© Semiconductor Components Industries, LLC, 2011
December, 2011 − Rev. 25
1Publication Order Number:
LM2931/D
LM2931, NCV2931 Series
100 mA, Adjustable Output,
LDO Voltage Regulator with
60 V Load Dump Protection
The LM2931 series consists of positive fixed and adjustable output
voltage regulators that are specifically designed to maintain proper
regulation with an extremely low input−to−output voltage differential.
These devices are capable of supplying output currents in excess of
100 mA and feature a low bias current of 0.4 mA at 10 mA output.
Designed primarily to survive in the harsh automotive environment,
these devices will protect all external load circuitry from input fault
conditions caused by reverse battery connection, two battery jump
starts, and excessive line transients during load dump. This series also
includes internal current limiting, thermal shutdown, and additionally,
is able to withstand temporary power−up with mirror−image insertion.
Due to the low dropout voltage and bias current specifications, the
LM2931 series is ideally suited for battery powered industrial and
consumer equipment where an extension of useful battery life is
desirable. The ‘C’ suffix adjustable output regulators feature an output
inhibit pin which is extremely useful in microprocessor−based systems.
Features
•Input−to−Output Voltage Differential of < 0.6 V @ 100 mA
•Output Current in Excess of 100 mA
•Low Bias Current
•60 V Load Dump Protection
•−50 V Reverse Transient Protection
•Internal Current Limiting with Thermal Shutdown
•Temporary Mirror−Image Protection
•Ideally Suited for Battery Powered Equipment
•Economical 5−Lead TO−220 Package with Two Optional Leadforms
•Available in Surface Mount SOP−8, D2PAK and DPAK Packages
•High Accuracy (±2.5%) Reference (LM2931AC) Available
•Pb−Free Packages are Available
•NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
Applications
•Battery Powered Consumer Products
•Hand−held Instruments
•Camcorders and Cameras
FIXED
(Top View)
N.C.
GND
Input
N.C.
GND
Output18
54
ADJUSTABLE
(Top View)
Output
Inhibit
GND
Input
Adjust
GND
Output18
54
SOIC−8
D SUFFIX
CASE 751 1
8
TO−92
Z SUFFIX
CASE 29
FIXED OUTPUT VOLTAGE
Pin 1. Output
2. Ground
3. Input
TO−220
T SUFFIX
CASE 221AB
Pin 1. Input
2. Ground
3. Output
DPAK
DT SUFFIX
CASE 369C
D2PAK
D2T SUFFIX
CASE 936
TO−220
TH SUFFIX
CASE 314A
ADJUSTABLE OUTPUT VOLTAGE
Pin 1. Adjust
2. Output
Inhibit
3. Ground
4. Input
5. Output
TO−220
TV SUFFIX
CASE 314B
TO−220
T SUFFIX
CASE 314D
D2PAK
D2T SUFFIX
CASE 936A
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
ORDERING INFORMATION
See general marking and heatsink information in the device
marking section on page 15 of this data sheet.
DEVICE MARKING INFORMATION
1
23
13
13
1
5
1
1
5
1
5
1
5
http://onsemi.com
1
3
SOT−223
ST SUFFIX
CASE 318H
1
23
1
LM2931, NCV2931 Series
http://onsemi.com
2
Representative Schematic Diagram
*Deleted on Adjustable Regulators
Input
Output
30 k *
Adjust
92.8 k *
Ground
350
500
6.0 k
6.0
30 k
Output
Inhibit
EPI
Bias
50 k
5.8 V
10 k
11.5 k
3.0 k
3.94 k
30 k 30 k
180 k 184 k
6.8 V
35 k
48 k
This device contains 26 active transistors.
LM2931, NCV2931 Series
http://onsemi.com
3
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage Continuous VI40 Vdc
Transient Input Voltage (t ≤ 100 ms) VI(t)60 Vpk
Transient Reverse Polarity Input Voltage −VI(t)−50−Vpk
1.0% Duty Cycle, t ≤ 100 ms
Electrostatic Discharge Sensitivity (ESD)
Human Body Model (HBM) Class 2, JESD22 A114−C
Machine Model (MM) Class A, JESD22 A115−A
Charged Device Model (CDM), JESD22 C101−C
−
−
−
2000
200
2000
V
V
V
Power Dissipation
Case 29 (TO−92 Type)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 178 °C/W
Thermal Resistance, Junction−to−Case RqJC 83 °C/W
Case 221A, 314A, 314B and 314D (TO−220 Type)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 65 °C/W
Thermal Resistance, Junction−to−Case RqJC 5.0 °C/W
Case 318H (SOT−223)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 242 °C/W
Thermal Resistance, Junction−to−Case RqJC 21 °C/W
Case 369A (DPAK) (Note 1)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 92 °C/W
Thermal Resistance, Junction−to−Case RqJC 6.0 °C/W
Case 751 (SOP−8) (Note 2)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 160 °C/W
Thermal Resistance, Junction−to−Case RqJC 25 °C/W
Case 936 and 936A (D2PAK) (Note 3)
TA = 25°C PDInternally Limited W
Thermal Resistance, Junction−to−Ambient RqJA 70 °C/W
Thermal Resistance, Junction−to−Case RqJC 5.0 °C/W
Operating Ambient Temperature Range TA−40 to +125 °C
Operating Die Junction Temperature TJ+150 °C
Storage Temperature Range Tstg −65 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. DPAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 25 for board mounted Thermal Resistance.
2. SOP−8 Junction−to−Ambient Thermal Resistance is for minimum recommended pad size. Refer to Figure 24 for Thermal Resistance
variation versus pad size.
