TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
23
ISOLATED RESISTOR NETWORK
—
RN1 Vikin
g
Product Description
The RN-1 is an isolated resistor network designed to offer a highly integrated and stable resistor
network for general-purpose applications. Thin film networks offer significant advantages over
conventional thick film processes in terms of tighter absolute and ratio tolerances, greater stability,
lower noise, and Temperature coefficient of resistance (TCR). Furthermore, they offer superior high
frequency performance with minimal parasitic inductance and capacitance. Integrated thin film
networks also afford the benefits of board space savings, reduced assembly costs, and increased
reliability with fewer components
Features Schematic Power Derating
－Reliable TaN thin-film-on-silicon technology
－8 , 10 ,12 terminating lines per package
－PCB board space saving, assembly cost reduction
Applications
－Series termination
－Parallel termination
－Digital pulse squaring
－Coding and decoding
－Te l e m e t r y
Specifications How to Order
Description Standard Non-Standard1
Abs. Tolerance code J D F G
Absolute Tolerance (R) ±5％ ±0.5% ±1% ±2%
Ratio Tolerance cade X R
Q P
Ratio Tolerance (R) No Ratio Tol. ±0.1% ±0.2% ±0.5%
TCR code H A
B C
TCR (ppm/℃) ±100 ±75 ±50 ±25
TTCR (ppm/℃) ±25 ±5, ±10
Power Rating / Resistor
@Ta=70℃
0.100 watt for ≦1K
0.025 watt for ＞1K
Maximum Operating
Voltage 50V
Minimum Insulation
Resistance
10,000MΩ
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering
(NRE) charge and a minimum order/lot
size may apply for all fully customized
requirements.
Standard Resistance Values
Resistance (Ω) 10 22 33 39 47 51 68 220 330 470 510 680 1K 2.2K 4.7K 10K 20K 50K 100K
Correspondent Value Code 100 220 330 390 470 510 680 221 331 471 511 681 102 222 472 103 203 503 104
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packages → TSSOP 20,24 Pin
Resistance Variation → 10~100KΩ
Packing → Wafer form
pin # n
n = Number of Pins
pin # 1
0.60
0.80
1.00
25 1251007550 150
WATTS
AMBIENT TEMPERATURE (℃)
QSOP 16
NB SOP 8
QSOP 20 , 24
NB SOP 14 , 16
Pin No. Ea.tube
16 100
20 50
QSOP
24 50
8 100
14 50
N/B SOP
16 50
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
24
Product Description
The RN-2 is a bussed resistor network designed to offer a highly integrated and stable resistor
network for general-purpose applications. Thin film networks offer significant advantages over
conventional thick film processes in terms of tighter absolute and ratio tolerances, greater stability,
lower noise, and Temperature coefficient of resistance (TCR). Furthermore, they offer superior high
frequency performance with minimal parasitic inductance and capacitance. Integrated thin film
networks also afford the benefits of board space savings, reduced assembly costs, and increased
reliability with fewer components
Features Schematic Power Derating
－Reliable TaN thin-film-on-silicon technology
－Multiple resistors tied to a common mode
－Ultra-miniature package complies to JEDEC
standards
Applications
－Pull up / pull down
－Parallel termination
－Digital pulse squaring
－Coding and decoding
Standard Specifications How to Order
Description Standard No-Standard1
Abs. Tolerance code J D F G
Absolute Tolerance (R) ±5％ ±0.5% ±1% ±2%
Ratio Tolerance cade X R
Q P
Ratio Tolerance (R) No Ratio Tol. ±0.1% ±0.2% ±0.5%
TCR code H A
B C
TCR (ppm/℃) ±100 ±75 ±50 ±25
TTCR (ppm/℃) ±25 ±5, ±10
Power Rating / Resistor
@Ta=70℃
0.100 watt for ≦1K
0.025 watt for ＞1K
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering
(NRE) charge and a minimum order/lot size
may apply for all fully customized
requirements.
