SMD/BLOCK Type EMI Suppression Filters EMIFIL Introduction Murata Manufacturing Co., Ltd. has been developing the EMI suppression device market since the invention of 3 terminal capacitor DS310 series in 1979. Also, we have been striving to develop and popularize new noise countermeasure technologies as well as new products in the concept of "Develop unique products," to become our customer's best solution partner. We hope you can find the key solution to your noise problem. Explanation of symbols in this catalog Features of each series Features of each item New product All Products Flow soldering available Exist in design kit Flow OK Rated current 1A or more Reflow Reflow soldering available OK Rated current 3A or more Rated current 10A or more Meets large current lines Chip Ferrite Bead Meets high frequency noise up to 1-2GHz Meets ultra high frequency noise up to 10GHz LC Combined Type Filter Low cut-off frequency type for UHF band noise, which affects digital TV tuner Chip Common Mode Choke Coil For high speed differential signal lines (USB2.0/LVDS/IEEE1394 etc.) For ultra high speed differential signal lines (HDMI/DVI/Display Port/USB3.0 etc.) Line impedance has been matched to transmission lines EU RoHS Compliant s s s All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2 CONTENTS Selection Guide for Noise Suppression Filters ************ 2 EMI Filter Selection by Application **************************** 4 aDigital Still Camera ****** 4 aBlu-ray/DVD *************** 6 aSmartphone ********* 5 aLCD-TV *************** 7 EMI Filter Selection by Circuits and Noise Frequency *** 8 BL p Chip Ferrite Bead Series Introduction ************************************************** Part Numbering ******************************************************* Series Line Up ********************************************************* Product Detail ********************************************************* !Caution/Notice ***************************************************** Soldering and Mounting ******************************************* Packaging ************************************************************** Design Kits ************************************************************* 14 16 18 24 99 100 104 105 Chip Ferrite Bead Product Guide ********************************************************* 10 p Chip Common Mode Choke Coil Series Introduction ************************************************** Part Numbering ******************************************************* Series Line Up ********************************************************* Product Detail ********************************************************* !Caution/Notice ***************************************************** Soldering and Mounting ******************************************* Packaging ************************************************************** Design Kits ************************************************************* BNX Block Type EMIFILr Series Line Up ********************************************************* Function Example *************************************************** Product Detail ********************************************************* !Caution/Notice ***************************************************** Soldering and Mounting ******************************************* Packaging ************************************************************** Design Kits ************************************************************* 170 172 174 177 203 205 212 214 Chip Common Mode Choke Coil DL p/PL 112 114 117 121 154 156 163 165 218 218 221 225 227 231 232 Block Type EMIFILr Series Introduction ************************************************** Part Numbering ******************************************************* Series Line Up ********************************************************* Product Detail ********************************************************* !Caution/Notice ***************************************************** Soldering and Mounting ******************************************* Packaging ************************************************************** Design Kits ************************************************************* Chip EMIFILr NFp Chip EMIFILr Part Numbering ******************************************************* 234 Product Detail ********************************************************* 235 Notice ******************************************************************** 238 Product Guide by Size ********************************************* 239 Part Number Quick Reference ********************************* 240 Alphabetic Product Name Index ****************************** 240 Introduction of Related Catalogs ****************************** 241 Introduction of EMI/MLCC/Inductor special web site "EMICON-FUN!" *********** 242 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Microwave Absorber EA Microwave Absorber Selection Guide for Noise Suppression Filters oFeatures & Suitable Circuits Type Features Suitable Circuits Ferrite Bead BLM/BLA Series * Miniaturized * GND connection unnecessary * Effective at low impedance line * Application set with less noise radiation * Low impedance line * Great noise suppression effect * With effect as By-Pass capacitor (Lineup for Power) * Good noise separation from signal (LC filter for Signal) * Effective at high impedance line * Application set with higher noise radiation * High impedance line * Circuit with By-Pass capacitor * Circuit driven by high frequency * Possible to suppress noise with less affect of ultra high speed signal * Great effect for common mode noise * Less magnetic saturation by current * High speed differential signal line * I/F cable driver * Power line Capacitor Type NFM/NFA/NFE/NFR/ NFL/NFW Series Common Mode Choke Coil oExample Common Mode Choke Coil Suppresses common mode noise. Ferrite Bead Inductor Suppresses differential mode noise. Common Mode Choke Coil Suppresses common mode noise. Vcc DC power supply input section USB/IEEE1394 GND Three-terminal Capacitor Suppresses differential mode noise. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2 Selection Guide for Noise Suppression Filters oAdvantages to Using Common Mode Choke Coils 1. Great Effect for Common Mode Noise Differential mode inductors work as a half impedance for common mode noise. Common Mode Choke Coils are effective for common mode noise. Ex) 2pcs of differential mode inductor Noise source Load Z ~ Z Stray capacitance N Stray capacitance Reference ground surface 2. Possible to Suppress Noise with Less Affect of Ultra High Speed Signal Common Mode Choke Coils can suppress Noise with less affect of Signal, even if the frequency range of Signal and Noise are the same, because they separate each conductive mode of current. Signal spectrum (Differential mode) Noise spectrum (Common mode) Using differential mode inductor Signal is attenuated with Noise suppression Frequency Frequency Noise is suppressed with less effect on Signal Using Common Mode Choke Coil Frequency 3. Less Magnetic Saturation by Current Common Mode Choke Coils are effective for noise suppression of DC power lines, due to their less magnetic saturation at high power current, that comes from their construction of cancelling magnetic flux of differential mode current at each coil. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 3 EMI Filter Selection by Application Digital Still Camera Application Sample IC Power Line Data Line Data Line BLM**B/BLA**B BLM**P/BLM**AX DLP0NS NFM**P* BLM**B/BLA**B p24 p27 p26 p80 p187 p26 p80 p123 Flash Memory Lens Image Sensor Controller A/D Converter Image Sensor LCD Panel LCD Controler CPU (DSP,JPEG) Speaker Lens Motor Motor Driver Audio Processer MCU USB I/F Microphone Card Slot AC Adapter Power Unit USB Differential Data Line DLM11S p185 Battery Storage Media DLP0QS/DLP0NS/11S Power Line BLM**P/BLM**AX p24 p27 NFM**P* p186 p187 p189 AC Adapter Input DLW5 p123 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4 p179 p181 EMI Filter Selection by Application Smartphone Application Sample RF Module BLM03/BLM15 LCD/Camera p27 p36 NFA18SL p145 DLP0QS p186 DLP0NS/DLP1ND/DLP11S p187 p189 p193 WiFi BT Touch Panel LCD Monitor SIM Slot Micro SD Slot GPS LCD Driver Camera Module Cellular RF ACPU Cellular BB Audio IC Speaker D/D Converter Mic Flash Memory Power Management IC NFC DRAM USB Battery IC Power Line Audio Line USB NFM15PC/NFM18PC BLM02/03 DLP0QS p186 DLP0NS p187 p123 p126 BLM15P/BLM18KG p36 p52 p24 p27 DLM11G p184 DLP11S/11R/11T p189 p190 p191 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5 EMI Filter Selection by Application Blu-ray/DVD Application Sample IC Power Line BLM18P/18K/18EG/21P Data Line p50 p52 p66 p96 BLM15B/15H/15G p44 p88 p91 NFM18PS/18PC p125 p126 Control Panel BLA p80 Optical Drive Clock Line Digital Board BLM**B Panel Controller NFL18ST/18SP/NFL21SP System Control Memory p26 p141 p144 CLK System Processor Imaging Processor to Power Supply Power Line CLK Audio Line Video Line Data Line Power Line Audio AD/DAC Video Encoder Decoder 1394 Transceiver Demodulatio IC Power Line BLM18P/18K/18EG HDMI Transmitter Analog Board NFM**P* p123 DLW5 p179 p181 TV Tuner Head Phone IEEE1394 DLM11S HDMI p185 DLP11S/DLP2AD p189 p194 DLP11S/DLP2AD p189 p194 DLW21 p197 Video DLW21 p197 Audio BLM**B/BLA**B DLM11G p26 p80 NFL18ST/18SP/NFL21SP p141 p144 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 p50 p52 p96 p184 EMI Filter Selection by Application LCD-TV Application Sample RSDS Line DLM11S p185 LVDS RSDS DLP11S/DLP2AD p189 p194 Display Signal Processing LVDS Line Resalution Convert Gray-Scale Voltage Generater Timing Controller Scaler DLM11S p185 Frame Memory IP Convert DLP11S/DLP2AD p189 p194 Source Driver Gate Driver Display Audio Processor Picture Processing Engine Audio IN/OUT Audio Power Amp A/D Convert Back Light Video Decoder Backlight Up Convert Panel AC Converter Audio Line Picture Processing Environment IC Tuner (BS/CS/UHF) Analog I/O (RGB Composite) Digital I/O (DVI, iLink/HDMI) DLW5 p179 p181 Power Line Digital I/O IC Power Line NFM18PS/18PC DLM11S p125 p126 AC IN DLP11S/DLP2AD p189 p194 BLM18P/18K/18EG p50 p52 p96 p185 DLW21S p197 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 7 EMI Filter Selection by Circuits and Noise Frequency oChip Ferrite Bead / Chip EMIFILr Circuit Type? General Signal Line Power Line High Speed Signal Line Under 10MHz Over 10MHz BLM02BX p24 BLM02AX BLM03AX BLM03B p30 p27 0201(0603)/0.75-0.9A/Imp.22-33 Low DC Resistance / High Current Type p28 Inductor Type (Suppression Effect: Normal) Noise Frequency: Under 1GHz 0201(0603)/1-1.8A/Imp.22-80 BLM03AG p32 BLM15AG p42 0402(1005)/Imp.10-1000 p36 0402(1005)/0.9-3A/Imp.33-600 BLM15PG/PD BLM21A p66 BLM21R p75 0805(2012)/Imp.120-1000 Array Type 1206(3216)/1.5-6A/Imp.33-600 BLA2AA p77 BLM41P p79 BLE32P 0805(2012)/Imp.5-2700 Array Type p80 BLA2AB p63 0804(2010)/Imp.10-1000 p83 BLA31B p68 1206(3216)/Imp.120-1000 0805(2012)/Imp.120-1000 0805(2012)/1.5-6A/Imp.22-330 BLM31P BLM18R p50 0603(1608)/0.5-3A/Imp.30-470 BLM21P p62 0603(1608)/Imp.120-1000 0402(1005)/1-2.2A/Imp.10-120 BLM18P BLM18T p70 BLM21B p40 0603(1608)/Imp.120-1000 p38 p58 BLM18B 0603(1608)/Imp.5-2500 0402(1005)/0.35-1.74A/Imp.10-1000 BLM15PX p46 BLM15B 0402(1005)/Imp.5-1800 p56 0603(1608)/Imp.120-1000 BLM15AX p44 BLM15BX 0402(1005)/0.25-0.6A/Imp.75-1800 0201(0603)/Imp.10-1000 BLM18A 1806(4516)/1.5-6A/Imp.60-1000 p73 p80 0804(2010)/Imp.120-1000 BLA31A p83 1206(3216)/Imp.30-1000 1210(3225)/10A/Imp.30 Low DC Resistance Type BLM18K p52 0603(1608)/1.3-6A/Imp.26-600 p54 BLM18S 0603(1608)/1.5-6A/Imp.26-330 NFM15PC p123 0402(1005)/Cap.0.047-4.3F NFM18PC p126 0603(1608)/2-4A/Cap.0.1-2.2F Capacitor Type (Suppression Effect: High) Noise Frequency? BLM03PX p34 0201(0603)/Imp.10-600 0201(0603)/0.2-1A/Imp.10-1000 BLM03PG p26 01005(0402)/Imp.150 01005(0402)/Imp.10-120 NFM21PC NFM31KC p130 NFM3DCC p131 NFM41CC p132 1806(4516)/Cap.22-22000pF Array Type p133 NFA31CC NFE61PT p122 p121 p152 p153 1206(3216)/6.8-100/Cap.10-100pF NFA18SL/NFA18SD p145 NFA21SL p148 0603(1608)/Cut off 50-480MHz p147 2706(6816)/2A/Cap.33-4700pF Block Type 0805(2012)/Cut off 50-330MHz p221 BNX022/023 p150 0805(2012)/22-100/Cap.10-100pF Array Type (RC/LC Combined) NFA31GD p122 2706(6816)/Cap.33-4700pF p144 1206(3216)/Cut off 10-500MHz RC Combined NFR21GD 1206(3216)/Cap.22-2200pF p143 0805(2012)/Cut off 10-500MHz NFW31SP p139 p141 0603(1608)/Cut off 150-500MHz NFL21SP p138 p140 0603(1608)/Cut off 50-500MHz NFL18SP p137 1206(3216)/Cap.22-22000pF T Circuit Filter Feed Through Type NFE31PT p121 1206(3216)/6A/Cap.22-2200pF NFE61PT NFL18ST p136 1205(3212)/Cap.22-22000pF 1806(4516)/2-6A/Cap.0.2-1.5F T Circuit Filter Feed Through Type NFE31PT p135 0805(2012)/Cap.22-22000pF 1206(3216)/6-10A/Cap.0.01-0.1F NFM41PC NFM18CC 0402(1005)/Cut off 150-500MHz NFM21CC 1206(3216)/6A/Cap.27F LC Combined NFL15ST p129 1205(3212)/2A/Cap.0.022F NFM31PC p134 0402(1005)/Cap.2200-22000pF 0603(1608)/Cap.22-22000pF 0805(2012)/2-6A/Cap.0.1-4.7F NFM3DPC NFM15CC 10-15A p85 Inductor Type (Suppression Effect: Normal) 0201(0603)/Imp.600-1200 BLM15HG BLM18HG p88 p92 BLM03HB p85 BLM15HD p88 0402(1005)/Imp.600-1800 p92 0603(1608)/Imp.330-1000 BLM15HB p88 0402(1005)/Imp.120-220 BLM18HD p92 0603(1608)/Imp.470-1000 BLM18HE BLM18HE p92 BLM03E BLM18HB p87 0201(0603)/0.4-0.6A/Imp.25-50 BLM15E p92 0603(1608)/Imp.600-1500 0603(1608)/0.5-0.8A/Imp.600-1500 p92 0603(1608)/Imp.120-330 p90 0402(1005)/0.7-1.5A/Imp.120-220 p96 0603(1608)/0.5-2A/Imp.100-600 NFM18PS LC Combined p125 NFL18ST 0603(1608)/2A/Cap.0.47-1.0F NFM21PS p141 0603(1608)/Cut off 50-500MHz Array Type (LC Combined) p128 0805(2012)/4A/Cap.10F NFA18SL/NFA18SD p145 NFA21SL p148 0603(1608)/Cut off 50-480MHz p147 0805(2012)/Cut off 50-330MHz BLM15GG p91 0402(1005)/Imp.220-470 BLM18G BLM15GA 0402(1005)/Imp.75 p98 0603(1608)/Imp.470 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 8 p85 0201(0603)/Imp.190 0603(1608)/Imp.470-1000 BLM18HK BLM03HD 0201(0603)/Imp.330-1000 0402(1005)/Imp.600-1000 BLM18E Inductor Capacitor Type Type (Suppression Effect: High) Noise Frequency: High-GHz Band (1GHz to 10GHz) Noise Frequency: GHz Band (800MHz to 2.5GHz) BLM03HG p91 EMI Filter Selection by Circuits and Noise Frequency oChip Common Mode Choke Coil Circuit Type? High Speed Differential Signal Line DC Power Line High Speed Signal Line Ultra High Speed Signal Line (USB/LVDS/IEEE1394/mipi etc.) (HDMI/DVI/Display Port etc.) p177 DLW5AH 2014(5036)/0.2A/Imp.4000 p179 DLW5AT 2014(5036)/1-6A/Imp.50-2700 p177 DLW5BS 2020(5050)/0.5-5A/Imp.190-3000 p179 DLW5BT 2020(5050)/1.5-6A/Imp.100-1400 High Current Type Automotive Available p202 PLT10HH 12.9mmx6.6mm /6-18A/Imp.45-1000 DLM11S p185 DLP0QSN 025020(0605)/Imp.7-35 p186 03025(0806)/Imp.7-15 p187 DLP11SN 0504(1210)/Imp.35-90 p189 p189 p179 2020(5050)/1.5-6A/Imp.100-1400 0504(1210)/Imp.80 p199 DLW21S_HQ p197 0805(2012)/Imp.67-120 Array Type p197 0805(2012)/Imp.67-500 DLP31S DLW5BT p189 DLP11TB 0805(2012)/Imp.67-180 DLW21S_S/X p179 0504(1210)/Imp.15-40 0504(1210)/Imp.45 DLW21H DLW5AT p189 DLP11RB 0504(1210)/Imp.67-330 DLP11RN p184 2014(5036)/1-6A/Imp.50-2700 p189 DLP11SA 03025(0806)/Imp.28-120 DLM11G 0504(1210)/Imp.600 p187 DLP0NSA 025020(0605)/Imp.60 DLP0NSC/SN p186 DLP0QSA 0504(1210)/Imp.45-90 Audio Line p194 DLP2ADA p192 0804(2010)/Imp.35-90 1206(3216)/Imp.120-550 DLW31S p200 1206(3216)/Imp.90-2200 Automotive Available DLW43S p201 1812(4532) Array Type DLP1ND p193 05025(1506)/Imp.35-90 DLP2ADN p194 0804(2010)/Imp.67-280 DLP31D p196 1206(3216)/Imp.90-440 Guide of Digits in this Chart: ofor BLM03P ofor NFA18S 0201(0603)/0.75-0.9A/Imp.22-33 Size (inch) Size Rated Current (mm) Impedance 0603(1608)/Cut off 50-480MHz Size (inch) ofor BNX022/023 Size (mm) Cut-off Frequency ofor DLW5BS 10-15A/Range1MHz-2GHz Rated Current Effective Frequency Range 2020(5050)/0.5-5A/Imp.190-3000 Size (inch) Size Rated Current Impedance (mm) ofor NFR21GD 0805(2012)/22-100/Cap.10-100pF Size (inch) Size (mm) Resistance Capacitance !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 9 Product Guide BL p Inductor Type For General Signal Lines Signal Lines Type BLM02AX BLM03AX BLM15AX BLM03AG BLM15AG BLM18A BLM21A BLM18T p24 p30 p40 p32 p42 p56 p68 p62 BLA2AA p80 BLA31A p83 (4 circuits array) (4 circuits array) For Digital Interface For High Speed Signal Lines Lines For General Band Noise Universal Type [ Power Lines / Signal Lines ] Series BLM02BX BLM03B BLM15B BLM18B BLM21B p34 p44 p58 p70 BLA2AB p80 BLA31B p83 (4 circuits array) (4 circuits array) BLM18R BLM21R BLM03PX* BLM03PG BLM15P* Power Lines Type p26 BLM18P* BLM21P* BLM31P* BLM41P* p63 p73 p28 p27 p36 p50 p66 p75 p77 BLM18K* p52 BLM18S* p54 (Low DC Resistance Type) (Low DC Resistance Type) BLM03E* BLM15E* BLM18EG* BLM18HE* BLM03HG BLM03HD BLM03HB Signal Lines Type For GHz Band Noise Universal Type [ Power Lines / Signal Lines ] BLE32P BLM15HG BLM15HD BLM15HB BLM18HG BLM18HD BLM18HB Signal Lines Type For High-GHz Band Noise BLM18HK BLM15GG BLM15GA BLM18G p79 p87 p90 p96 p92 p85 p85 p85 p88 p88 p88 p92 p92 p92 p92 p91 p91 p98 Effective Frequency Range Impedance () at 100MHz Size Code in inch (in mm) 10 01005 (0402) 10 0201 (0603) 10 0402 (1005) 10 0201 (0603) 0402 (1005) 100 70 120 80 120 70 30 (Applicable Frequency Ranges are only for reference.) 1000 240 120 10 80 70 120 10 70 600 1000 600 1000 220 240 120 600 1000 600 1000 220 220 470 330 120 150 600 1000 220 470 120 150 330 600 1000 0603 (1608) 0805 (2012) 0603 (1608) 120 220 600 1000 0804 (2010) 120 220 600 1000 120 220 600 1000 1206 (3216) 30 60 150 01005 (0402) 33 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0804 (2010) 56 80 75 120 10 22 5 10 22 5 10 22 75 75 47 60 75 60 22 47 47 47 33 5 10 75 1206 (3216) 0603 (1608) 0805 (2012) 0201 (0603) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1806 (4516) 0603 (1608) 0603 (1608) 1210 (3225) 0201 (0603) 120 600 470 1000 600 470 1000 220 120 220 33 (1.5A) 22 (1.8A) 80 (1A) 33 (0.75A) 22 (0.9A) 33 (3A) 80 (1.5A/2.3A)180 (1.5A) 220 (1.4A) 470 (1A) 10 (1A) 30 (2.2A) 60 (1.7A/2.5A) 120 (1.3A/2A) 330 (1.2A) 600 (0.9A) 33 (3A) 120 (2A) 220 (1.4A) 470 (1A) 30 (1A) 60 (0.5A) 180 (1.5A) 330 (1.2A) 30 (4A) 220 (2A) 22 (6A) 60 (3.5A) 120 (3A) 330 (1.5A) 50 (3.5A) 390 (2A) 33 (6A) 120 (3.5A) 600 (1.5A) 75 (3.5A) 470 (2A) 60 (6A) 180 (3.5A) 1000 (1.5A) 220 (2.2A) 470 (1.5A) 30 (5A) 70 (3.5A) 26 (6A) 100 (3A) 120 (3A) 330 (1.7A) 600 (1.3A) 70 (4A) 220 (2.5A) 26 (6A) 120 (3A) 330 (1.5A) 30 25 (0.6A) 50 (0.4A) 220 (0.7A) 120 (1.5A) 0402 (1005) 0603 (1608) 600 240 470 600 1800 240 470 1000 120 220 420 600 1500 2200 140 220 330 470 120 150 1000 1800 2500 200 330 470 750 1500 2200 2700 120 150 220 420 600 1000 1800 2250 600 120 220 470 1000 600 470 1000 120 220 120 (2A) 330 (0.5A) 470 (0.5A) 100 (2A) 220 (2A/1A) 390 (0.5A) 600 (0.5A) 1000 (0.6A) 600 (0.8A) 1500 (0.5A) 1000 600 1200 0603 (1608) 0201 (0603) 600 330 470 1000 0201 (0603) 0201 (0603) 190 0402 (1005) 600 1000 0402 (1005) 600 1000 1800 120 0402 (1005) 220 0603 (1608) 600 470 1000 0603 (1608) 600 470 1000 0603 (1608) 120 220 330 600 330 470 1000 0603 (1608) 220 0402 (1005) 0402 (1005) 0603 (1608) 470 75 470 * The derating of rated current is required for some items according to the operating temperature on each product page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 10 10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz Product Guide NFp Capacitor Type Signal Lines Type NFM15CC NFM18CC NFM21CC NFM3DCC NFM41CC NFA31CC p134 p135 p136 p137 p138 p139 (4 circuits array) NFM15PC Power Lines Type NFM18PS NFM18PC NFM21PS NFM21PC NFM3DPC* NFM31PC NFM31KC* Universal Type [ Power Lines / Signal Lines ] NFM41PC NFE31PT NFE61PT p123 p125 p126 p128 p129 p130 p131 p132 p133 p121 p122 NFp LC(RC) Combined Type NFL18ST Signal Lines Type NFL18SP NFL21SP p140 p141 p143 p144 NFA18SL p145 NFA18SD p147 NFA21SL p148 (4 circuits array) (4 circuits array) (4 circuits array) NFW31SP NFR21GD NFA31GD (4 circuits array) p150 p152 p153 1000p 10000p 2200 22 47 0805 (2012) 22 47 1205 (3212) 22 47 1806 (4516) 22 47 1206 (3216) 22 47 (Applicable Frequency Ranges are only for reference.) 0.1 1 22000 22000 22000 22000 47000 0.22 1.0 0.47 4.3 0.1 1.0 0.47 0.22 1.0 0.1 0.47 2.2 0603 (1608) 0603 (1608) 10 0805 (2012) 0.22 1.0 4.7 0.47 0.1 2.2 0805 (2012) 22000 1205 (3212) 27 1206 (3216) 10000 22000 0.1 15000 1206 (3216) 0.2 1806 (4516) 1.5 470 2200 1500 22 47 100 220 100 360 1000 33 68 180 680 4700 1206 (3216) 2706 (6816) 50 0603 (1608) 70 500 100 150 0603 (1608) 20 0603 (1608) 50 50 0603 (1608) 0805 (2012) 50 10 (Applicable Frequency Ranges are only for reference.) 100 150 10 Effective Frequency Range Cut-off Frequency (MHz) 0402 (1005) 1206 (3216) 10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz 22000 0402 (1005) 0805 (2012) 10 22000 470 2200 100 220 1000 470 2200 100 220 1000 470 2200 100 220 1000 470 2200 100 220 1000 470 2200 100 220 1000 Size Code in inch (in mm) 10 Series NFL15ST 100p 0402 (1005) 0603 (1608) Effective Frequency Range Capacitance (F) Size Code in inch (in mm) 10p Series 20 50 200 300 10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz 500 200 300 500 200 300 500 500 200 300 400 400 200 130 180 220 300 350 480 200 180 280 310 80 200 300 330 400 100 150 200 300 500 70 100 150 0805 (2012) 1206 (3216) * The derating of rated current is required for some items according to the operating temperature on each product page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 11 Product Guide DL p For Audio Lines Common Mode Choke Coils DLM11G DLP0QSN DLP0QSA DLP0NSC DLP0NSN Signal Lines Type For Ultra High Speed Signal Lines DLP0NSA DLP11SN DLP11SA DLP11RN DLP11RB DLP11TB DLP31S p185 p186 p186 p187 p187 p187 p189 p189 p190 p190 p191 p192 DLP1NDN p193 DLP2ADA p194 DLP2ADN p194 DLP31DN p196 (2 circuits array) (2 circuits array) (2 circuits array) DLW21S DLW21H DLW31SN Universal Type [ Power Lines / Signal Lines ] DLW43SH p197 p199 p200 p201 p177 DLW5AH / DLW5BS* p179 DLW5AT*/DLW5BT* PL p Large Current Type for Automotive Available BNX022* SMD Type 100kHz 1MHz 10MHz 100MHz 1GHz BNX023* BNX024* BNX025* BNX002 BNX003 BNX005 BNX012* BNX016* 45 90 0504 (1210) 60 025020 (0605) 15 025020 (0605) 7 35 03025 (0806) 28 03025 (0806) 35 90 120 67 15 03025 (0806) 7 0504 (1210) 0504 (1210) 240 200 280 330 67 0504 (1210) 90 120 160 35 90 67 45 0504 (1210) 15 40 80 0504 (1210) 120 1206 (3216) 05025 (1506) 0804 (2010) 0804 (2010) 35 0805 (2012) 550 67 35 90 67 240 200 280 90 120 160 67 90 1206 (3216) 0805 (2012) 220 90 200 130 320 440 90 67 120 180 260 370 490 500 90 120 67 90 1206 (3216) 180 160 260 600 1000 2200 1812 (4532) 2014 2020 (5036) (5050) 2014 2020 (5036) (5050) 190 50 110 100 150 230 250 500 350 600 330 500 400 1500 4000 1000 3000 1000 1400 850 1100 2700 800 Common Mode Impedance () at 10MHz 100 500 1000 500 900 1000 Effective Frequency Range (Applicable Frequency Ranges are only for reference.) 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz - p221 p221 p221 p221 p223 p223 p223 p224 p224 45 400 100 Height (mm) Rated Voltage (Vdc) Rated Current (A) 3.1 50 10 3.1 100 15 3.5 50 15 3.5 25 15 13 max. 50 10 13 max. 150 10 13.5 max. 50 15 8.5 max. 50 15 8.5 max. 25 15 Effective Frequency Range (Applicable Frequency Ranges are only for reference.) * The derating of rated current is required for some items according to the operating temperature on each product page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 12 10GHz p202 PLT10HH* Series Lead Type Effective Frequency Range (Applicable Frequency Ranges are only for reference.) 1000 600 Size Code in inch (in mm) Series BNX Power Lines Type 500 0504 (1210) (2 circuits array) Block EMIFILr 100 p184 DLM11S Large Current Common Mode Choke Coil for Automotive Available Common Mode Impedance () at 100MHz Size Code in inch (in mm) Series 10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz Chip Ferrite Bead BL p Series Introduction 14 Part Numbering 16 Series Line Up 18 Product Detail 24 !Caution/Notice 99 100 Packaging 104 Design Kits 105 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Soldering and Mounting Chip EMIFILr Chip Ferrite Bead !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BL p Series Introduction sExample of Chip Ferrite Bead BLM Series Structure Inner Electrode Chip Ferrite Bead Outer Electrode Ferrite Sheet Through Hole Chip EMIFILr Cross Section Up Classification of sLine Chip Ferrite Bead Meets High-GHz Band Noise 1600 High-GHz Band Impedance () Chip Common Mode Choke Coil 1400 BLM_G Series 1200 1000 800 600 400 High s'! FOR HIGH SPEED SIGNAL LINES s'' FOR GENERAL SIGNAL LINES 200 0 1 10 100 1000 Frequency (MHz) BLM_H Series GHz Band Block Type EMIFILr Noise Frequency Band s("($(% FOR HIGH SPEED SIGNAL LINES s('(+ FOR GENERAL SIGNAL LINES s%' FOR GENERAL SIGNAL LINES s%" FOR GENERAL SIGNAL LINES FOR POWER LINES BLM standard line up BLE/BLM_P/BLM_K Series (for Power Lines) s2+ FOR DIGITAL INTERFACES s!' FOR GENERAL SIGNAL LINES s"p FOR HIGH SPEED SIGNAL LINES s",-?0+ ,ARGE CURRENT AVAILABLE UP TO ! s",% ,ARGE CURRENT AVAILABLE UP TO ! s!8 FOR GENERAL SIGNAL LINES POWER LINES Low Microwave Absorber BLM_E Series Small Rated Current (Less than 1A) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 14 Large (1A and more) 10000 BLp Series Introduction sDifference between BLM A type and B type (HG type vs HD/HB/HE type) cComparison of Resistance Element cComparison of Impedance Curve 1200 1200 600 900 R () BLM18AG601SN1 300 600 BLM18AG601SN1 300 1 10 100 0 1000 Frequency (MHz) 1 10 100 1000 Chip EMIFILr Z () BLM18BD601SN1 BLM18BD601SN1 900 0 Chip Ferrite Bead A type: Impedance curve rises from low frequency range. Suppresses noise in a wide frequency range. B type: Impedance curve rises sharply. Less damage to signal waveforms. Frequency (MHz) cComparison of Test Effect (25MHz) 29.7cm 1cm Ferrite Bead 7cm 25MHz OSC 74HC04 Waveform test point Chip Common Mode Choke Coil Test Circuit 74HC04 Pattern width 0.15cm Line impedance 127 74HC00 Both side glass epoxy PCB(4.7) All of back side is GND PCB thickness=0.6mm BLM_B Series has less damage to high speed signal waveform. BLM18AG601SN1 BLM18BD601SN1 Small Distortion Spectrum has been reduced from low frequency range. Noise frequency has been reduced without reducing signals of low frequency. Block Type EMIFILr No filter Waveform Microwave Absorber Spectrum !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 15 BL p (Part Number) Part Numbering Chip Ferrite Bead BL M 18 AG 102 q w e r t S N 1 D y u i o tImpedance Expressed by three figures. The unit is in ohm () at 100MHz. The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. qProduct ID Product ID Chip Ferrite Bead BL Chip Ferrite Beads yElectrode wType Expressed by a letter. Code Type A Array Type Code Electrode E DC Bias Characteristics Improved Type S/T Sn Plating M Ferrite Bead Single Type A Au Plating Ex.) Chip Common Mode Choke Coil Chip EMIFILr eDimensions (LgW) uCategory Code Dimensions (LgW) EIA Code Category 02 0.4g0.2mm 01005 N Standard Type 03 0.6g0.3mm 0201 15 1.0g0.5mm 0402 18 1.6g0.8mm 0603 Code 2A 2.0g1.0mm 0804 1 1 Circuit 21 2.0g1.25mm 0805 4 4 Circuits 31 3.2g1.6mm 1206 32 3.2g2.5mm 1210 41 4.5g1.6mm 1806 iNumber of Circuits Number of Circuits rCharacteristics/Applications Code *1 Characteristics/Applications AG AX For General Use TG BLM18 BLM15/18 BC BLM03/15/18/21, BLA2A For High-speed Signal Lines BLM03/15 BD BLM03/15/18/21, BLA2A/31 BX BLM02/15 PD BLM15 PG Block Type EMIFILr BLM02/03/15 BA BB PN For Power Lines PX KG SG BLM03/15/18/21/31/41 BLE32 BLM03/15 For Power Lines (Low DC Resistance Type) BLM18 BLM18/21 RK For Digital Interface HG For GHz Band General Use EB For GHz Band High-speed Signal Lines (Low Direct Current Type) BLM03 EG For GHz Band General Use (Low DC Resistance Type) BLM15/18 HB HD Microwave Absorber Series BLM03/15/18/21, BLA2A/31 BLM03/15/18 BLM03/15/18 For GHz Band High-speed Signal Lines HE BLM03/15/18 BLM18 HK For GHz Band Digital Interface BLM18 GA For High-GHz Band High-speed Signal Lines BLM15 GG For High-GHz Band General Use BLM15/18 *1 Frequency characteristics vary with each code. Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 16 BLp Chip Ferrite Bead Part Numbering oPackaging Packaging K Embossed Taping (o330mm Reel) L Embossed Taping (o180mm Reel) Series BLE, BLM21 *1/31/41 B Bulk J Paper Taping (o330mm Reel) BLM03/15/18 *3/21 *2, BLA2A/31 D Paper Taping (o180mm Reel) BLM02/03/15/18/21 *2, BLA2A/31 All Series Chip Ferrite Bead Code *1 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr BLM21BD222SN1/BLM21BD272SN1 only. *2 Except for BLM21BD222SN1/BLM21BD272SN1 *3 Except for BLM18T !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 17 BL p Size Code Thickness in inch (in mm) (mm) Chip EMIFILr Chip Ferrite Bead 01005 (0402) Block Type EMIFILr Chip Common Mode Choke Coil 0201 (0603) Microwave Absorber 0402 (1005) 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Series Line Up Chip Ferrite Bead Type Part Number p24 Universal Type [Power lines/Signal lines] For High Speed Signal Lines p26 p32 For General Signal Lines p30 Universal Type [Power lines/Signal lines] p34 For High Speed Signal Lines (Sharp Impedance Curve) p27 For Power Lines p28 p85 For General Signal Lines For GHz Band Noise Universal Type p87 [Power lines/Signal lines] p85 For High Speed Signal Lines p42 For General Signal Lines p40 Universal Type [Power lines/Signal lines] BLM02AX100SN1 BLM02AX700SN1 BLM02AX121SN1 BLM02BX151SN1 BLM03AG100SN1 BLM03AG700SN1 BLM03AG800SN1 BLM03AG121SN1 BLM03AG241SN1 BLM03AG601SN1 BLM03AG102SN1 BLM03AX100SN1 BLM03AX800SN1 BLM03AX121SN1 BLM03AX241SN1 BLM03AX601SN1 BLM03AX102SN1 BLM03BD750SN1 BLM03BD121SN1 BLM03BD241SN1 BLM03BD471SN1 BLM03BD601SN1 BLM03BB100SN1 BLM03BB220SN1 BLM03BB470SN1 BLM03BB750SN1 BLM03BB121SN1 BLM03BC330SN1 BLM03BC560SN1 BLM03BC800SN1 BLM03PG220SN1 BLM03PG330SN1 BLM03PX220SN1 BLM03PX330SN1 BLM03PX800SN1 BLM03HG601SN1 BLM03HG102SN1 BLM03HG122SN1 BLM03EB250SN1 BLM03EB500SN1 BLM03HD331SN1 BLM03HD471SN1 BLM03HD601SN1 BLM03HD102SN1 BLM03HB191SN1 BLM15AG100SN1 BLM15AG700SN1 BLM15AG121SN1 BLM15AG221SN1 BLM15AG601SN1 BLM15AG102SN1 BLM15AX100SN1 BLM15AX300SN1 BLM15AX700SN1 BLM15AX121SN1 BLM15AX221SN1 BLM15AX601SN1 BLM15AX102SN1 Impedance at 100MHz/20C at 1GHz/20C 10ohm5ohm 70ohm25% 120ohm25% 150ohm25% 10ohm(Typ.) 70ohm(Typ.) 80ohm25% 120ohm25% 240ohm25% 600ohm25% 1000ohm25% 10ohm(Typ.) 80ohm25% 120ohm25% 240ohm25% 600ohm25% 1000ohm25% 75ohm25% 120ohm25% 240ohm25% 470ohm25% 600ohm25% 10ohm25% 22ohm25% 47ohm25% 75ohm25% 120ohm25% 33ohm25% 56ohm25% 80ohm25% 22ohm25% 33ohm25% 22ohm25% 33ohm25% 80ohm25% 600ohm25% 1000ohm40% 1000ohm25% 1800ohm40% 1200ohm25% 2000ohm40% 25ohm25% 105ohm40% 50ohm25% 255ohm40% 750ohm40% 330ohm25% 1000ohm40% 470ohm25% 1500ohm40% 600ohm25% 2300ohm40% 1000ohm25% 1150ohm40% 190ohm25% 10ohm(Typ.) 70ohm(Typ.) 120ohm25% 220ohm25% 600ohm25% 1000ohm25% 10ohm5ohm 30ohm25% 70ohm25% 120ohm25% 220ohm25% 600ohm25% 1000ohm25% Rated Current 750mA 300mA 250mA 200mA 500mA 200mA 200mA 200mA 200mA 100mA 100mA 1000mA 500mA 450mA 350mA 250mA 200mA 300mA 250mA 200mA 215mA 200mA 300mA 200mA 200mA 200mA 100mA 150mA 100mA 100mA 900mA 750mA 1800mA 1500mA 1000mA 150mA 125mA 100mA 600mA 400mA 200mA 175mA 150mA 120mA 150mA 1000mA 600mA 550mA 450mA 300mA 300mA 1740mA 1100mA 780mA 700mA 600mA 500mA 350mA Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 18 BLp Chip Ferrite Bead Series Line Up Chip Ferrite Bead BLM15BX750SN1 BLM15BX121SN1 BLM15BX221SN1 BLM15BX471SN1 BLM15BX601SN1 BLM15BX102SN1 BLM15BX182SN1 p46 BLM15BD750SN1 BLM15BD121SN1 BLM15BD221SN1 BLM15BD471SN1 BLM15BD601SN1 BLM15BD102SN1 BLM15BD182SN1 For High Speed Signal Lines BLM15BB050SN1 (Sharp Impedance Curve) BLM15BB100SN1 BLM15BB220SN1 BLM15BB470SN1 BLM15BB750SN1 BLM15BB121SN1 BLM15BB221SN1 BLM15BC121SN1 BLM15BC241SN1 BLM15BA050SN1 BLM15BA100SN1 BLM15BA220SN1 BLM15BA330SN1 BLM15BA470SN1 BLM15BA750SN1 p36 BLM15PX330SN1 BLM15PX600SN1 BLM15PX800SN1 BLM15PX121SN1 BLM15PX181SN1 BLM15PX221SN1 BLM15PX331SN1 For Power Lines BLM15PX471SN1 BLM15PX601SN1 p38 BLM15PG100SN1 BLM15PD300SN1 BLM15PD600SN1 BLM15PD800SN1 BLM15PD121SN1 p88 BLM15HG601SN1 For General Signal Lines BLM15HG102SN1 p88 BLM15HD601SN1 BLM15HD102SN1 For High Speed For GHz Signal Lines BLM15HD182SN1 Band Noise (Sharp Impedance Curve) BLM15HB121SN1 BLM15HB221SN1 p90 BLM15EG121SN1 Universal Type [Power Lines/Signal Lines] BLM15EG221SN1 p91 BLM15GG221SN1 For High-GHz For General Signal Lines BLM15GG471SN1 Band Noise For High Speed Signal Lines p91 BLM15GA750SN1 Rated Current 600mA 600mA 450mA 350mA 350mA 300mA 250mA 300mA 300mA 300mA 200mA 200mA 200mA 100mA 500mA 300mA 300mA 300mA 300mA 300mA 200mA 350mA 250mA 300mA 300mA 300mA 300mA 200mA 200mA 3000mA 2500mA 2300mA 2000mA 1500mA 1400mA 1200mA 1000mA 900mA 1000mA 2200mA 1700mA 1500mA 1300mA 300mA 250mA 300mA 250mA 200mA 300mA 250mA 1500mA 700mA 300mA 200mA 200mA Chip EMIFILr p44 Impedance at 100MHz/20C at 1GHz/20C 75ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% 1800ohm25% 75ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% 1800ohm25% 5ohm25% 10ohm25% 22ohm25% 47ohm25% 75ohm25% 120ohm25% 220ohm25% 120ohm25% 240ohm25% 5ohm25% 10ohm25% 22ohm25% 33ohm25% 47ohm25% 75ohm25% 33ohm25% 60ohm25% 80ohm25% 120ohm25% 180ohm25% 220ohm25% 330ohm25% 470ohm25% 600ohm25% 10ohm(Typ.) 30ohm25% 60ohm25% 80ohm25% 120ohm25% 600ohm25% 1000ohm40% 1000ohm25% 1400ohm40% 600ohm25% 1400ohm40% 1000ohm25% 2000ohm40% 1800ohm25% 2700ohm40% 120ohm25% 500ohm40% 220ohm25% 900ohm40% 120ohm25% 145ohm(Typ.) 220ohm25% 270ohm(Typ.) 220ohm25% 600ohm40% 470ohm25% 1200ohm40% 75ohm25% 1000ohm40% Chip Common Mode Choke Coil Part Number Block Type EMIFILr 0402 (1005) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Type Microwave Absorber Size Code Thickness in inch (in mm) (mm) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 19 BLp Chip Ferrite Bead Series Line Up Chip EMIFILr Chip Ferrite Bead Size Code Thickness in inch (in mm) (mm) Block Type EMIFILr Chip Common Mode Choke Coil 0603 (1608) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Part Number Type p56 For General Signal Lines p62 p58 For High Speed Signal Lines (Sharp Impedance Curve) p63 For Digital Interface Lines BLM18AG121SN1 BLM18AG151SN1 BLM18AG221SN1 BLM18AG331SN1 BLM18AG471SN1 BLM18AG601SN1 BLM18AG102SN1 BLM18TG121TN1 BLM18TG221TN1 BLM18TG601TN1 BLM18TG102TN1 BLM18BD470SN1 BLM18BD121SN1 BLM18BD151SN1 BLM18BD221SN1 BLM18BD331SN1 BLM18BD421SN1 BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1 BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1 BLM18BD252SN1 BLM18BB050SN1 BLM18BB100SN1 BLM18BB220SN1 BLM18BB470SN1 BLM18BB600SN1 BLM18BB750SN1 BLM18BB121SN1 BLM18BB141SN1 BLM18BB151SN1 BLM18BB221SN1 BLM18BB331SN1 BLM18BB471SN1 BLM18BA050SN1 BLM18BA100SN1 BLM18BA220SN1 BLM18BA470SN1 BLM18BA750SN1 BLM18BA121SN1 BLM18RK121SN1 BLM18RK221SN1 BLM18RK471SN1 BLM18RK601SN1 BLM18RK102SN1 Impedance at 100MHz/20C at 1GHz/20C 120ohm25% 150ohm25% 220ohm25% 330ohm25% 470ohm25% 600ohm25% 1000ohm25% 120ohm25% 220ohm25% 600ohm25% 1000ohm25% 47ohm25% 120ohm25% 150ohm25% 220ohm25% 330ohm25% 420ohm25% 470ohm25% 600ohm25% 1000ohm25% 1500ohm25% 1800ohm25% 2200ohm25% 2500ohm25% 5ohm25% 10ohm25% 22ohm25% 47ohm25% 60ohm25% 75ohm25% 120ohm25% 140ohm25% 150ohm25% 220ohm25% 330ohm25% 470ohm25% 5ohm25% 10ohm25% 22ohm25% 47ohm25% 75ohm25% 120ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% Rated Current 500mA 500mA 500mA 500mA 500mA 500mA 400mA 200mA 200mA 200mA 100mA 500mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 100mA 50mA 50mA 50mA 50mA 700mA 700mA 600mA 550mA 550mA 500mA 500mA 450mA 450mA 450mA 400mA 300mA 500mA 500mA 500mA 300mA 300mA 200mA 200mA 200mA 200mA 200mA 200mA Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 20 BLp Chip Ferrite Bead Series Line Up For Power Lines Low DC Resistance Type p54 p92 For General Signal Lines p92 For High Speed Signal Lines (Sharp Impedance Curve) For GHz Band Noise p92 For Digital Interface Lines p96 Universal Type [Power lines/ Signal lines] For High-GHz Band Noise p98 p68 For General Signal Lines Chip Ferrite Bead p52 Chip EMIFILr Standard Type BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1 BLM18PG121SN1 BLM18PG181SN1 BLM18PG221SN1 BLM18PG331SN1 BLM18PG471SN1 BLM18KG260TN1 BLM18KG300TN1 BLM18KG700TN1 BLM18KG101TN1 BLM18KG121TN1 BLM18KG221SN1 BLM18KG331SN1 BLM18KG471SN1 BLM18KG601SN1 BLM18SG260TN1 BLM18SG700TN1 BLM18SG121TN1 BLM18SG221TN1 BLM18SG331TN1 BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1 BLM18HE601SN1 BLM18HE102SN1 BLM18HE152SN1 BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1 BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1 BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1 BLM18HK102SN1 BLM18EG101TN1 BLM18EG121SN1 BLM18EG221SN1 BLM18EG221TN1 BLM18EG331TN1 BLM18EG391TN1 BLM18EG471SN1 BLM18EG601SN1 BLM18GG471SN1 BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1 BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1 BLM21AG102SN1 Rated Current 1000mA 3000mA 500mA 2000mA 1500mA 1400mA 1200mA 1000mA 6000mA 5000mA 3500mA 3000mA 3000mA 2200mA 1700mA 1500mA 1300mA 6000mA 4000mA 3000mA 2500mA 1500mA 200mA 200mA 100mA 800mA 600mA 500mA 100mA 100mA 50mA 200mA 100mA 50mA 200mA 200mA 100mA 50mA 2000mA 2000mA 2000mA 1000mA 500mA 500mA 500mA 500mA 200mA 800mA 800mA 800mA 700mA 700mA 600mA 500mA Chip Common Mode Choke Coil p50 Impedance at 100MHz/20C at 1GHz/20C 30ohm(Typ.) 33ohm25% 60ohm(Typ.) 120ohm25% 180ohm25% 220ohm25% 330ohm25% 470ohm25% 26ohm25% 30ohm25% 70ohm25% 100ohm25% 120ohm25% 220ohm25% 330ohm25% 470ohm25% 600ohm25% 26ohm25% 70ohm25% 120ohm25% 220ohm25% 330ohm25% 470ohm25% 600ohm(Typ.) 600ohm25% 700ohm(Typ.) 1000ohm25% 1000ohm(Typ.) 600ohm25% 600ohm(Typ.) 1000ohm25% 1000ohm(Typ.) 1500ohm25% 1500ohm(Typ.) 470ohm25% 1000ohm(Typ.) 600ohm25% 1200ohm(Typ.) 1000ohm25% 1700ohm(Typ.) 120ohm25% 500ohm40% 220ohm25% 1100ohm40% 330ohm25% 1600ohm40% 330ohm25% 400ohm40% 470ohm25% 600ohm40% 600ohm25% 700ohm40% 1000ohm25% 1200ohm40% 100ohm25% 140ohm(Typ.) 120ohm25% 145ohm(Typ.) 220ohm25% 260ohm(Typ.) 220ohm25% 300ohm(Typ.) 330ohm25% 450ohm(Typ.) 390ohm25% 520ohm(Typ.) 470ohm25% 550ohm(Typ.) 600ohm25% 700ohm(Typ.) 470ohm25% 1800ohm30% 120ohm25% 150ohm25% 220ohm25% 330ohm25% 470ohm25% 600ohm25% 1000ohm25% Block Type EMIFILr 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.5 0.8 0603 0.8 (1608) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.5 0.8 0.8 0.5 0.5 0.5 0.8 0.8 0.8 0.85 0.85 0.85 0805 0.85 (2012) 0.85 0.85 0.85 Part Number Type Microwave Absorber Size Code Thickness in inch (in mm) (mm) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 21 BLp Chip Ferrite Bead Series Line Up Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Chip Ferrite Bead Size Code Thickness in inch (in mm) (mm) 0805 (2012) 1206 (3216) 1806 (4516) 1210 (3225) Microwave Absorber 0804 (2010) 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 1.25 1.25 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 1.1 1.1 1.1 1.1 1.1 1.6 1.6 1.6 1.6 1.6 0.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Part Number Type p70 For High Speed Signal Lines (Sharp Impedance Curve) p73 For Digital Interface Lines p66 For Power Lines p75 For Power Lines p77 For Power Lines For Power Lines p79 p80 For General Signal Lines p80 For High Speed Signal Lines BLM21BD121SN1 BLM21BD151SN1 BLM21BD221SN1 BLM21BD331SN1 BLM21BD421SN1 BLM21BD471SN1 BLM21BD601SN1 BLM21BD751SN1 BLM21BD102SN1 BLM21BD152SN1 BLM21BD182SN1 BLM21BD222TN1 BLM21BD222SN1 BLM21BD272SN1 BLM21BB050SN1 BLM21BB600SN1 BLM21BB750SN1 BLM21BB121SN1 BLM21BB151SN1 BLM21BB201SN1 BLM21BB221SN1 BLM21BB331SN1 BLM21BB471SN1 BLM21RK121SN1 BLM21RK221SN1 BLM21RK471SN1 BLM21RK601SN1 BLM21RK102SN1 BLM21PG220SN1 BLM21PG300SN1 BLM21PG600SN1 BLM21PG121SN1 BLM21PG221SN1 BLM21PG331SN1 BLM31PG330SN1 BLM31PG500SN1 BLM31PG121SN1 BLM31PG391SN1 BLM31PG601SN1 BLM41PG600SN1 BLM41PG750SN1 BLM41PG181SN1 BLM41PG471SN1 BLM41PG102SN1 BLE32PN300SN1 BLA2AAG121SN4 BLA2AAG221SN4 BLA2AAG601SN4 BLA2AAG102SN4 BLA2ABD750SN4 BLA2ABD121SN4 BLA2ABD221SN4 BLA2ABD471SN4 BLA2ABD601SN4 BLA2ABD102SN4 BLA2ABB100SN4 BLA2ABB220SN4 BLA2ABB470SN4 BLA2ABB121SN4 BLA2ABB221SN4 Impedance at 100MHz/20C at 1GHz/20C 120ohm25% 150ohm25% 220ohm25% 330ohm25% 420ohm25% 470ohm25% 600ohm25% 750ohm25% 1000ohm25% 1500ohm25% 1800ohm25% 2200ohm25% 2250ohm(Typ.) 2700ohm25% 5ohm25% 60ohm25% 75ohm25% 120ohm25% 150ohm25% 200ohm25% 220ohm25% 330ohm25% 470ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% 22ohm25% 30ohm(Typ.) 60ohm25% 120ohm25% 220ohm25% 330ohm25% 33ohm25% 50ohm(Typ.) 120ohm25% 390ohm25% 600ohm25% 60ohm(Typ.) 75ohm(Typ.) 180ohm25% 470ohm25% 1000ohm25% 30ohm10ohm 120ohm25% 220ohm25% 600ohm25% 1000ohm25% 75ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% 10ohm25% 22ohm25% 47ohm25% 120ohm25% 220ohm25% Rated Current 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 1000mA 800mA 700mA 600mA 600mA 500mA 500mA 400mA 400mA 200mA 200mA 200mA 200mA 200mA 6000mA 4000mA 3500mA 3000mA 2000mA 1500mA 6000mA 3500mA 3500mA 2000mA 1500mA 6000mA 3500mA 3500mA 2000mA 1500mA 10000mA 100mA 50mA 50mA 50mA 200mA 200mA 100mA 100mA 100mA 50mA 200mA 200mA 200mA 50mA 50mA Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 22 BLp Chip Ferrite Bead Series Line Up p83 For General Signal Lines p83 For High Speed Signal Lines BLA31AG300SN4 BLA31AG600SN4 BLA31AG121SN4 BLA31AG221SN4 BLA31AG601SN4 BLA31AG102SN4 BLA31BD121SN4 BLA31BD221SN4 BLA31BD471SN4 BLA31BD601SN4 BLA31BD102SN4 Impedance at 100MHz/20C at 1GHz/20C 30ohm25% 60ohm25% 120ohm25% 220ohm25% 600ohm25% 1000ohm25% 120ohm25% 220ohm25% 470ohm25% 600ohm25% 1000ohm25% Rated Current 200mA 200mA 150mA 150mA 100mA 50mA 150mA 150mA 100mA 100mA 50mA Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 1206 (3216) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Part Number Type Chip Ferrite Bead Size Code Thickness in inch (in mm) (mm) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 23 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM02AX BLM02AX Series 01005/0402 (inch/mm) High Spec Ferrite Bead ultra low DC resistance. For general signal lines. Chip Ferrite Bead 01005/0402 (inch/mm) c Dimensions c Equivalent Circuit 0.20.02 0.20.02 0.40.02 (Resistance element becomes dominant at high frequencies.) 