Type 160 Metallized Polyester Radial Lead Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Radial Box Metallized Polyester Capacitors
Specications Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
The Type 160 series radial lead metallized polyester box
capacitors are constructed in rugged rectangular plastic
cases with lead spacings that are standard in the electron-
ics industry. All Type 160 capacitors are available in bulk
with a .217” ±.039” lead length, and they are good for
general purpose applications such as bypass, decoupling,
energy storage/discharge and arc suppression.
Highlights
• RoHS compliant
• Rugged plastic case
• Case and epoxy ll meets UL94V0
• 10 mm through 27.5 mm lead spacings
• Non-inductively wound
• Non-polar
• Wire lead material, tinned copper clad steel
RoHS Compliant
0.0022 µF to 10.0 µF
63 Vdc to 1000 Vdc
±5%, ±10%, ±20%
–55 ºC to +125 ºC (derating voltage to 1.25% per ºC above
85 ºC)
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
tanδ x 10–4 at 25 ºC ±5 ºC
kHz C ≤1 µF C >1 µF
1 ≤100 ≤100
10 ≥150
Total Self Inductance (L):
Long Term Stability (after two years):
Corona (Partial Discharge Inception Voltage):
Maximum Pulse Rise Time (dv/dt):
Pitch (mm) 10 15 22.5 27.5
L (nH) ≈ 9 10 18 18
Capacitance change ∆C/C ≤ ±3% under standard
environmental conditions
200 Vac for 100 Vdc, 200 Vdc
250 Vac for 400 Vdc, 630 Vdc
300 Vac for 1000 Vdc
Pitch (mm)
Vn 10 15 22.5 27.5
63
100/160
250
400
630
1000
3
6/8
11
20
30
60
1.5
3
7
10
15
25
1
2
4
5.5
8
15
1
1
3
5
7
10
If the working voltage (V) is less than the nominal voltage (Vn),
the capacitor can work at higher dv/dt. In this case, the maximum
value allowed is obtained by multiplying the above value with
the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
Test Method and Performance
Capacitor Outline Drawing
L
Max
T
Max
H
Max
S
±0.016
(±0.5 mm)
.196 -.040 / +0.06
(5.0 -1 / +1.5 mm)
Ød
±0.003
(±0.076 mm)
Note: The lead diameter is a maximum dimension
for lead spacing ≤15 mm and a nominal for lead
spacing >15 mm
Soldering
Test Conditions
Soldering Temperature
Soldering Duration
260 ºC ±5 ºC
10 sec ±1 sec
Performance
Capacitance Change ∆C/C
DF Change ∆tgδ
≤ ±2%
≤30 x 10
–4
at 10 kHz for C ≤1.0 µF
≤20 x 10
–4
at 1 kHz for C >1.0 µF
Insulation Resistance
Test Conditions
Temperature 25 ºC ±5 ºC
Voltage Charge Time 1 minute
Voltage Charge 50 Vdc for Vn < 100 Vdc
100 Vdc for Vn ≥ 100 Vdc
Performance
For Vn > 100 Vdc ≥30,000 MΩ for ≤ 0.33µF
≥10,000 MΩ x µF for C > 0.33µF
For Vn ≤100 Vdc ≥10,000 MΩ for C ≤ 0.1µF
≥1,000 MΩ x µF for ≤ 0.1µF
Damp Heat Test
Test Conditions
Temperature +40 ºC
Relative Humidity
95%
Test Duration 21 days
Performance
Capacitance Change ∆C/C ≤ ±5%
DF Change ∆tgδ ≤50 x 104 at 1 kHz
Insulation Resistance ≥ 50% of limit value
Life Test
Test Conditions
Temperature +85 ºC
Test Duration 1000 hrs
Voltage Applied 1.25 x Vn
Performance
Capacitance Change ∆C/C ≤ ±5%
