Fused MnO2 Tantalum Surface Mount Capacitors T496 Fused MnO2 Series Overview Applications The T496 Series of tantalum chip capacitors offers a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault currents exist. Protection from costly circuit damage due to reversed installation is offered with this device. Typical applications include decoupling and filtering in computing and telecommunications end applications, such as high-end servers requiring built-in fuse capability. Benefits * * * * * * * * * * * Meets or exceeds EIA Standard 535BAAC Approved to DSCC drawing 04053 Patented fuse assembly Optional gold-plated terminations Built-in fuse protects against short circuit mode 100% surge current test on C, D, and X sizes Halogen-free epoxy Capacitance values of 0.15 F to 330 F Tolerances of 10% and 20% Voltage rating of 4 - 50 VDC Fuse activation, 25C: within 1 second at fault currents of 4 amps and higher * Continuous current capability: 0.75 amps * Post actuation resistance, 25C: 10 M, minimum * Test tabs on side of case bypass the capacitor element to allow direct testing of the fuse assembly * RoHS Compliant and lead-free terminations * Operating temperature range of -55C to +125C Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 1 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Ordering Information T 496 X 227 M 010 A T Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Fail Safe B, C, D, X T= Tantalum First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V A = N/A T = 100% Matte Tin (Sn) Plated H = Standard Solder Coated (SnPb 5% Pb minimum) Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.15 - 477 F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 4 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 2 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ rated voltage, 2,000 hours 125C @ 2/3 rated voltage, 2,000 hours 125C @ 0 volts, 2,000 hours MIL-STD-202, Method 107, Condition B, mounted, -55C to 125C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage) MIL-STD-202, Method 213, Condition I, 100 G Peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification DSCC Drawing 04053 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 3 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 1000 T496B106M016ATE3K5 T496B106M016ATE3K5_IMP Capacitance (F) Impedance, ESR (Ohms) 100 T496D476M016ATE400_IMP T496X107M016ATE700_IMP T496B106M016ATE3K5_ESR T496D476M016ATE400_ESR T496X107M016ATE700_ESR 10 T496X107M016ATE700 10 1 1 0.1 T496D476M016ATE400 100 0 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size KEMET B C D X EIA Component L* 3.5 0.2 (0.138 0.008) 6.0 0.3 6032-28 (0.236 0.03) 7.3 0.3 7343-31 (0.287 0.012) 7.3 0.3 7343-43 (0.287 0.012) 3528-21 W* H* 2.8 0.2 (0.110 0.008) 3.2 0.3 (0.126 0.012) 4.3 0.3 (0.169 0.012) 4.3 0.3 (0.169 0.012) 1.9 0.2 (0.075 0.008) 2.5 0.3 (0.098 0.012) 2.8 0.3 (0.110 0.012) 4.0 0.3 (0.157 0.012) F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) X (Ref) 0.10 0.10 (0.004 0.004) 0.10 0.10 (0.004 0.004) 0.10 0.10 (0.004 0.004) 0.10 0.10 (0.004 0.004) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 1.8 (0.071) 2.2 (0.087) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.5 (.098) 2.8 (0.110) 2.4 (0.094) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-PRF-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 