Standard Resistance Values
Resistance (Ω) 100 220 270 330 390 470 1K 1.5K 2K 2.2K 4.7K 10K 100K
Correspondent value Code 101 221 271 331 391 471 102 152 202 222 472 103 104
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packages → TSSOP 20,24 Pin
Resistance Variation → 10~100KΩ
Packing → Wafer form
BUSSED RESISTOR NETWORK
—
RN2 Vikin
g
pin # 1
pin # n
n = Number of Pins
0.60
0.80
1.00
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 16
NB SOP 8
QSOP 20 , 24
NB SOP 14 , 16
Pin No. Ea.tube
16 100
20 50
QSOP
24 50
8 100
14 50
N/B SOP
16 50
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
25
16 15 14 13 12 11 10 9
87654321
R2
R1
R1
R2
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 16
NB SOP 16
Product Description
The RN-3 is an integrated dual Therein termination network designed to eliminate transmission line
effects on high-speed data lines. SCSI (Small Computer Systems Interface) is a bus interface
covered by an ANSI Standard that allows for peripheral devices to be connected in a daisy chain and
communicate with the host processor Fast edge signals transmitted through the SCSI cable can
generate ringing on the bus that can slow down communication between the host and peripherals.
The SCSI standard recommends Therein termination at the host and peripheral locations to
eliminate these transmission line effects.
Proper resistor termination requires a resistor whose value closely matches the characteristic
impedance of the transmission line. Thin film networks offer significant advantages over conventional
thick film processes in terms of tighter absolute and ratio tolerances, greater stability, lower noise,
and Temperature Coefficient of Resistance (TCR). Furthermore, they offer superior high frequency
performance with minimal parasitic inductance and capacitance. Integrated thin film networks also
afford the benefits of board space savings, reduced assembly costs, and increased reliability with
fewer components.
Features Schematic Power Derating
－Proven TaN thin-film-on technology
－Saves board space and reduces assembly cost
－Ultra-miniature package complies to JEDEC
standards
Applications
－Therein termination
－SCSI termination
－SCSI Buss device
－Pull UP / pull down
Specifications1 How to Order
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a
minimum order/lot size may apply for all fully customized
requirements.
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=220, R2=330 R1=221, R2=331
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packing → Wafer form
DUAL THE
V
ENIN TERMINATION NETWORK
—
RN3 Vikin
g
Pin No. Ea.tube
QSOP 16 100
N/B SOP 16 50
RN3 221 JQS 16 R
Packing
R=Re el
T=Tube
Pin Count
QS OP =16 P in
NB SOP =16 Pin
Package Type
QS =QS OP
NB=Na rrow Body S OP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Value Code
(Refer to R1 Value Table)
Product Code
R N3 =Du a l Te rm ina to r
331
R2 Value Code
(Refer to R2 Value Table)
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
26
1.00
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 20
Product Description
The RN-4 is a Small Computer System Interface (SCSI) compliant termination network that provides
the mechanical, electrical, and functional requirements for an input/output bus to connect small
computers with a variety of peripheral devices. The most common application of this bus is to
connect small computers with disk drive (mass storage) units. The RN-4 provides 7 or 9 sets of
three-resistor terminator configuration for the differential-line version of the SCSI bus in just one
package, which saves board space and reduced assembly costs by replacing 21 or 27 discrete
components.
Thin film networks offer significant advantages over conventional thick film processes in terms of
tighter absolute and ratio tolerances, greater stability, lower noise, and Temperature Coefficient of
Resistance (TCR). Furthermore, they offer superior high frequency performance with minimal
parasitic inductance and capacitance. Integrated thin film networks also afford the benefits of board
space savings, reduced assembly costs, and increased reliability with fewer components
Features Schematic Power Derating
－Reliable TaN thin-film-on-silicon technology
－SCSI Termination
－18 terminating lines / package
Applications
－Differential SCSI termination
－SCIS Buss devices
Specifications1 How to Order
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=330, R2=150 R1=331, R2=151
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packages → TSSOP 20 Pin
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a
minimum order/lot size may apply for all fully customized
requirements.
