UCOM10G+LSBGA - AMPHENOL - Datasheet.Live

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

Harsh Environment 10Gb

Ethernet Micro Connectors

Markets & Applications

15mm

µCom-Series is a new range of connectors designed to address the latest trends of the industry :

miniaturization and high speed, with the highest resistance for use in the harshest environments.

Description

Main Features:

• 10Gb+: exceeds 10Gb/s Ethernet following IEEE 802.3an-2006 : 10GBase-T

• Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standard

• Environmental testing based on MIL-DTL-38999 series III military specications (Thread version)

• Environmental testing based on MIL-DTL-26482 military specications (Push Pull version)

• Miniature : 15 mm(.59˝) max external diameter

• Receptacle and in-line receptacle compatible with both thread and Push Pull plugs

• 4 pairs totally insulated throughout the connector

minimum cross-talk between the four pairs

• Patented special interfacial shapes

minimum perturbation at the interface of each pair

• Thread and Push Pull coupling mechanisms

2000 mating cycles & high vibration resistance

• Machined Brass shells

Plating available:

Olive Drab Cadmiumnot ROHS compliant

Black Nickel, and unplated brassROHS compliant

shell to shell continuity and 500h salt spray

resistance

• Machined & gold plated Solder and Crimp contacts

design & performance according to the

innercontact of M39029/77-429#16 M39029/76-

425#16 38999 contact

contacts are crimped with standard crimping tool

M22520/2-01 + Amphenol µCom positioner

• Solder contact : max AWG24

• Crimp contact : AWG 24 to 28

• IP68 sealing mated and unmated for PCB

receptacles

• 1500 Vrms Dielectric Withstanding Voltage

• Temperature range : - 55°C / + 125°C

Applications :

Shipboard

In Flight Entrertainment*

* µCom approved by GORE

C4ISR Ground Vehicle Navy Commercial Aerospace Railways

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

Transmission Data Female Receptacles

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

Amphenol performance

IEEE 802.3an Standard requirement

Exceeds

10Gb/s

Ethernet

requirement

√

UCOM - 10G+ R P B

Shell

R: receptacle (push pull or thread)

Contacts termination

P: PCB

S: solder

C: crimp

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

NOTA:

• UCOM for order designation

• μCom for marking on connectors

Female receptacle for printed circuit board

Compatible with both thread & push pull plugs

Panel mount female receptacle with metallic band backshell

Compatible with both thread & push pull plugs

Part number: UCOM-10G+ R P x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ R x x

x: see the 'How to order' below to complete your part number

Nota: metallic band and heatshrink sleeve are provided with the connector

How to Order Female Receptacles

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

Male Plugs Female in-line Receptacles

Plug with cable gland backshell

Plug with metallic band backshell

UCOM - 10G+ P T C B G A

Shell

P: plug

Mating (for plugs only)

T: thread

P: push-pull

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Backshell type

G: gland

B: band

Cable diameter (for gland backshell only)

A: for cable diam 7.5mm

NOTA:

• UCOM for order designation

• μCom for marking on connectors

[2.32]

[2.75]

Nota: Metallic band and heatshrink sleeve are provided with the connector

Thread version

Push Pull version

For other cable diameter, please consult us

Part number: UCOM-10G+ P T x x G x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ P P x x G x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ P T x x B

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ P P x x B

x: see the 'How to order' below to complete your part number

How to Order Male Plugs How to Order Female in-line Receptacles

Nota: Metallic band and heatshrink sleeve are provided with the connector

[2.32]

For other cable diameter, please consult us

UCOM - 10G+ L S B G A

Shell

L: in line receptacle (push pull or thread)

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Backshell type

G: gland

B: band

Cable diameter (for gland backshell only)

A: for cable diam 7.5mm

NOTA:

• UCOM for order designation

• μCom for marking on connectors

Female in-line receptacle with cable gland backshell

Compatible with both thread & push pull plugs

Female in-line receptacle with metallic band backshell

Compatible with both thread & push pull plugs

Part number: UCOM-10G+ L x x G x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ L x x B

x: see the 'How to order' below to complete your part number

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

www.amphenol-socapex.com

Due to technical progress, all information provided is subject to change without prior notice