4 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference Rated Voltage Rated Case Code/ Cap Case Size KEMET Part Number DC Leakage A @ +20C Max/5 Min 2.7 2.7 4.0 6.0 6.0 8.8 8.8 13.2 13.2 13.2 18.8 VDC F KEMET/EIA 4 4 4 4 4 4 4 4 4 4 4 68 68 100 150 150 220 220 330 330 330 470 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 (See below for part options) T496C686(1)004A(2)E1K6 T496C686(1)004A(2)E400 T496C107(1)004A(2)E1K2 T496D157(1)004A(2)E800 T496C157(1)004A(2)E1K2 T496D227(1)004A(2)E700 T496D227(1)004A(2)E400 T496D337(1)004A(2)E700 T496D337(1)004A(2)E400 T496X337(1)004A(2)E700 T496X477(1)004A(2)E500 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 4.7 6.8 10 15 22 22 22 33 33 47 47 47 68 68 100 100 100 100 100 150 150 150 220 220 220 220 330 330 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 T496B475(1)006A(2)E3K5 T496B685(1)006A(2)E3K5 T496B106(1)006A(2)E3K5 T496C156(1)006A(2)E2K0 T496B226(1)006A(2)E3K5 T496B226(1)006A(2)E1K5 T496C226(1)006A(2)E2K0 T496C336(1)006A(2)E2K0 T496C336(1)006A(2)E600 T496C476(1)006A(2)E1K6 T496C476(1)006A(2)E600 T496D476(1)006A(2)E1K0 T496C686(1)006A(2)E1K2 T496D686(1)006A(2)E1K0 T496X107(1)006A(2)E900 T496X107(1)006A(2)E300 T496D107(1)006A(2)E800 T496D107(1)006A(2)E400 T496C107(1)006A(2)E400 T496X157(1)006A(2)E300 T496D157(1)006A(2)E700 T496D157(1)006A(2)E300 T496X227(1)006A(2)E700 T496X227(1)006A(2)E300 T496D227(1)006A(2)E700 T496D227(1)006A(2)E300 T496X337(1)006A(2)E500 T496X337(1)006A(2)E300 0.3 0.4 0.6 0.9 1.4 1.4 1.4 2.1 2.1 3.0 3.0 3.0 4.3 4.3 6.3 6.3 6.3 6.3 6.3 9.5 9.5 9.5 13.9 13.9 13.9 13.9 20.8 20.8 10 10 10 10 10 10 10 10 10 10 10 3.3 4.7 6.8 10 15 15 15 22 22 33 33 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 VDC F KEMET/EIA T496B335(1)010A(2)E3K5 T496B475(1)010A(2)E3K5 T496B685(1)010A(2)E3K5 T496C106(1)010A(2)E2K0 T496B156(1)010A(2)E3K5 T496C156(1)010A(2)E2K0 T496C156(1)010A(2)E600 T496C226(1)010A(2)E2K0 T496C226(1)010A(2)E500 T496D336(1)010A(2)E1K0 T496D336(1)010A(2)E400 (See below for part options) 0.3 0.5 0.7 1.0 1.5 1.5 1.5 2.2 2.2 3.3 3.3 A @ +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF % @ +20C m @ +20C 120 Hz % Max 100 kHz Max 6.0 1600 6.0 400 8.0 1200 8.0 800 8.0 1200 8.0 700 8.0 400 8.0 700 8.0 400 8.0 700 8.0 500 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 Moisture Sensitivity (mA) 100 kHz 25C 262 524 303 433 303 463 612 463 612 486 574 (mA) 100 kHz +85C 236 472 273 390 273 417 551 417 551 437 517 (mA) 100 kHz +125C 105 210 121 173 121 185 245 185 245 194 230 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 156 156 156 235 156 238 235 235 428 262 428 387 303 387 428 742 433 612 524 742 463 707 486 742 463 707 574 742 140 140 140 212 140 214 212 212 385 236 385 348 273 348 385 668 390 551 472 668 417 636 437 668 417 636 517 668 62 62 62 94 62 95 94 94 171 105 171 155 121 155 171 297 173 245 210 297 185 283 194 297 185 283 230 297 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 156 156 156 235 156 235 428 235 469 387 612 (mA) 100 kHz 25C 140 140 140 212 140 212 385 212 422 348 551 (mA) 100 kHz +85C 62 62 62 94 62 94 171 94 188 155 245 (mA) 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C 3500 3500 3500 2000 3500 1500 2000 2000 600 1600 600 1000 1200 1000 900 300 800 400 400 300 700 300 700 300 700 300 500 300 6.0 3500 6.0 3500 6.0 3500 