3. D2PAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 26 for board mounted Thermal Resistance.
4. NCV rated devices are subjected to and meet the AECQ−100 quality standards.
LM2931, NCV2931 Series
http://onsemi.com
4
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 5])
Characteristic Symbol
LM2931−5.0/NCV2931−5.0 LM2931A−5.0/NCV2931A−5.0
Unit
Min Typ Max Min Typ Max
FIXED OUTPUT
Output Voltage VOV
Vin = 14 V, IO = 10 mA, TA = 25°C 4.75 5.0 5.25 4.81 5.0 5.19
Vin = 6.0 V to 26 V, IO ≤ 100 mA,
TA = −40° to +125°C
4.50 −5.50 4.75 −5.25
Line Regulation Regline mV
Vin = 9.0 V to 16 V −2.0 10 −2.0 10
Vin = 6.0 V to 26 V −4.0 30 −4.0 30
Load Regulation (IO = 5.0 mA to 100 mA) Regload −14 50 −14 50 mV
Output Impedance ZOmW
IO = 10 mA, DIO = 1.0 mA, f = 100 Hz to
10 kHz
−200 − − 200 −
Bias Current IBmA
Vin = 14 V, IO = 100 mA, TA = 25°C−5.8 30 −5.8 30
Vin = 6.0 V to 26 V, IO = 10 mA, TA = −40° to
+125°C
−0.4 1.0 −0.4 1.0
Output Noise Voltage (f = 10 Hz to 100 kHz) Vn−700 − − 700 −mVrms
Long Term Stability S−20 − − 20 −mV/kHR
Ripple Rejection (f = 120 Hz) RR 60 90 −60 90 −dB
Dropout Voltage VI−VOV
IO = 10 mA −0.015 0.2 −0.015 0.2
IO = 100 mA −0.16 0.6 −0.16 0.6
Over−Voltage Shutdown Threshold Vth(OV) 26 29.5 40 26 29.5 40 V
Output Voltage with Reverse Polarity Input
(Vin = −15 V)
−VO−0.3 0 − −0.3 0 −V
5. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
6. NCV devices are qualified for automotive use.
LM2931, NCV2931 Series
http://onsemi.com
5
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 7])
LM2931C/NCV2931C LM2931AC/NCV2931AC
Characteristic Symbol Min Typ Max Min Typ Max Unit
ADJUSTABLE OUTPUT
Reference Voltage (Note 8, Figure 18) Vref V
IO = 10 mA, TA = 25°C 1.14 1.20 1.26 1.17 1.20 1.23
IO ≤ 100 mA, TA = −40 to +125°C 1.08 −1.32 1.15 −1.25
Output Voltage Range VO range 3.0 to
24
2.7 to
29.5
−3.0 to
24
2.7 to
29.5
−V
Line Regulation (Vin = VO + 0.6 V to 26 V) Regline −0.2 1.5 −0.2 1.5 mV/V
Load Regulation (IO = 5.0 mA to 100 mA) Regload −0.3 1.0 −0.3 1.0 %/V
Output Impedance ZOmW/V
IO = 10 mA, DIO = 1.0 mA, f = 10 Hz to 10 kHz −40 − − 40 −
Bias Current IBmA
IO = 100 mA −6.0 − − 6.0 −
IO = 10 mA −0.4 1.0 −0.4 1.0
Output Inhibited (Vth(OI) = 2.5 V) −0.2 1.0 −0.2 1.0
Adjustment Pin Current IAdj −0.2 − − 0.2 −mA
Output Noise Voltage (f = 10 Hz to 100 kHz) Vn−140 − − 140 −mVrms/V
Long−Term Stability S−0.4 − − 0.4 −%/kHR
Ripple Rejection (f = 120 Hz) RR 0.10 0.003 −0.10 0.003 −%/V
Dropout Voltage VI−VOV
IO = 10 mA −0.015 0.2 −0.015 0.2
IO = 100 mA −0.16 0.6 −0.16 0.6
Over−Voltage Shutdown Threshold Vth(OV) 26 29.5 40 26 29.5 40 V
Output Voltage with Reverse Polarity Input
(Vin = −15 V)
−VO−0.3 0 − −0.3 0 −V
Output Inhibit Threshold Voltages Vth(OI) V
Output “On”: TA = 25°C−2.15 1.90 −2.15 1.90
TA = −40° to +125°C− − 1.20 − − 1.20
Output “Off”: TA = 25°C 2.50 2.26 −2.50 2.26 −
TA = −40° to +125°C 3.25 − − 3.25 − −
Output Inhibit Threshold Current (Vth(OI) = 2.5 V) Ith(OI) −30 50 −30 50 mA
7. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
8. The reference voltage on the adjustable device is measured from the output to the adjust pin across R1.
LM2931, NCV2931 Series
http://onsemi.com
6
IO = 100 mA
IO = 10 mA
, OUTPUT VOLTAGE (V)
O
V
-V
in O, DROPOUT VOLTAGE (mV)V
Vin, INPUT VOLTAGE (V)
-20 -10 0 10 20 30 40 50 60
0
1.0
2.0
3.0
4.0
5.0
6.0
Vout = 5.0 V
RL = 500 W
TA = 25°C
, OUTPUT CURRENT (mA)
O
Vin, INPUT VOLTAGE (V)
50
150
250
350
0 5.0 10 15 20 25 30
I
TJ = -40°CTJ = 25°C
TJ = 85°C
Vin (10 V/DIV)
VO(5.0 V/DIV)
0
0
t, TIME (50 ms/DIV)
, INPUT VOLTAGE, OUTPUT VOLTAGE , OUTPUT VOLTAGE (V)
O
Vin, INPUT VOLTAGE (V)
0
1.0
2.0
3.0
4.0
5.0
6.0
0 1.0 2.0 3.0 4.0 5.0 6.0
V
TJ, JUNCTION TEMPERATURE (°C)
0
100
200
300
0 25 50 75 100 125
IO = 50 mA
-V
in O
IO, OUTPUT CURRENT (mA)
0 20 40 60 80 100
0
40
80
120
160
200
Vin = 14 V
DVout = 100 mV
TJ = 25°C
, DROPOUT VOLTAGE (mV)V
Vout = 5.0 V
RL = 50 W
CO = 100 mF
t = 150 ms
TA = 25°C
VCC = 15 V
VFB1 = 5.05 V
Dashed lines below Vin = 5.0 V
are for Adjustable output devices only.