DF Change ∆tgδ ≤30 x 10–4 at 10 kHz for C ≤1.0 µF
≤20 x 10–4 at 1 kHz for C >1.0 µF
Insulation Resistance ≥ 50% of limit value
Ratings RoHS Compliant
Cap
(µF)
Catalog
Part Number
Inches Millimeters
L T H S Ød L T H S Ød
63 Vdc
.22
.27
.33
160224*63D–F
160274*63D–F
160334*63E–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
5.0
5.0
6.0
11.0
11.0
12.0
10.0
10.0
10.0
0.8
0.8
0.8
.39
.47
.56
160394*63E–F
160474*63E–F
160564*63D–F
0.512
0.512
0.512
0.157
0.197
0.197
0.374
0.433
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
6.0
6.0
5.0
12.0
12.0
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.68
.68
.82
160684*63D–F
160684*63G–F
160824*63E–F
0.512
0.709
0.512
0.197
0.236
0.236
0.433
0.472
0.472
0.394
0.591
0.394
0.031
0.031
0.031
13.0
18.0
13.0
5.0
6.0
6.0
11.0
12.0
12.0
10.0
15.0
10.0
0.8
0.8
0.8
.82
1.0
160824*63H–F
160105*63H–F
0.709
0.709
0.197
0.197
0.433
0.433
0.591
0.591
0.031
0.031
18.0
18.0
7.5
7.5
13.5
13.5
15.0
15.0
0.8
0.8
1.5
2.2
3.3
160155*63G–F
160225*63H–F
160335*63M–F
0.709
0.709
1.043
0.236
0.295
0.276
0.472
0.531
0.650
0.591
0.591
0.886
0.031
0.031
0.031
18.0
18.0
18.0
6.0
7.5
10.0
12.5
14.0
16.0
15.0
15.0
15.0
0.8
0.8
0.8
4.7
6.8
10.0
160475*63N–F
160685*63O–F
160106*63P–F
1.043
1.043
1.260
0.335
0.394
0.433
0.669
0.748
0.787
0.886
0.886
1.083
0.031
0.031
0.031
26.5
26.5
26.5
8.5
10.0
13.0
17.0
19.0
23.0
22.5
22.5
22.5
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
Type 160 Metallized Polyester Radial Lead Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
RoHS Compliant
Cap
(µF)
Catalog
Part Number
Inches Millimeters
L T H S Ød L T H S Ød
100 Vdc
.10
.12
.15
160104*100C–F
160124*100C–F
160154*100C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.18
.22
.27
160184*100C–F
160224*100D–F
160274*100D–F
0.512
0.512
0.512
0.157
0.197
0.197
0.374
0.433
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
5.0
5.0
9.5
11.0
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.33
.33
.39
160334*100E–F
160334*100F–F
160394*100E–F
0.512
0.709
0.512
0.236
0.197
0.236
0.472
0.433
0.472
0.394
0.591
0.394
0.031
0.031
0.031
13.0
18.0
13.0
6.0
5.0
6.0
12.0
11.0
12.0
10.0
15.0
10.0
0.8
0.8
0.8
.39
.47
.47
160394*100F–F
160474*100E–F
160474*100F–F
0.709
0.512
0.709
0.197
0.236
0.197
0.433
0.472
0.433
0.591
0.394
0.591
0.031
0.031
0.031
18.0
13.0
18.0
5.0
6.0
5.0
11.0
12.0
11.0
15.0
10.0
15.0
0.8
0.8
0.8
.56
.68
.82
160564*100G–F
160684*100G–F
160824*100H–F
0.709
0.709
0.709
0.236
0.236
0.295
0.472
0.472
0.531
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
6.0
6.0
7.5
12.0
12.0
13.5
15.0
15.0
15.0
0.8
0.8
0.8
1.0
1.5
2.2
160105*100H–F
160155*100M–F
160225*100N–F
0.709
1.043
1.043
0.295
0.276
0.335
0.531
0.650
0.669
0.591
0.886
0.886
0.031
0.031
0.031
18.0
26.5
26.5
7.5
7.0
8.5
13.5
16.5
17.0
15.0
22.5
22.5
0.8
0.8
0.8
3.3
4.7
6.8
10.0
160335*100O–F
160475*100P–F
160685*100Q–F
160106*100S–F
1.043
1.260
1.260
1.457
0.394
0.433
0.512
0.709
0.748
0.787
0.886
