Sil-Pad 800 (R) High Performance Insulator for Low-Pressure Applications Features and Benefits TYPICAL PROPERTIES OF SIL-PAD 800 PROPERTY Color * Thermal impedance: 0.45C-in2/W (@50 psi) * High value material * Smooth and highly compliant surface * Electrically isolating IMPERIAL VALUE Gold METRIC VALUE Gold Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.005 0.127 ASTM D374 Hardness (Shore A) 91 91 ASTM D2240 Elongation (%45 to Warp and Fill) 20 20 ASTM D412 1700 12 ASTM D412 -76 to 356 -60 to 180 -- 1700 1700 ASTM D149 Tensile Strength (psi) / (MPa) Continuous Use Temp (F) / (C) ELECTRICAL Dielectric Breakdown Voltage (Vac) Type 3 Electrodes 3000 ASTM D149 6.0 6.0 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 1.6 1.6 ASTM D5470 10 25 50 100 200 TO-220 Thermal Performance (C/W) 3.56 3.01 2.45 2.05 1.74 Thermal Impedance (C-in2/W) (1) 0.92 0.60 0.45 0.36 0.29 1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Sil-Pad 800 material combines a smooth and highly compliant surface characteristic with high thermal conductivity.These features optimize the thermal resistance properties at low pressure. Typical Applications Include: * Power supplies * Automotive electronics * Motor controls * Power semiconductors Configurations Available: * Sheet form, die-cut parts and roll form * With or without pressure sensitive adhesive Building a Part Number Standard Options NA Section E Section D 0.005 - AC - 1212 - Section C - Section B SP800 Section A Applications requiring low component clamping forces include discrete semiconductors (TO-220,TO-247 and TO-218) mounted with spring clips. Spring clips assist with quick assembly but apply a limited amount of force to the semiconductor.The smooth surface texture of Sil-Pad 800 minimizes interfacial thermal resistance and maximizes thermal performance. 3000 Dielectric Constant (1000 Hz) THERMAL PERFORMANCE vs PRESSURE Pressure (psi) The Sil-Pad 800 family of thermally conductive insulation materials is designed for applications requiring high thermal performance and electrical isolation.These applications also typically have low mounting pressures for component clamping. TEST METHOD Visual NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. _ _ _ = Standard configuration dash number, 1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls, or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard thicknesses available: 0.005" SP800 = Sil-Pad 800 Material Note: To build a part number, visit our website at www.bergquistcompany.com. Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_SP_800_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: SP800-0.005-00-1212