HITANO ENTERPRISE CORP. RL201 THRU RL207 TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL RL201 RL202 RL203 RL204 RL205 RL206 RL207 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VDC 50 100 200 400 600 800 1000 Volts o at TA = 75 C Peak Forward Surge Current, 8.3 ms single half sine-wave IO 2.0 Amps IFSM 70 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC o Maximum DC Reverse Current at @TA = 25 C Rated DC Blocking Voltage @TA = 100 C 5.0 uAmps o IR Maximum Full Load Reverse Current Average, Full 30 o Cycle .375*(9.5mm) lead length at T L = 75 C Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range 500 CJ 20 RJA 40 TJ, TSTG -65 to + 175 Note : Measured at 1 MHZ and applied reverse voltage of 4.0 volts uAmps pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES (RL201 THRU RL207)