FHV Vishay Techno Thick Film Resistors, Through-Hole, High Voltage FEATURES * Non-inductive design * * * * Available Matched sets available Ratio dividers available Special testing available Low TCR: 200 ppm/C standard, 100 ppm/C and 50 ppm/C available * Tolerance: 10 %, 5 %, 2 %, 1 % standard tolerance and/or TCR matching available upon request MECHANICAL SPECIFICATIONS Terminal Strength: 5 pound pull test Solderability: Continuous satisfactory coverage when tested in accordance with MIL-R-10509 TEMPERATURE COEFFICIENT CODE TEMPERATURE COEFFICIENT RANGE K 100 ppm - 55 C to + 125 C N 200 ppm - 55 C to + 125 C CODE MATERIAL SPECIFICATIONS Element: High temperature fired cermet film Core: High purity 96 % alumina Coating: Conformal coat epoxy Termination: Standard lead material is tin plated copper STANDARD ELECTRICAL SPECIFICATIONS WATTAGE RATING MODEL at + 70 C 0.25 0.50 0.25 1.0 1.5 1.0 2.0 2.0 4.0 RESISTANCE () (1) 200 ppm 100 ppm 10K to 100M 10K to 100M 10K to 500M 10K to 100M 100 to 1G 500 to 500M 100 to 2G 500 to 1G 10K to 2G 1M to 1G 100 to 2G 500 to 1G 200 to 8G 500M to 1G 20K to 2G 1M to 1G 30K to 10G 1M to 1G MAXIMUM at + 125 C 0.125 0.25 0.125 0.50 0.75 0.50 1.0 1.0 2.0 VOLTAGE (kV) 0.75 1.5 3.75 7.5 11.25 3.5 15.0 7.5 15.0 FHV025 FHV050 FHV075 FHV100 FHV150 FHV160 FHV200 FHV400 FHV500 Note (1) All resistance values are calibrated at 100 V . Calibration at other voltages upon request. DC GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FHV02510K0FNEB (preferred part number format) F GLOBAL MODEL FHV H V 0 2 5 1 0 K 0 F N E B SIZE RESISTANCE VALUE TOLERANCE TCR TERMINAL FINISH PACKAGING 025 050 075 100 150 160 200 400 500 R = Decimal K = Thousand M = Million G = Billion 400R = 400 10M0 = 10 M 10G0 = 10 G F = 1.0 % G = 2.0 % J = 5.0 % K = 10.0 % K = 100 ppm N = 200 ppm E = Sn100 R = Sn60/Pb40 B = Bulk S = Strip Historical Part Numbering: FHV0251002FMe3 (will continue to be accepted) FHV 025 1002 F M e3 HISTORICAL MODEL SIZE RESISTANCE VALUE TOLERANCE TCR TERMINAL FINISH Document Number: 68001 Revision: 07-Aug-08 For technical questions, contact: te1resistors@vishay.com www.vishay.com 9 FHV Thick Film Resistors, Through-Hole, High Voltage Vishay Techno DIMENSIONS in inches [millimeters] Figure 2 Figure 1 B 0.125 [3.18] max. B 0.125 [3.18] max. A A 0.080 [2.03] Ref. 0.050 [1.27] Ref. 0.002 E [0.051] 0.100 D [2.54] D 0.100 [2.54] C C MODEL - SIZE 0.032 E 0.010 [0.25] E 0.002 [0.051] Dia. [0.813] A (max.) B (max.) C D E FIGURE FHV025 0.300 [7.62] 0.300 [7.62] 0.200 [5.08] 0.250 [6.35] 0.018 [0.457] 1 FHV050 0.380 [9.65] 0.380 [9.65] 0.200 [5.08] 0.360 [9.14] 0.020 [0.508] 1 FHV075 0.210 [5.33] 0.570 [14.48] 0.400 [10.16] 1.50 [38.10] 0.025 [0.635] 2 FHV100 0.280 [7.11] 1.07 [21.18] 0.900 [22.86] 1.50 [38.10] 0.032 [0.813] 2 FHV150 0.330 [8.38] 1.57 [39.88] 1.40 [35.56] 1.50 [38.10] 0.032 [0.813] 2 FHV160 0.550 [13.97] 0.550 [13.97] 0.400 [10.16] 1.50 [38.10] 0.032 [0.813] 2 FHV200 0.330 [8.38] 2.04 [51.82] 1.90 [48.26] 1.50 [38.10] 0.032 [0.813] 2 FHV400 0.550 [13.97] 1.05 [26.67] 0.900 [22.86] 1.50 [38.10] 0.032 [0.813] 2 FHV500 0.550 [13.97] 2.07 [52.58] 1.90 [48.26] 1.50 [38.10] 0.032 [0.813] 2 ENVIRONMENTAL PERFORMANCE DERATING TEST Short time overload < 0.2 % Moisture resistance < 0.5 % Shock < 0.2 % Vibration < 0.2 % Temperature cycling < 0.5 % Load life < 1.0 % Dielectric withstanding voltage < 0.15 % Resistance to soldering heat < 0.1 % % OF RATED POWER MAXIMUM R (Typical Test Lots) 100 80 60 40 20 0 25 75 125 175 225 275 AMBIENT TEMPERATURE IN C AVERAGE VOLTAGE COEFFICIENT ppm/V VOLTAGE COEFFICIENT 0 -5 - 10 - 15 106 107 108 025 RESISTANCE () www.vishay.com 10 109 050 1010 160 400 100 200 150 500 For technical questions, contact: te1resistors@vishay.com Document Number: 68001 Revision: 07-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1