Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF4034/426.0/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6 case for FRS & PMR mobile radio applications. ( Centre frequency : 426.0MHz ) 1. Package Dimension (DCC6) 2. Sign Pin Configuration 2 Input 5 Output 1,3,4,6 Ground Data (unit: mm) Sign Data (unit: mm) A 1.900.1 E 1.350.15 B 0.640.1 (x6) F 3.800.15 C 1.000.1 (x5) G 3.800.15 D 1.270.1 (x4) 3. Matching Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 4. Typical Frequency Response 5. Performance 5-1. Maximum Ratings Rating Input Power Level DC Voltage Value Unit P 0 dBm VDC 10 V Operable Temperature Range TA -10 to +65 C Storage Temperature Range Tstg -40 to +85 C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5-2. Electronic Characteristics Characteristic Minimum Typical Maximum Unit Centre Frequency fC -- 426.000 -- MHz User Signal Band BW -- 2.0 -- MHz -- 3.2 4.8 dB 35 42 45 52 --- dB -- -- 2.0 dB Insertion Loss IL fC 2.0 MHz Absolute Attenuation DC to fC -20.0MHz fC +25.0MHz to fC +200.0MHz Ripple fC 2.0 MHz Input / Output Impedance (Nominal) 50 // 0pF iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04