6.0 2000 6.0 3500 6.0 2000 6.0 600 6.0 2000 6.0 500 6.0 1000 6.0 400 % @ +20C m @ +20C 120 Hz % Max 100 kHz Max DF Maximum Allowable Ripple Current ESR ESR Maximum Allowable Ripple Current Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 7/19/2013 5 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Case Code/ Cap Case Size KEMET Part Number DC Leakage A @ +20C Max/5 Min 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.0 22.0 22.0 VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 33 33 47 47 47 47 68 68 68 100 100 100 150 150 150 150 220 220 220 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 (See below for part options) T496C336(1)010A(2)E1K6 T496C336(1)010A(2)E400 T496D476(1)010A(2)E1K0 T496D476(1)010A(2)E400 T496C476(1)010A(2)E1K2 T496C476(1)010A(2)E400 T496X686(1)010A(2)E900 T496D686(1)010A(2)E800 T496D686(1)010A(2)E400 T496X107(1)010A(2)E400 T496D107(1)010A(2)E700 T496D107(1)010A(2)E400 T496X157(1)010A(2)E700 T496X157(1)010A(2)E400 T496D157(1)010A(2)E700 T496D157(1)010A(2)E400 T496X227(1)010A(2)E500 T496X227(1)010A(2)E300 T496D227(1)010A(2)E300 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 10 15 15 22 22 22 22 33 33 47 47 47 47 68 100 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 T496B225(1)016A(2)E3K5 T496B335(1)016A(2)E3K5 T496B335(1)016A(2)E2K1 T496B475(1)016A(2)E3K5 T496B475(1)016A(2)E1K6 T496C685(1)016A(2)E2K0 T496C685(1)016A(2)E600 T496B106(1)016A(2)E3K5 T496C106(1)016A(2)E2K0 T496C106(1)016A(2)E700 T496C156(1)016A(2)E2K0 T496C156(1)016A(2)E600 T496D226(1)016A(2)E1K0 T496D226(1)016A(2 E500 T496C226(1)016A(2)E1K6 T496C226(1)016A(2)E1K0 T496D336(1)016A(2)E1K0 T496D336(1)016A(2)E400 T496X476(1)016A(2)E900 T496X476(1)016A(2)E400 T496D476(1)016A(2)E800 T496D476(1)016A(2)E400 T496D686(1)016A(2)E400 T496X107(1)016A(2)E700 0.4 0.5 0.5 0.8 0.8 1.1 1.1 1.6 1.6 1.6 2.4 2.4 3.5 3.5 3.5 3.5 5.3 5.3 7.5 7.5 7.5 7.5 10.9 16.0 20 20 20 20 20 20 20 1.5 2.2 2.2 3.3 4.7 6.8 6.8 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 VDC F KEMET/EIA T496B155(1)020A(2)E5K0 T496B225(1)020A(2)E3K5 T496B225(1)020A(2)E1K6 T496B335(1)020A(2)E3K5 T496C475(1)020A(2)E2K0 T496C685(1)020A(2)E2K0 T496C685(1)020A(2)E600 (See below for part options) 0.3 0.4 0.4 0.7 0.9 1.4 1.4 A @ +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF % @ +20C m @ +20C 120 Hz % Max 100 kHz Max 6.0 1600 6.0 400 6.0 1000 6.0 400 6.0 1200 6.0 400 6.0 900 6.0 800 6.0 400 8.0 400 8.0 700 8.0 400 8.0 700 8.0 400 8.0 700 8.0 400 8.0 500 8.0 300 8.0 300 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 Moisture Sensitivity (mA) 100 kHz 25C 262 524 387 612 303 524 428 433 612 642 463 612 486 642 463 612 574 742 707 (mA) 100 kHz +85C 236 472 348 551 273 472 385 390 551 578 417 551 437 578 417 551 517 668 636 (mA) 100 kHz +125C 105 210 155 245 121 210 171 173 245 257 185 245 194 257 185 245 230 297 283 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 156 156 201 156 230 235 428 156 235 396 235 428 387 548 262 332 387 612 428 642 433 612 612 486 140 140 181 140 207 212 385 140 212 356 212 385 348 493 236 299 348 551 385 578 390 551 551 437 62 62 80 62 92 94 171 62 94 158 94 171 155 219 105 133 155 245 171 257 173 245 245 194 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 130 156 230 156 235 235 428 (mA) 100 kHz 25C 117 140 207 140 212 212 385 (mA) 100 kHz +85C 52 62 92 