SCSI DIFFERENTIAL TERMINATOR
—
RN4 Vikin
g
16 15 14 13 12 11
10987654321
17181920
R1
R2
R1
Pin No. Ea.tube
QSOP 20 50
RN4 331 JQS 20 R
Packing
R=Ree l
T=Tube
Pin Count
QSOP=20 Pin
Package Type
QS =QS OP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Value Code
(Re fe r to R1 Value Ta ble)
Product Code
RN4=Different Te rminator 1
151
R2 Value Code
(Re fe r to R2 Value Ta ble)
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
27
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 16
NB SOP 16
Product Description
The RN-5 is a Small Computer System Interface (SCSI) compliant termination network that provides
the mechanical, electrical, and functional requirements for an input/output bus to connect small
computers with a variety of peripheral devices. The most common application of this bus is to
connect small computers with disk drive (mass storage) units. The RN-5 provides 7 or 9 sets of
three-resistor terminator configuration for the differential-line version of the SCSI bus in just one
package, which saves board space and reduced assembly costs by replacing 21 or 27 discrete
components.
Thin film networks offer significant advantages over conventional thick film processes in terms of
tighter absolute and ratio tolerances, greater stability, lower noise, and Temperature Coefficient of
Resistance (TCR). Furthermore, they offer superior high frequency performance with minimal
parasitic inductance and capacitance. Integrated thin film networks also afford the benefits of board
space savings, reduced assembly costs, and increased reliability with fewer components
Features Schematic Power Derating
－Proven TaN thin-film technology
－QSOP available
－SCSI termination
Applications
－Differential SCSI termination
－SCSI Buss devices
Specifications1 How to Order
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=330, R2=150 R1=331, R2=151
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±10, ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a
minimum order/lot size may apply for all fully customized
requirements.
SCSI DIFFERENTIAL TERMINATOR—RN5 Viking
16 15 14 13 12 11 10 9
87654321
R1
R1
R2
Pin No. Ea.tube
QSOP 16 100
RN5 331 JQS 16 R
Packing
R=Re e l
T=Tube
Pin Count
QSOP =16 Pin
NB SOP =16 P in
Package Type
QS =QSOP
NB=Narrow Body S OP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Va lu e Cod e
(Refe r to R1 Value Ta ble )
Product Code
RN5=Differential
Termina tor 2
151
R2 Va lu e Cod e
(Refe r to R2 Value Ta ble )
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
28
R/2R LADDER NETWORKS—RA1 Viking
12345678
15 14 13 1216 11 10 9
R2
R2
R1
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 16
NB SOP 16
Product Description
The R/2R Ladder Network is commonly used for Digital to Analog (D/A) conversions and Analog to
Digital (A/D) conversion by successive approximations. The bits of the lassoer are the points at
which input signals are presented to the ladder and the output terminal (OUT) is the point at which
the output is taken from the R/2R ladder. This terminal (OUT) is commonly used to drive an
operational amplifier. The terminating resistor is always connected to ground.
Thin film networks offer significant advantages over conventional thick film processes in terms of
tighter absolute and ratio tolerances, greater stability, lower noise, and Temperature Coefficient of
Resistance (TCR). Furthermore, they offer superior high frequency performance with minimal
parasitic inductance and capacitance. Integrated thin film networks also afford the benefits of board
space savings, reduced assembly costs, and increased reliability with fewer components.
Features Schematic Power Derating
－1:2 ratio for resistor ladder
－Proven TaN thin-film technology
－QSOP available
Applications
－D/A converters
－A/D converters
Specifications1 How to Order
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=10K, R2=20K R1=103, R2=203
R1=25K, R2=50K R1=253, R2=503
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Resistance Variation → 10~10KΩ
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a
minimum order/lot size may apply for all fully customized
requirements.