Figure 1. Dropout Voltage versus Output Current
Vin = 14 V
DVout = 100 mV
Vout = 5.0 V
TA = 25°C
RL = 50 WIO = 100 mA
Figure 1. Dropout Voltage versus Output Current Figure 2. Dropout Voltage versus
Junction Temperature
Figure 3. Peak Output Current versus Input Voltage Figure 4. Output Voltage versus Input Voltage
Figure 5. Output Voltage versus Input Voltage Figure 6. Load Dump Characteristics
LM2931, NCV2931 Series
http://onsemi.com
7
IB, BIAS CURRENT (mA)
IB, BIAS CURRENT (mA)
IB
Vin, INPUT VOLTAGE (V)
0
2.0
4.0
6.0
8.0
10
12
-20 -10 0 10 20 30 40 50 60
RL = 50 W
, BIAS CURRENT (mA)
TJ, JUNCTION TEMPERATURE (°C)
-55 -25 0 25 50 75 100 125
0
2.0
4.0
6.0
8.0
IO = 100 mA
RR, RIPPLE REJECTION RATIO (dB)
f, FREQUENCY (Hz)
55
65
75
85
95
10 100 1.0 k 1.0 M 10 M
CO(ESR) = 0.15 W
Tantulum
RR, RIPPLE REJECTION RATIO (dB)
85
95
0 20 40 60 80 100
IO, OUTPUT CURRENT (mA)
Ω
f, FREQUENCY (Hz)
, OUTPUT IMPEDANCE (  )
O
0
0.4
0.8
1.2
1.6
2.0
10 100 1.0 k 10 k 100 k 1.0 M 10 M
I
CO(ESR) = 0.3 W
Electrolytic
CO(ESR) = 0.15 W
Tantulum
0
2.0
4.0
6.0
8.0
0 20 40 60 80 100
IO, OUTPUT CURRENT (mA)
IO = 0 mA
IO = 50 mA
Vout = 5.0 V
TJ = 25°C
Vin = 14 V
Vout = 5.0 V
IO = 10 mA
DIO = 1.0 mA
CO = 100 mF
TJ = 25°C
Vin = 14 V
Vout = 5.0 V
65
75
Vin = 14 V
Vout = 5.0 V
f = 120 Hz
TJ = 25°C
Vin = 14 V
Vout = 5.0 V
DVin = 100 mV
RL = 500 W
CO = 100 mF
TJ = 25°CCO(ESR) = 0.3 W
Electrolytic
10 k 100 k
Figure 7. Bias Current versus Input Voltage Figure 8. Bias Current versus Output Current
Figure 9. Bias Current versus Junction Temperature Figure 10. Output Impedance versus Frequency
Figure 11. Ripple Rejection versus Frequency Figure 12. Ripple Rejection versus Output Current
RL = 100 W
RL = 500 W
Vin = 14 V
Vout = 5.0 V
TJ = 25°C
LM2931, NCV2931 Series
http://onsemi.com
8
, REFERENCE VOLTAGE (V)
ref
VO, OUTPUT VOLTAGE (V)
1.160
1.180
1.200
1.220
1.240
0 3.0 6.0 9.0 12 15 18 21 24
V
18.5
14
t, TIME (10 ms/DIV)
Vout = 5.0 V
RL = 500 W
CO = 100 mF
CO(ESR) = 0.3 W
TA = 25°C
100
0
t, TIME (10 ms/DIV)
VO, OUTPUT VOLTAGE (V)
Vth(on/off) , OUTPUT INHIBIT‐THRESHOLDS (V)
2.0
2.1
2.2
0 3.0 6.0 9.0 12 15 18 21 24
Output “On"
Output “Off"
2.4
2.5
2.6
2.3
LM2931C Adjustable
IO = 10 mA
Vin = Vout + 1.0 V
TA = 25°C
Vin = 14 V
Vout = 5.0 V
Cin = 1000 mF
CO = 100 mF
CO(ESR) = 0.3 W
TA = 25°C
LM2931C Adjustable
IO = 10 mA
Vin = Vout + 1.0 V
TA = 25°C
OUTPUT CURRENT,
I (mA)
out Δ
OUTPUT VOLTAGE DEVIATION,
O, (2.0 mV/DIV)V
INPUT VOLTAGE,
V , (V)
in Δ
OUTPUT VOLTAGE DEVIATION,
O, (2.0 mV/DIV)V
Figure 13. Line Regulation Figure 14. Load Regulation
Figure 15. Reference Voltage versus Output Voltage Figure 16. Output Inhibit−Thresholds
versus Output Voltage
APPLICATIONS INFORMATION
The LM2931 series regulators are designed with many
protection features making them essentially blow−out
proof. These features include internal current limiting,
thermal shutdown, overvoltage and reverse polarity input
protection, and the capability to withstand temporary
power−up with mirror−image insertion. Typical application
circuits for the fixed and adjustable output device are shown
in Figures 17 and 18.
The input bypass capacitor Cin is recommended if the
regulator is located an appreciable distance (≥ 4″) from the
supply input filter. This will reduce the circuit’s sensitivity
to the input line impedance at high frequencies.
This regulator series is not internally compensated and
thus requires an external output capacitor for stability. The
capacitance value required is dependent upon the load
current, output voltage for the adjustable regulator, and the
type of capacitor selected. The least stable condition is
encountered at maximum load current and minimum output
voltage. Figure 22 shows that for operation in the “Stable”
region, under the conditions specified, the magnitude of the
output capacitor impedance |ZO| must not exceed 0.4 W. This
limit must be observed over the entire operating temperature
range of the regulator circuit.