62 94 94 171 (mA) 100 kHz +125C 1 1 1 1 1 1 1 Reflow Temp 260C 3500 3500 2100 3500 1600 2000 600 3500 2000 700 2000 600 1000 500 1600 1000 1000 400 900 400 800 400 400 700 6.0 5000 6.0 3500 6.0 1600 6.0 3500 6.0 2000 6.0 2000 6.0 600 % @ +20C m @ +20C 120 Hz % Max 100 kHz Max DF Maximum Allowable Ripple Current ESR ESR Maximum Allowable Ripple Current Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 7/19/2013 6 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Case Code/ Cap Case Size KEMET Part Number DC Leakage A @ +20C Max/5 Min 2.0 2.0 3.0 3.0 3.0 4.4 4.4 6.6 6.6 6.6 9.4 9.4 VDC F KEMET/EIA 20 20 20 20 20 20 20 20 20 20 20 20 10 10 15 15 15 22 22 33 33 33 47 47 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 (See below for part options) T496C106(1)020A(2)E2K0 T496C106(1)020A(2)E800 T496D156(1)020A(2)E1K0 T496D156(1)020A(2)E500 T496C156(1)020A(2)E500 T496D226(1)020A(2)E1K0 T496D226(1)020A(2)E500 T496X336(1)020A(2)E900 T496X336(1)020A(2)E400 T496D336(1)020A(2)E400 T496X476(1)020A(2)E300 T496D476(1)020A(2)E300 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 0.68 1 1 1.5 1.5 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 22 22 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 T496B684(1)025A(2)E6K5 T496B105(1)025A(2)E5K0 T496B105(1)025A(2)E3K5 T496B155(1)025A(2)E5K0 T496B155(1)025A(2)E1K6 T496C225(1)025A(2)E3K5 T496C335(1)025A(2)E2K5 T496C335(1)025A(2)E2K1 T496B475(1)025A(2)E4K0 T496C475(1)025A(2)E2K5 T496C475(1)025A(2)E1K3 T496C685(1)025A(2)E2K0 T496C685(1)025A(2)E600 T496C106(1)025A(2)E600 T496D106(1)025A(2)E1K2 T496D106(1)025A(2)E600 T496C156(1)025A(2)E750 T496D156(1)025A(2)E1K0 T496D156(1)025A(2)E500 T496X226(1)025A(2)E900 T496X226(1)025A(2)E400 T496D226(1)025A(2)E800 T496D226(1)025A(2)E400 0.2 0.3 0.3 0.4 0.4 0.6 0.8 0.8 1.2 1.2 1.2 1.7 1.7 2.5 2.5 2.5 3.8 3.8 3.8 5.5 5.5 5.5 5.5 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 0.47 0.47 0.68 1 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA T496B474(1)035A(2)E8K0 T496B474(1)035A(2)E2K6 T496B684(1)035A(2)E6K5 T496B105(1)035A(2)E5K0 T496B105(1)035A(2)E3K1 T496C155(1)035A(2)E4K5 T496C155(1)035A(2)E2K6 T496C225(1)035A(2)E3K5 T496C225(1)035A(2)E1K6 T496C335(1)035A(2)E2K5 T496C335(1)035A(2)E900 T496D475(1)035A(2)E1K5 T496D475(1)035A(2)E700 T496D685(1)035A(2)E1K3 T496D685(1)035A(2)E750 (See below for part options) 0.2 0.2 0.2 0.4 0.4 0.5 0.5 0.8 0.8 1.2 1.2 1.6 1.6 2.4 2.4 A @ +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF % @ +20C m @ +20C 120 Hz % Max 100 kHz Max 6.0 2000 6.0 800 6.0 1000 6.0 500 6.0 500 6.0 1000 6.0 500 6.0 900 6.0 400 6.0 400 6.0 300 6.0 300 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 Moisture Sensitivity (mA) 100 kHz 25C 235 371 387 548 469 387 548 428 642 612 742 707 (mA) 100 kHz +85C 212 334 348 493 422 348 493 385 578 551 668 636 (mA) 100 kHz +125C 94 148 155 219 188 155 219 171 257 245 297 283 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 114 130 156 130 230 177 210 229 146 210 291 235 428 428 354 500 383 387 548 428 642 433 612 103 117 140 117 207 159 189 206 131 189 262 212 385 385 319 450 345 348 493 385 578 390 551 46 52 62 52 92 71 84 92 58 84 116 94 171 171 142 200 153 155 219 171 257 173 245 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 103 181 114 130 166 156 206 177 262 210 350 316 463 340 447 (mA) 100 kHz 25C 93 163 