Pin No. Ea.tube
QSOP 16 100
RA1 103 JQS 16 R
Packing
R=Re e l
T=Tube
Pin Count
QS OP =16 P in
NB SOP =16 Pin
Package Type
QS =QS OP
NB=Narrow Body S OP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Valu e Co d e
(Refer to R1 Value Table)
Product Code
RA1=R/2R Ladde r
203
R2 Valu e Co d e
(Refer to R2 Value Table)
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
29
HIGH PERFORMANCE GTL/ECL Viking
TERMINATION NETWORK—RA2
Product Description
The RA-2 is a high performance bus termination network ideal for high speed bus termination
applications. The RA-2 meets all intel® Pentium termination specifications as well as the termination
requirements of other high-speed microprocessors such as the DEC Alpha, Motorola PowerPC, SGI
MIPS, and Sun SPARC. A 300-line termination solution can be achieved with just 14 RA-2 networks.
A terminating resistor is used to eliminate unwanted transmission line effects such as ringing,
overshoots and undershoots on printed circuit board traces, and/or provide DC pull-up/pull-down.
Proper resistor termination requires a resistor whose value closely matches the characteristic
impedance of the transmission line. Thin film networks offer significant advantages over conventional
thick film processes in terms of tighter absolute and ratio tolerances, greater stability, lower noise,
and Temperature Coefficient of Resistance (TCR). Furthermore, they offer superior high frequency
performance with minimal parasitic inductance and capacitance. Integrated thin film networks also
afford the benefits of board space savings, reduced assembly costs, and increased reliability with
fewer components.
Features Schematic Power Derating
－22-Line high-speed termination
－Stable thin-film-on-silicon technology
－Miniaturized package as QSOP
Applications
－Servers, Desktops & mobile
－Computing Devices
－High speed microprocessor system termination
－GTL / ECL Termination
Specifications1 How to Order
Resistance Values
Resistance (Ω) 33 47 50 56 68 75 90
Correspondent Value Code 330 470 500 560 680 750 900
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packages → TSSOP 24 Pin
Resistance Variation → 10~10KΩ
Packing → Wafer form
Description Values
Absolute Tolerance (R) ±2% ±5％
TCR ±100ppm/℃
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor @Ta=70℃ 0.100 watt
Package Power Rating @ Ta=70℃ 1.00watt / QSOP
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
R
pin # 24
pin # 1
1.00
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )
℃
QSOP 24
RA2 330 JQS 24 R
Packing
R=Re e l
T=Tube
Pin Count
QSOP=24 P in
Package Type
QS=QSOP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
Va lu e Co d e
(Re fer to R Value Ta ble )
Product Code
RA2=Busse d Te rminator
Pin No. Ea.tube
QSOP 24 50
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
30
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )℃
QSOP 16
NB SOP 16
Product Description
The NTL Terminator is designed for terminating high speed bus lines where NTL (NMOS)
Transceiver Logic) and other high-speed system devices are employed. R1 and R2 value
are selected according to standard requirements. Fabricated with Tantalum Nitride on
Silicon, these resistors feature excellent stability, TCR and Tracking Performance. The
NTL Terminator is packaged in a 16-pin QSOP package offering exceptional functional
density for space-constrained applications.
