General Purpose Relay MK * Exceptionally reliable general purpose relay. * Long life (minimum 100,000 electrical operations) assured by silver contacts. * Built-in operation indicator (mechanical, LED), diode surge suppression, Varistor surge suppression. * The contact operation can be easily checked by mechanical indicator and/or push-to-test button options. * Conforms to CENELEC standards. * VDE approved versions available. Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., MK3P5-S-AC120). Type Terminal Coil Contact form Model Mechanical indicator Standard Plug-in AC/DC LED indicator LED indicator and diode LED indicator and varistor Diode DC AC DC Varistor AC Mechanical indicator & push-to-test button DPDT MK2P-I MK2P-S 3PDT MK3P-5-I MK3P-5-S DPDT MK2PN-I MK2PN-S 3PDT MK3PN-5-I MK3PN-5-S DPDT MK2PND-I MK2PND-S 3PDT MK3PND-5-I MK3PND-5-S DPDT MK2PNV-I MK2PNV-S 3PDT MK3PNV-5-I MK3PNV-5-S DPDT MK2PD-I MK2PD-S 3PDT MK3PD-5-I MK3PD-5-S DPDT MK2PV-I MK2PV-S 3PDT MK3PV-5-I MK3PV-5-S Note: 1. Reverse polarity versions available on DC coil types. Consult your OMRON representative for further information. 2. VDE approved versions are available. Consult your OMRON representative for further information. Accessories (Order separately) To Order: Select the appropriate part numbers for sockets, clips, and mounting tracks (if required) from the available types chart. Track Mounted Sockets Relay type Model Socket Relay hold-down clip Mounting track/end plate SPDT DPDT PF083A-E PFC-A1 PFP-100N or PFP-50N and PFP-M (end plate) 3PDT PF113A-E PFC-A1 PFP-100N or PFP-50N and PFP-M (end plate) General Purpose Relay MK 1 Accessories (continued) Back Connecting Sockets Relay type Model Socket PL08 PLE08-0 PL08-Q PL11 PLE11-0 PL11-Q SPDT DPDT 3PDT Relay hold-down clip PLC-E PLC-10 PLC-E PLC-E PLC-10 PLC-E Specifications Contact Data Load 2 Pole 10 A at 250 VAC 10 A at 28 VDC Rated load Contact material Carry current Max. operating voltage Max. operating current Max. switching capacity Ag 10 A 250 VAC, 250 VDC 10 A 2,500 VA 280 W 10 mA at 1 VDC Min. permissible load Resistive load (p.f. = 1) 3 Pole 10 A at 120 VAC 10 A at 28 VDC 10 A at 250 VAC 2,500 VA/1,250 VA (NO/NC contacts) 280 W Inductive load (p.f. = 0.4) 7 A at 250 VAC 1,750 VA Coil Data AC Rated voltage (VAC) 6 12 24 50 110 120 220 240 Rated current (mA) (at 60 Hz) 360 180 88.0 39.0 21.0 18.0 11.0 9.2 Coil resistance () 3.9 16.3 68.0 338 1240 1578 5090 6737 Coil inductance (Ref. value) (H) Armature OFF Armature ON 0.0423 0.0201 0.3270 0.1666 0.6940 0.3760 3.195 1.530 13.45 7.32 15.04 7.19 49.73 27.02 58.62 32.07 Pick-up voltage Dropout Maximum voltage voltage % of rated voltage 30% min. 110% max. 80% max. Approx. (at 60 Hz) 2.7 VA 25% min. (at 50 Hz) Power consumption (mW) Approx. 2.3 VA (at 60 Hz) Approx. 2.7 VA (at 50 Hz) DC Rated voltage (VDC) 6 12 24 48 110 Rated current (mA) (at 60 Hz) 255 126 56 29.5 15.1 Coil resistance () 23.5 95 430 1630 7300 Coil inductance (Ref. value) (H) Armature OFF Armature ON 0.206 0.106 0.963 0.449 4.915 2.478 16.685 10.487 80.2 42.6 Pick-up voltage Dropout Maximum voltage voltage % of rated voltage 80% max. 15% min. 110% max. Approx. 2.7 VA Power consumption (mW) Approx. 1.5 W Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C (73F) with a tolerance of 15% for DC rated current and +15%, -20% for AC rated current. 2. The rated current is reference value. 3. Performance characteristic data are measured at a coil temperature of 23C (73F). 4. For models with the LED indicator built-in, add an LED current of approximately 0 thru 5 mA to the rated current. 2 General Purpose Relay MK Characteristics Contact resistance 50 m max. Operate time AC: 20 ms max. DC: 30 ms max. Release time 20 ms max. Operating frequency Mechanical 18,000 operations/hour Electrical 1,800 operations/hour (under rated load) Insulation resistance 100 M min. (at 500 VDC) Dielectric strength 2,500 VAC, 50/60 Hz for 1 minute between coil and contacts 1,000 VAC, 50/60 Hz for 1 minute between contacts of same poles, between terminals of the same polarity 2,500 VAC, 50/60 Hz for 1 minute between current-carrying parts, noncurrentcarrying parts, and terminals of opposite polarity Vibration Mechanical durability 10 to 55 Hz, 1.50 mm (0.06 in) double amplitude Malfunction durability 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude Shock Mechanical durability 1,000 m/s2 (approx. 100 G) Malfunction durability 100 m/s2 (approx. 