µCom-10Gb +

Cordsets

µCom plug - µCom plug cordset

Type of cable used: CAT 7 HFFR - According to EN 50288-4-2

• Stranded bare copper wire (26 AWG)

• 4 screened twisted pairs: 2 wires twisted to a pair, Alulami-

nate foil overlapped

• Shield braiding of tinned copper wires, about 80% coverage

• Strain member of Kevlar

• Jacket in black Polyurethane (PUR), glossy nish,

acc to DIN VDE 0282

• External diameter 7.0 +/-0.3 mm

• UV & Hydrolysis resistant, Halogen free, RoHS compliant

• Max Pull force: 800 N, Weight : about 54 kg/km

• Temperature : - 40°C / + 85°C

• Min. bending radius allowed: repeated 8 x , single 4 x 

UCOM - 10G+ C T C B 0 1 5

Shell

C: µCom plug - µCom plug cordset

D: µCom plug - RJ45 Cat6A plug cordset

E: µCom panel mount receptacle - RJ45 Cat6A plug cordset

F: µCom plug - µCom inline receptacle cordset

Open versions:

G: µCom plug - no connector at the end

H: µCom panel mount receptacle - no connector at the end

J: µCom inline receptacle - no connector at the end

Mating (for plugs only)

T: thread

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Total length - For other lengths, please consult us.

002: 20 cm [7.87]

005: 50 cm [19.68]

010: 1.0 m [39.37]

015: 1.5 m [59.05]

020: 2.0 m [78.74]

050: 5.0 m [196.85]

100: 10.0 m [393.70]

NOTA:

• UCOM for order

designation

• μCom for marking

on connectors

µCom plug - RJ45 Cat6A plug cordset

µCom panel mount receptacle - RJ45 Cat6A plug

µCom plug - µCom inline receptacle

Part number:

UCOM-10G+ C x x x xxx

x: see the 'How to order' on

the next page to complete

your part number

Part number:

UCOM-10G+ D x x x xxx

x: see the 'How to order' on

the next page to complete

your part number

Part number:

UCOM-10G+ E x x xxx

x: see the 'How to order' on

the next page to complete

your part number

Part number:

UCOM-10G+ F x x x xxx

x: see the 'How to order'

below to complete your part

number

RJ45 Cat6A plug

Connector number

GORE ® has approved µCom assembled onto their cat6A cable P/N : RCN9034-24.

Information available on GORE® website.

How to Order Cordsets

Amphenol Socapex

948, promenade de l’Arve BP29

74311 Thyez Cedex - France

Phone: +33 (0)4 50 89 28 00

contact@amphenol-socapex.fr

We reserve the right to modify our products in any way we deem necessary.

Any duplication is prohibited, unless approved in writing.

www.amphenol-socapex.com

Follow Amphenol Socapex on social media : Designed by Amphenol Socapex

DOC-000015-ANG - August 2017

µCom-10Gb +

Accesories

Spares

Tools

Ø12

[0,48]

Ø4,1

[0,161]

CAPS for receptacles

IP68 metallic cap

x to be replaced by

B for Black electrophoresis

plating

G for Olive drab cadmium

plating

U for Unplated brass

IP68 neoprene cap - Part number: 31091

Nota: plan a type M3 hole on the panel

CAPS for plugs

Crimp Pin

Part number: 31073

Crimp Socket

Part number: 31074

Cap in neoprene

Part number: 31092

Dummy female receptacle

CAPS for in line receptacles

Cap in neoprene

Part number: 31093

• Nut clamping tool for receptacle

Part number: 31055

Only for RPx receptacles

Part number: 31131 x

x to be replaced by

B for Black nickel plating

G for Olive drab cadmium plating

U for Unplated brass

Other tools:

• Insertion tool for crimp contacts

Part number: 31056

• Contact positioner for

M22520/2-01 crimping tool

Part number: 31095

• Brazing tool for receptacle & in-line receptacle

Part number: 31132

• Brazing tool for plug

Part number: 31133

Nota: the cabling instructions are available upon demand (ref. N00-040190-00).

IP68 metallic cap with metallic tie on panel IP68 metallic cap with a 012 xation ring

31057 x31139 x

Nota: plan a hole on the panel