With economical electrolytic capacitors, cold temperature
operation can pose a serious stability problem. As the
electrolyte freezes, around −30°C, the capacitance will
decrease and the equivalent series resistance (ESR) will
increase drastically, causing the circuit to oscillate. Quality
electrolytic capacitors with extended temperature ranges of
−40° to +85°C and −55° to +105°C are readily available.
Solid tantalum capacitors may be a better choice if small size
is a requirement, however, the maximum ⏐ZO⏐ limit over
temperature must be observed.
Note that in the stable region, the output noise voltage is
linearly proportional to ⏐ZO⏐. In effect, CO dictates the high
frequency roll−off point of the circuit. Operation in the area
titled “Marginally Stable” will cause the output of the
regulator to exhibit random bursts of oscillation that decay
in an under−damped fashion. Continuous oscillation occurs
when operating in the area titled “Unstable”. It is suggested
that oven testing of the entire circuit be performed with
maximum load, minimum input voltage, and minimum
ambient temperature.
LM2931, NCV2931 Series
http://onsemi.com
9
Figure 17. Fixed Output Regulator Figure 18. Adjustable Output Regulator
Figure 19. (5.0 A) Low Differential
Voltage Regulator
Figure 20. Current Boost Regulator with
Short Circuit Projection
Figure 21. Constant Intensity Lamp Flasher
Vin
Input Output
Vout
CO
IBGND
Cin
0.1
LM2931-5.0
Fixed
Output
Switch Position 1 = Output “On", 2 = Output “Off"
LM2931C
Adjustable
Output
Vin
Cin
0.1
Vout
CO
OutputInput
51 k
1
2
Output
Inhibit Adjust
GND
IAdj
R1
R2
IB
The LM2931 series can be current boosted with a PNP transistor. The
D45VH7, on a heatsink, will provide an output current of 5.0 A with an input
to output voltage differential of approximately 1.0 V. Resistor R in
conjunction with the VBE of the PNP determines when the pass transistor
begins conducting. This circuit is not short circuit proof.
Input
≥ 6.0 V
D45VH7
5.0 V @ 5.0 A
Output
100 +
100
+
68
LM2931-5.0
LM2931C
Input
6.4 V to 30 V 2.0 k
8.2 k
100
+
CM
#345
100 +33 k 6.2 V
fosc = 2.2 Hz
0
22.5k wR1R2
R1)R
2
Vout+V
refǒ1 )R2
R1Ǔ)I
AdjR2
R
The circuit of Figure 19 can be modified to provide supply protection against
short circuits by adding the current sense resistor RSC and an additional PNP
transistor. The current sensing PNP must be capable of handling the short
circuit current of the LM2931. Safe operating area of both transistors must be
considered under worst case conditions.
Input
R
RSC
Output
LM2931-5.0
100 100
++
LM2931, NCV2931 Series
http://onsemi.com
10
0.20
0.30
0.00
ESR (Ohms)
Figure 22. Output Noise Voltage vs.
Output Capacitor Impedance
Figure 23. Output Capacitor ESR Stability vs.
Output Load Current
OUTPUT CURRENT (mA)
10 50 90 100
0.50
0.60
Note - Optimum stability uses a 22 mF
output capacitor. Output capacitor values
below 10 mF are not recommended.
Unstable
Stable
0.1
1.0
0.01
Vn, OUTPUT NOISE VOLTAGE (mVrms)
|ZO|, MAGNITUDE OF CAPACITOR IMPEDANCE (mW)
10 100 1.0 k 10 k
10
100
Vin = 5.6 V
Vout = 5.0 V
IO = 100 mA
Vnrms 10 Hz to 10 MHz
|ZO| @ 40 kHz
TA = 25°C
Unstable
Marginally
Stable
Stable
0
0.10
0.40
20 6030 7040 80
22 mF
10 mF
47 mF
100 mF
40
50
60
70
80
90
100
0
0.4
0.8
1.2
1.6
2.0
2.4
010203025155.0
L, LENGTH OF COPPER (mm)
PD(max) for TA = 50°C
Minimum
Size Pad
PD
L
L
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
, MAXIMUM POWER DISSIPATION (W)
Free Air
Mounted
Vertically
30
50
70
90
110
130
150
0.4
0.8
1.2
1.6
2.0
2.4
2.8
02030504010
L, LENGTH OF COPPER (mm)
170 3.2
RqJA
PD
R , THERMAL RESISTANCE
JAθ
JUNCTION-TO-AIR ( C/W)°
, MAXIMUM POWER DISSIPATION (W)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
2.0 oz.
Copper
Graph represents symmetrical layout
3.0 mmL
L
RqJA
2.0 oz. Copper
R , THERMAL RESISTANCE
JAθ
JUNCTION-TO-AIR ( C/W)°
Figure 24. SOP−8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
Figure 25. DPAK Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
PD(max) for TA = 50°C
LM2931, NCV2931 Series
http://onsemi.com
11
0
50
100
150
200
250
300
0.0
0.6
1.0
1.2
1.4
1.8
010203025155.0
L, LENGTH OF COPPER (mm)
PD(max) for TA = 50°C
RqJA, THERMAL RESISTANCE,
JUNCTION−TO−AIR (°CW)
PD, MAXIMUM POWER DISSIPATION (W)
RqJA
L
L
2.0 oz. Copper
ÎÎÎ
ÎÎÎ
ÎÎÎ
0.4
1.6
0.2
0.8
30
40
50
60
70
80
1.0
1.5
2.0
2.5
3.0
3.5
010203025155.0
L, LENGTH OF COPPER (mm)
PD(max) for TA = 50°C
Minimum
Size Pad
2.0 oz. Copper
L
L
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
Free Air
Mounted
Vertically
PD, MAXIMUM POWER DISSIPATION (W)
RqJA
R , THERMAL RESISTANCE
JAθ
JUNCTION-TO-AIR ( C/W)°
Figure 26. 3−Pin and 5−Pin D2PAK
Thermal Resistance and Maximum Power
Dissipation versus P.C.B. Copper Length
Figure 27. SOT−223 Thermal Resistance and Maximum
Power Dissipation vs. P.C.B. Copper Length
DEFINITIONS
Dropout Voltage − The input/output voltage differential
at which the regulator output no longer maintains regulation
against further reductions in input voltage. Measured when
the output decreases 100 mV from nominal value at 14 V
input, dropout voltage is affected by junction temperature
and load current.
