HPR120V - C&D Technologies, Inc.

HPR1XX REV K 8/01 Page 1

FEATURES

GLow Cost

GMultiple Package Styles

GInternal Input and Output

GFiltering

GNon-Conductive Case

GHigh Output Power Density:

10 Watts/Inch3

GExtended Temperature Range:

-25°C to +85°C

GEfficiencies to 79%

The HPR1XX Series uses advanced circuit design and packag-

ing technology to deliver superior reliability and performance.

A 170kHz push-pull oscillator is used in the input stage. Beat-

frequency oscillation problems are reduced when using the

HPR1XX Series with high frequency isolation amplifiers.

Reduced parts count and high efficiency add to the reliability of

the HPR1XX Series. The high efficiency of the HPR1XX Series

means less internal power dissipation, as low as 190mW. With

reduced heat dissipation the HPR1XX Series can operate at

higher temperatures with no degradation. In addition, the high

efficiency of the HPR1XX Series means the series is able to offer

greater than 10 W/inch3 of output power density. Operation

down to no load will not impact the reliability of the series,

although a >1mA minimum load is needed to realize published

specifications.

The HPR1XX Series provides the user a low cost converter

without sacrificing reliability. The use of surface mounted

devices and advanced manufacturing technologies make it pos-

sible to offer premium performance and low cost.

Absolute Maximum Ratings

Internal Power Dissipation .......................................... 450mW

ShortCircuitDuration .................................................. Momentary

Lead Temperature (soldering, 10 seconds max ........... .+300°C *

* NOTE: Refer to Reflow Profile for SMD Models.

Ordering Information

HPR 1XX V/W

Device Family

HPR Indicates DC/DC Converter

Model Number

Selected from Table of Electrical Characteristics

Package Option

There is "no" package designator for the SIP package

V = DIP Package

W = SMD Package

Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to

be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or

completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby

disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from

any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and

in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace

applications.

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Tel: 800.547.2537 Fax: 520.770.9369

C&D Technologies (Power Electronics) Ltd.

Shannon, Co. Clare, Ireland

Tel: +353.61.474.133 Fax:+353.61.474.141

C&D Technologies, (NCL)

Milton Keynes MK14 5BU UK

Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545

POWER ELECTRONICS DIVISION

SERIES DC/DC CONVERTER

PRODUCT DATA SHEET

POWER: 0.75 Watt

OUTPUT: Single Output

SIZE: Multiple Package Styles

HPR1XX

Product Site: www .cdpowerelectronics.com

Corporate Site: www .cdtechno.com

HPR1XX REV K 8/01Page 2

NOMINAL RATED RATED INPUT CURRENT REFLECTED

INPUT OUTPUT OUTPUT RIPPLE

VOLTAGE VOLTAGE CURRENT NO LOAD RATED LOAD CURRENT EFFICIENCY

MODEL (VDC) (VDC) (mA) (mA) (mA) (mAp-p) (%)

HPR100 5 5 150 20 216 10 69

HPR101 5 12 62 20 212 5 70

HPR102 5 15 50 20 212 5 71

HPR103 5 ±5 ±75 20 218 5 68

HPR104 5 ±12 ±30 20 212 5 68

HPR105 5 ±15 ±25 20 200 5 75

HPR 1 0 6 12 5 1 50 10 90 5 69

HPR107 12 12 62 10 81 5 77

HPR108 12 15 50 10 81 5 77

HPR109 12 ±5 ±75 10 88 5 71

HPR110 12 ±12 ±30 10 81 5 74

HPR111 12 ±15 ±25 10 81 5 77

HPR 1 1 2 15 5 150 8 72 5 69

HPR113 15 12 62 872 5 69

HPR114 15 15 50 872 5 69

HPR115 15 ±5 ±75 872 5 69

HPR116 15 ±12 ±30 863 5 76

HPR117 15 ±15 ±25 863 5 79

HPR 1 1 8 24 5 150 8 48 15 6 5

HPR119 24 12 62 8 4 8 15 65

HPR120 24 15 50 8 4 5 15 69

HPR121 24 ±5 ±75 8 45 15 69

HPR122 24 ±12 ±30 8 4 5 15 67

HPR123 24 ±15 ±25 8 4 5 15 69

Note: Other input to output voltages may be available. Please contact factory.