10 G) Ambient temperature Operation: -10 to 40C (14 to 104F) Humidity Service Life 35 to 85% RH Mechanical 10 million operations min. (at operating frequency of 18,000 operations/hour) Electrical 100,000 operations at rated load (at operating frequency of 1,800 operations/hour) Weight Approx. 85 g (3.0 oz) Note: Data shown are of initial value. Characteristic Data Electrical service life MK2P-S, MK3P5-S Rated operating current (A) Service life (x106 operations) Maximum switching capacity MK2P-S Rated operating voltage (V) Rated operating current (A) General Purpose Relay MK 3 Dimensions Unit: mm (inch) Relays Terminal Arrangement (Bottom view) Standard type (AC/DC coil) MK2P-I, -S MK3P5-I, -S LED indicator type (AC coil) MK2PN-I, -S MK3PN-5-I, -S LED indicator type (DC coil) MK2PN-I, -S MK3PN-5-I, -S Diode type (DC coil) MK2PD-I, -S MK3PD-5-I, -S Varsitor type (AC coil) MK2PV-I, -S MK3PV-5-I, -S LED indicator and diode type (DC coil) MK2PND-I, -S MK3PND-5-I, -S LED indicator and Varsitor type (AC coil) MK2PNV-I, -S MK3PNV-5-I, -S 4 General Purpose Relay MK Accessories Track mounted socket PF083A-E (conforming to DIN EN 50022) Terminal arrangement Mounting holes Mounting dimensions of relay with socket Mounting holes Mounting dimensions of relay with socket Note: Model PF083A-E can be used as a front connecting socket. Track mounted socket PF113A-E (conforming to DIN EN 50022) Terminal arrangement Note: Model PF113A-E can be used as a front connecting socket. Back connecting socket MK2 sockets (8 pin) Printed circuit board socket PL08 (UL File No. E87929) Solder terminals PL08-Q Wire wrap terminals PLE08-0 Mounting holes PL08 PL08 type sockets and MK2 relay Total height dimension Recommended PCB layout PLE08-0 General Purpose Relay MK 5 Unit: mm (inch) Back connecting socket MK3 sockets (11 pin) Printed circuit board socket PL11 (UL File No. E87929) Solder terminals PL11-Q Wire wrap terminals PLE11-0 Mounting holes PL11 PL11 type sockets and MK3 relay Total height dimension Recommended PCB layout PLE11-0 Mounting tracks PFP-100N/PFP-50N (conforming to DIN EN 500022 PFP-100N2 (conforming to DIN EN 500022) Note: 1. *This dimension applies to mounting track PFP-50N. 2. A total of twelve 25 x 4.50 mm (0.98 x 0.18 in) elliptic holes is provided with six holes cut from each rail end at a pitch of 10 mm (0.39 in) holes. PFP-M end plate Note: Use of Type PFP-M end plate is recommended to secure the socket on the mounting track. Be sure that the engraved arrow mark on the surface of the end plate faces upward and then tighten the screw firmly with a screwdriver. 6 General Purpose Relay MK Approvals UL (File No. E41515)/CSA (File Nos. LR41408 and LR335535) Type MK2P-I, -S Contact form DPDT Coil ratings 6 to 250 VAC 6 to 110 VDC Contact ratings 10 A, 250 VAC, Resistive 10 A, 28 VDC, Resistive 7 A, 250 VAC, Inductive MK3P5-I, -S 3PDT 6 to 250 VAC 6 to 110 VDC 10 A, 120 VAC, Resistive 10 A, 28 VDC, Resistive 10 A, 250 VAC, Resistive 7 A, 250 VAC, Inductive SEV, DEMKO Type MK2P-I, -S Contact form DPDT Coil ratings 6 to 110 VDC Contact ratings 10 A, 250 VAC (NO) (coso = 1) 5 A, 250 VAC (NC) (coso = 1) 10 A, 280 VDC (NO) MK3P5-I, -S 3PDT 6 to 240 VAC 5 A, 280 VDC (NC) 7 A, 250 VAC (coso = 0.4) TUV (File No. R9051410) Type MK2P-I, -S Contact form DPDT Coil ratings 6, 12, 24, 48, 100, 110 VDC Contact ratings 10 A, 250 VAC (NO) (coso = 1) 5 A, 250 VAC (NC) (coso = 1) 10 A, 280 VDC (NO) MK3P5-I, -S 3PDT 6, 12, 24, 50, 110, 115, 120, 200, 220, 230, 240 VAC 5 A, 280 VDC (NC) 7 A, 250 VAC (coso = 0.4) Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics individually defined in this catalog. 2. VDE, Nemko and Semko versions are available. Please consult your OMRON representative for further information. 3. In the interest of product improvement, specifications are subject to change. General Purpose Relay MK 7 Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. 8 General Purpose Relay MK (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses ( including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and description may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c)disclosure to non-citizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. General Purpose Relay MK 9 Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. J01C-E-01 10 01/07 General Purpose Relay MK Specifications subject to change without notice Printed in USA