Line Regulation − The change in output voltage for a
change in the input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that the average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Maximum Power Dissipation − The maximum total
device dissipation for which the regulator will operate
within specifications.
Bias Current − That part of the input current that is not
delivered to the load.
Output Noise Voltage − The rms AC voltage at the
output, with constant load and no input ripple, measured
over a specified frequency range.
Long−Term Stability − Output voltage stability under
accelerated life test conditions with the maximum rated
voltage listed in the devices electrical characteristics and
maximum power dissipation.
LM2931, NCV2931 Series
http://onsemi.com
12
ORDERING INFORMATION
Device
Output
Package Shipping†
Voltage Tolerance
LM2931AD−5.0 5.0 V "3.8% SOIC−898 Units / Rail
LM2931AD−5.0G 5.0 V "3.8% SOIC−8
(Pb−Free)
98 Units / Rail
LM2931AD−5.0R2 5.0 V "3.8% SOIC−82500 / Tape & Reel
LM2931AD−5.0R2G 5.0 V "3.8% SOIC−8
(Pb−Free)
2500 / Tape & Reel
LM2931ADT−5.0 5.0 V "3.8% DPAK 75 Units / Rail
LM2931ADT−5.0G 5.0 V "3.8% DPAK
(Pb−Free)
75 Units / Rail
LM2931ADT−5.0RK 5.0 V "3.8% DPAK 2500 / VacPk Reel
LM2931ADT−5.0RKG 5.0 V "3.8% DPAK
(Pb−Free)
2500 / VacPk Reel
LM2931AD2T−5.0 5.0 V "3.8% D2PAK 50 Units / Rail
LM2931AD2T−5.0G 5.0 V "3.8% D2PAK
(Pb−Free)
50 Units / Rail
LM2931AD2T−5.0R4 5.0 V "3.8% D2PAK 800 / VacPk Reel
LM2931AD2T−5R4G 5.0 V "3.8% D2PAK
(Pb−Free)
800 / VacPk Reel
LM2931AT−5.0 5.0 V "3.8% TO−220 50 Units / Rail
LM2931AT−5.0G 5.0 V "3.8% TO−220
(Pb−Free)
50 Units / Rail
LM2931AZ−5.0 5.0 V "3.8% TO−92 2000 / Inner Bag
LM2931AZ−5.0G 5.0 V "3.8% TO−92
(Pb−Free)
2000 / Inner Bag
LM2931AZ−5.0RA 5.0 V "3.8% TO−92 2000 / Tape & Reel
LM2931AZ−5.0RAG 5.0 V "3.8% TO−92
(Pb−Free)
2000 / Tape & Reel
LM2931AZ−5.0RP 5.0 V "3.8% TO−92 2000 / Ammo Pack
LM2931AZ−5.0RPG 5.0 V "3.8% TO−92
(Pb−Free)
2000 / Ammo Pack
LM2931D−5.0 5.0 V "5.0% SOIC−898 Units / Rail
LM2931D−5.0G 5.0 V "5.0% SOIC−8
(Pb−Free)
98 Units / Rail
LM2931D−5.0R2 5.0 V "5.0% SOIC−82500 / Tape & Reel
LM2931D−5.0R2G 5.0 V "5.0% SOIC−8
(Pb−Free)
2500 / Tape & Reel
LM2931D2T−5.0 5.0 V "5.0% D2PAK 50 Units / Rail
LM2931D2T−5.0G 5.0 V "5.0% D2PAK
(Pb−Free)
50 Units / Rail
LM2931D2T−5.0R4 5.0 V "5.0% D2PAK 800 / VacPk Reel
LM2931D2T−5.0R4G 5.0 V "5.0% D2PAK
(Pb−Free)
800 / VacPk Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
LM2931, NCV2931 Series
http://onsemi.com
13
ORDERING INFORMATION
Device Shipping†
Package
Output
Device Shipping†
Package
ToleranceVoltage
LM2931DT−5.0 5.0 V "5.0% DPAK 75 Units / Rail
LM2931DT−5.0G 5.0 V "5.0% DPAK
(Pb−Free)
75 Units / Rail
LM2931T−5.0 5.0 V "5.0% TO−220 50 Units / Rail
LM2931T−5.0G 5.0 V "5.0% TO−220
(Pb−Free)
50 Units / Rail
LM2931Z−5.0 5.0 V "5.0% TO−92 2000 / Inner Bag
LM2931Z−5.0G 5.0 V "5.0% TO−92
(Pb−Free)
2000 / Inner Bag
LM2931Z−5.0RA 5.0 V "5.0% TO−92 2000 / Tape & Reel
LM2931Z−5.0RAG 5.0 V "5.0% TO−92
(Pb−Free)
2000 / Tape & Reel
LM2931Z−5.0RP 5.0 V "5.0% TO−92 2000 / Ammo Pack
LM2931Z−5.0RPG 5.0 V "5.0% TO−92
(Pb−Free)
2000 / Ammo Pack
LM2931CD Adjustable "5.0% SOIC−898 Units / Rail
LM2931CDG Adjustable "5.0% SOIC−8
(Pb−Free)
98 Units / Rail
LM2931CDR2 Adjustable "5.0% SOIC−82500 / Tape & Reel
