Digital Phosphor Oscilloscopes
TDS3000C Series Datasheet
The TDS3000C Series provides you with the performance you need at a
price you can afford. Bandwidths range from 100 MHz to 500 MHz, with up
to 5 GS/s sample rates for accurate representation of your signal.
Key performance specifications
100 MHz, 300 MHz, and 500 MHz bandwidth models
2 or 4 analog channel models
Sample rates up to 5 GS/s real time on all channels
10k record length on all channels
3,600 wfms/s continuous waveform capture rate
Suite of advanced triggers
Key features
Front-panel USB host port for easy storage and transfer of
measurement data
25 automatic measurements
FFT standard
Multiple language user interface
WaveAlert® automatic waveform anomaly detection
TekProbe® interface supports active, differential, and current probes for
automatic scaling and units
Portable design
Lightweight design (only 7 lb./3.2 kg) for easy transport
Optional internal battery operation provides up to three hours without
line power
Application modules for specialized analysis
Advanced analysis module
Limit testing module
Telecommunications mask testing module
Extended video module
601 serial digital video module
Applications
Digital design and debug
Video installation and service
Power supply design
Education and training
Telecommunications mask testing
Manufacturing test
General bench testing
DPOs provide greater level of insight into
complex signals
The TDS3000C Series offers fast waveform capture rates on a continuous
basis that save you time by quickly revealing the nature of faults, so
advanced triggers can be applied to isolate them.
Real-time intensity grading highlights the details about the history of a
signal's activity, making it easier to understand the characteristics of the
waveforms you've captured. Unlike other comparable oscilloscopes, the
history remains even after the acquisition has been stopped.
www.tektronix.com 1
Quickly debug and characterize signals with
DRT sampling technology and sin (x)/x
interpolation
The TDS3000C Series combines unique digital real-time (DRT) sampling
technology with sin(x)/x interpolation to allow you to accurately characterize
a wide range of signal types on all channels simultaneously. With the
TDS3000C Series there is no change in sampling rate when additional
channels are turned on, unlike other comparable oscilloscopes. This
sampling technology makes it possible to capture high-frequency
information, such as glitches and edge anomalies, that elude other
oscilloscopes in its class, while sin(x)/x interpolation ensures precise
reconstruction of each waveform.
Look for unintentional circuit noise with the TDS3000C series’ FFT capability.
Custom video triggering allows the TDS3000C Series to trigger on standards such as
RS-343 (26.2 kHz scan rate).
The TDS3000C Series provides breakthrough test speeds for telecommunications line
card testing. The telecom QUICKMENU puts all the commonly used telecom test
functions on a single menu.
Easy to setup and use
When working under tight deadlines, you need your oscilloscope to be
intuitive; you want to minimize time spent learning and relearning how to
use it. The TDS3000C Series oscilloscopes help reduce your learning
curve. Simple navigation and dedicated front-panel controls get you to
where you want to be quickly, so that you spend less time learning and
more time on the task at hand.
The TDS3000C series with the TDS3LIM module is ideal for manufacturing test
applications where fast Go/No-Go decisions are required.
Datasheet
2 www.tektronix.com
Trace and identify ITU-R BT.601 video signals with the TDS3SDI 601 Serial Digital Video
Module.
WaveAlert waveform anomaly detection alerts you to any waveform that deviates from
the “normal” input such as the glitch on channel 2.
Easily transfer, document, and analyze data on your PC.
Simple documentation and analysis
The TDS3000C Series comes equipped with a USB host port so you can
easily store and transfer measurement information to your PC.
OpenChoice® PC Communication Software allows you to simply pull screen
images and waveform data into a standalone desktop application or directly
into Microsoft Word and Excel.
To complement OpenChoice, National Instruments LabVIEW
SignalExpress™ Tektronix Edition Software provides you with extended
capabilities including advanced analysis, data logging, remote instrument
control, and live waveform analysis.
If you prefer not to use a PC for analysis, the TDS3000C Series comes
standard with 25 automatic measurements, waveform add, subtract, divide,
and multiply math functions, and Fast Fourier Transform (FFT). Unlike
other comparable oscilloscopes, the TDS3000C Series math and
measurement allows you to use the full acquisition record length or isolate
a specific occurrence within an acquisition.
Instrument control
Utilizing the built-in ethernet port, e*Scope web-based remote control
allows you to a control TDS3000C series oscilloscope from anywhere,
using the internet and your PC.
Work where you need to
The TDS3000C Series packs the power of a DPO in a compact design that
is only 5.9 in. (149 mm) deep, freeing up valuable benchtop space. And
when you need to move your oscilloscope to another lab, its portable 7 lb.
(3.2 kg) design makes for easy transport.
