1N6265 GaAs INFRARED EMITTING DIODE FEATURES PACKAGE DIMENSIONS * Good optical to mechanical alignment 0.209 (5.31) * Mechanically and wavelength matched to the 0.184 (4.67) TO-18 series phototransistor * Hermetically sealed package 0.030 (0.76) NOM 0.155 (3.94) MAX * High irradiance level * (*) Indicates JEDEC registered values 1.00 (25.4) MIN SCHEMATIC ANODE (CASE) DESCRIPTION * The 1N6265 is a 940 nm LED in a 0.100 (2.54) 1 CATHODE 0.040 (1.02) 1. Derate power dissipation linearly 1.70 mW/C above 25C ambient. 2. Derate power dissipation linearly 13.0 mW/C above 25C case. 3. RMA flux is recommended. 4. Methanol or isopropyl alcohols are recommended as cleaning agents. 5. Soldering iron tip 1/16" (1.6mm) minimum from housing. 6. As long as leads are not under any stress or spring tension 7. Total power output, PO, is the total power radiated by the device into a solid angle of 2 H steradians. 45 NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of .010 (.25) on all non-nominal dimensions unless otherwise specified. ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Parameter Operating Temperature *Storage Temperature *Soldering Temperature (Iron)(3,4,5 and 6) *Soldering Temperature (Flow)(3,4 and 6) *Continuous Forward Current *Forward Current (pw, 1s; 200Hz) *Reverse Voltage *Power Dissipation (TA = 25C)(1) Power Dissipation (TC = 25C)(2) Symbol TOPR TSTG TSOL-I TSOL-F IF IF VR PD PD ELECTRICAL / OPTICAL CHARACTERISTICS *Peak Emission Wavelength Emission Angle at 1/2 Power *Forward Voltage *Reverse Leakage Current *Total Power Rise Time 0-90% of output Fall Time 100-10% of output 1 3 O0.020 (0.51) 2X PARAMETER 3 narrow angle, TO-46 package. 0.050 (1.27) 0.040 (1.02) ANODE (Connected To Case) Rating -65 to +125 -65 to +150 240 for 5 sec 260 for 10 sec 100 10 3 170 1.3 Unit C C C C mA A V mW W (TA =25C) (All measurements made under pulse conditions) TEST CONDITIONS SYMBOL MIN TYP MAX UNITS IF = 100 mA DPE 0 VF IR PO tr tf 935 -- -- -- 6 -- -- -- 40 -- -- -- 1.0 1.0 955 -- 1.7 10 -- -- -- nm Deg. V A mW s s IF = 100 mA VR = 3 V IF = 100 mA 2001 Fairchild Semiconductor Corporation DS300277 3/6/01 1 OF 3 www.fairchildsemi.com 1N6265 GaAs INFRARED EMITTING DIODE 100 1.4 PO - NORMALIZED POWER OUTPUT NORMALIZED POWER OUTPUT 50 Pulsed PW 80 s Forward Current 20 10 5 2 Continuous Forward Current 1.0 0.5 0.2 Normalized IF = 100 mA TA = 25C 0.1 0.05 0.02 1.2 1.0 0.8 0.6 Normalized IF = 100 mA TA = 25 C 0.4 0.2 0 0.01 .001 .002 .005 .01 .02 .05 0.1 0.2 0.5 1.0 2 5 10 -25 -50 IF - FORWARD CURRENT (mA) 25 50 75 100 125 150 TA - AMBIENT TEMPERATURE (C) Fig. 1 Power Output vs. Input Current Fig. 2 Power Output vs. Temperature 100 80 10 8.0 6.0 60 IF - FORWARD CURRENT (mA) 4.0 IF - FORWARD CURRENT (mA) 0 2.0 1.0 0.8 0.6 0.4 0.2 .08 .06 .04 .02 40 20 TA = 100C 25C 55C 10 8 6 4 2 .01 0 0 1 2 3 4 5 6 7 8 9 10 .9 1.0 VF - FORWARD VOLTAGE (V) 1.1 1.2 1.3 1.4 1.5 VF - FORWARD VOLTAGE (V) Fig. 3 Forward Voltage vs. Forward Current Fig. 4 Forward Voltage vs. Forward Current 100 RELATIVE OUTPUT (%) 80 60 40 20 50 100 80 60 40 20 0 20 40 60 80 100 0- ANGULAR DISPLACEMENT FROM OPTICAL AXIS DEGREES Fig. 5 Typical Radiation Pattern www.fairchildsemi.com 2 OF 3 3/6/01 DS300277 1N6265 GaAs INFRARED EMITTING DIODE DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. DS300277 3/6/01 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 3 OF 3 www.fairchildsemi.com