Features Schematic Power Derating
－6-Line NTL termination
－Stable thin-film-on-silicon technology
－Ultra-miniature 16-pin QSOP package
Applications
－High-speed transceiver bus termination
－NTL, GTL systems
－Ideal for space-constrained applications
Specifications1 How to Order
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=22K, R2=90K R1=220, R2=900
Standard Packages Options
Viking is capable of supply following options based on
customer’s demand
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Isolation Resistance 10000megΩ
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
NTL TERMINATOR —RA3 Viking
12345678
15 14 13 1216 11 10 9
R1
R2
Pin No. Ea.tube
QSOP 16 100
N/B SOP 16 50
RA3 220 JQS 16 R
Packing
R=Re e l
T=Tube
Pin Count
QS OP =16 P in
NB S OP =16 P in
Package Type
QS =QS OP
NB=Narrow Body SOP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Va lu e Cod e
(Re fer to R1 Value Ta ble)
Product Code
RA3=NTL Te rminator
900
R2 Va lu e Cod e
(Re fer to R2 Value Ta ble)
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
31
TERMINATION NETWORK FOR NETWORKING Viking
APPLICATIONS—RA4
RA-4
V.35 Terminator
20 19 18
123
17 16 15
456 87
12 1114 13
R1 R1
R2
R3 R3 R4
910
Product Description
The RA-4 is a high performance termination network that ensures proper signal integrity
between transmitter and receiver sections of the ITU-T V.35 communications protocol
interface. The RA-4 is configured as a T or delta network for termination at the generator
and receiver ends of the V.35 interface.
Features Schematic Power Derating
－Proven TaN thin-film technology
－Meets IUT-T V.35 termination specification
－Separate ground for transmit terminations
－Version for receiver input impedance
compensation
Applications
－IUT-T V-.35 termination in communications
equipment
Specifications1 How to Order
Resistance Values
Rs Value Code R1 Value (Ω) R2 Value (Ω) R3 Value (Ω) R4 Value (Ω)
CO1 50 125 50 125
CO2 50 125 515 124
Standard Packages Options
Viking is capable of supply following options based on customer’s
demand
Packing → Wafer form
Package → TSSOP 20 pin
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor @Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
1.00
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )℃
QSOP 20
0.80
Pin No. Ea.tube
QSOP 20 50
RA4 CO1 JQS 20 R
Packing
R=Re e l
T=Tube
Pin Count
QSOP =20 P in
Package Type
QS=QSOP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
Value Code
(Re fe r to R Value Ta ble)
Product Code
RA4=V.35 Te rminator
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
32
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )℃
QSOP 16
NB SOP 16
Product Description
The V.35 Terminator is used to terminate fax modem lines according to the V.35 standard.
Two alternative termination configurations exit: ‘Star’ and ‘Delta’. These electrically
equivalent circuits both fulfill the V.35 standard specifications.
Fabricated with Tantalum Nitride on Silicon, these termination resistors feature excellent
stability, TCR and tracking performance. The JEDEC standard miniature QSOP package
offers the most space efficient V.35 Terminator array available
Features Schematic Power Derating
－Proven TaN Thin-film technology
－Multiple V.35 termination resistors
－Stable thin-film-on-silicon technology
－Ultra-miniature package complies to JEDEC
Standards
Applications
－Line Termination to V.35 standard
－Ideal for space-constrained applications
－Specified for modem
Specifications1 How to Order
Resistance Values
Rs Value
Code
R1 Value
(ohms)
R2 Value
(ohms)
CO1 50 125
Standard Packages Options
Viking is capable of supply following options based on
customer’s demand
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
V.35 “STAR” TERMINATOR —RA5 Viking
12345678
15 14 13 1216 11 10 9
R1
R2
R1
Pin No. Ea.tube
QSOP 16 100
N/B SOP 16 50
RA5 CO1 JQS 16 R
Packing
R=Reel
T=Tube
Pin Count
QSOP =16 Pin
NB SOP=16 Pin
Package Type
QS=QSOP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
Value Code
(Refer to R Value Table)
Product Code
RA5=V.35 Terminator
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
33
0.80
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )℃
QSOP 16
NB SOP 16
Product Description
The V.35 Terminator is used to terminate fax modem lines according to the V.35 standard.
Two alternative termination configurations exit: ‘Star’ and ‘Delta’. These electrically
equivalent circuits both fulfill the V.35 standard specifications.
