4 | 3 2 { THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION -1s- REVISIONS ALL RIGHTS RESERVED. COPYRIGHT _ TE Connectivity Ltd. P|] LIR DESCRIPTION DATE DWN | APVD A |_ INITIAL DRAWN 19NOV2019} RV | MB Electrical Characteristics .150 Grid-space Relays .150 Grid-space SC reactive nn ns at 28 volts Type 3SBC (2PDT) Standard Hybrid Re ays . (50,000 operations) Ordering Instructions 135 W (Ferm AB) Single Diode, Dual Diode mW (Form NC hice Ora operon Example: The relay selected inthe 1PNC-1 PNO Type SSBC (2PDT) 00 mal aap "example isa FORM AB .150-grid product Facts 135 mW AC resistive 0.5 amps at 115 volts eay, current calibrare ene b m Low profile... only Product Facts AC 0.125 amps at 115 volts (case racket mounting with 0.13-Inch 0.32 inches high m= Low profile... only solder hook header, 210 ohms coil ; , Fee 50 uA at 50 mV resistance, and 50 mW sensitivity m Internal diode for coll 0.88 thenes ign owW-level oU HA at ou M ? : transient suppression and 50 milliwatt forms available Peak AC or DC By choosing the proper code for transistor driven models . vas Contact Resistance each of these relay characteristics, available m@ Qualified to MIL-R-39016/37 0.050 ohms max.: 0.150 ohms after life te catalog number is m Qualified to MIL-R-39016/13 Qualified to MIL-R-39016/38 test 35BC6131E2. The letter R following. pp designs available = RF designs available Life 100,000 operations at rated S@"Sitivity code indicates relay loads listed; 1,000,000 operations at received 5000 operation miss-test. Catalog No. low-level loads EX, 3SBC6131E2R. 3SBC 6 13 1 E 2 ; Note: Relays specified by catalog a # Operating Characteristics numbers (per above directions) are aoe Operate Time 4 ms max. general use items controlled by cat-. Release Time 4 ms max. alog specifications. Relays tobe Calibration Contact Bounce 1.5 ms controlled by customer drawings Mounting . or relays having requirements not reader Oe ra hoo. covered in this publication will 350 volts rms at 70,000 feet and above 2 assigned special catalog num- a Daeldall Insulation Resistance 4.000 bers upon request. Sensitivity megohm min. over temperature range THIS DRAWING IS A CONTROLLED DOCUMENT. |", TSNOV2019 =TE TE Connectivity Environmental Characteristics ce RE SE, Pe. foxovz0r2 [Na 3S8CSERIES Vibration 30G, to 3000 Hz tpi UE a - Shock 100 G at 11 ms OF a PLC a 1 een sree SIZE CAGE CODE | DRAWING NO RESTRICTED TO Temperature -65C to +125C MATERIAL FINISH WEIGH = A3| \G=3SBC-SERIES - - CUSTOMER DRAWING SAE NTS PT 4 or 3 [RY A 1470-19 (1/15)4 THIS DRAWING IS UNPUBLISHED. | RELEASED FOR PUBLICATION COPYRIGHT TE Connectivity Ltd. ALL RIGHTS RESERVED. Coil Table Type 