LM2931CDR2G Adjustable "5.0% SOIC−8
(Pb−Free)
2500 / Tape & Reel
LM2931CD2T Adjustable "5.0% D2PAK 50 Units / Rail
LM2931CD2TG Adjustable "5.0% D2PAK
(Pb−Free)
50 Units / Rail
LM2931CD2TR4 Adjustable "5.0% D2PAK 800 / VacPk Reel
LM2931CD2TR4G Adjustable "5.0% D2PAK
(Pb−Free)
800 / VacPk Reel
LM2931CT Adjustable "5.0% TO−220 50 Units / Rail
LM2931CTG Adjustable "5.0% TO−220
(Pb−Free)
50 Units / Rail
LM2931ACD Adjustable "2.0% SOIC−898 Units / Rail
LM2931ACDG Adjustable "2.0% SOIC−8
(Pb−Free)
98 Units / Rail
LM2931ACDR2 Adjustable "2.0% SOIC−82500 / Tape & Reel
LM2931ACDR2G Adjustable "2.0% SOIC−8
(Pb−Free)
2500 / Tape & Reel
LM2931ACD2TR4 Adjustable "2.0% D2PAK 800 / VacPk Reel
LM2931ACD2TR4G Adjustable "2.0% D2PAK
(Pb−Free)
800 / VacPk Reel
LM2931ACTV Adjustable "2.0% TO−220 50 Units / Rail
LM2931ACTVG Adjustable "2.0% TO−220
(Pb−Free)
50 Units / Rail
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
LM2931, NCV2931 Series
http://onsemi.com
14
ORDERING INFORMATION
Device Shipping†
Package
Output
Device Shipping†
Package
ToleranceVoltage
NCV2931ACDR2* Adjustable "2.5% SOIC−82500 / Tape & Reel
NCV2931ACDR2G* Adjustable "2.5% SOIC−8
(Pb−Free)
2500 / Tape & Reel
NCV2931AD−5.0R2* 5.0 V "3.8% SOIC−82500 / Tape & Reel
NCV2931AD−5.0R2G* 5.0 V "3.8% SOIC−8
(Pb−Free)
2500 / Tape & Reel
NCV2931AST−5.0T3* 5.0 V "3.8% SOT−223 4000 / Tape & Reel
NCV2931AST−5.0T3G* 5.0 V "3.8% SOT−223
(Pb−Free)
4000 / Tape & Reel
NCV2931AZ−5.0G* 5.0 V "3.8% TO−92
(Pb−Free)
2000 / Inner Bag
NCV2931AZ−5.0RAG* 5.0 V "3.8% TO−92
(Pb−Free)
2000 / Tape & Reel
NCV2931CDR2* Adjustable "5.0% SOIC−82500 / Tape & Reel
NCV2931CDR2G* Adjustable "5.0% SOIC−8
(Pb−Free)
2500 / Tape & Reel
NCV2931D−5.0R2* 5.0 V "5.0% SOIC−82500 / Tape & Reel
NCV2931D−5.0R2G* 5.0 V "5.0% SOIC−8
(Pb−Free)
2500 / Tape & Reel
NCV2931ADT−5.0RK* 5.0 V "3.8% DPAK 2500 / Tape & Reel
NCV2931ADT5.0RKG* 5.0 V "3.8% DPAK
(Pb−Free)
2500 / Tape & Reel
NCV2931DT−5.0RK* 5.0 V "5.0% DPAK 2500 / Tape & Reel
NCV2931DT−5.0RKG* 5.0 V "5.0% DPAK
(Pb−Free)
2500 / Tape & Reel
NCV2931ACD2TR4G* Adjustable "2.5% D2PAK
(Pb−Free) 800 / VacPk Reel
NCV2931D2T−5.0R4* 5.0 V "5.0% D2PAK 800 / VacPk Reel
NCV2931D2T5.0R4G* 5.0 V "5.0% D2PAK
(Pb−Free)
800 / VacPk Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
LM2931, NCV2931 Series
http://onsemi.com
15
SOIC−8
D SUFFIX
CASE 751
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G or G= Pb−Free Device
MARKING DIAGRAMS
AWLYWWG
LM
2931AT−5
TO−220
T SUFFIX
CASE 221A
2931T−5.0
LM
TO−220
T SUFFIX
CASE 221A
AWLYWWG
931A5G
ALYWW
DPAK
DT SUFFIX
CASE 369A
2931G
ALYWW
DPAK
DT SUFFIX
CASE 369A
LM
2931AD2T−5.0
AWLYWWG
D2PAK
D2T SUFFIX
CASE 936
LM
2931AD2T−5
AWLYWWG
D2PAK
D2T SUFFIX
CASE 936
LM
2931D2T−5
AWLYWWG
D2PAK
D2T SUFFIX
CASE 936
TO−220
T SUFFIX
CASE 314D
ALYWW
LM
2931ACTV
AWLYWWG
D2PAK
D2T SUFFIX
CASE 936A
LM
2931ACD2T
AWLYWWG
D2PAK
D2T SUFFIX
CASE 936A
LM
2931CT
AWLYWWG
2931A
Z−5.0
ALYWG
G
TO−92
Z SUFFIX
CASE 029
2931Z
−5.0
ALYWG
G
TO−92
Z SUFFIX
CASE 029
Heatsink surface connected to Pin 2.
Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2.
Heatsink surface (shown as terminal 6 in
case outline drawing) is connected to Pin 3.
Heatsink surface
connected to Pin 3.
*
*This marking diagram also applies to NCV2931.