1.299
0.886
1.083
1.083
1.083
0.031
0.031
0.031
0.031
26.5
32.0
32.0
37.0
10.0
11.0
13.0
18.0
19.0
20.0
22.5
33.0
22.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
160 Vdc
.10 160104*160C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8
250 Vdc
.033
.039
.047
160333*250C–F
160393*250C–F
160473*250C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.056
.068
.082
160563*250C–F
160683*250C–F
160823*250D–F
0.512
0.512
0.512
0.157
0.157
0.197
0.374
0.374
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
5.0
9.5
9.5
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.10
.10
.12
160104*250D–F
160104*250F–F
160124*250D–F
0.512
0.709
0.512
0.197
0.197
0.236
0.433
0.433
0.472
0.394
0.591
0.394
0.031
0.031
0.031
13.0
18.0
13.0
5.0
5.0
6.0
11.0
11.0
12.0
10.0
15.0
10.0
0.8
0.8
0.8
.12
.15
.15
160124*250F–F
160154*250E–F
160154*250F–F
0.709
0.512
0.709
0.197
0.236
0.197
0.433
0.472
0.433
0.591
0.394
0.591
0.031
0.031
0.031
18.0
13.0
18.0
5.0
6.0
5.0
11.0
12.0
11.0
15.0
10.0
15.0
0.8
0.8
0.8
.18
.18
.22
160184*250E–F
160184*250F–F
160224*250F–F
0.512
0.709
0.709
0.236
0.197
0.197
0.472
0.433
0.433
0.394
0.591
0.591
0.031
0.031
0.031
13.0
18.0
18.0
6.0
5.0
5.0
12.0
11.0
11.0
10.0
15.0
15.0
0.8
0.8
0.8
.27
.33
.39
160274*250G–F
160334*250G–F
160394*250H–F
0.709
0.709
0.709
0.236
0.236
0.295
0.472
0.472
0.531
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
6.0
6.0
7.5
12.0
12.0
13.5
15.0
15.0
15.0
0.8
0.8
0.8
.47
.47
.56
160474*250H–F
160474*250L–F
160564*250I–F
0.709
1.043
0.709
0.295
0.236
0.335
0.531
0.591
0.571
0.591
0.886
0.591
0.031
0.031
0.031
18.0
26.5
18.0
7.5
6.0
8.5
13.5
15.0
14.5
15.0
22.5
15.0
0.8
0.8
0.8
.56
.68
.68
.82
160564*250M–F
160684*250I–F
160684*250M–F
160824*250M–F
1.043
0.709
1.043
1.043
0.276
0.335
0.276
0.335
0.650
0.571
0.650
0.669
0.886
0.591
0.886
0.886
0.031
0.031
0.031
0.031
26.5
18.0
26.5
26.5
7.0
8.5
7.0
8.5
16.5
14.5
16.5
17.0
22.5
15.0
22.5
22.5
0.8
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
RoHS Compliant
Cap
(µF)
Catalog
Part Number
Inches Millimeters
L T H S Ød L T H S Ød
250 Vdc
1.0
1.5
2.2
160105*250N–F
160155*250O–F
160225*250P–F
1.043
1.043
1.260
0.335
0.394
0.433
0.669
0.748
0.787
0.886
0.886
1.083
0.031
0.031
0.031
26.5
26.5
32.0
8.5
10.0
11.0
17.0
19.0
20.0
22.5
22.5
27.5
0.8
0.8
0.8
3.3
4.7
6.8
160335*250Q–F
160475*250R–F
160685*250S–F
1.260
1.260
1.457
0.512
0.591
0.709
0.886
1.181
1.299
1.083
1.083
1.083
0.031
0.031
0.031
32.0
32.0
37.0
13.0
15.0
18.0
22.5
30.0
33.0
27.5
27.5
27.5
0.8
0.8
0.8
400 Vdc
.012
.015
.018
160123*400C–F
160153*400C–F
160183*400C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.022
.027
.033
160223*400C–F
160273*400C–F
160333*400D–F
0.512
0.512
0.512
0.157
0.157
0.197
0.374
0.374
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
5.0
9.5
9.5
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.039
.047
.047
160393*400D–F
160473*400E–F
160473*400F–F
0.512
0.512
0.709
0.197