0.10+0.04/-0.03 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 20000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM02AX100SN1p 10ohm 5 ohm 750mA 0.07ohm max. -55C to +125C BLM02AX700SN1p 70ohm 25% 300mA 0.4ohm max. -55C to +125C BLM02AX121SN1p 120ohm 25% 250mA 0.5ohm max. -55C to +125C c Impedance-Frequency Characteristics 480 360 Impedance () Chip Common Mode Choke Coil Number of Circuits: 1 BLM02AX121SN1 240 BLM02AX700SN1 BLM02AX100SN1 120 0 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM02AX100SN1 BLM02AX700SN1 20 160 15 120 BLM02AX121SN1 240 R 0 1 10 100 Frequency (MHz) Z 80 R 1000 3000 0 160 Z 120 R 80 X 40 X Impedance () Z 10 5 Microwave Absorber Impedance () 200 Impedance () Block Type EMIFILr 1 X 1 10 100 Frequency (MHz) 40 1000 3000 0 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 24 10 100 Frequency (MHz) 1000 3000 Feature BLMppAX Series Advantage Chip Ferrite Bead Excellent for Both Signal and Power Lines. Multi Function Chip Ferrite Bead BLMppAX Series Feature Chip EMIFILr a1/2 the DC resistance than conventional type utilizing the latest technology New ferrite material Optimum ferrite firing condition Fine piling technology Advanced coil pattern design technology aImproved stability of performance at heat shock aWide line-up from 10 to 1000ohm(@100MHz) useful for signal line Advantage Chip Common Mode Choke Coil aHigh Rated Current Good for miniaturization of high power equipment aLower Voltage down at Ferrite bead Good for Battery driven equipment by saving running voltage margin aHigher Reliability Drastically Reduced DC Resistance DC Resistance Comparison 3.0 Block Type EMIFILr New type (BLM03AX) Conventional type (BLM03AG) 2.0 Drastically reduced Test Result - Heat Shock 1.5 30 0.5 0.0 0 200 400 600 800 Impedance @100MHz () 1000 1200 20 Conventional type (BLM15AG) 10 Microwave Absorber 1.0 Impedance Change (%) DC Resistance () 2.5 0 0 500 1000 New type (BLM15AX) -10 Heat Shock Cycle (cycles) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 25 BLM Series Signal Lines Type Chip Ferrite Bead BLM02BX BLM02BX Series 01005/0402 (inch/mm) High Spec Ferrite Bead ultra low DC resistance. For high speed signal lines. Chip Ferrite Bead 01005/0402 (inch/mm) c Dimensions c Equivalent Circuit 0.20.02 0.20.02 0.40.02 (Resistance element becomes dominant at high frequencies.) 0.10+0.04/-0.03 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 20000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM02BX151SN1p 150ohm 25% 200mA 0.7ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 300 Impedance () Chip Common Mode Choke Coil 400 BLM02BX151SN1 200 100 0 1 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr c Impedance-Frequency Characteristics BLM02BX151SN1 400 Impedance () 300 Z 200 R X 100 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 26 BLM Series Power Lines Type Chip Ferrite Bead BLM03PG BLM03PG Series 0201/0603 (inch/mm) 0201 size for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit 0.30.03 0.30.03 0.60.03 0201/0603 (inch/mm) Chip Ferrite Bead c Dimensions (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03PG220SN1p 22ohm 25% 900mA 0.065ohm max. -55C to +125C BLM03PG330SN1p 33ohm 25% 750mA 0.090ohm max. -55C to +125C Number of Circuits: 1 Chip Common Mode Choke Coil c Impedance-Frequency Characteristics 80 Impedance () 60 BLM03PG330SN1 40 BLM03PG220SN1 20 0 1 10 100 Frequency (MHz) 1000 3000 BLM03PG220SN1 BLM03PG330SN1 40 80 30 60 Impedance () Impedance () Block Type EMIFILr c Impedance-Frequency Characteristics Z R 20 X 10 Z 40 R 20 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 27 BLM Series Power Lines Type Chip Ferrite Bead BLM03PX BLM03PX Series 0201/0603 (inch/mm) Improved DC resistance meets larger current. c Dimensions c Equivalent Circuit 0.30.03 0.30.03 Chip Ferrite Bead 0201/0603 (inch/mm) 0.60.03 (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03PX220SN1p 22ohm 25% 1800mA 0.040ohm max. -55C to +125C BLM03PX330SN1p 33ohm 25% 1500mA 0.055ohm max. -55C to +125C BLM03PX800SN1p 80ohm 25% 1000mA 0.130ohm max. -55C to +125C c Impedance-Frequency Characteristics 160 c Notice (Rating) In operating temperature exceeding +85C derating of current is necessary for BLM03PX_SN1 series. Please apply the derating curve shown in chart according to the operating temperature. 120 Impedance () Chip Common Mode Choke Coil Number of Circuits: 1 BLM03PX800SN1 80 BLM03PX330SN1 Derating of Rated Current BLM03PX220SN1 2.00 40 1.80 0 Block Type EMIFILr 1 10 100 Frequency (MHz) 1000 BLM03PX220SN1 3000 BLM03PX330SN1 Rated Current (A) 1.50 1.45 1.20 1.00 BLM03PX800SN1 Microwave Absorber 0.80 0.60 0 85 125 145 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 28 BLM Series Power Lines Type Chip Ferrite Bead BLM03PX Series 0201/0603 (inch/mm) BLM03PX c Impedance-Frequency Characteristics BLM03PX330SN1 40 160 45 Z R 20 X 10 120 Impedance () Impedance () Impedance () 30 Z 30 R X 15 1 10 100 Frequency (MHz) 1000 3000 0 Z 80 R X 40 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 0 BLM03PX800SN1 60 0201/0603 (inch/mm) Chip Ferrite Bead BLM03PX220SN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 29 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM03AX BLM03AX Series 0201/0603 (inch/mm) High Spec Ferrite Bead Ultra low DC resistance and wide impedance line up. Fit for both power lines and signal lines. c Dimensions c Equivalent Circuit 0.30.03 0.30.03 Chip Ferrite Bead 0201/0603 (inch/mm) 0.60.03 (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03AX100SN1p 10ohm (Typ.) 1000mA 0.05ohm max. -55C to +125C BLM03AX800SN1p 80ohm 25% 500mA 0.18ohm max. -55C to +125C BLM03AX121SN1p 120ohm 25% 450mA 0.23ohm max. -55C to +125C BLM03AX241SN1p 240ohm 25% 350mA 0.38ohm max. -55C to +125C BLM03AX601SN1p 600ohm 25% 250mA 0.85ohm max. -55C to +125C BLM03AX102SN1p 1000ohm 25% 200mA 1.25ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1500 BLM03AX102SN1 1250 BLM03AX601SN1 BLM03AX241SN1 1000 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM03AX121SN1 750 BLM03AX800SN1 500 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM03AX100SN1 BLM03AX800SN1 16 Z Impedance () Impedance () 240 Z 12 Microwave Absorber BLM03AX121SN1 150 R 8 X 180 Impedance () Block Type EMIFILr BLM03AX100SN1 250 100 R X 50 4 0 Z 120 R X 60 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 30 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM03AX Series 0201/0603 (inch/mm) BLM03AX c Impedance-Frequency Characteristics BLM03AX601SN1 400 240 R 160 X Z 600 R X 300 80 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 1000 R 500 0 X 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 1 Impedance () 900 Z Impedance () Impedance () 1500 Z 320 0 BLM03AX102SN1 1200 0201/0603 (inch/mm) Chip Ferrite Bead BLM03AX241SN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 31 BLM Series Signal Lines Type Chip Ferrite Bead BLM03AG BLM03AG Series 0201/0603 (inch/mm) 0201 size for general signal lines. c Dimensions c Equivalent Circuit 0.30.03 0.30.03 Chip Ferrite Bead 0201/0603 (inch/mm) 0.60.03 (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03AG100SN1p 10ohm (Typ.) 500mA 0.1ohm max. -55C to +125C BLM03AG700SN1p 70ohm (Typ.) 200mA 0.4ohm max. -55C to +125C BLM03AG800SN1p 80ohm 25% 200mA 0.4ohm max. -55C to +125C BLM03AG121SN1p 120ohm 25% 200mA 0.5ohm max. -55C to +125C BLM03AG241SN1p 240ohm 25% 200mA 0.8ohm max. -55C to +125C BLM03AG601SN1p 600ohm 25% 100mA 1.5ohm max. -55C to +125C BLM03AG102SN1p 1000ohm 25% 100mA 2.5ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1500 BLM03AG102SN1 1250 BLM03AG601SN1 BLM03AG241SN1 1000 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM03AG121SN1 BLM03AG800SN1 750 BLM03AG700SN1 500 Block Type EMIFILr BLM03AG100SN1 250 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM03AG100SN1 BLM03AG700SN1 20 BLM03AG800SN1 160 120 100 Z 10 R 120 Z 80 Impedance () Impedance () Microwave Absorber Impedance () 15 R 60 40 X 5 Z 80 R 40 20 X X 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 32 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM03AG Series 0201/0603 (inch/mm) BLM03AG c Impedance-Frequency Characteristics Z Impedance () Impedance () 160 120 R 80 1000 400 800 300 Z R 200 X 40 0 X 100 1 10 100 Frequency (MHz) 1000 3000 1000 3000 BLM03AG601SN1 500 0 1 10 100 Frequency (MHz) 0201/0603 (inch/mm) Chip Ferrite Bead BLM03AG241SN1 200 Impedance () BLM03AG121SN1 Z 600 R 400 X 200 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 BLM03AG102SN1 1500 Impedance () Chip EMIFILr Z 1200 R 900 600 X 300 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 33 BLM Series Signal Lines Type Chip Ferrite Bead BLM03B BLM03B Series 0201/0603 (inch/mm) 0201 size for high speed signal lines. c Dimensions c Equivalent Circuit 0.30.03 0.30.03 Chip Ferrite Bead 0201/0603 (inch/mm) 0.60.03 (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03BD750SN1p 75ohm 25% 300mA 0.4ohm max. -55C to +125C BLM03BD121SN1p 120ohm 25% 250mA 0.5ohm max. -55C to +125C BLM03BD241SN1p 240ohm 25% 200mA 0.8ohm max. -55C to +125C BLM03BD471SN1p 470ohm 25% 215mA 1.5ohm max. -55C to +125C BLM03BD601SN1p 600ohm 25% 200mA 1.7ohm max. -55C to +125C BLM03BB100SN1p 10ohm 25% 300mA 0.4ohm max. -55C to +125C BLM03BB220SN1p 22ohm 25% 200mA 0.5ohm max. -55C to +125C BLM03BB470SN1p 47ohm 25% 200mA 0.7ohm max. -55C to +125C BLM03BB750SN1p 75ohm 25% 200mA 1.0ohm max. -55C to +125C BLM03BB121SN1p 120ohm 25% 100mA 1.5ohm max. -55C to +125C BLM03BC330SN1p 33ohm 25% 150mA 0.85ohm max. -55C to +125C BLM03BC560SN1p 56ohm 25% 100mA 1.05ohm max. -55C to +125C BLM03BC800SN1p 80ohm 25% 100mA 1.40ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics BLM03BB Series 1200 800 1000 600 BLM03BD601SN1 Impedance () 800 Impedance () Block Type EMIFILr BLM03BD Series BLM03BD471SN1 600 BLM03BD241SN1 BLM03BD121SN1 400 BLM03BB121SN1 BLM03BB750SN1 400 BLM03BB470SN1 BLM03BB220SN1 200 BLM03BD750SN1 BLM03BB100SN1 200 0 0 Microwave Absorber 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 34 BLM Series Signal Lines Type Chip Ferrite Bead BLM03B Series 0201/0603 (inch/mm) BLM03B c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM03BC Series 1500 BLM03BD750SN1 BLM03BC800SN1 0201/0603 (inch/mm) Chip Ferrite Bead 900 200 BLM03BC560SN1 600 150 Impedance () BLM03BC330SN1 100 R 50 0 100 Frequency (MHz) 1000 0 BLM03BD241SN1 500 240 400 180 Z 120 R X 60 1 10 1000 BLM03BD601SN1 X 200 1 10 100 Frequency (MHz) 1000 100 Frequency (MHz) 1000 R 20 X 1 10 100 Frequency (MHz) Impedance () X 1 10 100 Frequency (MHz) 1000 1000 BLM03BC330SN1 Impedance () Z R 300 200 X R X 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 10 100 Frequency (MHz) 1000 3000 1000 3000 R 400 X 0 3000 1 10 100 Frequency (MHz) BLM03BC800SN1 1500 1200 Z 600 R 400 0 1 200 X Z 900 R 600 X 300 200 100 X 600 800 400 R Z Z 1000 500 Z BLM03BB121SN1 BLM03BC560SN1 600 100 Frequency (MHz) 100 0 3000 300 0 3000 10 50 150 100 1 800 450 R 200 X 150 Z Impedance () Z 3000 R 200 600 300 1000 Z 400 0 3000 BLM03BB750SN1 400 3000 BLM03BB220SN1 40 0 3000 BLM03BB470SN1 Impedance () 10 Impedance () Impedance () Impedance () R 400 0 1 60 Z 600 1000 200 80 800 0 X BLM03BB100SN1 1000 0 R 200 0 3000 100 Frequency (MHz) 600 Z 300 100 100 Frequency (MHz) 10 800 Impedance () 0 1 BLM03BD471SN1 Impedance () 300 Impedance () Impedance () BLM03BD121SN1 X 3000 Chip EMIFILr 10 Chip Common Mode Choke Coil 1 Impedance () Z Block Type EMIFILr 300 Microwave Absorber Impedance () 1200 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 35 BLM Series Power Lines Type Chip Ferrite Bead BLM15PX BLM15PX Series 0402/1005 (inch/mm) 3A max., high performance type for power lines up to 600ohm. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15PX330SN1p 33ohm 25% 3000mA 0.022ohm max. -55C to +125C BLM15PX600SN1p 60ohm 25% 2500mA 0.032ohm max. -55C to +125C BLM15PX800SN1p 80ohm 25% 2300mA 0.038ohm max. -55C to +125C BLM15PX121SN1p 120ohm 25% 2000mA 0.055ohm max. -55C to +125C BLM15PX181SN1p 180ohm 25% 1500mA 0.090ohm max. -55C to +125C BLM15PX221SN1p 220ohm 25% 1400mA 0.10ohm max. -55C to +125C BLM15PX331SN1p 330ohm 25% 1200mA 0.15ohm max. -55C to +125C BLM15PX471SN1p 470ohm 25% 1000mA 0.20ohm max. -55C to +125C BLM15PX601SN1p 600ohm 25% 900mA 0.23ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 800 In operating temperature exceeding +85C, derating of current is necessary for BLM15PX series. Please apply the derating curve shown in chart according to the operating temperature. BLM15PX601SN1 BLM15PX471SN1 600 Impedance () Block Type EMIFILr BLM15PX331SN1 BLM15PX221SN1 BLM15PX181SN1 400 c Notice (Rating) BLM15PX121SN1 BLM15PX800SN1 BLM15PX600SN1 Derating of Rated Current BLM15PX330SN1 200 0 1 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) 3000 2500 2300 2000 1700 1500 1400 1400 1300 1200 1100 1000 900 Microwave Absorber 0 800 700 600 500 0 125 85 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 36 BLM Series Power Lines Type Chip Ferrite Bead BLM15PX Series 0402/1005 (inch/mm) BLM15PX c Impedance-Frequency Characteristics R X 1 10 100 Frequency (MHz) 1000 0 3000 Z 90 R 60 1 10 100 Frequency (MHz) 1000 0 3000 R 80 X 180 R 120 60 10 100 Frequency (MHz) 1000 0 3000 BLM15PX331SN1 3000 1000 3000 1000 3000 R 140 X 70 1 10 100 Frequency (MHz) 1000 0 3000 BLM15PX471SN1 500 1000 Z 210 X 40 1 100 Frequency (MHz) 280 Z Impedance () Impedance () 120 10 350 240 Z 1 BLM15PX221SN1 300 160 X 30 BLM15PX181SN1 200 1 10 100 Frequency (MHz) BLM15PX601SN1 800 600 500 400 Z Impedance () 600 R 300 200 X Impedance () Impedance () 40 20 BLM15PX121SN1 Impedance () R X 15 Z 400 R 300 200 X 100 Z 400 R 200 100 1 10 100 Frequency (MHz) 1000 3000 0 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 0 60 Chip EMIFILr 30 120 Z Impedance () Impedance () Impedance () Z 0 150 80 45 0 BLM15PX800SN1 100 0402/1005 (inch/mm) Chip Ferrite Bead BLM15PX600SN1 60 Chip Common Mode Choke Coil BLM15PX330SN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 37 BLM Series Power Lines Type Chip Ferrite Bead BLM15PG/BLM15PD BLM15PG/BLM15PD Series 0402/1005 (inch/mm) 0402 size for power lines. *Please refer to the products which are designed for both power lines and signal lines. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15PG100SN1p 10ohm (Typ.) 1000mA 0.025ohm max. -55C to +125C BLM15PD300SN1p 30ohm 25% 2200mA 0.035ohm max. -55C to +125C BLM15PD600SN1p 60ohm 25% 1700mA 0.06ohm max. -55C to +125C BLM15PD800SN1p 80ohm 25% 1500mA 0.07ohm max. -55C to +125C BLM15PD121SN1p 120ohm 25% 1300mA 0.09ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 200 BLM15PD800SN1 160 BLM15PD600SN1 BLM15PD300SN1 120 c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BLM15PD series. Please apply the derating curve shown in chart according to the operating temperature. BLM15PD121SN1 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM15PG100SN1 80 Derating of Rated Current 0 1 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) Block Type EMIFILr 40 2200 2000 1700 1500 1300 1000 0 1400 1100 900 0 85 125 Operating Temperature (C) Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 38 BLM Series Power Lines Type Chip Ferrite Bead BLM15PG/BLM15PD Series 0402/1005 (inch/mm) BLM15PG/BLM15PD c Impedance-Frequency Characteristics BLM15PD300SN1 18 R 6 Z Impedance () Impedance () 30 R 20 X Z 60 R 40 X X 20 10 1 10 100 Frequency (MHz) 1000 0 3000 BLM15PD800SN1 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 BLM15PD121SN1 150 200 120 160 Impedance () Z 90 R 60 X 30 Chip EMIFILr Impedance () 9 3 Impedance () 80 40 Z 12 Z 120 R 80 X 40 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 100 50 15 0 BLM15PD600SN1 0402/1005 (inch/mm) Chip Ferrite Bead BLM15PG100SN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 39 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM15AX BLM15AX Series 0402/1005 (inch/mm) High Spec Ferrite Bead Ultra low DC resistance and wide impedance line up. Fit for both power lines and signal lines. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15AX100SN1p 10ohm 5ohm 1740mA 0.015ohm max. -55C to +125C BLM15AX300SN1p 30ohm 25% 1100mA 0.06ohm max. -55C to +125C BLM15AX700SN1p 70ohm 25% 780mA 0.1ohm max. -55C to +125C BLM15AX121SN1p 120ohm 25% 700mA 0.13ohm max. -55C to +125C BLM15AX221SN1p 220ohm 25% 600mA 0.18ohm max. -55C to +125C BLM15AX601SN1p 600ohm 25% 500mA 0.34ohm max. -55C to +125C BLM15AX102SN1p 1000ohm 25% 350mA 0.49ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1500 BLM15AX102SN1 1200 BLM15AX601SN1 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) 900 BLM15AX221SN1 BLM15AX121SN1 600 BLM15AX700SN1 Block Type EMIFILr BLM15AX300SN1 300 BLM15AX100SN1 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 40 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM15AX Series 0402/1005 (inch/mm) BLM15AX c Impedance-Frequency Characteristics BLM15AX300SN1 16 120 100 Z 45 R 8 X 4 Z Impedance () Impedance () 12 Impedance () BLM15AX700SN1 60 0402/1005 (inch/mm) Chip Ferrite Bead BLM15AX100SN1 Z 30 R 80 R 60 40 X X 15 20 10 100 Frequency (MHz) 1000 0 3000 BLM15AX121SN1 100 Frequency (MHz) 1000 0 3000 Impedance () 120 R 80 X 1 10 100 Frequency (MHz) 1000 3000 200 1000 3000 0 100 Frequency (MHz) 1000 3000 1000 3000 800 Z R X 100 40 10 1000 300 Z 1 BLM15AX601SN1 400 160 Impedance () 10 BLM15AX221SN1 200 0 1 Z 600 R 400 X 200 1 10 100 Frequency (MHz) 1000 3000 Chip EMIFILr 1 Impedance () 0 0 1 10 100 Frequency (MHz) Chip Common Mode Choke Coil BLM15AX102SN1 1500 Impedance () 1200 Z R 900 600 X 300 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 41 BLM Series Signal Lines Type Chip Ferrite Bead BLM15AG BLM15AG Series 0402/1005 (inch/mm) 0402 size for general signal lines. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15AG100SN1p 10ohm (Typ.) 1000mA 0.025ohm max. -55C to +125C BLM15AG700SN1p 70ohm (Typ.) 600mA 0.15ohm max. -55C to +125C BLM15AG121SN1p 120ohm 25% 550mA 0.19ohm max. -55C to +125C BLM15AG221SN1p 220ohm 25% 450mA 0.29ohm max. -55C to +125C BLM15AG601SN1p 600ohm 25% 300mA 0.52ohm max. -55C to +125C BLM15AG102SN1p 1000ohm 25% 300mA 0.65ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1200 900 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM15AG102SN1 BLM15AG601SN1 BLM15AG221SN1 BLM15AG121SN1 BLM15AG700SN1 BLM15AG100SN1 600 Block Type EMIFILr 300 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM15AG100SN1 BLM15AG700SN1 18 BLM15AG121SN1 120 200 90 12 9 R 6 X 150 Z Impedance () Z Impedance () Microwave Absorber Impedance () 15 R 60 X 30 Z R 100 50 X 3 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 42 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM15AG Series 0402/1005 (inch/mm) BLM15AG c Impedance-Frequency Characteristics BLM15AG601SN1 1200 600 Z R 200 100 900 Impedance () Impedance () 300 Impedance () BLM15AG102SN1 800 400 0402/1005 (inch/mm) Chip Ferrite Bead BLM15AG221SN1 Z 400 R Z R 600 300 200 X X X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 43 BLM Series Signal Lines Type Chip Ferrite Bead BLM15BX BLM15BX Series 0402/1005 (inch/mm) 0402 size for high speed signal lines, low DC resistance. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15BX750SN1p 75ohm 25% 600mA 0.15ohm max. -55C to +125C BLM15BX121SN1p 120ohm 25% 600mA 0.17ohm max. -55C to +125C BLM15BX221SN1p 220ohm 25% 450mA 0.27ohm max. -55C to +125C BLM15BX471SN1p 470ohm 25% 350mA 0.41ohm max. -55C to +125C BLM15BX601SN1p 600ohm 25% 350mA 0.46ohm max. -55C to +125C BLM15BX102SN1p 1000ohm 25% 300mA 0.65ohm max. -55C to +125C BLM15BX182SN1p 1800ohm 25% 250mA 0.90ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 2500 2000 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM15BX182SN1 1500 BLM15BX102SN1 BLM15BX601SN1 BLM15BX471SN1 1000 BLM15BX221SN1 BLM15BX121SN1 Block Type EMIFILr BLM15BX750SN1 500 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 44 BLM Series Signal Lines Type Chip Ferrite Bead BLM15BX Series 0402/1005 (inch/mm) BLM15BX c Impedance-Frequency Characteristics Impedance () Impedance () 120 Z 80 R X 40 0 BLM15BX221SN1 250 450 200 360 Z 150 R 100 X 50 1 10 100 Frequency (MHz) 1000 0 3000 BLM15BX471SN1 Z 270 R 180 X 90 1 10 100 Frequency (MHz) 1000 0 3000 BLM15BX601SN1 1 10 100 Frequency (MHz) 1000 3000 1000 3000 BLM15BX102SN1 1200 900 0402/1005 (inch/mm) Chip Ferrite Bead BLM15BX121SN1 160 Impedance () BLM15BX750SN1 1600 450 300 X Z 600 R 300 Z R 800 X 400 X 150 0 Chip EMIFILr R 1200 Impedance () 900 Z 600 Impedance () Impedance () 750 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Chip Common Mode Choke Coil BLM15BX182SN1 2500 Impedance () 2000 Z 1500 R 1000 X 500 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 45 BLM Series Signal Lines Type Chip Ferrite Bead BLM15B BLM15B Series 0402/1005 (inch/mm) 0402 size for high speed signal lines. Chip Ferrite Bead 0402/1005 (inch/mm) c Dimensions c Equivalent Circuit 0.50.05 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15BD750SN1p 75ohm 25% 300mA 0.20ohm max. -55C to +125C BLM15BD121SN1p 120ohm 25% 300mA 0.30ohm max. -55C to +125C BLM15BD221SN1p 220ohm 25% 300mA 0.40ohm max. -55C to +125C BLM15BD471SN1p 470ohm 25% 200mA 0.60ohm max. -55C to +125C BLM15BD601SN1p 600ohm 25% 200mA 0.65ohm max. -55C to +125C BLM15BD102SN1p 1000ohm 25% 200mA 0.90ohm max. -55C to +125C BLM15BD182SN1p 1800ohm 25% 100mA 1.40ohm max. -55C to +125C BLM15BB050SN1p 5ohm 25% 500mA 0.08ohm max. -55C to +125C BLM15BB100SN1p 10ohm 25% 300mA 0.10ohm max. -55C to +125C BLM15BB220SN1p 22ohm 25% 300mA 0.20ohm max. -55C to +125C BLM15BB470SN1p 47ohm 25% 300mA 0.35ohm max. -55C to +125C BLM15BB750SN1p 75ohm 25% 300mA 0.40ohm max. -55C to +125C BLM15BB121SN1p 120ohm 25% 300mA 0.55ohm max. -55C to +125C BLM15BB221SN1p 220ohm 25% 200mA 0.80ohm max. -55C to +125C BLM15BC121SN1p 120ohm 25% 350mA 0.45ohm max. -55C to +125C BLM15BC241SN1p 240ohm 25% 250mA 0.70ohm max. -55C to +125C BLM15BA050SN1p 5ohm 25% 300mA 0.10ohm max. -55C to +125C BLM15BA100SN1p 10ohm 25% 300mA 0.20ohm max. -55C to +125C BLM15BA220SN1p 22ohm 25% 300mA 0.30ohm max. -55C to +125C BLM15BA330SN1p 33ohm 25% 300mA 0.40ohm max. -55C to +125C BLM15BA470SN1p 47ohm 25% 200mA 0.60ohm max. -55C to +125C BLM15BA750SN1p 75ohm 25% 200mA 0.80ohm max. -55C to +125C Number of Circuits: 1 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 46 BLM Series Signal Lines Type Chip Ferrite Bead BLM15B Series 0402/1005 (inch/mm) BLM15B c Impedance-Frequency Characteristics BLM15BD Series BLM15BB Series BLM15BD182SN1 BLM15BD102SN1 BLM15BD601SN1 BLM15BD471SN1 BLM15BD221SN1 BLM15BD121SN1 BLM15BD750SN1 1000 BLM15BB221SN1 BLM15BB121SN1 BLM15BB750SN1 BLM15BB470SN1 BLM15BB220SN1 BLM15BB100SN1 BLM15BB050SN1 600 Impedance () Impedance () 1500 0402/1005 (inch/mm) Chip Ferrite Bead 900 2000 300 500 0 0 10 100 Frequency (MHz) 1000 3000 1 BLM15BC Series 10 100 Frequency (MHz) 1000 3000 1000 3000 BLM15BA Series Chip EMIFILr 1 5000 4000 4000 BLM15BA750SN1 3000 Impedance () Impedance () BLM15BA470SN1 BLM15BC241SN1 2000 BLM15BC121SN1 BLM15BA330SN1 3000 BLM15BA220SN1 BLM15BA100SN1 2000 BLM15BA050SN1 1000 0 Chip Common Mode Choke Coil 1000 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM15BD750SN1 BLM15BD121SN1 150 BLM15BD221SN1 250 400 Z X 50 Z 150 R 100 X 1 10 100 Frequency (MHz) 1000 0 3000 BLM15BD471SN1 100 Frequency (MHz) 1000 0 3000 600 R 400 X 200 1 10 100 Frequency (MHz) 10 3000 600 R 400 0 1000 3000 1000 3000 Z Z X 1000 R 500 X 200 1000 100 Frequency (MHz) BLM15BD102SN1 Impedance () Z 1 1500 800 Impedance () Impedance () 10 1000 800 0 1 BLM15BD601SN1 1000 X 100 50 0 R 200 Block Type EMIFILr R Microwave Absorber Z 300 Impedance () 100 Impedance () Impedance () 200 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 47 BLM Series Signal Lines Type Chip Ferrite Bead BLM15B Series 0402/1005 (inch/mm) BLM15B c Impedance-Frequency Characteristics Chip Ferrite Bead 0402/1005 (inch/mm) BLM15BD182SN1 BLM15BB050SN1 2000 BLM15BB100SN1 25 60 Z 1000 1 10 100 Frequency (MHz) 1000 0 3000 BLM15BB220SN1 10 100 Frequency (MHz) 1000 100 1000 0 3000 BLM15BB121SN1 Chip Common Mode Choke Coil 1000 3000 10 100 Frequency (MHz) 1000 R 0 3000 BLM15BB221SN1 500 200 X X 1 Z 100 R 50 20 100 Frequency (MHz) 100 Frequency (MHz) 300 150 X 10 10 400 Impedance () 40 1 1 BLM15BB750SN1 200 R 60 0 0 3000 Z Impedance () Impedance () 1 Z 80 X 15 250 100 R 30 X BLM15BB470SN1 120 Chip EMIFILr R 10 5 X 0 15 R 500 Z 45 Impedance () Impedance () Impedance () 20 Z 1500 1 10 100 Frequency (MHz) 1000 3000 1000 3000 BLM15BC121SN1 1000 900 Z 300 Z 200 R Impedance () 800 Impedance () Impedance () 400 600 300 Z X 1 10 100 Frequency (MHz) X 1000 0 3000 BLM15BC241SN1 10 100 Frequency (MHz) 1000 0 3000 Z 1000 500 80 R 60 X 40 20 X 100 Frequency (MHz) 200 Z Impedance () Impedance () 1500 10 240 100 2000 1 BLM15BA100SN1 120 2500 Impedance () 1 R BLM15BA050SN1 3000 Block Type EMIFILr X 400 200 100 0 R 600 Z 160 R 120 X 80 40 R 1 10 100 Frequency (MHz) 1000 0 3000 BLM15BA220SN1 400 300 Z Impedance () Microwave Absorber Impedance () 500 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 BLM15BA470SN1 1000 2000 800 1600 600 400 Z 1200 800 R 200 100 0 10 BLM15BA330SN1 600 200 1 Impedance () 0 1 10 100 Frequency (MHz) X 1000 400 R Z X 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 R 1 10 100 Frequency (MHz) X 1000 3000 Continued on the following page. !Note 48 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM15B Series 0402/1005 (inch/mm) BLM15B c Impedance-Frequency Characteristics 0402/1005 (inch/mm) Chip Ferrite Bead BLM15BA750SN1 5000 Impedance () 4000 3000 2000 R X 1000 Z 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 49 BLM Series Power Lines Type Chip Ferrite Bead BLM18P BLM18P Series 0603/1608 (inch/mm) 0603 size for power lines. *Please refer to the products designed for both power lines and signal lines. c Dimensions c Equivalent Circuit 0.80.15 Chip Ferrite Bead 0603/1608 (inch/mm) 0.40.2 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.80.15 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18PG300SN1p 30ohm (Typ.) 1000mA 0.05ohm max. -55C to +125C BLM18PG330SN1p 33ohm 25% 3000mA 0.025ohm max. -55C to +125C BLM18PG600SN1p 60ohm (Typ.) 500mA 0.10ohm max. -55C to +125C BLM18PG121SN1p 120ohm 25% 2000mA 0.05ohm max. -55C to +125C BLM18PG181SN1p 180ohm 25% 1500mA 0.09ohm max. -55C to +125C BLM18PG221SN1p 220ohm 25% 1400mA 0.10ohm max. -55C to +125C BLM18PG331SN1p 330ohm 25% 1200mA 0.15ohm max. -55C to +125C BLM18PG471SN1p 470ohm 25% 1000mA 0.20ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 600 BLM18PG471SN1 BLM18PG331SN1 BLM18PG221SN1 BLM18PG181SN1 BLM18PG121SN1 BLM18PG600SN1 BLM18PG330SN1 BLM18PG300SN1 300 c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BLM18PG series. Please apply the derating curve shown in chart according to the operating temperature. 450 Impedance () Derating of Rated Current 150 0 1 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) 3000 2000 1500 1400 1200 1000 500 0 0 85 125 Microwave Absorber Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 50 BLM Series Power Lines Type Chip Ferrite Bead BLM18P Series 0603/1608 (inch/mm) BLM18P c Impedance-Frequency Characteristics X 75 Impedance () R 20 10 Z 30 R 20 X 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 0 3000 R 100 10 100 Frequency (MHz) 1000 3000 1000 3000 300 Z 200 Impedance () Impedance () Z 1 BLM18PG221SN1 300 150 R X BLM18PG181SN1 200 Z 50 25 10 BLM18PG121SN1 Impedance () 100 40 Z Impedance () Impedance () 30 0 BLM18PG600SN1 50 0603/1608 (inch/mm) Chip Ferrite Bead BLM18PG330SN1 40 R 100 Chip EMIFILr BLM18PG300SN1 200 Z R 100 50 10 100 Frequency (MHz) 1000 0 3000 BLM18PG331SN1 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 10 100 Frequency (MHz) BLM18PG471SN1 Chip Common Mode Choke Coil 1 X X X 0 600 450 Impedance () Impedance () 450 300 Z R 150 Z R 300 X 150 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 51 BLM Series Power Lines Type Chip Ferrite Bead BLM18K BLM18K Series 0603/1608 (inch/mm) 6A max., high performance type for power lines up to 600ohm. *Please refer to the products designed for both power lines and signal lines. Chip Ferrite Bead 0603/1608 (inch/mm) c Dimensions c Equivalent Circuit 0.80.15 T 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.40.2 Part Number c Packaging T BLM18KG_TN 0.60.15 BLM18KG_SN 0.80.15 : Electrode (in mm) Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18KG260TN1p 26ohm 25% 6000mA 0.007ohm max. -55C to +125C BLM18KG300TN1p 30ohm 25% 5000mA 0.010ohm max. -55C to +125C BLM18KG700TN1p 70ohm 25% 3500mA 0.022ohm max. -55C to +125C BLM18KG101TN1p 100ohm 25% 3000mA 0.030ohm max. -55C to +125C BLM18KG121TN1p 120ohm 25% 3000mA 0.030ohm max. -55C to +125C BLM18KG221SN1p 220ohm 25% 2200mA 0.050ohm max. -55C to +125C BLM18KG331SN1p 330ohm 25% 1700mA 0.080ohm max. -55C to +125C BLM18KG471SN1p 470ohm 25% 1500mA 0.130ohm max. -55C to +125C BLM18KG601SN1p 600ohm 25% 1300mA 0.150ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 800 400 c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BLM18KG series. Please apply the derating curve shown in chart according to the operating temperature. BLM18KG601SN1 BLM18KG471SN1 BLM18KG331SN1 BLM18KG221SN1 BLM18KG121TN1 BLM18KG101TN1 BLM18KG700TN1 BLM18KG300TN1 BLM18KG260TN1 600 Impedance () Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Derating of Rated Current 200 0 1 10 100 Frequency (MHz) 1000 6000 3000 Microwave Absorber Rated Current (mA) 5000 3500 3000 2200 2000 1700 1500 1300 1000 0 0 85 125 Operating Temperature (C) Continued on the following page. !Note 52 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Power Lines Type Chip Ferrite Bead BLM18K Series 0603/1608 (inch/mm) BLM18K c Impedance-Frequency Characteristics BLM18KG300TN1 40 BLM18KG700TN1 40 0603/1608 (inch/mm) Chip Ferrite Bead BLM18KG260TN1 100 Z X 1 10 100 Frequency (MHz) X 1000 0 3000 1 10 100 Frequency (MHz) 1000 Impedance () 100 R 50 1 10 100 Frequency (MHz) 1000 3000 1000 3000 1000 3000 400 150 Z X BLM18KG221SN1 200 150 R 50 0 3000 BLM18KG121TN1 200 Z 25 10 BLM18KG101TN1 Impedance () 20 300 Z Impedance () 0 R R 100 X 50 Chip EMIFILr 20 Impedance () R 10 75 30 Z Impedance () Impedance () 30 Z R 200 100 X X 10 100 Frequency (MHz) 1000 0 3000 BLM18KG331SN1 10 1000 0 3000 Impedance () R 300 R 400 10 100 Frequency (MHz) R X 1000 3000 1 10 100 Frequency (MHz) X 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 1 Z 400 200 X 0 100 Frequency (MHz) 600 Z 200 150 10 800 600 Z 1 BLM18KG601SN1 800 450 0 100 Frequency (MHz) BLM18KG471SN1 600 Impedance () 1 Chip Common Mode Choke Coil 1 Impedance () 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 53 BLM Series Power Lines Type Chip Ferrite Bead BLM18S BLM18S Series 0603/1608 (inch/mm) 6A max., high performance type for power lines. *Please refer to the products designed for both power lines and signal lines. Chip Ferrite Bead 0603/1608 (inch/mm) c Dimensions c Equivalent Circuit 0.80.15 0.50.15 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.40.2 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 30000 B Bulk(Bag) 1000 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18SG260TN1p 26ohm 25% 6000mA 0.007ohm max. -55C to +125C BLM18SG700TN1p 70ohm 25% 4000mA 0.020ohm max. -55C to +125C BLM18SG121TN1p 120ohm 25% 3000mA 0.025ohm max. -55C to +125C BLM18SG221TN1p 220ohm 25% 2500mA 0.040ohm max. -55C to +125C BLM18SG331TN1p 330ohm 25% 1500mA 0.070ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 400 c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BLM18SG series. Please apply the derating curve shown in chart according to the operating temperature. BLM18SG331TN1 BLM18SG221TN1 300 BLM18SG121TN1 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM18SG700TN1 200 BLM18SG260TN1 Derating of Rated Current Block Type EMIFILr 100 6000 0 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) 1 4000 3000 2500 Microwave Absorber 1500 1000 0 0 85 125 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 54 BLM Series Power Lines Type Chip Ferrite Bead BLM18S Series 0603/1608 (inch/mm) BLM18S c Impedance-Frequency Characteristics BLM18SG700TN1 40 Z 20 X 1 10 100 Frequency (MHz) 1000 60 0 3000 X 1 10 100 Frequency (MHz) Z 120 R 80 X 40 1000 3000 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 BLM18SG331TN1 400 500 Impedance () Z 200 R 100 100 Frequency (MHz) R 200 1000 3000 0 X 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 10 Z 100 X 1 300 Chip EMIFILr 400 300 Impedance () R 30 BLM18SG221TN1 0 160 Z Impedance () R 10 200 90 Impedance () Impedance () 30 0 BLM18SG121TN1 120 0603/1608 (inch/mm) Chip Ferrite Bead BLM18SG260TN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 55 BLM Series Signal Lines Type Chip Ferrite Bead BLM18A BLM18A Series 0603/1608 (inch/mm) 0603 size for general signal lines. *Please refer to BLM15A for downsizing. Chip Ferrite Bead 0603/1608 (inch/mm) c Dimensions c Equivalent Circuit 0.80.15 0.40.2 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.80.15 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Block Type EMIFILr Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18AG121SN1p 120ohm 25% 500mA 0.18ohm max. -55C to +125C BLM18AG151SN1p 150ohm 25% 500mA 0.25ohm max. -55C to +125C BLM18AG221SN1p 220ohm 25% 500mA 0.25ohm max. -55C to +125C BLM18AG331SN1p 330ohm 25% 500mA 0.30ohm max. -55C to +125C BLM18AG471SN1p 470ohm 25% 500mA 0.35ohm max. -55C to +125C BLM18AG601SN1p 600ohm 25% 500mA 0.38ohm max. -55C to +125C BLM18AG102SN1p 1000ohm 25% 400mA 0.50ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1200 900 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM18AG102SN1 BLM18AG601SN1 BLM18AG471SN1 BLM18AG331SN1 BLM18AG221SN1 BLM18AG151SN1 BLM18AG121SN1 600 300 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18AG121SN1 BLM18AG151SN1 200 BLM18AG221SN1 200 300 Z Z Z R 100 X 50 0 1 10 100 Frequency (MHz) Impedance () 150 Impedance () Microwave Absorber Impedance () 150 R 100 X R 200 X 100 50 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 56 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM18A Series 0603/1608 (inch/mm) BLM18A c Impedance-Frequency Characteristics Impedance () Impedance () 400 Z 300 R 200 X 0 1 10 100 Frequency (MHz) 800 450 600 Z 300 R X 150 100 1000 3000 1000 3000 BLM18AG601SN1 600 0 1 10 100 Frequency (MHz) Z R 400 X 200 1000 3000 0603/1608 (inch/mm) Chip Ferrite Bead BLM18AG471SN1 500 Impedance () BLM18AG331SN1 0 1 10 100 Frequency (MHz) 1000 3000 BLM18AG102SN1 1200 Chip EMIFILr Impedance () 900 Z R 600 300 X 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 57 BLM Series Signal Lines Type Chip Ferrite Bead BLM18B BLM18B Series 0603/1608 (inch/mm) 0603 size for high speed signal lines. *Please refer to BLM15B for downsizing. Chip Ferrite Bead 0603/1608 (inch/mm) c Dimensions c Equivalent Circuit 0.80.15 0.40.2 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.80.15 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18BD470SN1p 47ohm 25% 500mA 0.30ohm max. -55C to +125C BLM18BD121SN1p 120ohm 25% 200mA 0.40ohm max. -55C to +125C BLM18BD151SN1p 150ohm 25% 200mA 0.40ohm max. -55C to +125C BLM18BD221SN1p 220ohm 25% 200mA 0.45ohm max. -55C to +125C BLM18BD331SN1p 330ohm 25% 200mA 0.50ohm max. -55C to +125C BLM18BD421SN1p 420ohm 25% 200mA 0.55ohm max. -55C to +125C BLM18BD471SN1p 470ohm 25% 200mA 0.55ohm max. -55C to +125C BLM18BD601SN1p 600ohm 25% 200mA 0.65ohm max. -55C to +125C BLM18BD102SN1p 1000ohm 25% 100mA 0.85ohm max. -55C to +125C BLM18BD152SN1p 1500ohm 25% 50mA 1.20ohm max. -55C to +125C BLM18BD182SN1p 1800ohm 25% 50mA 1.50ohm max. -55C to +125C BLM18BD222SN1p 2200ohm 25% 50mA 1.50ohm max. -55C to +125C BLM18BD252SN1p 2500ohm 25% 50mA 1.50ohm max. -55C to +125C BLM18BB050SN1p 5ohm 25% 700mA 0.05ohm max. -55C to +125C BLM18BB100SN1p 10ohm 25% 700mA 0.10ohm max. -55C to +125C BLM18BB220SN1p 22ohm 25% 600mA 0.20ohm max. -55C to +125C BLM18BB470SN1p 47ohm 25% 550mA 0.25ohm max. -55C to +125C BLM18BB600SN1p 60ohm 25% 550mA 0.25ohm max. -55C to +125C BLM18BB750SN1p 75ohm 25% 500mA 0.30ohm max. -55C to +125C BLM18BB121SN1p 120ohm 25% 500mA 0.30ohm max. -55C to +125C BLM18BB141SN1p 140ohm 25% 450mA 0.35ohm max. -55C to +125C BLM18BB151SN1p 150ohm 25% 450mA 0.37ohm max. -55C to +125C BLM18BB221SN1p 220ohm 25% 450mA 0.45ohm max. -55C to +125C BLM18BB331SN1p 330ohm 25% 400mA 0.58ohm max. -55C to +125C BLM18BB471SN1p 470ohm 25% 300mA 0.85ohm max. -55C to +125C BLM18BA050SN1p 5ohm 25% 500mA 0.20ohm max. -55C to +125C BLM18BA100SN1p 10ohm 25% 500mA 0.25ohm max. -55C to +125C BLM18BA220SN1p 22ohm 25% 500mA 0.35ohm max. -55C to +125C BLM18BA470SN1p 47ohm 25% 300mA 0.55ohm max. -55C to +125C BLM18BA750SN1p 75ohm 25% 300mA 0.70ohm max. -55C to +125C BLM18BA121SN1p 120ohm 25% 200mA 0.90ohm max. -55C to +125C Number of Circuits: 1 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 58 BLM Series Signal Lines Type Chip Ferrite Bead BLM18B Series 0603/1608 (inch/mm) BLM18B c Impedance-Frequency Characteristics BLM18BD Series (470ohm to 2500ohm) BLM18BD Series (47ohm to 420ohm) 1000 0603/1608 (inch/mm) Chip Ferrite Bead 2500 2000 Impedance () Impedance () 750 BLM18BD421SN1 BLM18BD331SN1 BLM18BD221SN1 BLM18BD151SN1 BLM18BD121SN1 BLM18BD470SN1 500 BLM18BD252SN1 BLM18BD222SN1 BLM18BD182SN1 BLM18BD152SN1 BLM18BD102SN1 BLM18BD601SN1 BLM18BD471SN1 1500 1000 250 500 0 0 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 1000 3000 1000 3000 BLM18BB Series (120ohm to 470ohm) BLM18BB Series (5ohm to 75ohm) Chip EMIFILr 1 2000 300 1500 Impedance () Impedance () 200 BLM18BB750SN1 BLM18BB600SN1 BLM18BB470SN1 BLM18BB220SN1 BLM18BB100SN1 BLM18BB050SN1 100 BLM18BB471SN1 BLM18BB331SN1 BLM18BB221SN1 BLM18BB151SN1 BLM18BB141SN1 BLM18BB121SN1 1000 0 Chip Common Mode Choke Coil 500 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) BLM18BA Series (47ohm to 120ohm) BLM18BA Series (5ohm to 220ohm) 500 10000 400 300 200 BLM18BA220SN1 BLM18BA100SN1 BLM18BA050SN1 5000 BLM18BA121SN1 BLM18BA750SN1 BLM18BA470SN1 Block Type EMIFILr Impedance () Impedance () 7500 2500 100 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM18BD470SN1 BLM18BD121SN1 150 BLM18BD151SN1 300 400 R 50 200 Z R 100 X Z R 200 100 X X 0 1 10 100 Frequency (MHz) 1000 Microwave Absorber Z Impedance () Impedance () Impedance () 300 100 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 59 BLM Series Signal Lines Type Chip Ferrite Bead BLM18B Series 0603/1608 (inch/mm) BLM18B c Impedance-Frequency Characteristics Chip Ferrite Bead 0603/1608 (inch/mm) BLM18BD221SN1 BLM18BD331SN1 600 BLM18BD421SN1 800 1000 800 Z R 200 Impedance () Impedance () Impedance () 600 400 Z R 400 200 X Z 600 R 400 200 X X 1 10 100 Frequency (MHz) 1000 0 3000 BLM18BD471SN1 100 Frequency (MHz) Impedance () 500 10 10 100 Frequency (MHz) R 600 1000 0 3000 BLM18BD152SN1 1000 2400 1500 1800 1000 3000 1000 3000 R 500 1 10 X 100 Frequency (MHz) 1000 0 3000 BLM18BD182SN1 2000 3000 Z X 100 Frequency (MHz) 1000 1500 Z X 1 1 2000 300 250 Chip Common Mode Choke Coil 3000 BLM18BD102SN1 900 Z R 0 1000 1200 750 Impedance () 10 BLM18BD601SN1 1000 Chip EMIFILr 1 0 Impedance () 0 1 10 100 Frequency (MHz) BLM18BD222SN1 2500 R 1000 Z Impedance () Z Impedance () Impedance () 2000 R 1200 600 500 X Z 1500 R 1000 500 X X 1 10 100 Frequency (MHz) 1000 0 3000 BLM18BD252SN1 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) BLM18BB100SN1 60 25 20 Z 1500 Impedance () 2000 Impedance () 10 BLM18BB050SN1 2500 Block Type EMIFILr 1 R 1000 Impedance () 0 Z 15 R 10 X Z 40 R 20 X 5 500 X 1 10 100 Frequency (MHz) 1000 0 3000 BLM18BB220SN1 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 3000 300 200 Impedance () Z R 60 X 30 Z 150 R 100 200 Z R 100 50 X X 0 1000 BLM18BB600SN1 250 90 Impedance () 10 BLM18BB470SN1 120 Microwave Absorber 1 Impedance () 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 60 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM18B Series 0603/1608 (inch/mm) BLM18B c Impedance-Frequency Characteristics BLM18BB121SN1 600 400 R 100 X 450 Z Impedance () 200 Impedance () Z Impedance () BLM18BB141SN1 500 300 0603/1608 (inch/mm) Chip Ferrite Bead BLM18BB750SN1 300 200 X Z R 300 X 150 100 R 10 100 Frequency (MHz) 1000 3000 BLM18BB151SN1 10 100 Frequency (MHz) 1000 0 3000 BLM18BB221SN1 750 Impedance () 450 R 300 X 100 Frequency (MHz) 1000 3000 1000 3000 1200 Z R 500 X 250 150 10 1500 750 Z 1 BLM18BB331SN1 1000 600 Impedance () 1 Chip EMIFILr 1 0 Impedance () 0 Z 900 R 600 300 X 10 100 Frequency (MHz) 1000 3000 BLM18BB471SN1 10 100 Frequency (MHz) 1000 Z Impedance () 1000 Z R 60 30 500 10 100 Frequency (MHz) Z 150 R 100 50 X X X 1 10 200 90 R 1 BLM18BA100SN1 120 1500 0 3000 BLM18BA050SN1 2000 Impedance () 1 0 100 Frequency (MHz) 1000 0 3000 BLM18BA220SN1 1 10 100 Frequency (MHz) 1000 0 3000 BLM18BA470SN1 500 Chip Common Mode Choke Coil 1 0 Impedance () 0 1 10 100 Frequency (MHz) 1000 3000 BLM18BA750SN1 1500 4500 200 1000 500 Z R 3000 1500 100 0 1 10 100 Frequency (MHz) 1000 Z R X 3000 0 1 10 100 Frequency (MHz) X 1000 3000 Block Type EMIFILr Z 300 Impedance () Impedance () Impedance () 400 0 1 10 100 Frequency (MHz) R X 1000 3000 BLM18BA121SN1 7500 Microwave Absorber Impedance () 10000 5000 2500 R Z 0 1 10 100 Frequency (MHz) X 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 61 BLM Series Signal Lines Type Chip Ferrite Bead BLM18T BLM18T Series 0603/1608 (inch/mm) Thin 0603 size for general signal lines. c Dimensions c Equivalent Circuit 0.80.15 0.60.10 Chip Ferrite Bead 0603/1608 (inch/mm) 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.40.2 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18TG121TN1p 120ohm 25% 200mA 0.25ohm max. -55C to +125C BLM18TG221TN1p 220ohm 25% 200mA 0.30ohm max. -55C to +125C BLM18TG601TN1p 600ohm 25% 200mA 0.45ohm max. -55C to +125C BLM18TG102TN1p 1000ohm 25% 100mA 0.60ohm max. -55C to +125C c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics 1200 1000 BLM18TG102TN1 800 BLM18TG601TN1 BLM18TG121TN1 150 BLM18TG221TN1 600 Z 120 BLM18TG121TN1 Impedance () Impedance () Chip Common Mode Choke Coil Number of Circuits: 1 400 200 0 Block Type EMIFILr 1 10 100 Frequency (MHz) 1000 R 90 60 X 30 3000 0 BLM18TG221TN1 BLM18TG601TN1 100 Z 400 R 10 100 Frequency (MHz) 3000 400 X 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 62 1000 R 600 200 X 1 3000 Z 800 200 X 50 Microwave Absorber Impedance () Impedance () Impedance () 150 0 1000 1000 600 R 200 100 Frequency (MHz) 1200 Z 250 10 BLM18TG102TN1 800 300 1 10 100 Frequency (MHz) BLM Series Signal Lines Type Chip Ferrite Bead BLM18R BLM18R Series 0603/1608 (inch/mm) For digital I/F. Reduces the distortion of waveform created by resonance. c Dimensions c Equivalent Circuit 1.60.15 0603/1608 (inch/mm) Chip Ferrite Bead 0.80.15 0.40.2 (Resistance element becomes dominant at high frequencies.) 0.80.15 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18RK121SN1p 120ohm 25% 200mA 0.25ohm max. -55C to +125C BLM18RK221SN1p 220ohm 25% 200mA 0.30ohm max. -55C to +125C BLM18RK471SN1p 470ohm 25% 200mA 0.50ohm max. -55C to +125C BLM18RK601SN1p 600ohm 25% 200mA 0.60ohm max. -55C to +125C BLM18RK102SN1p 1000ohm 25% 200mA 0.80ohm max. -55C to +125C Chip Common Mode Choke Coil c Rated Value (p: packaging code) Number of Circuits: 1 c Impedance-Frequency Characteristics 1200 Impedance () 900 BLM18RK102SN1 BLM18RK601SN1 BLM18RK471SN1 BLM18RK221SN1 BLM18RK121SN1 600 Block Type EMIFILr 300 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18RK221SN1 200 600 Z 100 R 50 450 Z 200 Impedance () Impedance () 150 Impedance () BLM18RK471SN1 300 R 100 R 300 150 X X Z Microwave Absorber BLM18RK121SN1 X 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 63 BLM Series Signal Lines Type Chip Ferrite Bead BLM18R Series 0603/1608 (inch/mm) BLM18R c Impedance-Frequency Characteristics Chip Ferrite Bead 0603/1608 (inch/mm) BLM18RK601SN1 BLM18RK102SN1 1200 800 1000 Impedance () Impedance () 600 Z 400 R 800 Z 600 R 400 200 X 200 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 64 EMI Suppression BLMppR Series Effect Waveform Distortion Suppressing Performance of BLMppR Series Measuring Circuits Measuring Point AC04 Type of Filter Chip Ferrite Bead 1MHz AC00 Pattern20cm Filter EMI Suppression Effect / Description Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum 85 Initial (No filter) 75 70 Chip EMIFILr Level (dBV) 80 65 60 55 50 45 30 50 100 150 200 250 Frequency (MHz) 300 100 150 200 250 Frequency (MHz) 300 100 150 200 250 Frequency (MHz) 300 Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Chip Common Mode Choke Coil Ringing is caused on the signal waveform. Such ringing contains several hundred MHz harmonic components and generates noise. Spectrum 85 Resister (47) is used 75 70 65 60 55 50 45 30 50 Block Type EMIFILr Level (dBV) 80 Comparing initial waveform, ringing is suppressed a little. However, high level waveform distortion still remains. Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum 85 75 70 65 60 55 50 45 30 50 BLM18R has excellent performance for noise suppression and waveform distortion suppression. BLM18R suppresses drastically not only the spectrum level in more than 100MHz range but waveform distortion. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 65 Microwave Absorber BLM18RK221SN1 (220 at 100MHz) is used Level (dBV) 80 BLM Series Power Lines Type Chip Ferrite Bead BLM21P BLM21P Series 0805/2012 (inch/mm) 0805 size for power lines. *Please refer to the products designed for both power lines and signal lines. *Please refer to BLM18K for downsizing. c Dimensions c Equivalent Circuit 0.850.2 Chip Ferrite Bead 0805/2012 (inch/mm) 0.50.2 2.00.2 (Resistance element becomes dominant at high frequencies.) 1.250.2 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 EIA CODE : 0805 : Electrode (in mm) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM21PG220SN1p 22ohm 25% 6000mA 0.009ohm max. -55C to +125C BLM21PG300SN1p 30ohm (Typ.) 4000mA 0.014ohm max. -55C to +125C BLM21PG600SN1p 60ohm 25% 3500mA 0.02ohm max. -55C to +125C BLM21PG121SN1p 120ohm 25% 3000mA 0.03ohm max. -55C to +125C BLM21PG221SN1p 220ohm 25% 2000mA 0.045ohm max. -55C to +125C BLM21PG331SN1p 330ohm 25% 1500mA 0.07ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 500 400 BLM21PG221SN1 300 BLM21PG121SN1 BLM21PG600SN1 200 Derating of Rated Current BLM21PG300SN1 BLM21PG220SN1 100 Block Type EMIFILr c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BLM21PG series. Please apply the derating curve shown in chart according to the operating temperature. BLM21PG331SN1 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) 6000 0 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) 1 4000 3500 3000 Microwave Absorber 2000 1500 1000 0 0 85 125 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 66 BLM Series Power Lines Type Chip Ferrite Bead BLM21P Series 0805/2012 (inch/mm) BLM21P c Impedance-Frequency Characteristics BLM21PG300SN1 40 R 10 10 100 Frequency (MHz) R 20 X 1000 0 3000 BLM21PG121SN1 1 10 100 Frequency (MHz) 1000 10 100 Frequency (MHz) 1000 3000 1000 3000 BLM21PG331SN1 500 240 R 80 X 400 Impedance () Impedance () 120 R 180 120 R 300 Z 200 X 40 60 1000 3000 0 X 100 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 100 Frequency (MHz) 1 Z Z 10 X 0 3000 300 1 R 40 20 BLM21PG221SN1 160 Z 60 Chip EMIFILr 1 30 80 10 X Impedance () Z Impedance () Impedance () Impedance () Z 20 0 100 40 30 0 BLM21PG600SN1 50 0805/2012 (inch/mm) Chip Ferrite Bead BLM21PG220SN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 67 BLM Series Signal Lines Type Chip Ferrite Bead BLM21A BLM21A Series 0805/2012 (inch/mm) 0805 size for general signal lines. c Dimensions c Equivalent Circuit 0.850.2 Chip Ferrite Bead 0805/2012 (inch/mm) 0.50.2 2.00.2 (Resistance element becomes dominant at high frequencies.) 1.250.2 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 EIA CODE : 0805 : Electrode (in mm) Block Type EMIFILr Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM21AG121SN1p 120ohm 25% 800mA 0.10ohm max. -55C to +125C BLM21AG151SN1p 150ohm 25% 800mA 0.10ohm max. -55C to +125C BLM21AG221SN1p 220ohm 25% 800mA 0.13ohm max. -55C to +125C BLM21AG331SN1p 330ohm 25% 700mA 0.16ohm max. -55C to +125C BLM21AG471SN1p 470ohm 25% 700mA 0.19ohm max. -55C to +125C BLM21AG601SN1p 600ohm 25% 600mA 0.21ohm max. -55C to +125C BLM21AG102SN1p 1000ohm 25% 500mA 0.28ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1200 BLM21AG102SN1 BLM21AG601SN1 900 BLM21AG471SN1 Impedance () Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) BLM21AG331SN1 BLM21AG221SN1 600 BLM21AG151SN1 BLM21AG121SN1 300 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM21AG121SN1 BLM21AG151SN1 200 BLM21AG221SN1 200 300 Z X 50 0 1 10 100 Frequency (MHz) R 100 X 50 1000 3000 Impedance () R 100 0 Z 240 150 Z Impedance () Microwave Absorber Impedance () 150 R 180 120 X 60 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 68 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM21A Series 0805/2012 (inch/mm) BLM21A c Impedance-Frequency Characteristics BLM21AG471SN1 400 BLM21AG601SN1 600 800 0805/2012 (inch/mm) Chip Ferrite Bead BLM21AG331SN1 Z Z Impedance () Impedance () 450 R 200 X 100 600 R Impedance () Z 300 300 150 R 400 200 X X 0 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 BLM21AG102SN1 1200 Z Chip EMIFILr Impedance () 900 600 R 300 X 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 69 BLM Series Signal Lines Type Chip Ferrite Bead BLM21B BLM21B Series 0805/2012 (inch/mm) 0805 size for high speed signal lines. c Dimensions c Equivalent Circuit T Chip Ferrite Bead 0805/2012 (inch/mm) E 2.00.2 (Resistance element becomes dominant at high frequencies.) 1.250.2 Part Number T c Packaging E BLM21B 0.850.2 0.50.2 (exclude items below) BLM21BD222SN1 1.250.2 0.50.2 BLM21BD272SN1 1.250.2 0.30.2 * All except for BLM21BD222SN1/21BD272SN1 Minimum Code Packaging Quantity : Electrode (in mm) D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 Chip EMIFILr * BLM21BD222SN1/21BD272SN1 only Minimum Code Packaging Quantity L 180mm Reel Plastic Tape 3000 K 330mm Reel Plastic Tape 10000 B Bulk(Bag) 1000 Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM21BD121SN1p 120ohm 25% 200mA 0.25ohm max. -55C to +125C BLM21BD151SN1p 150ohm 25% 200mA 0.25ohm max. -55C to +125C BLM21BD221SN1p 220ohm 25% 200mA 0.25ohm max. -55C to +125C BLM21BD331SN1p 330ohm 25% 200mA 0.30ohm max. -55C to +125C BLM21BD421SN1p 420ohm 25% 200mA 0.30ohm max. -55C to +125C BLM21BD471SN1p 470ohm 25% 200mA 0.35ohm max. -55C to +125C BLM21BD601SN1p 600ohm 25% 200mA 0.35ohm max. -55C to +125C BLM21BD751SN1p 750ohm 25% 200mA 0.40ohm max. -55C to +125C BLM21BD102SN1p 1000ohm 25% 200mA 0.40ohm max. -55C to +125C BLM21BD152SN1p 1500ohm 25% 200mA 0.45ohm max. -55C to +125C BLM21BD182SN1p 1800ohm 25% 200mA 0.50ohm max. -55C to +125C BLM21BD222TN1p 2200ohm 25% 200mA 0.60ohm max. -55C to +125C BLM21BD222SN1p 2250ohm (Typ.) 200mA 0.60ohm max. -55C to +125C BLM21BD272SN1p 2700ohm 25% 200mA 0.80ohm max. -55C to +125C BLM21BB050SN1p 5ohm 25% 1000mA 0.02ohm max. -55C to +125C BLM21BB600SN1p 60ohm 25% 800mA 0.13ohm max. -55C to +125C BLM21BB750SN1p 75ohm 25% 700mA 0.16ohm max. -55C to +125C BLM21BB121SN1p 120ohm 25% 600mA 0.19ohm max. -55C to +125C BLM21BB151SN1p 150ohm 25% 600mA 0.21ohm max. -55C to +125C BLM21BB201SN1p 200ohm 25% 500mA 0.26ohm max. -55C to +125C BLM21BB221SN1p 220ohm 25% 500mA 0.26ohm max. -55C to +125C BLM21BB331SN1p 330ohm 25% 400mA 0.33ohm max. -55C to +125C BLM21BB471SN1p 470ohm 25% 400mA 0.40ohm max. -55C to +125C Number of Circuits: 1 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 70 BLM Series Signal Lines Type Chip Ferrite Bead BLM21B Series 0805/2012 (inch/mm) BLM21B c Impedance-Frequency Characteristics BLM21BD Series BLM21BB Series 3000 2000 BLM21BD222SN1 BLM21BD222TN1 BLM21BD182SN1 BLM21BD152SN1 BLM21BD102SN1 BLM21BD751SN1 BLM21BD601SN1 1800 1600 BLM21BB471SN1 Impedance () Impedance () 2400 BLM21BD471SN1 BLM21BD421SN1 BLM21BD331SN1 BLM21BD221SN1 1200 1200 BLM21BD151SN1 BLM21BD121SN1 600 0805/2012 (inch/mm) Chip Ferrite Bead BLM21BD272SN1 BLM21BB201SN1 BLM21BB331SN1 BLM21BB221SN1 BLM21BB750SN1 BLM21BB151SN1 800 BLM21BB121SN1 BLM21BB600SN1 400 BLM21BB050SN1 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 BLM21BD151SN1 300 Impedance () Z 180 R 120 400 240 Z R 180 120 Z 320 R 240 160 X X 60 0 480 300 X 60 1 10 100 Frequency (MHz) 1000 0 3000 BLM21BD331SN1 1 10 100 Frequency (MHz) 80 1000 BLM21BD421SN1 800 800 600 600 0 3000 1 10 100 Frequency (MHz) 1000 3000 1000 3000 1000 3000 Chip Common Mode Choke Coil Impedance () 240 BLM21BD221SN1 360 Impedance () BLM21BD121SN1 Chip EMIFILr c Impedance-Frequency Characteristics BLM21BD471SN1 900 R 400 X 200 Impedance () Z Impedance () Impedance () 750 Z R 400 X 200 Z 600 R 450 300 X 1 10 100 Frequency (MHz) 1000 0 3000 BLM21BD601SN1 1 10 0 3000 Impedance () R 400 X 200 100 Frequency (MHz) Z 1200 600 10 1600 Z 800 1 BLM21BD102SN1 1500 1000 Impedance () 1000 BLM21BD751SN1 1200 1200 Z 900 R 600 R 800 X 400 300 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber 0 100 Frequency (MHz) Impedance () 0 Block Type EMIFILr 150 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 71 BLM Series Signal Lines Type Chip Ferrite Bead BLM21B Series 0805/2012 (inch/mm) BLM21B c Impedance-Frequency Characteristics BLM21BD152SN1 BLM21BD182SN1 Chip Ferrite Bead 0805/2012 (inch/mm) 2000 BLM21BD222TN1 2400 2400 Z 800 X 400 1600 R 1200 800 400 1 10 100 Frequency (MHz) 1000 0 3000 BLM21BD222SN1 1 10 100 Frequency (MHz) 0 3000 1 10 100 Frequency (MHz) 1000 3000 30 Z 1600 Impedance () Impedance () Chip EMIFILr 800 BLM21BB050SN1 R 1200 800 X 25 Z 2400 R 1600 10 X 15 10 R X 1 Z 20 800 400 100 Frequency (MHz) 1000 0 3000 BLM21BB600SN1 Chip Common Mode Choke Coil 1000 3200 2000 0 R 1200 400 BLM21BD272SN1 2400 1600 X X Impedance () 0 Z Impedance () Impedance () Impedance () R 1200 Z 2000 2000 1600 1 10 5 100 Frequency (MHz) 1000 0 3000 BLM21BB750SN1 10 100 Frequency (MHz) 1000 3000 1000 3000 1000 3000 BLM21BB121SN1 300 300 1 400 Z R 100 Impedance () Impedance () Impedance () 300 200 200 Z R 100 X Z R 200 100 X X 0 1 10 100 Frequency (MHz) 1000 0 3000 BLM21BB151SN1 1 10 100 Frequency (MHz) 1000 BLM21BB201SN1 600 0 3000 200 Z 600 Impedance () Impedance () Impedance () Block Type EMIFILr R 100 Frequency (MHz) 800 Z Z 10 BLM21BB221SN1 600 400 1 400 R 200 X R 400 X 200 X 0 1 10 100 Frequency (MHz) 1000 0 3000 BLM21BB331SN1 100 Frequency (MHz) 1000 3000 1000 3000 0 1 2000 Z Z 1500 Impedance () 900 Impedance () 10 BLM21BB471SN1 1200 Microwave Absorber 1 R 600 X 300 R 1000 500 X 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 72 10 100 Frequency (MHz) BLM Series Signal Lines Type Chip Ferrite Bead BLM21R BLM21R Series 0805/2012 (inch/mm) For digital I/F. Reduces the distortion of waveform created by resonance. c Dimensions c Equivalent Circuit 2.00.2 0805/2012 (inch/mm) Chip Ferrite Bead 0.850.2 0.50.2 (Resistance element becomes dominant at high frequencies.) 1.250.2 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 EIA CODE : 0805 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM21RK121SN1p 120ohm 25% 200mA 0.15ohm max. -55C to +125C BLM21RK221SN1p 220ohm 25% 200mA 0.20ohm max. -55C to +125C BLM21RK471SN1p 470ohm 25% 200mA 0.25ohm max. -55C to +125C BLM21RK601SN1p 600ohm 25% 200mA 0.30ohm max. -55C to +125C BLM21RK102SN1p 1000ohm 25% 200mA 0.50ohm max. -55C to +125C Chip Common Mode Choke Coil c Rated Value (p: packaging code) Number of Circuits: 1 c Impedance-Frequency Characteristics 1200 BLM21RK102SN1 Impedance () 900 BLM21RK601SN1 BLM21RK471SN1 BLM21RK221SN1 600 BLM21RK121SN1 Block Type EMIFILr 300 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM21RK221SN1 150 120 R 90 60 X 30 600 Z Z 240 Z Impedance () Impedance () BLM21RK471SN1 300 450 Impedance () 180 R 180 120 R 300 Microwave Absorber BLM21RK121SN1 150 60 X X 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 73 BLM Series Signal Lines Type Chip Ferrite Bead BLM21R Series 0805/2012 (inch/mm) BLM21R c Impedance-Frequency Characteristics BLM21RK601SN1 BLM21RK102SN1 Chip Ferrite Bead 0805/2012 (inch/mm) 750 1200 Z Z 900 R Impedance () Impedance () 600 450 300 300 150 X X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 0 R 600 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 74 BLM Series Power Lines Type Chip Ferrite Bead BLM31P BLM31P Series 1206/3216 (inch/mm) 1206 size for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit 1206/3216 (inch/mm) Chip Ferrite Bead c Dimensions 1.10.2 0.70.3 3.20.2 (Resistance element becomes dominant at high frequencies.) 1.60.2 c Packaging Code Packaging : Electrode (in mm) Minimum Quantity L 180mm Reel Embossed Tape 3000 K 330mm Reel Embossed Tape 10000 B Bulk(Bag) 1000 Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM31PG330SN1p 33ohm 25% 6000mA 0.009ohm max. -55C to +125C BLM31PG500SN1p 50ohm (Typ.) 3500mA 0.015ohm max. -55C to +125C BLM31PG121SN1p 120ohm 25% 3500mA 0.02ohm max. -55C to +125C BLM31PG391SN1p 390ohm 25% 2000mA 0.05ohm max. -55C to +125C BLM31PG601SN1p 600ohm 25% 1500mA 0.08ohm max. -55C to +125C Chip Common Mode Choke Coil c Rated Value (p: packaging code) Number of Circuits: 1 c Impedance-Frequency Characteristics 800 In operating temperature exceeding +85C, derating of current is necessary for BLM31PG series. Please apply the derating curve shown in chart according to the operating temperature. Impedance () 600 BLM31PG601SN1 BLM31PG391SN1 BLM31PG121SN1 BLM31PG500SN1 BLM31PG330SN1 400 c Notice (Rating) Derating of Rated Current Block Type EMIFILr 200 6000 0 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) 1 3500 2000 Microwave Absorber 1500 1000 0 0 85 125 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 75 BLM Series Power Lines Type Chip Ferrite Bead BLM31P Series 1206/3216 (inch/mm) BLM31P c Impedance-Frequency Characteristics BLM31PG330SN1 BLM31PG500SN1 R 30 20 1 10 100 Frequency (MHz) R 40 X 1000 0 3000 BLM31PG391SN1 Z 120 R 80 X 20 X 10 Impedance () Impedance () 160 60 Impedance () Chip Ferrite Bead 1206/3216 (inch/mm) 200 Z Z 40 0 BLM31PG121SN1 80 50 40 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 BLM31PG601SN1 500 800 Z Z 600 R Impedance () Impedance () Chip EMIFILr 400 300 200 X 100 1 10 100 Frequency (MHz) 200 1000 3000 0 X 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 R 400 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 76 10 100 Frequency (MHz) 1000 3000 BLM Series Power Lines Type Chip Ferrite Bead BLM41P BLM41P Series 1806/4516 (inch/mm) 1806 size for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit 1806/4516 (inch/mm) Chip Ferrite Bead c Dimensions 1.60.2 0.70.3 4.50.2 (Resistance element becomes dominant at high frequencies.) 1.60.2 c Packaging Code Packaging Minimum Quantity 2500 : Electrode (in mm) L 180mm Reel Embossed Tape K 330mm Reel Embossed Tape 8000 B Bulk(Bag) 1000 Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLM41PG600SN1p 60ohm (Typ.) 6000mA 0.009ohm max. -55C to +125C BLM41PG750SN1p 75ohm (Typ.) 3500mA 0.015ohm max. -55C to +125C BLM41PG181SN1p 180ohm 25% 3500mA 0.02ohm max. -55C to +125C BLM41PG471SN1p 470ohm 25% 2000mA 0.05ohm max. -55C to +125C BLM41PG102SN1p 1000ohm 25% 1500mA 0.09ohm max. -55C to +125C Chip Common Mode Choke Coil c Rated Value (p: packaging code) Number of Circuits: 1 c Impedance-Frequency Characteristics c Notice (Rating) BLM41PG Series (60ohm to 75ohm) In operating temperature exceeding +85C, derating of current is necessary for BLM41PG series. Please apply the derating curve shown in chart according to the operating temperature. 150 BLM41PG750SN1 Impedance () 100 BLM41PG600SN1 Derating of Rated Current Block Type EMIFILr 50 6000 0 10 100 Frequency (MHz) 1000 3000 Rated Current (mA) BLM41PG Series (180ohm to 1000ohm) 1200 BLM41PG102SN1 Impedance () 900 BLM41PG471SN1 3500 2000 600 1500 BLM41PG181SN1 Microwave Absorber 1 1000 300 0 0 0 1 10 100 Frequency (MHz) 1000 3000 85 125 Operating Temperature (C) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 77 BLM Series Power Lines Type Chip Ferrite Bead BLM41P Series 1806/4516 (inch/mm) BLM41P c Impedance-Frequency Characteristics BLM41PG600SN1 BLM41PG750SN1 Z 200 R 50 X 25 1 10 100 Frequency (MHz) 1000 3000 BLM41PG471SN1 Z 75 R 50 X 0 0 100 Frequency (MHz) 450 3000 1000 3000 1 Z 900 Impedance () Impedance () 1000 X 1200 Z Chip EMIFILr 100 50 10 R 150 25 1 Z BLM41PG102SN1 600 R 300 X 150 600 R 300 1 10 100 Frequency (MHz) 1000 3000 0 X 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 0 Impedance () Impedance () 250 100 75 0 BLM41PG181SN1 125 Impedance () Chip Ferrite Bead 1806/4516 (inch/mm) 100 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 78 10 100 Frequency (MHz) 1000 3000 BLE Series Power Lines Type Chip Ferrite Bead BLE32P BLE32P Series 1210/3225 (inch/mm) 10A max., large current chip ferrite bead inductor. 1210/3225 (inch/mm) Chip Ferrite Bead c Equivalent Circuit 2.00.2 c Dimensions (Resistance element becomes dominant at high frequencies.) 3.20.2 2.50.2 c Packaging 0.70.3 Code Packaging Minimum Quantity 1500 : Electrode L 180mm Reel Embossed Tape K 330mm Reel Embossed Tape 7000 B Bulk(Bag) 1000 (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLE32PN300SN1p 30ohm 10ohm 10000mA 1.6m ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics Chip Common Mode Choke Coil 80 Impedance () 60 BLE32PN300SN1 40 20 0 1 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr c Impedance-Frequency Characteristics BLE32PN300SN1 80 Impedance () 60 Z 40 R 20 X 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 79 BLA Series Signal Lines Type Chip Ferrite Bead BLA2AA/BLA2AB BLA2AA/BLA2AB Series 0804/2010 (inch/mm) 4-line array, 0804 size. c Equivalent Circuit (2) (3) (4) (5) (6) (7) (8) 2.00.2 (2) (3) (4) (5) (6) (7) No polarity. (8) c Packaging 0.50.1 0.250.15 (1) 1.00.2 (1) 0.20.15 Chip Ferrite Bead 0804/2010 (inch/mm) c Dimensions Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 0.50.1 : Electrode (in mm) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLA2AAG121SN4p 120ohm 25% 100mA 0.50ohm max. -55C to +125C BLA2AAG221SN4p 220ohm 25% 50mA 0.70ohm max. -55C to +125C BLA2AAG601SN4p 600ohm 25% 50mA 1.10ohm max. -55C to +125C BLA2AAG102SN4p 1000ohm 25% 50mA 1.30ohm max. -55C to +125C BLA2ABD750SN4p 75ohm 25% 200mA 0.20ohm max. -55C to +125C BLA2ABD121SN4p 120ohm 25% 200mA 0.35ohm max. -55C to +125C BLA2ABD221SN4p 220ohm 25% 100mA 0.40ohm max. -55C to +125C BLA2ABD471SN4p 470ohm 25% 100mA 0.65ohm max. -55C to +125C BLA2ABD601SN4p 600ohm 25% 100mA 0.80ohm max. -55C to +125C BLA2ABD102SN4p 1000ohm 25% 50mA 1.00ohm max. -55C to +125C BLA2ABB100SN4p 10ohm 25% 200mA 0.1ohm max. -55C to +125C BLA2ABB220SN4p 22ohm 25% 200mA 0.2ohm max. -55C to +125C BLA2ABB470SN4p 47ohm 25% 200mA 0.35ohm max. -55C to +125C BLA2ABB121SN4p 120ohm 25% 50mA 0.60ohm max. -55C to +125C BLA2ABB221SN4p 220ohm 25% 50mA 0.90ohm max. -55C to +125C c Impedance-Frequency Characteristics BLA2AAG Series BLA2ABD Series 1200 1600 BLA2ABD102SN4 BLA2AAG102SN4 1200 900 BLA2ABD601SN4 Impedance () BLA2AAG601SN Impedance () Block Type EMIFILr Number of Circuits: 4 BLA2AAG221SN4 600 BLA2AAG121SN4 BLA2ABD471SN4 800 BLA2ABD221SN4 BLA2ABD121SN4 400 300 Microwave Absorber BLA2ABD750SN4 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 80 BLA Series Signal Lines Type Chip Ferrite Bead BLA2AA/BLA2AB Series 0804/2010 (inch/mm) BLA2AA/BLA2AB c Impedance-Frequency Characteristics BLA2ABB Series 0804/2010 (inch/mm) Chip Ferrite Bead 1000 BLA2ABB221SN4 Impedance () 800 BLA2ABB121SN4 600 BLA2ABB470SN4 400 BLA2ABB220SN4 200 BLA2ABB100SN4 0 1 10 100 Frequency (MHz) 1000 3000 BLA2AAG221SN4 200 Z 800 300 Impedance () 120 1000 R 80 X Z Impedance () 160 Impedance () BLA2AAG601SN4 400 R 200 X 100 R 400 X 200 40 0 Z 600 1 10 100 Frequency (MHz) 1000 0 3000 BLA2AAG102SN4 1 10 100 Frequency (MHz) 1000 BLA2ABD750SN4 1250 0 3000 1 10 100 Frequency (MHz) 1000 3000 1000 3000 1000 3000 Chip Common Mode Choke Coil BLA2AAG121SN4 Chip EMIFILr c Impedance-Frequency Characteristics BLA2ABD121SN4 300 200 Z 240 R 750 500 Z 100 R 180 Z R 120 X X 50 250 Impedance () 150 Impedance () Impedance () 1000 60 X 10 100 Frequency (MHz) 1000 0 3000 BLA2ABD221SN4 100 Frequency (MHz) 1000 0 3000 Impedance () Z R 200 X 10 100 Frequency (MHz) R 400 X 1000 3000 0 600 R 400 X 200 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber 1 100 Frequency (MHz) Z 800 Z 200 100 10 1000 600 300 1 BLA2ABD601SN4 800 400 Impedance () 10 BLA2ABD471SN4 500 0 1 Block Type EMIFILr 1 Impedance () 0 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 81 BLA Series Signal Lines Type Chip Ferrite Bead BLA2AA/BLA2AB Series 0804/2010 (inch/mm) BLA2AA/BLA2AB c Impedance-Frequency Characteristics Chip Ferrite Bead 0804/2010 (inch/mm) BLA2ABD102SN4 BLA2ABB100SN4 BLA2ABB220SN4 50 1600 125 Z R 800 X 1 10 100 Frequency (MHz) 1000 0 3000 R 50 X 1 10 100 Frequency (MHz) 1000 0 3000 R 100 X 10 100 Frequency (MHz) 1000 3000 300 R 0 3000 X 1 10 100 Frequency (MHz) 1000 3000 R 400 X 200 1000 3000 0 1 Block Type EMIFILr Microwave Absorber !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 82 1000 Z 600 Chip Common Mode Choke Coil 1 Z 150 50 100 Frequency (MHz) 800 Impedance () Impedance () Z 10 1000 450 150 1 BLA2ABB221SN4 600 200 Impedance () Z 75 25 BLA2ABB121SN4 250 Chip EMIFILr 20 10 BLA2ABB470SN4 0 R 30 X 400 0 100 Impedance () Impedance () Impedance () 40 Z 1200 10 100 Frequency (MHz) BLA Series Signal Lines Type Chip Ferrite Bead BLA31A/BLA31B BLA31A/BLA31B Series 1206/3216 (inch/mm) 4-line array, 1206 size. c Equivalent Circuit (2) (3) (4) (5) (6) (7) (8) (2) (3) (4) (5) (6) (7) No polarity. (8) c Packaging 0.80.2 0.40.2 (1) 1.60.2 0.30.2 (1) 1206/3216 (inch/mm) Chip Ferrite Bead c Dimensions Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 0.80.1 3.20.2 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. Part Number Impedance (at 100MHz/20C) Rated Current DC Resistance Operating Temperature Range BLA31AG300SN4p 30ohm 25% 200mA 0.10ohm max. -55C to +125C BLA31AG600SN4p 60ohm 25% 200mA 0.15ohm max. -55C to +125C BLA31AG121SN4p 120ohm 25% 150mA 0.20ohm max. -55C to +125C BLA31AG221SN4p 220ohm 25% 150mA 0.25ohm max. -55C to +125C BLA31AG601SN4p 600ohm 25% 100mA 0.35ohm max. -55C to +125C BLA31AG102SN4p 1000ohm 25% 50mA 0.45ohm max. -55C to +125C BLA31BD121SN4p 120ohm 25% 150mA 0.30ohm max. -55C to +125C BLA31BD221SN4p 220ohm 25% 150mA 0.35ohm max. -55C to +125C BLA31BD471SN4p 470ohm 25% 100mA 0.40ohm max. -55C to +125C BLA31BD601SN4p 600ohm 25% 100mA 0.45ohm max. -55C to +125C BLA31BD102SN4p 1000ohm 25% 50mA 0.55ohm max. -55C to +125C Chip Common Mode Choke Coil c Rated Value (p: packaging code) Number of Circuits: 4 c Impedance-Frequency Characteristics BLA31AG Series BLA31BD Series 1200 1500 Block Type EMIFILr 1200 Impedance () Impedance () 900 BLA31AG102SN4 BLA31AG601SN4 BLA31AG221SN4 BLA31AG121SN4 BLA31AG600SN4 BLA31AG300SN4 600 900 BLA31BD102SN4 BLA31BD601SN4 BLA31BD471SN4 BLA31BD221SN4 BLA31BD121SN4 600 300 300 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 83 BLA Series Signal Lines Type Chip Ferrite Bead BLA31A/BLA31B Series 1206/3216 (inch/mm) BLA31A/BLA31B c Impedance-Frequency Characteristics BLA31AG300SN4 BLA31AG600SN4 160 Z Z 20 X 10 120 R 40 X 20 1 10 100 Frequency (MHz) 1000 0 3000 BLA31AG221SN4 1 10 100 Frequency (MHz) 1000 80 X 0 3000 1 10 100 Frequency (MHz) 3000 1000 3000 1000 3000 1200 Z Z Impedance () 600 R 200 1000 BLA31AG102SN4 800 250 Impedance () R 40 BLA31AG601SN4 300 Chip EMIFILr Impedance () R 0 Z 60 Impedance () Impedance () 30 150 100 R 400 X 200 X 900 Z Impedance () Chip Ferrite Bead 1206/3216 (inch/mm) BLA31AG121SN4 80 40 R 600 300 X 50 1 10 100 Frequency (MHz) 1000 BLA31BD121SN4 Chip Common Mode Choke Coil 0 3000 100 Frequency (MHz) 1000 0 3000 Impedance () Z 150 R 100 X 1 10 100 Frequency (MHz) 1000 Z 300 R 200 X 0 3000 BLA31BD601SN4 600 R 450 300 X 150 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 1 BLA31BD102SN4 1200 1500 Z Impedance () Impedance () Block Type EMIFILr 1250 Z 900 R 600 X 300 1000 R 750 500 X 250 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 84 100 Frequency (MHz) Z 750 100 50 10 900 400 200 1 BLA31BD471SN4 500 250 Impedance () 10 BLA31BD221SN4 300 0 1 Impedance () 0 10 100 Frequency (MHz) BLM Series Signal Lines Type Chip Ferrite Bead BLM03H BLM03H Series 0201/0603 (inch/mm) 0201 size for GHz band noise. c Equivalent Circuit 0.30.03 0.30.03 0.60.03 0201/0603 (inch/mm) Chip Ferrite Bead c Dimensions (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) BLM03HG601SN1p 600ohm 25% 1000ohm 40% 150mA 1.6ohm max. -55C to +125C BLM03HG102SN1p 1000ohm 25% 1800ohm 40% 125mA 2.6ohm max. -55C to +125C BLM03HG122SN1p 1200ohm 25% 2000ohm 40% 100mA 3.5ohm max. -55C to +125C BLM03HD331SN1p 330ohm 25% 750ohm 40% 200mA 1.0ohm max. -55C to +125C BLM03HD471SN1p 470ohm 25% 1000ohm 40% 175mA 1.3ohm max. -55C to +125C BLM03HD601SN1p 600ohm 25% 1500ohm 40% 150mA 1.7ohm max. -55C to +125C BLM03HD102SN1p 1000ohm 25% 2300ohm 40% 120mA 2.9ohm max. -55C to +125C BLM03HB191SN1p 190ohm 25% 1150ohm 40% 150mA 2.0ohm max. -55C to +125C Rated Current DC Resistance Chip Common Mode Choke Coil Operating Temperature Range Part Number Number of Circuits: 1 c Impedance-Frequency Characteristics BLM03HG Series BLM03HD Series 2500 2500 2000 2000 1000 1500 BLM03HD601SN1 Block Type EMIFILr 1500 Impedance () Impedance () BLM03HD102SN1 BLM03HG122SN1 BLM03HG102SN1 BLM03HG601SN1 BLM03HD471SN1 1000 BLM03HD331SN1 500 500 0 0 1 10 100 Frequency (MHz) 1000 3000 1000 3000 1 10 100 Frequency (MHz) 1000 3000 BLM03HB Series 1600 Microwave Absorber Impedance () 1200 800 BLM03HB191SN1 400 0 1 !Note 10 100 Frequency (MHz) Continued on the following page. * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 85 BLM Series Signal Lines Type Chip Ferrite Bead BLM03H Series 0201/0603 (inch/mm) BLM03H c Impedance-Frequency Characteristics BLM03HG102SN1 R 600 X 300 1 10 100 Frequency (MHz) 1000 R 1000 X 1 10 100 Frequency (MHz) 1000 0 3000 1 Z 600 R 100 Frequency (MHz) 1000 3000 1000 3000 BLM03HD601SN1 1800 Z 900 R 600 1200 Z R 600 X X X 300 1 10 100 Frequency (MHz) 1000 0 3000 BLM03HD102SN1 1 10 100 Frequency (MHz) 1000 3000 0 1 BLM03HB191SN1 1600 2500 Z 2000 Z Impedance () 1500 1200 R 1000 X 10 100 Frequency (MHz) X 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr 1 R 800 400 500 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 86 10 1200 300 Impedance () Z 500 1500 Impedance () Impedance () Chip EMIFILr 1500 X BLM03HD471SN1 900 Chip Common Mode Choke Coil R 1000 0 3000 1200 0 2000 Z 500 BLM03HD331SN1 0 2500 1500 Z Impedance () Impedance () 900 0 BLM03HG122SN1 2000 Impedance () 1200 Impedance () Chip Ferrite Bead 0201/0603 (inch/mm) BLM03HG601SN1 10 100 Frequency (MHz) BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM03E BLM03E Series 0201/0603 (inch/mm) For GHz band noise and capable of large current. c Equivalent Circuit 0.30.03 0.30.03 0.60.03 0201/0603 (inch/mm) Chip Ferrite Bead c Dimensions (Resistance element becomes dominant at high frequencies.) 0.150.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range BLM03EB250SN1p 25ohm 25% 105ohm 40% 600mA 0.26ohm max. -55C to +125C BLM03EB500SN1p 50ohm 25% 255ohm 40% 400mA 0.58ohm max. -55C to +125C Number of Circuits: 1 c Notice (Rating) 400 In operating temperature exceeding +85C, derating of current is necessary for BLM03E series. Please apply the derating curve shown in chart according to the operating temperature. 300 200 BLM03EB500SN1 Derating of Rated Current BLM03EB250SN1 700 Rated Current (mA) 100 0 1 10 100 Frequency (MHz) 1000 3000 BLM03EB250SN1 600 500 BLM03EB500SN1 400 300 Block Type EMIFILr Impedance () Chip Common Mode Choke Coil c Impedance-Frequency Characteristics 200 100 0 0 50 85 100 125 Operating Temperature (C) 150 c Impedance-Frequency Characteristics BLM03EB250SN1 BLM03EB500SN1 160 400 Z Z R 80 X 40 0 Microwave Absorber 300 Impedance () Impedance () 120 R 200 X 100 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 87 BLM Series Signal Lines Type Chip Ferrite Bead BLM15H BLM15H Series 0402/1005 (inch/mm) 0402 size for GHz band noise. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Operating Temperature Range Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) BLM15HG601SN1p 600ohm 25% 1000ohm 40% BLM15HG102SN1p 1000ohm 25% 1400ohm 40% 250mA 1.1ohm max. -55C to +125C BLM15HD601SN1p 600ohm 25% 1400ohm 40% 300mA 0.85ohm max. -55C to +125C BLM15HD102SN1p 1000ohm 25% 2000ohm 40% 250mA 1.25ohm max. -55C to +125C BLM15HD182SN1p 1800ohm 25% 2700ohm 40% 200mA 2.2ohm max. -55C to +125C BLM15HB121SN1p 120ohm 25% 500ohm 40% 300mA 0.7ohm max. -55C to +125C BLM15HB221SN1p 220ohm 25% 900ohm 40% 250mA 1.0ohm max. -55C to +125C Rated Current DC Resistance 300mA 0.7ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics BLM15HG Series (For General Signal Lines) BLM15HD Series (For High Speed Signal Lines) 1800 4000 BLM15HD182SN1 1500 3000 BLM15HG102SN1 Impedance () Impedance () Block Type EMIFILr 1200 BLM15HG601SN1 900 BLM15HD102SN1 2000 600 BLM15HD601SN1 1000 300 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 BLM15HB Series (For High Speed Signal Lines) 1200 1000 Impedance () Microwave Absorber 800 BLM15HB221SN1 600 BLM15HB121SN1 400 200 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note 88 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLM Series Signal Lines Type Chip Ferrite Bead BLM15H Series 0402/1005 (inch/mm) BLM15H c Impedance-Frequency Characteristics BLM15HG102SN1 1200 2000 900 1500 BLM15HD601SN1 0402/1005 (inch/mm) Chip Ferrite Bead BLM15HG601SN1 1500 600 R 300 Z 1000 R X 10 100 Frequency (MHz) 1000 0 3000 BLM15HD102SN1 Z R 1000 X 500 0 Impedance () Impedance () 2000 1500 1 10 1 10 100 Frequency (MHz) 1000 800 3000 600 Z R 2000 1000 3000 X 0 1 10 100 Frequency (MHz) 10 3000 Z R 400 X 200 1 1000 BLM15HB121SN1 4000 1000 100 Frequency (MHz) 0 3000 BLM15HD182SN1 2500 R 500 250 Impedance () 1 Z 750 X 500 X 0 1000 100 Frequency (MHz) 1000 3000 Chip EMIFILr Z Impedance () Impedance () Impedance () 1250 0 1 10 100 Frequency (MHz) 1000 3000 Chip Common Mode Choke Coil BLM15HB221SN1 1200 Impedance () 1000 800 R Z 600 400 X 200 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 89 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM15E BLM15E Series 0402/1005 (inch/mm) For GHz band noise, also capable to large current. c Dimensions c Equivalent Circuit 0.50.05 Chip Ferrite Bead 0402/1005 (inch/mm) 0.250.1 1.00.05 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range BLM15EG121SN1p 120ohm 25% 145ohm (Typ.) 1500mA 0.095ohm max. -55C to +125C BLM15EG221SN1p 220ohm 25% 270ohm (Typ.) 700mA 0.28ohm max. -55C to +125C c Impedance-Frequency Characteristics c Notice (Rating) 300 In operating temperature exceeding +85C, derating of current is necessary for BLM15E series. Please apply the derating curve shown in chart according to the operating temperature. 200 BLM15EG221SN1 BLM15EG121SN1 Derating of Rated Current Rated Current (mA) 100 0 Block Type EMIFILr 1 10 100 Frequency (MHz) 1000 3000 BLM15EG121SN1 1500 900 0 0 85 125 Operating Temperature (C) Rated Current (mA) Impedance () Chip Common Mode Choke Coil Number of Circuits: 1 BLM15EG221SN1 700 500 0 0 c Impedance-Frequency Characteristics BLM15EG121SN1 BLM15EG221SN1 300 200 Z Z Impedance () Microwave Absorber Impedance () 150 R 100 X 50 0 1 10 100 Frequency (MHz) 1000 3000 200 R 100 0 X 1 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 90 85 125 Operating Temperature (C) BLM Series Signal Lines Type Chip Ferrite Bead BLM15G BLM15G Series 0402/1005 (inch/mm) Available up to high-GHz band noise. c Dimensions c Equivalent Circuit 1.00.05 0402/1005 (inch/mm) Chip Ferrite Bead 0.50.05 0.250.1 (Resistance element becomes dominant at high frequencies.) 0.50.05 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 J 330mm Reel Paper Tape 50000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Operating Temperature Range Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) BLM15GG221SN1p 220ohm 25% 600ohm 40% 300mA 0.7ohm max. -55C to +125C BLM15GG471SN1p 470ohm 25% 1200ohm 40% 200mA 1.3ohm max. -55C to +125C BLM15GA750SN1p 75ohm 25% 1000ohm 40% 200mA 1.3ohm max. -55C to +125C Rated Current DC Resistance Chip Common Mode Choke Coil Number of Circuits: 1 c Impedance-Frequency Characteristics 2500 Impedance () 2000 1500 BLM15GG471SN1 BLM15GG221SN1 1000 BLM15GA750SN1 500 0 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr 1 c Impedance-Frequency Characteristics BLM15GG471SN1 Z R 600 300 10 100 Frequency (MHz) 1000 750 500 3000 0 Z 1500 R 1000 X 500 250 X 1 2000 R 1000 Impedance () 900 Impedance () Impedance () 2500 Z 1250 1200 0 BLM15GA750SN1 1500 1500 X 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 Microwave Absorber BLM15GG221SN1 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 91 BLM Series Signal Lines Type Chip Ferrite Bead BLM18H BLM18H Series 0603/1608 (inch/mm) 0603 size for GHz band noise. BLM18HE also supports power lines. *Please refer to BLM15H for downsizing. Chip Ferrite Bead 0603/1608 (inch/mm) c Dimensions c Equivalent Circuit 0.80.15 0.40.2 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.80.15 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Operating Temperature Range Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) BLM18HG471SN1p 470ohm 25% 600ohm (Typ.) 200mA 0.85ohm max. -55C to +125C Rated Current DC Resistance BLM18HG601SN1p 600ohm 25% 700ohm (Typ.) 200mA 1.00ohm max. -55C to +125C BLM18HG102SN1p 1000ohm 25% 1000ohm (Typ.) 100mA 1.60ohm max. -55C to +125C BLM18HE601SN1p 600ohm 25% 600ohm (Typ.) 800mA 0.25ohm max. -55C to +125C BLM18HE102SN1p 1000ohm 25% 1000ohm (Typ.) 600mA 0.35ohm max. -55C to +125C BLM18HE152SN1p 1500ohm 25% 1500ohm (Typ.) 500mA 0.50ohm max. -55C to +125C BLM18HD471SN1p 470ohm 25% 1000ohm (Typ.) 100mA 1.20ohm max. -55C to +125C BLM18HD601SN1p 600ohm 25% 1200ohm (Typ.) 100mA 1.50ohm max. -55C to +125C BLM18HD102SN1p 1000ohm 25% 1700ohm (Typ.) 50mA 1.80ohm max. -55C to +125C BLM18HB121SN1p 120ohm 25% 500ohm 40% 200mA 0.50ohm max. -55C to +125C BLM18HB221SN1p 220ohm 25% 1100ohm 40% 100mA 0.80ohm max. -55C to +125C BLM18HB331SN1p 330ohm 25% 1600ohm 40% 50mA 1.20ohm max. -55C to +125C BLM18HK331SN1p 330ohm 25% 400ohm 40% 200mA 0.50ohm max. -55C to +125C BLM18HK471SN1p 470ohm 25% 600ohm 40% 200mA 0.70ohm max. -55C to +125C BLM18HK601SN1p 600ohm 25% 700ohm 40% 100mA 0.90ohm max. -55C to +125C BLM18HK102SN1p 1000ohm 25% 1200ohm 40% 50mA 1.50ohm max. -55C to +125C c Impedance-Frequency Characteristics BLM18HG Series (For General Signal Lines) BLM18HE Series (For High Speed Signal Lines) 2500 2000 BLM18HE152SN1 BLM18HG102SN1 Impedance () 1500 2000 BLM18HG601SN1 BLM18HG471SN1 Impedance () Block Type EMIFILr Number of Circuits: 1 1000 BLM18HE102SN1 1500 BLM18HE601SN1 1000 Microwave Absorber 500 500 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 92 BLM Series Signal Lines Type Chip Ferrite Bead BLM18H Series 0603/1608 (inch/mm) BLM18H c Impedance-Frequency Characteristics BLM18HD Series (For High Speed Signal Lines) BLM18HB Series (For High Speed Signal Lines) BLM18HD102SN1 2500 1500 BLM18HD601SN1 2000 BLM18HD471SN1 Impedance () Impedance () 0603/1608 (inch/mm) Chip Ferrite Bead 2000 3000 1500 BLM18HB331SN1 1000 BLM18HB221SN1 1000 BLM18HB121SN1 500 500 0 10 100 Frequency (MHz) 1000 3000 1 1500 BLM18HK601SN1 BLM18HK471SN1 3000 BLM18HK331SN1 600 Derating of Rated Current 300 0 100 Frequency (MHz) 1000 3000 600 500 400 0 c Impedance-Frequency Characteristics BLM18HG471SN1 BLM18HG102SN1 1200 2000 900 Impedance () 750 Z 500 R X 250 1 10 100 Frequency (MHz) 1500 Z 600 R X 300 1000 0 3000 BLM18HE601SN1 1 10 100 Frequency (MHz) 1000 Impedance () 600 R 400 X 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 1000 3000 2000 Z 1000 R 0 X 2500 X 500 200 R BLM18HE152SN1 1500 Z 1000 0 3000 2000 800 Z 500 BLM18HE102SN1 1000 0 85 125 Operating Temperature (C) BLM18HG601SN1 1000 0 0 Block Type EMIFILr 10 Z Microwave Absorber 1 Chip Common Mode Choke Coil Rated Current (mA) 800 Impedance () Impedance () 900 Impedance () 1000 In operating temperature exceeding +85C, derating of current is necessary for BLM18HE series. Please apply the derating curve shown in chart according to the operating temperature. BLM18HK102SN1 Impedance () 100 Frequency (MHz) c Notice (Rating) BLM18HK Series (For Digital Interface Lines) 1200 10 Chip EMIFILr 1 Impedance () 0 1500 R 1000 X 500 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 93 BLM Series Signal Lines Type Chip Ferrite Bead BLM18H Series 0603/1608 (inch/mm) BLM18H c Impedance-Frequency Characteristics BLM18HD601SN1 Impedance () Z 1200 Impedance () BLM18HD102SN1 2000 1600 R 800 X 3000 2500 Z 1500 Impedance () Chip Ferrite Bead 0603/1608 (inch/mm) BLM18HD471SN1 R 1000 X 400 500 0 0 Z 2000 R 1500 X 1000 500 1 10 100 Frequency (MHz) 1000 3000 BLM18HB121SN1 Z 500 R 10 100 Frequency (MHz) 1000 R 500 X 3000 BLM18HK331SN1 1 10 100 Frequency (MHz) 1000 Impedance () R 300 300 X 10 100 Frequency (MHz) 1000 3000 1000 3000 0 X 600 1 1 10 100 Frequency (MHz) 1000 3000 0 1 Impedance () Block Type EMIFILr R 500 X 250 100 Frequency (MHz) Microwave Absorber 10 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 94 1000 3000 200 Z 1 3000 R 750 0 1000 400 1500 1000 100 Frequency (MHz) Z 600 BLM18HK102SN1 1250 10 X 150 1 R 900 800 R 450 X 150 Z 1000 Z 600 Z 3000 BLM18HK601SN1 750 450 1000 1200 0 3000 BLM18HK471SN1 600 100 Frequency (MHz) 300 Impedance () 1 10 1500 750 0 1 1800 Z 250 X Impedance () 0 3000 Impedance () Impedance () Impedance () Chip EMIFILr 1000 BLM18HB331SN1 1000 250 Chip Common Mode Choke Coil 100 Frequency (MHz) 1250 750 0 10 BLM18HB221SN1 1000 0 1 10 100 Frequency (MHz) BLM18H Series Testing Circuit Noise Suppression of BLM18H in UHF Range 74HCU04 74AC04 Measured radiation at 3m distance 74HC00 Chip Ferrite Bead EMI Suppression Effect BLM 10MHz Type of Filter EMI Suppression Effect / Description 70 Initial (No filter) 50 40 Chip EMIFILr Level (dBV/m) 60 30 20 10 300 400 500 600 700 800 Frequency (MHz) 900 1000 70 Level (dBV/m) Conventional Type BLM18AG102SN1 (1000 at 100MHz) Chip Common Mode Choke Coil Current BLM18AG are effective in suppressing noise in the range between 300MHz and 700MHz. 60 50 Initial 40 30 20 400 500 600 700 800 Frequency (MHz) 900 1000 70 In addition to the effectiveness of current BLM, BLM18HG suppresses noise in the range beyond 700MHz. Level (dBV/m) 60 for GHz Noise Suppression BLM18HG102SN1 (1000 at 100MHz) 50 Block Type EMIFILr 10 300 Initial 40 BLM18AG102SN1 30 20 10 300 400 500 600 700 800 Frequency (MHz) 900 1000 Comparison between BLM18HG102SN1 and BLM18AG102SN1 (Current Item) BLM18HG102SN1 1500 Microwave Absorber Impedance () 2000 BLM18AG102SN1 1000 500 0 1 10 100 1000 2000 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 95 BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM18E BLM18E Series 0603/1608 (inch/mm) For GHz band noise, also capable to large current. c Dimensions c Equivalent Circuit 0.80.15 T Chip Ferrite Bead 0603/1608 (inch/mm) 1.60.15 (Resistance element becomes dominant at high frequencies.) 0.40.2 c Packaging Part Number T BLM18EGpppTN1 0.50.15 BLM18EGpppSN1 0.80.15 : Electrode (in mm) Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18EG101TN1p 100ohm 25% 140ohm (Typ.) 2000mA 0.045ohm max. -55C to +125C BLM18EG121SN1p 120ohm 25% 145ohm (Typ.) 2000mA 0.04ohm max. -55C to +125C BLM18EG221SN1p 220ohm 25% 260ohm (Typ.) 2000mA 0.05ohm max. -55C to +125C BLM18EG221TN1p 220ohm 25% 300ohm (Typ.) 1000mA 0.15ohm max. -55C to +125C BLM18EG331TN1p 330ohm 25% 450ohm (Typ.) 500mA 0.21ohm max. -55C to +125C BLM18EG391TN1p 390ohm 25% 520ohm (Typ.) 500mA 0.3ohm max. -55C to +125C BLM18EG471SN1p 470ohm 25% 550ohm (Typ.) 500mA 0.21ohm max. -55C to +125C BLM18EG601SN1p 600ohm 25% 700ohm (Typ.) 500mA 0.35ohm max. -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics c Notice (Rating) BLM18EG_TN1 Series In operating temperature exceeding +85C, derating of current is necessary for BLM18EG series. Please apply the derating curve shown in chart according to the operating temperature. 1000 Impedance () Block Type EMIFILr 800 BLM18EG391TN1 600 BLM18EG331TN1 Derating of Rated Current BLM18EG221TN1 400 BLM18EG101TN1 200 0 1 10 100 Frequency (MHz) 1000 3000 BLM18EG_SN1 Series 1000 Impedance () Microwave Absorber 2000 1000 500 BLM18EG601SN1 800 Rated Current (mA) Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) 0 BLM18EG471SN1 0 85 125 Operating Temperature (C) 600 BLM18EG221SN1 BLM18EG121SN1 400 200 0 1 !Note 96 10 100 Frequency (MHz) 1000 3000 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued on the following page. BLM Series Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead BLM18E Series 0603/1608 (inch/mm) BLM18E c Impedance-Frequency Characteristics BLM18EG121SN1 150 BLM18EG221SN1 400 200 Z 160 300 75 X 50 1 10 100 Frequency (MHz) 1000 1 10 100 Frequency (MHz) 1000 0 3000 R X 100 10 100 Frequency (MHz) 1000 BLM18EG471SN1 10 100 Frequency (MHz) 1000 3000 1000 3000 750 R 300 200 0 3000 1 1000 X 500 Z R 250 100 1 X Z Impedance () Impedance () 200 R 200 BLM18EG391TN1 400 Z Z 100 500 300 Impedance () X BLM18EG331TN1 400 1 10 100 Frequency (MHz) 1000 3000 1000 3000 0 X 1 10 100 Frequency (MHz) BLM18EG601SN1 800 1000 800 Impedance () Z 600 Impedance () 80 0 3000 BLM18EG221TN1 R 400 X 200 Z 600 R 400 X 200 1 10 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr 0 R 40 25 0 120 Chip EMIFILr R Impedance () Impedance () Impedance () Z 100 Chip Common Mode Choke Coil 125 0 0603/1608 (inch/mm) Chip Ferrite Bead BLM18EG101TN1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 97 BLM Series Signal Lines Type Chip Ferrite Bead BLM18G BLM18G Series 0603/1608 (inch/mm) Available up to high-GHz band noise. c Dimensions c Equivalent Circuit 0.80.1 Chip Ferrite Bead 0603/1608 (inch/mm) 0.350.15 1.60.1 (Resistance element becomes dominant at high frequencies.) 0.80.1 c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 J 330mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode (in mm) Chip EMIFILr Refer to pages from p.100 to p.103 for mounting information. c Rated Value (p: packaging code) Part Number Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18GG471SN1p 470ohm 25% 1800ohm 30% 200mA 1.0ohm 0.3ohm -55C to +125C Number of Circuits: 1 c Impedance-Frequency Characteristics 1500 Impedance () Chip Common Mode Choke Coil 2000 1000 BLM18GG471SN1 500 0 1 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr c Impedance-Frequency Characteristics BLM18GG471SN1 2000 Impedance () 1500 1000 Z R 500 X 1 10 100 Frequency (MHz) 1000 3000 Microwave Absorber 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 98 Chip Ferrite Bead !Caution/Notice !Caution o Soldering and Mounting s 3ELF HEATING Please pay special attention when mounting chip ferrite beads BLM_AX/P/K/S series bead inductor BLE series in close proximity to other products that radiate heat. The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component. Chip Ferrite Bead Chip Ferrite Bead !Caution/Notice o Rating 1. About the Rated Current Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. 