PARAMETER CONDITIONS MIN TYP MAX UNITS

INPUT

Voltage Range 4.5 5 5.5 VDC

10.8 12 13.2 VDC

13.5 15 16.5 VDC

21.6 24 26.4 VDC

Voltage Rise Time See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters"

ISOLATION

Rated Voltage 750 VDC

Test Voltage 60 Hz, 10 Seconds 75 0 Vrms (1060pk)

Resistance 10 GΩ

Capacitance 25 100 pF

Leakage Current VISO= 240VAC, 60Hz 2 8.5 µArms

OUTPUT

Rated Power 750 m W

Voltage Setpoint Accuracy Rated Load, Nominal VIN ±5 %

Ripple & Noise BW = DC to 10MHz 45 mV p- p

BW =10Hz to 2MHz 30 mV rms

HPR103 BW = DC to 10MHz 90 mV p -p

Voltage (Over Input Voltage Range) 1mA Load, VOUT = 5V 7 VDC

1mA Load, VOUT = 12V 15 VDC

1mA Load, VOUT = 15V 18 VDC

Temperature Coefficent .01 %/°C

REGULATION

Line Regulation High Line to Low Line 1 %/%V i n

GENERAL

Switching Frequency 170 kH z

Frequency Change Over Line and Load 24 %

Package Weight 2 g

MTTF per MIL-HDBK-217, Rev. E* Circuit Stress Method

Ground Benign TA = +25°C 7.9 MH r

Fixed Ground TA = +35°C 1.9 MH r

Naval Sheltered TA = +35°C 1.2 MH r

Airborne Uninhabited Fighter TA = +35°C 300 kHr

TEMPERATURE

Specification -2 5 +2 5 +85 ° C

Operation -40 +100 °C

Storage -40 +110 °C

ELECTRICAL SPECIFICATIONS

Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.

COMMON SPECIFICATIONS

Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.

*For demonstrated MTTF results reference Power Convertibles Reliability Report HPR105

HPR1XX REV K 8/01 Page 3

MECHANICAL Package/Pinout "V" and "W"

0.100±0.010"

(2.54±0.25)

0.020±0.002"

(0.51±0.05)

0.015±0.005"

(0.38±0.13)

0.375±0.005"

(9.52±0.13)

0.785±0.010"

(19.94±0.25)

1413 1110

321 4765

0.525±0.010"

(13.34±0.25) 0.695±0.015"

(17.65±0.38)

0.014±0.002"

(0.36±0.05) .015±.010"

(.38±.26)

0.100±0.010"

(2.54±0.25)

0.020±0.002"

(0.51±0.05)

0.015±0.005"

(0.38±0.13)

0.375±0.005"

(9.52±0.13)

0°-15°0.125+0.030"

-0.000"

(3.18+0.76)

( -0.00)

0.785±0.010"

(19.94±0.25)

1413 1110

321 4765

0.525±0.010"

(13.34±0.25) 0.695±0.015"

(17.65±0.38)

0.600"

(15.24)

DIP PACKAGE SMD PACKAGE

END VIEWS

SIDE VIEWS

TOP VIEWS

HPR1XXV HPR1XXW

PIN# SINGLES DUALS

1 +VIN +VIN

2 -VIN -VIN

3NCNC

4NCNC

5 -VOUT -VOUT

6 NC Common

7 +VOUT +VOUT

8NCNC

9NCNC

10 NC NC

11 NC NC

13 NC NC

14 NC NC

PIN CONNECTIONS

NOTES:

NC = Do Not Connect.

Duplicate pin functions are internally connected.

All dimensions are in inches (millimeters).