* *
*
SOT−223
ST SUFFIX
CASE 318H
ALYW
2931AG
G
123
SOIC−8
D SUFFIX
CASE 751
SOIC−8
D SUFFIX
CASE 751
SOIC−8
D SUFFIX
CASE 751
*
2931A
ALYW
G
1
8
2931A
ALYW5
G
1
8
2931C
ALYW
G
1
8
2931
ALYW5
G
1
8
LM2931, NCV2931 Series
http://onsemi.com
16
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
B
K
G
H
SECTION X−X
C
V
D
N
N
XX
SEATING
PLANE DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.45 5.20
B0.170 0.210 4.32 5.33
C0.125 0.165 3.18 4.19
D0.016 0.021 0.407 0.533
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.015 0.020 0.39 0.50
K0.500 --- 12.70 ---
L0.250 --- 6.35 ---
N0.080 0.105 2.04 2.66
P--- 0.100 --- 2.54
R0.115 --- 2.93 ---
V0.135 --- 3.43 ---
1
123
12
BENT LEAD
TAPE & REEL
AMMO PACK
STRAIGHT LEAD
BULK PACK
3
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
RA
P
J
B
K
G
SECTION X−X
C
V
D
N
XX
SEATING
PLANE DIM MIN MAX
MILLIMETERS
A4.45 5.20
B4.32 5.33
C3.18 4.19
D0.40 0.54
G2.40 2.80
J0.39 0.50
K12.70 ---
N2.04 2.66
P1.50 4.00
R2.93 ---
V3.43 ---
1
T
STRAIGHT LEAD
BULK PACK
BENT LEAD
TAPE & REEL
AMMO PACK
LM2931, NCV2931 Series
http://onsemi.com
17
PACKAGE DIMENSIONS
TO−220, SINGLE GAUGE
CASE 221AB−01
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND
LEAD IRREGULARITIES ARE ALLOWED.
4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS
S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM)
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.035 0.64 0.88
F0.142 0.147 3.61 3.73
G0.095 0.105 2.42 2.66
H0.110 0.155 2.80 3.93
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.020 0.024 0.508 0.61
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
−T−
C
S
T
U
R
J
LM2931, NCV2931 Series
http://onsemi.com
18
PACKAGE DIMENSIONS
TO−220
TH SUFFIX
CASE 314A−03
ISSUE E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 0.043 (1.092) MAXIMUM.
DIM
A
MIN MAX MIN MAX
MILLIMETERS
0.572 0.613 14.529 15.570
INCHES
B0.390 0.415 9.906 10.541
C0.170 0.180 4.318 4.572
D0.025 0.038 0.635 0.965
E0.048 0.055 1.219 1.397
F0.570 0.585 14.478 14.859
G0.067 BSC 1.702 BSC
J0.015 0.025 0.381 0.635
K0.730 0.745 18.542 18.923
L0.320 0.365 8.128 9.271
Q0.140 0.153 3.556 3.886
S0.210 0.260 5.334 6.604
U0.468 0.505 11.888 12.827
−T−SEATING
PLANE
L
S
E
C
FK
J
OPTIONAL
CHAMFER
5X
D5X
M
P
M
0.014 (0.356) T
G
A
U
B
Q−P−
TO−220
TV SUFFIX
CASE 314B−05
ISSUE L
V
Q
KF
UA
B
G
−P−
M
0.10 (0.254) P M
T
5X J
M
0.24 (0.610) T
OPTIONAL
CHAMFER
SLW
E
C
H
N
−T−SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 0.043 (1.092) MAXIMUM.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.572 0.613 14.529 15.570
B0.390 0.415 9.906 10.541
C0.170 0.180 4.318 4.572
D0.025 0.038 0.635 0.965
E0.048 0.055 1.219 1.397
F0.850 0.935 21.590 23.749
G0.067 BSC 1.702 BSC
H0.166 BSC 4.216 BSC
J0.015 0.025 0.381 0.635
K0.900 1.100 22.860 27.940
L0.320 0.365 8.128 9.271
N0.320 BSC 8.128 BSC
Q0.140 0.153 3.556 3.886
S--- 0.620 --- 15.748
U0.468 0.505 11.888 12.827
V--- 0.735 --- 18.669
W0.090 0.110 2.286 2.794
5X D
LM2931, NCV2931 Series
http://onsemi.com
19
PACKAGE DIMENSIONS
TO−220 5−LEAD
CASE 314D−04
ISSUE H
−Q−
12345
U
K
D
G
A
B1
5 PL
J
H
L
E
C
M
Q
M
0.356 (0.014) T
SEATING
PLANE
−T−
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.572 0.613 14.529 15.570
B0.390 0.415 9.906 10.541
C0.170 0.180 4.318 4.572
D0.025 0.038 0.635 0.965
E0.048 0.055 1.219 1.397
G0.067 BSC 1.702 BSC
H0.087 0.112 2.210 2.845
J0.015 0.025 0.381 0.635
K0.977 1.045 24.810 26.543
L0.320 0.365 8.128 9.271
Q0.140 0.153 3.556 3.886
U0.105 0.117 2.667 2.972
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 10.92 (0.043) MAXIMUM.
B1 0.375 0.415 9.525 10.541
B
DETAIL A-A
B1
B
DETAIL A−A
SOT−223
ST SUFFIX
CASE 318H−01
ISSUE O
ÉÉÉ
ÉÉÉ
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSION E1 DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.23 PER
SIDE.
4. DIMENSIONS b AND b2 DO NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS
OF THE b AND b2 DIMENSIONS AT MAXIMUM
MATERIAL CONDITION.
5. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
6. DIMENSIONS D AND E1 ARE TO BE DETERMINED
AT DATUM PLANE H.
