8RBS
Inductance Range/
电感值范围
:0.1~15mH
6.2Max. 2.3
5.0
φ8.3Max.
φ0.7
(Unit: mm)（单位：毫米）
FEATURES 特点
Ideal as a choke or a trap coil for low profile equipment.
Entire winding core is encapsulated in heat shrunk plastic
housing to provide mechanical and environmental protection.
RoHS compliant.
是适用于薄型设备的扼流线圈或陷波线圈的理想选择。
整个卷线芯包进热压缩塑料套内，以进行机械和环境保
护。
符合RoHS指令。
STANDARD PART NUMBERS 标准零件号码
TYPE 8RBS / 8RBS
型
零件号码(1) 电感值(2) 公差 最小Q(2) 测试频率 最大直流电阻 最大额定直流电流(3) 最小自谐振频率(4)
Part
Number(1)
Inductance(2)
(mH)
Tolerance
(%)
Q(2)
Min.
Test
Frequency
(kHz)
DC
Resistance
() Max.
Rated DC
Current(3)
(mA) Max.
Self-resonant
Frequency(4)
(MHz) Min.
#262LY-101K 0.10 10 60 796 2.0 200 6.1
#262LY-121K 0.12 10 60 796 3.0 200 5.5
#262LY-151K 0.15 10 60 796 3.0 200 5.0
#262LY-181K 0.18 10 60 796 3.0 200 4.7
#262LY-221K 0.22 10 60 796 3.0 150 4.5
#262LY-271K 0.27 10 60 796 3.0 150 4.1
#262LY-331K 0.33 10 60 796 4.0 150 3.8
#262LY-391K 0.39 10 60 796 4.0 100 3.5
#262LY-471K 0.47 10 60 796 5.0 100 3.2
#262LY-561K 0.56 10 60 796 6.0 100 2.9
#262LY-681K 0.68 10 60 796 6.0 100 2.7
#262LY-821K 0.82 10 60 796 7.0 50 2.3
#262LY-102K 1.0 10 80 252 9.0 50 2.1
#262LY-122K 1.2 10 80 252 9.0 50 1.9
#262LY-152K 1.5 10 80 252 11.0 50 1.8
#262LY-182K 1.8 10 80 252 12.0 50 1.6
#262LY-222K 2.2 10 80 252 14.0 50 1.5
#262LY-272K 2.7 10 80 252 15.0 50 1.4
#262LY-332K 3.3 10 80 252 25.0 40 0.9
#262LY-392K 3.9 10 80 252 30.0 40 0.9
#262LY-472K 4.7 10 80 252 32.0 40 0.8
#262LY-562K 5.6 10 80 252 36.0 30 0.7
#262LY-682K 6.8 10 80 252 40.0 30 0.7
#262LY-822K 8.2 10 80 252 45.0 30 0.6
#262LY-103( ) 10.0 5, 10 60 79.6 55.0 20 0.6
#262LY-123( ) 12.0 5, 10 60 79.6 65.0 20 0.5
#262LY-153( ) 15.0 5, 10 60 79.6 80.0 20 0.5
(1) Add the tolerance code of Inductance to within the ( ) of the Part
Number as follows: J= 5%, K= 10%.
(2) Q and Inductance are measured with a Q meter YHP-4343B or
equivalent.
(3) Rated DC current is that at which the inductance value decreases
by 10% by the excitation with DC current, measured at 1kHz with
a universal bridge or equivalent.
(4) Self-resonant frequency is for reference only.
(1)加电感值代码到零件代码的 ( )内，如：J＝5％、K＝
10％。
(2)使用Q仪表YHP-4343B或功能相同的仪器测试Q值和电感值。
(3) 额定直流电流是使用万用表或功能相同的用具再通过直流电使电感
值减小10%的情况下在1kHz下进行测试。
(4) 自谐振频率仅供参考。
Radial Type Fixed Inductors
径向引线式固定电感器