PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
1 Version:B1805
400W, 10V - 100V Surface Mount Transient Voltage Suppressor
FEATURES
● AEC-Q101 qualified
● Low profile package
● Photo Glass passivated junction
● Excellent clamping capability
● Moisture sensitivity level: level 1, per J-STD-020
● 400 watts peak pulse power capability with a 10 / 1000 μs
waveform (300W above 78V)
● Compliant to RoHS directive 2011/65/EU and
in accordance to WEEE 2002/96/EC
● Halogen-free according to IEC 61249-2-21
APPLICATIONS
● Switching mode power supply (SMPS)
● Adapters
● Lighting application
● On-board DC/DC converter
MECHANICAL DATA
● Case: DO-214AC (SMA)
●Molding compound meets UL 94V-0 flammability rating
● Terminal: Matte tin plated leads, solderable per J-STD-002
● Meet JESD 201 class 2 whisker test
● Polarity: As marked
● Weight: 0.06 g (approximately)
KEY PARAMETERS
PARAMETER VALUE UNIT
VWM 10 - 100 V
VBR 11.7 - 117 V
TJ MAX 175 °C
Package DO-214AC (SMA)
Configuration Single die
DO-214AC (SMA)
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak power dissipation (Note 1) PPPM 400 W
Steady state power dissipation PD 1 W
Peak forward surge current, 8.3 ms single half sine-wave
superimposed on rated load IFSM 40 A
Maximum instantaneous forward voltage at 25 A for
unidirectional only VF 3.5 V
Operating junction temperature range TJ -55 to +175 °C
Storage temperature range TSTG -55 to +175 °C
Notes:
1. Non-repetitive Current Pulse Per Fig.3 and derated above TA=25°C Per Fig.2. Rating is 300 W for VWM > 78 V
Devices for Bi-directional Applications
1. For Bi-directional use CA suffix (e.g. PGSMAJ10CA).
2. Electrical Characteristics Apply in Both Directions
Not Recommended
PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
2 Version:B1805
THERMAL PERFORMANCE
PARAMETER SYMBOL TYP. UNIT
Junction-to-lead thermal resistance per diode RӨJL 29 °C/W
Junction-to-ambient thermal resistance per diode RӨJA 120 °C/W
Junction-to-case thermal resistance per diode RӨJC 31 °C/W
Thermal Performance Note: Units mounted on PCB (5mm x 5mm Cu pad test board)
ELECTRICAL SPECIFICATIONS
(TA = 25°C unless otherwise noted)
Part number Marking
code
Breakdown
voltage
VBR@IT
(V)
(Note 1)
Test current
IT
(mA)
Working
stand-off
voltage
VWM
(V)
Maximum reverse
leakage current
IR@VWM
(µA)
(Note 1)
Maximum peak
impulse current
IPPM (A)
tp =10/1000 μs
Maximum clamping
voltage
VC@IPPM (V)
tp =10/1000 μs
Min. Max.
PGSMAJ10A PAX 11.1 12.30 1 10 5 23.5 17.0
PGSMAJ11A PAZ 12.2 13.50 1 11 1 22.0 18.2
PGSMAJ12A PBE 13.3 14.70 1 12 1 20.1 19.9
PGSMAJ13A PBG 14.4 15.90 1 13 1 18.6 21.5
PGSMAJ14A PBK 15.6 17.20 1 14 1 17.2 23.2
PGSMAJ15A PBM 16.7 18.50 1 15 1 16.4 24.4
PGSMAJ16A PBP 17.8 19.70 1 16 1 15.4 26.0
PGSMAJ17A PBR 18.9 20.90 1 17 1 14.5 27.6
PGSMAJ18A PBT 20.0 22.10 1 18 1 13.7 29.2
PGSMAJ20A PBV 22.2 24.50 1 20 1 12.3 32.4
PGSMAJ22A PBX 24.4 26.90 1 22 1 11.3 35.5
PGSMAJ24A PBZ 26.7 29.50 1 24 1 10.3 38.9
PGSMAJ26A PCE 28.9 31.90 1 26 1 9.5 42.1
PGSMAJ28A PCG 31.1 34.40 1 28 1 8.8 45.4
PGSMAJ30A PCK 33.3 36.8 1 30 1 8.3 48.4
PGSMAJ33A PCM 36.7 40.6 1 33 1 7.5 53.3
PGSMAJ36A PCP 40.0 44.2 1 36 1 6.9 58.1
PGSMAJ40A PCR 44.4 49.1 1 40 1 6.2 64.5
PGSMAJ43A PCT 47.8 52.8 1 43 1 5.8 69.4
PGSMAJ45A PCV 50.0 55.3 1 45 1 5.5 72.7
PGSMAJ48A PCX 53.3 58.9 1 48 1 5.2 77.4
PGSMAJ51A PCZ 56.7 62.7 1 51 1 4.9 82.4