3SBC (All Values DC)*2PDT, 135 mW Sensitivity: (Code 1) Voltage Calibrated, Code 5 Current Calibrated, Code 6 . Release Voltage Release Current Coil Max. Max. Max. Coil Resistance Suggested Operate Hange @ 25C Continuous Operate Range @ 25C (mA) Code @ 25C Source Volts Current @ Current Letter (ohms) Voltst @ 25C Max. Min. 125C (mA) @ 25C (mA) Max Min. A 44+ 10% 3.5-6.2 24 1.45 0.26 87.0 54.5 32.7 6.00 B 56 + 10% 4.0-7.0 27 1.6 0.3 77.0 48.3 28.6 5.30 D 140+ 10% 6.4-12.0 44 26 0.5 50.3 31.4 18.5 3.60 E 210+ 10% 8.0-16.0 5.4 3.2 0.6 40.0 25.7 15.4 2.80 L 650 + 10% 13.6-24.0 9.5 56 1.0 22.9 14.3 8.6 1.54 K 1350 + 10% 20.0-35.0 13.5 8.1 1.5 155 10.0 6.0 1.10 N 2245 + 10% 26.0-46.0 17.1 10.5 1.9 12.0 7.6 47 0.84 Coil-Data (All Values DC)* Type 3SBC Form AB 50 mW Sensitivity non mil spec: (Code 2) Voltage Calibrated, Code 5 Current Calibrated, Code 6 . Release Voltage Release Current Coil Max. Max. Max. Coil Resistance Suggested | Operate Range @ 25C Continuous Operate Range @ 25C (mA) Code @ 25C Source Volts Current @ Current Letter (ohms) Voltst @ 25C Max. Min. 125C (mA) @ 25C (mA) Max. Min. B 56 + 10% 2.6-7.0 1.8 1.1 0.16 46.5 29.1 18.2 3.30 Cc 85 = 10% 3.3-9.5 23 1.4 0.20 38.7 24.2 15.4 2.70 D 140 + 10% 4.3-12.0 29 1.8 0.27 30.4 19.0 11.9 2.10 E 210 + 10% 5.3-14.0 3.6 2.2 0.33 24.8 15.5 9.7 1.75 F 360 + 10% 6.7-19.0 4.5 2.8 0.41 18.9 11.8 7.2 1.30 G 510 + 10% 8.2-23.0 5.6 3.5 0.51 15.8 9.9 6.2 1.10 H 775+ 10% 10.0-26.0 6.8 4.2 0.62 12.8 8.0 5.0 0,90 K 1350 + 10% 13,2-35.0 9.0 5.6 0.82 9.8 6.1 3.8 0.68 N 2245 + 10% 16.8-46.0 11.4 7.4 1.00 74 46 29 0.52 Values listed are factory test and inspection data. User should allow for meter variations. tAt nominal resistance plus 10%. +Applicable over the operating temperature range in circulating air. Coil Table Single Diode (All Values DC)*(2DPT), 135 mW Sensitivity: (Code 5) REVISIONS P LTR DESCRIPTION DATE DWN APVD - SEE SHEET 1 Coil Table Type 3SBC (All Values DC)*2PDT, 135 mW Sensitivity: (Code 1) Voltage Calibrated, Code 5 Current Calibrated, Code 6 Release Voltage Release Current Coil Max. Max. Max. Coil Resistance Suggested {| Operate Range @ 25C Continuous Operate Range @ 25C (mA) Code @ 25C Source Volts Current @ Current Letter (ohms) Voltst @ 25C Max. Min. 125C (mA) @ 25C (mA) Max. Min. A 44+ 10% 3.5-6.2 2.4 1.45 0.26 87.0 54.5 32.7 6.00 B 56 + 10% 4.0-7.0 27 1.6 0.3 77.0 48.3 28.6 5.30 D 140 + 10% 6.4-12.0 4.4 2.6 05 50.3 31.4 18.5 3.60 E 210+ 10% 8.0-16.0 5.4 3.2 0.6 40.0 25.7 15.4 2.80 L 650 + 10% 13.6-24.0 9.5 5.6 1.0 229 14.3 8.6 1.54 K 1350 + 10% 20.0-35.0 13.5 841 1.5 16.5 10.0 6.0 1.10 N 2245 + 10% 26.0-46.0 17 10.5 19 12.0 76 4.7 0.84 Coil-Data (All Values