If your work demands even more mobility, then the optional battery pack
will give you up to three hours of operation without line power.
TDS3BATC provides you with up to three hours of portable battery operation.
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 3
Datasheet
4 www.tektronix.com
Specifications
All specifications apply to all models unless noted otherwise.
TDS3012C TDS3014C TDS3032C TDS3034C TDS3052C TDS3054C
Input channels 2 4 2 4 2 4
Bandwidth 100 MHz 100 MHz 300 MHz 300 MHz 500 MHz 500 MHz
Rise time (typical) 3.5 ns 3.5 ns 1.2 ns 1.2 ns 0.7 ns 0.7 ns
Sample rate on each channel 1.25 GS/s 1.25 GS/s 2.5 GS/s 2.5 GS/s 5 GS/s 5 GS/s
Record length 10 kpoints
Vertical system
Hardware bandwidth limits TDS3012C TDS3014C TDS3032C TDS3034C TDS3052C TDS3054C
20 MHz 20 MHz 20 MHz, 150 MHz 20 MHz, 150 MHz 20 MHz, 150 MHz 20 MHz, 150 MHz
Input coupling AC, DC, GND
Input impedance 1 MΩ in parallel with 13 pF or 50 Ω
Input sensitivity range
1 MΩ 1 mV/div to 10 V/div
50 Ω 1 mV/div to 1 V/div
Vertical resolution 9 bits
Maximum input voltage
1 MΩ 150 VRMS with peaks at ≤400 V
50 Ω 5 VRMS with peaks at ≤30 V
DC gain accuracy ±2%
Position range ±5 div
Horizontal system
Seconds/division range TDS3012C TDS3014C TDS3032C TDS3034C TDS3052C TDS3054C
4 ns to 10 s 4 ns to 10 s 2 ns to 10 s 2 ns to 10 s 1 ns to 10 s 1 ns to 10 s
Time base accuracy ±20 ppm over any 1 ms time interval
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 5
Trigger system
Trigger modes Auto (supports Roll Mode for 40 ms/div and slower), Normal, Single Sequence
B trigger Trigger after time or events
Trigger after time range 13.2 ns to 50 s
Trigger after events range 1 to 9,999,999 events
Trigger types
Edge Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: AC, DC, Noise Reject, HF
Reject, LF Reject
Video Trigger on all lines or individual lines, odd/even or all fields on NTSC, PAL, SECAM
Extended video Trigger on specific lines in broadcast and non-broadcast (custom) standards and on analog HDTV formats (1080i, 1080p, 720p,
480p). Requires TDS3VID or TDS3SDI application module
Pulse width (or glitch) Trigger on a pulse width <, >, =, ≠ to a selectable time limit ranging from 39.6 ns to 50 s
Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
Rise/fall time Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling, or either
Pattern Specifies AND, OR, NAND, NOR when true or false for a specific time
State Any logic state. Triggerable on rising or falling edge of a clock. Logic triggers can be used on combinations of 2 inputs (not 4)
Comm Provides isolated pulse triggering required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102 standard.
Requires TDS3TMT application module
Alternate Sequentially uses each active channel as a trigger source
Acquisition system
DPO Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. DPOs provide
3 dimensions of signal information in real time: Amplitude, time, and the distribution of amplitude over time
Sample Sample data only
Average Waveform averaged, selectable from 2 to 512
Envelope Min-max values acquired over one or more acquisitions
Peak detect High-frequency and random glitch capture. Captures glitches as narrow as 1 ns (typical) using acquisition hardware at all time
base settings
WaveAlert®Monitors the incoming signals on all channels and alerts the user to any waveform that deviates from the normal waveform being
acquired
Single sequence Use the Single Sequence button to capture a single triggered acquisition sequence at a time
Datasheet
6 www.tektronix.com
Waveform measurements
Cursors Amplitude, time
Automatic measurements Display any four measurements from any combination of waveforms. Or display all measurements with measurement snapshot
feature. Measurements include Period, Frequency, +Width, -Width, Rise time, Fall time, +Duty cycle, -Duty cycle, +Overshoot,
High, Low, Max, Min, Peak-to-peak, Amplitude, Mean, Cycle mean, RMS, Cycle RMS, Burst width, Delay, Phase, Area 1, Cycle
Area 1
Measurement statistics Mean, Min, Max, Standard deviation. Requires TDS3AAM application module
Thresholds User-definable thresholds for automatic measurements; settable in percent or voltage
Gating Isolate a specific occurrence within an acquisition to take measurements, using either the screen or cursors
Waveform math
Arithmetic Add, subtract, multiply, and divide waveforms
FFT Spectral magnitude. Set FFT vertical scale to Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning, or
Blackman-Harris
Advanced math Integrate, differentiate, define extensive algebraic expressions including analog waveforms, math functions, scalars, up to two
user-adjustable variables and results of parametric measurements. For example: (Intg (Ch1-Mean(Ch1)) × 1.414 × VAR1) 2
Waveform processing
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Deskew Channel-to-channel deskew ±10 ns may be manually entered for better timing measurements and more accurate math waveforms
Display system
Display type 6.5 in. (165.1 mm) liquid-crystal TFT color display
Display resolution 640 horizontal × 480 vertical pixels (VGA)
Interpolation Sin(x)/x
Waveform styles Dots, vectors, variable persistence, infinite persistence
Graticules Full, grid, crosshair, and frame. NTSC, PAL, SECAM, and vectorscope (100% and 75% color bars) with optional TDS3VID or
TDS3SDI application modules
Format YT, XY, and Gated XYZ (XY with Z-axis blanking available on 4-channel instruments only)
1Requires TDS3AAM application module.