2. About the Excessive Surge Current Excessive surge current ( pulse current or rush current) than specified rated current applied to the product may cause a critical failure, such as an open circuit, burnout caused by excessive temperature rise.Please contact us in advance in case of applying the surge current. o Handling <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period BLM15E/15H/15G series should be used within 12 months, the other series should be used within 6 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions 3TORAGE TEMPERATURE TO # Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Resin Coating Using resin for coating/molding products may affect the products performance. So please pay careful attention in selecting resin. Prior to use, please make the reliability evaluation with the product mounted in your application set. 2. Handling of a Substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. Bending Chip Common Mode Choke Coil o Storage and Operating Conditions Chip EMIFILr Notice Twisting o Notice (Soldering and Mounting) Microwave Absorber Block Type EMIFILr 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a COMMERCIAL PURPOSE EQUIPMENT DESIGN !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 99 BL p Soldering and Mounting Chip Ferrite Bead 1. Standard Land Pattern Dimensions ,AND 0ATTERN 3OLDER 2ESIST o2EFLOW AND &LOW ",- 3ERIES A b Type Soldering BLM02 2EFLOW BLM03 2EFLOW BLM15 2EFLOW b a &LOW BLM18 EXCEPT ' c &LOW 2EFLOW Type BLE32PN Rated Current Soldering (A) &LOW 2EFLOW a b c Land Pad Thickness and Dimension d 18m 35m 70m 4EMPERATURE # OR LESS 4EMPERATURE # OR LESS 2EFLOW s %XCEPT FOR ",-0'q08q%"!8q0$q0'q08 0'q+'q3'0' !ND ",-' IS SPECIALLY ADAPTED FOR REFLOW SOLDERING Chip Common Mode Choke Coil D PATTERN C A b BLM21 IN MM ",%0.q",-pp!80+3% C BLE32 BLM02 BLM03 BLM15 BLM18 BLM21 BLM31 BLM41 Chip EMIFILr Chip Ferrite Bead Soldering and Mounting Chip Ferrite Bead ,AND 0ATTERN 3OLDER 2ESIST BLM03AX MAX BLM03Pp 2EFLOW BLM03EB MAX BLM15AX MAX BLM15PD MAX 2EFLOW BLM15PG BLM15PX MAX BLM18PG BLM18KG BLM18SG BLM21PG &LOW 2EFLOW &LOW 2EFLOW Block Type EMIFILr BLM41PG BLM31PG s !BOUT LAND PAD THICKNESS OF ",%0. PLEASE NOTE THE UPPER LIMIT OF THE TEMPERATURE s $O NOT APPLY NARROWER PATTERN THAN LISTED ABOVE TO ",-pp!80+3 .ARROW PATTERN CAN CAUSE EXCESSIVE HEAT OR OPEN CIRCUIT BLA2A BLA31 o2EFLOW 3OLDERING ",!! o2EFLOW AND &LOW ",! 0ITCH Microwave Absorber 0ITCH s )F THERE ARE HIGH AMOUNTS OF SELF HEATING ON PATTERN THE CONTACT POINTS OF 0#" AND PART MAY BECOME DAMAGED !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 100 BLp Chip Ferrite Bead o PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Soldering and Mounting Products should be located in the sideways direction (Length: a<b) to the mechanical stress. b Poor example Good example 2. Solder Paste Printing and Adhesive Application When flow soldering the chip ferrite beads and bead inductor apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. When reflow soldering the chip ferrite beads and bead inductor the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. Chip EMIFILr Chip Ferrite Bead Soldering and Mounting Chip Ferrite Bead a (in mm) Adhesive Application oEnsure that solder is applied smoothly to a minimum height of 0.2mm to 0.3mm at the end surface of the part. oGuideline of solder paste thickness: 50-80m: BLM02 100-150m: BLM03 100-200m: BLM15/18/21/31/41/BLE32 Chip Solid Inductor BLA c b Bonding agent Land PCB BLA31 Series Coating amount is illustrated in the following diagram. BLA2A 0.4 a: 20-70m b: 30-35m c: 50-105m a oGuideline of solder paste thickness: 100-150m: BLA2A 150-200m: BLA31 BLA31 Chip Common Mode Choke Coil BLM18/21/31/41 Series (Except for BLM18G Series) Coating amount is illustrated in the following diagram. 0.2-0.3mm min. BLM BLE Solder Paste Printing Chip Solid Inductor a: 20-70m b: 30-35m c: 50-105m Block Type EMIFILr Series 1.75 0.7 0.25 c 1.5 0.8 0.5 0.5 0.5 0.7 a PCB Bonding Agent Land b 0.25 Microwave Absorber 0.8 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 101 BLp Chip Ferrite Bead Soldering and Mounting Chip Ferrite Bead Soldering and Mounting Chip Ferrite Bead 3. Standard Soldering Conditions Flux: o Use Rosin-based flux. In case of using RA type solder, products should be cleaned completely with no residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. (1) Soldering Methods Use flow and reflow soldering methods only. Use standard soldering conditions when soldering chip ferrite beads and bead inductor. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. If using BLA series with Sn-Zn based solder, please contact Murata in advance. For additional mounting methods, please contact Murata. oFlow Soldering Profile ( Sn-3.0Ag-0.5Cu Solder) T3 T2 t2 Heating T1 Time (s) Standard Profile Pre-heating Series Limit Profile Standard Profile Pre-heating t1 Heating BLM (Except for BLM02/03/15/18G) BLE BLA31 Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) 150C 60s min. 250C 4 to 6s Limit Profile Cycle of Flow Heating Temp. (T3) Time. (t2) 2653C 5s max. 2 times max. Cycle of Flow 2 times max. oReflow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) T4 Temperature (C) Block Type EMIFILr Chip Common Mode Choke Coil Temperature (C) Chip EMIFILr (2) Soldering Profile T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile t2 90s30s Time (s) Microwave Absorber Standard Profile Series Temp. (T1) BLM BLE BLA Limit Profile Peak Cycle Temperature of Reflow (T2) Time. (t1) Heating 220C min. 30 to 60s 2453C 2 times max. Temp. (T3) Peak Cycle Temperature of Reflow (T4) Time. (t2) 230C min. 60s max. Heating !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 102 260C/10s 2 times max. Temperature of soldering iron tip / Soldering time / Times: 350C max. / 3-4s / 2 times Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. 4. Cleaning (a) Alcohol cleaning agent Isopropyl alcohol (IPA) (b) Aqueous cleaning agent Pine Alpha ST-100S (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agent has been removed with deionized water. (5) BLM_G type is processed with resin. On rinsing the product, using water for ultrasonic cleaning may affect the resin quality used for the product by water element. In case of set cleaning conditions, please make sure the reliability according to the cleaning conditions. Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Following conditions should be observed when cleaning chip ferrite beads. (1) Cleaning Temperature: 60C max. (40C max. for alcohol type cleaner) (2) Ultrasonic Output: 20W/liter max. Duration: 5 minutes max. Frequency: 28 to 40kHz (3) Cleaning Agent The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production. Chip Ferrite Bead Soldering and Mounting Chip Ferrite Bead (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron.(Except for BLM02 Series) Pre-heating: 150C 60s min. Soldering iron power output / Tip diameter: 80W max. / o3mm max. Soldering and Mounting Chip EMIFILr BLp Chip Ferrite Bead !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 103 BL p Packaging Chip Ferrite Bead Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape <Paper> 1.750.1 <Embossed> c BLM02/03 d 3 3.50.05 8.00.3 a ChipPackaging Ferrite Bead Chip Ferrite Bead 2 2.00.05 1 4.00.1 4.00.1 o1.5 +0.1 -0 c Direction of Feed b c c: Depth of Cavity (Embossed Tape) There are holes in the cavities of the BLM21BD222SN1/BD272SN1 and BLM31 only. o1.0 +0.3 -0. BLE32 only. o1.0 +0.2 -0. c: Total Thickness of Tape (Paper Tape) 1 BLM02/03/15: 2.00.05 BLM18S/18T/BLA2A: 2.00.1 2 BLA2A/31: 2.00.1 3 BLA2A/31: 3.50.1 Chip EMIFILr Dimension of the cavity of embossed tape is measured at the bottom side. o180mm Reel o330mm Reel Paper Tape Embossed Tape Paper Tape Embossed Tape Bulk a b c d BLM02 0.45 0.25 0.40 max. - 20000 - - - 1000 BLM03 0.70 0.40 0.55 max. - 15000 - 50000 - 1000 BLM15 1.15 0.65 0.8 max. - 10000 - 50000 - 1000 BLM18A/B/P/R/H/G 1.85 1.05 1.1 max. - 4000 - 10000 - 1000 - 4000 - 10000 - 1000 BLM18EG/KG_TN Chip Common Mode Choke Coil Minimum Qty. (pcs.) Dimensions Part Number 0.85 max. 1.85 1.05 BLM18S 1.85 1.05 0.90 max. - 10000 - 30000 - 1000 BLM18T 1.85 1.05 0.90 max. - 10000 - - - 1000 BLM21 2.25 1.45 1.1 max. - 4000 - 10000 - 1000 BLM31 3.5 1.9 1.3 0.2 - 3000 - 10000 1000 BLM21BD222SN1/272SN1 2.25 1.45 1.3 0.2 - 3000 - 10000 1000 BLE32 3.2 2.8 2.3 0.25 - 1500 - 7000 1000 BLA2A 2.2 1.2 0.8 max. - 10000 - 50000 - 1000 BLA31 3.4 1.8 1.1 max. - 4000 - 10000 - 1000 BLM18EG/KG_SN 1.1 max. Microwave Absorber b +0.3 o1.5 -0 +0.1 c 0.30.1 5.50.05 o1.5 -0 12.00.3 2.00.05 4.00.1 4.00.1 1.750.1 Minimum Quantity and Dimensions of 12mm Width Embossed Tape a Block Type EMIFILr (in mm) Part Number BLM41 Dimensions a b c 4.8 1.9 1.75 Minimum Qty. (pcs.) o180mm Reel o330mm Reel 2500 Bulk 1000 Direction of Feed c: Depth of Cavity Dimension of the cavity is measured at the bottom side. "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity." !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 104 8000 (in mm) Chip Ferrite Bead Design Kits oEKEMBL03AL-KIT (Chip Ferrite Beads) Part Number Quantity (pcs.) Impedance typ. (at 100MHz, 20 degrees C) Rated Current (mA) DC Resistance () max. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 BLM02AX100SN1 BLM02AX700SN1 BLM02AX121SN1 BLM03AG100SN1 BLM03AG700SN1 BLM03AG800SN1 BLM03AG121SN1 BLM03AG241SN1 BLM03AG601SN1 BLM03AG102SN1 BLM03AX100SN1 BLM03AX800SN1 BLM03AX121SN1 BLM03AX241SN1 BLM03AX601SN1 BLM03AX102SN1 BLM03BB100SN1 BLM03BB220SN1 BLM03BB470SN1 BLM03BB750SN1 BLM03BB121SN1 BLM03BD750SN1 BLM03BD121SN1 BLM03BD241SN1 BLM03BD471SN1 BLM03BD601SN1 BLM03BC330SN1 BLM03BC560SN1 BLM03BC800SN1 BLM03EB250SN1 BLM03EB500SN1 BLM03HG601SN1 BLM03HG102SN1 BLM03HB191SN1 BLM03HD331SN1 BLM03HD471SN1 BLM03HD601SN1 BLM03HD102SN1 BLM03PG220SN1 BLM03PG330SN1 BLM03PX220SN1 BLM03PX330SN1 BLM03PX800SN1 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 105 7025% 12025% 10 (Typ.) 70 (Typ.) 8025% 12025% 24025% 60025% 100025% 10 (Typ.) 8025% 12025% 24025% 60025% 100025% 1025% 2225% 4725% 7525% 12025% 7525% 12025% 24025% 47025% 60025% 3325% 5625% 8025% 750 300 250 500 200 200 200 200 100 100 1000 500 450 350 250 200 300 200 200 200 100 300 250 200 215 200 150 100 100 2525% 5025% 60025% 100025% 19025% 33025% 47025% 60025% 100025% 2225% 3325% 2225% 3325% 8025% 600 400 150 125 150 200 175 150 120 900 750 1800 1500 1000 0.07 0.4 0.5 0.1 0.4 0.4 0.5 0.8 1.5 2.5 0.05 0.18 0.23 0.38 0.85 1.25 0.4 0.5 0.7 1.0 1.5 0.4 0.5 0.8 1.5 1.7 0.85 1.05 1.40 0.26 0.58 1.6 2.6 2.0 1.0 1.3 1.7 2.9 0.065 0.090 0.040 0.055 0.130 Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr No. Chip Ferrite Bead Design Chip FerriteKits Bead BL p No. Part Number Quantity (pcs.) Impedance typ. (at 100MHz, 20 degrees C) Rated Current (mA) DC Resistance () max. 1 2 3 4 5 6 7 8 BLM15AG100SN1 BLM15AG700SN1 BLM15AG121SN1 BLM15AG221SN1 BLM15AG601SN1 BLM15AG102SN1 BLM15AX100SN1 BLM15AX300SN1 20 20 20 20 20 20 20 20 10 (Typ.) 70 (Typ.) 12025% 22025% 60025% 100025% 105 3025% 1000 600 550 450 300 300 1740 1100 0.025 0.15 0.19 0.29 0.52 0.65 0.015 0.06 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 105 Microwave Absorber oEKEMBL15AR-KIT (Chip Ferrite Beads) BLp Chip Ferrite Bead Design Kits Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Chip FerriteKits Bead Design Chip Ferrite Bead Continued from the preceding page. No. Part Number Quantity (pcs.) Impedance typ. (at 100MHz, 20 degrees C) Rated Current (mA) DC Resistance () max. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 BLM15AX700SN1 BLM15AX121SN1 BLM15AX221SN1 BLM15AX601SN1 BLM15AX102SN1 BLM15BA050SN1 BLM15BA100SN1 BLM15BA220SN1 BLM15BA330SN1 BLM15BA470SN1 BLM15BA750SN1 BLM15BB050SN1 BLM15BB100SN1 BLM15BB220SN1 BLM15BB470SN1 BLM15BB750SN1 BLM15BB121SN1 BLM15BB221SN1 BLM15BC121SN1 BLM15BC241SN1 BLM15BD750SN1 BLM15BD121SN1 BLM15BD221SN1 BLM15BD471SN1 BLM15BD601SN1 BLM15BD102SN1 BLM15BD182SN1 BLM15BX750SN1 BLM15BX121SN1 BLM15BX221SN1 BLM15BX471SN1 BLM15BX601SN1 BLM15BX102SN1 BLM15BX182SN1 BLM15HD601SN1 BLM15HD102SN1 BLM15HD182SN1 BLM15HG601SN1 BLM15HG102SN1 BLM15HB121SN1 BLM15HB221SN1 BLM15EG121SN1 BLM15EG221SN1 BLM15GG221SN1 BLM15GG471SN1 BLM15GA750SN1 BLM15PG100SN1 BLM15PD300SN1 BLM15PD600SN1 BLM15PD800SN1 BLM15PD121SN1 BLM15PX330SN1 BLM15PX600SN1 BLM15PX800SN1 BLM15PX121SN1 BLM15PX181SN1 BLM15PX221SN1 BLM15PX331SN1 BLM15PX471SN1 BLM15PX601SN1 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 7025% 12025% 22025% 60025% 100025% 525% 1025% 2225% 3325% 4725% 7525% 525% 1025% 2225% 4725% 7525% 12025% 22025% 12025% 24025% 7525% 12025% 22025% 47025% 60025% 100025% 180025% 7525% 12025% 22025% 47025% 60025% 100025% 180025% 60025% 100025% 180025% 60025% 100025% 12025% 22025% 12025% 22025% 22025% 47025% 7525% 10 (Typ.) 3025% 6025% 8025% 12025% 3325% 6025% 8025% 12025% 18025% 22025% 33025% 47025% 60025% 780 700 600 500 350 300 300 300 300 200 200 500 300 300 0.10 0.13 0.18 0.34 0.49 0.10 0.20 0.30 0.40 0.60 0.80 0.08 0.10 0.20 300 300 300 200 350 250 300 300 300 200 200 200 100 600 600 450 350 350 300 250 300 250 200 300 250 300 250 1500 700 300 200 200 1000 2200 1700 1500 1300 3000 2500 2300 2000 1500 1400 1200 1000 900 0.35 0.40 0.55 0.80 0.45 0.70 0.20 0.30 0.40 0.60 0.65 0.90 1.40 0.15 0.17 0.27 0.41 0.46 0.65 0.90 0.85 1.25 2.20 0.70 1.10 0.70 1.00 0.095 0.28 0.70 1.30 1.30 0.025 0.035 0.06 0.07 0.09 0.022 0.032 0.038 0.055 0.090 0.10 0.15 0.20 0.23 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 106 BLp Chip Ferrite Bead Design Kits 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 BLM18BB221SN1 BLM18BB331SN1 BLM18BB471SN1 BLM18BD470SN1 BLM18BD121SN1 BLM18BD151SN1 BLM18BD221SN1 BLM18BD331SN1 BLM18BD421SN1 BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1 BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1 BLM18BD252SN1 BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1 BLM18PG121SN1 BLM18PG181SN1 BLM18PG221SN1 BLM18PG331SN1 BLM18PG471SN1 BLM18KG260TN1 BLM18KG300TN1 BLM18KG700TN1 BLM18KG101TN1 BLM18KG121TN1 BLM18KG221SN1 BLM18KG331SN1 BLM18KG471SN1 BLM18KG601SN1 BLM18SG260TN1 BLM18SG700TN1 BLM18SG121TN1 BLM18SG221TN1 BLM18SG331TN1 Rated Current (mA) 500 500 500 500 500 500 400 500 500 300 300 200 700 700 600 550 550 500 500 450 DC Resistance () max. 0.18 0.25 0.25 0.30 0.35 0.38 0.50 0.20 0.25 0.55 0.70 0.90 0.05 0.10 0.20 0.25 0.25 0.30 0.30 0.37 450 400 300 500 200 200 200 200 200 200 200 100 50 50 50 50 1000 3000 500 2000 1500 1400 1200 1000 6000 5000 3500 3000 3000 2200 1700 1500 1300 6000 4000 3000 2500 1500 0.45 0.58 0.85 0.30 0.40 0.40 0.45 0.50 0.55 0.55 0.65 0.85 1.20 1.50 1.50 1.50 0.05 0.025 0.10 0.05 0.09 0.10 0.15 0.20 0.007 0.010 0.022 0.030 0.030 0.050 0.080 0.130 0.150 0.007 0.020 0.025 0.040 0.070 oEKEMBL8GAB-KIT (Chip Ferrite Beads / for High Frequency Type) No. Part Number Quantity (pcs.) 1 2 3 BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1 20 20 20 Impedance Impedance Rated Current DC Resistance (at 100MHz, 20 degrees C) (at 1GHz, 20 degrees C) (mA) () max. 47025% 60025% 100025% 600 (Typ.) 700 (Typ.) 1000 (Typ.) 200 200 100 0.85 1.00 1.60 Continued on the following page. !Note Chip EMIFILr BLM18AG121SN1 BLM18AG151SN1 BLM18AG221SN1 BLM18AG331SN1 BLM18AG471SN1 BLM18AG601SN1 BLM18AG102SN1 BLM18BA050SN1 BLM18BA100SN1 BLM18BA470SN1 BLM18BA750SN1 BLM18BA121SN1 BLM18BB050SN1 BLM18BB100SN1 BLM18BB220SN1 BLM18BB470SN1 BLM18BB600SN1 BLM18BB750SN1 BLM18BB121SN1 BLM18BB151SN1 Impedance typ. (at 100MHz, 20 degrees C) 12025% 15025% 22025% 33025% 47025% 60025% 100025% 525% 1025% 4725% 7525% 12025% 525% 1025% 2225% 4725% 6025% 7525% 12025% 15025% 22025% 33025% 47025% 4725% 12025% 15025% 22025% 33025% 42025% 47025% 60025% 100025% 150025% 180025% 220025% 250025% 30 (Typ.) 3325% 60 (Typ.) 12025% 18025% 22025% 33025% 47025% 2625% 3025% 7025% 10025% 12025% 22025% 33025% 47025% 60025% 2625% 7025% 12025% 22025% 33025% Chip Common Mode Choke Coil 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Block Type EMIFILr Part Number * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 107 Microwave Absorber No. Chip Ferrite Bead Design Chip FerriteKits Bead oEKEMBL18AJ-KIT (Chip Ferrite Beads) BLp Chip Ferrite Bead Design Kits Chip EMIFILr Chip FerriteKits Bead Design Chip Ferrite Bead Continued from the preceding page. No. Part Number Quantity (pcs.) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1 BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1 BLM18HE601SN1 BLM18HE102SN1 BLM18HE152SN1 BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1 BLM18HK102SN1 BLM18EG101TN1 BLM18EG121SN1 BLM18EG221TN1 BLM18EG221SN1 BLM18EG331TN1 BLM18EG391TN1 BLM18EG471SN1 BLM18EG601SN1 BLM18GG471SN1 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Impedance Impedance Rated Current DC Resistance (at 100MHz, 20 degrees C) (at 1GHz, 20 degrees C) (mA) () max. 12025% 22025% 33025% 47025% 60025% 100025% 60025% 100025% 150025% 33025% 47025% 60025% 100025% 10025% 12025% 22025% 22025% 33025% 39025% 47025% 60025% 47025% 200 100 50 100 100 50 800 600 500 200 200 100 50 2000 2000 1000 2000 500 500 500 500 200 50040% 110040% 160040% 1000 (Typ.) 1200 (Typ.) 1700 (Typ.) 600 (Typ.) 1000 (Typ.) 1500 (Typ.) 400 (Typ.) 600 (Typ.) 700 (Typ.) 1200 (Typ.) 140 (Typ.) 145 (Typ.) 300 (Typ.) 260 (Typ.) 450 (Typ.) 520 (Typ.) 550 (Typ.) 700 ( Typ.) 180030% 0.50 0.80 1.20 1.20 1.50 1.80 0.25 0.35 0.50 0.50 0.70 0.90 1.50 0.045 0.04 0.15 0.05 0.21 0.30 0.21 0.35 1.30 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil oEKEMBL21AF-KIT (Chip Ferrite Beads / for Large-current P Type) No. Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1 BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1 BLM21AG102SN1 BLM21BB050SN1 BLM21BB600SN1 BLM21BB750SN1 BLM21BB121SN1 BLM21BB221SN1 BLM21BB331SN1 BLM21BB471SN1 BLM21BD121SN1 BLM21BD221SN1 BLM21BD421SN1 BLM21BD471SN1 BLM21BD601SN1 BLM21BD102SN1 BLM21BD152SN1 BLM21BD182SN1 BLM21BD222SN1 BLM21BD222TN1 BLM21BD272SN1 BLM21PG220SN1 BLM21PG300SN1 BLM21PG600SN1 BLM21PG121SN1 BLM21PG221SN1 BLM21PG331SN1 BLM31PG330SN1 BLM31PG500SN1 BLM31PG121SN1 BLM31PG391SN1 BLM31PG601SN1 BLM41PG600SN1 BLM41PG750SN1 BLM41PG181SN1 Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Impedance typ. (at 100MHz, 20 degrees C) Rated Current (mA) DC Resistance () max. 12025% 15025% 22025% 33025% 47025% 60025% 100025% 525% 6025% 7525% 12025% 22025% 33025% 47025% 12025% 22025% 42025% 47025% 60025% 100025% 150025% 180025% 2250 (Typ.) 220025% 270025% 2225% 30 (Typ.) 6025% 12025% 22025% 33025% 3325% 50 (Typ.) 12025% 39025% 60025% 60 (Typ.) 75 (Typ.) 18025% 800 800 800 700 700 600 500 1000 800 700 600 500 400 400 200 200 200 200 200 200 200 200 200 200 200 6000 4000 3500 3000 2000 1500 6000 3500 3500 2000 1500 6000 3500 3500 0.10 0.10 0.13 0.16 0.19 0.21 0.28 0.02 0.13 0.16 0.19 0.26 0.33 0.40 0.25 0.25 0.30 0.35 0.35 0.40 0.45 0.50 0.60 0.60 0.80 0.009 0.014 0.02 0.03 0.045 0.07 0.009 0.015 0.02 0.05 0.08 0.009 0.015 0.02 Continued on the following page. !Note 108 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BLp Chip Ferrite Bead Design Kits Continued from the preceding page. Part Number 40 41 BLM41PG471SN1 BLM41PG102SN1 Quantity (pcs.) 20 20 Impedance typ. (at 100MHz, 20 degrees C) Rated Current (mA) DC Resistance () max. 47025% 100025% 2000 1500 0.05 0.09 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Chip Ferrite Bead Design Chip FerriteKits Bead No. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 109 Memo !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 110 Chip Ferrite Bead NF p 112 Part Numbering 114 Series Line Up 117 Product Detail 121 !Caution/Notice 154 Soldering and Mounting 156 Packaging 163 Design Kits 165 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Series Introduction Chip EMIFILr Chip EMIFILr !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. NFp Series Introduction Chip Ferrite Bead Example of 3-Terminal Capacitor Structure Ground Terminal Output (Input) Terminal Chip 3-terminal capacitor is a chip-shaped 3-terminal capacitor designed for noise suppression. Its inner structure, like a feed-through capacitor, makes its ground impedance quite low. Owing to this structure, the 3-terminal capacitor has a good noise suppression effect at a high frequency range up to several hundred MHz. Ground Terminal Input (Output) Terminal Ground Terminal Chip EMIFILr Inner Feed Through Electrode Cross Section Series Equivalent Circuit Part Number Chip Common Mode Choke Coil NFM18CC NFM21CC NFM Series (3-terminal capacitor) NFM18PC NFM18PS NFM21PC NFL15ST NFL18ST NFL18SP NFL / NFW Series Block Type EMIFILr (LC filter) NFL21SP NFW31SP NFA21SL NFA18SL NFA18SD NFR Series Microwave Absorber (RC filter) NFE Series Feed through capacitor with ferrite cores !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 112 NFR21GD NFA31GD NFE31PT NFE61PT NFp Series Introduction 0 Chip Ferrite Bead 10 Insertion Loss (dB) 20 Multilayer Capacitor 1608mm Size 1F 30 40 50 60 3-Terminal Capacitor 1608mm Size 1F NFM18PS105 70 80 90 0.1 1 10 100 1000 Insertion Loss Sample Features Classification Applications Chip EMIFILr Frequency (MHz) Example NFM_CC Standard type with varied capacitance Noise suppression in low speed signal lines * Low speed interface lines * Sensor NFM_PC Meet large current, high capacitance available, for power lines Noise suppression in power lines * Individual IC power lines NFL_ST T-type filter, effective in low impedance circuits NFL_SP -type filter, effective in high impedance circuits -type filter, designed for low impedance circuits NFA_SL 4-line array, suitable for bus lines or flat cables Limit noise using resistor, also loop back to ground Noise suppression in signal line with unstable ground * Interface lines * Clock lines Meets large current, good high frequency performance because of its feed through structure Noise suppression in power lines / low impedance lines * Various power lines * Sensor Block Type EMIFILr NFW_SP Noise suppression in high speed signal lines * High speed interface lines * Bus lines LCD lines Camera I/Fs * High speed analog lines RGB / D terminal Microwave Absorber Sharp insertion loss curve enables low damage to signal waveform Chip Common Mode Choke Coil Standard of 3terminal capacitor !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 113 NFp Part Numbering Chip EMIFILr Capacitor Chip Ferrite Bead (Part Number) NF M 3D CC 102 R 1H 3 L q w e r t y u i o qProduct ID *NFAppSL/SD Series, please refer to p.116 (LC Combined (2)). *NFAppGD Series, please refer to p.116 (RC Combined). yCharacteristics Product ID NF Chip EMIFILr wStructure Code Capacitance Temperature Characteristics B 10%, 12.5%, +10/-13% C 22% D +22/-33% Structure F +30/-80%, +30/-84% M Capacitor Type R 15%, +15/-18% A Capacitor Array Type U -750 120ppm/C S +350 to -1000ppm/C Code Chip Common Mode Choke Coil Chip EMIFILr eDimensions (LgW) Code Dimensions (LgW) EIA uRated Voltage 15 1.0g0.5mm 0402 Code Rated Voltage 18 1.6g0.8mm 0603 0E 2.5V 21 2.0g1.25mm 0805 0G 4V 3D 3.2g1.25mm 1205 0J 6.3V 31 3.2g1.6mm 1206 1A 10V 41 4.5g1.6mm 1806 1C 16V 1E 25V 1H 50V 2A 100V rFeatures Code Features CC Capacitor Type for Signal Lines iElectrode/Others (NFM Series) PC Capacitor Type for Large Current PS High Insertion Loss Type for Large Current Code Electrode Series KC Capacitor Type for Very Large Current 3 Sn Plating NFM tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. iNumber of Circuits (NFAppCC Series) Code Number of Circuits 4 4 Circuits Code Packaging L Embossed Taping (o180mm Reel) B Bulk D Paper Taping (o180mm Reel) Series NFM3D/NFM31/NFM41 All series NFM15/NFM18/NFM21/NFAppCC Microwave Absorber Block Type EMIFILr oPackaging !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 114 NFp Chip EMIFILr Part Numbering LC Combined (1) L 18 ST q w e r X 1C 107 3 L y u i o t qProduct ID yCharacteristics (NFL/NFW Series) Product ID Chip EMIFILr wStructure Code Characteristics H/X Cut-off Frequency yCharacteristics (NFE Series) Code Structure Code W Wire Wound, LC Combined Type B 10% L Multilayer, LC Combined Type C 20%, 22% E Block, LC Combined Type D +20/-30%, +22/-33% E +20/-55%, +22/-56% F +30/-80%, +22/-82% eDimensions (LgW) Capacitance Temperature Characteristics Code Dimensions (LgW) EIA R 15% 15 1.0g0.5mm 0402 U -750 120ppm/ C 18 1.6g0.8mm 0603 Z Other 21 2.0g1.25mm 0805 31 3.2g1.6mm 1206 61 6.8g1.6mm 2706 uRated Voltage Code Rated Voltage 1A 10V 1C 16V Features 1E 25V SP Circuit for Signal Lines 1H 50V ST T Circuit for Signal Lines 2A 100V PT T Circuit for Large Current rFeatures Code Chip EMIFILr NF Chip Ferrite Bead NF Chip Common Mode Choke Coil (Part Number) iElectrode tCut-off Frequency (NFL/NFW Series) Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Code Electrode Series 3/7 Sn Plating NFL 4 Lead Free Solder Coating NFW 9 Others NFE Block Type EMIFILr tCapacitance (NFE Series) Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. oPackaging Code Packaging K Embossed Taping (o330mm Reel) NFW31/NFE NFW31/NFE Embossed Taping (o180mm Reel) Bulk D Paper Taping (o180mm Reel) NFL18/NFL21/NFE NFL15/NFL18/NFL21 Microwave Absorber L B Series !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 115 NFp Chip EMIFILr Part Numbering LC Combined (2) Chip Ferrite Bead (Part Number) NF A 21 SL 207 X 1A 4 5 L q w e r t y u i o !0 qProduct ID *NFAppCC Series, please refer to p.114. *NFAppGD Series, please refer to p.116 (RC Combined). yFeatures (2) Product ID Code NF Chip EMIFILr Chip EMIFILr Expressed by a letter V wStructure Code Structure A Array Type uRated Voltage eDimensions (LgW) Chip Common Mode Choke Coil Features X Code Rated Voltage 1A 10V iNumber of Circuits Code Dimensions (LgW) EIA 18 1.6g0.8mm 0603 Code Number of Circuits 21 2.0g1.25mm 0805 4 4 Circuits rFeatures (1) oDimensions (T) Code Features Code Dimensions (T) SL L Circuit for Signal Lines 5 Low Profile SD L Circuit for Differential Signal 8 Standard tCut-off Frequency Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. !0Packaging Code Packaging B Bulk L Embossed Taping (o180mm Reel) RC Combined (Part Number) NF R 21 GD 470 q w e r 2 470 t y L u i qProduct ID tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Product ID NF Chip EMIFILr wStructure Block Type EMIFILr *NFAppCC Series, please refer to p.114. *NFAppSL/SD Series, please refer to p.116 (LC Combined (2)). Code Structure R RC Combined Type A RC Combined Array Type yResistance Expressed by three-digit alphanumerics. The unit is in ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. eDimensions (LgW) Dimensions (LgW) EIA 21 2.0g1.25mm 0805 Code Electrode 31 3.2g1.6mm 1206 2 Sn Plating rFeatures Microwave Absorber uElectrode/Others (NFR Series) Code uNumber of Circuits (NFAppGD Series) Code Features Code Number of Circuits GD RC Combined Type for Signal Lines 4 4 Circuits iPackaging Code Packaging L Embossed Taping (o180mm Reel) B Bulk D Paper Taping (o180mm Reel) Series NFR All Series NFAppGD !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 116 p135 0603 (1608) p136 0805 (2012) Capacitor Type for Signal Lines p137 1205 (3212) p138 1806 (4516) p139 Capacitor Array Type for Signal Lines 1206 (3216) 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFM15CC222D1A3 NFM15CC222D1C3 NFM15CC223C1A3 NFM15CC223C1C3 NFM18CC220U1C3 NFM18CC470U1C3 NFM18CC101R1C3 NFM18CC221R1C3 NFM18CC471R1C3 NFM18CC102R1C3 NFM18CC222R1C3 NFM18CC223R1C3 NFM21CC220U1H3 NFM21CC470U1H3 NFM21CC101U1H3 NFM21CC221R1H3 NFM21CC471R1H3 NFM21CC102R1H3 NFM21CC222R1H3 NFM21CC223R1H3 NFM3DCC220U1H3 NFM3DCC470U1H3 NFM3DCC101U1H3 NFM3DCC221R1H3 NFM3DCC471R1H3 NFM3DCC102R1H3 NFM3DCC222R1H3 NFM3DCC223R1H3 NFM41CC220U2A3 NFM41CC470U2A3 NFM41CC101U2A3 NFM41CC221U2A3 NFM41CC471R2A3 NFM41CC102R2A3 NFM41CC222R2A3 NFM41CC223R2A3 NFA31CC220S1E4 NFA31CC470S1E4 NFA31CC101S1E4 NFA31CC221S1E4 NFA31CC471R1E4 NFA31CC102R1E4 NFA31CC222R1E4 NFA31CC223R1C4 10Vdc 16Vdc 10Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 16Vdc 2200pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 22000pF+20%-20% 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 22pF+50%-20% 47pF+50%-20% 100pF+50%-20% 220pF+50%-20% 470pF+50%-20% 1000pF+50%-20% 2200pF+50%-20% 22000pF+50%-20% 22pF+50%-20% 47pF+50%-20% 100pF+50%-20% 220pF+50%-20% 470pF+50%-20% 1000pF+50%-20% 2200pF+50%-20% 22000pF+50%-20% 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% - 1A 1A 1A 1A 400mA 400mA 500mA 500mA 500mA 600mA 700mA 1000mA 700mA 700mA 700mA 700mA 1000mA 1000mA 1000mA 2000mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA Chip Ferrite Bead p134 0402 (1005) Part Number Chip EMIFILr Size Code Thickness in nch (in mm) (mm) Series Line Up Chip Common Mode Choke Coil Type Chip EMIFILr Microwave Absorber Continued on the following page. Block Type EMIFILr NFp !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 117 NFp Chip EMIFILr Series Line Up Type Size Code Thickness in nch (in mm) (mm) p123 Chip Ferrite Bead 0402 (1005) p125 p126 Chip EMIFILr 0603 (1608) Capacitor Type for Power Lines p128 p129 0805 (2012) Chip Common Mode Choke Coil 1205 p130 (3212) p131 p132 1206 (3216) p133 1806 (4516) Block Type EMIFILr p121 1206 (3216) LC Combined Type for Power Lines and Signal Lines p122 Microwave Absorber 2706 (6816) 0.4 0.4 0.4 0.4 0.4 0.4 0.3 0.3 0.3 0.4 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.7 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.0 1.0 1.0 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Part Number Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFM15PC473C1A3 NFM15PC473C1C3 NFM15PC104D0J3 NFM15PC104R1A3 NFM15PC224D0J3 NFM15PC224R1A3 NFM15PC474D0G3 NFM15PC474R0J3 NFM15PC105R0G3 NFM15PC435R0E3 NFM18PS474R0J3 NFM18PS105D0J3 NFM18PS105R0J3 NFM18PC104R1C3 NFM18PC224R0J3 NFM18PC474R0J3 NFM18PC105R0J3 NFM18PC225B0J3 NFM18PC225B1A3 NFM21PS106B0J3 NFM21PC104R1E3 NFM21PC224R1C3 NFM21PC474R1C3 NFM21PC105B1A3 NFM21PC105B1C3 NFM21PC225B0J3 NFM21PC475B1A3 NFM3DPC223R1H3 NFM31PC276B0J3 NFM31KC103R1H3 NFM31KC103R2A3 NFM31KC153R1H3 NFM31KC153R2A3 NFM31KC223R1H3 NFM31KC223R2A3 NFM31KC104R1H3 NFM31KC104R2A3 NFM41PC204F1H3 NFM41PC155B1E3 NFM41PC155B1H3 NFE31PT220R1E9 NFE31PT470C1E9 NFE31PT101C1E9 NFE31PT221D1E9 NFE31PT471F1E9 NFE31PT152Z1E9 NFE31PT222Z1E9 NFE61PT330B1H9 NFE61PT680B1H9 NFE61PT101Z1H9 NFE61PT181B1H9 NFE61PT361B1H9 NFE61PT681B1H9 NFE61PT102E1H9 NFE61PT472C1H9 10Vdc 16Vdc 6.3Vdc 10Vdc 6.3Vdc 10Vdc 4Vdc 6.3Vdc 4Vdc 2.5Vdc 6.3Vdc 6.3Vdc 6.3Vdc 16Vdc 6.3Vdc 6.3Vdc 6.3Vdc 6.3Vdc 10Vdc 6.3Vdc 25Vdc 16Vdc 16Vdc 10Vdc 16Vdc 6.3Vdc 10Vdc 50Vdc 6.3Vdc 50Vdc 100Vdc 50Vdc 100Vdc 50Vdc 100Vdc 50Vdc 100Vdc 50Vdc 25Vdc 50Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 0.047F+20%-20% 0.047F+20%-20% 0.1F+20%-20% 0.1F+20%-20% 0.22F+20%-20% 0.22F+20%-20% 0.47F+20%-20% 0.47F+20%-20% 1F+20%-20% 4.3F+20%-20% 0.47F+20%-20% 1.0F+20%-20% 1.0F+20%-20% 0.1F+20%-20% 0.22F+20%-20% 0.47F+20%-20% 1.0F+20%-20% 2.2F+20%-20% 2.2F+20%-20% 10F+20%-20% 0.1F+20%-20% 0.22F+20%-20% 0.47F+20%-20% 1.0F+20%-20% 1.0F+20%-20% 2.2F+20%-20% 4.7F+20%-20% 0.022F+20%-20% 27F+20%-20% 10000pF+20%-20% 10000pF+20%-20% 15000pF+20%-20% 15000pF+20%-20% 22000pF+20%-20% 22000pF+20%-20% 100000pF+20%-20% 100000pF+20%-20% 0.2F+80%-20% 1.5F+20%-20% 1.5F+20%-20% 22pF+30%-30% 47pF+50%-20% 100pF+80%-20% 220pF+50%-20% 470pF+50%-20% 1500pF+50%-20% 2200pF+50%-50% 33pF+30%-30% 68pF+30%-30% 100pF+30%-30% 180pF+30%-30% 360pF+20%-20% 680pF+30%-30% 1000pF+80%-20% 4700pF+80%-20% - 1A 1A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 4A 2A 4A 4A 2A 2A 2A 4A 4A 4A 6A 2A 6A 10A 10A 10A 10A 10A 10A 6A 6A 2A 6A 6A 6A 6A 6A 6A 6A 6A 6A 2A 2A 2A 2A 2A 2A 2A 2A Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 118 0603 p142 (1608) LC Combined Multilayer Type for Signal Lines p143 p144 0805 (2012) p145 0603 (1608) p146 p147 LC Combined Array Type for Signal Lines p148 0805 (2012)p149 p150 LC Combined Wire Wound Type for Signal Lines 1206 (3216) Capacitance Nominal Cut-off Frequency Rated Current NFL15ST157X0J3 NFL15ST207X0J3 NFL15ST307X0J3 NFL15ST507X0J3 NFL18ST506H1A3 NFL18ST706H1A3 NFL18ST107H1A3 NFL18ST207H1A3 NFL18ST307H1A3 NFL18ST507H1A3 NFL18ST207X1C3 NFL18ST307X1C3 NFL18ST507X1C3 NFL18SP157X1A3 NFL18SP207X1A3 NFL18SP307X1A3 NFL18SP507X1A3 NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 NFA18SL137V1A45 NFA18SL187V1A45 NFA18SL207V1A45 NFA18SL227V1A45 NFA18SL307V1A45 NFA18SL357V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SL506X1A45 NFA18SD187X1A45 NFA18SD207X1A45 NFA21SL287V1A45 NFA21SL317V1A45 NFA21SL337V1A45 NFA21SL287V1A48 NFA21SL317V1A48 NFA21SL337V1A48 NFA21SL207X1A45 NFA21SL307X1A45 NFA21SL506X1A48 NFA21SL806X1A48 NFA21SL207X1A48 NFA21SL307X1A48 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 NFW31SP107X1E4 NFW31SP157X1E4 NFW31SP207X1E4 NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 6.3Vdc 6.3Vdc 6.3Vdc 6.3Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 16Vdc 16Vdc 16Vdc 10Vdc 10Vdc 10Vdc 10Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 22pF (Typ.) 17pF (Typ.) 12pF (Typ.) 7pF (Typ.) 110pF (Typ.) 70pF (Typ.) 50pF (Typ.) 22pF (Typ.) 16pF (Typ.) 10pF (Typ.) 25pF+20%-20% 18pF+20%-20% 10pF+20%-20% 34pF+20%-20% 24pF+20%-20% 19pF+20%-20% 11pF+20%-20% 670pF+20%-20% 240pF+20%-20% 84pF+20%-20% 76pF+20%-20% 44pF+20%-20% 28pF+20%-20% 22pF+20%-20% 19pF+10%-10% 16pF+10%-10% 12pF+10%-10% - 150MHz 200MHz 300MHz 500MHz 50MHz 70MHz 100MHz 200MHz 300MHz 500MHz 200MHz 300MHz 500MHz 150MHz 200MHz 300MHz 500MHz 10MHz 20MHz 50MHz 70MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 130MHz 180MHz 200MHz 220MHz 300MHz 350MHz 400MHz 480MHz 50MHz 180MHz 200MHz 280MHz 310MHz 330MHz 280MHz 310MHz 330MHz 200MHz 300MHz 50MHz 80MHz 200MHz 300MHz 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 50mA 50mA 50mA 50mA 75mA 75mA 75mA 100mA 100mA 100mA 150mA 200mA 200mA 100mA 100mA 100mA 100mA 100mA 100mA 150mA 150mA 200mA 200mA 250mA 300mA 300mA 300mA 50mA 50mA 50mA 25mA 100mA 35mA 100mA 100mA 25mA 25mA 25mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 20mA 20mA 100mA 100mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA Chip EMIFILr p141 0.3 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.85 0.85 0.85 0.5 0.5 0.85 0.85 0.85 0.85 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 Rated Voltage Chip Common Mode Choke Coil p140 0402 (1005) Part Number Block Type EMIFILr Size Code Thickness in nch (in mm) (mm) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 119 Microwave Absorber Type Chip Ferrite Bead NFp Chip EMIFILr Series Line Up NFp Chip EMIFILr Series Line Up Type Size Code Thickness in nch (in mm) (mm) Chip Ferrite Bead p152 RC Combined Type for Signal Lines 0805 (2012) p153 1206 (3216) Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFR21GD1002202 NFR21GD1004702 NFR21GD4702202 NFR21GD4704702 NFR21GD4706802 NFR21GD4701012 NFR21GD1012202 NFR21GD1014702 NFR21GD1016802 NFR21GD1011012 NFA31GD1006R84 NFA31GD1004704 NFA31GD1001014 NFA31GD4706R84 NFA31GD4703304 NFA31GD4704704 NFA31GD4701014 NFA31GD1016R84 NFA31GD1014704 NFA31GD1011014 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 10pF+20%-20% 10pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% 10pF+20%-20% 10pF+20%-20% 10pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% - 50mA 35mA 50mA 35mA 30mA 25mA 50mA 35mA 30mA 25mA 50mA 20mA 15mA 50mA 20mA 20mA 15mA 50mA 20mA 15mA Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr RC Combined Array Type for Signal Lines 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Part Number !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 120 NFE Series Universal Type [Power Lines/Signal Lines] Chip EMIFILr NFE31PT NFE31PT Series 1206/3216 (inch/mm) Meets 6A, T-type filter with built-in ferrite bead. c Equivalent Circuit 0.70.2 (1) (2) (3) Input (Output) (1) 3.20.35 Output (Input) (3) Chip Ferrite Bead 1.00.2 1.60.15 0.70.2 GND (2) No polarity. c Packaging 1.60.15 Code Packaging Minimum Quantity : Electrode L 180mm Reel Embossed Tape 2000 K 330mm Reel Embossed Tape 8000 B Bulk(Bag) 500 (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage NFE31PT220R1E9p 22pF 30% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT470C1E9p 47pF 50/-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT101C1E9p 100pF 80/-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT221D1E9p 220pF 50/-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT471F1E9p 470pF 50/-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT152Z1E9p 1500pF 50/-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT222Z1E9p 2200pF 50% 6A 25Vdc 1000M ohm -40C to +85C Chip Common Mode Choke Coil Insulation Resistance Operating (min.) Temperature Range Part Number Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) NFE31PT220R1E9 NFE31PT470C1E9 10 NFE31PT221D1E9 NFE31PT471F1E9 NFE31PT152Z1E9 30 NFE31PT222Z1E9 40 Block Type EMIFILr Insertion Loss (dB) NFE31PT101C1E9 20 Universal Type [Power Lines/Signal Lines] Chip EMIFILr c Dimensions 50 60 10 100 Frequency (MHz) 1000 2000 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 121 NFE Series Universal Type [Power Lines/Signal Lines] Chip EMIFILr NFE61PT NFE61PT Series 2706/6816 (inch/mm) T-type filter with built-in ferrite bead. c Equivalent Circuit 0.70.2 2.60.3 0.70.2 (1) (2) (3) Input (Output) (1) Output (Input) (3) 1.60.3 Chip Ferrite Bead c Dimensions 6.80.5 GND (2) No polarity. 1.60.3 c Packaging Code Packaging Minimum Quantity (in mm) L 180mm Reel Embossed Tape 2500 K 330mm Reel Embossed Tape 8000 B Bulk(Bag) 500 Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insulation Resistance Operating (min.) Temperature Range Part Number Capacitance Rated Current Rated Voltage NFE61PT330B1H9p 33pF 30% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT680B1H9p 68pF 30% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT101Z1H9p 100pF 30% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT181B1H9p 180pF 30% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT361B1H9p 360pF 20% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT681B1H9p 680pF 30% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT102E1H9p 1000pF 80/-20% 2A 50Vdc 1000M ohm -40C to +85C NFE61PT472C1H9p 4700pF 80/-20% 2A 50Vdc 1000M ohm -40C to +85C Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) NFE61PT330B1H9 NFE61PT680B1H9 Insertion Loss (dB) 10 NFE61PT101Z1H9 20 NFE61PT181B1H9 NFE61PT361B1H9 30 NFE61PT681B1H9 NFE61PT102E1H9 40 NFE61PT472C1H9 50 60 0.1 1 10 Frequency (MHz) 100 1000 2000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Universal Type [Power Lines/Signal Lines] : Electrode !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 122 NFM Series Power Lines Type Chip EMIFILr NFM15PC NFM15PC Series 0402/1005 (inch/mm) 0402 size chip 3-terminal capacitor for power lines. c Equivalent Circuit 0.350.1 0.170.1 Input (Output) (1) 0.40.1 0.50.2 Output (Input) (3) No polarity. GND (2) 1.00.1 c Packaging (1) (3) 0.50.2 (2) (2) 0.150.1 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 500 : Electrode (in mm) c Dimensions NFM15PCC (0.47 to 1F) Chip Ferrite Bead c Dimensions c Equivalent Circuit 0.30.1 0.150.1 Input (Output) (1) 0.50.1 Output (Input) (3) Power Lines Type Chip EMIFILr NFM15PC (0.047, 0.1, 0.22, 4.3F) No polarity. 0.30.05 GND (2) c Packaging (1) (3) 0.50.1 (2) (2) 0.150.1 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insulation Resistance Operating (min.) Temperature Range Part Number Capacitance Rated Current Rated Voltage NFM15PC473C1A3p 0.047F 20% 1A 10Vdc 1000M ohm NFM15PC473C1C3p 0.047F 20% 1A 16Vdc 1000M ohm -55C to +85C NFM15PC104D0J3p 0.1F 20% 2A 6.3Vdc 1000M ohm -55C to +105C Chip Common Mode Choke Coil 1.00.1 NFM15PC104R1A3p 0.1F 20% 2A 10Vdc 1000M ohm -55C to +85C NFM15PC224D0J3p 0.22F 20% 2A 6.3Vdc 1000M ohm -55C to +105C NFM15PC224R1A3p 0.22F 20% 2A 10Vdc 1000M ohm -55C to +85C NFM15PC474D0G3p 0.47F 20% 2A 4Vdc 1000M ohm -55C to +105C NFM15PC474R0J3p 0.47F 20% 2A 6.3Vdc 1000M ohm -55C to +85C NFM15PC105R0G3p 1F 20% 2A 4Vdc 500M ohm -55C to +85C NFM15PC435R0E3p 4.3F 20% 2A 2.5Vdc 25M ohm -55C to +85C Block Type EMIFILr -55C to +105C Number of Circuit: 1 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 123 NFM Series Power Lines Type Chip EMIFILr NFM15PCSeries 0402/1005 (inch/mm) c Insertion Loss Characteristics 0 (50 - 50) NFM15PC473C1A3/C1C3 NFM15PC104D0J3/R1A3 Insertion Loss (dB) Chip Ferrite Bead 20 NFM15PC224D0J3/R1A3 40 60 NFM15PC474D0G3/R0J3 80 NFM15PC105R0G3 NFM15PC435R0E3 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Power Lines Type 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 124 NFM15PC NFM Series Power Lines Type Chip EMIFILr NFM18PS NFM18PS Series 0603/1608 (inch/mm) 3-terminal capacitor for power lines whose ground impedance has reduced. *Please refer to the products designed for both power lines and signal lines. Input (Output) (1) Output (Input) (3) 0.80.1 (2) 0.15+0.2 -0.1 (1) 0.2 min. No polarity. GND (3) (2) (2) 1.60.1 c Packaging 0.60.1 0.8+0.2 -0.1 Chip Ferrite Bead c Equivalent Circuit 0.15+0.2 -0.1 c Dimensions Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 0.40.1 : Electrode Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insulation Resistance Operating (min.) Temperature Range Part Number Capacitance Rated Current Rated Voltage NFM18PS474R0J3p 0.47F 20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PS105D0J3p 1.0F 20% 2A 6.3Vdc 500M ohm -55C to +125C NFM18PS105R0J3p 1.0F 20% 2A 6.3Vdc 500M ohm -55C to +105C Power Lines Type Chip EMIFILr (in mm) c Insertion Loss Characteristics 0 Chip Common Mode Choke Coil Number of Circuit: 1 (50 - 50) Insertion Loss (dB) 20 40 60 NFM18PS474R0J3 NFM18PS105R0J3/D0J3 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 125 NFM Series Power Lines Type Chip EMIFILr NFM18PC NFM18PC Series 0603/1608 (inch/mm) 4A max., 0603 size chip 3-terminal capacitor for power lines. *Please refer to the products designed for both power lines and signal lines. c Dimensions NFM18PC (0.1 to 0.47F, 2.2F - 6.3V) c Equivalent Circuit 0.40.1 0.80.1 Input (Output) (1) 0.60.1 Chip Ferrite Bead 0.250.1 Output (Input) (3) No polarity. GND (2) 0.2 min. 1.60.1 (2) (1) (3) 0.80.1 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (2) 0.20.1 Chip EMIFILr Power Lines Type (in mm) c Dimensions NFM18PC (1F, 2.2F - 10V) 0.2 min. c Equivalent Circuit 0.2 min. Input (Output) (1) (1) 0.80.1 (2) (3) Output (Input) (3) No polarity. GND (2) (2) 0.250.1 0.250.1 0.80.1 Block Type EMIFILr Chip Common Mode Choke Coil 0.40.1 1.60.1 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance Operating (min.) Temperature Range NFM18PC104R1C3p 0.1F 20% 2A 16Vdc 1000M ohm -55C to +125C NFM18PC224R0J3p 0.22F 20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PC474R0J3p 0.47F 20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PC105R0J3p 1.0F 20% 4A 6.3Vdc 500M ohm -55C to +105C NFM18PC225B0J3p 2.2F 20% 2A 6.3Vdc 200M ohm -40C to +85C NFM18PC225B1A3p 2.2F 20% 4A 10Vdc 200M ohm -40C to +85C Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) NFM18PC104R1C3 20 Insertion Loss (dB) Microwave Absorber NFM18PC224R0J3 NFM18PC474R0J3 40 NFM18PC105R0J3 60 NFM18PC225B1A3 (10V) 80 NFM18PC225B0J3 (6.3V) 100 0.1 1 10 100 Frequency (MHz) 1000 6000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 126 EMI Suppression Effect NFM18PS Series s (IGH FREQUENCY PERFORMANCE OF .