0.236
0.197
0.433
0.472
0.433
0.394
0.394
0.591
0.031
0.031
0.031
13.0
13.0
18.0
5.0
6.0
5.0
11.0
12.0
11.0
10.0
10.0
15.0
0.8
0.8
0.8
.056
.068
.082
160563*400F–F
160683*400F–F
160823*400F–F
0.709
0.709
0.709
0.197
0.197
0.197
0.433
0.433
0.433
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
5.0
5.0
5.0
11.0
11.0
11.0
15.0
15.0
15.0
0.8
0.8
0.8
.10
.12
.15
160104*400G–F
160124*400G–F
160154*400H–F
0.709
0.709
0.709
0.236
0.236
0.295
0.472
0.472
0.531
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
6.0
6.0
7.5
12.0
12.0
13.5
15.0
15.0
15.0
0.8
0.8
0.8
.15
.18
.22
160154*400L–F
160184*400L–F
160224*400L–F
1.043
1.043
1.043
0.236
0.236
0.236
0.591
0.591
0.591
0.886
0.886
0.886
0.031
0.031
0.031
26.5
26.5
26.5
6.0
6.0
6.0
15.0
15.0
15.0
22.5
22.5
22.5
0.8
0.8
0.8
.27
.33
.39
160274*400M–F
160334*400M–F
160394*400N–F
1.043
1.043
1.043
0.276
0.276
0.335
0.650
0.650
0.669
0.886
0.886
0.886
0.031
0.031
0.031
26.5
26.5
26.5
7.0
7.0
8.5
16.5
16.5
17.0
22.5
22.5
22.5
0.8
0.8
0.8
.47
.56
.68
160474*400N–F
160564*400O–F
160684*400P–F
1.043
1.043
1.260
0.335
0.394
0.433
0.669
0.748
0.787
0.886
0.886
1.083
0.031
0.031
0.031
26.5
26.5
32.0
8.5
10.0
11.0
17.0
19.0
20.0
22.5
22.5
27.5
0.8
0.8
0.8
.82
1.0
1.0
160824*400P–F
160105*400P–F
160105*400Q–F
1.260
1.260
1.260
0.433
0.433
0.512
0.787
0.787
0.886
1.083
1.083
1.083
0.031
0.031
0.031
32.0
32.0
32.0
11.0
11.0
13.0
20.0
20.0
22.5
27.5
27.5
27.5
0.8
0.8
0.8
630 Vdc
.0039
.0047
.0056
160392*630C–F
160472*630C–F
160562*630C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.0068
.0082
.010
160682*630C–F
160822*630C–F
160103*630C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.012
.015
.018
160123*630D–F
160153*630D–F
160183*630D–F
0.512
0.512
0.512
0.197
0.197
0.197
0.433
0.433
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
5.0
5.0
5.0
11.0
11.0
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.022
.027
.033
160223*630E–F
160273*630F–F
160333*630F–F
0.512
0.709
0.709
0.236
0.197
0.197
0.472
0.433
0.433
0.394
0.591
0.591
0.031
0.031
0.031
13.0
18.0
18.0
6.0
5.0
5.0
12.0
11.0
11.0
10.0
15.0
15.0
0.8
0.8
0.8
.039
.047
.056
160393*630G–F
160473*630G–F
160563*630G–F
0.709
0.709
0.709
0.236
0.236
0.236
0.472
0.472
0.472
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
6.0
6.0
6.0
12.0
12.0
12.0
15.0
15.0
15.0
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
Type 160 Metallized Polyester Radial Lead Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
RoHS Compliant
Cap
(µF)
Catalog
Part Number
Inches Millimeters
L T H S Ød L T H S Ød
630 Vdc
.068
.068
.082
160683*630H–F
160683*630L–F
160823*630L–F
0.709
1.043
1.043
0.295
0.236
0.236
0.531
0.591
0.591
0.591
0.886
0.886
0.031
0.031
0.031
18.0
26.5
26.5
7.5
6.0
6.0
13.5
15.0
15.0
15.0
22.5
22.5
0.8
0.8
0.8
.10
.12
.15
160104*630L–F
160124*630M–F
160154*630M–F
1.043
1.043
1.043
0.236
0.276
0.276
0.591
0.650
0.650
0.886
0.886
0.886
0.031
0.031
0.031
26.5
26.5