2Requires TDS3AAM application module.
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 7
Input/output ports
Ethernet port RJ-45 connector, supports 10Base-T LAN
USB port Front-panel USB 2.0 host port. Supports USB flash drive
GPIB port Full talk/listen modes, setting and measurements.
(Optional with TDS3GV Communications Module)
RS-232C port DB-9 male connector, full talk/listen modes; control of all modes, settings and measurements
Baud rates up to 38,400
(Optional with TDS3GV Communications Module)
VGA video DB-15 female connector, monitor output for direct display on large VGA-equipped monitors
(Optional with TDS3GV communications module)
External trigger input BNC connector, input impedance >1 MΩ in parallel with 17 pF; max input voltage is 150 VRMS
Power source
AC line power
Source voltage 100 VRMS to 240 VRMS ±10%
Source frequency 45 Hz to 440 Hz from 100 V to 120 V
45 Hz to 66 Hz from 120 V to 240 V
Power consumption 75 W maximum
Battery power Requires TDS3BATC, rechargeable lithium ion battery pack
Operating time, typical 3 hours
Physical characteristics
Dimensions mm inches
Width 375.0 14.8
Height 176.0 6.9
Depth 149.0 5.9
Weight kg lb.
Instrument only 3.2 7.0
with accessories 4.5 9.8
Package dimensions mm inches
Width 502.0 19.8
Height 375.0 14.8
Depth 369.0 14.5
Rackmount (RM3000) mm inches
Width 484.0 19.0
Height 178.0 7.0
Depth 152.0 6.0
Datasheet
8 www.tektronix.com
EMC, environment and safety
Temperature
Operating 0 ºC to +50 ºC
Non-operating -40 ºC to +71 ºC
Humidity (Operating and non-operating)
At or below +30 ºC Up to 95% RH
+30 ºC up to +50 ºC Up to 45% RH
Altitude
Operating To 3,000 meters
Non-operating 15,000 meters
Electromagnetic compatibility Meets or exceeds EN61326 Class A, Annex D radiated and conducted emissions and immunity; EN6100-3-2 AC Powerline
Harmonic Emissions; EN6100-3-3 Voltage Changes, Fluctuation, and Flicker; FCC 47 CFR, Part 15, Subpart B, Class A;
Australian EMC framework
Safety UL61010B-1, CSA1010.1, IEC61010-1, EN61010-1
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 9
Ordering information
TDS3000C family
TDS3012C 100 MHz, 2 channels, 1.25 GS/s
TDS3014C 100 MHz, 4 channels, 1.25 GS/s
TDS3032C 300 MHz, 2 channels, 2.5 GS/s
TDS3034C 300 MHz, 4 channels, 2.5 GS/s
TDS3052C 500 MHz, 2 channels, 5 GS/s
TDS3054C 500 MHz, 4 channels, 5 GS/s
Please specify a language option and a power plug option from the lists that follow.
Standard accessories
Probes
P6139B 500 MHz 10x passive probe, one per channel
Accessories
Front protective cover
Accessory tray
Documentation CD Contains User Manuals in all languages
Front panel overlay Translated front panel overlay. Specify language option.
Installation and Safety Manual
Power cord Specify power plug option.
OpenChoice® PC connectivity
software
Enables fast and easy communication between Windows PC and the TDS3000C Series through LAN, GPIB, or RS-232. Transfer
and save settings, waveforms, measurements, and screen images
NI LabVIEW SignalExpress™
Tektronix Edition LE software
A fully interactive measurement software environment optimized for the TDS3000C Series. Enables you to acquire, generate,
analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not
require any programming. Standard TDS3000C Series support for acquiring, controlling, viewing, and exporting your live signal
data is permanently available through the software. A 30-day trial period of the full version provides additional signal processing,
advance analysis, mixed signal, sweeping, limit testing, and user-defined step capabilities. Order SIGEXPTE for permanent full
version capability
Traceable Certificate of Calibration NIM/NIST
Warranty
Three year warranty covering all labor and parts, excluding probes and accessories
Datasheet
10 www.tektronix.com
Instrument options
Power plug options
Opt. A0 North America power plug (115 V, 60 Hz)
Opt. A1 Universal Euro power plug (220 V, 50 Hz)
Opt. A2 United Kingdom power plug (240 V, 50 Hz)
Opt. A3 Australia power plug (240 V, 50 Hz)
Opt. A4 North America power plug (240 V, 50 Hz)
Opt. A5 Switzerland power plug (220 V, 50 Hz)
Opt. A6 Japan power plug (100 V, 110/120 V, 60 Hz)
Opt. A10 China power plug (50 Hz)
Opt. A11 India power plug (50 Hz)
Opt. A99 No power cord
Language options
Opt. L0 English manual
Opt. L1 French manual
Opt. L2 Italian manual
Opt. L3 German manual
Opt. L4 Spanish manual
Opt. L5 Japanese manual
Opt. L6 Portuguese manual
Opt. L7 Simplified Chinese manual
Opt. L8 Traditional Chinese manual
Opt. L9 Korean manual
Opt. L10 Russian manual
Opt. L99 No manual
Language options include translated front-panel overlay for the selected language(s).
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 11
Service options
Available at time of purchase
Opt. CA1 Provides a single calibration event or coverage for the designated calibration
interval, whichever comes first
Opt. D1 Calibration data report
Opt. R5 Repair service - 5 year
Opt. SILV400 Standard warranty extended to 5 years
Available after purchase
TDS30xxC-CA1 Provides a single calibration event or coverage for the designated calibration
interval, whichever comes first
TDS30xxC-R1PW Repair service coverage 1 year post-warranty
TDS30xxC-R2PW Repair service coverage 2 years post-warranty
TDS30xxC-R5DW Repair service coverage 5 years (includes product warranty period); 5-year period
starts at time of customer instrument purchase
Recommended accessories
Probes
ADA400A 100x, 10x, 1x, 0.1x high-gain differential amplifier
P5100 2.5 kV, 100x high-voltage passive probe
P5205 1.3 kV, 100 MHz high-voltage differential probe
P5210 5.6 kV, 50 MHz high-voltage differential probe
P6243 1 GHz, ≤1 pF input C 10x active probe
TCP202 50 MHz, 15 A AC/DC current probe
TCP303 15 MHz, 150 A current probe 3
TCP305 50 MHz, 50 A current probe 3
TCP312 100 MHz, 30 A current probe 3
TCPA300 100 MHz probe amplifier
TCPA400 50 MHz probe amplifier
TCPA404XL 2 MHz, 500 A current probe 4
3Requires TCPA300 probe amplifier.
4Requires TCPA400 probe amplifier.
Datasheet
12 www.tektronix.com
Accessories
TDS3GV GPIB, VGA, RS-232 interface
TDS3AAM Advanced Analysis Module. Adds extended math capability, arbitrary math expressions, measurement statistics, and additional
automated measurements
TDS3LIM Limit Testing Module. Adds custom waveform limit testing capabilities
TDS3TMT Telecom Mask Testing Module. Adds pass/fail compliance of ITU-T G.703 and ANSI T1.102 standards, custom mask testing, and
more
TDS3VID Extended Video Analysis Module. Adds video quickmenu, autoset, hold, line count trigger, video picture mode, vectorscope 5
mode, HDTV format trigger graticules, and more
TDS3SDI Serial/Digital Video Module. Adds 601 serial digital video to analog video conversion, video picture, vectorscope 5, and analog
HDTV triggering capabilities, and more
TDS3BATC Lithium-ion battery pack for up to 3 hours continuous operation without line power
TDS3ION Battery charger
AC3000 Soft case for carrying instrument
HCTEK4321 Hard plastic case for carrying instrument
(requires AC3000)
RM3000 Rackmount kit
SIGEXPTE NI LabVIEW SignalExpress™ Tektronix Edition Software full version
071-2507-xx Service manual (English only)
TNGTDS01 Extensive instructions and step-by-step lab exercises provide education about the operation of TDS3000C Series Oscilloscopes.
Kit includes self-paced CD-ROM based manual and signal source board. Optional hardcopy manual available for order separately
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
5Vectorscope does not support composite video.
TDS3000C Series Digital Phosphor Oscilloscopes
www.tektronix.com 13
Datasheet
ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401
Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835*
Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*
Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098
People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370
Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777
Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835*
Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 April 2013
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
27 Aug 2014 41W-12482-23
www.tektronix.com
