters respond extremely fast to change in load conditions. Inherent in

the design are very well-controlled output voltage and minimal need for

minimum loading on main (V1) output.

EFFICIENCY vs TEMPERATURE

Change in Efficiency (%)

Case Temperature (°C)

TCASE = +40°C, nominal input voltage, nominal load, recommended external

components applied, unless otherwise specified.*

INPUT

VOLTAGE RATED VOUT (VDC) RATED MAXIMUM IOUT (A)

MODEL (VDC) V1 (±) V2 (±) V3 (±) V1(±) V2(±) V3(±)

IHB100T480312 48 (33-75) 3.3 12 12 30 4.2 4.2

IHB100T480315 48 (33-75) 3.3 15 15 30 3.4 3.4

IHB100T480512 48 (33-75) 5.1 12 12 20 4.2 4.2

IHB100T480515 48 (33-75) 5.0 15 15 20 2.0 2.0

PRODUCT SELECTION CHART

Output Short-Circuit

Duration Continuous

Baseplate Temperature +100°C

Lead Temperature

(soldering, 10 seconds max) +300°C

Storage Temperature +125°C

Input to Output Isolation 1500 VDC

ABSOLUTE MAX.

RATINGS

Corporate: www.cdtechno.com

Product: www.cdpowerelectronics.com

IHB100T REV A 10/01

Product: www.cdpowerelectronics.com

SPECIFICATIONS, ALL MODELS

Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified.

INPUT

PARAMETER CONDITIONS MIN TYP MAX UNITS

Voltage Range 33 48 75 VDC

Reflected Ripple Current Peak - Peak 370 mA

Input Ripple Rejection DC to 1KHz 50 60 dB

Maximum Input Current Output Power = 100W

VIN = 30V 5 A

No Load Power Dissipation POUT = 0, VIN, Min<VIN<VIN, Max 6W

Inrush Charge 0.247 mC

Quiescent Operating Current

Primary On/Off Disabled 7.5 10 mA

Secondary On/Off Disabled 15 20 mA

See Regulation Curves

* See Application Notes available on the web at www.cdpowerelectronics.com

IHB100T480312 OUTPUT

PARAMETER CONDITIONS MIN TYP MAX UNITS

ISOLATION

Input to Each Output Peak Test 150 0 VDC

Input to Baseplate 150 0 VDC

Channel to Channel Any Channel to Any Channel 500 VDC

Resistance, Input - Output 10 MΩ

Capacitance, Input - Output 2000 pF

Leakage Current VISO = 240VAC, 60Hz 180 µA, rms

GENERAL

Set Point Accuracy VIN = Nominal, 50% Load 1 %

Turn-on Time Within 1% of Nominal VOUT 3.5 5 mSec

Remote On/Off Control Inputs

Primary Open Collector/Drain

Sink Current-Logic Low VIN = VMAX 7mA

Vlow 0.8 V

Vhigh Open Collector

Secondary Open Collector/Drain

Sink Current-Logic Low 100 µA

Vlow 0.4 V

Vhigh Open Collector

External Synchronization Input

Frequency 440 520 KHz

Pulse Width 150 320 nSec

Source Impedence 47 Ω

Input High Voltage 4 5 V

Input Low Voltage 0 1 V

Input Impedance 470 Ω

Switching Frequency 470 480 490 KHz

Weight 3 (85) oz (g)

TEMPERATURE Case Temperature

Operation/Specification -40 +100 °C

Storage -55 +125 °C

Shutdown +100 +115 °C

Thermal Inpedance Case to Ambient 8.2 °C/W

GENERAL

V1 V2 V3 UNITS

PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max

Output Power Total Combined O/P Power =

100 Watts Max 50 100 2 5 50 25 50 W

Set Point Voltage IO Nom 3.3 12.2 12.2 V

Output Current, IOUT 0.5 15 30.0 0 2.1 4.2 0 2.1 4.2 A

Output Ripple, p-p DC to 20MHz*100 200 150 500 150 500 mV

Output Adjust Range *3.15 3.80 Dependent on V1 V

Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C

Line Regulation VIN, Min≤VIN≤VIN, Max

IO = IO, Nom 0.05 0.10 1.0 2.0 1.0 2.0 %

Load Regulation Min Load to Rated Load 0.50 1.00 %

Current Limit Inception Other Outputs Min Load 38 6.0 6.0 A

Short-Circuit Current 30 38 5.0 6.0 5.0 6.0 A

Transient Response 50 to 100% Load Step

Peak Deviation 150 250 mV

Settling Time VOUT, 1% of VOUT, Nom 35 50 µSec

Overvoltage Limit 4.2 5.0 V

Efficiency IOUT1=15A, (IOUT2+IOUT3)= 4.2A 85 86 %

F.L. VIN=Nominal

IHB100T REV A 10/01

Product: www.cdpowerelectronics.com

SPECIFICATIONS, ALL MODELS

Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified.