GRID: 0.100 inches (2.54 millimeters)

100

150

200

250

TEMPERATURE (°C)

TIME (seconds)

235 °C MAX

220

190

30 sec MAX

(>220°C)

90 sec MAX

(>190°C)

0.730"

(18.54)

0.650"

(16.51)

0.100"

(2.54)

0.080"

(2.03)

0.040"

(1.02)

1413 1110

3214765

RECOMMENDED REFLOW PROFILERECOMMENDED LAND PATTERN

MECHANICAL "SIP" Package/Pinout

Notes:

All dimensions are in inches (millimeters).

GRID: 0.100 inches (2.54 millimeters)

PIN PLACEMENT TOLERANCE: ± 0.015"

*Common pin not present on single output models.

PIN CONNECTIONS

1. +VIN 2. -VIN

4. -VOUT 5. COM*

6. +VOUT

FRONT

VIEW

RIGHT

SIDE

VIEW

BOTTOM

VIEW

0.77 +0.010”

(19.56 +0.25)

0.02 +0.002”

(0.51 +0.05) 0.18 +0.015”

(4.57 +0.38)

0.140”

(3.56) MIN

1 2 4 *5 6

0.400 +0.010”

(10.16 +0.25)

0.240 +0.010”

(6.09 +0.25)

0.020 +0.010”

(0.51 +0.25)

0.01 +0.002”

(0.25 +0.05)

0.035 +0.015”

(0.89 +0.38)

HPR1XX REV K 8/01Page 4

VOUT VS LOAD

(5Vout Models) VOUT VS LOAD

(±5Vout Models) VOUT VS LOAD

(12Vout Models)

VOUT VS LOAD

(±12Vout Models) VOUT VS LOAD

(15Vout Models) VOUT VS LOAD

(±15Vout Models)

0 40 120 160

5.3

5.5

5.7

4.9

5.1

020406080

11.9

12.0

12.1

12.2

12.3

12.4

020406080

4.6

4.8

5.0

5.2

5.4

010203040

12.0

12.1

12.2

12.3

12.4

12.5

14.9

15.1

15.3

15.5

15.7

15.9

020406080 0

13.5

14.0

14.5

15.0

15.5

16.0

Vout

Vout Frequency (KHz)

Output Current (mA) Output Current each load (mA) Output Current each load (mA)

12.5

Output Current each load (mA)

12.6

Output Current each load (mA) Output Power each load (Watts)

0.2 0.4 0.6 0.8 1.0

16.5

040 80 100

EFFICIENCY VS LOAD

% of Rated Load (%)

Efficiency (%)

OSCILLATION FREQUENCY VS

TEMPERATURE

220

200

180

160

140-30 0 30 60 90

Temperature (°C)

SAFE OPERATING AREA

Rise Time of Input Voltage (mS)

LOAD CAPACITANCE vs INPUT RISE TIME

(5 Vout models)

Total Load Capacitance (uF)

0 5 10 15 20 25 30 35 40 45 50

600

500

400

300

200

100

SAFE OPERATING AREA

Rise Time of Input Voltage (mS)

LOAD CAPACITANCE vs INPUT RISE TIME

(12 Vout models)

Total Load Capacitance (uF)

0 5 10 15 20 25 30 35 40 45 50

SAFE OPERATING AREA

Rise Time of Input Voltage (mS)

LOAD CAPACITANCE vs INPUT RISE TIME

(15 Vout models)

Total Load Capacitance (uF)

0 5 10 15 20 25 30 35 40 45 50

SAFE OPERATING AREA

NOTES:

1.) When operated within the SAFE OPERATING AREA as defined

by the above curves, the output voltage of HPR1XX devices is

guaranteed to be within 95% of its steady-state value within 100

milliseconds after the input voltage has reached 95% of its steady-

state value.

2.) For dual output models, total load capacitance is the sum of the

capacitances on the plus and minus outputs.

TYPICAL PERFORMANCE CURVES

Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.