Fabricated with Tantalum Nitride on Silicon, these termination resistors feature excellent
stability, TCR and tracking performance. The JEDEC standard miniature QSOP package
offers the most space efficient V.35 Terminator array available
Features Schematic Power Derating
－Proven TaN Thin-film technology
－Multiple V.35 termination resistors
－Stable thin-film-on-silicon technology
－Ultra-miniature package complies to JEDEC
Standards
Applications
－Line Termination to V.35 standard
－Ideal for space-constrained applications
－Excellent for modem communication
Specifications1 How to Order
Resistance Values
Resistance (Ω) Correspondent Value Code
R1=330, R2=120 R1=331, R2=121
Standard Packages Options
Viking is capable of supply following options based on
customer’s demand
Resistance Variation
→ 10~500Ω
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃ 0.100 watt
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
V.35 “DELTA” TERMINATOR —RA6 Viking
12345678
15 14 13 1216 11 10 9
R1
R2
R1
Pin No. Ea.tube
QSOP 16 100
N/B SOP 16 50
RA6 301 JQS 16 R
Packing
R=Re el
T=Tube
Pin Count
QS OP =16 P in
NB S OP =16 P in
Package Type
QS =QS OP
NB=Na rrow Body S OP
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
R1 Value Code
(Re fe r to R1 Value Table )
Product Code
RA6=V.35 Delta Terminator
121
R2 Value Code
(Re fe r to R2 Value Table )
J
Standard Grade Tolerance
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
TEL: 886-3-5972931 FAX: 886-3-5973494 E-mail: Sales@ Viking.com.tw URL:http//www.viking.com.tw
34
Product Description
The HSTL Dual Terminator is designed primarily for terminating bus lines in HSTL systems
(High-Speed-Transceiver-Logic). Resistor values have been selected for that the therein impedance,
i.e. the parallel combination of R1 and R2, will match the most common line-termination impedances
associated with such systems. Fabricated with tantalum Nitride on Silicon, these resistors feature
excellent stability, TCR and tracking performance. The HSTL Dual Terminator is packaged in a 24pin
QSOP package offering exceptional functional density for space constrained applications
Features Schematic Power Derating
－16-Line Thevenin termination
－Stable thin-film-on-silicon technology
－Ultra-miniature package complies to JEDEC
Standards
Applications
－High-speed bus termination
－Designed for HSTL Systems
－Ideal for space-constrained applications
Specifications1 How to Order
Resistance Values
Rs Value
Code
R1 Value
(ohms)
R2 Value
(ohmS)
RT Value
(ohms)
CO1 94 94 47
CO2 100 100 50
CO3 112 112 56
CO4 136 136 68
Standard Packages Options
Viking is capable of supply following options based on
customer’s demand
Package → TSSOP 24 pin
Packing → Wafer form
Description Values
Tolerance code F G J
Absolute Tolerance (R) ±1% ±2% ±5％
TCR (ppm/℃) ±50 ±100 ±100
TTCR (Typical) ±25ppm/℃
Power Rating / Resistor
@Ta=70℃
0.100 watt for ≦1k
0.025watt for ＞1k
Maximum Operating Voltage 50V
Operation Temperature -55℃ ~ 125℃
Storage Temperature -65℃ ~ 150℃
Note 1: A Non-Recurring Engineering (NRE) charge and a minimum
order/lot size may apply for all fully customized requirements.
HSTL DUAL TERMINATOR —RA7 Viking
Pin No. Ea.tube
QSOP 24 50
1.0
25 1251007550 150
WATTS
AMBIENT TEMPERATURE( )℃
QSOP 16
12345678
23 22 21 2024 19 18 17
R1
R2
910 11 12
16 15 14 13
RA7 CO1 JQS 16 R
Packing
R=Reel
T=Tube
Pin Count
QS OP =24 Pin
NB SOP=24 Pin
Package Type
QS =QSOP
S ta nda rd Gra de To le ra n ce
J=±5%, ±100ppm/0C
G=±2%, ±100ppm/0C
Va lu e Co d e
(Re fer to R Va lue Table)
Product Code
RA7=V.35 Terminator