See Regulation Curves

IHB100T480315 OUTPUT

See Regulation CurvesSee Regulation Curves

IHB100T480515 OUTPUT

* See Application Notes available on the web at www.cdpowerelectronics.com

V1 V2 V3 UNITS

PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max

Output Power Total Combined O/P Power =

100 Watts Maximum 50 100 2 5 50 25 50 W

Set Point Voltage IO Nom 3.3 15.85 15.85 V

Output Current, IOUT 0.5 15 30.0 0 1.66 3.33 0 1.66 3.33 A

Output Ripple, p-p DC to 20MHz* 100 200 125 500 1 25 500 mV

Output Adjust Range * 3.15 3.80 Dependent on V1 V

Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C

Line Regulation VIN, Min≤VIN≤VIN, Max

IO = IO, Nom 0.05 0.10 1.0 2.0 1.0 2.0 %

Load Regulation Min Load to Rated Load 0.50 1.0 %

Current Limit Inception Other Outputs Min Load 38 5.0 5 .0 A

Short-Circuit Current 30 38 4.0 5.0 4.0 5.0 A

Transient Response 50 to 100% Load Step

Peak Deviation 150 250 mV

Settling Time VOUT, 1% of VOUT, Nom 35 50 µSec

Overvoltage Limit 4.2 5.0 V

Efficiency IOUT1=15A, (IOUT2+IOUT3) = 3.4A 85 86 %

F.L. VIN=Nominal

See Regulation Curves

V1 V2 V3 UNITS

PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max

Output Power Total Combined O/P Power =

100 Watts Combined 50 100 2 5 50 25 50 W

Set Point Voltage IO Nom 5.1 12 12 V

Output Current, IOUT 0.5 10 20 0 2.1 4.2 0 2.1 4.2 A

Output Ripple, p-p DC to 20MHz* 100 15 0 1 50 500 1 50 50 0 mV

Output Adjust Range * 4.75 5.50 Dependent on V1 V

Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C

Line Regulation VIN, Min≤VIN≤VIN, Max

IO = IO, Nom 0.05 0.10 1.0 2.0 1.0 2.0 %

Load Regulation Min Load to Rated Load 0.50 1.0 %

Current Limit Inception Other Outputs Min Load 26.0 6.0 6.0 A

Short-Circuit Current 20.0 26.0 5.0 6.0 5.0 6.0 A

Transient Response 50 to 100% Load Step

Peak Deviation 200 300 mV

Settling Time VOUT, 1% of VOUT, Nom 35 50 µSec

Overvoltage Limit 6.0 7.0 V

Efficiency IOUT1=10A, (IOUT2+IOUT3) = 4.2A 86 87 %

F.L. VIN=Nominal

V1 V2 V3 UNITS

PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max

Output Power Total Combined O/P Power =

100 Watts Max 5 0 100 25 50 25 50 W

Set Point Voltage IO Nom 5.0 15.3 15.3 V

Output Current, IOUT 0.5 10 20 0 1.66 3.33 0 1.66 3.33 A

Output Ripple, p-p DC to 20MHz* 100 15 0 1 25 500 1 25 50 0 mV

Output Adjust Range * 4.60 5.50 Dependent on V1 V

Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C

Line Regulation VIN, Min≤VIN≤VIN, Max

IO = IO, Nom 0.05 1.0 1.0 2.0 1.0 2.0 %

Load Regulation Min Load to Rated Load 0.05 1.0 %

Current Limit Inception Other Outputs Min Load 26.0 5.0 5.0 A

Short-Circuit Current 20.0 26.0 4.0 5.0 4.0 5.0 A

Transient Response 50 to 100% Load Step

Peak Deviation 200 300 mV

Settling Time VOUT, 1% of VOUT, Nom 35 50 µSec

Overvoltage Limit 6.0 7.0 V

Efficiency IOUT1=10A, (IOUT2+IOUT3) = 4.2A 86 87 %

F.L. VIN=Nominal

IHB100T480512 OUTPUT

IHB100T REV A 10/01

Product: www.cdpowerelectronics.com

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Tel: 800.547.2537 Fax: 520.770.9369

C&D Technologies (Power Electronics) Ltd.

Shannon, Co. Clare, Ireland

Tel: +353.61.474.133 Fax:+353.61.474.141

C&D Technologies, (NCL)

Milton Keynes MK14 5BU UK

Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545

MECHANICAL

Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be

accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or

completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby

disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particula r use or in any specific application or arising from

any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in

user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerosp ace applications.

MATERIAL: Units are encapsulated in a low thermal resistance molding

compound which has excellent chemical resistance and electrical

properties in high humidity environments and over a wide operating

temperature range. The encapsulant and outer shell of the unit have

UL94V-0 ratings. Lead material is solder plated to allow ease of

solderability.

NOTES:

All dimensions are in inches (millimeters).

PIN PLACEMENT TOLERANCE: ± 0.005"

MECHANICAL TOLERANCE: ± 0.015"

Marked with: specific model ordered, date code, job code.

PIN SIDE UP

PIN SIDE

DOWN

SIDE VIEW

1 PRIMARY ON/OFF

2-VIN

3+VIN

4 SYNC IN

5 -V2

6 +V2

7 TRIM

8 +V1

9 -V1

10 SECONDARY ON/OFF

11 +V3

12 -V3

PIN CONNECTIONS