&-03 SERIES 2 terminal MLCC: 2012mm size (0.1Fx10pcs parallel) 10 20 30 I.L. (dB) 40 NFM18PC105R0J3 1pc : 1608mm size (1.0Fx1) 50 Chip Ferrite Bead #HIP TERMINAL CAPACITOR (50 ohm - 50 ohm) 0 60 70 80 1 10 100 Frequency (MHz) 1000 10000 .&-03 SERIES HAS BETTER HIGH FREQUENCY PERFORMANCE COMPARED TO NORMAL CHIP TERMINAL CAPACITORS s /PTIMIZE OF BYPASS CAPACITORS USING CHIP TERMINAL CAPACITOR Bypass capacitor chip 3-terminal capacitor IC ry Memo .UMBER OF PARTS CAN BE REDUCED s 2EDUCE 0#" SPACE s 2EDUCE MOUNT COST Chip Common Mode Choke Coil IC ry Memo Comparison of performance as a bypass capacitor 7ITHOUT CAPACITOR 7ITH CHIP TERMINAL CAPACITOR .&- &X 7ITH -,## &X Micro computer Micro computer Inner layer power pattern Micro computer Block Type EMIFILr 100 0.1 Power Lines Type Chip EMIFILr NFM18PS105R0J3 1pc : 1608mm size (1.0Fx1) 90 GND Power line MLCC NFM 30 20 0 200 400 600 Frequency (MHz) 800 1000 50 40 30 20 10 0 200 400 600 Frequency (MHz) 800 1000 50 Microwave Absorber 40 60 Noise Level (dBV/m) 50 10 MLCC 60 Noise Level (dBV/m) Noise Level (dBV/m) 60 40 30 20 10 0 200 400 600 Frequency (MHz) 800 1000 Noise suppression effect of NFM series is better than MLCCs (1 NFM is better than 4 MLCCs). !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 127 NFM Series Power Lines Type Chip EMIFILr NFM21PS NFM21PS Series 0805/2012 (inch/mm) 0805 size 3-terminal capacitor with very low ground impedance. c Dimensions c Equivalent Circuit 1.250.1 Input (Output) (1) 0.850.1 Chip Ferrite Bead 1.20.3 No polarity. GND (2) 2.00.2 0.60.2 (2) 0.2+0.2 -0.1 (1) c Packaging (3) 0.2+0.2 -0.1 0.2 min. (2) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Power Lines Type (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage NFM21PS106B0J3p 10F 20% 4A 6.3Vdc Insulation Resistance Operating (min.) Temperature Range 50M ohm Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) Insertion Loss (dB) 20 40 NFM21PS106B0J3 60 80 100 0.1 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Output (Input) (3) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 128 -40C to +85C NFM Series Power Lines Type Chip EMIFILr NFM21PC NFM21PC Series 0805/2012 (inch/mm) 6A max., 0805 size chip 3-terminal capacitor for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit 0.40.2 Input (Output) (1) 0.850.1 0.30.2 Output (Input) (3) No polarity. GND (2) 0.60.2 1.250.1 2.00.2 (2) Chip Ferrite Bead c Dimensions c Packaging (3) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage NFM21PC104R1E3p 0.1F 20% 2A 25Vdc 1000M ohm -55C to +125C NFM21PC224R1C3p 0.22F 20% 2A 16Vdc 1000M ohm -55C to +125C NFM21PC474R1C3p 0.47F 20% 2A 16Vdc 1000M ohm -55C to +125C NFM21PC105B1A3p 1.0F 20% 4A 10Vdc 500M ohm -40C to +85C NFM21PC105B1C3p 1.0F 20% 4A 16Vdc 500M ohm -40C to +85C NFM21PC225B0J3p 2.2F 20% 4A 6.3Vdc 200M ohm -40C to +85C NFM21PC475B1A3p 4.7F 20% 6A 10Vdc 100M ohm -40C to +85C Chip Common Mode Choke Coil Insulation Resistance Operating (min.) Temperature Range Part Number Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) NFM21PC104R1E3 NFM21PC224R1C3 NFM21PC474R1C3 NFM21PC105B1A3 (10V)/1C3 (16V) 40 60 NFM21PC225B0J3 Block Type EMIFILr Insertion Loss (dB) 20 Power Lines Type Chip EMIFILr (2) 0.250.2 (1) NFM21PC475B1A3 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 129 NFM Series Power Lines Type Chip EMIFILr NFM3DPC NFM3DPC Series 1205/3212 (inch/mm) 1205 size 3-terminal capacitor for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit Chip Ferrite Bead 0.70.2 c Dimensions Input (Output) (1) 1.10.3 No polarity. 3.20.2 GND 1.250.2 (2) (2) (3) 0.250.2 (1) c Packaging (2) : Electrode 0.30.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 (in mm) Chip EMIFILr Power Lines Type Output (Input) (3) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage NFM3DPC223R1H3p 0.022F 20% 2A 50Vdc Insulation Resistance Operating (min.) Temperature Range 1000M ohm -55C to +125C Number of Circuit: 1 c Insertion Loss Characteristics (50 - 50) NFM3DPC223R1H3 Insertion Loss (dB) c Notice (Rating) When NFM3DPC series is used in operating temperature exceeding +85C, derating of current is necessary. Please apply the derating curve shown in chart according to the operating temperature. 20 40 60 Derating of Rated Current 80 1 10 100 Frequency (MHz) 1000 6000 Rated Current (A) 2.0 100 0.1 0.5 Block Type EMIFILr Chip Common Mode Choke Coil 0 85 Operating Temperature (C) 125 Microwave Absorber 0 -55 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 130 NFM Series Power Lines Type Chip EMIFILr NFM31PC NFM31PC Series 1206/3216 (inch/mm) 6A/27microF, 1206 size chip 3-terminal capacitor for power lines. *Please refer to the products designed for both power lines and signal lines. 0.40.3 Input (Output) (1) 1.60.2 Output (Input) (3) No polarity. GND (2) 3.20.2 (2) (3) (2) c Packaging 1.60.2 (1) 0.30.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage NFM31PC276B0J3p 27F 20% 6A 6.3Vdc Insulation Resistance Operating (min.) Temperature Range 20M ohm -40C to +85C Power Lines Type Chip EMIFILr 1.10.3 1.30.2 0.40.3 c Equivalent Circuit Chip Ferrite Bead c Dimensions Number of Circuit: 1 0 (50 - 50) Chip Common Mode Choke Coil c Insertion Loss Characteristics Insertion Loss (dB) 20 40 NFM31PC276B0J3 60 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 131 NFM Series Power Lines Type Chip EMIFILr NFM31KC NFM31KC Series 1206/3216 (inch/mm) Capable for 10A max. Large current 3-terminal capacitor. c Dimensions 0.40.3 1.20.3 0.40.3 c Equivalent Circuit 1.60.2 No polarity. GND (2) 3.20.2 (2) (2) c Packaging 1.60.2 (3) 0.30.2 (1) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 : Electrode Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM31KC103R1H3p 10000pF 20% 10A 50Vdc 1000M ohm -55C to +125C NFM31KC103R2A3p 10000pF 20% 10A 100Vdc 1000M ohm -55C to +125C NFM31KC153R1H3p 15000pF 20% 10A 50Vdc 1000M ohm -55C to +125C NFM31KC153R2A3p 15000pF 20% 10A 100Vdc 1000M ohm -55C to +105C NFM31KC223R1H3p 22000pF 20% 10A 50Vdc 1000M ohm -55C to +125C NFM31KC223R2A3p 22000pF 20% 10A 100Vdc 1000M ohm -55C to +105C NFM31KC104R1H3p 100000pF 20% 6A 50Vdc 1000M ohm -55C to +125C NFM31KC104R2A3p 100000pF 20% 6A 100Vdc 1000M ohm -55C to +105C Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) 20 Insertion Loss (dB) 40 60 NFM31KC104R1H3/R2A3 NFM31KC223R1H3/R2A3 NFM31KC153R1H3/R2A3 NFM31KC103R1H3 NFM31KC103R2A3 c Notice (Rating) When NFM31KC series is used in operating temperatures exceeding +105C, derating of current is necessary. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current (Except for NFM31KC 153/223/104 R2A3, NFM31KC104R1H3) 80 12 100 0.1 1 10 100 Frequency (MHz) 1000 10 6000 Rated Current (A) Chip Common Mode Choke Coil Chip EMIFILr Power Lines Type (in mm) Block Type EMIFILr Output (Input) (3) 1.30.2 Chip Ferrite Bead Input (Output) (1) 8 6 4 2 Microwave Absorber 0 -55 105 125 Operating Temperature (C) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 132 NFM Series Power Lines Type Chip EMIFILr NFM41PC NFM41PC Series 1806/4516 (inch/mm) 6A max., 1806 size chip 3-terminal capacitor for power lines. *Please refer to the products designed for both power lines and signal lines. c Equivalent Circuit 1.60.3 Input (Output) (1) Output (Input) (3) No polarity. GND (2) 0.7 min. 4.50.3 (2) (3) (2) c Packaging 1.60.3 (1) 0.3+0.3 -0.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance NFM41PC204F1H3p 0.2F 80/-20% Rated Current Rated Voltage 2A 50Vdc Insulation Resistance Operating (min.) Temperature Range 1000M ohm -55C to +85C NFM41PC155B1E3p 1.5F 20% 6A 25Vdc 300M ohm -55C to +85C NFM41PC155B1H3p 1.5F 20% 6A 50Vdc 100M ohm -55C to +85C Power Lines Type Chip EMIFILr 1.50.3 1.00.2 0.40.3 Chip Ferrite Bead c Dimensions c Insertion Loss Characteristics 0 Chip Common Mode Choke Coil Number of Circuit: 1 (50 - 50) 20 Insertion Loss (dB) NFM41PC204F1H3 40 60 NFM41PC155B1E3/1H3 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 133 NFM Series Signal Lines Type Chip EMIFILr NFM15CC NFM15CC Series 0402/1005 (inch/mm) 0402 size chip 3-terminal capacitor for signal lines. c Dimensions c Equivalent Circuit 0.350.1 Input (Output) (1) 0.50.2 0.40.1 Chip Ferrite Bead 0.170.1 No polarity. GND (2) 1.00.1 c Packaging (1) (3) 0.50.2 (2) (2) 0.150.1 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Signal Lines Type (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM15CC222D1A3p 2200pF 20% 1A 10Vdc 1000M ohm -55C to +105C NFM15CC222D1C3p 2200pF 20% 1A 16Vdc 1000M ohm -55C to +85C NFM15CC223C1A3p 22000pF 20% 1A 10Vdc 1000M ohm -55C to +105C NFM15CC223C1C3p 22000pF 20% 1A 16Vdc 1000M ohm -55C to +85C Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) 20 Insertion Loss (dB) Chip Common Mode Choke Coil Output (Input) (3) 40 NFM15CC223C1A3/C1C3 NFM15CC222D1A3/D1C3 60 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 134 NFM Series Signal Lines Type Chip EMIFILr NFM18CC NFM18CC Series 0603/1608 (inch/mm) 0603 size general 3-terminal capacitor. c Equivalent Circuit 0.40.1 0.80.1 Input (Output) (1) 0.60.1 Output (Input) (3) No polarity. GND (2) 0.2 min. 1.60.1 (2) (3) 0.80.1 (1) c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (2) 0.20.1 (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage NFM18CC220U1C3p 22pF 20% 400mA 16Vdc 1000M ohm -55C to +125C NFM18CC470U1C3p 47pF 20% 400mA 16Vdc 1000M ohm -55C to +125C NFM18CC101R1C3p 100pF 20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC221R1C3p 220pF 20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC471R1C3p 470pF 20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC102R1C3p 1000pF 20% 600mA 16Vdc 1000M ohm -55C to +125C NFM18CC222R1C3p 2200pF 20% 700mA 16Vdc 1000M ohm -55C to +125C NFM18CC223R1C3p 22000pF 20% 1000mA 16Vdc 1000M ohm -55C to +125C Chip Common Mode Choke Coil Insulation Resistance Operating (min.) Temperature Range Part Number Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) 20 NFM18CC223R1C3 NFM18CC222R1C3 40 NFM18CC102R1C3 NFM18CC471R1C3 NFM18CC221R1C3 60 NFM18CC101R1C3 Block Type EMIFILr Insertion Loss (dB) Signal Lines Type Chip EMIFILr 0.250.1 Chip Ferrite Bead c Dimensions NFM18CC470U1C3 NFM18CC220U1C3 80 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 135 NFM Series Signal Lines Type Chip EMIFILr NFM21CC NFM21CC Series 0805/2012 (inch/mm) 0805 size general 3-terminal capacitor. c Dimensions c Equivalent Circuit 0.30.2 0.850.1 Chip Ferrite Bead Input (Output) (1) No polarity. GND (2) 0.60.2 2.00.2 1.250.1 (2) (2) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insulation Resistance Operating (min.) Temperature Range Part Number Capacitance Rated Current Rated Voltage NFM21CC220U1H3p 22pF 20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC470U1H3p 47pF 20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC101U1H3p 100pF 20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC221R1H3p 220pF 20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC471R1H3p 470pF 20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC102R1H3p 1000pF 20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC222R1H3p 2200pF 20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC223R1H3p 22000pF 20% 2000mA 50Vdc 1000M ohm -55C to +125C Number of Circuit: 1 c Insertion Loss Characteristics 0 20 Insertion Loss (dB) Chip EMIFILr Signal Lines Type Chip Common Mode Choke Coil c Packaging (3) 0.2+0.2 -0.1 (1) (50 - 50) NFM21CC223R1H3 NFM21CC222R1H3 40 NFM21CC102R1H3 NFM21CC471R1H3 NFM21CC221R1H3 60 NFM21CC101U1H3 NFM21CC470U1H3 80 NFM21CC220U1H3 100 0.1 1 10 100 Frequency (MHz) 1000 6000 Microwave Absorber Block Type EMIFILr Output (Input) (3) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 136 NFM Series Signal Lines Type Chip EMIFILr NFM3DCC NFM3DCC Series 1205/3212 (inch/mm) 1205 size general 3-terminal capacitor. Input (Output) (1) Output (Input) (3) 1.10.3 No polarity. GND 1.250.2 (2) (2) (3) c Packaging (2) 0.30.2 : Electrode Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM3DCC220U1H3p 22pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC470U1H3p 47pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC101U1H3p 100pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC221R1H3p 220pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC471R1H3p 470pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC102R1H3p 1000pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC222R1H3p 2200pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC223R1H3p 22000pF +50/-20% 300mA 50Vdc 1000M ohm -55C to +125C Number of Circuit: 1 c Insertion Loss Characteristics 0 NFM3DCC223R1H3 NFM3DCC222R1H3 NFM3DCC102R1H3 40 NFM3DCC471R1H3 NFM3DCC221R1H3 NFM3DCC101U1H3 60 Block Type EMIFILr Insertion Loss (dB) 20 (50 - 50) Signal Lines Type Chip EMIFILr 0.250.2 (1) Chip Common Mode Choke Coil 3.20.2 Chip Ferrite Bead c Equivalent Circuit 0.70.2 c Dimensions NFM3DCC470U1H3 NFM3DCC220U1H3 80 1 10 Frequency (MHz) 100 1000 2000 Microwave Absorber 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 137 NFM Series Signal Lines Type Chip EMIFILr NFM41CC NFM41CC Series 1806/4516 (inch/mm) 1806 size general 3-terminal capacitor. c Dimensions c Equivalent Circuit Chip Ferrite Bead 1.00.2 Input (Output) (1) No polarity. 1.50.3 4.50.3 GND 1.60.3 (2) (2) c Packaging (3) 0.3+0.3 -0.2 (1) (2) 0.40.3 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 : Electrode Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM41CC220U2A3p 22pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC470U2A3p 47pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC101U2A3p 100pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC221U2A3p 220pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC471R2A3p 470pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC102R2A3p 1000pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC222R2A3p 2200pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC223R2A3p 22000pF +50/-20% 300mA 100Vdc 10000M ohm -55C to +125C Number of Circuit: 1 c Insertion Loss Characteristics 0 20 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) (50 - 50) NFM41CC223R2A3 NFM41CC222R2A3 NFM41CC102R2A3 40 NFM41CC471R2A3 NFM41CC221U2A3 60 NFM41CC101U2A3 NFM41CC470U2A3 NFM41CC220U2A3 80 100 0.1 1 10 Frequency (MHz) 100 1000 2000 Microwave Absorber Block Type EMIFILr Output (Input) (3) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 138 NFA Series Signal Lines Type Chip EMIFILr NFA31CC NFA31CC Series 1206/3216 (inch/mm) 4-line chip 3-terminal capacitor array, 1206 size. c Equivalent Circuit 3.20.2 (7) 0.80.1 (10) 0.80.2 (8) (9) GND (1) (2) GND (3) 0.40.2 (7) Input (Output) (8) (9) 1.60.2 (4) (5) (6) 1.10.5 Output (Input) No polarity. (10) Chip Ferrite Bead c Dimensions (3) 0.05 min. 0.05 min. (4) (5) (6) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 100 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage NFA31CC220S1E4p 22pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC470S1E4p 47pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC101S1E4p 100pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC221S1E4p 220pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC471R1E4p 470pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC102R1E4p 1000pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC222R1E4p 2200pF 20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC223R1C4p 22000pF 20% 200mA 16Vdc 1000M ohm -40C to +85C Chip Common Mode Choke Coil Insulation Resistance Operating (min.) Temperature Range Part Number Number of Circuit: 4 c Insertion Loss Characteristics (50 - 50) 0 NFA31CC470S1E4 NFA31CC220S1E4 20 NFA31CC223R1C4 40 NFA31CC222R1E4 NFA31CC102R1E4 60 NFA31CC471R1E4 Block Type EMIFILr Insertion Loss (dB) Signal Lines Type Chip EMIFILr c Packaging (2) (1) NFA31CC221S1E4 NFA31CC101S1E4 80 100 10 100 Frequency (MHz) 1000 2000 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 139 NFL Series Signal Lines Type Chip EMIFILr NFL15ST NFL15ST Series 0402/1005 (inch/mm) T-type LC filter, ultra-compact size of 0402. c Dimensions Chip Ferrite Bead (Top View) c Equivalent Circuit (4) (1) (3) (2) (Side View) NC (4) Directional Marking 0.50.15 0.350.15 GND (2) (Bottom View) c Packaging 0.30.05 1.00.05 0.50.05 0.150.10 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Signal Lines Type 0.150.10 (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Nominal Cut-off Capacitance Frequency Part Number Inductance Insertion Loss 1 Insertion Loss 2 Rated Rated Current Voltage NFL15ST157X0J3p 150MHz 22pF (Typ.) 115nH (Typ.) 6dB max.(0 to 150MHz) 25dB min.(400 to 1000MHz) 50mA 6.3Vdc NFL15ST207X0J3p 200MHz 17pF (Typ.) 105nH (Typ.) 6dB max.(0 to 200MHz) 25dB min.(600 to 1000MHz) 50mA 6.3Vdc NFL15ST307X0J3p 300MHz 12pF (Typ.) 95nH (Typ.) 6dB max.(0 to 300MHz) 25dB min.(800 to 1000MHz) 50mA 6.3Vdc NFL15ST507X0J3p 500MHz 7pF (Typ.) 60nH (Typ.) 6dB max.(0 to 500MHz) 6.3Vdc Insulation Resistance (min.): 1000M ohm Withstand Voltage: 18.9Vdc 25dB min.(1000MHz) Operating Temperature Range: -40C to +85C Number of Circuits: 1 c Insertion Loss Characteristics 0 NFL15ST157X0J3 20 Insertion Loss (dB) Chip Common Mode Choke Coil Output (Input) (3) Input (Output) (1) NFL15ST207X0J3 NFL15ST307X0J3 NFL15ST507X0J3 40 60 80 10 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 140 50mA NFL Series Signal Lines Type Chip EMIFILr NFL18ST NFL18ST Series 0603/1608 (inch/mm) T-type LC filter. Reduces waveform distortion of high speed signal. c Equivalent Circuit (Top View) Input (Output) (1) (3) (2) (Side View) 0.30.1 *1 Directional Marking GND (2) 0.20.1 No Polarity. 0.60.1 0.20.1 c Packaging 0.2 min. (Bottom View) : Electrode (in mm) 0.150.1 *1 There are no electrical polarity. But there is a directional marking on the top of product to identify inner physical direction. c Dimensions NFL18ST_X 0.2 min. Packaging D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 c Equivalent Circuit Input (Output) (1) 0.2 min. Minimum Quantity Code Output (Input) (3) (1) 0.80.1 (2) (3) GND (2) (2) 0.250.1 0.250.1 Signal Lines Type Chip EMIFILr (1) Output (Input) (3) 0.80.1 (2) Chip Ferrite Bead c Dimensions 1.60.1 NFL18ST_H 0.80.1 No Polarity. 0.40.1 c Packaging : Electrode (in mm) Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insertion Loss 1 Insertion Loss 2 Rated Rated Current Voltage NFL18ST506H1A3p 50MHz 110pF (Typ.) 350nH (Typ.) 6dB max.(0 to 50MHz) 30dB min.(200 to 1000MHz) 75mA 10Vdc NFL18ST706H1A3p 70MHz 70pF (Typ.) 230nH (Typ.) 6dB max.(0 to 70MHz) 30dB min.(300 to 1000MHz) 75mA 10Vdc NFL18ST107H1A3p 100MHz 50pF (Typ.) 150nH (Typ.) 6dB max.(0 to 100MHz) 30dB min.(400 to 1000MHz) 75mA 10Vdc NFL18ST207H1A3p 200MHz 22pF (Typ.) 110nH (Typ.) 6dB max.(0 to 200MHz) 30dB min.(800 to 2000MHz) 100mA 10Vdc NFL18ST307H1A3p 300MHz 16pF (Typ.) 74nH (Typ.) 6dB max.(0 to 300MHz) 30dB min.(1200 to 2000MHz) 100mA 10Vdc NFL18ST507H1A3p 500MHz 10pF (Typ.) 42nH (Typ.) 6dB max.(0 to 500MHz) 30dB min.(1700 to 2000MHz) 100mA 10Vdc Insulation Resistance (min.): 1000M ohm Withstand Voltage: 30Vdc Operating Temperature Range: -55C to +125C Block Type EMIFILr Nominal Cut-off Capacitance Inductance Frequency Part Number Chip Common Mode Choke Coil 1.60.1 Number of Circuits: 1 c Insertion Loss Characteristics NFL18ST_H Series 0 NFL18ST506H1A3 20 NFL18ST107H1A3 Microwave Absorber Insertion Loss (dB) NFL18ST706H1A3 40 NFL18ST207H1A3 NFL18ST307H1A3 60 NFL18ST507H1A3 80 100 1 !Note 10 100 Frequency (MHz) 1000 3000 Continued on the following page. * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 141 NFL Series Signal Lines Type Chip EMIFILr NFL18ST Series 0603/1608 (inch/mm) NFL18ST c Rated Value (p: packaging code) Chip Ferrite Bead Part Number Nominal Capacitance Cut-off Frequency Inductance Rated Current Rated Voltage Insulation Withstand Operating Resistance Voltage Temperature Range (min.) NFL18ST207X1C3p 200MHz 25pF20% 110nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL18ST307X1C3p 300MHz 18pF20% 62nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL18ST507X1C3p 500MHz 10pF20% 43nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C Number of Circuits: 1 c Insertion Loss Characteristics NFL18ST_X Series (50 - 50) 0 NFL18ST507X1C3 Insertion Loss (dB) Chip EMIFILr Signal Lines Type 20 NFL18ST307X1C3 NFL18ST207X1C3 40 60 80 10 100 Frequency (MHz) 1000 5000 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 142 NFL Series Signal Lines Type Chip EMIFILr NFL18SP NFL18SP Series 0603/1608 (inch/mm) PI-type LC filter. Reduces waveform distortion of high speed signal. c Equivalent Circuit 0.150.1 Input (Output) (1) (3) Output (Input) (3) 0.80.1 (1) (1) (3) (2) GND (2) 1.60.1 No polarity. 0.2 min. 0.60.1 c Packaging 0.30.1 0.40.1 0.30.1 0.150.1 Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 0.150.1 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Insulation Withstand Operating Resistance Voltage Temperature Range (min.) Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage NFL18SP157X1A3p 150MHz 34pF20% 100nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP207X1A3p 200MHz 24pF20% 80nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP307X1A3p 300MHz 19pF20% 60nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP507X1A3p 500MHz 11pF20% 38nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C Signal Lines Type Chip EMIFILr (2) Chip Ferrite Bead c Dimensions Chip Common Mode Choke Coil Number of Circuits: 1 c Insertion Loss Characteristics (50 - 50) 0 NFL18SP157X1A3 NFL18SP207X1A3 Insertion Loss (dB) 20 NFL18SP307X1A3 NFL18SP507X1A3 40 60 80 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 10 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 143 NFL Series Signal Lines Type Chip EMIFILr NFL21SP NFL21SP Series 0805/2012 (inch/mm) PI-type LC filter. Reduces waveform distortion of high speed signal. c Dimensions c Equivalent Circuit 0.40.2 Input (Output) (1) Output (Input) (3) 0.850.1 Chip Ferrite Bead 0.30.2 0.60.2 GND (2) 2.00.2 No polarity. (1) 1.250.1 (2) (3) (2) c Packaging Minimum Quantity Code Packaging D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 0.250.2 : Electrode Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage Insulation Resistance (min.) NFL21SP106X1C3p 10MHz 670pF20% 680nH20% 100mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP206X1C7p 20MHz 240pF20% 700nH20% 100mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP506X1C3p 50MHz 84pF20% 305nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP706X1C3p 70MHz 76pF20% 185nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP107X1C3p 100MHz 44pF20% 135nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP157X1C3p 150MHz 28pF20% 128nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP207X1C3p 200MHz 22pF20% 72nH20% 250mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP307X1C3p 300MHz 19pF10% 45nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP407X1C3p 400MHz 16pF10% 34nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP507X1C3p 500MHz 12pF10% 31nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C Number of Circuits: 1 c Insertion Loss Characteristics (50 - 50) 0 NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 Insertion Loss (dB) 20 Block Type EMIFILr Withstand Operating Voltage Temperature Range 40 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 60 80 10 100 Frequency (MHz) 1000 2000 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 144 NFA Series Signal Lines Type Chip EMIFILr NFA18SL NFA18SL Series 0603/1608 (inch/mm) LC filter 4-line array for mobile phones. c Dimensions 1.60.1 c Equivalent Circuit (Top View) (6) (3) GND (2) (7) 0.150.1 (8) (9) (10) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) 0.20.1 Directional Marking 0.250.1 c Dimensions (3) (4) (5) (8) (9) (10) 180mm Reel Embossed Tape 4000 Bulk(Bag) 1000 (5) (6) GND (1) (2) GND (7) 0.40.05 (8) (9) (10) 0.6+0.05 -0.1 0.250.1 c Packaging 0.20.1 (Bottom View) Minimum Quantity Code Packaging L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) c Dimensions c Equivalent Circuit 1.60.1 (Top View) (3) (4) (5) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) GND (1) (2) GND (3) (4) (5) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) 0.80.1 NFA18SL 307/407/487 V1A45 (4) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) 0.20.1 Directional Marking (Side View) L B (3) GND (2) (7) Packaging (6) (1) GND 0.150.1 Minimum Quantity Code c Equivalent Circuit 1.60.1 (Top View) 0.80.1 NFA18SL227V1A45 (2) GND c Packaging Part Number T NFA18SL357V1A45 0.50.1 NFA18SL137V1A45 NFA18SL187V1A45 +0.05 0.6-0.1 NFA18SL207V1A45 NFA18SL506X1A45 (in mm) 0.20.1 GND (1) (7) (8) (9) (10) *Please change IN/OUT according to the circuit condition. T (Bottom View) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) : Electrode 0.40.05 (Side View) (5) Chip Ferrite Bead (1) GND (4) Signal Lines Type Chip EMIFILr (5) GND (1) (8) (2) GND (9) (10) Directional Marking 0.50.1 (7) Chip Common Mode Choke Coil (4) (Side View) 0.20.1 0.40.05 (7) (8) (9) (10) *Please change IN/OUT according to the circuit condition. c Packaging 0.250.1 0.150.1 (Bottom View) 0.200.1 Minimum Quantity Code Packaging L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. Block Type EMIFILr (3) 0.80.1 NFA18SL 137/187/207/357 V1A45 NFA18SL506X1A45 c Rated Value (p: packaging code) Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated Insulation Withstand Resistance Cut-off (Cut-off (470MHz) (800MHz) (900MHz) (2000MHz) Voltage Current Voltage (min.) Frequency Frequency) (min.) (min.) (min.) (min.) NFA18SL137V1A45p 130MHz 6dB max. 25dB - 25dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL187V1A45p 180MHz 6dB max. 20dB - 20dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL207V1A45p 200MHz 6dB max. 15dB - 15dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL227V1A45p 220MHz 6dB max. - - 30dB 30dB 25mA 10Vdc 1000M ohm 30Vdc NFA18SL307V1A45p 300MHz 6dB max. - 20dB 20dB - 100mA 10Vdc 1000M ohm 30Vdc NFA18SL357V1A45p 350MHz 6dB max. - - 15dB 13dB 35mA 10Vdc 1000M ohm 30Vdc NFA18SL407V1A45p 400MHz 6dB max. - 18dB 18dB - 100mA 10Vdc 1000M ohm 30Vdc NFA18SL487V1A45p 480MHz 6dB max. - 15dB 15dB - 100mA 10Vdc 1000M ohm 30Vdc Operating Temperature Range: -40C to +85C (NFA18SL 137/187/207/227/357 V1A45), -55C to +125C (NFA18SL 307/407/487 V1A45) Number of Circuits: 4 Microwave Absorber Part Number Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 145 NFA Series Signal Lines Type Chip EMIFILr NFA18SL Series 0603/1608 (inch/mm) NFA18SL c Insertion Loss Characteristics NFA18SL 137/187/207 V1A45 NFA18SL227V1A45 (50 - 50) 0 (50 - 50) 0 NFA18SL137V1A45 20 20 NFA18SL187V1A45 Insertion Loss (dB) Insertion Loss (dB) Chip Ferrite Bead NFA18SL207V1A45 40 60 100 Frequency (MHz) 1000 80 10 3000 NFA18SL 307/407/487 V1A45 100 Frequency (MHz) 1000 (50 - 50) 0 NFA18SL307V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SL357V1A45 20 Insertion Loss (dB) 20 40 40 60 60 80 10 100 Frequency (MHz) 1000 3000 80 10 100 Frequency (MHz) 1000 Part Number Nominal Cut-off Frequency NFA18SL506X1A45p 50MHz Insertion Loss Insertion Loss Insertion Loss Rated Rated Insulation Withstand Resistance Voltage (Cut-off Frequency) (500MHz) (min.) (1000MHz) (min.) Current Voltage (min.) 6dB max. 30dB 25dB 25mA 10Vdc 1000M ohm Number of Circuits: 4 c Insertion Loss Characteristics NFA18SL_X (50 - 50) 0 NFA18SL506X1A45 20 Insertion Loss (dB) Block Type EMIFILr 3000 c Rated Value (p: packaging code) Operating Temperature Range: -40C to +85C 40 60 Microwave Absorber 3000 NFA18SL357V1A45 (50 - 50) 0 Insertion Loss (dB) Chip EMIFILr Signal Lines Type NFA18SL227V1A45 60 80 10 Chip Common Mode Choke Coil 40 80 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 146 30Vdc NFA Series Signal Lines Type Chip EMIFILr NFA18SD NFA18SD Series 0603/1608 (inch/mm) For differential signal I/F of LCD or camera in mobile phones. c Dimensions c Equivalent Circuit (3) 1.60.1 (5) (1) GND 0.150.1 GND (2) (7) (8) (9) (10) 0.20.1 Directional Marking 0.40.05 (5) (6) GND (1) (2) GND (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (7) (8) (9) (10) 0.250.1 0.6+0.05 -0.1 (Side View) (4) (6) Chip Ferrite Bead (4) c Packaging 0.20.1 (Bottom View) Minimum Quantity Code Packaging L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated Cut-off Frequency (Cut-off Frequency) (500MHz) (min.) (900MHz) (min.) (1500MHz) (min.) (2000MHz) (min.) Current Voltage Insulation Resistance (min.) Withstand Voltage NFA18SD187X1A45p 180MHz 6dB max. 15dB 20dB 20dB 20dB 25mA 10Vdc 1000M ohm 30Vdc NFA18SD207X1A45p 200MHz 6dB max. 13dB 20dB 20dB 20dB 25mA 10Vdc 1000M ohm 30Vdc Operating Temperature Range: -40C to +85C Number of Circuits: 4 c Insertion Loss Characteristics (50 - 50) 0 Chip Common Mode Choke Coil Part Number 10 Insertion Loss (dB) NFA18SD207X1A45 NFA18SD187X1A45 20 30 40 100 Frequency (MHz) 1000 3000 Microwave Absorber Block Type EMIFILr 50 10 Signal Lines Type Chip EMIFILr (3) 0.80.1 (Top View) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 147 NFA Series Signal Lines Type Chip EMIFILr NFA21SL NFA21SL Series 0805/2012 (inch/mm) L-type LC filter 4-line array for mobile phones. c Dimensions (Top View) c Equivalent Circuit (3) 2.00.1 0.20.15 (7) (8) (9) (10) 0.20.15 (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (8) (9) (10) c Packaging : Electrode Minimum Quantity Code Packaging L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Nominal Insertion Loss Insertion Loss Insertion Loss Rated Cut-off Frequency (Cut-off Frequency) (800MHz) (min.) (900MHz) (min.) Current Part Number Rated Insulation Withstand Resistance Voltage Voltage (min.) NFA21SL287V1A45p 280MHz 6dB max. 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL317V1A45p 310MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL337V1A45p 330MHz 6dB max. 15dB 15dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL287V1A48p 280MHz 6dB max. 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL317V1A48p 310MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL337V1A48p 330MHz 6dB max. 20dB 20dB 100mA 10Vdc 1000M ohm 30Vdc Operating Temperature Range: -55C to +125C Number of Circuits: 4 c Insertion Loss Characteristics NFA21SL_V1A45 NFA21SL_V1A48 (50 - 50) 0 (50 - 50) NFA21SL337V1A48 0 NFA21SL287V1A45 NFA21SL317V1A45 NFA21SL337V1A45 20 NFA21SL287V1A48 20 Insertion Loss (dB) NFA21SL317V1A48 Insertion Loss (dB) Chip EMIFILr Signal Lines Type GND (2) (7) Part Number T NFA21SLpppX1A45p 0.50.1 NFA21SLpppV1A45p NFA21SLpppX1A48p 0.850.1 NFA21SLpppV1A48p (Bottom View) Chip Common Mode Choke Coil (6) 0.250.1 0.50.05 40 40 60 60 80 10 100 Frequency (MHz) 1000 3000 80 10 100 Frequency (MHz) 1000 3000 Continued on the following page. Microwave Absorber Block Type EMIFILr (5) (1) GND T 0.15 min. 1.250.1 GND (2) 0.250.1 Chip Ferrite Bead (1) GND 0.250.1 (4) Directional Marking (3) (4) (5) (6) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 148 NFA Series Signal Lines Type Chip EMIFILr NFA21SL Series 0805/2012 (inch/mm) NFA21SL c Rated Value (p: packaging code) Insulation Withstand Resistance Voltage (min.) NFA21SL207X1A45p 200MHz 2dB to 7dB 13dB 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL307X1A45p 300MHz 2dB to 7dB 7dB 20dB 25dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL506X1A48p 50MHz 0dB to 6dB 30dB - 20dB 20mA 10Vdc 1000M ohm 30Vdc NFA21SL806X1A48p 80MHz 2dB to 7dB 25dB - 25dB 20mA 10Vdc 1000M ohm 30Vdc NFA21SL207X1A48p 200MHz 2dB to 7dB 13dB 25dB 25dB 100mA 10Vdc 1000M ohm 30Vdc NFA21SL307X1A48p 300MHz 2dB to 7dB 7dB 20dB 25dB 100mA 10Vdc 1000M ohm 30Vdc Operating Temperature Range: -55C to +125C Chip Ferrite Bead Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated Cut-off Frequency (Cut-off Frequency) (500MHz) (min.) (800MHz) (min.) (1000MHz) (min.) Current Voltage Part Number Number of Circuits: 4 c Insertion Loss Characteristics NFA21SL_X (50 - 50) 0 NFA21SL806X1A48 NFA21SL207X1A45(48) NFA21SL307X1A45(48) 20 Insertion Loss (dB) Signal Lines Type Chip EMIFILr NFA21SL506X1A48 40 60 80 100 Frequency (MHz) 1000 3000 Chip Common Mode Choke Coil 10 Microwave Absorber Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 149 NFW Series Signal Lines Type Chip EMIFILr NFW31SP NFW31SP Series 1206/3216 (inch/mm) Wire-wound PI-type LC filter. c Dimensions c Equivalent Circuit Input (Output) (1) Output (Input) (3) 1.80.2 Chip Ferrite Bead 2.30.2 GND (2) 1.60.2 3.20.3 No polarity. (1) (3) (2) c Packaging (1): Input electrode (2): Ground electrode (3): Output electrode * No polarity. 0.70.3 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 2000 K 330mm Reel Embossed Tape 7500 : Electrode 0.70.3 0.650.2 Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) NFW31SP106X1E4p 10MHz NFW31SP206X1E4p 20MHz - NFW31SP506X1E4p 50MHz - - NFW31SP107X1E4p 100MHz - - - NFW31SP157X1E4p 150MHz - - - NFW31SP207X1E4p 200MHz - - NFW31SP307X1E4p 300MHz - - NFW31SP407X1E4p 400MHz - NFW31SP507X1E4p 500MHz - Rated Current: 200mA 6dB max. 5dB min. 25dB min. 25dB min. Rated Voltage: 25Vdc 6dB max. 5dB min. 25dB min. - 25dB min. - - - 25dB min. - - 30dB min. 30dB min. 30dB min. - - 30dB min. 30dB min. 6dB max. - 5dB min. - - 20dB min. 30dB min. - 6dB max. - - - - 6dB max. - - 10dB min. 30dB min. - - - - 6dB max. - 5dB min. 15dB min. - - - - - - 6dB max. - - - - - - - Operating Temperature Range: -40C to +85C 10dB min. 20dB min. 30dB min. 30dB min. Number of Circuit: 1 (50 - 50) 0 NFW31SP157X1E4 NFW31SP207X1E4 Insertion Loss (dB) NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 40 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 60 NFW31SP107X1E4 80 10 100 Frequency (MHz) 1000 2000 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 150 30dB min. 30dB min. - 6dB max. 10dB min. c Insertion Loss Characteristics 20 Block Type EMIFILr Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Cut-off at 10MHz at 20MHz at 50MHz at 100MHz at 150MHz at 200MHz at 300MHz at 400MHz at 500MHz at 1000MHz Frequency Part Number - 10dB min. 6dB max. 10dB min. NFW31 Series Measuring Circuit Example of EMI Suppression in an Actual Circuit EMI Suppression Filter 74ALS04 74ALS00 Chip Ferrite Bead EMI Suppression Effect Measuring Point 10MHz Type of Filter ( ) Signal Wave Form 20ns/div 1V/div / EMI Suppression Effect / Description 60 20 0 ) Signal Waveform 20ns/div 1V/div 400 100 200 300 Frequency (MHz) 500 Noise Spectrum (10:1 Active Probe) NFW31SP Series (Cut-off frequency 50MHz) Noise Level (dBV/m) 100 80 NFW31SP's steep attenuation characteristic means excellent EMI suppression without waveform cornering. Level before filter mounting 60 40 20 0 400 100 200 300 Frequency (MHz) 500 (NFM41CC 470pF) Noise Level (dBV/m) 100 Conventional Chip Solid Type EMI Filter 80 40 20 L C L: Chip Inductor C: Chip Capacitor (270pF) 100 Noise Level (dBV/m) L 3-terminal capacitors suppress signal frequencies as EMI frequencies so the signal waveform is distorted. Level before filter mounting 60 0 Filter Combined with Conventional LCs Chip Common Mode Choke Coil ( Signal Lines Type Chip EMIFILr 40 80 400 100 200 300 Frequency (MHz) 500 Level before filter mounting 60 40 20 0 400 100 200 300 Frequency (MHz) 500 Combinations of inductors and capacitors can yield a steep attenuation characteristic, but they require a great deal more mounting space. Moreover, at high frequencies the EMI suppression is less than that obtained by NFW31S. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 151 Block Type EMIFILr Signal Waveform and Noise Spectrum before Filter Mounting 80 Microwave Absorber Noise Level (dBV/m) 100 NFR Series Signal Lines Type Chip EMIFILr NFR21GD NFR21GD Series 0805/2012 (inch/mm) 3-terminal RC filter, dampens the noise current and returns back to ground. c Dimensions c Equivalent Circuit (Top View) Chip Ferrite Bead 0.50.2 1.0 max. (2) 0.950.35 2.00.2 1.250.2 No polarity. c Packaging (2) (3) 0.3+0.2 -0.25 (1) Chip EMIFILr Signal Lines Type GND 1.00.35 (Bottom View) Chip Common Mode Choke Coil Output (Input) (3) Input (Output) (1) (2) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 0.3+0.2 -0.25 : Electrode (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Rated Current Rated Voltage Insulation Resistance Operating (min.) Temperature Range Part Number Capacitance Resistance NFR21GD1002202p 10pF 20% 22ohm 30% 50mA 50Vdc 1000M ohm -40C to +85C NFR21GD1004702p 10pF 20% 47ohm 30% 35mA 50Vdc 1000M ohm -40C to +85C NFR21GD4702202p 47pF 20% 22ohm 30% 50mA 50Vdc 1000M ohm -40C to +85C NFR21GD4704702p 47pF 20% 47ohm 30% 35mA 50Vdc 1000M ohm -40C to +85C NFR21GD4706802p 47pF 20% 68ohm 30% 30mA 50Vdc 1000M ohm -40C to +85C NFR21GD4701012p 47pF 20% 100ohm 30% 25mA 50Vdc 1000M ohm -40C to +85C NFR21GD1012202p 100pF 20% 22ohm 30% 50mA 50Vdc 1000M ohm -40C to +85C NFR21GD1014702p 100pF 20% 47ohm 30% 35mA 50Vdc 1000M ohm -40C to +85C NFR21GD1016802p 100pF 20% 68ohm 30% 30mA 50Vdc 1000M ohm -40C to +85C NFR21GD1011012p 100pF 20% 100ohm 30% 25mA 50Vdc 1000M ohm -40C to +85C Number of Circuit: 1 c Insertion Loss Characteristics 0 (50 - 50) (50 - 50) 0 NFR21GD4701012 10 10 NFR21GD1004702 Insertion Loss (dB) Insertion Loss (dB) Block Type EMIFILr NFR21GD1002202 NFR21GD4702202 20 NFR21GD4704702 NFR21GD4706802 NFR21GD1012202 30 NFR21GD1014702 20 NFR21GD1011012 30 NFR21GD1016802 40 40 50 50 1 10 100 1 10 100 Frequency (MHz) Microwave Absorber Frequency (MHz) 1000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 152 1000 NFA Series Signal Lines Type Chip EMIFILr NFA31GD NFA31GD Series 1206/3216 (inch/mm) 3-terminal RC filter array. (9) c Equivalent Circuit (10) (7) (1) Input (Output) (8) (9) (10) (2) (2)GND (1)GND (3) (4) (6) 0.80.1 1.10.5 (3) 3.20.2 (5) (6) c Packaging 1.60.2 (Bottom View) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 100 : Electrode 0.05 min. (4) Output (Input) No polarity. 0.80.2 0.40.15 (5) 0.05 min. (in mm) Refer to pages from p.156 to p.162 for mounting information. c Rated Value (p: packaging code) Part Number Capacitance Resistance NFA31GD1006R84p 10pF 20% 6.8ohm 40% NFA31GD1004704p 10pF 20% 47ohm 30% NFA31GD1001014p 10pF 20% 100ohm 30% NFA31GD4706R84p 47pF 20% 6.8ohm 40% NFA31GD4703304p 47pF 20% NFA31GD4704704p Rated Current Rated Voltage 50mA Insulation Resistance Operating (min.) Temperature Range 6Vdc 1000M ohm -40C to +85C 20mA 6Vdc 1000M ohm -40C to +85C 15mA 6Vdc 1000M ohm -40C to +85C 50mA 6Vdc 1000M ohm -40C to +85C 33ohm 30% 20mA 6Vdc 1000M ohm -40C to +85C 47pF 20% 47ohm 30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD4701014p 47pF 20% 100ohm 30% 15mA 6Vdc 1000M ohm -40C to +85C NFA31GD1016R84p 100pF 20% 6.8ohm 40% 50mA 6Vdc 1000M ohm -40C to +85C NFA31GD1014704p 100pF 20% 47ohm 30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD1011014p 100pF 20% 100ohm 30% 15mA 6Vdc 1000M ohm -40C to +85C Number of Circuit: 4 c Insertion Loss Characteristics 0 10 (50 - 50) Chip Ferrite Bead (8) (50 - 50) 0 Signal Lines Type Chip EMIFILr (7) (Top View) Chip Common Mode Choke Coil c Dimensions 10 NFA31GD1006R84 NFA31GD1016R84 30 40 NFA31GD4704704 20 NFA31GD1014704 30 40 50 50 1 10 100 Frequency (MHz) 1000 3000 1 (50 - 50) 0 10 100 Frequency (MHz) 1000 3000 (50 - 50) 0 10 10 NFA31GD1001014 NFA31GD4701014 20 NFA31GD1011014 30 40 Microwave Absorber NFA31GD4703304 Insertion Loss (dB) Insertion Loss (dB) Block Type EMIFILr Insertion Loss (dB) Insertion Loss (dB) NFA31GD1004704 NFA31GD4706R84 20 20 30 40 50 50 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 153 Chip EMIFILr !Caution/Notice !Caution o Rating Chip Ferrite Bead Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o Soldering and Mounting 1. Self-heating Please provide special attention when mounting chip EMIFILr NFMppP/K series in close proximity to other products that radiate heat. The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component. 2. NFL15ST_X Series Mounting Direction Mount products in right direction, because products have a direction. Wrong direction which is 180 rotated from right direction cause fuming or partial dispersion, because input or output signal terminals short-circuit to ground. NC r Input q (Output) NC w eOutput (Input) Input e (Output) w GND r GND Correct Connection Wrong Connection Notice o Storage and Operating Conditions <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period Should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Chip Common Mode Choke Coil Chip EMIFILr !Caution/Notice Chip EMIFILr qOutput (Input) In case of mounting 0402 or smaller size of NFM on single-layered glass epoxy board, chip cracks will be also occurred because of the same reason. 4. Component Mounting: 0402 size or smaller of NFM If low bottom dead point of the pick-up nozzle is too low, chip cracks will be occurred because an extra power will be added to the chip during mounting. Therefore, the bottom dead point of pick-up nozzle must be set on/over the upper surface of the PCB. Adjusting is required when the bottom dead point will be set by correcting board warp. It is recommended that using the larger pick-up nozzle than chip length for avoiding what force impact will be centered to the middle point of components. Before assembling, please confirm its mounting accuracy under the best condition. Pick-up Nozzle Shape of Pick-up Nozzle o Notice (Soldering and Mounting) Microwave Absorber Block Type EMIFILr 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Points of Attention about NFM Pattern Forms The loaded stresses are different to a chip depend on PCB materials and structures. When the chip will be mounted on the metal PCB contained alumina material, PCB heat expansion/contraction will be a cause of chip cracks because the coefficients of thermal expressions are different between metal PCB and the chip itself. Good Poor Pick-up Nozzle Position in Component Placing Position Adjusting of Bottom Dead Point Longer Direction of Pick-up Nozzle 5. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. Continued on the following page. !Note 154 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip EMIFILr !Caution/Notice o Handling Chip EMIFILr Chip EMIFILr !Caution/Notice Twisting Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Bending Chip Ferrite Bead 1. Resin Coating Using resin for coating/molding products may affect the products performance. So please pay careful attention in selecting resin. Prior to use, please make the reliability evaluation with the product mounted in your application set. 2. Caution for Use (NFW Series) When you hold products with a tweezer, please hold by the sides. Sharp materials, such as a pair of tweezers or other material such as bristles of cleaning brush, should not touch the winding portion of this product to prevent breaking the wire. Mechanical shock should not be applied to the products mounted on the board to prevent breaking the core. 3. Handling of a Substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 155 NFp Soldering and Mounting Chip EMIFILr NFp series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As shown below, one side of the PCB is used for chip mounting, and the other is used for grounding. Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the high-frequency impedance of the grounding and maximizes the filter's performance. Land Pattern + Solder Resist Land Pattern Solder Resist (in mm) o Reflow Soldering NFA31CC/NFA31GD NFM15CC/NFM15PC o0.4 NFM18PS 0.4 0.6 1.0 2.2 Small diameter thru hole o0.2 0.4 0.1 1.2 1.5 0.6 Filled via o0.15 0.7 0.8 Pitch 3.8 0.75 0.25 Small diameter thru hole o0.2-o0.3 0.25 0.3 NFM18CC/NFM18PC 0.4 0.6 1.2 1.5 2.6 0.3 NFA31CC NFA31GD NFM15CC NFM15PC NFM18CC NFM18PC NFM18PS NFM21CC NFM21PC NFM21PS NFR21GD 0.4 1.0 2.2 Chipand EMIFILr Soldering Mounting Chip EMIFILr Chip Ferrite Bead 1. Standard Land Pattern Dimensions 1.3 4.2 0.05 0.8 1.2 2.0 R0.1 to R0.2 is preferred to obtain high voltage withstanding NFM21CC/NFM21PC/NFR21GD NFM21PS Small diameter thru hole o0.2-o0.3 0.4 0.6 0.85 1.25 1.85 2.35 2.3 0.6 0.8 1.9 Chip Common Mode Choke Coil Small diameter thru hole o0.4 0.6 1.4 2.6 0.8 1.2 1.6 1.8 2.6 o Reflow Soldering Chip mounting side NFM3DCC/NFM3DPC/NFM31PC/NFM41CC/NFM41PC Small diameter thru hole o0.4 Size (mm) Part Number a b c d e f NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4 NFM3DPC NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0 NFM41CC NFM41PC 1.5 2.0 3.5 6.0 1.2 2.6 3.0 NFM31KC*1 Small diameter thru hole o0.4 *1 For large current design, width of signal land pattern should be wider not less than 1mm per 1A (1mm/A). For example, in case of 10A, signal land pattern width should be 10mm or more. (1mm/A*10A=10mm) 0.6 1.2 2.6 3.0 10mm or more (in case of 10A) 1.0 1.4 2.5 4.4 Part Number g Size (mm) a b c d e f NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0 a b c d NFM41CC 1.5 2.0 3.5 6.0 1.2 2.6 3.0 NFM41PC NFM31KC*1 Small diameter thru hole o0.4 10mm or more (in case of 10A) *1 For large current design, width of signal land pattern should be wider not less than 1mm per 1A (1mm/A). For example, in case of 10A, signal land pattern width should be 10mm or more. (1mm/A*10A=10mm) 1.0 1.4 2.5 4.4 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 156 g NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4 NFM3DPC 0.6 1.2 2.6 3.0 Small diameter thru hole o0.4 a b c d Microwave Absorber o Flow Soldering Chip mounting side 0.6 e f g NFM3DCC NFM3DPC NFM31PC NFM31KC NFM41CC NFM41PC 0.6 e f g Block Type EMIFILr Please contact us if using thinner land pad than 18m. NFp Chip EMIFILr Soldering and Mounting Land Pattern + Solder Resist o Reflow Soldering NFL15ST e 0.25 0.70 1.30 Small diameter thru hole o0.2-o0.3 0.8 0.8 0.4 0.6 1.2 1.5 r w NFL18ST 1.2 0.25 0.25 q NFL18SP Small diameter thru hole o0.2-o0.3 0.4 Directional Marking 0.75 NFL15ST NFL18SP NFL18ST NFL21SP (in mm) 0.4 0.6 1.0 2.2 0.4 Filled Via o0.15 Chip Ferrite Bead Land Pattern Solder Resist 1.0 2.0 2.3 0.6 0.8 1.9 0.6 1.4 2.6 o Reflow Soldering NFW31SP NFE31PT Chip Common Mode Choke Coil 1.75 0.25 Filled via o0.1 0.5 1.3 2.0 2.35 2.5 0.25 0.25 0.25 0.25 0.35 0.5 NFA21SL Small diameter thru hole o0.2 0.275 0.175 1.375 0.225 0.4 0.175 0.05 0.5 NFA18SL/NFA18SD 1.2 0.5 NFA18SL NFA18SD NFA21SL Please contact us if using thinner land pad than 18m. Chip EMIFILr Soldering Mounting Chipand EMIFILr NFL21SP Small diameter thru hole o0.4 1.5 o Reflow and Flow NFW31SP o Reflow Soldering NFE31PT 1.0 2.6 3.0 Block Type EMIFILr Small diameter thru hole o0.4 0.6 1.2 2.2 4.2 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 157 NFp Chip EMIFILr Soldering and Mounting Land Pattern + Solder Resist Land Pattern Solder Resist o Reflow Soldering o Flow Soldering Small diameter thru hole o0.4 0.6 3.0 2.6 1.6 Small diameter thru hole o0.4 2.0 1.5 3.8 4.8 9.0 Chipand EMIFILr Soldering Mounting Chip EMIFILr 4.8 8.8 o PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. 1.2 3.2 3.6 Chip Ferrite Bead NFE61PT Products should be located in the sideways direction (Length: a<b) to the mechanical stress. a b Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Poor example !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 158 Good example (in mm) NFp Chip EMIFILr Soldering and Mounting When flow soldering the EMI suppression filter, apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. When reflow soldering the chip EMI suppression filter, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. Chip Ferrite Bead 2. Solder Paste Printing and Adhesive Application (in mm) Adhesive Application oGuideline of solder paste thickness: 100-150m: NFM15/18/21/3D/31, NFR 100-200m: NFM41 NFM3D/31/41 Series Apply 0.1mg for NFM41C/41 and 0.06mg for NFM3D/NFM31 of bonding agent at each chip. Do not cover electrodes. 0.4 0.25 0.3 0.75 0.6 1.2 NFM18CC/18PC NFM15CC/15PC 0.4 1.0 2.2 0.25 0.7 1.3 Bonding agent Coating position of bonding agent NFM21CC/21PC NFR21GD NFM18PS 0.8 1.2 2.0 0.8 1.9 Chip Common Mode Choke Coil 0.05 0.6 0.4 1.2 0.1 NFM15CC NFM15PC NFM18CC NFM18PC NFM18PS NFM21CC NFM21PC NFM21PS NFM3DCC NFM3DPC NFM31PC NFM31KC NFM41CC NFM41PC NFR21GD Solder Paste Printing 0.6 1.4 2.6 NFM3DCC/3DPC NFM31PC/31KC 1.0 2.5 3.9 1.0 2.6 1.2 2.6 0.6 NFM41CC/41PC 0.6 1.0 2.5 4.4 Block Type EMIFILr 0.8 1.2 1.6 1.8 2.6 0.8 2.0 0.4 0.6 0.85 1.25 1.85 0.6 NFM21PS Chip EMIFILr Soldering Mounting Chipand EMIFILr Series 1.5 3.5 5.5 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 159 NFp Chip EMIFILr Soldering and Mounting (in mm) Series Solder Paste Printing oGuideline of solder paste thickness: 100-200m: NFA31CC/31GD NFA31CC NFA31GD NFA31CC/31GD Chip Ferrite Bead 0.6 0.4 1.0 2.2 2.6 0.8 Pitch 0.3 oGuideline of solder paste thickness: 100-150m: NFL, NFA18SL/18SD/21SL 0.4 1.2 0.25 0.25 NFL18SP 0.75 NFL15ST 0.25 1.30 0.4 1.0 2.0 NFL18ST NFL21SP 0.6 0.6 1.2 0.70 Chip Common Mode Choke Coil 0.4 1.0 2.2 0.8 1.9 NFL15ST NFL18SP NFL18ST NFL21SP NFA18SL NFA18SD NFA21SL 0.4 0.6 1.4 2.6 NFA18SL/18SD NFA21SL 1.375 0.5 0.35 1.5 0.5 0.25 0.25 NFW31SP Series Apply 0.2mg of bonding agent at each chip. 2.6 0.6 oGuideline of solder paste thickness: 150-200m Bonding agent oGuideline of solder paste thickness: 150-200m Coating positon of bonding agent Apply 1.0mg of bonding agent at each chip. 1.6 2.6 1.2 3.2 0.6 Microwave Absorber 1.75 1.3 2.0 0.6 2.2 4.2 NFE61PT 0.75 0.05 1.0 Block Type EMIFILr NFW31SP NFE31PT 0.225 0.4 0.25 1.2 0.5 0.175 0.175 Chipand EMIFILr Soldering Mounting Chip EMIFILr Adhesive Application 1.5 4.8 8.8 Bonding agent !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 160 1.5 4.8 9.0 Bonding agent NFp Chip EMIFILr Soldering and Mounting 3. Standard Soldering Conditions Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. If using NFM series with Sn-Zn based solder, please contact Murata in advance. Chip Ferrite Bead Flux: o Use Rosin-based flux. In case of using RA type solder, products should be cleaned completely with no residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. (1) Soldering Methods Use flow and reflow soldering methods only. Use standard soldering conditions when soldering chip EMI suppression filters. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. For additional mounting methods, please contact Murata. t2 Heating T1 Limit Profile Standard Profile Time (s) Standard Profile Pre-heating Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) NFM3D/31/41 150C 60s min. 250C 4 to 6s NFE61PT 150C 60s min. 250C NFW31SP 150C 60s min. 250C oReflow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) Chip Common Mode Choke Coil Pre-heating t1 Series Chip EMIFILr Soldering Mounting Chipand EMIFILr T3 T2 Limit Profile Cycle of Flow Heating Cycle of Flow Temp. (T3) Time. (t2) 2 times max. 2653C 5s max. 2 times max. 4 to 6s 2 times max. 2653C 5s max. 2 times max. 4 to 6s 2 times max. 2653C 5s max. 1 time max. Temperature (C) T4 T2 T1 T3 Block Type EMIFILr oFlow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) Temperature (C) (2) Soldering Profile 180 150 Limit Profile Pre-heating t1 Standard Profile t2 Time (s) Standard Profile Series Limit Profile Peak Cycle Temperature of Reflow (T2) Time. (t1) Heating Temp. (T1) Heating Temp. (T3) Time. (t2) Peak Cycle Temperature of Reflow (T4) NFM NFA31CC/31GD, NFR 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 2 times max. NFA18S/21S (Except for NFA31CC/31GD) NFE, NFL 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 2 times max. NFW31SP 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 1 time max. Microwave Absorber 90s30s !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 161 Chip Ferrite Bead NFp Chip EMIFILr Soldering and Mounting (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating: 150C 60s min. Soldering iron power output / Tip diameter: 30W max. / o3mm max.*1 *1 NFM15: 30W max. / o2mm max. Temperature of soldering iron tip / Soldering time / Times: 350C max. / 3-4s / 2 times*2 *2 NFM15: 340C max. / 3-4s / 1 time NFE31PT152Z1E9: 280C max. / 10s max. / 2 times Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. Following conditions should be observed when cleaning chip EMI filter. (1) Cleaning Temperature: 60C max. (40C max. for alcohol type cleaner) (2) Ultrasonic Output: 20W/liter max. Duration: 5 minutes max. Frequency: 28 to 40kHz (3) Cleaning Agent The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production. (a) Alcohol cleaning agent Isopropyl alcohol (IPA) (b) Aqueous cleaning agent Pine Alpha ST-100S (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agent has been removed with deionized water. Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chipand EMIFILr Soldering Mounting Chip EMIFILr 4. Cleaning !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 162 NFp Packaging Chip EMIFILr (Paper Tape) o1.5 +0.1 -0 b 2.00.05 Direction of Feed Chip Ferrite Bead a 3.50.05 8.0 4.00.1 1.750.1 Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape c c: Total Thickness of Tape Minimum Qty. (pcs.) Dimensions Part Number NFL15ST o180mm Reel a b c d 1.12 0.62 0.8 max. - o330mm Reel Paper Tape Embossed Tape Paper Tape Embossed Tape 10000 - - - Bulk 500 (in mm) <Paper> <Embossed> c d c Direction of Feed c: Depth of Cavity (Embossed Tape) There are holes in the cavities of the NFM31, NFA18S and NFA21S_48 only. NFA18S: o0.80.1, NFA21S_48: o1.0 +0.2 -0 NFM31: o1.0 +0.2 -0 1 NFM31: 3.50.1 c: Total Thickness of Tape (Paper Tape) Dimension of the cavity of embossed tape is measured at the bottom side. Minimum Qty. (pcs.) o180mm Reel o330mm Reel Paper Tape Embossed Tape Paper Tape Embossed Tape Bulk a b c d NFM15CC/ NFM15PC (Except for474/105) 1.15 0.75 0.75 max. - 10000 - - - 500 NFM15PC474/105 1.15 0.65 0.6 max. - 10000 - - - 500 NFM18CC/ NFM18PC (Except for105R/225B1A) 1.85 NFM18PS 1.05 0.9 max. - 4000 - - - 500 NFM18PC105R/225B1A 1.1 max. - 4000 - - - 500 NFL18SP/NFL18ST_H 0.9 max. - 4000 - - - 1000 1.85 1.05 NFL21SP 2.3 1.55 1.1 max. NFM21CC/21PC/21PS 2.3 1.55 1.1 max. - 4000 - - - 500 NFM3DCC/3DPC 3.4 1.4 0.85 0.2 - 4000 - - 500 NFM31PC/31KC 3.5 1.9 1.5 0.25 - 3000 - - 500 1.1 max. NFA18SL/18SD 1.8 1.0 0.7 0.25 - 4000 - - 1000 NFA21SL_45 2.30 1.55 0.7 0.25 - 4000 - - 1000 NFA21SL_48 2.25 1.45 1.05 0.25 - 4000 - - 1000 NFA31GD/31CC 3.5 2.0 1.1 max. - 4000 - - - 100 NFE31PT 3.6 1.8 1.85 0.2 - 2000 - 8000 500 NFR21GD 2.3 1.55 0.7 0.25 - 4000 - - 500 NFW31SP 3.6 1.9 2.0 0.2 - 2000 - 7500 - Block Type EMIFILr Dimensions Part Number NFL18ST_X Chip Common Mode Choke Coil b (in mm) "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity." Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 163 Microwave Absorber a 1 3.50.05 8.0 2.00.05 4.00.1 4.00.1 o1.5 +0.1 -0 Chip EMIFILr Packaging Chip EMIFILr 1.750.1 (Common to Paper Tape / Embossed Tape) NFp Chip EMIFILr Packaging b c 0.3 Part Number 12.0 +0.1 o1.5 -0 5.50.05 a Chip Ferrite Bead 2.00.05 4.00.1 4.00.1 1.750.1 Minimum Quantity and Dimensions of 12mm Width Embossed Tape Dimensions Minimum Qty. (pcs.) a b c o180mm Reel o330mm Reel NFM41CC/41PC 4.8 1.8 1.1 4000 - Bulk 500 NFE61PT 7.2 1.9 1.75 2500 8000 500 Direction of Feed c: Depth of Cavity Dimension of the cavity is measured at the bottom side. Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Packaging Chip EMIFILr "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity." !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 164 (in mm) Chip EMIFILr Design Kits Chip Ferrite Bead NFp Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NFM15CC222D1A3 NFM15CC222D1C3 NFM15CC223C1A3 NFM15CC223C1C3 NFM18CC220U1C3 NFM18CC470U1C3 NFM18CC101R1C3 NFM18CC221R1C3 NFM18CC471R1C3 NFM18CC102R1C3 NFM18CC222R1C3 NFM18CC223R1C3 NFM21CC220U1H3 NFM21CC470U1H3 NFM21CC101U1H3 NFM21CC221R1H3 NFM21CC471R1H3 NFM21CC102R1H3 NFM21CC222R1H3 NFM21CC223R1H3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 2200pF20% 2200pF20% 22000pF20% 22000pF20% 22pF20% 47pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 22pF20% 47pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 10 16 10 16 16 16 16 16 16 16 16 16 50 50 50 50 50 50 50 50 1000 1000 1000 1000 400 400 500 500 500 600 700 1000 700 700 700 700 1000 1000 1000 2000 Chip Common Mode Choke Coil No. Chip EMIFILr Design Kits Chip EMIFILr oEKEMNFMCC-KIT (Chip EMIFILr Capacitor Type for Signal Lines) oEKEMFA31E-KIT (Chip EMIFILr Capacitor Array Type / RC Combined Array Type) No. Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 NFA31CC220S1E4 NFA31CC470S1E4 NFA31CC101S1E4 NFA31CC221S1E4 NFA31CC471R1E4 NFA31CC102R1E4 NFA31CC222R1E4 NFA31CC223R1C4 10 10 10 10 10 10 10 10 22pF20% 47pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 25 25 25 25 25 25 25 16 200 200 200 200 200 200 200 200 Part Number Quantity (pcs.) Cut-off Frequency Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 NFL15ST157X0J3 NFL15ST207X0J3 NFL15ST307X0J3 NFL15ST507X0J3 NFL18ST506H1A3 NFL18ST706H1A3 NFL18ST107H1A3 NFL18ST207H1A3 NFL18ST307H1A3 NFL18ST507H1A3 NFL18ST207X1C3 NFL18ST307X1C3 NFL18ST507X1C3 NFL18SP157X1A3 NFL18SP207X1A3 NFL18SP307X1A3 NFL18SP507X1A3 NFL21SP106X1C3 NFL21SP206X1C7 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 150MHz 200MHz 300MHz 500MHz 50MHz 70MHz 100MHz 200MHz 300MHz 500MHz 200MHz 300MHz 500MHz 150MHz 200MHz 300MHz 500MHz 10MHz 20MHz 6.3 6.3 6.3 6.3 10 10 10 10 10 10 16 16 16 10 10 10 10 16 16 50 50 50 50 75 75 75 100 100 100 150 200 200 100 100 100 100 100 100 Microwave Absorber No. Block Type EMIFILr oEKEMFL18AG-KIT (Chip EMIFILr LC Combined Type) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 165 Design Kits NFp Chip EMIFILr Continued from the preceding page. Part Number Quantity (pcs.) Cut-off Frequency Rated Voltage (Vdc) Rated Current (mA) 20 21 22 23 24 25 26 27 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 10 10 10 10 10 10 10 10 50MHz 70MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 16 16 16 16 16 16 16 16 150 150 200 200 250 300 300 300 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Design Kits Chip EMIFILr Chip Ferrite Bead No. No. Part Number 28 29 30 31 32 33 34 35 36 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 NFW31SP107X1E4 NFW31SP157X1E4 NFW31SP207X1E4 NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 Quantity Cut-off (pcs.) Frequency 10 10 10 10 10 10 10 10 10 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz Attenuation (dB min.) 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 30 6dB max. 25 25 25 5 6dB max. 30 25 25 5 6dB max. 30 30 10 6dB max. 20 5 6dB max. 30 20 10 6dB max. 10 6dB max. 5 6dB max. 6dB max. - 1GHz 30 30 30 30 30 30 15 10 10 Rated Rated Current Voltage 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 25V 25V 25V 25V 25V 25V 25V 25V 25V oEKEMFA20AH-KIT (Chip EMIFILr LC Combined Array Type) No. Part Number Quantity (pcs.) Cut-off Frequency Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 NFA18SL506X1A45 NFA18SL137V1A45 NFA18SL187V1A45 NFA18SL207V1A45 NFA18SL227V1A45 NFA18SL307V1A45 NFA18SL357V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SD187X1A45 NFA18SD207X1A45 NFA21SL506X1A48 NFA21SL806X1A48 NFA21SL207X1A45 NFA21SL207X1A48 NFA21SL307X1A45 NFA21SL307X1A48 NFA21SL287V1A45 NFA21SL287V1A48 NFA21SL317V1A45 NFA21SL317V1A48 NFA21SL337V1A45 NFA21SL337V1A48 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 50MHz 130MHz 180MHz 200MHz 220MHz 300MHz 350MHz 400MHz 480MHz 180MHz 200MHz 50MHz 80MHz 200MHz 200MHz 300MHz 300MHz 280MHz 280MHz 310MHz 310MHz 330MHz 330MHz 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 25 50 50 50 25 100 35 100 100 25 25 20 20 100 100 100 100 100 100 100 100 100 100 oEKEMNFMPAN-KIT (Chip EMIFILr for Large Current) No. Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (A) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 NFM15CC222D1A3 NFM15CC222D1C3 NFM15CC223C1A3 NFM15CC223C1C3 NFM15PC473C1A3 NFM15PC473C1C3 NFM15PC104D0J3 NFM15PC104R1A3 NFM15PC224D0J3 NFM15PC224R1A3 NFM15PC474D0G3 NFM15PC474R0J3 NFM15PC105R0G3 NFM15PC435R0E3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 2200pF20% 2200pF20% 22000pF20% 22000pF20% 0.047F20% 0.047F20% 0.1F20% 0.1F20% 0.22F20% 0.22F20% 0.47F20% 0.47F20% 1F20% 4.3F20% 10 16 10 16 10 16 6.3 10 6.3 10 4 6.3 4 2.5 1 1 1 1 1 1 2 2 2 2 2 2 2 2 Continued on the following page. !Note 166 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. NFp Chip EMIFILr Design Kits Capacitance Rated Voltage (Vdc) Rated Current (A) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 NFM18PC104R1C3 NFM18PC224R0J3 NFM18PC474R0J3 NFM18PC105R0J3 NFM18PC225B0J3 NFM18PC225B1A3 NFM18PS474R0J3 NFM18PS105R0J3 NFM18PS105D0J3 NFM21PC104R1E3 NFM21PC224R1C3 NFM21PC474R1C3 NFM21PC105B1A3 NFM21PC105B1C3 NFM21PC225B0J3 NFM21PC475B1A3 NFM21PS106B0J3 NFM31PC276B0J3 NFM41PC204F1H3 NFM41PC155B1E3 NFM31KC103R1H3 NFM31KC103R2A3 NFM31KC153R1H3 NFM31KC153R2A3 NFM31KC223R1H3 NFM31KC223R2A3 NFM31KC104R1H3 NFM31KC104R2A3 NFE31PT152Z1E9 NFE31PT222Z1E9 NFE61PT102E1H9 NFE61PT472C1H9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.1F20% 0.22F20% 0.47F20% 1F20% 2.2F20% 2.2F20% 0.47F20% 1F20% 1F20% 0.1F20% 0.22F20% 0.47F20% 1F20% 1F20% 2.2F20% 4.7F20% 10F20% 27F20% 0.2F+80/-20% 1.5F20% 10000pF20% 10000pF20% 15000pF20% 15000pF20% 22000pF20% 22000pF20% 100000pF20% 100000pF20% 1500pF+50/-20% 2200pF50% 1000pF+80/-20% 4700pF+80/-20% 16 6.3 6.3 6.3 6.3 10 6.3 6.3 6.3 25 16 16 10 16 6.3 10 6.3 6.3 50 25 50 100 50 100 50 100 50 100 25 25 50 50 2 2 2 4 2 4 2 2 2 2 2 2 4 4 4 6 4 6 2 6 10 10 10 10 10 10 6 6 6 6 2 2 Chip EMIFILr Design Kits Chip EMIFILr Quantity (pcs.) Chip Common Mode Choke Coil Part Number Microwave Absorber Block Type EMIFILr No. Chip Ferrite Bead Continued from the preceding page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 167 Memo !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 168 Chip Ferrite Bead DL p/PLp 170 Part Numbering 172 Series Line Up 174 Product Detail 177 !Caution/Notice 203 Soldering and Mounting 205 Packaging 212 Design Kits 214 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Series Introduction Chip EMIFILr Chip Common Mode Choke Coil Large Current Common Mode Choke Coil for Automotive Available !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. DLp Series Introduction Chip Ferrite Bead Common Mode Current Magnetic flux caused by common mode current accumulates and works as an inductor. Magnetic flux caused by differential mode current cancel each other and does not work as an inductor. Differential Mode Current Features, Classification Chip EMIFILr Category Chip Common Mode Choke Coil Ultra high cut-off frequency for high speed differential signal lines Structure ( ) High cut-off frequency for high speed differential signal lines * Low profile, small size, suitable for mobile equipment. * Tight terminal pitch enables high density layout. * Ultra high cut-off frequency and its matching to line impedance enables good transmission of high speed signal. DLW21SN_HQ2 DLW21HN_HQ2 * Ultra high self-resonance frequency enables high cut-off frequency. * Its matching to line impedance enables good transmission of high speed signal. Multilayer type DLM11SN * Enables noise suppression for differential signal line without distortion in high-speed signal transmission. Film type DLP0QSN DLP0NS DLP11SN DLP11RN DLP2AD * Low profile, small size, suitable for mobile equipment. * Tight terminal pitch enables high density layout. * High cut-off frequency enables good transmission of high speed signal. DLW21SN_SQ2 DLW31S DLW21HN_SQ2 * Ultra high self-resonance frequency enables high cut-off frequency. * DLW21H is designed as low profile. DLP31S DLP31D * Low profile,small size, suitable for mobile equipment. * Tight terminal pitch enables high density layout. Film type Block Type EMIFILr Wound type For general differential signal lines Comments DLP0QSA DLP0NSA DLP11SA DLP11RB DLP11TB DLP2ADA Wound type High cut-off frequency High Coupling For high speed differential signal lines Part Number Film type DLW5AH Large current High coupling (For power lines) Wound type DLW5BS DLW5AT * Large current (6A max.), suitable for input connector from an AC adaptor. * DLW5AT/DLW5BT is designed as low profile. Microwave Absorber DLW5BT Relative high differential mode impedance Low coupling (For audio lines) Large current Automotive Available (For power lines) Available up to 18A Multilayer type DLM11G * Modified differential mode impedance is higher than other common mode choke coils; this feature makes it possible to suppress both common mode and differential mode noise. * Ideal to keep low distortion audio signal. Winding type Cased structure PLT10HH * Large current, high reliability, suitable for motors in automobiles. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 170 Noise Suppression DLP/DLW Series Example Mechanism of Skew Improvement Skew Improvement Effect of Common Mode Choke Coil Waveform rises (or falls) Waveform is equivalent to 1000Mbps signal Chip Ferrite Bead Example of Skew Improvement by Common Mode Choke Coil (Tested using pulse generator waveform) Current change generates magnetic flux on a ferrite core Waveform with intentionally made skew (skew: 100ps) Skew is improved by common mode choke coil Electromotive force is generated on another line Chip EMIFILr This electromotive force works to decrease the delay of the waveform Noise Suppression of Common Mode Choke Coil in HDMI Line 60 55 55 50 45 40 35 Without filter DLW21SN900HQ2 25 20 1000 1500 2000 2500 3000 3500 4000 4500 50 45 40 35 30 Without filter DLP11SA900HL2 25 20 1000 5000 1500 2000 Frequency (MHz) Test Example of HDMI1.3 Waveform Transmission 2500 3000 3500 4000 4500 5000 Frequency (MHz) ESD protection device only Film Type DLP11SN900HL2 (Cut-off frequency is lowest in the table below) ~Using ESD protection device LXES15AAA1-100 (0.05pF)~ Block Type EMIFILr 30 Chip Common Mode Choke Coil 60 Noise Level (dBV/m) Noise Level (dBV/m) Device under test / Transmitter : game machine / Receiver : projector / Cable : HDMI categoly 2 3m cable Test resolution / 1080p Deep color 12bit (Data 1.11GHz) DVD play mode Signal frequency : 1.11GHz (Deep color 12bit) Specification satisfied Video signal generator CLOCK Film Type DLP11SA900HL2 Film Type Array DLP2ADN900HL4 Over 10GHz Around 6GHz Around 4GHz Specification satisfied Specification satisfied Specification satisfied Rise time: 83.4ps Fall time: 77.4ps Rise time: 90.4ps Fall time: 85.5ps Rise time: 100ps Fall time: 97.4ps Microwave Absorber Wound Type DLW21SN900HQ2 DATA common mode choke coil ESD protection device 0.05pF Cut-off Frequency Judge Transition Time Each common mode choke coil can keep the waveform and satisfy the specification. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 171 DL p Chip Ferrite Bead (Part Number) Chip Common Mode Choke Coil DL W 21 S N q w e r t 371 S Q 2 L u i o !0 y qProduct ID tCategory Code Product ID DL Part Numbering Chip Common Mode Choke Coils Category A B Chip EMIFILr wStructure C Code Structure H W Wire Wound Type M M Multilayer Type N P Film Type R eDimensions (LgW) Dimensions (LgW) EIA 0Q 0.65g0.5mm 025020 0N 0.85g0.65mm 03025 11 1.25g1.0mm 0504 1N 1.5g0.65mm 05025 Chip Common Mode Choke Coil Code Expressed by a letter. yImpedance Typical impedance at 100MHz is expressed by three figures. The unit is in ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. yInductance (DLW43SH) Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. 21 2.0g1.2mm 0805 2A 2.0g1.0mm 0804 31 3.2g1.6mm 1206 43 4.5g3.2mm 1812 5A 5.0g3.6mm 2014 S 5B 5.0g5.0mm 2020 M uCircuit Code Circuit H Block Type EMIFILr rFeatures (1) Expressed by a letter. U Code Type T S Magnetically Shielded One Circuit Type X D Magnetically Shielded Two Circuit Type iFeatures (2) H Open Magnetic One Circuit Type G Magnetically Shielded Audio Type Code R/T One Circuit Low Profile Type D Features K P Expressed by a letter. L Q Y oNumber of Signal Lines Microwave Absorber Code Number of Signal Lines 2 Two Lines 4 Four Lines !0Packaging Code Packaging K Embossed Taping (o330mm Reel) DLW5AH/DLW5BS/DLW5BT Series L Embossed Taping (o180mm Reel) All Series B Bulk All Series D Paper Taping (o180mm Reel) DLP0QS/DLM11G !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 172 PL p Part Numbering T 10H H 102 6R0 P N B e r t y u i o qProduct ID Product ID PL Common Mode Choke Coils wType Code Type T DC Type eApplications Code Applications 10H for DC Line High-frequency Type rFeatures Code Features H for Automotive Chip Ferrite Bead q w tImpedance Expressed by three figures. The unit is ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. yRated Current Expressed by three figures. The unit is ampere (A). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. A decimal point is expressed by the capital letter "R." In this case, all figures are significant digits. Chip EMIFILr PL uWinding Mode Code Winding Mode P Aligned Winding Type iLead Dimensions Code Lead Dimensions N No Lead Terminal (SMD) Chip Common Mode Choke Coil (Part Number) Common Mode Choke Coil oPackaging Packaging B Bulk PLT10H Series L Embossed Taping (o178mm/o180mm Reel) PLT10H K Embossed Taping (o330mm Reel) PLT10H Microwave Absorber Block Type EMIFILr Code !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 173 DL p Chip Common Mode Choke Coil Type Size Code Thickness in inch (in mm) (mm) Multilayer Type for Audio Lines 0504(1210) p184 p185 Multilayer Type for Differential Signal Lines 0504(1210) Chip Ferrite Bead p186 025020(0605) p187 03025(0806) p189 Chip EMIFILr Film Type for Differential Signal Lines 0504(1210) Block Type EMIFILr Chip Common Mode Choke Coil p190 p191 p192 1206(3216) p193 05025(1506) p194 Film Array Type for Differential Signal Lines 0804(2010) p196 1206(3216) Microwave Absorber p197 0805(2012) Wire Wound Type for Differential Signal Lines p198 0.5 0.5 0.5 0.3 0.3 0.3 0.3 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.5 0.5 0.5 0.3 1.15 1.15 1.15 0.45 0.45 0.45 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 1.15 1.15 1.15 1.15 1.15 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 Part Number DLM11GN601SD2 DLM11SN450HY2 DLM11SN900HY2 DLP0QSN600HL2 DLP0QSA070HL2 DLP0QSA150HL2 DLP0QSA350HL2 DLP0NSC280HL2 DLP0NSN350HL2 DLP0NSN670HL2 DLP0NSN900HL2 DLP0NSN121HL2 DLP0NSA070HL2 DLP0NSA150HL2 DLP11SN670SL2 DLP11SN121SL2 DLP11SN161SL2 DLP11SN900HL2 DLP11SN201HL2 DLP11SN241HL2 DLP11SN281HL2 DLP11SN331HL2 DLP11SA350HL2 DLP11SA670HL2 DLP11SA900HL2 DLP11RN450UL2 DLP11RB150UL2 DLP11RB400UL2 DLP11TB800UL2 DLP31SN121ML2 DLP31SN221ML2 DLP31SN551ML2 DLP1NDN350HL4 DLP1NDN670HL4 DLP1NDN900HL4 DLP2ADA350HL4 DLP2ADA670HL4 DLP2ADA900HL4 DLP2ADN670HL4 DLP2ADN900HL4 DLP2ADN121HL4 DLP2ADN161HL4 DLP2ADN201HL4 DLP2ADN241HL4 DLP2ADN281HL4 DLP31DN900ML4 DLP31DN131ML4 DLP31DN201ML4 DLP31DN321ML4 DLP31DN441ML4 DLW21SN670SQ2 DLW21SN900SQ2 DLW21SN121SQ2 DLW21SN181SQ2 DLW21SN261SQ2 DLW21SN371SQ2 DLW21SN501SK2 DLW21SN670HQ2 DLW21SN900HQ2 DLW21SN121HQ2 DLW21SN181XQ2 DLW21SN261XQ2 Series Line Up Common Mode Impedance Rated Current (at 100MHz/20C) 600ohm25% 45ohm25% 90ohm25% 60ohm25% 7ohm2ohm 15ohm5ohm 35ohm10ohm 28ohm20% 35ohm10ohm 67ohm20% 90ohm20% 120ohm20% 7ohm2ohm 15ohm5ohm 67ohm20% 120ohm20% 160ohm20% 90ohm20% 200ohm20% 240ohm20% 280ohm20% 330ohm20% 35ohm20% 67ohm20% 90ohm20% 45ohm25% 15ohm5ohm 40ohm10ohm 80ohm25% 120ohm20% 220ohm20% 550ohm20% 35ohm20% 67ohm20% 90ohm20% 35ohm20% 67ohm20% 90ohm20% 67ohm20% 90ohm20% 120ohm20% 160ohm20% 200ohm20% 240ohm20% 280ohm20% 90ohm20% 130ohm20% 200ohm20% 320ohm20% 440ohm20% 67ohm25% 90ohm25% 120ohm25% 180ohm25% 260ohm25% 370ohm25% 500ohm25% 67ohm25% 90ohm25% 120ohm25% 180ohm25% 260ohm25% 100mA 100mA 100mA 50mA 100mA 100mA 100mA 100mA 100mA 110mA 100mA 90mA 100mA 100mA 180mA 140mA 120mA 150mA 110mA 100mA 90mA 80mA 170mA 150mA 150mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 80mA 60mA 150mA 130mA 120mA 140mA 130mA 120mA 100mA 90mA 80mA 80mA 160mA 120mA 100mA 80mA 70mA 400mA 330mA 370mA 330mA 300mA 280mA 250mA 320mA 280mA 280mA 240mA 220mA Continued on the following page. !Note 174 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. DLp Chip Common Mode Choke Coil Series Line Up p199 0805(2012) p200 1206(3216) p201 Wire Wound Type for Differential Signal Lines 1812(4532) Automotive Type p177 p179 p182 2014(5036) Wire Wound Type for Power Lines and Signal Lines p177 p179 2020(5050) DLW21SN491XQ2 DLW21SR670HQ2 DLW21HN670SQ2 DLW21HN900SQ2 DLW21HN121SQ2 DLW21HN181SQ2 DLW21HN670HQ2 DLW21HN900HQ2 DLW21HN121HQ2 DLW31SN900SQ2 DLW31SN161SQ2 DLW31SN261SQ2 DLW31SN601SQ2 DLW31SN102SQ2 DLW31SN222SQ2 DLW43SH110XK2 DLW43SH220XK2 DLW43SH510XK2 DLW43SH101XK2 DLW43SH101XP2 DLW5AHN402SQ2 DLW5ATN111SQ2 DLW5ATN401SQ2 DLW5ATN501SQ2 DLW5ATN851SQ2 DLW5ATN272SQ2 DLW5ATN500MQ2 DLW5ATN151MQ2 DLW5ATN331MQ2 DLW5ATN501MQ2 DLW5ATN112MQ2 DLW5ATN111TQ2 DLW5ATN231TQ2 DLW5ATN401TQ2 DLW5ATN501TQ2 DLW5BSM501TQ2 DLW5BSM601TQ2 DLW5BSM801TQ2 DLW5BSM191SQ2 DLW5BSM351SQ2 DLW5BSM102SQ2 DLW5BSM152SQ2 DLW5BSM302SQ2 DLW5BTM101SQ2 DLW5BTM251SQ2 DLW5BTM501SQ2 DLW5BTM102SQ2 DLW5BTM142SQ2 DLW5BTM101TQ2 DLW5BTM251TQ2 DLW5BTM501TQ2 DLW5BTM102TQ2 DLW5BTM142TQ2 490ohm25% 67ohm25% 67ohm25% 90ohm25% 120ohm25% 180ohm25% 67ohm25% 90ohm25% 120ohm25% 90ohm25% 160ohm25% 260ohm25% 600ohm25% 1000ohm25% 2200ohm25% 4000ohm (Typ.) 110ohm (Typ.) 400ohm (Typ.) 500ohm (Typ.) 850ohm (Typ.) 2700ohm (Typ.) 50ohm (Typ.) 150ohm (Typ.) 330ohm (Typ.) 500ohm (Typ.) 1100ohm (Typ.) 100ohm (Typ.) 230ohm (Typ.) 400ohm (Typ.) 500ohm (Typ.) 500ohm (Typ.) 600ohm (Typ.) 800ohm (Typ.) 190ohm (Typ.) 350ohm (Typ.) 1000ohm (Typ.) 1500ohm (Typ.) 3000ohm (Typ.) 100ohm (Typ.) 250ohm (Typ.) 500ohm (Typ.) 1000ohm (Typ.) 1400ohm (Typ.) 100ohm (Typ.) 250ohm (Typ.) 500ohm (Typ.) 1000ohm (Typ.) 1400ohm (Typ.) 190mA 400mA 330mA 330mA 280mA 250mA 240mA 220mA 200mA 370mA 340mA 310mA 260mA 230mA 200mA 360mA 310mA 230mA 200mA 170mA 200mA 5000mA 2000mA 1500mA 1500mA 1000mA 6000mA 5000mA 4000mA 2500mA 2000mA 5000mA 4000mA 2500mA 2000mA 1000mA 1400mA 2000mA 5000mA 2000mA 1500mA 1000mA 500mA 6000mA 5000mA 4000mA 2000mA 1500mA 6000mA 5000mA 4000mA 2500mA 2000mA Microwave Absorber p182 1.2 1.2 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.9 1.9 1.9 1.9 1.9 1.9 2.6 2.6 2.6 2.6 2.7 4.3 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 Chip Ferrite Bead p197 Common Mode Impedance Rated Current (at 100MHz/20C) Chip EMIFILr p198 Part Number Chip Common Mode Choke Coil Wire Wound Type for Differential Signal Lines Size Code Thickness in inch (in mm) (mm) Block Type EMIFILr Type !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 175 PL p Type Large Current Common Mode Choke Coil for Automotive Available Size Thickness in inch (in mm) (mm) p202 PLT10HH450180PN PLT10HH101150PN PLT10HH401100PN PLT10HH501100PN PLT10HH9016R0PN PLT10HH1026R0PN Common Mode Impedance Rated Current (at 10MHz/20C) 45ohm (Typ.) 100ohm (Typ.) 400ohm (Typ.) 500ohm (Typ.) 900ohm (Typ.) 1000ohm (Typ.) 18A 15A 10A 10A 6A 6A Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Chip Ferrite Bead Large Current Common Mode Choke Coil (12.9x6.6) for Automotive Available 9.4 9.4 9.4 9.4 9.4 9.4 Part Number !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 176 Series Line Up DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AH/DLW5BS DLW5AH/DLW5BS 2014/5036 (inch/mm) Series 2020/5050 (inch/mm) 5A max., common mode choke coil for power lines. c Dimensions c Equivalent Circuit (1) 0.5 min. (1) No polarity. (2) 1.7 1.3 1.7 0.3 0.3 0.3 position of wiring should * Starting be covered with resin. (4) c Packaging Code Packaging : Electrode (3) 1.3 0.9 1.3 0.3 0.3 0.3 (in mm) c Dimensions 3.00.5 DLW5BS (3) (4) (L) 5.00.3 Minimum Quantity L 180mm Reel Embossed Tape 400 K 330mm Reel Embossed Tape 1500 B Bulk(Bag) 100 c Equivalent Circuit (1) Chip EMIFILr (W) 3.60.3 Chip Ferrite Bead 0.45 min. * * (2) (T) 4.3 max. DLW5AH (2) 0.50.3 (Top) (3) (4) 1.30.3 (4) 1.30.3 (Bottom) c Packaging (T) 4.5 max. 0.5 min. (L) 5.00.3 Code Packaging : Marking : Electrode (3) 1.30.3 0.90.3 Minimum Quantity L 180mm Reel Embossed Tape 400 K 330mm Reel Embossed Tape 1500 B Bulk(Bag) 100 (in mm) Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Common Mode Impedance Common Mode Impedance Rated (at 10MHz/20C) (at 100MHz/20C) Current Rated Insulation Resistance Voltage (min.) Withstand Voltage DC Resistance DLW5AHN402SQ2p - 4000ohm (Typ.) 200mA 50Vdc 10M ohm 125Vdc 3.0ohm max. DLW5BSM501TQ2p 2800ohm 40% 500ohm (Typ.) 1000mA 50Vdc 10M ohm 125Vdc 0.23ohm max. DLW5BSM601TQ2p 1200ohm 40% 600ohm (Typ.) 1400mA 50Vdc 10M ohm 125Vdc 0.12ohm max. 0.056ohm max. DLW5BSM801TQ2p 550ohm 40% 800ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc DLW5BSM191SQ2p - 190ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.02ohm max. DLW5BSM351SQ2p - 350ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.04ohm max. DLW5BSM102SQ2p - 1000ohm (Typ.) 1500mA 50Vdc 10M ohm 125Vdc 0.06ohm max. DLW5BSM152SQ2p - 1500ohm (Typ.) 1000mA 50Vdc 10M ohm 125Vdc 0.1ohm max. DLW5BSM302SQ2p - 3000ohm (Typ.) 500mA 50Vdc 10M ohm 125Vdc 0.3ohm max. Operating Temperature Range: -25C to +85C (DLW5AH), -40C to +105C (DLW5BS_TQ2), -40C to +85C (DLW5BS_SQ2) Block Type EMIFILr Part Number Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil 1.70.3 1.70.3 3.60.3 (W) 5.00.3 (1) (2) 0.45 min. No polarity. Number of Circuit: 1 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 177 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AH Series 2014/5036 (inch/mm) / DLW5BS Series 2020/5050 (inch/mm) DLW5AH/DLW5BS c Impedance-Frequency Characteristics DLW5AH_SQ2/DLW5BS_SQ2 Series DLW5BS_TQ2 Series 100000 10000 1000 10000 DLW5AHN402SQ2 DLW5BSM302SQ2 DLW5BSM152SQ2 DLW5BSM102SQ2 DLW5BSM351SQ2 DLW5BSM191SQ2 1000 Impedance () Impedance () Chip Ferrite Bead Common mode Common mode DLW5BSM501TQ2 100 DLW5BSM601TQ2 DLW5BSM801TQ2 10 DLW5BSM501TQ2 100 DLW5BSM601TQ2 1 DLW5AHN402SQ2 DLW5BSM302SQ2 DLW5BSM152SQ2 Differential mode DLW5BSM102SQ2 DLW5BSM351SQ2 DLW5BSM191SQ2 DLW5BSM801TQ2 Differential mode 0.1 10 1 10 100 1000 1 10 Frequency (MHz) c Notice (Rating) In operating temperature exceeding +75C, derating of current is necessary for DLW5BSM191SQ2. Please apply the derating curve shown in chart according to the operating temperature. In operating temperature exceeding +65C, derating of current is necessary for DLW5BS_TQ2 series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Derating of Rated Current 2500 5 Rated Current (mA) Rated Current (A) DLW5BSM191SQ2 4.75 4.5 2000 DLW5BSM801TQ2 1500 1400 1000 DLW5BSM601TQ2 DLW5BSM501TQ2 500 0 0 10 20 30 40 50 60 70 80 90 100 75C 85C 0 20 40 65 60 80 105 100 120 Operating Temperature (C) Operating Temperature (C) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Universal Type [Power Lines/Signal Lines] Chip EMIFILr Frequency (MHz) 100 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 178 1000 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AT/DLW5BT DLW5AT/DLW5BT 2014/5036 (inch/mm) Series 2020/5050 (inch/mm) Low profile wire-wound common choke coil for power lines. c Equivalent Circuit 1.70.3 1.30.3 (1) (L) 5.00.3 0.45 min. 0.5 min. (W) 3.60.3 (2) (T) 2.200.15 (1) (3) (4) No polarity. c Packaging Packaging (4) (3) : Electrode 1.30.3 0.90.3 (in mm) c Dimensions L 180mm Reel Embossed Tape 700 K 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 c Equivalent Circuit 3.00.5 Minimum Quantity (1) Chip EMIFILr Code 1.70.3 1.30.3 DLW5BT (2) Chip Ferrite Bead c Dimensions DLW5AT (2) 0.50.3 (Top) (3) (4) 1.30.3 (4) (2) (3) 1.30.3 (1) 0.45 min. 0.5 min. (L) 5.00.3 (Bottom) 1.30.3 0.90.3 c Packaging Code Packaging : Marking : Electrode Minimum Quantity L 180mm Reel Embossed Tape 700 K 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 (in mm) Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLW5ATN111SQ2p 110ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.020ohm max. DLW5ATN401SQ2p 400ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.034ohm max. DLW5ATN501SQ2p 500ohm (Typ.) 1500mA 50Vdc 10M ohm 125Vdc 0.056ohm max. DLW5ATN851SQ2p 850ohm (Typ.) 1500mA 50Vdc 10M ohm 125Vdc 0.073ohm max. DLW5ATN272SQ2p 2700ohm (Typ.) 1000mA 50Vdc 10M ohm 125Vdc 0.12ohm max. DLW5BTM101SQ2p 100ohm (Typ.) 6000mA 50Vdc 10M ohm 125Vdc 0.013ohm max. DLW5BTM251SQ2p 250ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.020ohm max. DLW5BTM501SQ2p 500ohm (Typ.) 4000mA 50Vdc 10M ohm 125Vdc 0.027ohm max. DC Resistance DLW5BTM102SQ2p 1000ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.034ohm max. DLW5BTM142SQ2p 1400ohm (Typ.) 1500mA 50Vdc 10M ohm 125Vdc 0.056ohm max. Operating Temperature Range: -40C to +85C Block Type EMIFILr Insulation Resistance Withstand (min.) Voltage Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil 1.70.3 1.70.3 3.60.3 (W) 5.00.3 (T) 2.350.15 No polarity. Number of Circuit: 1 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 179 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AT Series 2014/5036 (inch/mm) / DLW5BT Series 2020/5050 (inch/mm) DLW5AT/DLW5BT c Impedance-Frequency Characteristics DLW5AT Series DLW5BT Series 10000 10000 Common mode DLW5BTM142SQ2 DLW5ATN272SQ2 DLW5ATN851SQ2 DLW5ATN501SQ2 DLW5ATN401SQ2 DLW5ATN111SQ2 100 DLW5BTM102SQ2 1000 DLW5BTM501SQ2 10 DLW5ATN272SQ2 DLW5ATN851SQ2 DLW5ATN501SQ2 DLW5ATN401SQ2 DLW5ATN111SQ2 1 Impedance () 1000 Impedance () Chip Ferrite Bead Common mode 1 10 100 100 DLW5BTM101SQ2 10 Differential mode 0.1 DLW5BTM251SQ2 DLW5BTM101SQ2 DLW5BTM251SQ2 DLW5BTM501SQ2 DLW5BTM102SQ2 DLW5BTM142SQ2 Differential mode 1 1 1000 10 100 1000 Frequency (MHz) c Notice (Rating) In operating temperature exceeding +60C, derating of current is necessary for DLW5AT series. Please apply the derating curve shown in chart according to the operating temperature. In operating temperature exceeding +60C, derating of current is necessary for the following part name of DLW5BT series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Derating of Rated Current 7000 6000 DLW5ATN111SQ2 5000 Rated Current (mA) Rated Current (mA) 6000 4000 3000 DLW5ATN401SQ2 DLW5ATN501SQ2 2000 1500 1000 5000 4750 4000 3400 3000 DLW5BTM101SQ2 DLW5BTM251SQ2 DLW5BTM501SQ2 2000 1000 0 0 10 20 30 40 50 60 70 85 80 90 Operating Temperature (C) 0 0 20 40 60 65 80 85 Operating Temperature (C) 2000 Rated Current (mA) Block Type EMIFILr Chip Common Mode Choke Coil Universal Type [Power Lines/Signal Lines] Chip EMIFILr Frequency (MHz) DLW5ATN851SQ2 1500 1300 DLW5ATN272SQ2 1000 900 500 0 0 10 20 30 40 50 60 75 85 70 80 90 Microwave Absorber Operating Temperature (C) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 180 100 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AT/DLW5BT DLW5AT/DLW5BT Series (105degreeC available type) Low profile wire-wound common choke coil for power lines. (105degreeC available type) 0.5 min. 1.30.3 1.70.3 (W) 3.60.3 (1) (L) 5.00.3 0.45 min. (1) (2) No polarity. Packaging (3) : Electrode 1.30.3 (in mm) c Dimensions 0.45 min. (L) 5.00.3 (2) (T) 2.200.15 1.70.3 1.30.3 180mm Reel Embossed Tape 700 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 (1) 0.5 min. (1) L K c Equivalent Circuit (W) 3.60.3 Minimum Quantity Chip EMIFILr Code 1.70.3 (4) 0.90.3 (2) (3) (4) No polarity. c Packaging Code Packaging 1.70.3 1.30.3 (4) (3) : Electrode 1.30.3 0.90.3 DLW5BT_TQ2 (3) (4) c Packaging 1.30.3 DLW5AT_TQ2 (2) Chip Ferrite Bead c Equivalent Circuit (in mm) c Dimensions L 180mm Reel Embossed Tape 700 K 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 c Equivalent Circuit 3.00.5 Minimum Quantity (1) (2) 0.50.3 (Top) Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil c Dimensions (T) 2.200.15 DLW5AT_MQ2 (3) (4) 1.70.3 1.30.3 (4) (2) (3) 1.30.3 (1) (Bottom) 1.30.3 0.90.3 c Packaging Code Packaging : Marking : Electrode Minimum Quantity L 180mm Reel Embossed Tape 700 K 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 Block Type EMIFILr 0.5 min. (L) 5.00.3 0.45 min. 1.70.3 3.60.3 (W) 5.00.3 (T) 2.350.15 No polarity. (in mm) Refer to pages from p.205 to p.209 for mounting information. Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 181 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AT/DLW5BT Series (105degreeC available type) DLW5AT/DLW5BT c Rated Value (p: packaging code) Chip Ferrite Bead Chip EMIFILr Insulation Resistance (min.) Common Mode Impedance Rated Rated (at 100MHz/20C) Current Voltage Part Number Withstand DC Resistance Voltage DLW5ATN500MQ2p 50ohm (Typ.) 6000mA 50Vdc 10M ohm 125Vdc 0.013ohm max. DLW5ATN151MQ2p 150ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.020ohm max. DLW5ATN331MQ2p 330ohm (Typ.) 4000mA 50Vdc 10M ohm 125Vdc 0.027ohm max. DLW5ATN501MQ2p 500ohm (Typ.) 2500mA 50Vdc 10M ohm 125Vdc 0.034ohm max. DLW5ATN112MQ2p 1100ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.056ohm max. DLW5ATN111TQ2p 110ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.020ohm max. DLW5ATN231TQ2p 230ohm (Typ.) 4000mA 50Vdc 10M ohm 125Vdc 0.027ohm max. DLW5ATN401TQ2p 400ohm (Typ.) 2500mA 50Vdc 10M ohm 125Vdc 0.034ohm max. DLW5ATN501TQ2p 500ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.056ohm max. DLW5BTM101TQ2p 100ohm (Typ.) 6000mA 50Vdc 10M ohm 125Vdc 0.013ohm max. DLW5BTM251TQ2p 250ohm (Typ.) 5000mA 50Vdc 10M ohm 125Vdc 0.020ohm max. DLW5BTM501TQ2p 500ohm (Typ.) 4000mA 50Vdc 10M ohm 125Vdc 0.027ohm max. DLW5BTM102TQ2p 1000ohm (Typ.) 2500mA 50Vdc 10M ohm 125Vdc 0.034ohm max. DLW5BTM142TQ2p 1400ohm (Typ.) 2000mA 50Vdc 10M ohm 125Vdc 0.056ohm max. Operating Temperature Range: -40C to +105C Number of Circuit: 1 c Impedance-Frequency Characteristics DLW5AT_TQ2 Series 10000 10000 Common mode Common mode DLW5ATN112MQ2 DLW5ATN501MQ2 DLW5ATN331MQ2 DLW5ATN151MQ2 DLW5ATN500MQ2 100 DLW5ATN331MQ2 DLW5ATN151MQ2 DLW5ATN500MQ2 DLW5ATN501MQ2 DLW5ATN112MQ2 Differential mode 10 1 1 DLW5ATN501TQ2 DLW5ATN401TQ2 DLW5ATN231TQ2 DLW5ATN111TQ2 1000 Impedance () 1000 Impedance () Chip Common Mode Choke Coil Universal Type [Power Lines/Signal Lines] DLW5AT_MQ2 Series 10 100 1000 100 10 DLW5ATN501TQ2 DLW5ATN401TQ2 DLW5ATN231TQ2 DLW5ATN111TQ2 Differential mode 1 1 10 100 10000 Common mode DLW5BTM142TQ2 DLW5BTM102TQ2 DLW5BTM501TQ2 DLW5BTM251TQ2 DLW5BTM101TQ2 1000 Impedance () Block Type EMIFILr DLW5BT_TQ2 Series 100 10 DLW5BTM142TQ2 DLW5BTM102TQ2 DLW5BTM501TQ2 DLW5BTM251TQ2 DLW5BTM101TQ2 Differential mode 1 10 100 1000 Microwave Absorber 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 182 1000 DLW Series Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil DLW5AT/DLW5BT Series (105degreeC available type) DLW5AT/DLW5BT In operating temperature exceeding +85C, derating of current is necessary for DLW5AT series (105 degree C available type). Please apply the derating curve shown in chart according to the operating temperature. In operating temperature exceeding +85C, derating of current is necessary for DLW5AT series (105 degree C available type). Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Derating of Rated Current 7000 8000 DLW5ATN500MQ2 7000 DLW5ATN151MQ2 5000 DLW5ATN331MQ2 4000 3000 2500 2000 DLW5ATN501MQ2 DLW5ATN112MQ2 1000 6000 DLW5ATN111TQ2 5000 DLW5ATN231TQ2 4000 3000 2500 2000 DLW5ATN501TQ2 1000 0 DLW5ATN401TQ2 Chip EMIFILr Rated Current (mA) 6000 Rated Current (mA) Chip Ferrite Bead c Notice (Rating) 0 0 20 40 60 85 80 105 100 Operating Temperature (C) 0 20 40 60 85 80 105 100 120 Operating Temperature (C) Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil In operating temperature exceeding +85C, derating of current is necessary for DLW5BT series (105 degree C available type). Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current 7000 DLW5BTM101TQ2 Rated Current (mA) 6000 DLW5BTM251TQ2 5000 DLW5BTM501TQ2 4000 3000 2500 2000 DLW5BTM102TQ2 DLW5BTM142TQ2 1000 0 20 40 60 85 80 105 100 120 Block Type EMIFILr 0 Microwave Absorber Operating Temperature (C) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 183 DLM Series Signal Lines Type Chip Common Mode Choke Coil DLM11G DLM11G Series 0504/1210 (inch/mm) Audio line common choke also effective to differential mode. (1) (2) (4) (3) 0.350.15 c Equivalent Circuit (1) 0.650.1 1.250.15 Chip Ferrite Bead c Dimensions 0.20.15 (3) (4) No polarity. 0.50.1 c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 10000 B Bulk(Bag) 1000 : Electrode 1.00.15 (2) (in mm) Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLM11GN601SD2p 600ohm 25% 100mA 5Vdc Operating Insulation Resistance Withstand DC Resistance Temperature Range (min.) Voltage 100M ohm 25Vdc Number of Circuit: 1 c Impedance-Frequency Characteristics DLM11GN601SD2 Differential mode 1000 Impedance () Chip Common Mode Choke Coil Signal Lines Type 10000 100 Common mode DLM11GN601SD2 10 1 1 10 100 1000 Microwave Absorber Block Type EMIFILr Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 184 0.8ohm max. -40C to +85C DLM Series Signal Lines Type Chip Common Mode Choke Coil DLM11S DLM11S Series 0504/1210 (inch/mm) 0504 size multilayer type chip common mode choke coil. c Equivalent Circuit 0.30.1 (2) 0.50.1 (1) Chip Ferrite Bead c Dimensions (3) (4) (1) 0.550.1 (2) 1.00.1 No polarity. c Packaging (3) (4) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 0.20.15 : Electrode 1.250.1 (in mm) Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance DLM11SN450HY2p 45ohm 25% 100mA 5Vdc 100M ohm 12.5Vdc 0.7ohm25% DLM11SN900HY2p 90ohm 25% 100mA 5Vdc 100M ohm 12.5Vdc 1.1ohm25% Number of Circuit: 1 c Impedance-Frequency Characteristics c Differential Mode Transmission Characteristics (Typ.) 0 1000 Common mode 2 Impedance () 100 Insertion Loss (dB) DLM11SN900HY2 DLM11SN450HY2 DLM11SN900HY2 DLM11SN450HY2 10 Differential mode 4 DLM11SN450HY2 DLM11SN900HY2 6 8 Signal Lines Type Chip Common Mode Choke Coil Operating Temperature Range: -40C to +85C 10 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 Microwave Absorber Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 185 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP0QS DLP0QS Series 025020/0605 (inch/mm) 025020 size, very small chip common mode choke coil, Cut-off frequency 8GHz max. Some of them are ready for Display port or SATA. Chip Ferrite Bead 0.300.05 c Dimensions c Equivalent Circuit (1) (2) 0.200.10 (3) (4) No polarity. (2) (4) (3) (0.40) 0.650.05 (1) c Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 15000 B Bulk(Bag) 500 0.150.07 0.500.05 : Electrode (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current DLP0QSN600HL2p 60ohm 25% 50mA 5Vdc 100M ohm 12.5Vdc 3.8ohm25% 0.7ohm25% DLP0QSA070HL2p 7ohm 2ohm 100mA 5Vdc 100M ohm 12.5Vdc DLP0QSA150HL2p 15ohm 5ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.8ohm25% DLP0QSA350HL2p 35ohm 10ohm 100mA 5Vdc 100M ohm 12.5Vdc 2.2ohm25% Operating Temperature Range: -40C to +85C Number of Circuit: 1 HD: for high speed differential signal lines DLP0QSN Series DLP0QSA Series 1000 1000 Common mode Common mode 100 DLP0QSA350HL2 DLP0QSA150HL2 DLP0QSA070HL2 100 DLP0QSN600HL2 DLP0QSN600HL2 10 Block Type EMIFILr UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics Impedance () Chip Common Mode Choke Coil Signal Lines Type Rated Insulation Resistance Withstand DC Resistance Voltage (min.) Voltage Impedance () Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) 10 DLP0QSA350HL2 DLP0QSA150HL2 DLP0QSA070HL2 Differential mode Differential mode 1 1 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 c Differential Mode Transmission Characteristics (Typ.) DLP0QSN Series DLP0QSA Series 0 0 DLP0QSN600HL2 2 Insertion Loss (dB) Insertion Loss (dB) Microwave Absorber 2 4 6 8 DLP0QSA070HL2 DLP0QSA150HL2 DLP0QSA350HL2 4 6 8 10 10 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 186 1000 10000 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP0NS DLP0NS Series 03025/0806 (inch/mm) 03025 size, very small chip common mode choke coil, Cut-off frequency 8GHz max. Some of them are ready for mipi, Display port or SATA. c Equivalent Circuit 0.270.1 (2) 0.450.05 (1) Chip Ferrite Bead c Dimensions (3) (4) 0.50.1 (2) (3) (4) 0.850.05 No polarity. (1) c Packaging 0.20+0.05 -0.10 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 10000 B Bulk(Bag) 500 0.650.05 : Electrode (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current DLP0NSC280HL2p 28ohm 20% 100mA 5Vdc 100M ohm 12.5Vdc 1.3ohm25% DLP0NSN350HL2p 35ohm 10ohm 100mA 5Vdc 100M ohm 12.5Vdc 1.2ohm25% DLP0NSN670HL2p 67ohm 20% 110mA 5Vdc 100M ohm 12.5Vdc 2.4ohm25% DLP0NSN900HL2p 90ohm 20% 100mA 5Vdc 100M ohm 12.5Vdc 3.0ohm25% DLP0NSN121HL2p 120ohm 20% 90mA 5Vdc 100M ohm 12.5Vdc 3.8ohm25% DLP0NSA070HL2p 7ohm 2ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.6ohm25% DLP0NSA150HL2p 15ohm 5ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.95ohm25% Operating Temperature Range: -40C to +85C Rated Insulation Resistance Withstand Voltage (min.) Voltage Number of Circuit: 1 HD: for high speed differential signal lines DC Resistance UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics DLP0NSC/DLP0NSN Series DLP0NSA Series 1000 10000 Common mode Common mode DLP0NSN121HL2 100 1000 DLP0NSA150HL2 DLP0NSN350HL2 100 DLP0NSC280HL2 DLP0NSN121HL2 10 DLP0NSA150HL2 DLP0NSA070HL2 DLP0NSN900HL2 10 DLP0NSA070HL2 Block Type EMIFILr DLP0NSN670HL2 Impedance () Impedance () DLP0NSN900HL2 1 DLP0NSN670HL2 Differential mode DLP0NSN350HL2 DLP0NSC280HL2 1 1 10 Signal Lines Type Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) 100 Frequency (MHz) Differential mode 1000 10000 0.1 1 10 100 Frequency (MHz) 1000 10000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 187 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP0NS Series 03025/0806 (inch/mm) DLP0NS c Differential Mode Transmission Characteristics (Typ.) DLP0NSC/DLP0NSN Series DLP0NSA Series 0 2 2 DLP0NSC280HL2 DLP0NSN350HL2 DLP0NSN670HL2 DLP0NSN900HL2 DLP0NSN121HL2 4 DLP0NSA070HL2 DLP0NSA150HL2 Insertion Loss (dB) Insertion Loss (dB) Chip Ferrite Bead 0 6 8 4 6 8 10 10 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Signal Lines Type Chip EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 188 1000 10000 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP11S/DLP11R/DLP11T DLP11S/DLP11R/DLP11T Series 0504/1210 (inch/mm) 8GHz cut-off frequency (for HDMI/USB3.0) is available. c Equivalent Circuit 0.30.1 (2) T (1) Chip Ferrite Bead c Dimensions (3) (4) No polarity. (1) 1.00.1 0.550.1 (2) Part Number T DLP11S 0.820.1 DLP11R 0.50.1 DLP11T 0.30.05 c Packaging Code (3) (4) L 0.25+0.1 -0.05 : Electrode 1.250.1 3000 (DLP11S) 180mm Reel 4000 (DLP11RN/RB) Embossed Tape 5000 (DLP11T) B (in mm) Minimum Quantity Packaging Bulk(Bag) 500 Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Insulation Resistance Withstand DC Resistance Voltage (min.) Voltage DLP11SN670SL2p 67ohm 20% 180mA 5Vdc 100M ohm 12.5Vdc 1.3ohm25% DLP11SN121SL2p 120ohm 20% 140mA 5Vdc 100M ohm 12.5Vdc 2.0ohm25% DLP11SN161SL2p 160ohm 20% 120mA 5Vdc 100M ohm 12.5Vdc 2.7ohm25% DLP11SN900HL2p 90ohm 20% 150mA 5Vdc 100M ohm 12.5Vdc 1.5ohm25% DLP11SN201HL2p 200ohm 20% 110mA 5Vdc 100M ohm 12.5Vdc 3.1ohm25% DLP11SN241HL2p 240ohm 20% 100mA 5Vdc 100M ohm 12.5Vdc 3.5ohm25% DLP11SN281HL2p 280ohm 20% 90mA 5Vdc 100M ohm 12.5Vdc 4.2ohm25% DLP11SN331HL2p 330ohm 20% 80mA 5Vdc 100M ohm 12.5Vdc 4.9ohm25% DLP11SA350HL2p 35ohm 20% 170mA 5Vdc 100M ohm 12.5Vdc 0.9ohm25% DLP11SA670HL2p 67ohm 20% 150mA 5Vdc 100M ohm 12.5Vdc 1.2ohm25% DLP11SA900HL2p 90ohm 20% 150mA 5Vdc 100M ohm 12.5Vdc 1.4ohm25% Operating Temperature Range: -40C to +85C Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics DLP11SN Series Signal Lines Type Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) DLP11SA Series 1000 10000 DLP11SN331HL2 DLP11SN281HL2 DLP11SN241HL2 DLP11SN201HL2 DLP11SN161SL2 DLP11SN121SL2 DLP11SN900HL2 DLP11SN670SL2 100 10 1 1 10 Common mode 100 DLP11SN331HL2 DLP11SN281HL2 DLP11SN241HL2 DLP11SN201HL2 DLP11SN161SL2 DLP11SN121SL2 DLP11SN900HL2 DLP11SN670SL2 Differential mode 100 Frequency (MHz) 1000 10000 Impedance () Impedance () 1000 Block Type EMIFILr Common mode DLP11SA900HL2 DLP11SA670HL2 DLP11SA350HL2 10 DLP11SA900HL2 DLP11SA670HL2 DLP11SA350HL2 Differential mode 1 1 10 100 Frequency (MHz) 1000 10000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 189 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP11S/DLP11R/DLP11T Series 0504/1210 (inch/mm) DLP11S/DLP11R/DLP11T c Differential Mode Transmission Characteristics (Typ.) DLP11SN Series DLP11SA Series 0 DLP11SA900HL2 2 2 Insertion Loss (dB) DLP11SN900HL2 Insertion Loss (dB) Chip Ferrite Bead 0 4 6 4 6 8 8 10 10 Chip EMIFILr 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Insulation Resistance Withstand DC Resistance Voltage (min.) Voltage DLP11RN450UL2p 45ohm 25% 100mA 5Vdc 100M ohm 12.5Vdc 0.8ohm25% DLP11RB150UL2p 15ohm 5ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.8ohm25% DLP11RB400UL2p 40ohm 10ohm 100mA 5Vdc 100M ohm 12.5Vdc Operating Temperature Range: -40C to +85C Number of Circuit: 1 HD: for high speed differential signal lines 1.3ohm25% UD: for ultra high speed differential signal lines Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz Impedance Characteristics between signal lines Z0 (TDR at 50ps) DLP11RB: 90ohm15ohm c Impedance-Frequency Characteristics DLP11RN Series DLP11RB Series 1000 1000 Common mode Common mode 100 Impedance () Impedance () Chip Common Mode Choke Coil Signal Lines Type DLP11RB: -40dB DLP11RN450UL2 DLP11RN450UL2 10 DLP11RB150UL2 DLP11RB400UL2 100 10 DLP11RB150UL2 DLP11RB400UL2 Block Type EMIFILr Differential mode Differential mode 1 1 10 100 Frequency (MHz) 1000 1 10000 1 10 1000 10000 c Differential Mode Transmission Characteristics (Typ.) DLP11RN Series DLP11RB Series 0 0 2 2 DLP11RB400UL2 Insertion Loss (dB) Insertion Loss (dB) DLP11RN450UL2 Microwave Absorber 100 Frequency (MHz) 4 6 8 4 6 8 10 10 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 Continued on the following page. !Note 190 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP11S/DLP11R/DLP11T Series 0504/1210 (inch/mm) DLP11S/DLP11R/DLP11T c Rated Value (p: packaging code) Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLP11TB800UL2p 80ohm 25% 100mA 5Vdc Operating Temperature Range: -40C to +85C Number of Circuit: 1 Insulation Resistance Withstand (min.) Voltage 100M ohm 12.5Vdc HD: for high speed differential signal lines DC Resistance 1.5ohm25% UD: for ultra high speed differential signal lines Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz DLP11TB: -40dB Impedance Characteristics between signal lines Z0 (TDR at 50ps) DLP11TB: 90ohm15ohm c Impedance-Frequency Characteristics c Differential Mode Transmission Characteristics (Typ.) DLP11TB Series DLP11TB Series 1000 Chip Ferrite Bead Part Number 0 Common mode DLP11TB800UL2 Impedance () DLP11TB800UL2 DLP11TB800UL2 10 4 Chip EMIFILr 100 Insertion Loss (dB) 2 6 8 Differential mode 1 10 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 Microwave Absorber Block Type EMIFILr Signal Lines Type Chip Common Mode Choke Coil 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 191 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP31S DLP31S Series 1206/3216 (inch/mm) 1206 size film type chip common mode choke coil. c Dimensions c Equivalent Circuit 0.70.2 (2) Chip Ferrite Bead 1.150.15 (1) 1.60.15 (2.1) (3) (4) No polarity. 3.20.15 (1) (2) c Packaging (4) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 (3) : Electrode 0.30.2 (in mm) Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLP31SN121ML2p 120ohm 20% 100mA 16Vdc 100M ohm 40Vdc 2.0ohm max. DLP31SN221ML2p 220ohm 20% 100mA 16Vdc 100M ohm 40Vdc 2.5ohm max. DLP31SN551ML2p 550ohm 20% 100mA 16Vdc 100M ohm 40Vdc 3.6ohm max. Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics 10000 1000 DLP31SN551ML2 Impedance () Chip Common Mode Choke Coil Signal Lines Type Operating Temperature Range: -40C to +85C Insulation Resistance Withstand DC Resistance (min.) Voltage DLP31SN221ML2 DLP31SN121ML2 100 Common mode 10 DLP31SN121ML2 DLP31SN221ML2 DLP31SN551ML2 Differential mode 1 1 10 100 1000 Microwave Absorber Block Type EMIFILr Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 192 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP1ND DLP1ND Series 05025/1506 (inch/mm) c Dimensions c Equivalent Circuit (2) (3) (4) (5) (6) (7) (8) 0.450.05 (1) 0.1 min. 0.20.1 (2) (3) (4) (5) (6) (7) No polarity. (8) 0.40.1 0.650.1 0.20.1 (1) Chip Ferrite Bead 2 circuits in 05025 size, adapt to HDMI line. c Packaging 1.50.1 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 5000 B Bulk(Bag) 500 : Electrode (in mm) Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLP1NDN350HL4p 35ohm 20% 100mA 5Vdc 100M ohm 12.5Vdc 1.8ohm25% DLP1NDN670HL4p 67ohm 20% 80mA 5Vdc 100M ohm 12.5Vdc 2.9ohm25% DLP1NDN900HL4p 90ohm 20% 60mA 5Vdc 100M ohm 12.5Vdc 3.7ohm25% Number of Circuit: 2 c Impedance-Frequency Characteristics HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Differential Mode Transmission Characteristics (Typ.) 0 10000 Common mode 1000 -2 DLP1NDN900HL4 DLP1NDN900HL4 Insertion Loss (dB) Impedance () DC Resistance DLP1NDN670HL4 DLP1NDN350HL4 100 -4 -6 DLP1NDN350HL4 10 DLP1NDN670HL4 Signal Lines Type Chip Common Mode Choke Coil Operating Temperature Range: -40C to +85C Insulation Resistance Withstand (min.) Voltage -8 DLP1NDN900HL4 Differential mode -10 1 10 100 Frequency (MHz) 1000 10000 10 100 1000 10000 Frequency (MHz) Microwave Absorber Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 193 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP2AD DLP2AD Series 0804/2010 (inch/mm) 2 circuit built-in, 0804 size, HDMI adapted type available, cut-off frequency 6GHz max. c Dimensions c Equivalent Circuit 0.50.1 (1) (2) (3) (4) (5) (6) (7) No polarity. (8) (1) (2) (3) (4) (5) (6) (7) (8) 1.00.1 0.250.15 0.820.1 Chip Ferrite Bead 0.250.1 c Packaging 2.00.1 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 : Electrode (in mm) Chip Common Mode Choke Coil Signal Lines Type Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current DLP2ADA350HL4p 35ohm 20% 150mA 5Vdc 100M ohm 12.5Vdc 0.8ohm25% DLP2ADA670HL4p 67ohm 20% 130mA 5Vdc 100M ohm 12.5Vdc 1.0ohm25% DLP2ADA900HL4p 90ohm 20% 120mA 5Vdc 100M ohm 12.5Vdc 1.4ohm25% DLP2ADN670HL4p 67ohm 20% 140mA 5Vdc 100M ohm 12.5Vdc 1.3ohm25% DLP2ADN900HL4p 90ohm 20% 130mA 5Vdc 100M ohm 12.5Vdc 1.7ohm25% DLP2ADN121HL4p 120ohm 20% 120mA 5Vdc 100M ohm 12.5Vdc 2.0ohm25% DLP2ADN161HL4p 160ohm 20% 100mA 5Vdc 100M ohm 12.5Vdc 2.5ohm25% DLP2ADN201HL4p 200ohm 20% 90mA 5Vdc 100M ohm 12.5Vdc 3.2ohm25% DLP2ADN241HL4p 240ohm 20% 80mA 5Vdc 100M ohm 12.5Vdc 3.8ohm25% DLP2ADN281HL4p 280ohm 20% 80mA 5Vdc 100M ohm 12.5Vdc Operating Temperature Range: -40C to +85C Rated Insulation Resistance Withstand DC Resistance Voltage (min.) Voltage HD: for high speed differential signal lines Number of Circuit: 2 c Impedance-Frequency Characteristics DLP2ADA Series DLP2ADN Series 10000 1000 Common mode Common mode DLP2ADN281HL4 DLP2ADN241HL4 DLP2ADN201HL4 DLP2ADN161HL4 DLP2ADN121HL4 DLP2ADN900HL4 DLP2ADN670HL4 DLP2ADA900HL4 1000 100 DLP2ADA350HL4 DLP2ADA900HL4 Impedance () Impedance () DLP2ADA670HL4 Block Type EMIFILr 4.6ohm25% UD: for ultra high speed differential signal lines 100 10 10 DLP2ADA670HL4 DLP2ADA350HL4 Differential mode 1 1 10 100 Frequency (MHz) 1000 10000 DLP2ADN670HL4 1 1 10 DLP2ADN281HL4 DLP2ADN241HL4 DLP2ADN201HL4 DLP2ADN161HL4 DLP2ADN121HL4 Differential mode DLP2ADN900HL4 100 Frequency (MHz) 1000 10000 Microwave Absorber Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 194 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP2AD Series 0804/2010 (inch/mm) DLP2AD c Differential Mode Transmission Characteristics (Typ.) DLP2ADA Series DLP2ADN Series 0 2 2 DLP2ADA900HL4 DLP2ADN900HL4 Insertion Loss (dB) Insertion Loss (dB) Chip Ferrite Bead 0 4 6 4 6 8 8 10 10 10 100 1000 10000 1 10 100 Frequency (MHz) 1000 10000 Microwave Absorber Block Type EMIFILr Signal Lines Type Chip Common Mode Choke Coil Chip EMIFILr Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 195 DLP Series Signal Lines Type Chip Common Mode Choke Coil DLP31D DLP31D Series 1206/3216 (inch/mm) 2 circuit built-in, 1206 size, meet IEEE1394, USB, LVDS. c Equivalent Circuit (1) (2) (3) (4) (5) (6) (7) No polarity. (8) 0.40.2 (2) (3) (4) c Packaging 1.60.15 (1) 0.80.1 0.30.2 Chip Ferrite Bead 1.150.15 c Dimensions (5) (6) (7) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 (8) : Electrode 3.20.15 (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLP31DN900ML4p 90ohm 20% 160mA 10Vdc 100M ohm 25Vdc 1.1ohm max. DLP31DN131ML4p 130ohm 20% 120mA 10Vdc 100M ohm 25Vdc 1.1ohm max. DLP31DN201ML4p 200ohm 20% 100mA 10Vdc 100M ohm 25Vdc 2.2ohm max. DLP31DN321ML4p 320ohm 20% 80mA 10Vdc 100M ohm 25Vdc 3.5ohm max. DLP31DN441ML4p 440ohm 20% 70mA 10Vdc 100M ohm 25Vdc 4.3ohm max. Operating Temperature Range: -40C to +85C Number of Circuit: 2 Insulation Resistance Withstand DC Resistance (min.) Voltage HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics 10000 Common mode DLP31DN441ML4 DLP31DN321ML4 DLP31DN201ML4 DLP31DN131ML4 DLP31DN900ML4 1000 Impedance () Chip Common Mode Choke Coil Signal Lines Type Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) 100 DLP31DN441ML4 DLP31DN321ML4 Block Type EMIFILr 10 DLP31DN900ML4 DLP31DN131ML4 DLP31DN201ML4 Differential mode 1 1 10 100 1000 Microwave Absorber Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 196 DLW Series Signal Lines Type Chip Common Mode Choke Coil DLW21S DLW21S Series 0805/2012 (inch/mm) Wire-wound common choke, HDMI available type prepared. c Equivalent Circuit 2.00.2 (3) (4) 1.20.2 No polarity. (2) (0.4) (1) (2) (0.17) 1.20.2 (1) Chip Ferrite Bead c Dimensions (0.4) c Packaging (4) (3) (0.45) (0.45) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 2000 B Bulk(Bag) 500 : Electrode (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLW21SN670SQ2p 67ohm 25% 400mA 50Vdc 10M ohm 125Vdc 0.25ohm max. DLW21SN900SQ2p 90ohm 25% 330mA 50Vdc 10M ohm 125Vdc 0.35ohm max. DLW21SN121SQ2p 120ohm 25% 370mA 50Vdc 10M ohm 125Vdc 0.30ohm max. DLW21SN181SQ2p 180ohm 25% 330mA 50Vdc 10M ohm 125Vdc 0.35ohm max. DLW21SN261SQ2p 260ohm 25% 300mA 50Vdc 10M ohm 125Vdc 0.40ohm max. DLW21SN371SQ2p 370ohm 25% 280mA 50Vdc 10M ohm 125Vdc 0.45ohm max. DLW21SN501SK2p 500ohm 25% 250mA 50Vdc 10M ohm 125Vdc 0.5ohm max. Operating Temperature Range: -40C to +85C Number of Circuit: 1 Insulation Resistance Withstand DC Resistance (min.) Voltage HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics DLW21SN_SQ2/SK2 Series 10000 DLW21SN501SK2 DLW21SN371SQ2 DLW21SN261SQ2 DLW21SN181SQ2 Common mode 1000 Signal Lines Type Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) DLW21SN670SQ2 10 Block Type EMIFILr Impedance () DLW21SN121SQ2 DLW21SN900SQ2 100 DLW21SN501SK2 DLW21SN371SQ2 DLW21SN261SQ2 DLW21SN181SQ2 DLW21SN121SQ2 DLW21SN900SQ2 Differential mode DLW21SN670SQ2 1 0.1 1 10 100 1000 Frequency (MHz) c Rated Value (p: packaging code) Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage Insulation Resistance Withstand DC Resistance (min.) Voltage DLW21SN670HQ2p 67ohm 25% 320mA 20Vdc 10M ohm 50Vdc 0.31ohm max. DLW21SN900HQ2p 90ohm 25% 280mA 20Vdc 10M ohm 50Vdc 0.41ohm max. DLW21SN121HQ2p 120ohm 25% 280mA 20Vdc 10M ohm 50Vdc 0.41ohm max. DLW21SR670HQ2p 67ohm 25% 400mA 20Vdc 10M ohm 50Vdc 0.25ohm max. Operating Temperature Range: -40C to +85C Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines DLW21SR670HQ2 is designed to correct line impedance when ESD protection device is also used. Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 197 Microwave Absorber Part Number DLW Series Signal Lines Type Chip Common Mode Choke Coil DLW21S Series 0805/2012 (inch/mm) DLW21S c Impedance-Frequency Characteristics DLW21SN_HQ2 Series DLW21SR_HQ2 Series 1000 1000 DLW21SN121HQ2 Common mode DLW21SN900HQ2 DLW21SN670HQ2 100 100 Impedance () DLW21SR670HQ2 Impedance () Chip Ferrite Bead Common mode 10 10 DLW21SN121HQ2 1 Differential mode 1 DLW21SR670HQ2 DLW21SN900HQ2 DLW21SN670HQ2 Differential mode 0.1 Chip Common Mode Choke Coil Signal Lines Type 100 Frequency (MHz) 10 100 1000 Frequency (MHz) 0 DLW21SN900HQ2 2 4 6 8 10 1 10 100 Frequency (MHz) 1000 10000 c Rated Value (p: packaging code) Common Mode Impedance (at 100MHz/20C) Part Number Rated Current Rated Voltage Insulation Resistance Withstand DC Resistance (min.) Voltage DLW21SN181XQ2p 180ohm 25% 240mA 20Vdc 10M ohm 50Vdc 0.39ohm max. DLW21SN261XQ2p 260ohm 25% 220mA 20Vdc 10M ohm 50Vdc 0.59ohm max. DLW21SN491XQ2p 490ohm 25% 190mA 20Vdc 10M ohm 50Vdc 0.77ohm max. Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics c Differential Mode Transmission Characteristics (Typ.) DLW21SN_XQ2 Series DLW21SN_XQ2 Series 10000 0 Common mode DLW21SN181XQ2 Impedance () 2 DLW21SN491XQ2 1000 Insertion Loss (dB) Block Type EMIFILr 1 DLW21SN_HQ2 Series Operating Temperature Range: -40C to +85C Microwave Absorber 1000 c Differential Mode Transmission Characteristics (Typ.) Insertion Loss (dB) Chip EMIFILr 0.1 10 DLW21SN261XQ2 100 4 6 DLW21SN491XQ2 10 DLW21SN261XQ2 8 Differential mode 1 1 10 100 Frequency (MHz) 1000 3000 10 1 10 100 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 1000 * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 198 10000 DLW Series Signal Lines Type Chip Common Mode Choke Coil DLW21H DLW21H Series 0805/2012 (inch/mm) Low profile wire-wound common choke coil, HDMI available type prepared. c Dimensions c Equivalent Circuit (2) 2.00.2 1.20.2 Chip Ferrite Bead (0.17) 0.90.1 (1) (3) (4) No polarity. (0.45) (1) (2) c Packaging (0.4) (0.4) (0.45) (4) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 : Electrode (3) (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance DLW21HN670SQ2p 67ohm 25% 330mA 50Vdc 10M ohm 125Vdc 0.35ohm max. DLW21HN900SQ2p 90ohm 25% 330mA 50Vdc 10M ohm 125Vdc 0.35ohm max. DLW21HN121SQ2p 120ohm 25% 280mA 50Vdc 10M ohm 125Vdc 0.45ohm max. DLW21HN181SQ2p 180ohm 25% 250mA 50Vdc 10M ohm 125Vdc 0.50ohm max. DLW21HN670HQ2p 67ohm 25% 240mA 20Vdc 10M ohm 50Vdc 0.49ohm max. DLW21HN900HQ2p 90ohm 25% 220mA 20Vdc 10M ohm 50Vdc 0.59ohm max. DLW21HN121HQ2p 120ohm 25% 200mA 20Vdc 10M ohm 50Vdc 0.68ohm max. Operating Temperature Range: -40C to +85C Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics 10000 10000 DLW21HN181SQ2 Common mode Common mode 1000 1000 Impedance () Impedance () DLW21HN121SQ2 DLW21HN900SQ2 100 DLW21HN670SQ2 10 DLW21HN121HQ2 DLW21HN900HQ2 100 Signal Lines Type Chip Common Mode Choke Coil Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) DLW21HN670HQ2 10 DLW21HN121SQ2 1 1 DLW21HN121HQ2 DLW21HN900HQ2 DLW21HN670HQ2 DLW21HN900SQ2 Differential mode DLW21HN670SQ2 0.1 0.1 1 10 100 Block Type EMIFILr DLW21HN181SQ2 1000 Frequency (MHz) 1 10 Differential mode 100 1000 Frequency (MHz) c Differential Mode Transmission Characteristics (Typ.) 0 DLW21HN670HQ2 DLW21HN900HQ2 DLW21HN121HQ2 4 Microwave Absorber Insertion Loss (dB) 2 6 8 10 1 10 100 Frequency (MHz) 1000 10000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 199 DLW Series Signal Lines Type Chip Common Mode Choke Coil DLW31S DLW31S Series 1206/3216 (inch/mm) 1206 size wire-wound common mode choke coil. c Equivalent Circuit 3.20.2 (3) (4) 1.60.2 No polarity. (2) c Packaging (0.6) (0.6) (1) (2) 1.90.2 (1) (0.25) Chip Ferrite Bead c Dimensions (4) (3) Packaging Minimum Quantity L 180mm Reel Embossed Tape 2000 B Bulk(Bag) 500 : Electrode (0.6) (0.6) Code (in mm) Part Number Common Mode Impedance (at 100MHz/20C) Rated Current Rated Voltage DLW31SN900SQ2p 90ohm 25% 370mA 50Vdc 10M ohm 125Vdc 0.3ohm max. DLW31SN161SQ2p 160ohm 25% 340mA 50Vdc 10M ohm 125Vdc 0.4ohm max. DLW31SN261SQ2p 260ohm 25% 310mA 50Vdc 10M ohm 125Vdc 0.5ohm max. DLW31SN601SQ2p 600ohm 25% 260mA 50Vdc 10M ohm 125Vdc 0.8ohm max. DLW31SN102SQ2p 1000ohm 25% 230mA 50Vdc 10M ohm 125Vdc 1.0ohm max. DLW31SN222SQ2p 2200ohm 25% 200mA 50Vdc 10M ohm 125Vdc 1.2ohm max. Operating Temperature Range: -40C to +85C Number of Circuit: 1 Insulation Resistance Withstand DC Resistance (min.) Voltage HD: for high speed differential signal lines UD: for ultra high speed differential signal lines c Impedance-Frequency Characteristics 10000 DLW31SN222SQ2 DLW31SN102SQ2 DLW31SN601SQ2 DLW31SN261SQ2 DLW31SN161SQ2 DLW31SN900SQ2 Common mode Impedance () 1000 100 10 DLW31SN222SQ2 DLW31SN102SQ2 DLW31SN601SQ2 DLW31SN261SQ2 DLW31SN161SQ2 DLW31SN900SQ2 Differential mode 1 0.1 1 10 100 1000 Frequency (MHz) Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Signal Lines Type Chip EMIFILr Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 200 DLW Series Signal Lines Type Chip Common Mode Choke Coil DLW43S DLW43S Series 1812/4532 (inch/mm) 1812 size wire-wound common choke, Automotive Type. c Equivalent Circuit (0.30) 2.60.2 (0.8) 4.50.2 (2) (1) Chip Ferrite Bead c Dimensions DLW43S_XK (3) (4) No polarity. 3.20.2 c Packaging (2) (4) (3) Code Packaging (0.6): 100H (0.7): 11, 22, 51H (in mm) c Dimensions 180mm Reel Embossed Tape 500 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 (2) (1) (0.30) (0.8) 4.50.2 L K c Equivalent Circuit 2.70.2 DLW43S_XP Minimum Quantity Chip EMIFILr (1) (3) (4) No polarity. (4) Code Packaging (3) (0.6) (in mm) Minimum Quantity L 180mm Reel Embossed Tape 500 K 330mm Reel Embossed Tape 2500 B Bulk(Bag) 100 Refer to pages from p.205 to p.209 for mounting information. c Rated Value (p: packaging code) Part Number Common Mode Inductance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance Operating Temperature Range DLW43SH110XK2p 11H -30%/+50% (at 0.1MHz) 360mA 50Vdc 10M ohm 125Vdc 0.5ohm max. -40C to +125C DLW43SH220XK2p 22H -30%/+50% (at 0.1MHz) 310mA 50Vdc 10M ohm 125Vdc 0.6ohm max. -40C to +125C DLW43SH510XK2p 51H -30%/+50% (at 1MHz) 230mA 50Vdc 10M ohm 125Vdc 1.0ohm max. -40C to +125C DLW43SH101XK2p 100H -30%/+50% (at 1MHz) 200mA 50Vdc 10M ohm 125Vdc 2.0ohm max. -40C to +125C DLW43SH101XP2p 100H -30%/+80% (at 0.1MHz) 170mA 50Vdc 10M ohm 125Vdc 2.0ohm max. -40C to +125C Number of Circuit: 1 c Impedance-Frequency Characteristics DLW43S_XK Series DLW43S_XP Series 100000 Block Type EMIFILr c Packaging (2) Signal Lines Type Chip Common Mode Choke Coil 3.20.2 (1) 10000 DLW43SH510XK2 DLW43SH101XK2 Common mode 1000 10000 DLW43SH101XP2 1000 DLW43SH220XK2 DLW43SH110XK2 Differential Mode 100 100 10 Microwave Absorber Impedance () Impedance () Common Mode DLW43SH101XP2 DLW43SH10XK2 10 1 DLW43SH510XK2 Differential mode DLW43SH220XK2 DLW43SH110XK2 1 1 10 Frequency (MHz) 100 0.1 0.1 1 10 100 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 201 PLT Series Power Lines Type Large Current Common Mode Choke Coil for Automotive Available PLT10H PLT10H Series (12.9x6.6mm) Automotive application available, up to 18A. c Dimensions c Equivalent Circuit (1) (2) (2) (1) Chip Ferrite Bead 102 (4) (3) 6.60.2 2.10.3 9.10.2 2.00.3 No polarity. c Packaging Code Packaging Minimum Quantity 2.10.3 9.4 max. 13.4 max. 1.00.2 (3) (4) 12.90.2 : Electrode 1.00.2 L 180mm Reel Embossed Tape 125 K 330mm Reel Embossed Tape 500 B Bulk(Bag) 50 (in mm) 3.20.3 Part Number Common Mode Impedance (at 10MHz/20C) Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance Inductance PLT10HH450180PNp 45ohm (Typ.) 18A 300Vdc 10M ohm 750Vdc 1.3m ohm0.5m ohm 0.8H min. PLT10HH101150PNp 100ohm (Typ.) 15A 300Vdc 10M ohm 750Vdc 1.8m ohm0.5m ohm 2.0H min. PLT10HH401100PNp 400ohm (Typ.) 10A 100Vdc 10M ohm 250Vdc 3.6m ohm0.5m ohm 6H min. PLT10HH501100PNp 500ohm (Typ.) 10A 100Vdc 10M ohm 250Vdc 3.6m ohm0.5m ohm 9H min. PLT10HH9016R0PNp 900ohm (Typ.) 6A 100Vdc 10M ohm 250Vdc 8.0m ohm0.5m ohm 14H min. PLT10HH1026R0PNp 1000ohm (Typ.) 6A 100Vdc 10M ohm 250Vdc 8.0m ohm0.5m ohm 20H min. Operating Temperature Range (Self-temperature rise is included): -55C to +105C (PLT10HH 501100/1026R0 PN), -55C to +125C (PLT10HH 450180/101150/401100/9016R0 PN) c Impedance-Frequency Characteristics c Notice (Rating) In operating temperature exceeding +65C, derating of current is necessary for PLT10H series. Please apply the derating curve shown in chart according to the operating temperature. 10000 PLT10HH1026R0PN PLT10HH9016R0PN PLT10HH401100PN 1000 Impedance () Chip Common Mode Choke Coil Power Lines Type Chip EMIFILr Refer to pages from p.210 to p.211 for mounting information. c Rated Value (p: packaging code) PLT10HH501100PN Derating of Rated Current 100 PLT10HH450 16 PLT10HH450180PN 10 1 10 100 Frequency (MHz) 1000 Rated Current (A) Block Type EMIFILr 20 PLT10HH101150PN PLT10HH401 PLT10HH101 12 PLT10HH901 8 PLT10HH501 4 PLT10HH102 0 0 20 40 60 80 100 120 Microwave Absorber Operating Temperature (C) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 202 140 Number of Circuit: 1 DLp Chip Common Mode Choke Coil !Caution/Notice !Caution Z wrong direction Notice o Storage and Operating Conditions o Handling <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period DLM11G series should be used within 6 months, the other series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Resin Coating (Except for DLW Series.) Using resin for coating/molding products may affect the products performance. So please pay careful attention in selecting resin. Prior to use, please make the reliability evaluation with the product mounted in your application set. 2. Resin Coating (DLW Series) The impedance value may change due to high curestress of resin to be used for coating/molding products. An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to open circuit. So, please pay your careful attention in selecting resin in case of coating/molding the products with the resin. Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board. 3. Caution for Use (DLW Series) When you hold products with a tweezer, please hold by the sides. Sharp materials, such as a pair of tweezers, should not touch the winding portion to prevent breaking the wire. Mechanical shock should not be applied to the products mounted on the board to prevent breaking the core. 4. Brushing When you clean the neighborhood of products such as connector pins, bristles of cleaning brush shall not be touched to the winding portion of this product to prevent the breaking of wire. 5. Handling of a Substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. o Notice (Soldering and Mounting) 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design. Bending Twisting !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 203 Chip EMIFILr right direction Chip Common Mode Choke Coil Chip Common Mode Choke Coil !Caution/Notice 1. Self-heating Please provide special attention when mounting chip common mode choke coils DLW5 series in close proximity to other products that radiate heat. The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component. Z Block Type EMIFILr o Soldering and Mounting Chip Ferrite Bead 2. Mounting Direction Mount Chip Common Mode Choke Coils in right direction. Wrong direction, which is 90 degrees rotated from right direction, causes not only open or short circuit but also flames or other serious trouble. Microwave Absorber o Rating Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. PLp Chip Common Mode Choke Coil !Caution/Notice !Caution Chip Ferrite Bead o Rating 1. Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. 2. Mounting Direction Mount Chip Common Mode Choke Coils in right direction. Wrong direction, which is 90 degrees rotated from right direction, causes not only open or short circuit but also flames or other serious trouble. Z Z 1. Self-heating Please provide special attention when mounting chip common mode choke coils in close proximity to other products that radiate heat. The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component. right direction wrong direction Notice o Storage and Operating Conditions o Notice (Soldering and Mounting) <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period PLT10H series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. Block Type EMIFILr Chip Common Mode Choke Coil !Caution/Notice Chip Common Mode Choke Coil Chip EMIFILr o Soldering and Mounting o Handling Microwave Absorber 1. Handling of a Substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. Bending !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 204 Twisting DL p Soldering and Mounting Chip Common Mode Choke Coil 1. Standard Land Pattern Dimensions Land Pattern + Solder Resist Land Pattern Solder Resist Chip Ferrite Bead oReflow and Flow DLP31D 2.8 0.8 2.2-2.6 0.7 2.1 0.7 DLP31S 0.8 Pitch 1.0 0.6 1.0 0.4 DLP0NS DLP11S/DLM11S 0.90 DLP11R/11T 1.95 1.55 0.55 0.85 0.3 (2) 0.55 (1) 0.3 0.55 0.55 DLM11G DLW21S/21H/31SN/43S 1.75 0.25 d1 1.1 0.3 1.5 0.4 0.9 0.3 0.5 1.5 0.4 a3 0.5 b 4.7 3.3 1.3 DLW5A/5B (Except for DLW5AT_MQ2) a b c d DLW21S/H Series 0.8 2.6 0.4 1.2 DLW31SN 1.6 3.7 0.4 1.6 DLW43SH110/220/510 3.0 5.9 1.6 3.4 DLW43SH101 3.2 5.9 1.6 3.4 1: 0.9 2.9 5.5 If the pattern is made with wider than 1.2mm (DLW21) / 1.6mm (DLW31S) it may result in components turning around, because melting speed is different. In the worst case, short circuit between lines may occur. 2: If the pattern is made with less than specified dimensions, in the worst case, short circuit between lines may occur due to spread of soldering paste or mount placing accuracy. 3: If the pattern is made with wider than 0.8mm (DLW21) / 1.6mm (DLW31SN), the bending strength will be reduced. Do not use gild pattern; excess soldering heat may dissolve metal of a copper wire. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 205 Block Type EMIFILr DLP2AD 1.4 0.2 Microwave Absorber DLP1ND Chip Common Mode Choke Coil Mounting ChipSoldering Commonand Mode Choke Coil 0.30 0.80 c2 (2) (3) 0.85 (1) (4) 0.50 (3) 0.3 (4) 0.80 0.23 0.20 Chip EMIFILr oReflow Soldering DLP0QS 0.71 DLM11S DLM11G DLP0QS DLP0NS DLP11S DLP11R DLP11T DLP1ND DLP2AD DLP31S DLP31D DLW21S DLW21H DLW31SN DLW43S DLW5A DLW5B (in mm) DLp Chip Common Mode Choke Coil Soldering and Mounting Land Pattern + Solder Resist Land Pattern Solder Resist oReflow Soldering Chip Mounting Side oFlow Soldering Chip Mounting Side 1.3 4.7 3.3 DLW5AT_MQ2 1.3 Chip Ferrite Bead DLW5AT_MQ2 6.0 DLW5AT_MQ2 (in mm) 0.9 1.9 Chip EMIFILr 2.9 5.5 o PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. 6.9 Products should be located in the sideways direction (Length: a<b) to the mechanical stress. a b Microwave Absorber Block Type EMIFILr ChipSoldering Commonand Mode Choke Coil Mounting Chip Common Mode Choke Coil Poor example !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 206 Good example DLp Chip Common Mode Choke Coil Soldering and Mounting When flow soldering the chip common mode choke coils, apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. When reflow soldering the chip common mode choke coils, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. Chip Ferrite Bead 2. Solder Paste Printing and Adhesive Application (in mm) DLP DLW DLM Solder Paste Printing Adhesive Application oGuideline of solder paste thickness: 80-100m: DLP0QS 100-150m: DLW21S/21H/31S, DLP0NS/11S/11R/11T/1ND/2AD/ DLM11S/11G 150m: DLW43S 150-200m: DLP31D/31S, DLW5A/5B *Solderability is subject to reflow conditions and thermal conductivity. Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. DLP31S/DLP31D/ DLW5AT_MQ2 Apply 0.3mg of bonding agent at each chip. Chip EMIFILr Series DLP31D DLP0QS/0NS/11S/11R/11T/31S/DLM11S/11G b c d DLP0QS 0.3 0.2 0.23 0.48 DLP0NS 0.3 0.3 0.3 0.5 a b a DLM11S/DLP11S 0.7 0.55 0.3 0.55 DLP11R/T 0.5 0.55 0.3 0.55 DLP31S 1.0 0.6 0.7 2.1 DLM11G 0.5 0.5 0.4 0.7 Coating Position of Bonding Agent Chip Common Mode Choke Coil Mounting ChipSoldering Commonand Mode Choke Coil a c d Series DLP31S c d DLW21S/21H/31S a a b c d DLW21S/H Series 0.8 2.6 0.5 1.2 DLW31S 1.6 3.7 0.4 1.6 Coating Position of Bonding Agent b DLW5AT_MQ2 DLP1ND/2AD/31D b c d a 0.3 0.3 0.2 0.4 b Series DLP2AD 0.55 0.4 0.25 0.5 DLP31D 1.0 0.8 0.4 0.8 Block Type EMIFILr a DLP1ND a c d Series DLW43S a b a 3.0 (110/220/510) 3.2 (101) b c d Coating Position of Bonding Agent 5.9 1.6 3.4 Microwave Absorber d c DLW43S 1.3 3.3 4.7 DLW5A/5B 0.9 2.9 5.5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 207 DLp Chip Common Mode Choke Coil Soldering and Mounting Chip Ferrite Bead 3. Standard Soldering Conditions Flux: o Use Rosin-based flux. In case of DLW21/31 series, use Rosin-based flux with converting chlorine content of 0.06 to 0.1wt%. In case of using RA type solder, products should be cleaned completely with no residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. (1) Soldering Methods Use flow and reflow soldering methods only. Use standard soldering conditions when soldering chip common mode choke coils. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. If using DLP/DLM series with Sn-Zn based solder, please contact Murata in advance. For additional mounting methods, please contact Murata. Temperature (C) oFlow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) ChipSoldering Commonand Mode Choke Coil Mounting Chip Common Mode Choke Coil Chip EMIFILr (2) Soldering Profile T3 T2 t2 Heating T1 Standard Profile Pre-heating t1 DLW5AT_MQ2 DLP31D/31S Time (s) Standard Profile Pre-heating Series Limit Profile Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) 150C 60s min. 250C 4 to 6s Limit Profile Cycle of Flow Heating Temp. (T3) Time. (t2) 2653C 5s max. 2 times max. Cycle of Flow 2 times max. oReflow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) Block Type EMIFILr Temperature (C) T4 T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile t2 90s30s time (s) Standard Profile Series Temp. (T1) Microwave Absorber Limit Profile Peak Cycle Temperature of Reflow (T2) Time. (t1) Heating Temp. (T3) Peak Cycle Temperature of Reflow (T4) Time. (t2) Heating DLM/DLP DLW21/31 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 2 times max. DLW43S 220C min. 30 to 60s 2453C 2 times max. 240C min. 30s max. 260C/10s 2 times max. DLW5A/5B 220C min. 30 to 60s 2503C 2 times max. 230C min. 60s max. 260C/10s 2 times max. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 208 DLp Chip Common Mode Choke Coil Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. Chip Ferrite Bead (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating: 150C 60s min. Soldering iron power output / Tip diameter: 30W max. / o3mm max. Temperature of soldering iron tip / Soldering time / Times: 350C max. / 3-4s / 2 times*1 1 * DLP0QS, DLP0NS, DLP11S, DLP11T, DLP1ND, DLP2AD: 380C max. / 3-4s / 2 times DLW43S: 350C max. / 3s / 2 times Soldering and Mounting 4. Cleaning Chip Common Mode Choke Coil Mounting ChipSoldering Commonand Mode Choke Coil Chip EMIFILr Before cleaning, please contact Murata engineering. (a) Alcohol cleaning agent Isopropyl alcohol (IPA) (b) Aqueous cleaning agent Pine Alpha ST-100S (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agent has been removed with deionized water. Microwave Absorber Block Type EMIFILr Following conditions should be observed when cleaning chip EMI filter. (1) Cleaning Temperature: 60C max. (40C max. for alcohol type cleaner) (2) Ultrasonic Output: 20W/liter max. Duration: 5 minutes max. Frequency: 28 to 40kHz (3) Cleaning agent The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production. Do not clean DLW (Except for DLW21H) series. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 209 PL p Chip Common Mode Choke Coil Soldering and Mounting 1. Standard Land Pattern Dimensions (in mm) Chip Ferrite Bead PLT10H oReflow Soldering 2.0 2.5 2.0 PLT10H 4.0 Chip EMIFILr Copper Foil Pattern Copper Foil Pattern + Resist Resist 8.0 4.0 o PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Products should be located in the sideways direction (Length: a<b) to the mechanical stress. a b ChipSoldering Commonand Mode Choke Coil Mounting Chip Common Mode Choke Coil Poor example 2. Solder Paste Printing and Adhesive Application When reflow soldering the chip common mode choke coils, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. Series PLT10H When flow soldering the chip common mode choke coils, apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. Solder Paste Printing oGuideline of solder paste thickness: 150-200m: PLT10H For the solder paste printing pattern, use standard land dimensions. *Solderability is subject to reflow conditions and thermal conductivity. Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. Microwave Absorber Block Type EMIFILr Good example !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 210 PLp Chip Common Mode Choke Coil Soldering and Mounting (1) Soldering Methods Use reflow soldering methods only. Use standard soldering conditions when soldering chip common mode choke coils. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. Flux: o Use Rosin-based flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. Chip Ferrite Bead 3. Standard Soldering Conditions For additional mounting methods, please contact Murata. (2) Soldering Profile oReflow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) Chip EMIFILr Temperature (C) T4 T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile t2 time (s) Temp. (T1) PLT10H Limit Profile Peak Cycle Temperature of Reflow (T2) Time. (t1) Heating 220C min. 30 to 60s 2503C (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating: 150C 60s min. Soldering iron power output / Tip diameter: 80W max. / o3mm max. Temperature of soldering iron tip / Soldering time / Times: 400C max. / 5s / 2 times 2 times max. Heating Temp. (T3) Time. (t2) 230C min. 60s max. Peak Cycle Temperature of Reflow (T4) 260C/10s 2 times max. Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. Chip Common Mode Choke Coil Mounting ChipSoldering Commonand Mode Choke Coil Standard Profile Series Block Type EMIFILr 90s30s 4. Cleaning Microwave Absorber Do not clean after soldering. If cleaning, please contact us. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 211 DL p Packaging Chip Common Mode Choke Coil Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape <Paper> 1.750.1 <Embossed> c DLP0QS d 3.50.05 8.0 a Chip Ferrite Bead 2.00.05 1 4.00.1 4.00.1 o1.5 +0.1 -0 c c Direction of Feed b 1 DLM11G/DLP0QS: 2.00.05 DLP0NS: 2.00.1 c: Depth of Cavity (Embossed Tape) c: Total Thickness of Tape (Paper Tape) Dimension of the cavity of embossed tape is measured at the bottom side. Chip EMIFILr a b c o180mm Reel d o330mm Reel Paper Tape Embossed Tape Paper Tape Embossed Tape Bulk DLM11G 1.45 1.2 0.8 max. - 10000 - - - 1000 DLM11S 1.4 1.15 0.65 0.25 - 4000 - - 500 DLP0QS 0.73 0.6 0.55 max. - 15000 - - - 500 DLP0NS 0.95 0.75 0.55 0.25 - 10000 - - 500 DLP11S 1.4 1.2 0.98 0.25 - 3000 - - 500 DLP11R 1.4 1.15 0.7 0.25 - 4000 - - 500 DLP11T 1.35 1.1 0.45 0.25 - 5000 - - 500 DLP1ND 1.7 0.84 0.57 0.25 - 5000 - - 500 DLP2AD 2.2 1.2 0.98 0.25 - 3000 - - 500 DLP31D/31S 3.5 1.9 1.3 0.25 - 3000 - - 500 DLW21S 2.25 1.45 1.4 0.3 - 2000 - - 500 DLW21H 2.3 1.55 1.1 0.25 - 3000 - - 500 DLW31S 3.6 2.0 2.1 0.3 - 2000 - - 500 (in mm) 2.00.05 8.00.1 4.00.1 o1.5 +0.1 -0 1.750.1 Minimum Quantity and Dimensions of 12mm Width Embossed Tape c 1 0.4 b 12.0 a Block Type EMIFILr Part Number 5.50.05 Chip Common Mode Choke Coil Packaging Chip Common Mode Choke Coil Minimum Qty. (pcs.) Dimensions Part Number Direction of feed 1 DLW43/DLW5AT: 0.3 c: Depth of Cavity Dimension of the cavity is measured at the bottom side. Dimensions Minimum Qty. (pcs.) o180mm Reel o330mm Reel Bulk a b c DLW43SH_XK 4.9 3.6 2.7 500 2500 100 DLW43SH_XP 4.9 3.6 2.9 500 2500 100 DLW5AH 5.4 4.1 4.4 400 1500 100 DLW5AT 5.4 4.1 2.7 700 2500 100 DLW5BS 5.5 5.4 4.7 400 1500 100 DLW5BT 5.5 5.5 2.7 700 2500 100 Microwave Absorber (in mm) "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity." !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 212 PL p Chip Common Mode Choke Coil Packaging Minimum Quantity and Dimensions of 24mm Width Embossed Tape 1.750.1 11.750.1 a b d 24.00.2 +0.1 o1.5-0 2.00.1 Chip Ferrite Bead 4.00.1 12.00.1 c Direction of Feed Part Number PLT10H Dimensions Minimum Qty. (pcs.) a b c d o180mm Reel o330mm Reel Bulk 13.5 6.8 9.4 0.5 125 500 50 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Packaging Chip Common Mode Choke Coil (in mm) Chip EMIFILr Dimension of the cavity is measured at the bottom side. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 213 Chip Ferrite Bead DL p Chip Common Mode Choke Coil Design Kits Microwave Absorber Block Type EMIFILr Chip Common Mode Design KitsChoke Coil Chip Common Mode Choke Coil Chip EMIFILr oEKEMDL21AQ-KIT (Chip Common Mode Choke Coils) No. Part Number Quantity (pcs.) Common Mode Impedance (at 100MHz, 20 degrees C) Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 DLW21HN670SQ2 DLW21HN900SQ2 DLW21HN121SQ2 DLW21HN181SQ2 DLW21HN670HQ2 DLW21HN900HQ2 DLW21HN121HQ2 DLW21SN501SK2 DLW21SN670SQ2 DLW21SN900SQ2 DLW21SN121SQ2 DLW21SN181SQ2 DLW21SN261SQ2 DLW21SN371SQ2 DLW21SN670HQ2 DLW21SN900HQ2 DLW21SN121HQ2 DLW21SR670HQ2 DLW21SN181XQ2 DLW21SN261XQ2 DLW21SN491XQ2 DLP0NSC280HL2 DLP0NSN350HL2 DLP0NSN670HL2 DLP0NSN900HL2 DLP0NSN121HL2 DLP0NSA070HL2 DLP0NSA150HL2 DLP0QSN600HL2 DLP0QSA070HL2 DLP0QSA150HL2 DLP0QSA350HL2 DLP1NDN350HL4 DLP1NDN670HL4 DLP1NDN900HL4 DLP11SA350HL2 DLP11SA670HL2 DLP11SA900HL2 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6725% 9025% 12025% 18025% 6725% 9025% 12025% 50025% 6725% 9025% 12025% 18025% 26025% 37025% 6725% 9025% 12025% 6725% 18025% 26025% 49025% 2820% 3510 6720% 9020% 12020% 72 155 6025% 72 155 3510 3520% 6720% 9020% 3520% 6720% 9020% 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 DLP11SN670SL2 DLP11SN121SL2 DLP11SN161SL2 DLP11SN900HL2 DLP11SN201HL2 DLP11SN241HL2 DLP11SN281HL2 DLP11SN331HL2 DLP11RB150UL2 DLP11RB400UL2 DLP11RN450UL2 DLP11TB800UL2 DLP2ADA350HL4 DLP2ADA670HL4 DLP2ADA900HL4 DLP2ADN670HL4 DLP2ADN900HL4 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6720% 12020% 16020% 9020% 20020% 24020% 28020% 33020% 155 4010 4525% 8025% 50 50 50 50 20 20 20 50 50 50 50 50 50 50 20 20 20 20 20 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 330 330 280 250 240 220 200 250 400 330 370 330 300 280 320 280 280 400 240 220 190 100 100 110 100 90 100 100 50 100 100 100 100 80 60 170 150 150 180 140 120 150 110 100 90 80 100 100 100 100 3520% 6720% 9020% 6720% 9020% 5 5 5 5 5 150 130 120 140 130 Continued on the following page. !Note 214 * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. DLp Chip Common Mode Choke Coil Design Kits 56 57 58 59 60 61 62 Part Number DLP2ADN121HL4 DLP2ADN161HL4 DLP2ADN201HL4 DLP2ADN241HL4 DLP2ADN281HL4 DLM11SN450HY2 DLM11SN900HY2 Quantity (pcs.) Common Mode Impedance (at 100MHz, 20 degrees C) Rated Voltage (Vdc) Rated Current (mA) 10 10 10 10 10 10 10 12020% 16020% 20020% 24020% 28020% 4525% 9025% 5 5 5 5 5 5 5 120 100 90 80 80 100 100 No. Part Number Quantity (pcs.) Common Mode Impedance (at 100MHz, 20 degrees C) Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 DLW5AHN402SQ2 DLW5ATN111SQ2 DLW5ATN401SQ2 DLW5ATN501SQ2 DLW5ATN851SQ2 DLW5ATN272SQ2 DLW5BSM501TQ2 DLW5BSM601TQ2 DLW5BSM801TQ2 DLW5BSM191SQ2 DLW5BSM351SQ2 DLW5BSM102SQ2 DLW5BSM152SQ2 DLW5BSM302SQ2 DLW5BTM101SQ2 DLW5BTM251SQ2 DLW5BTM501SQ2 DLW5BTM102SQ2 DLW5BTM142SQ2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 4000 (Typ.) 110 (Typ.) 400 (Typ.) 500 (Typ.) 850 (Typ.) 2700 (Typ.) 500 (Typ.) 600 (Typ.) 800 (Typ.) 190 (Typ.) 350 (Typ.) 1000 (Typ.) 1500 (Typ.) 3000 (Typ.) 100 (Typ.) 250 (Typ.) 500 (Typ.) 1000 (Typ.) 1400 (Typ.) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 200 5000 2000 1500 1500 1000 1000 1400 2000 5000 2000 1500 1000 500 6000 5000 4000 2000 1500 Chip EMIFILr oEKEMDCC5AF-KIT (Chip Common Mode Choke Coils for DC Power Lines / SMD Block Type EMIFILr for Power Lines) oEKEMDL5AAC-KIT (Chip Common Mode Choke Coils for DC Power Lines / SMD Block Type EMIFILr for Power Lines / 105 degree C available Type) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 DLW5ATN500MQ2 DLW5ATN151MQ2 DLW5ATN331MQ2 DLW5ATN501MQ2 DLW5ATN112MQ2 DLW5ATN111TQ2 DLW5ATN231TQ2 DLW5ATN401TQ2 DLW5ATN501TQ2 DLW5BTM101TQ2 DLW5BTM251TQ2 DLW5BTM501TQ2 DLW5BTM102TQ2 DLW5BTM142TQ2 DLW5BSM501TQ2 DLW5BSM601TQ2 DLW5BSM801TQ2 Quantity (pcs.) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Common Mode Impedance (at 100MHz, 20 degrees C) 50 (Typ.) 150 (Typ.) 330 (Typ.) 500 (Typ.) 1100 (Typ.) 110 (Typ.) 230 (Typ.) 400 (Typ.) 500 (Typ.) 100 (Typ.) 250 (Typ.) 500 (Typ.) 1000 (Typ.) 1400 (Typ.) 500 (Typ.) 600 (Typ.) 800 (Typ.) Rated Voltage (Vdc) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Rated Current (mA) 6000 5000 4000 2500 2000 5000 4000 2500 2000 6000 5000 4000 2500 2000 1000 1400 2000 Block Type EMIFILr Part Number Microwave Absorber No. Chip Common Mode Choke Coil Design KitsChoke Coil Chip Common Mode No. Chip Ferrite Bead Continued from the preceding page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 215 Chip Ferrite Bead PL p Large Current Common Mode Choke Coils (Automotive Available) Design Kits No. Part Number Quantity (pcs.) Common Mode Impedance (at 10MHz, 20 degrees C) Rated Voltage (Vdc) Rated Current (A) 1 2 3 4 5 6 PLT10HH450180PN PLT10HH101150PN PLT10HH401100PN PLT10HH501100PN PLT10HH9016R0PN PLT10HH1026R0PN 2 2 2 2 2 2 45 (Typ.) 100 (Typ.) 400 (Typ.) 500 (Typ.) 900 (Typ.) 1000 (Typ.) 300 300 100 100 100 100 18 15 10 10 6 6 No. Part Number Quantity (pcs.) Insertion Loss Rated Voltage (Vdc) Rated Current (A) 7 8 9 10 11 12 13 14 15 BNX002-01 BNX003-01 BNX005-01 BNX012-01 BNX016-01 BNX022-01 BNX023-01 BNX024H01 BNX025H01 1 1 1 1 1 2 2 2 2 1MHz to 1GHz : 40dB min. 5MHz to 1GHz : 40dB min. 1MHz to 1GHz : 40dB min. 1MHz to 1GHz : 40dB min. 100kHz to 1GHz : 40dB min. 1MHz to 1GHz : 35dB min. 1MHz to 1GHz : 35dB min. 100kHz to 1GHz : 35dB min. 50kHz to 1GHz : 35dB min. 50 150 50 50 25 50 100 50 25 10 10 15 15 15 10 15 15 15 Microwave Absorber Block Type EMIFILr Chip Common Mode Design KitsChoke Coil Chip Common Mode Choke Coil Chip EMIFILr oEKEPBLCKAD-KIT !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 216 Chip Ferrite Bead BNX 218 Function Example 218 Product Detail 221 !Caution/Notice 225 Soldering and Mounting 227 Packaging 231 Design Kits 232 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Series Line Up Chip EMIFILr Block Type EMIFILr !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. BNX Type p221 Chip Ferrite Bead SMD Type for Power Lines p223 Lead Type for Power Lines p224 Lead Type Low Profile for Power Lines Chip EMIFILr Series Line Up / Function Example Block Type EMIFILr Part Number Thickness (mm) Rated Voltage Effective Frequency Range Rated Current BNX022-01 BNX023-01 BNX024H01 BNX025H01 BNX002-01 BNX003-01 BNX005-01 BNX012-01 BNX016-01 3.1 3.1 3.5 3.5 18.0 18.0 18.5 8.0 8.0 50Vdc 100Vdc 50Vdc 25Vdc 50Vdc 150Vdc 50Vdc 50Vdc 25Vdc 1MHz to 1GHz:35dB min. 1MHz to 1GHz:35dB min. 100kHz to 1GHz:35dB min. 50kHz to 1GHz:35dB min. 1MHz to 1GHz:40dB min. 5MHz to 1GHz:40dB min. 1MHz to 1GHz:40dB min. 1MHz to 1GHz:40dB min. 100kHz to 1GHz:40dB min. 10A 15A 15A 15A 10A 10A 15A 15A 15A Suppression of Radiation Noise from Power Line Cable Antenna Test Board DC-DC Converter Chip Common Mode Choke Coil BNX012 AC Adaptor OUT 5V IN 12V Power Circuit (SW) 12Vdc Clock Drive (30MHz) 100F Cable AC100V Power Block Digital Block cTest Result With BNX012-01 70 60 60 Level (dBuV/m) Level (dBuV/m) Block Type EMIFILr Without Filter 70 50 40 30 20 50 40 30 20 10 10 0 200 400 600 1000 0 200 400 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 218 600 Frequency (MHz) Microwave Absorber Frequency (MHz) 800 800 1000 BNX Function Example Impulse Noise Countermeasure CB 60dB (40dB+20dB) ATT PSG Chip Ferrite Bead +B Impulse Noise Generator: INS-4420 (4kV, 50nsec) Oscilloscope: TDS7254 CG BNX Chip EMIFILr cWithout Filter Applied Impulse Voltage: 4kV/50nS Y-AXIS: 1kV/div 4kV Chip Common Mode Choke Coil cWith Filter BNX012-01 ESD Countermeasure BNX022-01 Block Type EMIFILr BNX002-01 ESD Waveform Comparison 5000 3000 Initial 2000 Microwave Absorber Wave Voltage (V) 4000 1000 with BNX022-01 0 -1000 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 Time (nsec) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 219 EMI Suppression Effect BNX Series Suppression of Ripple Noise of DC Side in the Switching Power Supply Test Circuit Chip Ferrite Bead BNX002-01 +5V Switching Power Supply CG Type of Filter EMI Suppression Effect / Description There is high frequency noise of 0.5V maximum. Chip EMIFILr Without Filter +5.0V 50s/div 0.2V/div Chip Common Mode Choke Coil BNX002-01 can suppress most of the noise. When BNX002-01 is used +5.0V 50s/div 0.2V/div Example of Impulse Noise Suppression Block Type EMIFILr Type of Filter EMI Suppression Effect Impulse Noise 2000V/50ns Without Filter Microwave Absorber Y-axis: 500V/div X-axis: 10ns/sec When BNX002 is used Y-axis: 500V/div X-axis: 10ns/sec !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 220 BNX Series Power Lines Type Block Type EMIFILr BNX02p BNX02p Series SMD package of block type EMIFILr. c Equivalent Circuit L1 (1) * Part Number Appearance (4) BNX022-01 BNX022 BNX023-01 BNX023 BNX02p* 1.60.3 (4) 1.30.2 (4) 7.00.2 1.550.2 4.20.3 (3) (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B (2) c Packaging Code Packaging : Electrode 2.50.2 1.550.2 L 180mm Reel Embossed Tape 400 K 330mm Reel Embossed Tape 1500 B Bulk(Bag) 100 (in mm) (4) c Equivalent Circuit L1 (1) 9.10.2 * Part Number Appearance (4) BNX024H01 BNX024 BNX025H01 BNX025 BNX02p* 1.60.3 1.050.2 4.20.3 (3) C2 CB (2) 1.00.3 C1 L2 CG (4) (3) PSG (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B (2) c Packaging Code Packaging (4) (2) 0.30.1 (1) (4) (4) 7.00.2 1.550.2 1.30.2 0.30.1 (3) (2.45) (1) L3 B (2) 3.50.2 (3) Minimum Quantity (4) c Dimensions 12.10.2 (1) CG (4) (3) PSG : Electrode 2.50.2 1.550.2 Minimum Quantity L 180mm Reel Embossed Tape 400 K 330mm Reel Embossed Tape 1500 B Bulk(Bag) 100 (in mm) (4) Refer to pages from p.227 to p.228 for mounting information. c Rated Value (p: packaging code) Rated Voltage Withstand Voltage Insulation Resistance (min.) Rated Current Insertion Loss (Line impedance=50 ohm) BNX022-01p 50Vdc 125Vdc 10A 500M ohm 1MHz to 1GHz:35dB min. BNX023-01p 100Vdc 250Vdc 15A 500M ohm 1MHz to 1GHz:35dB min. BNX024H01p 50Vdc 125Vdc 15A 100M ohm 100kHz to 1GHz:35dB min. BNX025H01p 25Vdc 62.5Vdc 15A 50M ohm 50kHz to 1GHz:35dB min. Power Lines Type Block Type EMIFILr Part Number Operating Temperature Range: -40C to +125C (BNX022/BNX023), -55C to +125C (BNX024H/BNX025H) c Insertion Loss Characteristics BNX022/023 BNX024H01 0 0 BNX022-01 BNX023-01 20 40 60 80 40 Microwave Absorber Insertion Loss (dB) Insertion Loss (dB) 20 60 80 100 0.01 0.1 1 10 Frequency (MHz) Chip EMIFILr 1.00.3 BNX024H/BNX025H CB (2) C1 L2 (2) 0.30.1 (1) C2 Chip Common Mode Choke Coil 0.30.1 (3) (2.45) (1) 1.050.2 3.10.2 (3) L3 B (2) 9.10.2 (1) Chip Ferrite Bead c Dimensions 12.10.2 BNX022/BNX023 100 1000 100 0.01 0.1 1 10 Frequency (MHz) 100 1000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 221 BNX Series Power Lines Type Block Type EMIFILr BNX02pSeries BNX02p c Insertion Loss Characteristics BNX025H01 20 BNX025H01 BNX026H01 Insertion Loss (dB) Chip Ferrite Bead 0 40 60 80 0.1 1 10 Frequency (MHz) 100 1000 c Notice (Rating) In operating temperature exceeding +85C, derating of current is necessary for BNX022 series. Please apply the derating curve shown in chart according to the operating temperature. In operating temperature exceeding +85C, derating of current is necessary for BNX023 series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Derating of Rated Current Rated Current (A) Rated Current (A) 15 10 1 0 -40 85 125 Operating Temperature (C) 1 0 -40 85 125 Operating Temperature (C) In operating temperature exceeding +85C, derating of current is necessary for BNX024H/025H series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current 15 Microwave Absorber Rated Current (A) Block Type EMIFILr Power Lines Type Chip Common Mode Choke Coil Chip EMIFILr 100 0.01 1 0 -40 85 125 Operating Temperature (C) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 222 BNX Series Power Lines Type Block Type EMIFILr BNX00p BNX00p Series Large insertion loss from several hundred kHz to several GHz. 12.00.5 c Equivalent Circuit L1 11.00.5 0.8 0.1 18 max. o0.8 CG o0.8 0.6 0.1 c Packaging PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias B Code Packaging Minimum Quantity - Box 100 (in mm) c Dimensions BNX005 2.50.2 12.00.5 c Equivalent Circuit L1 11.00.5 13.5 max. 18.5 max. 0.8 0.1 5.00.5 3.51.0 (1) o1.0 CG PSG CG (4) (3) PSG o1.0 CB (2) C1 (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B o1.0 0.6 0.1 2.50.2 2.50.2 CB CG C2 L2 2.50.2 7.50.2 L3 B B c Packaging PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias Code Packaging Minimum Quantity - Box 100 (in mm) Refer to pages from p.229 to p.230 for mounting information. Rated Voltage Withstand Voltage Rated Current Insulation Resistance (min.) Insertion Loss (Line impedance=50 ohm) BNX002-01 50Vdc 125Vdc 10A 100M ohm 1MHz to 1GHz:40dB min. BNX003-01 150Vdc 375Vdc 10A 100M ohm 5MHz to 1GHz:40dB min. BNX005-01 50Vdc 125Vdc 15A 100M ohm 1MHz to 1GHz:40dB min. Power Lines Type Block Type EMIFILr c Rated Value Part Number Operating Temperature Range: -30C to +85C c Insertion Loss Characteristics (50 - 50) 0 BNX003-01 20 BNX002-01 (BNX005-01) 40 60 Microwave Absorber Insertion Loss (dB) Chip EMIFILr PSG CG (4) (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B 2.50.2 CB CG CB (2) C1 (3) PSG 2.50.2 7.50.2 C2 Chip Common Mode Choke Coil o0.8 L3 B L2 5.00.5 3.51.0 13 max. (1) Chip Ferrite Bead c Dimensions BNX002/BNX003 80 100 0.001 0.01 0.1 1 Frequency (MHz) 10 100 1000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 223 BNX Series Power Lines Type Block Type EMIFILr BNX01p BNX01p Series Low profile version of BNX series. c Dimensions c Equivalent Circuit L1 11.00.2 12.00.2 8.00.5 0.8 0.1 0.8 0.1 7.50.2 12.00.5 3.20.5 BNX*** 4.00.5 Chip Ferrite Bead (1) L3 C2 B L2 CG (4) (3) PSG o0.8 0.1 2.50.2 CB (2) C1 (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B o0.8 0.1 0.6 0.1 2.50.2 *** : 012/016 PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias CB CG CG PSG B c Packaging Code Packaging Minimum Quantity - Box 150 (in mm) Chip EMIFILr Refer to pages from p.229 to p.230 for mounting information. c Rated Value Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance (min.) Insertion Loss (Line impedance=50 ohm) BNX012-01 50Vdc 125Vdc 15A 500M ohm 1MHz to 1GHz:40dB min. BNX016-01 25Vdc 62.5Vdc 15A 50M ohm 100kHz to 1GHz:40dB min. c Insertion Loss Characteristics c Notice (Rating) (50 - 50) 0 20 40 In operating temperature exceeding +85C, derating of current is necessary for BNX01p series. Please apply the derating curve shown in chart according to the operating temperature. BNX012-01 60 Derating of Rated Current BNX016-01 80 Block Type EMIFILr Power Lines Type 100 0.001 0.01 0.1 1 Frequency (MHz) 10 100 1000 Rated Current (A) Insertion Loss (dB) Chip Common Mode Choke Coil Operating Temperature Range: -40C to +125C 15 10 5 1 0 -40 85 102.5 120 125 Operating Temperature (C) o Connecting power line In case of using power line, please connect to each terminal as shown. Power Supply (BNX Input) Power Supply +Bias Microwave Absorber Power Supply Ground Power Supply -Bias Power Supply Ground BNX Circuit (BNX Output) B PSG CB CG Load Circuit +Bias B PSG CB CG Load Circuit -Bias Load Circuit Ground Load Circuit Ground !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 224 Block Type EMIFILr SMD Type !Caution/Notice !Caution o Rating Chip Ferrite Bead Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o Storage and Operating Conditions o Handling <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period BNX series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Resin Coating Using resin for coating/molding products may affect the products performance. So please pay careful attention in selecting resin. Prior to use, please make the reliability evaluation with the product mounted in your application set. 2. Handling of a Substrate (for BNX02p) After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. Twisting Chip Common Mode Choke Coil Bending Chip EMIFILr Notice o Notice (Soldering and Mounting) Microwave Absorber Block Type EMIFILr Block Type EMIFILr !Caution/Notice 1. Cleaning Do not clean BNX series (SMD Type). Before cleaning, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 225 Block Type EMIFILr Lead Type !Caution/Notice !Caution Notice o Storage and Operating Conditions <Operating Environment> 1. Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 2. Do not use products near water, oil or organic solvents. <Storage and Handling Requirements> 1. Storage Period BNX Series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Block Type EMIFILr !Caution/Notice Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr Chip Ferrite Bead o Rating Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o Notice (Soldering and Mounting) 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters "EMIFIL" may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. Microwave Absorber o Notice (Appearance) Although some part of the product surface seems to be white in some cases, do not care because it is the result of waxing process for humidity resistance improvement. This wax does not make bad affection to mechanical or electrical performance, reliability of the product. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 226 BNX SMD Type Block Type EMIFILr Soldering and Mounting 1. Standard Land Pattern Dimensions CG 2.8 2.3 B CB PSG CG CG 17.5 13.2 13.7 10.3 5.8 3.8 0 0 o PCB Warping (for BNX02p) PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Chip EMIFILr 12.5 10.2 9.9 9.6 7.1 6.2 5.3 (1) A double-sided print board (or multilayer board) as shown in the left figure is designed, and please apply a soldering Cu electrode with a product electrode to a "Land Pattern", apply resist to a "Land Pattern + Solder Resist" at Cu electrode. (2) This product is designed to meet large current. Please design PCB pattern which is connected to this product not to become too hot by applied large current. (3) Please drop CG on a ground electrode on the back layer (the same also in a multilayer case) by the through hole. And a surface to ground electrode layer may also take a large area as much as possible. (4) It is recommended to use a double-sided printed circuit board with BNX mounting on one side and the ground pattern on the other in order to maximize filtering performance, multiple feed through holes are required to maximize the BNX's connection to ground. (5) The ground pattern should be designed to be as large as possible to achieve maximum filtering performance. Products should be located in the sideways direction (Length: a<b) to the mechanical stress. Chip Common Mode Choke Coil BNX022 BNX023 BNX024 BNX025 (in mm) a b Poor example Good example 2. Solder Paste Printing and Adhesive Application damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. When reflow soldering the block type EMIFILr, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to Series Adhesive Application oGuideline of solder paste thickness: 150-200m 12.5 CB PSG CG CG 5.8 3.8 0 0 17.5 2.8 2.3 B 13.7 7.1 5.3 Microwave Absorber CG 10.2 9.6 10.3 BNX022 BNX023 BNX024 BNX025 Solder Paste Printing Block Type EMIFILr Soldering andEMIFILr Mounting Block Type Land Pattern Solder Resist Through Hole Chip Ferrite Bead Land Pattern + Solder Resist !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 227 BNX Block Type EMIFILr SMD Type Soldering and Mounting Chip Ferrite Bead 3. Standard Soldering Conditions (1) Soldering Methods Use reflow soldering methods only. Use standard soldering conditions when soldering block type EMIFILr SMD type. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. Flux: o Use Rosin-based flux. In case of using RA type solder, products should be cleaned completely with no residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. For additional mounting methods, please contact Murata. (2) Soldering Profile oReflow Soldering Profile (Sn-3.0Ag-0.5Cu solder) Temperature (C) Chip EMIFILr T4 T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile t2 90s30s Time (s) BNX022/023/024/025 Limit Profile Peak Heating Cycle Temperature of Reflow (T2) Time. (t1) Temp. (T1) 220C min. 30 to 60s 2503C (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating: 150C 60s min. Soldering iron power output: 100W max. Temperature of soldering iron tip / Soldering time / Times: 450C max. / 5s max. / 2 time 2 times max. Temp. (T3) Peak Cycle Temperature of Reflow (T4) Time. (t2) 230C min. 60s max. Heating 4. Cleaning Do not clean BNX022/023/024/025 series. In case of cleaning, please contact Murata engineering. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 228 260C/10s 2 times max. Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. Microwave Absorber Block Type Soldering andEMIFILr Mounting Block Type EMIFILr Chip Common Mode Choke Coil Standard Profile Series BNX Block Type EMIFILr Lead Type Soldering and Mounting 1. Mounting Hole Mounting holes should be designed as specified below. BNX00p/01p Component Side Terminal Layout (Bottom figure) (CG) (CG) (CG) 2.50.1 Chip Ferrite Bead (B) 2.50.1 2.50.1 o1.2 (PSG) CB CG CG (CB) 5.00.1 7.50.1 PSG B PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias Use a bilateral P.C. board. Insert the BNX into the P.C.board until the root of the terminal is secured, then solder. PSG (2) Bottom View B B PSG B PSG Shield plate PSG CG B CG CG CG CB CG CB CG Block Type EMIFILr Soldering andEMIFILr Mounting Block Type Copper foil pattern Recommended Land Pattern 3.2 3.2 Through holes o1.2 B Chip Common Mode Choke Coil (1) Component Side View PSG 2.5 CG CG Microwave Absorber (2) Self-heating Though this product has a large rated current, localized selfheating may be caused depending on soldering conditions. To avoid this, attention should be paid to the following: (a) Use P.C. board with our recommendation on hole diameter / land pattern dimensions, mentioned in the right hand drawing, especially for 4 terminals which pass current. (b) Solder the terminals to the P.C. board with soldercover area at least 90%. Otherwise, excess self-heating at connection between terminals and P.C. board may lead to smoke and / or fire of the product even when operating at rated current. (c) After installing this product in your product, please make sure the self-heating is within the rated current recommended. P. C. Board Patterns 2.5 (1) How to use effectively This product effectively prevents undesired radiation and external noise from going out / entering the circuit by grounding the high frequency components which cause noise problems. Therefore, grounding conditions may affect the performance of the filter and attention should be paid to the following for effective use. (a) Design maximized grounding area in the P.C. board, and grounding pattern for all the grounding terminals of the product to be connected. (Please follow the specified recommendations.) (b) Minimize the distance between ground of the P.C. board and the ground plate of the product. (Recommend using the through hole connection between grounding area both of component side and bottom side.) (c) Insert the terminals into the holes on P.C. board completely. (d) Don't connect PSG terminal with CG terminal directly. (See the item 1. Terminal Layout) Chip EMIFILr 2. Using the Block Type EMIFILr (Lead Type) Effectively CG CB 3.2 (in mm) 2.5 5.0 Copper foil pattern 7.5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 229 BNX Block Type EMIFILr Lead Type Soldering and Mounting Chip Ferrite Bead 3. Soldering (1) Use Sn-3.0Ag-0.5Cu solder. (2) Use Rosin-based flux. Do not use strong acidic flux with halide content exceeding 0.2wt% (chlorine conversion value). (3) Products and the leads should not be subjected to any mechanical stress during the soldering process, or while subjected to the equivalent high temperatures. (4) Standard flow soldering profile Pre-heating Chip EMIFILr Temperature (C) 300 200 150 150C 100 50 60s min. Solder Chip Common Mode Choke Coil Gradual Cooling (in air) Soldering Temperature 250 Sn-3.0Ag-0.5Cu solder Soldering Time Soldering Temperature Soldering Time 250 to 260C 4 to 6s 4. Cleaning Clean the block Type EMIFILr(Lead Type) in the following conditions. (1) Cleaning temperature should be limited to 60C max. (40C max for alcohol type cleaner). (2) Ultrasonic cleaning should comply with the following conditions, avoiding the resonance phenomenon at the mounted products and P.C.B. Power: 20W/liter max. Frequency: 28 to 40kHz Time: 5 min. max. (3) Cleaner (a) Alcohol type cleaner Isopropyl alcohol (IPA) (b) Aqueous agent Pine Alpha ST-100S (4) There should be no residual flux or residual cleaner left after cleaning. In the case of using aqueous agent, products should be dried completely after rinsing with de-ionized water in order to remove the cleaner. (5) The surface of products may become dirty after cleaning, but there is no deterioration on mechanical, electrical characteristics and reliability. (6) Other cleaning: Please contact us. Microwave Absorber Block Type Soldering andEMIFILr Mounting Block Type EMIFILr Soldering !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 230 BNX Block Type EMIFILr SMD Type Packaging Minimum Quantity and Dimensions of 24mm Width Embossed Tape 4.0x10pitch=40.00.2 +0.1 -0 c: 3.50.1 a: 12.40.1 11.50.1 12.00.1 c: Depth of Cavity Chip Ferrite Bead o1.5 24.00.2 2.00.1 1.750.1 4.00.1 3.30.1 3 max. o1.5 +0.5 -0 0.30.1 b: 9.40.1 Minimum Qty. (pcs.) o180mm Reel o330mm Reel b c 12.4 9.4 3.5 400 4.0x10pitch=40.00.2 o1.5 +0.1 -0 3.60.1 o1.5 100 c: 3.60.1 a: 12.40.1 11.50.1 12.00.1 Bulk 24.00.2 2.00.1 1.750.1 4.00.1 1500 Chip EMIFILr BNX022/023 Dimensions a Chip Common Mode Choke Coil Part Number Dimension of the cavity is measured at the bottom side. +0.5 -0 0.30.1 b: 9.40.1 Part Number BNX024/025 Dimensions a b c 12.4 9.4 3.6 Minimum Qty. (pcs.) o180mm reel o330mm reel 400 1500 Bulk 100 Microwave Absorber (in mm) Block Type EMIFILr BlockPackaging Type EMIFILr Dimension of the cavity is measured at the bottom side. "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity." !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 231 Chip Ferrite Bead BNX Block Type EMIFILr Design Kits No. Part Number Quantity (pcs.) Common Mode Impedance (at 10MHz, 20 degrees C) Rated Voltage (Vdc) Rated Current (A) 1 2 3 4 5 6 PLT10HH450180PN PLT10HH101150PN PLT10HH401100PN PLT10HH501100PN PLT10HH9016R0PN PLT10HH1026R0PN 2 2 2 2 2 2 45 (Typ.) 100 (Typ.) 400 (Typ.) 500 (Typ.) 900 (Typ.) 1000 (Typ.) 300 300 100 100 100 100 18 15 10 10 6 6 No. Part Number Quantity (pcs.) Insertion Loss Rated Voltage (Vdc) Rated Current (A) 7 8 9 10 11 12 13 14 15 BNX002-01 BNX003-01 BNX005-01 BNX012-01 BNX016-01 BNX022-01 BNX023-01 BNX024H01 BNX025H01 1 1 1 1 1 2 2 2 2 1MHz to 1GHz : 40dB min. 5MHz to 1GHz : 40dB min. 1MHz to 1GHz : 40dB min. 1MHz to 1GHz : 40dB min. 100kHz to 1GHz : 40dB min. 1MHz to 1GHz : 35dB min. 1MHz to 1GHz : 35dB min. 100kHz to 1GHz : 35dB min. 50kHz to 1GHz : 35dB min. 50 150 50 50 25 50 100 50 25 10 10 15 15 15 10 15 15 15 Microwave Absorber Block Type EMIFILr Design Kits Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr oEKEPBLCKAD-KIT !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 232 Chip Ferrite Bead EA 234 Product Detail 235 Notice 238 Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Part Numbering Chip EMIFILr Microwave Absorber !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EA Chip Ferrite Bead (Part Number) Part Numbering Microwave Absorber EA 1026 A 160 M 200 200 q w e r t y u qProduct ID Product ID EA Microwave Absorber tUnit of Dimension One capital letter expresses Unit of Dimension (y) and Dimensions Length (u). Chip EMIFILr wSheet Type Code Sheet Type 10pp Iron carbonyl type (UL certified type/Halogen Free type) 2070 Metal Flake Powder (Halogen Free type) 2100 Metal Flake Powder (UL certified type) 3008 Magnetic material (UL certified type/Halogen Free type) Code Unit of Dimension M in mm (Standard) C in cm (Standard) Standard shape is a rectangle. Please contact us for other shapes. yDimension (Length) Expressed by 3 digits including the first decimal place. Chip Common Mode Choke Coil eAdhesive Tape Type Code Adhesive Tape Type A Standard tape type (Halogen Free type) B Thin Adhesive tape type (Halogen Free type) L No tape type U UL certified type (Halogen Free type) uDimension (Width) Expressed by 3 digits including the first decimal place. Ex.) Code Dimension (Length g Width) M300150 30.0g15.0 mm C150100 15.0g10.0 cm rSheet Thickness Expressed by 3 digits including the second decimal place in mm. Code Sheet Thickness 020 0.20mm Microwave Absorber Block Type EMIFILr Ex.) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 234 EA Series Microwave Absorber EA10 EA10 Chip Ferrite Bead Series c Packaging When inquiring, please contact us with size code, refering to "Part Numbering." c Rated Value Applicable Frequency (Typ.) Thickness (Typ.) Flame Class Halogen Operating Temperature Range EA1026A100 20.0GHz 1.0mm UL94V-0 Halogen Free -40C to +80C EA1026A160 11.5GHz 1.6mm UL94V-0 Halogen Free -40C to +80C EA1026A180 10.0GHz 1.8mm UL94V-0 Halogen Free -40C to +80C EA1046A180 5.8GHz 1.8mm UL94V-0 Halogen Free -40C to +80C EA1075A270 2.5GHz 2.7mm UL94V-0 Halogen Free -40C to +80C Chip EMIFILr Part Number c Reflection Loss (Typ.) Chip Common Mode Choke Coil 0 5 Reflection Loss (dB) 10 15 20 EA1026A100 25 EA1026A180 EA1075A270 EA1026A160 30 EA1046A180 35 40 2 4 6 8 10 12 Frequency (GHz) 14 16 18 20 Microwave Absorber Block Type EMIFILr 0 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 235 EA Series Microwave Absorber EA20/EA21 EA20/EA21 Chip Ferrite Bead Series c Packaging When inquiring, please contact us with size code, refering to "Part Numbering." Chip Common Mode Choke Coil Chip EMIFILr c Rated Value Part Number Applicable Frequency (Typ.) Thickness (Typ.) Flame Class Halogen Operating Temperature Range EA2070A020 0.1 to 3.0GHz 0.20mm - Halogen Free -40C to +120C EA2070A050 0.1 to 3.0GHz 0.50mm - Halogen Free -40C to +120C EA2070A100 0.1 to 3.0GHz 1.00mm - Halogen Free -40C to +120C EA2070B005 0.1 to 3.0GHz 0.05mm - Halogen Free -40C to +120C EA2070B010 0.1 to 3.0GHz 0.10mm - Halogen Free -40C to +120C EA2070B013 0.1 to 3.0GHz 0.13mm - Halogen Free -40C to +120C EA2070B020 0.1 to 3.0GHz 0.20mm - Halogen Free -40C to +120C EA2070B050 0.1 to 3.0GHz 0.50mm - Halogen Free -40C to +120C EA2100A020 0.1 to 3.0GHz 0.20mm UL94V-0 - -40C to +120C EA2100A050 0.1 to 3.0GHz 0.50mm UL94V-0 - -40C to +120C EA2100A100 0.1 to 3.0GHz 1.00mm UL94V-0 - -40C to +120C EA2100B020 0.1 to 3.0GHz 0.20mm UL94V-0 - -40C to +120C EA2100B050 0.1 to 3.0GHz 0.50mm UL94V-0 - -40C to +120C EA2100B100 0.1 to 3.0GHz 1.00mm UL94V-0 - -40C to +120C c Magnetic Permeability-Reluctance 20 12 M" 8 4 0 0.1 1.0 Frequency (GHz) 10 Microwave Absorber Block Type EMIFILr 16 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 236 EA Series Microwave Absorber EA30 EA30 Chip Ferrite Bead Series c Packaging When inquiring, please contact us with size code, refering to "Part Numbering." c Rated Value Applicable Frequency (Typ.) Thickness (Typ.) Flame Class Halogen Operating Temperature Range EA3008U025 0.1 to 3.0GHz 0.25mm UL94V-0 Halogen Free -40C to +120C EA3008U035 0.1 to 3.0GHz 0.35mm UL94V-0 Halogen Free -40C to +120C EA3008U050 0.1 to 3.0GHz 0.50mm UL94V-0 Halogen Free -40C to +120C EA3008U100 0.1 to 3.0GHz 1.00mm UL94V-0 Halogen Free -40C to +120C EA3008U250 0.1 to 3.0GHz 2.50mm UL94V-0 Halogen Free -40C to +120C Chip EMIFILr Part Number c Magnetic Permeability-Reluctance Chip Common Mode Choke Coil 10 8 M' M', M" 6 4 M" 2 1 Frequency (GHz) 10 Microwave Absorber Block Type EMIFILr 0 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 237 Notice Microwave Absorber Notice o Storage and Operating Conditions Chip Ferrite Bead 1. Adhesive Tape Stress This product is designed to use adhesive tape to hold itself to the object. And please avoid causing mechanical stress by bending or variation of the object. Products shall be located in the sideways direction to the mechanical stress. Flat cable Product Stress Poor example Good example Microwave Absorber Notice Microwave Absorber Block Type EMIFILr Chip Common Mode Choke Coil Chip EMIFILr 2. Cleaning Avoid cleaning this product. 3. Handling of the Product Adhesive tape must be clean to maintain the quality of adhesion. Please wipe off any dirt, dust and any kind of oil from the surface of the object before use. 4. Storage Conditions (1) Storage period Products that were inspected by Murata over 6 months ago should be examined and used. This can be confirmed by the inspection No. marked on the container. Adhesiveness should be checked if this period is exceeded. (2) Storage conditions * Products should be stored in the warehouse in the following conditions: Temperature: -10 to +40C Humidity: 30 to 70% relative humidity No rapid change of temperature or humidity * Products should be stored in the warehouse without heat shock condition, vibration, direct sunlight and so on. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 238 Product Guide by Size Which Size? inch (mm) Capacitor Type Inductor Type 01005 (0402) BLM02AX 0201 (0603) Simple Capacitor LC(RC) Combined Common Mode T Circuit Filter Feed Through Choke Coils Type p26 BLM03AG BLM03B BLM03P p32 p34 p27 12g11gmax13 BLM03AX BLM03E BLM03H p223 p30 p87 BNX002-01 BNX003-01 p85 025020 (0605) DLP0QS p186 03025 (0806) 0402 (1005) BLM15AG DLP0NS p187 p42 p44 p36 p90 p88 BLM15AX BLM15HD BLM15HB BLM15GG BLM15GA p40 p88 NFM15CC NFM15PC p134 NFL15ST p140 p88 p91 12g11gmax13.5 p91 p223 DLP1ND p193 (1210) DLM11G DLM11S DLP11S/11R/11T p184 0603 (1608) BLM18A BLM18T BLM18B BLM18R BLM18P BLM18K BLM18S p56 p62 p58 p63 p50 p52 p54 BLM18E BLM18HE BLM18HG BLM18HD BLM18HB BLM18HK BLM18G p96 p92 p92 NFM18CC NFM18PS NFM18PC p135 p125 0805 p80 (2012) BLM21A p68 BLM21B p70 BLM21R BLM21P 1206 (3212) (3216) BLM31P Array p75 Lead p92 p92 12g11gmax8.5 p98 p73 p66 NFM21CC NFM21PS NFM21PC p136 p128 p224 p145 p146 BNX012-01 BNX016-01 p147 NFL21SP NFR21GD p144 NFA21SL p148 p149 NFW31SP p150 p152 DLP2AD p194 DLW21S DLW21H p197 DLP31S DLW31S DLP31D p192 NFM3DCC NFM3DPC p137 NFM31PC NFM31KC p131 p199 p130 9.1g12.1gmax3.3 NFE31PT p121 p132 p83 1210 (3225) BLE32P p79 1806 (4516) BLM41P p77 1812 (4532) DLW43S p201 2014 (5036) DLW5AH DLW5AT p177 p179 p181 2020 (5050) DLW5BS DLW5BT p177 p179 p181 2606 (6816) NFA31CC NFA31GD p83 p139 p221 p200 BLA31A BLA31B NFM41CC NFM41PC Lead p129 Array 1205 p189 p190 p191 p141 p142 p143 p80 BLA2AB p185 p126 NFA18SL NFA18SD (2010) BLA2AA Array NFL18ST NFL18SP BNX005-01 p92 Array 0804 Lead p123 05025 (1506) 0504 LgWgT(mm) p24 BLM02BX BLM15B BLM15P BLM15E BLM15HG Block Type p196 p153 BNX022-01 BNX023-01 SMD p138 p133 NFE61PT 9.1g12.1gmax3.7 p221 BNX024H01 BNX025H01 SMD p122 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 239 Part Number Quick Reference BLp Series BLA2AA BLA2AB BLA31A BLA31B BLE32P BLM02AX BLM02BX BLM03AG BLM03AX BLM03B BLM03E BLM03H BLM03PG BLM03PX BLM15AG BLM15AX BLM15B BLM15BX BLM15E BLM15GA BLM15GG BLM15HB BLM15HD BLM15HG BLM15PG/PD BLM15PX BLM18A BLM18B BLM18EG BLM18G BLM18HB BLM18HD BLM18HE BLM18HG BLM18HK BLM18K BLM18P BLM18R BLM18S BLM18T BLM21A BLM21B BLM21P BLM21R BLM31P BLM41P a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a DLp (PLp) Series NFp Series p80 p80 p83 p83 p79 p24 p26 p32 p30 p34 p87 p85 p27 p28 p42 p40 p46 p44 p90 p91 p91 p88 p88 p88 p38 p36 p56 p58 p96 p98 p92 p92 p92 p92 p92 p52 p50 p63 p54 p62 p68 p70 p66 p73 p75 p77 NFA18SD NFA18SL NFA21SL NFA31CC NFA31GD NFE31PT NFE61PT NFL15ST NFL18SP NFL18ST NFL21SP NFM15CC NFM15PC NFM18CC NFM18PC NFM18PS NFM21CC NFM21PC NFM21PS NFM31KC NFM31PC NFM3DCC NFM3DPC NFM41CC NFM41PC NFR21GD NFW31SP a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a p147 p145 p148 p139 p153 p121 p122 p140 p143 p141 p144 p134 p123 p135 p126 p125 p136 p129 p128 p132 p131 p137 p130 p138 p133 p152 p150 DLM11G DLM11S DLP0NS DLP0QS DLP11S/11R/11T DLP1ND DLP2AD DLP31D DLP31S DLW21H DLW21S DLW31S DLW43S DLW5AH DLW5AT DLW5BS DLW5BT PLT10H a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a p184 p185 p187 p186 p189 p193 p194 p196 p192 p199 p197 p200 p201 p177 p179 p177 p179 p202 BNX Series BNX002 BNX003 BNX005 BNX012 BNX016 BNX022 BNX023 BNX024 BNX025 a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a p223 p223 p223 p224 p224 p221 p221 p221 p221 EA Series EA10 EA20 EA21 EA30 a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a p235 p236 p236 p237 Alphabetic Product Name Index 3 Terminal Filter p111 Chip EMIFILr LC Combined Type Array Block Type EMIFILr LC Combined Type p221 Chip EMIFILr LC Combined Wire Wound Type p150 Chip Common Mode Choke Coil Film Type p186 Chip EMIFILr RC Combined Type p152.153 Chip Common Mode Choke Coil Film Type Array p193 Chip EMIFILr RC Combined Type Array p153 Chip Common Mode Choke Coil Multilayer Type p184 Chip Ferrite Bead p13 Chip Common Mode Choke Coil Wire Wound Type p197 Chip Ferrite Bead Array p80 Chip Common Mode Choke Coil Wire Wound Type For Large Current p177 Chip Ferrite Bead For GHz Band Noise p85 Chip EMIFILr Array p80.83.139.145.148.153 Chip Ferrite Bead For High-GHz Band Noise p91 Chip EMIFILr Capacitor Type p111 Common Mode Filter p169 Chip EMIFILr Capacitor Type Array p139 EMIFILr p13.111.169.217 Chip EMIFILr Feed Through Type p121 EMI Suppression Filter p13.111.169.217 Chip EMIFILr For Large Current p27.121.123.125.177.221 LC Combined L Circuit Array p145 Chip EMIFILr Inductor Type p13 L Circuit Filter p145 Chip EMIFILr LC Combined Multilayer Type p140 Microwave Absorber p233 Chip EMIFILr LC Combined T Circuit Type p121.140 PI Circuit Filter p143.144.150 Chip EMIFILr LC Combined Type p121 T Circuit Filter p121.140 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 240 p145 Introduction of Related Catalogs: Ferrite Core, Microwave Absorber/Lead Type EMIFILr Please refer to catalogs below for ferrite cores, Microwave Absorber and leaded EMIFILr. Ferrite Core, Microwave Absorber Ferrite Corefor EMI Suppression Microwave Absorber Contents Thin Type Sandwich Core <FSSA> Core for Flat Cables <FSRC> Beads Core <FSRH> Ring Core <FSRB> Microwave Absorber <EA> This Catalog is PDF version only. Please refer to following URL. http://www.murata.com/products/catalog/pdf/o63e.pdf Lead Type EMIFILr EMI Suppression Filters (Lead Type EMIFILr) Contents Ferrite Beads Inductors <BL01/02/03> Disc Type EMIFILr<DSp6/DSp9> EMIGUARDr(EMIFILr with Varistor Function) <VFp3/VFp6/VFp9> Common Mode Choke Coils <PLT> !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 241 Please check Murata's newsletter! You can learn about electric parts with fun. http://www.murata.com/products/emicon_fun/ EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, EMI suppression filters and inductors to information can practically be used. Updated information is also distributed via the mail magazine. Click here to register as reader http://go.murata.co.jp/Email_Newsletter_EN.html You can register from Murata Manufacturing Web site page TOP. http://www.murata.com/products/ ######## ######## ######## ######## ######## ######## EMIC ######## e fun whi ON-FUN! ##### le learning about elec Th -----------tronic co ------------ e index of June 14 issue mponent -----------s - Inductor -----------Room ------------ Produc -----------tN ------- Proposal ews of the Lo ss Re - In ------------ dustry Pickup - Sm duction in the RF --------art Ph Circuit Expertly --------------------- ones written ar -----------tic --inductors les explain the ba --------------------######## and EMI sics of ca ######## pacitors, suppress ######## ion filters ######## . ######## ######## ######## ##### ====== ====== ====== ====== ====== ====== Product N ====== ews ====== ====== ====== ====== ====== ====== ====== - Large Cu ====== ====== rrent Com ====== <PLT10H mon Mod ====== series> e Coil fo r Automot 1. Meets large curre ive Availa ble nt 2. Suitabl e for surfa up to 18A max. suitable fo ce mount 3. Large r power lin comm ing. es. noise supp on mode impeda nce up to 4. Wide op ression effect. 1000ohm erat [at 10mhz ] enables [PLT10H ing temperature ra good http://new H9016R0 / 401100 nge from -55C to 125C. sletter.m / 101150 urata.co. / 45 01 80 jp/c.p?12c eLnY3hk ] email Mag azine: Hav !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 242 This banner is the entrance of register form Cat. No. C31E-26 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of March 2014. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: NFL18ST307H1A3D NFL18ST507H1A3D NFL18ST207H1A3D NFL15ST207X0J3D NFL15ST507X0J3D NFL15ST157X0J3D NFL15ST307X0J3D