103 117 149 140 185 159 236 189 315 284 417 306 402 (mA) 100 kHz +85C 41 72 46 52 66 62 82 71 105 84 140 126 185 136 179 (mA) 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C 6500 5000 3500 5000 1600 3500 2500 2100 4000 2500 1300 2000 600 600 1200 600 750 1000 500 900 400 800 400 4.0 8000 4.0 2600 4.0 6500 4.0 5000 4.0 3100 6.0 4500 6.0 2600 6.0 3500 6.0 1600 6.0 2500 6.0 900 6.0 1500 6.0 700 6.0 1300 6.0 750 % @ +20C m @ +20C 120 Hz % Max 100 kHz Max DF Maximum Allowable Ripple Current ESR ESR Maximum Allowable Ripple Current Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 7/19/2013 7 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Case Code/ Cap Case Size VDC F KEMET/EIA 35 35 35 35 35 35 35 10 10 10 15 15 15 22 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.15 0.22 0.22 0.33 0.33 0.47 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage (See below for part options) T496X106(1)035A(2)E1K0 T496X106(1)035A(2)E500 T496D106(1)035A(2)E400 T496X156(1)035A(2)E900 T496X156(1)035A(2)E500 T496D156(1)035A(2)E500 T496X226(1)035A(2)E300 A @ +20C Max/5 Min 3.5 3.5 3.5 5.3 5.3 5.3 7.7 % @ +20C m @ +20C 120 Hz % Max 100 kHz Max 6.0 1000 6.0 500 6.0 400 6.0 900 6.0 500 6.0 500 6.0 300 (mA) 100 kHz 25C 406 574 612 428 574 548 742 (mA) 100 kHz +85C 365 517 551 385 517 493 668 (mA) 100 kHz +125C 162 230 245 171 230 219 297 Reflow Temp 260C 1 1 1 1 1 1 1 T496B154(1)050A(2)E16K T496B224(1)050A(2)E14K T496B224(1)050A(2)E10K T496B334(1)050A(2)E10K T496B334(1)050A(2)E2K6 T496C474(1)050A(2)E8K0 T496C474(1)050A(2)E1K9 T496C684(1)050A(2)E7K0 T496C684(1)050A(2)E1K7 T496C105(1)050A(2)E5K5 T496C105(1)050A(2)E2K7 T496C155(1)050A(2)E5K0 T496C155(1)050A(2)E2K0 T496D225(1)050A(2)E2K5 T496D225(1)050A(2)E900 T496D335(1)050A(2)E2K0 T496D335(1)050A(2)E1K0 T496X475(1)050A(2)E1K5 T496X475(1)050A(2)E400 T496D475(1)050A(2)E400 (See below for part options) 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.3 0.3 0.5 0.5 0.8 0.8 1.1 1.1 1.7 1.7 2.4 2.4 2.4 A @ +20C Max/5 Min 4.0 16000 4.0 14000 4.0 10000 4.0 10000 4.0 2600 4.0 8000 4.0 1900 4.0 7000 4.0 1700 4.0 5500 4.0 2700 6.0 5000 6.0 2000 6.0 2500 6.0 900 6.0 2000 6.0 1000 6.0 1500 6.0 400 6.0 400 % @ +20C m @ +20C 120 Hz % Max 100 kHz Max 73 78 92 92 181 117 241 125 254 141 202 148 235 245 408 274 387 332 642 612 (mA) 100 kHz 25C 66 70 83 83 163 105 217 113 229 127 182 133 212 221 367 247 348 299 578 551 (mA) 100 kHz +85C 29 31 37 37 72 47 96 50 102 56 81 59 94 98 163 110 155 133 257 245 (mA) 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF DF Maximum Allowable Ripple Current ESR ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 7/19/2013 8 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Recommended Voltage Derating Guidelines 85C to 125C 120% VR 67% of VR 100% 50% of VR 33% of VR % Working Voltage % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage -55C to 85C 80% 60% 40% 20% 0% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation 25C 1.00 85C 0.90 125C 0.40 KEMET Case Code EIA Case Code A B C D X E S T U V T510X T510E 3216-18 3528-21 6032-28 7343-31 7343-43 7360-38 3216-12 3528-12 6032-15 7343-20 7343-43 7360-38 Maximum Power Dissipation (P max) mWatts @ 25C w/+20C Rise 75 85 110 150 165 200 60 70 90 125 270 285 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = Z P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 9 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case A B C D L M H E1 Q R2 S2 T U V W EIA 3216-18 3528-21 6032-25 7343-31 6032-19 3528-15 7360-20 7360-38 7343-12 2012-12 3216-12 3528-12 6032-15 7343-20 7343-15 W 1.35 2.35 2.35 2.55 2.35 2.35 4.25 4.25 2.55 1.05 1.35 2.35 2.35 2.55 2.55 L 2.20 2.21 2.77 2.77 2.77 2.20 2.77 2.77 2.77 1.83 2.20 2.20 2.77 2.77 2.77 S 0.62 0.92 2.37 3.67 2.37 0.92 3.67 3.67 3.67 0.15 0.62 0.92 2.37 3.67 3.67 V1 6.02 6.32 8.92 10.22 8.92 6.32 10.22 10.22 10.22 4.82 6.02 6.32 8.92 10.22 10.22 V2 2.80 4.00 4.50 5.60 4.50 4.00 7.30 7.30 5.60 2.50 2.80 4.00 4.50 5.60 5.60 W 1.23 2.23 2.23 2.43 2.23 2.23 4.13 4.13 2.43 0.93 1.23 2.23 2.23 2.43 2.43 L 1.80 1.80 2.37 2.37 2.37 1.80 2.37 2.37 2.37 1.50 1.80 1.80 2.37 2.37 2.37 S 0.82 1.12 2.57 3.87 2.57 1.12 3.87 3.87 3.87 0.22 0.82 1.12 2.57 3.87 3.87 V1 4.92 5.22 7.82 9.12 7.82 5.22 9.12 9.12 9.12 3.72 4.92 5.22 7.82 9.12 9.12 V2 2.30 3.50 4.00 5.10 4.00 3.50 6.80 6.80 5.10 2.00 2.30 3.50 4.00 5.10 5.10 W 1.13 2.13 2.13 2.33 2.13 2.13 4.03 4.03 2.33 0.83 1.13 2.13 2.13 2.33 2.33 L 1.42 1.42 1.99 1.99 1.99 1.42 1.99 1.99 1.99 1.12 1.42 1.42 1.99 1.99 1.99 S 0.98 1.28 2.73 4.03 2.73 1.28 4.03 4.03 4.03 0.38 0.98 1.28 2.73 4.03 4.03 V1 4.06 4.36 6.96 8.26 6.96 4.36 8.26 8.26 8.26 2.86 4.06 4.36 6.96 8.26 8.26 V2 2.04 3.24 3.74 4.84 3.74 3.24 6.54 6.54 4.84 1.74 2.04 3.24 3.74 4.84 4.84 X1 Y1 7343-43 7343-40 2.55 2.55 2.77 2.77 3.67 3.67 10.22 10.22 5.60 5.60 2.43 2.43 2.37 2.37 3.87 3.87 9.12 9.12 5.10 5.10 2.33 2.33 1.99 1.99 4.03 4.03 8.26 8.26 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 10 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds 3C/seconds maximum Ramp-up Rate (TL to TP) 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/seconds Maximum Ramp Down Rate = 6C/seconds tL Tsmax Tsmin 25 tS 25C to Peak Time Construction (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 11 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Capacitor Marking KEMET Fused MnO2 Rated Voltage F+ Polarity Indicator (+) 227 10 K 230 Picofarad Code KEMET ID Date Code* * 230 = 30th week of 2012 Date Code * 1 digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 12 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 - Packaging Quantity Case Code KEMET I S T M U L W Z V A B C D Y X E/T428P H EIA 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7360-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 1,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 13 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 0.600 (0.024) T Maximum T1 Maximum 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 14 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 - 200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 56 10 72 - 200 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2010_T496 * 7/19/2013 15 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 16 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 17 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 18 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 19 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Digitally signed by Jeannette Calvo DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com Date: 2013.07.26 13:12:59 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 7/19/2013 20