PGSMAJ54A PRE 60.0 66.3 1 54 1 4.6 87.1
PGSMAJ58A PRG 64.4 71.2 1 58 1 4.3 93.6
PGSMAJ60A PRK 66.7 73.7 1 60 1 4.1 96.8
PGSMAJ64A PRM 71.1 78.6 1 64 1 3.9 103
PGSMAJ70A PRP 77.8 86 1 70 1 3.5 113
PGSMAJ75A PRR 83.3 92.1 1 75 1 3.3 121
PGSMAJ78A PRT 86.7 95.8 1 78 1 3.2 126
PGSMAJ85A PRV 94.4 104 1 85 1 2.2 137
PGSMAJ90A PRX 100 111 1 90 1 2.1 146
PGSMAJ100A
PRZ 111 123 1 100 1 1.9 162
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
2. Mounted on 5 x 5mm copper pads to each terminal
3. Lead temperature at TL=75°C
4. Measure on 8.3ms single half sine-wave duty cycle=4 pulses per minutes maximum
5. Peak pulse power waveform is 10/1000 μs
Not Recommended
PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
3 Version:B1805
ORDERING INFORMATION
ORDERING CODE
(Note 1) PACKAGE PACKING
PGSMAJxxxAHE3G Clip SMA 1,800 / 7” Plastic reel
PGSMAJxxxAHE2G Clip SMA 7,500 / 13” Plastic reel
PGSMAJxxxA E3G Clip SMA 1,800 / 7” Plastic reel
PGSMAJxxxA E2G Clip SMA 7,500 / 13” Plastic reel
PGSMAJxxxCAHE3G Clip SMA 1,800 / 7” Plastic reel
PGSMAJxxxCAHE2G Clip SMA 7,500 / 13” Plastic reel
PGSMAJxxxCA E3G Clip SMA 1,800 / 7” Plastic reel
PGSMAJxxxCA E2G Clip SMA 7,500 / 13” Plastic reel
PGSMAJxxxA R3G SMA 1,800 / 7” Plastic reel
PGSMAJxxxAHR3G SMA 1,800 / 7” Plastic reel
PGSMAJxxxA M2G SMA 7,500 / 13” Plastic reel
PGSMAJxxxAHM2G SMA 7,500 / 13” Plastic reel
Note 1:
"xxx" defines voltage from 10V (PGSMAJ10A) to 100V (PGSMAJ100A)
Not Recommended
PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
4 Version:B1805
CHARACTERISTICS CURVES
(TA = 25°C unless otherwise noted)
Fig.1 Peak Pulse Power Rating Curve
Fig.2 Pulse Derating Curve
Fig.3 Clamping Power Pulse Waveform
Fig.4 Typical Junction Capacitance
0.1
1
10
100
0 1 10 100 1000 10000
PPPM, PEAK PULSE POWER (KW)
td- PULSE WIDTH (μs)
Non-Repetitive Pulse
Waveform Shown in Fig.3
TA=25°C
PGSMAJ10A - PGSMAJ78A
PGSMAJ85A - PGSMAJ100A
0
20
40
60
80
100
120
140
0 0.5 1 1.5 2 2.5 3
t, TIME (ms)
td
Peak value
IPPM
Rise time tr=10μs to 100%
Half value-IPPM/2
10/1000μs, waveform
as defined by R.E.A.
Pulse width(td) is defined
as the point where the peak
current decays to 50% of IPPM
PEAK PULSE CURRENT (%)
1
10
100
1000
1 10 100
REVERSE VOLTAGE (V)
f=1.0MHz
Vsig=50mVp-p
PGSMAJ40A
PGSMAJ10A
CAPACITANCE (pF)
0
25
50
75
100
0 25 50 75 100 125 150 175
TJ- INITIAL JUNCTION TEMPERATURE (°C)
PEAK PULSE POWER (PPPM) OR CURRENT(IPP)
DERATING IN PERCENTAGE (%)
Not Recommended
PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
5 Version:B1805
PACKAGE OUTLINE DIMENSIONS
DO-214AC (SMA)
SUGGESTED PAD LAYOUT
MARKING DIAGRAM
P/N = Marking Code
G = Green Compound
YW = Date Code
F = Factory Code
DIM Unit (mm) Unit (inch)
Min Max Min Max
A 1.27 1.58 0.050 0.062
B 4.06 4.60 0.160 0.181
C 2.29 2.83 0.090 0.111
D 1.99 2.50 0.078 0.098
E 0.90 1.41 0.035 0.056
F 4.95 5.33 0.195 0.210
G 0.10 0.20 0.004 0.008
H 0.15 0.31 0.006 0.012
Symbol
Unit (mm) Unit (inch)
A 1.68 0.066
B 1.52 0.060
C 3.93 0.155
D 2.41 0.095
E 5.45 0.215
Not Recommended
PGSMAJ10A - PGSMAJ100A
Taiwan Semiconductor
6 Version:B1805
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to
any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of
sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,
relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify TSC for any damages resulting from such improper use or sale.
Not Recommended