DC)* Type 3SBC Form AB 50 mW Sensitivity non mil spec: (Code 2) Voltage Calibrated, Code 5 Current Calibrated, Code 6 . Release Voltage Release Current Coil Max. Max. Max. Coil Resistance Suggested | Operate Range @ 26 Continuous Operate Range @ 25C (mA) Code @ 25C Source Volts Current @ Current Letter (ohms) Voltst @ 25C Max. Min. 125C (mA) @ 25C (mA) Max Min. B 56 + 10% 2.6-7.0 1.8 1.4 0.16 46.5 29.1 18.2 3.30 Cc 85 + 10% 3.3-9.5 2.3 1.4 0.20 38.7 24.2 15.1 2.70 D 140+ 10% 4.3-12.0 29 1.8 0.27 30.4 19.0 11.9 2.10 E 210+ 10% 5.3-14.0 3.6 2.2 0.33 24.8 16.5 a7 1.75 F 360 + 10% 6.7-19.0 4.5 2.8 0.41 18.9 11.8 7.2 1.30 G 510+ 10% 8.2-23.0 5.6 3.5 0,51 15.8 9.9 6.2 1.10 H 775+ 10% 10.0-26.0 6.8 4.2 0.62 12.8 8.0 5.0 0.90 K 1350 + 10% 13.2-35.0 9.0 5.6 0.82 9.8 6.1 3.8 0.68 N 2245 + 10% 16.8-46.0 11.4 7 1.00 7.4 46 2.9 0.52 Values listed are factory test and inspection data. User should allow for meter variations. tApplicable over the operating temperature range in circulating air. tAt nominal resistance plus 10%. Voltage Calibrated, Code 5 Current Calibrated, Code 6 _ Coil Max. Release Voltage Release Current Coil Suggested Max. Contin- | Max. Operate Code oa Source Cena Range @ 25 uous Current Current @ | Range @ 250 (mA) A 44+10% 3.5- 6.2 2.4 1.45 0.26 87.0 54.5 32.7 6.00 B 56+ 10% 4.0- 7.0 27 1.6 0.3 77.0 48.3 28.6 5.30 D 140+ 10% 6.4-12.0 4.4 2.6 0.5 50.3 31.4 18.5 3.60 E 210+ 10% 8.0-16.0 5.4 3.2 0.6 40.0 25,7 15.4 2.80 L 650 + 10% 13.6-24.0 9.5 5.6 1.0 22.9 14.3 8.6 1.54 K 1350 + 10% 20.0-35.0 13.5 8.1 1.5 15.5 10.0 6.0 1.10 N 2245 + 10% 26.0-46.0 17.1 10.5 1.9 12.0 7.6 47 0.84 Coil Table Dual Diode (All Values DC)*(2DPT), 135 mW Sensitivity: (Code 6) A 44+10% 3.9- 7.0 3.4 2.0 0.37 98.2 77.3 45.5 8.4 B 56+ 10% 4.6- 8.0 3.7 2.2 0.41 89.8 66.1 39.3 7.4 D 140+ 10% 7.8-12.0 5.4 3.2 0.6 52.4 38.6 22.9 4.3 E 210+ 10% 9.3-16.0 6.4 3.8 0.7 41.4 30.5 18.1 3.3 L 650 + 10% 15.0-24.0 10.5 6.2 1.1 23.6 16.2 9.5 1.7 K 1350 + 10% 21.0-35.0 14.5 8.7 1.6 16.0 10.7 6.4 4 N 2245 + 10% 27.0-46.0 18.1 10.9 2.0 12.1 8.1 49 0.9 19NOV2019 THIS DRAWING IS A CONTROLLED DOCUMENT. |", a= vit CHK 19NOV2019 =, TE TE Connectivity RV DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: APVD 19NOV2019 | NAME INCHES MB 3SBC-SERIES 0 PLC PRODUCT SPEC 1 PLC +- _ 2 PLC t- _ 3 PLC +- APPLICATION SPEC 4 PLC +- SIZE CAGE CODE | DRAWING NO RESTRICTED TO ANGLES t- _ MATERIAL FINISH WEIGHT AS (G=3SBC-SERIES CUSTOMER DRAWING SCALE SHEET NTS 2 F 3 REV A 1470-19 (1/15)4 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION roeoo ) COPYRIGHT TE Connectivity Ltd. ALL RIGHTS RESERVED. Mounting Ferms All dimensions in inches (3SBC, 3$CC) TOLERANCES (Vibration note with each (Untess otherwise specified) form 1s acceleration from Hundredths +0020 55 to 3000 Hz} Thousandths +0005 1062 mox GOS fen 85 * O1O+| f oro alo Js 4 wot ner " a0 oz | t 096 dia j GALE O96 dia ptt 850+ O10] (2 holes] 320 610 von (2 holes) ayer 4 max 320 max EZD AC iy i { (iS 150+ 010 1 i 320 max i L =" a a | a i b 610 max ' tt 610 max --d4 094 +010 Hee | (G2 max BN No Mount End Bracket Site Bracket Mounting Code Vibration Mounting Code Vibration Mounting Code Vibration 00 30g 13 30g 25 30g Assumes relay neid securely by potting or other means Header and Connection Diagrams Heater Types e),< 020 dia 2 HEADER tT TYPE DIMENSION CODE ae 020 Solder hook 013 1 CODE 1 } { i tf 7 j CODE 1,5,4&6 CODE 2 Tedd Sa - 460 - w 450 - blue bead blu bead ~ $75 { | | 500 CODE 1 CODE 2 iS0f> ~| sol dr t B @ Sie are lt Hy sy * j ; | f z { 4 i ee Igy S y Fate | > 4) blue e blue ee ~ + $ TT { + + Terminal View CODE 5 CODE 6 SINGLE DIODE DUAL DIODE REVISIONS P LTR DESCRIPTION DATE DWN APVD _ SEE SHEET 1 Electrical Characteristics Contact Ratings DC resistive 2 amps at 28 volts (50,000 operations) 1 Amp @ 28 V (100,000 operations) DC inductive 0.5 amps at 28 volts, 200 mH AC resistive 0.5 amps at 115 volts AC 0.125 amps at 115 volts (case grounded) Low-level 50 A at 50 mV Peak AC or DC Contact Resistance 0.050 ohms max.; 0.150 ohms after life test Life 100,000 operations at rated loads listed; 1,000,000 operations at low-level loads .150 Grid-space Hybrid Relays Single Diode, Dual Diode Type 3SBC (2PDT) 135 mW Product Facts m Low profile... only 0.32 inches high w 50 milliwatt forms available m Qualified to MIL-R-39016/37 m Qualified to MIL-R-39016/38 m RF designs available Operating Characteristics Operate Time 4 ms max. Release Time 6 ms max. Contact Bounce 1.5 ms Dielectric Strength (Note 1) 500 volts rms at sea level: 350 volts rms at 70,000 feet and above Insulation Resistance (Note 1) 1,000 megohm min. over temperature range Environmental Characteristics Vibration 30G, to 3000 Hz Shock 100 G at 11 ms Temperature -65C to +125C Semiconductor Characteristics at 25C Diode Max. Negative Transient 1.0 volt Breakdown Voltage 100 VDC @ 10 pA Max. Leakage Current 1 uA @ 50 VDC THIS DRAWING IS A CONTROLLED DOCUMENT. RV DIMENSIONS: INCHES TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN 19NOV2019 CHK 18NOV2019 -, TE TE Connectivity RV APVD 19NOV2019 | NAME MB SSBCSERIES 0 PLC PRODUCT SPEC 1 PLC _ _ 2 PLC Ow 3 PLC APPLICATION SPEC _ ANGLES + _ SIZE | CAGE CODE | DRAWING NO RESTRICTED 70 ALL DIMENSIONS ARE IN INCHES MATERIAL FINISH WEIGHT = AZ _ @=-3S8C-SERIES : - CUSTOMER DRAWING SCALE NTS SHEET 33 REV A 1470-19 (1/15)