Customer Informatio DRAWING No.: M80-4DIXXXXFC, M80-4DIXXXXFC-00-000-00-000 SHT 2 OF 2 ] IF IN DOUBT - ASK | sheet | NOT TO SCALE THIRD ANGLE PROJECTION | ALL DIMENSIONS IN mm SPECIFICATIONS: MATERIAL: MOULDING = GLASS-FILLED PPS, UL94V-0, BLACK DIM C CONTACT CLIP = BERYLLIUM COPPER CONTACT SHELL = BRASS IOILOK SCREW, COLLAR = STAINLESS STEEL SPRING = MUSIC WIRE FINISH: 05 = 0.3y GOLD CLIP, 0.25-0.3p GOLD SHELL 42 = 0.3p GOLD CLIP, 3.5-5.0p 100% TIN OVER NICKEL SHELL DIM B DIM A 05 8 42 = TIN COATED SPRINGS ELECTRICAL: Il \\ CURRENT RATING AT 85C = 2.2A MAX WORKING VOLTAGE = 120V AC/DC VOLTAGE PROOF = 360V AC/DC 55 2. CONTACT RESISTANCE = 25 m() MAX AX INSULATION RESISTANCE = 100 MC) MIN CURRENT RATING AT 25C = 3.0A MAX / = ey LZ Cd ~~ )) fe ey Z a CG\\G u Ne 4 < wy aes DURABILITY = INSERTION FORCE (0.5mm GAUGE) = 2.8N MAX MECHANICAL: 500 OPERATIONS ) a) Ay YD BSS BY Bey ++4- Y BSS BS Bey a eG XS Ne, jl |_ | \\ Ls WITHDRAWAL FORCE (@0.5mm GAUGE) = 0.2N MIN ENVIRONMENTAL : , ; TEMPERATURE RANGE = -55C TO +125C PACKING: LOOSE FOR COMPLETE SPECIFICATION, SEE COMPONENT SPECIFICATION COOSHX (LATEST ISSUE) |. CONNECTOR IS SUPPLIED WITH CONTACTS LOOSE. 2. FOR EXTRA CONTACTS, USE PART Nos. M80-O110001 FOR M80-4DIXX42F1-00-000-00-000 M80-0110005 FOR M80-4DIXX05F1-00-000-00-000 3. RECOMMENDED WIRE TYPE = BS 3G 210 TYPE A, PTFE INSULATED 22 AWG. MAX INSULATION DIAMETER = @I.10mm, STRIP WIRE BY 2.00mm. 4. RECOMMENDED HAND CRIMP TOOL = M22520/2-01 WITH POSITIONER 15747. CONTACT INSERTION & EXTRACTION TOOL = 280-280 INSTRUCTION SHEETS ARE AVAILABLE. SPRING LOAD WHEN SOLID = 2.64N. I Din SPRING RATE = |.32N/mm LENGTH WILL BE 1.9mm WHEN IOILOK JACKSCREWS ARE ENGAGED WITH RETAINERS IN MATING CONNECTOR. ALL PART LABELLING TO BE AS ORDER CODE, EITHER WITH TRAILING ZEROS OR LEFT BLANK AS PER ORDER CODE EXAMPLES | AND 2. wo Co CONTACT: (QTY = TOTAL No. M80-O1100XX (SEE NOTE 2) OF CONTACTS) 05 = GOLD CLIP, GOLD SHELL Ol = GOLD CLIP, DIMENSION CALCULATION DIM A TOTAL No. OF CONTACTS - 2 DIM B TOTAL No. OF CONTACTS + 5 DIM C TOTAL NUMBER CONTACTS + 10 EXAMPLE ORDER CODE |: CONNECTOR WITH 20 SIGNAL CONTACTS, GOLD CLIP AND 100% TIN OVER NICKEL SHELL M80 - 4012042FC-00-000-00-000 DIM A = 18.00mm, DIM B = 25.00mm, DIM C = 30. 00mm. EXAMPLE ORDER CODE 2: CONNECTOR WITH 20 SIGNAL CONTACTS, GOLD CLIP AND 100% TIN OVER NICKEL SHELL M80 - 4D12042FC DIM A = 18.00mm, DIM B = 25.00mm, DIM C = 30. 00mm. J il Nill 100% TIN OVER NICKEL SHELL 1.9 SEE NOTE SECTION X-X 8 | : x + | 7 | - I I I I | I || | | | | | | | | | | I I I I | I ro ryt || ee | || bo tI | Ho! Ff | I I T T T T | I Lt Lo 2.00 TYP i x PART SECTION 727-72 ORDER 04 42 CODE: M80-4DIXXXXFC-XX-XXX-XX-XXX TOTAL No. OF CONTACTS TO 50 (EVEN NUMBERS ONLY) FINISH CODE 05 - GOLD CLIP, GOLD SHELL 100% TIN OVER NICKEL SHELL NUMBER OF SPECIAL CONTACTS Xs CAN BE DISPLAYED AS TRAILING ZEROS OR LEFT BLANK SEE EXAMPLE ORDER CODES FOR EXPLANATION. - GOLD CLIP, RA | 2 27.01. 118 11106 NAMEBISS. DATE J C/NOTE APPROVED: R. ADDE CHECKED: M.G.PLESTED DRAWN: S.FLOWER CUSTOMER REF. : ASSEMBLY DRG: FIA WA/0IN HARWIN USA HARWIN Europe (UK) HARWIN Asia TEL: 603 893 5376 FTEL: 023 9231 4545 FAX: 603 893 5396 FFAX: 023 9231 4590 mis@harwin.com mis@harwin.co.uk TEL: #65 6 779 4909 FAX: +65 6 779 3868 mis@harwin.com. sg THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND NUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. = 1mm X.X = 0.25mm X.XX = +0.10mm X.XXX = 0.01mm ANGLES = +5 UNLESS STATED MATERIAL: TITLE: DATAMATE J-TEK FEMALE SEE ABOVE CRIMP ASSY (LARGE BORE) WITH IOITLOK JACKSCREWS FINISH: SEE ABOVE DRAWING NUMBER: M80 - 4DIXXXXFC, SHT S/AREA. mm? | M80- ADI XXXXFC-00-000-00-000 | or 2