DIM MIN MAX
MILLIMETERS
A--- 1.80
A1 0.02 0.11
b0.60 0.88
b1 0.60 0.80
b2 2.90 3.10
b3 2.90 3.05
c0.24 0.35
c1 0.24 0.30
D6.30 6.70
E6.70 7.30
E1 3.30 3.70
e2.30
e1 4.60
L0.25 ---
T0 10
T
__
c1
E
H
M
0.2 C C
A
S
B
B
B
A
A
M
0.1 C S
AS
B
E1 B
D
4
3
2
1
e
e1
M
0.1 C S
AS
B
b2
b
A
0.08
A1
c
b1
(b)
(b2)
b3
SECTION B−BL
ÇÇÇ
ÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉ
ÇÇÇÇÇÇÇ
SECTION A−A
LM2931, NCV2931 Series
http://onsemi.com
20
PACKAGE DIMENSIONS
DPAK
DT SUFFIX
CASE 369C−01
ISSUE D
b
D
E
b3
L3
L4
b2
eM
0.005 (0.13) C
c2
A
c
C
Z
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
D0.235 0.245 5.97 6.22
E0.250 0.265 6.35 6.73
A0.086 0.094 2.18 2.38
b0.025 0.035 0.63 0.89
c2 0.018 0.024 0.46 0.61
b2 0.030 0.045 0.76 1.14
c0.018 0.024 0.46 0.61
e0.090 BSC 2.29 BSC
b3 0.180 0.215 4.57 5.46
L4 −−− 0.040 −−− 1.01
L0.055 0.070 1.40 1.78
L3 0.035 0.050 0.89 1.27
Z0.155 −−− 3.93 −−−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-
MENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
12 3
4
5.80
0.228
2.58
0.102
1.60
0.063
6.20
0.244
3.00
0.118
6.17
0.243
ǒmm
inchesǓ
SCALE 3:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
H0.370 0.410 9.40 10.41
A1 0.000 0.005 0.00 0.13
L1 0.108 REF 2.74 REF
L2 0.020 BSC 0.51 BSC
A1
H
DETAIL A
SEATING
PLANE
A
B
C
L1
L
H
L2 GAUGE
PLANE
DETAIL A
ROTATED 90 CW5
LM2931, NCV2931 Series
http://onsemi.com
21
PACKAGE DIMENSIONS
SOIC−8 NB
CASE 751−07
ISSUE AK
SEATING
PLANE
1
4
58
N
J
X 45 _
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
−X−
−Y−
G
M
Y
M
0.25 (0.010)
−Z−
Y
M
0.25 (0.010) ZSXS
M
____
1.52
0.060
7.0
0.275
0.6
0.024
1.270
0.050
4.0
0.155
ǒmm
inchesǓ
SCALE 6:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
LM2931, NCV2931 Series
http://onsemi.com
22
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936−03
ISSUE D
5 REF5 REF
V
U
TERMINAL 4
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCHES.
3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS
A AND K.
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 4.
5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH OR GATE PROTRUSIONS. MOLD FLASH
AND GATE PROTRUSIONS NOT TO EXCEED
0.025 (0.635) MAXIMUM.
6. SINGLE GAUGE DESIGN WILL BE SHIPPED
AFTER FPCN EXPIRATION IN OCTOBER 2011.
DIM
A
MIN MAX MIN MAX
MILLIMETERS
0.386 0.403 9.804 10.236
INCHES
B0.356 0.368 9.042 9.347
C0.170 0.180 4.318 4.572
D0.026 0.036 0.660 0.914
E0.045 0.055 1.143 1.397
F0.051 REF 1.295 REF
G0.100 BSC 2.540 BSC
H0.539 0.579 13.691 14.707
J0.125 MAX 3.175 MAX
K0.050 REF 1.270 REF
L0.000 0.010 0.000 0.254
M0.088 0.102 2.235 2.591
N0.018 0.026 0.457 0.660
P0.058 0.078 1.473 1.981
R
S0.116 REF 2.946 REF
U0.200 MIN 5.080 MIN
V0.250 MIN 6.350 MIN
__
A
12 3
K
F
B
J
S
H
D
M
0.010 (0.254) T
E
OPTIONAL
CHAMFER
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
8.380
5.080
DIMENSIONS: MILLIMETERS
PITCH
2X
16.155
1.016
2X
10.490
3.504
BOTTOM VIEW
OPTIONAL CONSTRUCTIONS
TOP VIEW
SIDE VIEW
DUAL GAUGE
BOTTOM VIEW
L
T
P
RDETAIL C
SEATING
PLANE
2X
G
NM
CONSTRUCTION
D
C
DETAIL C
E
OPTIONAL
CHAMFER
SIDE VIEW
SINGLE GAUGE
CONSTRUCTION
S
C
DETAIL C
TT
D
E0.018 0.026 0.457 0.660
S
LM2931, NCV2931 Series
http://onsemi.com
23
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936A−02
ISSUE C
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
5 REF
A
123
K
B
S
H
D
G
C
E
ML
P
N
R
V
U
TERMINAL 6
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS A
AND K.
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 6.
5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH OR GATE PROTRUSIONS. MOLD FLASH
AND GATE PROTRUSIONS NOT TO EXCEED 0.025
(0.635) MAXIMUM.
DIM
A
MIN MAX MIN MAX
MILLIMETERS
0.386 0.403 9.804 10.236
INCHES
B0.356 0.368 9.042 9.347
C0.170 0.180 4.318 4.572
D0.026 0.036 0.660 0.914
E0.045 0.055 1.143 1.397
G0.067 BSC 1.702 BSC
H0.539 0.579 13.691 14.707
K0.050 REF 1.270 REF
L0.000 0.010 0.000 0.254
M0.088 0.102 2.235 2.591
N0.018 0.026 0.457 0.660
P0.058 0.078 1.473 1.981
R5 REF
S0.116 REF 2.946 REF
U0.200 MIN 5.080 MIN
V0.250 MIN 6.350 MIN
__
45
M
0.010 (0.254) T
−T−
OPTIONAL
CHAMFER
8.38
0.33
1.016
0.04
16.02
0.63
10.66
0.42
3.05
0.12
1.702
0.067
SCALE 3:1 ǒmm
inchesǓ
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
LM2931/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative