2018.3③1
2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
Features
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the header pin through type structure
and the diverse header variation.
The board to board size can be set at infinite stages.
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can be oriented in the same
direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated products are lined up. In addition, the
header to correspond to the board to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please contact HRS company as required.
Board to Board size Freely settable
Fig.1
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
qewrty
Product Specifi cations
Rating Current rating : 3A
Operating Temperature Range : -35ç to +85ç (Note 1)
Storage Temperature Range : -10ç to +60ç (Note 2)
Voltage rating : 250V AC
Operating Humidity Range : 40% to 80% Storage Humidity Range : 40% to 70% (Note 2)
Item Specifi cation Condition
1. Insulation Resistance 1000Mø min. 500V DC
2. Withstanding voltage No fl ashover or insulation breakdown. 650V AC/1 minute
3. Contact Resistance 30mø max. 100mA
4. Single Insertion/Extraction
Force MIN 0.4N (40gf), MAX 4.4N (450gf) Measured by the square steel pin with
0.635±0.002mm
5. Vibration No electrical discontinuity of 10µs or more Frequency : 10 to 55Hz, single amplitude of
0.75mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance : 30mø max. 96 hours at temperature of
7. Temperature Cycle Contact resistance : 30mø max.
Insulation resistance : 1000Mø min.
(-55ç : 30 minutes, 5 to 35ç : 10 minutes
85ç : 30 minutes, 5 to 35ç : 10 minutes)
5cycles
8. Durability
(Mating/un-mating) Contact resistance : 30mø max. Tin plating : 30 cycles
Gold plating : 50 cycles
9. Resistance to Soldering
heat
No deformation of components affecting
performance.
Flow : 260ç for 10 seconds
Manual soldering : 350ç for 3 seconds
Note 1 : Includes temperature rise caused by current fl ow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Material / Finish
Product Part Material Finish Remarks
Receptacle Insulator Polyamide Black UL94V-0
Contact Phosphor bronze Tin plated or gold plated –––––––
Pin Header Insulator PBT Main unit : Black/Locator : Gray UL94V-0
Contact Brass Tin plated or gold plated –––––––
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
MDF7 - * S - 2.54 DSA (**)
qSeries Name : MDF7
wNumber of contacts: 3 to 46
eConnector Type
S : Single row receptacle
D : Double row receptacle
P : Single row pin header
DP : Double row pin header
rContact Pitch : 2.54mm
tContact type
DSA : Straight through hole
DS : Right Angle through hole
yReceptacle
(95) : Tin plated (100 pcs/pack)
(96) : Gold plated (100 pcs/pack)
Pin Header
P (55) : Tin plated (100 pcs/pack)
(01) : Gold plated (100 pcs/pack)
DP (55) : Tin plated (100 pcs/pack)
Blank : Gold plated (100 pcs/pack)
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
Single Row Receptacle
[Specific No.] (* *), * *
(95) : Tin plated
(96) : Gold plated
Note 1 : A quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
Double Row Receptacle
[Specific No.] (* *), * *
(95) : Tin plated
(96) : Gold plated
P=2.54
±0.15
B
±0.3
A
±0.5
10
±0.3
5
±0.3
3
±0.3
0.76
±0.1
0.2
±0.1
2.54
±0.15
8.54
±0.4
Unit : mm
Part No. HRS No. No. of
Contacts AB
RoHS
Part No. HRS No. No. of
Contacts AB
RoHS
MDF7-3S-2.54DSA(**)
547-0355-0 **
3
7.62 5.08
Yes
MDF7-15S-2.54DSA(
**
)
547-0012-4 **
15
38.10 35.56
Yes
MDF7-5S-2.54DSA(**)
547-0112-9 **
5
12.70 10.16
MDF7-16S-2.54DSA(
**
)
547-0141-7 **
16
40.64 38.10
MDF7-6S-2.54DSA(**)
547-0129-1 **
6
15.24 12.70
MDF7-17S-2.54DSA(
**
)
547-0142-0 **
17
43.18 40.64
MDF7-7S-2.54DSA(**)
547-0135-4 **
7
17.78 15.24
MDF7-18S-2.54DSA(
**
)
547-0013-7 **
18
45.72 43.18
MDF7-8S-2.54DSA(**)
547-0136-7 **
8
20.32 17.78
MDF7-19S-2.54DSA(
**
)
547-0143-2 **
19
48.26 45.72
MDF7-9S-2.54DSA(**)
547-0137-0 **
9
22.86 20.32
MDF7-20S-2.54DSA(
**
)
547-0051-6 **
20
50.80 48.26
MDF7-10S-2.54DSA(**)
547-0038-8 **
10
25.40 22.86
MDF7-21S-2.54DSA(
**
)
547-0144-5 **
21
53.34 50.80
MDF7-11S-2.54DSA(**)
547-0138-2 **
11
27.94 25.40
MDF7-22S-2.54DSA(
**
)
547-0145-8 **
22
55.88 53.34
MDF7-12S-2.54DSA(**)
547-0040-0 **
12
30.48 27.94
MDF7-23S-2.54DSA(
**
)
547-0146-0 **
23
58.42 55.88
MDF7-13S-2.54DSA(**)
547-0139-5 **
13
33.02 30.48
MDF7-24S-2.54DSA(
**
)
547-0147-3 **
24
60.96 58.42
MDF7-14S-2.54DSA(**)
547-0140-4 **
14
35.56 33.02
MDF7-25S-2.54DSA(
**
)
547-0014-0 **
25
63.50 60.96
Note : The quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
Unit : mm
Part No. HRS No. No. of
Contacts AB
RoHS
MDF7-12D-2.54DSA(
**
)
547-0032-1 **
12
15.24 12.70
Yes
MDF7-14D-2.54DSA(
**
)
547-0354-8 **
14
17.78 15.24
MDF7-16D-2.54DSA(
**
)
547-0363-9 **
16
20.32 17.78
MDF7-20D-2.54DSA(
**
)
547-0033-4 **
20
25.40 22.86
MDF7-22D-2.54DSA(
**
)
547-0246-5 **
22
27.94 25.40
MDF7-24D-2.54DSA(
**
)
547-0244-0 **
24
30.48 27.94
MDF7-26D-2.54DSA(
**
)
547-0247-8 **
26
33.02 30.48
MDF7-30D-2.54DSA(
**
)
547-0016-5 **
30
38.10 35.56
MDF7-34D-2.54DSA(
**
)
547-0227-0 **
34
43.18 40.64
P=2.54
±0.15
1.5
±0.2
3
±0.2
7.5
±0.3
A
±0.5
B
±0.3
0.2
±0.1
0.76
±0.1
3
±0.3
5
±0.3
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
4
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
[Specific No.] (* *), * *
(55) : Tin plated
(01) : Gold plated
●Board Through-hole Diameter : Ø1.0
+
0
+
0.1
□0.64
±0.1
C
±0.3
3±0.3 2.54
±0.2
0.5
±0.2
2.54
±0.3
P=2.54±0.15
A
±0.5
B
±0.3
3±0.3 2.54
±0.2
C
±0.3
□0.64
±0.1
B
±0.3
A
±0.5
P=2.54±0.15
2.54
±0.3
0.5
±0.2
Single Row Straight Pin Header
Note 1 : PCB distance in the above table represents the case where the 1.6mm thickness board is used.
Note 2 : The quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
[with locator][without locator]
MDF7 (PCB distance : 2.54 to 5.5mm)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C
RoHS
MDF7-3P-2.54DSA(**)
547-0220-1 **
3
7.62 5.08
10
Yes
MDF7-5P-2.54DSA(**)
547-0113-1 **
5
12.70 10.16
MDF7-6P-2.54DSA(**)
547-0130-0 **
6
15.24 12.70
MDF7-7P-2.54DSA(**)
547-0148-6 **
7
17.78 15.24
MDF7-8P-2.54DSA(**)
547-0149-9 **
8
20.32 17.78
MDF7-9P-2.54DSA(**)
547-0150-8 **
9
22.86 20.32
MDF7-10P-2.54DSA(**)
547-0039-0 **
10
25.40 22.86
MDF7-11P-2.54DSA(**)
547-0151-0 **
11
27.94 25.40
MDF7-12P-2.54DSA(**)
547-0043-8 **
12
30.48 27.94
MDF7-13P-2.54DSA(**)
547-0152-3 **
13
33.02 30.48
MDF7-14P-2.54DSA(**)
547-0153-6 **
14
35.56 33.02
MDF7-15P-2.54DSA(**)
547-0018-0 **
15
38.10 35.56
MDF7-16P-2.54DSA(**)
547-0111-6 **
16
40.64 38.10
MDF7-17P-2.54DSA(**)
547-0154-9 **
17
43.18 40.64
MDF7-18P-2.54DSA(**)
547-0022-8 **
18
45.72 43.18
MDF7-19P-2.54DSA(**)
547-0155-1 **
19
48.26 45.72
MDF7-20P-2.54DSA(**)
547-0123-5 **
20
50.80 48.26
MDF7-21P-2.54DSA(**)
547-0156-4 **
21
53.34 50.80
MDF7-22P-2.54DSA(**)
547-0157-7 **
22
55.88 53.34
MDF7-23P-2.54DSA(**)
547-0158-0 **
23
58.42 55.88
MDF7-24P-2.54DSA(**)
547-0159-2 **
24
60.96 58.42
MDF7-25P-2.54DSA(**)
547-0023-0 **
25
63.50 60.96
MDF7B (PCB distance : 2.54 to 12mm)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C
RoHS
MDF7B-3P-2.54DSA(**)
547-0304-0 **
3
7.62 5.08
16.46
Yes
MDF7B-5P-2.54DSA(**)
547-0133-9 **
5
12.70 10.16
MDF7B-6P-2.54DSA(**)
547-0131-3 **
6
15.24 12.70
MDF7B-7P-2.54DSA(**)
547-0177-4 **
7
17.78 15.24
MDF7B-8P-2.54DSA(**)
547-0178-7 **
8
20.32 17.78
MDF7B-9P-2.54DSA(**)
547-0179-0 **
9
22.86 20.32
MDF7B-10P-2.54DSA(**)
547-0048-1 **
10
25.40 22.86
MDF7B-11P-2.54DSA(**)
547-0047-9 **
11
27.94 25.40
MDF7B-12P-2.54DSA(**)
547-0041-2 **
12
30.48 27.94
MDF7B-13P-2.54DSA(55)
547-0180-9 55
13
33.02 30.48
MDF7B-14P-2.54DSA(55)
547-0181-1 55
14
35.56 33.02
MDF7B-15P-2.54DSA(**)
547-0024-3 **
15
38.10 35.56
MDF7B-16P-2.54DSA(**)
547-0182-4 **
16
40.64 38.10
MDF7B-17P-2.54DSA(55)
547-0183-7 55
17
43.18 40.64
MDF7B-18P-2.54DSA(55)
547-0025-6 55
18
45.72 43.18
MDF7B-19P-2.54DSA(55)
547-0184-0 55
19
48.26 45.72
MDF7B-20P-2.54DSA(**)
547-0052-9 **
20
50.80 48.26
MDF7B-21P-2.54DSA(55)
547-0185-2 55
21
53.34 50.80
MDF7B-22P-2.54DSA(55)
547-0186-5 55
22
55.88 53.34
MDF7B-23P-2.54DSA(55)
547-0066-3 55
23
58.42 55.88
MDF7B-24P-2.54DSA(55)
547-0067-6 55
24
60.96 58.42
MDF7B-25P-2.54DSA(55)
547-0026-9 55
25
63.50 60.96
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
5
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
Note 1 : PCB distance in the above table represents the case where the 1.6mm thickness board is used.
Note 2 : A quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
Note 3 : As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-
production according to your demand. Please contact our account executive, as required.
MDF7P (PCB distance : 2.54 to 8mm)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C RoHS
MDF7P-3P-2.54DSA(01)
547-0462-0 01
3
7.62 5.08
12.5
Yes
MDF7P-5P-2.54DSA(**)
547-0511-4 **
5
12.70 10.16
MDF7P-6P-2.54DSA(**)
547-0513-0 **
6
15.24 12.70
MDF7P-7P-2.54DSA(**)
–––––––
7
17.78 15.24
MDF7P-8P-2.54DSA(55)
547-0514-2 55
8
20.32 17.78
MDF7P-9P-2.54DSA(**)
–––––––
9
22.86 20.32
MDF7P-10P-2.54DSA(55)
547-0360-0 55
10
25.40 22.86
MDF7P-11P-2.54DSA(**)
–––––––
11
27.94 25.40
MDF7P-12P-2.54DSA(55)
547-0345-7 55
12
30.48 27.94
MDF7P-13P-2.54DSA(**)
–––––––
13
33.02 30.48
MDF7P-14P-2.54DSA(55)
547-0385-1 55
14
35.56 33.02
MDF7P-15P-2.54DSA(55)
547-0230-5 55
15
38.10 35.56
MDF7P-16P-2.54DSA(55)
547-0346-0 55
16
40.64 38.10
MDF7P-17P-2.54DSA(**)
–––––––
17
43.18 40.46
MDF7P-18P-2.54DSA(**)
–––––––
18
45.72 43.18
MDF7P-19P-2.54DSA(55)
547-0347-2 55
19
48.26 45.72
MDF7P-20P-2.54DSA(**)
–––––––
20
50.80 48.26
MDF7P-21P-2.54DSA(**)
–––––––
21
53.34 50.80
MDF7P-22P-2.54DSA(**)
–––––––
22
55.88 53.34
MDF7P-23P-2.54DSA(**)
–––––––
23
58.42 55.88
MDF7P-24P-2.54DSA(**)
–––––––
24
60.96 58.42
MDF7P-25P-2.54DSA(55)
547-0348-5 55
25
63.50 60.96
MDF7C (PCB distance : 5.08 to 15mm, with Locator)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C RoHS
MDF7C-3P-2.54DSA(**)
547-0489-7 **
3
7.62 5.08
19.46
Yes
MDF7C-5P-2.54DSA(**)
547-0344-4 **
5
12.70 10.16
MDF7C-6P-2.54DSA(55)
547-0268-8 55
6
15.24 12.70
MDF7C-7P-2.54DSA(**)
547-0378-6 **
7
17.78 15.24
MDF7C-8P-2.54DSA(55)
547-0375-8 55
8
20.32 17.78
MDF7C-9P-2.54DSA(55)
547-0506-4 55
9
22.86 20.32
MDF7C-10P-2.54DSA(55)
547-0191-5 55
10
25.40 22.86
MDF7C-11P-2.54DSA(55)
547-0376-0 55
11
27.97 25.40
MDF7C-12P-2.54DSA(**)
547-0475-2 **
12
30.48 27.94
MDF7C-13P-2.54DSA(55)
547-0401-6 55
13
33.02 30.48
MDF7C-14P-2.54DSA(55)
547-0380-8 55
14
35.56 33.02
MDF7C-15P-2.54DSA(55)
547-0187-8 55
15
38.10 35.56
MDF7C-16P-2.54DSA(**)
–––––––
16
40.64 38.10
MDF7C-17P-2.54DSA(**)
–––––––
17
43.18 40.64
MDF7C-18P-2.54DSA(55)
547-0029-7 55
18
45.72 43.18
MDF7C-19P-2.54DSA(55)
547-0361-3 55
19
48.26 45.72
MDF7C-20P-2.54DSA(**)
547-0198-4 **
20
50.80 48.26
MDF7C-21P-2.54DSA(**)
–––––––
21
53.34 50.80
MDF7C-22P-2.54DSA(**)
–––––––
22
55.88 53.34
MDF7C-23P-2.54DSA(55)
547-0909-0 55
23
58.42 55.88
MDF7C-24P-2.54DSA(**)
–––––––
24
60.96 58.42
MDF7C-25P-2.54DSA(55)
547-0305-2 55
25
63.50 60.96
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
6
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
When the single-row straight pin header is used
When the PCB distance is set to MAX
When the header with locator is used
When the right angle pin header is used
Application Pattern and PCB mounting pattern
[Specific No.] (* *), * *
(55) : Tin plated
(56) : Gold plated
●Board Through-hole Diameter : Ø1.0
+
0
+
0.1
0.5
±0.2
0.5
±0.2
12.2
±0.5
4
±0.3
7.43
±0.5
□0.64
±0.1
(7.3)
3.3
±0.3
4
±0.2
P=2.54
±0.25
B
±0.5
A
±0.5
Single-Row Right Angle Pin Header
The locator moves as the connector is inserted.
To separate clearance between the boards, the operation limit t is defined as the
state where the male pin has passed through the receptacle.
Part No. HRS No.
No. of
Contacts
AB
RoHS
MDF7-5P-2.54DS(**)
547-0160-1 **
5
12.70 10.16
Yes
MDF7-6P-2.54DS(**)
547-0161-4 **
6
15.24 12.70
MDF7-7P-2.54DS(**)
547-0162-7 **
7
17.78 15.24
MDF7-8P-2.54DS(**)
547-0163-0 **
8
20.32 17.78
MDF7-9P-2.54DS(**)
547-0164-2 **
9
22.86 20.32
MDF7-10P-2.54DS(**)
547-0165-5 **
10
25.40 22.86
MDF7-11P-2.54DS(**)
547-0166-8 **
11
27.94 25.40
MDF7-12P-2.54DS(**)
547-0116-0 **
12
30.48 27.94
MDF7-13P-2.54DS(**)
547-0167-0 **
13
33.02 30.48
MDF7-14P-2.54DS(**)
547-0168-3 **
14
35.56 33.02
MDF7-15P-2.54DS(**)
547-0027-1 **
15
38.10 35.56
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
RoHS
MDF7-16P-2.54DS(**)
547-0169-6 **
16
40.64 38.10
Yes
MDF7-17P-2.54DS(**)
547-0170-5 **
17
43.18 40.64
MDF7-18P-2.54DS(**)
547-0019-3 **
18
45.72 43.18
MDF7-19P-2.54DS(**)
547-0171-8 **
19
48.26 45.72
MD7F-20P-2.54DS(**)
547-0172-0 **
20
50.80 48.26
MDF7-21P-2.54DS(**)
547-0173-3 **
21
53.34 50.80
MDF7-22P-2.54DS(**)
547-0174-6 **
22
55.88 53.34
MDF7-23P-2.54DS(**)
547-0175-9 **
23
58.42 55.88
MDF7-24P-2.54DS(**)
547-0176-1 **
24
60.96 58.42
MDF7-25P-2.54DS(**)
547-0028-4 **
25
63.50 60.96
Note : A quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
7
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
Double-Row Straight Pin Header
[Specific No.] (* *), * *
(55) : Tin plated
Blank : Gold plated
●Board Through-hole Diameter : Ø1.0
+
0
+
0.1
A
±0.5
B
±0.3
P=2.54±0.15
2.54
±0.15
C
±0.3
2.54
±0.2
3
±0.3
0.5
±0.2
□0.64
±0.1
5.08
±0.3
Note 1 : PCB distance in the above table represents the state where the 1.6mm thickness board is used.
Note 2 : A quantity for delivery is determined 100 pcs/pack. Please order the products per pack.
Note 3 : As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-
production according to your demand. Please contact our account executive, as required.
Application Pattern and PCB mounting pattern
When the double-row straight pin header is used
Precautions
MDF7 (PCB distance : 2.54 to 5.5mm)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C RoHS
MDF7-12DP-2.54DSA(**)
547-0034-7 **
12
15.24 12.70
10 Yes
MDF7-14DP-2.54DSA(**)
547-0365-4 **
14
17.78 15.24
MDF7-16DP-2.54DSA(**)
547-0364-1 **
16
20.32 17.78
MDF7-20DP-2.54DSA(**)
547-0114-4 **
20
25.40 22.86
MDF7-22DP-2.54DSA(**)
547-0093-6 **
22
27.94 25.40
MDF7-24DP-2.54DSA(**)
547-0250-2 **
24
30.48 27.94
MDF7-26DP-2.54DSA(**)
547-0251-5 **
26
33.02 30.48
MDF7-30DP-2.54DSA(**)
547-0037-5 **
30
38.10 35.56
MDF7-34DP-2.54DSA(**)
547-0252-8 **
34
43.18 40.64
MDF7P (PCB distance : 2.54 to 8mm)
Unit : mm
Part No. HRS No.
No. of
Contacts
AB
C RoHS
MDF7P-12DP-2.54DSA(**)
547-0407-2 **
12
15.24 12.70
12.5
Yes
MDF7P-14DP-2.54DSA(**)
–––––––
14
17.78 15.24
MDF7P-16DP-2.54DSA(55)
547-0367-0 55
16
20.32 17.78
MDF7P-20DP-2.54DSA(55)
547-0260-6 55
20
25.40 22.86
MDF7P-22DP-2.54DSA(55)
547-0261-9 55
22
27.94 25.40
MDF7P-24DP-2.54DSA(**)
547-0262-1 **
24
30.48 27.94
MDF7P-26DP-2.54DSA(**)
547-0263-4 **
26
33.02 30.48
MDF7P-30DP-2.54DSA(55)
547-0264-7 55
30
38.10 35.56
MDF7P-34DP-2.54DSA(**)
–––––––
34
43.18 40.64
1. Recommended Soldering Condition ■
Flow Condition by Automatic Soldering Unit
Soldering temperature : 255±5ç, Soldering time: within 10 seconds
■
Manual Soldering Condition
Soldering iron temperature : 340±10ç, Soldering time : within 3 seconds
2. Board Masking If the automatic soldering unit is used, block the pin header through-hole on
the receptacle mounted board with the masking tape, etc., and prevent the fl ux
pervasion.
In addition, if much fl ux is adhered so as to affect the contact, please be sure to clean
the board.
3. Cleaning Condition Refer to Wire-to-Board Connector Use Hand book.
4. Cautions ■
It is impossible to fi x the board to the board by the connector only. Please take
actions to fi x the board without using the connector.
■If the board deformation could occur due to vibration, please use the gold plating.
■Don't use the connector as the top entry.
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
8
MDF7 Series●2.54mm Pitch Bottom Entry Type Connector
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 03/2018. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
USA:
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
Phone : +1-978-662-5255
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
CHINA:
HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
KOREA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
FRANCE:
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
130 Avenue Joseph Kessel, Bat E, 78960
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
CHINA:
HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS)
18, Enterprise Center Tower 2, 209# Gong He
Road, Jing’an District, Shanghai, CHINA 200070
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7355
http://www.hirose.com/tw/
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/hk/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower,
Singapore 079909
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose.com/sg/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
MALAYSIA:
PENANG REPRESENTATIVE OFFICE
73-3-1, Ideal@The One, Jalan Mahsuri, Bayan
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
http://www.hirose.com/sg/
THAILAND:
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Powered by TCPDF (www.tcpdf.org)