26.5
6.0
7.0
7.0
15.0
16.5
16.5
22.5
22.5
22.5
0.8
0.8
0.8
.18
.22
.27
160184*630N–F
160224*630N–F
160274*630Q–F
1.043
1.043
1.260
0.335
0.335
0.512
0.669
0.669
0.886
0.886
0.886
1.083
0.031
0.031
0.031
26.5
26.5
32.0
8.5
8.5
13.0
17.0
17.0
22.5
22.5
22.5
27.5
0.8
0.8
0.8
.33
.39
.47
160334*630P–F
160394*630P–F
160474*630Q–F
1.260
1.260
1.260
0.433
0.433
0.512
0.787
0.787
0.886
1.083
1.083
1.083
0.031
0.031
0.031
32.0
32.0
32.0
11.0
11.0
13.0
20.0
20.0
22.5
27.5
27.5
27.5
0.8
0.8
0.8
1000 Vdc
.0022
.0027
.0033
160222*1000C–F
160272*1000C–F
160332*1000C–F
0.512
0.512
0.512
0.157
0.157
0.157
0.374
0.374
0.374
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
4.0
4.0
4.0
9.5
9.5
9.5
10.0
10.0
10.0
0.8
0.8
0.8
.0039
.0047
.0056
160392*1000D–F
160472*1000D–F
160562*1000D–F
0.512
0.512
0.512
0.197
0.197
0.197
0.433
0.433
0.433
0.394
0.394
0.394
0.031
0.031
0.031
13.0
13.0
13.0
5.0
5.0
5.0
11.0
11.0
11.0
10.0
10.0
10.0
0.8
0.8
0.8
.0068
.0082
.010
160682*1000D–F
160822*1000D–F
160103*1000F–F
0.512
0.512
0.709
0.197
0.197
0.197
0.433
0.433
0.433
0.394
0.394
0.591
0.031
0.031
0.031
13.0
13.0
18.0
5.0
5.0
5.0
11.0
11.0
11.0
10.0
10.0
15.0
0.8
0.8
0.8
.012
.015
.018
160123*1000F–F
160153*1000F–F
160183*1000G–F
0.709
0.709
0.709
0.197
0.236
0.236
0.433
0.472
0.472
0.591
0.591
0.591
0.031
0.031
0.031
18.0
18.0
18.0
5.0
6.0
6.0
11.0
12.0
12.0
15.0
15.0
15.0
0.8
0.8
0.8
.022
.027
.033
160223*1000G–F
160273*1000H–F
160333*1000L–F
0.709
0.709
1.043
0.236
0.295
0.236
0.472
0.531
0.591
0.591
0.591
0.886
0.031
0.031
0.031
18.0
18.0
26.5
6.0
7.5
6.0
12.0
13.5
15.0
15.0
15.0
22.5
0.8
0.8
0.8
.039
.047
.056
160393*1000L–F
160473*1000L–F
160563*1000M–F
1.043
1.043
1.043
0.236
0.236
0.276
0.591
0.591
0.650
0.886
0.886
0.886
0.031
0.031
0.031
26.5
26.5
26.5
6.0
6.0
7.0
15.0
15.0
16.5
22.5
22.5
22.5
0.8
0.8
0.8
.068
.082
.10
160683*1000M–F
160823*1000N–F
160104*1000N–F
1.043
1.043
1.043
0.276
0.335
0.335
0.650
0.669
0.669
0.886
0.886
0.886
0.031
0.031
0.031
26.5
26.5
26.5
7.0
8.5
8.5
16.5
17.0
17.0
22.5
22.5
22.5
0.8
0.8
0.8
.12
.15
.18
.22
160124*1000O–F
160154*1000P–F
160184*1000Q–F
160224*1000Q–F
1.043
1.260
1.260
1.260
0.394
0.433
0.512
0.512
0.748
0.787
0.886
0.886
0.886
1.083
1.083
1.083
0.031
0.031
0.031
0.031
26.5
32.0
32.0
32.0
10.0
11.0
13.0
13.0
19.0
20.0
22.5
22.5
22.5
27.5
27.5
27.5
0.8
0.8
0.8
0.8
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
Part Numbering System
160 104 K 100 C –F
Series
160
Capacitance
392 = .0039 µF
103 = .01 µF
104 = .1 µF
105 = 1.0 µF
Tolerance
J = ±5%
K = ±10%
M = ±20%
Voltage
100 = 100 Vdc
250 = 250 Vdc
630 = 630 Vdc
1000 = 1000 Vdc
Case
Code
C
D
E
F
etc.
ROHS
Compliant
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 160 Metallized Polyester Radial Lead Capacitors
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, conrming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specic customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.